November 2017 - Devel - libvirt List Archives

[libvirt] [PATCH 0/7] Keep non-persistent changes alive in snapshot
by Kothapally Madhu Pavan 08 Feb '18

08 Feb '18

Restoring to a snapshot should not overwrite the persistent XML configuration of a snapshot as a side effect. This patchset fixes the same. Currently, virDomainSnapshotDef only saves active domain definition of the guest. And on restore the active domain definition is used as both active and inactive domain definitions. This will make the non-persistent changes persistent in snapshot image. This patchset allows to save inactive domain definition as well and on snapshot-revert non-persistent configuration is restored as is. Currently, snapshot-revert is making non-presistent changes as persistent. Here are the steps to reproduce. Step1: virsh define $dom Step2: virsh attach-device $dom $memory-device.xml --live Step3: virsh snapshot-create $dom Step4: virsh destroy $dom Step5: virsh snapshot-revert $dom $snapshot-name Step6: virsh destroy $dom Step7: virsh start $dom Here we still have $memory-device attached in Step2. This patchset is attempting to solve this issue. This patchset will also allow user to dump and edit inactive XML configuration of a snapshot. Dumping inactive domain definition of a snapshot is important as --redefine uses snapshot-dumpxml output to redefine a snapshot. Kothapally Madhu Pavan (7): qemu: Store inactive domain configuration in snapshot qemu: Use active and inactive snapshot configuration on restore conf: Allow editing inactive snapshot configuration virsh: Dump inactive XML configuration of snapshot using snapshot-dumpxml virsh: Edit inactive XML configuration of snapshot using snapshot-edit virsh: Allow restoring snapshot with non-persistent configuration tests: docs: Add schema and testcase for domainsnapshot docs/schemas/domainsnapshot.rng | 19 +++++ include/libvirt/libvirt-domain-snapshot.h | 10 ++- include/libvirt/libvirt-domain.h | 1 + src/conf/domain_conf.c | 6 +- src/conf/domain_conf.h | 2 + src/conf/snapshot_conf.c | 48 ++++++++++++- src/conf/snapshot_conf.h | 1 + src/qemu/qemu_driver.c | 33 ++++++++- .../full_domain_withinactive.xml | 83 ++++++++++++++++++++++ tests/domainsnapshotxml2xmltest.c | 1 + tools/virsh-snapshot.c | 20 ++++++ tools/virsh.pod | 37 +++++++++- 12 files changed, 251 insertions(+), 10 deletions(-) create mode 100644 tests/domainsnapshotxml2xmlout/full_domain_withinactive.xml -- 1.8.3.1

4 16

[libvirt] PATCH add q35 support ide
by Paul Schlacter 03 Feb '18

03 Feb '18

hello everyone: In q35 motherboard use ide, Currently, the qemu has supported q35 Motherboard support ide bus diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index cc7596b..2dbade8 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -7188,6 +7188,7 @@ bool qemuDomainMachineHasBuiltinIDE(const char *machine) { return qemuDomainMachineIsI440FX(machine) || + qemuDomainMachineIsQ35(machine) || STREQ(machine, "malta") || STREQ(machine, "sun4u") || STREQ(machine, "g3beige"); [root@kvm ~]# virsh dumpxml instance-00000004 | grep machine= <type arch='x86_64' machine='pc-q35-rhel7.3.0'>hvm</type> [root@kvm~]# [root@kvm~]# virsh dumpxml instance-00000004 | grep "'disk'" -A 13 <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none'/> <source file='/var/lib/nova/instances/288271ce-69eb-4629-b98c- 779036661294/disk'/> <backingStore type='file' index='1'> <format type='raw'/> <source file='/var/lib/nova/instances/_base/ 8d383eef2e628adfc197a6e40e656916de566ab1'/> <backingStore/> </backingStore> <target dev='vda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk>

3 3

[libvirt] [PATCH v5 0/3] daemon: fix termination/reload issues
by John Ferlan 25 Dec '17

25 Dec '17

v4: https://www.redhat.com/archives/libvir-list/2017-October/msg01249.html Difference to v4 - inserted a patch to handle the Unref possibilities in virLockDaemonNew when either the @srv is placed into the daemon net server hash table or if virNetDaemonNew fails. Patch 3 has a minor change (from previous review) to not set dmn->servers = NULL allowing the virHashFree in virNetDaemonDispose. John Ferlan (1): lockd: Need to Unref @srv when done with it. Nikolay Shirokovskiy (2): virtlogd: add missing netserver refcount increment on reload libvirtd: fix crash on termination src/locking/lock_daemon.c | 4 ++++ src/rpc/virnetdaemon.c | 2 ++ 2 files changed, 6 insertions(+) -- 2.13.6

6 43

[libvirt] [PATCH] Let virt-manager 1.4.0+ work to access console of VM
by Bryan Quigley 19 Dec '17

19 Dec '17

Also see Ubuntu bug https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1668681 First reported https://askubuntu.com/questions/833964/virt-manager-cant-connect-to-graphic… --- examples/apparmor/libvirt-qemu | 3 +++ 1 file changed, 3 insertions(+) diff --git a/examples/apparmor/libvirt-qemu b/examples/apparmor/libvirt-qemu index a9020aa..19d99e5 100644 --- a/examples/apparmor/libvirt-qemu +++ b/examples/apparmor/libvirt-qemu @@ -151,3 +151,6 @@ /etc/udev/udev.conf r, /sys/bus/ r, /sys/class/ r, + + # allow connect with openGraphicsFD to work + unix (send, receive) type=stream peer=(label=/usr/sbin/libvirtd), -- 2.10.2

3 5

[libvirt] [PATCH v3] qemu: change monitor.sock from /var/lib/libvirt/qemu/domain-*** to /var/run/libvirt/qemu/domain-***
by xinhua.Cao 15 Dec '17

15 Dec '17

directory /var/lib alway is Persistence directory, but in redhat system, /var/run is memory directory. our running domain xml is saved at /var/run/libvirt/qemu. so if we cold reset system, the /var/run/libvirt/qemu directory is clear, but /var/lib/libvirt/qemu/domain-*** is saved., so there have same /var/lib/libvirt/qemu/domain-*** directory will be left over at system cold reset. --- src/qemu/qemu_domain.c | 2 +- tests/qemuxml2argvtest.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 13e77ee..67da8fa 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -1713,7 +1713,7 @@ qemuDomainSetPrivatePaths(virQEMUDriverPtr driver, goto cleanup; if (!priv->libDir && - virAsprintf(&priv->libDir, "%s/domain-%s", cfg->libDir, domname) < 0) + virAsprintf(&priv->libDir, "%s/domain-%s", cfg->stateDir, domname) < 0) goto cleanup; if (!priv->channelTargetDir && diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 03b1bcb..b596bd2 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -620,6 +620,10 @@ mymain(void) if (VIR_STRDUP_QUIET(driver.config->memoryBackingDir, "/var/lib/libvirt/qemu/ram") < 0) return EXIT_FAILURE; + VIR_FREE(driver.config->stateDir); + if (VIR_STRDUP(driver.config->stateDir, "/tmp/lib") < 0) + return EXIT_FAILURE; + # define DO_TEST_FULL(name, migrateFrom, migrateFd, flags, \ parseFlags, gic, ...) \ do { \ -- 2.8.3

3 2

[libvirt] [PATCH 0/4] libvirtd: fix hang on termination in qemu driver
by Nikolay Shirokovskiy 14 Dec '17

14 Dec '17

Libvirtd termination can hang. For example if some API call in qemu driver awaiting monitor response it will never finish because event loop does not functional during termination. As a result we hang in virNetDaemonClose call during termination as this call finishes RPC threads. Let's ask hypervisor drivers to finish all API calls by calling introduced state driver shutdown function before call to virNetDaemonClose. Nikolay Shirokovskiy (4): libvirt: introduce hypervisor driver shutdown function qemu: implement state driver shutdown function qemu: agent: fix monitor close during first sync qemu: monitor: check monitor not closed upon send daemon/libvirtd.c | 2 ++ src/driver-state.h | 4 ++++ src/libvirt.c | 18 ++++++++++++++++++ src/libvirt_internal.h | 1 + src/libvirt_private.syms | 1 + src/qemu/qemu_agent.c | 14 +++++++------- src/qemu/qemu_driver.c | 39 +++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor.c | 27 +++++++++++++-------------- 8 files changed, 85 insertions(+), 21 deletions(-) -- 1.8.3.1

2 6

[libvirt] [PATCH] audit: Log only an info message if audit_level < 2 and audit is not supported
by Marc Hartmayer 13 Dec '17

13 Dec '17

Replace the error message during startup of libvirtd with an info message if audit_level < 2 and audit is not supported by the kernel. Audit is not supported by the current kernel if the kernel does not have audit compiled in or if audit is disabled (e.g. by the kernel cmdline). Signed-off-by: Marc Hartmayer <mhartmay(a)linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy(a)linux.vnet.ibm.com> --- daemon/libvirtd.c | 2 +- src/util/viraudit.c | 17 +++++++++++++++-- src/util/viraudit.h | 2 +- 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/daemon/libvirtd.c b/daemon/libvirtd.c index 589b32192e3d..6bbff0d45684 100644 --- a/daemon/libvirtd.c +++ b/daemon/libvirtd.c @@ -1418,7 +1418,7 @@ int main(int argc, char **argv) { if (config->audit_level) { VIR_DEBUG("Attempting to configure auditing subsystem"); - if (virAuditOpen() < 0) { + if (virAuditOpen(config->audit_level) < 0) { if (config->audit_level > 1) { ret = VIR_DAEMON_ERR_AUDIT; goto cleanup; diff --git a/src/util/viraudit.c b/src/util/viraudit.c index 17e58b3a9574..9b755e384f24 100644 --- a/src/util/viraudit.c +++ b/src/util/viraudit.c @@ -55,11 +55,24 @@ static int auditfd = -1; #endif static bool auditlog; -int virAuditOpen(void) +int virAuditOpen(unsigned int audit_level) { #if WITH_AUDIT if ((auditfd = audit_open()) < 0) { - virReportSystemError(errno, "%s", _("Unable to initialize audit layer")); + /* You get these error codes only when the kernel does not + * have audit compiled in or it's disabled (e.g. by the kernel + * cmdline) */ + if (errno == EINVAL || errno == EPROTONOSUPPORT || + errno == EAFNOSUPPORT) { + const char msg[] = "Audit is not supported by the kernel"; + if (audit_level < 2) + VIR_INFO("%s", _(msg)); + else + virReportError(VIR_FROM_THIS, "%s", _(msg)); + } else { + virReportSystemError(errno, "%s", _("Unable to initialize audit layer")); + } + return -1; } diff --git a/src/util/viraudit.h b/src/util/viraudit.h index edaddf3c886f..e0471be1a85d 100644 --- a/src/util/viraudit.h +++ b/src/util/viraudit.h @@ -32,7 +32,7 @@ typedef enum { VIR_AUDIT_RECORD_RESOURCE, } virAuditRecordType; -int virAuditOpen(void); +int virAuditOpen(unsigned int audit_level); void virAuditLog(bool enabled); -- 2.13.4

2 5

[libvirt] [PATCH] nwfilter: fix deadlock on firewalld restart/reload
by Nikolay Shirokovskiy 07 Dec '17

07 Dec '17

Deadlock scenario: 1. domain is being started and domain driver takes read lock for nwfilter update lock thru virNWFilterReadLockFilterUpdates. 2. firewalld restarted and event loop hangs trying to take write lock for nwfilter update lock in nwfilterStateReload. This is deadlock because for thread 1 to proceed we need a response from qemu/timeout but whole event loop is stuck by 2. Let's just offload nwfilter driver reload to a distinct thread. Besides resolving a deadlock this change offloads rather heavy operation (many hypervisor drivers X many domains for a driver) off the event loop. --- Concrete stacktrace. Thread 17 (Thread 0x7fbd5a22d880 (LWP 7329)): 0 0x00007fbd56bb903e in pthread_rwlock_wrlock () from /lib64/libpthread.so.0 1 0x00007fbd3d511297 in nwfilterStateReload () from /usr/lib64/libvirt/connection-driver/libvirt_driver_nwfilter.so 2 0x00007fbd3d511355 in nwfilterFirewalldDBusFilter () from /usr/lib64/libvirt/connection-driver/libvirt_driver_nwfilter.so 3 0x00007fbd57bc5dfe in dbus_connection_dispatch () from /lib64/libdbus-1.so.3 4 0x00007fbd5953e641 in virDBusWatchCallback () from /lib64/libvirt.so.0 5 0x00007fbd5954868e in virEventPollRunOnce () from /lib64/libvirt.so.0 6 0x00007fbd59547942 in virEventRunDefaultImpl () from /lib64/libvirt.so.0 7 0x00007fbd596a94ed in virNetDaemonRun () from /lib64/libvirt.so.0 8 0x00007fbd5a28b07c in main () Thread 3 (Thread 0x7fbd49553700 (LWP 8029)): 0 0x00007fbd56bb96d5 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 1 0x00007fbd59596816 in virCondWait () from /lib64/libvirt.so.0 2 0x00007fbd3d0183db in qemuMonitorSend () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 3 0x00007fbd3d02c8d0 in qemuMonitorJSONCommandWithFd () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 4 0x00007fbd3d02e1a1 in qemuMonitorJSONSetCapabilities () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 5 0x00007fbd3cff965c in qemuConnectMonitor () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 6 0x00007fbd3cffcb70 in qemuProcessWaitForMonitor () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 7 0x00007fbd3d004668 in qemuProcessLaunch () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 8 0x00007fbd3d0062a8 in qemuProcessStart () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 9 0x00007fbd3d0679cb in qemuDomainObjStart.constprop.50 () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 10 0x00007fbd3d068106 in qemuDomainCreateWithFlags () from /usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so 11 0x00007fbd5964247d in virDomainCreateWithFlags () from /lib64/libvirt.so.0 12 0x00007fbd5a2a3b81 in remoteDispatchDomainCreateWithFlagsHelper () 13 0x00007fbd596af3c3 in virNetServerProgramDispatch () from /lib64/libvirt.so.0 14 0x00007fbd5a2c56cd in virNetServerHandleJob () 15 0x00007fbd59597221 in virThreadPoolWorker () from /lib64/libvirt.so.0 16 0x00007fbd595965a8 in virThreadHelper () from /lib64/libvirt.so.0 17 0x00007fbd56bb5dc5 in start_thread () from /lib64/libpthread.so.0 18 0x00007fbd568e473d in clone () from /lib64/libc.so.6 src/nwfilter/nwfilter_driver.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/src/nwfilter/nwfilter_driver.c b/src/nwfilter/nwfilter_driver.c index 2f9a51c..bcb4400 100644 --- a/src/nwfilter/nwfilter_driver.c +++ b/src/nwfilter/nwfilter_driver.c @@ -81,6 +81,12 @@ static void nwfilterDriverUnlock(void) #if HAVE_FIREWALLD +static void +nwfilterStateReloadAdapter(void *opaque ATTRIBUTE_UNUSED) +{ + nwfilterStateReload(); +} + static DBusHandlerResult nwfilterFirewalldDBusFilter(DBusConnection *connection ATTRIBUTE_UNUSED, DBusMessage *message, @@ -90,8 +96,12 @@ nwfilterFirewalldDBusFilter(DBusConnection *connection ATTRIBUTE_UNUSED, "NameOwnerChanged") || dbus_message_is_signal(message, "org.fedoraproject.FirewallD1", "Reloaded")) { + virThread thread; + VIR_DEBUG("Reload in nwfilter_driver because of firewalld."); - nwfilterStateReload(); + if (virThreadCreate(&thread, false, nwfilterStateReloadAdapter, NULL) < 0) + VIR_ERROR(_("Could not create thread. Network filter " + "driver reload failed")); } return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; -- 1.8.3.1

2 2

[libvirt] [jenkins-ci PATCH] guests: install additional debugging tools
by Pavel Hrdina 06 Dec '17

06 Dec '17

Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- guests/vars/mappings.yml | 14 ++++++++++++++ guests/vars/projects/base.yml | 4 ++++ 2 files changed, 18 insertions(+) diff --git a/guests/vars/mappings.yml b/guests/vars/mappings.yml index eca8dbe..ff97231 100644 --- a/guests/vars/mappings.yml +++ b/guests/vars/mappings.yml @@ -100,6 +100,9 @@ mappings: default: gcc FreeBSD: + gdb: + default: gdb + gettext: default: gettext @@ -306,6 +309,9 @@ mappings: pkg: libxslt rpm: libxslt-devel + lsof: + default: lsof + lvm2: default: lvm2 FreeBSD: @@ -390,6 +396,10 @@ mappings: deb: libnetcf-dev rpm: netcf-devel + netstat: + default: net-tools + FreeBSD: + numad: default: numad FreeBSD: @@ -631,6 +641,10 @@ mappings: rpm: spice-gtk3-devel CentOS6: + strace: + default: strace + FreeBSD: + unzip: default: unzip FreeBSD: diff --git a/guests/vars/projects/base.yml b/guests/vars/projects/base.yml index d82f6b9..352e85a 100644 --- a/guests/vars/projects/base.yml +++ b/guests/vars/projects/base.yml @@ -6,12 +6,16 @@ packages: - ccache - cppi - gcc + - gdb - gettext - glibc - libtool - libtoolize + - lsof - make + - netstat - patch - perl - pkg-config - rpmbuild + - strace -- 2.13.6

2 1

[libvirt] [PATCH] apparmor: allow qemu abstraction to read /proc/pid/cmdline
by Jim Fehlig 04 Dec '17

04 Dec '17

Noticed the following denial in audit.log when shutting down an apparmor confined domain type=AVC msg=audit(1512002299.742:131): apparmor="DENIED" operation="open" profile="libvirt-66154842-e926-4f92-92f0-1c1bf61dd1ff" name="/proc/1475/cmdline" pid=2958 comm="qemu-system-x86" requested_mask="r" denied_mask="r" fsuid=469 ouid=0 Squelch the denial by allowing read access to /proc/<pid>/cmdline. Signed-off-by: Jim Fehlig <jfehlig(a)suse.com> --- Note: In the audit.log snippet, PID 1475 is libvirtd and 2958 is the qemu process. I must admit it is not clear to me why /proc/<libvirtd-pid>/cmdline is read on domain shutdown. examples/apparmor/libvirt-qemu | 1 + 1 file changed, 1 insertion(+) diff --git a/examples/apparmor/libvirt-qemu b/examples/apparmor/libvirt-qemu index 73bdbae87..3d9eed9ec 100644 --- a/examples/apparmor/libvirt-qemu +++ b/examples/apparmor/libvirt-qemu @@ -25,6 +25,7 @@ /dev/ptmx rw, /dev/kqemu rw, @{PROC}/*/status r, + @{PROC}/@{pid}/cmdline r, # Per man(5) proc, the kernel enforces that a thread may # only modify its comm value or those in its thread group. owner @{PROC}/@{pid}/task/@{tid}/comm rw, -- 2.15.0

4 7