HI, I have a small problem with libvirt / qemu. I have created a guest and when I start it from the command-line the guests starts OK, but when I start the guest through libvirt with "virsh start" I get "Booting from Hard Disk... Boot failed: not a bootable disk No bootable device" This is the command-line I use to start the guest (which works) "cd /var/lib/kvm/Wilmer; /usr/bin/qemu-system-x86_64 --enable-kvm \ -net nic,vlan=1,model=rtl8139,macaddr=DE:ED:BE:EF:01:03 -net tap,vlan=1,ifname=qtap13,script=no,downscript=no \ -net nic,vlan=3,model=rtl8139,macaddr=DE:ED:BE:EF:03:03 -net tap,vlan=3,ifname=qtap33,script=no,downscript=no \ -m 2048 -k de-ch -vnc :3 -daemonize \ Wilmer.qcow2" The libvirt XML-file was created using "virsh domxml-from-native qemu-argv" and this is the result of that conversion: <domain type='kvm'> <name>wilmer</name> <uuid>a421968d-0573-1356-8cb7-32caff525a03</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <source file='/var/lib/kvm/Wilmer/Wilmer.qcow2'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='ethernet'> <mac address='de:ed:be:ef:01:03'/> <script path='no'/> <target dev='qtap13'/> <model type='rtl8139'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </interface> <interface type='ethernet'> <mac address='de:ed:be:ef:03:03'/> <script path='no'/> <target dev='qtap33'/> <model type='rtl8139'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </interface> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5903' autoport='no' listen=''/> <video> <model type='cirrus' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> </devices> </domain> Anyone seeing something obvious that I have missed? Regards, -- Dan Johansson, <http://www.dmj.nu> *************************************************** This message is printed on 100% recycled electrons! ***************************************************