- Devel - libvirt List Archives

[Libvir] Xen reboot does not work with Sys::Virt perl binding
by Keck, Christian (ext) 19 Jul '07

19 Jul '07

Hello guys! I am using the perl bindings (Sys::Virt) to manage my virtual xen hosts. Because it directly maps the C api, I thought it's a good idea to ask you instead of the author of this module. Xen version is 3.0 with libvirt 0.1.9 on a red hat box. while calling the reboot method i get following error: libvirt error code: 0, message: Unknown problem In this case the virtual system does not reboot. But with shutdown method, which throw the same error, the system shuts down correctly. Here is my code: my $vmm = Sys::Virt->new(); my $dom = eval { $vmm->get_domain_by_name( $p->{ name } ) }; $dom->reboot(&Sys::Virt::Domain::REBOOT_RESTART); Is this a known issue? Thank you for your help. Best regards, Christian

2 2

[Libvir] RFC: format for mapping host devices to guest
by Daniel P. Berrange 19 Jul '07

19 Jul '07

I'm considering the problem of mapping host USB devices through to the guest as one of the 2 remaining bits of USB support needed (the other being the mapping disks through as USB mass storage). I have previously mentioned some ideas in this mail, though looking back on this I don't much like them https://www.redhat.com/archives/libvir-list/2007-March/msg00205.html Also, there was just the message about a desire to support mapping of PCI devices. The USB stuff I want todo with both Xen and QEMU. In Xen, USB device passthrough is based on: usbdevice=host:[bus id].[device id] eg usbdevice=host:003.001 Or usbdevice=host:[vendor id]:[product id] eg usbdevice=host:0483:2016 In QEMU, USB device passthrough is pretty much the same with command line args: -usbdevice host:[bus id].[device id] eg -usbdevice host:003.001 Or -usbdevice host:[vendor id]:[product id] eg -usbdevice host:0483:2016 Finally, in Xen, PCI device passthrough is done with pci=['pci device id',....] eg pci=['00:1f.3'] So we need some form of element under the <devices> section per device to map through. At minimum this will need the source device info. If we are to support unplugging of USB devices in QEMU it is neccessary to have the target device id - this is generated by QEMU when attaching the USB device. So to attach a device: <host bus='usb'> <source device="003.001"/> </host> Or <host bus='usb'> <source vendor='0483' product='2016'> </host> The first form is useful for live hotplug - where you know the exact device instance. The second form is useful for permanent config - you don't know what device id it'll have since it may be plugged into the host in any order. When splitting the XML back out, QEMU would fill in the target info giving us either: <host bus='usb'> <source dev='003.001'/> <target dev='001.005'/> </host> Or <host bus='usb'> <source vendor='0483' product='2016'/> <target dev='001.005'/> </host> This is suitable for giving to virDomainDetachDevice() - we use the target dev for the QEMU monitor 'usb-detach' command. Now PCI would be similar - no hotplug to worry about here though, and no need (or availability) or target info. So the XML would simply be <host bus='pci'> <source dev='00:1f.3'/> </host> NB I choose 'host' as the element name since we're basically giving the guest an arbitrary host device. My previous email had thought about calling it 'bus' but we're not really defining a bus in this context and there may very well be some scenario in the future where we do need to represent the concept of a 'bus' in the XML directly. Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

2 3

[Libvir] [PATCH]3/3 OpenVZ driver : qemu_driver.c changes
by Shuveb Hussain 19 Jul '07

19 Jul '07

-- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

1 0

[Libvir] [PATCH]2/3 OpenVZ driver : generic utils
by Shuveb Hussain 19 Jul '07

19 Jul '07

-- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

1 0

[Libvir] [PATCH]1/3 OpenVZ driver : Cleanups
by Shuveb Hussain 19 Jul '07

19 Jul '07

Cleanup patch, also adds utils.c and utils.h to Makefile.am -- Shuveb Hussain Unix is very user friendly. It is just a little choosy about who its friends are http://www.binarykarma.com

1 0

[Libvir] PATCH: Fix accident close of monitor FD & leak of logfile FD to child
by Daniel P. Berrange 19 Jul '07

19 Jul '07

After the QEMU monitor filehandle has been successfully initialized, we then promptly close it ! It seems a 'return' statement accidentally got removed somewhere during previously refactoring. Second, the QEMU logfile does not have the close-on-exec flag set so the logfile is leaked to child processes. qemu_driver.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

2 1

[Libvir] XM config <-> XML config
by Arik Raffael Funke 19 Jul '07

19 Jul '07

Hi, I am using Fedora 7 with virt-manager to control my xen domains. I would like to delegate a pci device to one of my domU's. I know how this is done in the XM and sxp config files, but how is it done now? I read that libvirt can convert XM <-> XML and though I could export my current config to XM format, edit it and reimport. How is is done with libvirt? Thanks, Arik

2 3

[Libvir] PATCH: Support input devices in XML format
by Daniel P. Berrange 18 Jul '07

18 Jul '07

This patch is the first step towards supporting USB devices in libvirt XML format. As per the original thread some months back[1], I'm the grouping is being done based on device classes, rather than bus types. So this first patch is actually introducing the concept of 'input' devices. This is best illustrated by examples - PS2 mouse - automatically added when yuou turn on <graphics> in an HVM guest. <input type='mouse' bus='ps2'/> - Xen mouse - automatically added when you turn on <graphics> in a Xen paravirt guest (ie the paravirt input device) <input type='mouse' bus='xen'/> - USB mouse - have to actually ask for this. Not all that useful since its still using relative co-ordinates, but here for completeness. <input type='mouse' bus='usb'/> - USB tablet - have to actually ask for this. Very useful. Windows and Linux can both drive this in absolute co-ordinate mode. <input type='tablet' bus='usb'/> If it possible to omit the 'bus' attribute, in which case it'll automatically set up the device on the most appropriate bus for that type of device. So if you say type='mouse', it'll pick a ps2/xen bus. If you say type='tablet' it'll pick a usb bus. In my previous email[1] I suggested a possible 'model' attribute as well. I since discovered that Xen removed support for the summagraphics tablet completely, so adding a model at this time is a waste of time. We can always choose it add it later if we port to another virt manager here we need to distinguish devices on more than just a (type, bus) pair. As with the previous '<clock/>' element, it is intended that virt-install and virt-manager will automatically add a USB tablet if they you tell them you're installing Windows, or a recent Linux guest. It'll also be possible manally add post-install through the virt-manager UI. For the QEMU driver at least, I intend to make it possible to hot add & remove USB devices. This will appear as impl of virAttach/Detch methods for QEMU at least. Xen doesn't support hot add/remove of USB at this time. Finally, before I actually commit this I think it is well overdue to write some unit tests for the QEMU driver. So I'm going to do a test which chceks XML -> data struct -> QEMU command line, and XML -> data struct -> XML sequences of operations. This should let us exercise all the XML related code in QEMU which is a good start & helpful to avoid regressions. Regards, Dan. [1] http://www.redhat.com/archives/libvir-list/2007-March/msg00205.html -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

3 6

[Libvir] Asynchronous notifications of domain start/stop
by Richard W.M. Jones 18 Jul '07

18 Jul '07

I had some private discussions with a developer who wants to start using libvirt, but requires asynch notifications of domain start/stop (and other stuff, but this will do for the moment). Right now he's using XenStore watches. The alternative of polling didn't look very appealing for him. A rough API for this might look like this: typedef int virEventHandle; /* Register a callback to catch domain start events. */ virEventHandle virEventDomainStart (virConnectPtr, void (*f) (virConnectPtr, int domid)); /* Register a callback to catch domain stop events. */ virEventHandle virEventDomainStop (virConnectPtr, void (*f) (virConnectPtr, int domid)); /* Unregister any type of callback. */ int virEventCancel (virConnectPtr, virEventHandle handle); Implementation -------------- In the Xen case, we can use XenStore watches[1]. Callbacks from XenStore can be translated directly into event callbacks. In the qemu case, the daemon knows when the qemu instances that it manages come and go. In the qemu/remote case, asynch notifications are nominally supported by the protocol, but I haven't really looked at all the implications. Seems like we'd need to use MSG_OOB to signal the client process, and translate the SIGURG signal received into a callback. This is all tricky and Unix-specific though so if you have any better ideas ... We would also need to avoid mixing ordinary request/response with the notifications, which OOB takes care of. Rich. [1] http://wiki.xensource.com/xenwiki/XenBusDriver -- Emerging Technologies, Red Hat - http://et.redhat.com/~rjones/ Registered Address: Red Hat UK Ltd, Amberley Place, 107-111 Peascod Street, Windsor, Berkshire, SL4 1TE, United Kingdom. Registered in England and Wales under Company Registration No. 03798903

4 17

[Libvir] virDomainConfigureDevice?
by Hugh Brock 18 Jul '07

18 Jul '07

I'm looking at ways to replicate xm block-configure at the libvirt level. xm block-configure is useful in that it allows you to change the back device for an HVM guest while the guest is still running; this permits you for example to change the CDROM without shutting down your guest or poking around in xenstore. Thus we can have an "eject" button on cdrom devices in virt-manager (or "eject" and "load" buttons, I guess), which we really need. The issue of course is that xm block-configure is specifically intended for block devices and takes arguments for the back device and the front device (among others). We would naturally prefer to accept a block of XML just as virDomainAttachDevice does and then parse it, determine if the device in question is of a type we can actually edit, determine if the new backdev is appropriate, and so on. None of this seems terribly hard, but before I go implement it, are there obvious pitfalls I'm not thinking? And given that virDomainAttachDevice is not implemented for qemud in libvirt (is it?), how do we handle the non-xen case? Thanks, --Hugh -- Red Hat Virtualization Group http://redhat.com/virtualization Hugh Brock | virt-manager http://virt-manager.org hbrock(a)redhat.com | virtualization library http://libvirt.org

4 7