7:01 p.m.
I ran into an odd problem today. I wanted to share it here in the
hopes of maybe saving someone else some lost time.
When you run libvirtd as an unprivileged user (e.g., if you target
qemu:///session from a non-root account), then libvirt will open a
unix domain socket in one of two places:
- If XDG_RUNTIME_DIR is defined, then inside
$XDG_RUNTIME_DIR/libvirt/libvirt-sock
- If XDG_RUNTIME_DIR is *not* defined, then inside
$HOME/.cache/libvirt/libvirt-sock
With a CentOS 7 system, at least, if you ssh directly into an
account, XDG_RUNTIME_DIR is set. But! If you `su -` to the account
from root, e.g:
# su - stack
Then XDG_RUNTIME_DIR is *not* set. The problem is a little subtle,
because most operations you will perform will work just fine in both
cases: you can query for defined but not active guests, storagep
pools, volumes, and so forth without a problem and you'll get the same
answer.
The problem crops up when you start a guest, which results in a
persistent libvirtd process. Now, depending on how you got to your
account, you will either (a) talk to the persistent process, and
you'll be able to see the running guests, or (b) you'll end up
spawning a new ephemeral libvirtd process listening in the *other*
location, and you won't see anything, and you will wonder why there is
a qemu process running for your guest but it's not showing up in
"virsh list" and what the heck is going on here.
I don't know if there's a good solution to this, but the failure mode
is really non-obvious.
Cheers,
--
Lars Kellogg-Stedman <lars(a)redhat.com> | larsks @ {freenode,twitter,github}
Cloud Engineering / OpenStack | http://blog.oddbit.com/
12:43 p.m.
On Wed, Mar 09, 2016 at 01:01:40PM -0500, Lars Kellogg-Stedman wrote:
I ran into an odd problem today. I wanted to share it here in the
hopes of maybe saving someone else some lost time.
When you run libvirtd as an unprivileged user (e.g., if you target
qemu:///session from a non-root account), then libvirt will open a
unix domain socket in one of two places:
- If XDG_RUNTIME_DIR is defined, then inside
$XDG_RUNTIME_DIR/libvirt/libvirt-sock
- If XDG_RUNTIME_DIR is *not* defined, then inside
$HOME/.cache/libvirt/libvirt-sock
With a CentOS 7 system, at least, if you ssh directly into an
account, XDG_RUNTIME_DIR is set. But! If you `su -` to the account
from root, e.g:
# su - stack
Then XDG_RUNTIME_DIR is *not* set.
I see, didn't realize this. Refere below a quick test, based on what
you mentioned
The problem is a little subtle, because most operations you will
perform will work just fine in both cases: you can query for defined
but not active guests, storagep pools, volumes, and so forth without a
problem and you'll get the same answer.
Let's put this to test.
I'm on a root shell:
$ whoami
root
`su -` into a user:
$ su - kashyapc
$ echo $XDG_RUNTIME_DIR
Try to enumerate instances, fails on the first attempt:
$ virsh list
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to
'/home/kashyapc/.cache/libvirt/libvirt-sock': No such file or directory
The above step seems to have prompted libvirt to create the socketL
$ file ~/.cache/libvirt/libvirt-sock
/home/kashyapc/.cache/libvirt/libvirt-sock: socket
So, the second attempt to enumerate instances work just fine, since the
socket is created.
* * *
The problem crops up when you start a guest, which results in a
persistent libvirtd process. Now, depending on how you got to your
account, you will either (a) talk to the persistent process, and
you'll be able to see the running guests, or (b) you'll end up
spawning a new ephemeral libvirtd process listening in the *other*
location, and you won't see anything, and you will wonder why there is
a qemu process running for your guest but it's not showing up in
"virsh list" and what the heck is going on here.
Test-2
------
If I don't `su -` to get to my account at first, but spawn a new shell
(Ctl + Shift + t), the XDG_RUNTIME_DIR variable is set:
$ echo $XDG_RUNTIME_DIR
/run/user/1000
$ virsh list --all
Id Name State
----------------------------------------------------
- vm1 shut off
$ virsh start vm1
Domain vm1 started
And the socket is created under /run/user/1000/libvirt:
$ ls /run/user/1000/libvirt/
hostdevmgr libvirtd.pid libvirt-sock network qemu storage
$ ls ~/.cache/libvirt/
hostdevmgr libvirt network qemu storage virsh
Then, continuing with the above same shell, do:
$ sudo -i
$ su - kashyapc
Now, again try to enumerate the instance we started a few steps above,
as it was looking for the socket in the other location).
$ virsh list
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to
'/home/kashyapc/.cache/libvirt/libvirt-sock': No such file or directory
But, the socket is created, anyway, and try to enumerate the instance:
$ virsh list
$ virsh list --all
Id Name State
----------------------------------------------------
- vm1 shut off
As you've observed, while the QEMU process for the above VM is still
intact, from libvirt's perspective, the instance is (a) not enumerated
with `virsh list`; (b) and when the '--all' flag is supplied to `virsh
list`, the VM is listed as "shut off", which can cause more confusion.
(Finally: on the above session, if I logout of the `su -`'ed user
session & the root session, then I'm back to the 'pristine shell state'
where lIbvirt behaves 'properly'.)
I don't know if there's a good solution to this, but the
failure mode
is really non-obvious.
This seems worth filing a bug for.
--
/kashyap
1:37 p.m.
On Wed, Mar 09, 2016 at 01:01:40PM -0500, Lars Kellogg-Stedman wrote:
I ran into an odd problem today. I wanted to share it here in the
hopes of maybe saving someone else some lost time.
When you run libvirtd as an unprivileged user (e.g., if you target
qemu:///session from a non-root account), then libvirt will open a
unix domain socket in one of two places:
- If XDG_RUNTIME_DIR is defined, then inside
$XDG_RUNTIME_DIR/libvirt/libvirt-sock
- If XDG_RUNTIME_DIR is *not* defined, then inside
$HOME/.cache/libvirt/libvirt-sock
With a CentOS 7 system, at least, if you ssh directly into an
account, XDG_RUNTIME_DIR is set. But! If you `su -` to the account
from root, e.g:
# su - stack
Then XDG_RUNTIME_DIR is *not* set. The problem is a little subtle,
because most operations you will perform will work just fine in both
cases: you can query for defined but not active guests, storagep
pools, volumes, and so forth without a problem and you'll get the same
answer.
IMHO this is a bug in the pam config. We really expect to see the
same environment setup no matter how you login text console vs su
vs ssh vs GDM. If that's not happening, its always going to cause
bad behaviour across many apps, not only libvirt.
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
2:35 p.m.
On Thu, Mar 10, 2016 at 12:37:31PM +0000, Daniel P. Berrange wrote:
On Wed, Mar 09, 2016 at 01:01:40PM -0500, Lars Kellogg-Stedman
wrote:
> I ran into an odd problem today. I wanted to share it here in the
> hopes of maybe saving someone else some lost time.
>
> When you run libvirtd as an unprivileged user (e.g., if you target
> qemu:///session from a non-root account), then libvirt will open a
> unix domain socket in one of two places:
>
> - If XDG_RUNTIME_DIR is defined, then inside
> $XDG_RUNTIME_DIR/libvirt/libvirt-sock
>
> - If XDG_RUNTIME_DIR is *not* defined, then inside
> $HOME/.cache/libvirt/libvirt-sock
>
> With a CentOS 7 system, at least, if you ssh directly into an
> account, XDG_RUNTIME_DIR is set. But! If you `su -` to the account
> from root, e.g:
>
> # su - stack
>
> Then XDG_RUNTIME_DIR is *not* set. The problem is a little subtle,
> because most operations you will perform will work just fine in both
> cases: you can query for defined but not active guests, storagep
> pools, volumes, and so forth without a problem and you'll get the same
> answer.
IMHO this is a bug in the pam config. We really expect to see the
same environment setup no matter how you login text console vs su
vs ssh vs GDM. If that's not happening, its always going to cause
bad behaviour across many apps, not only libvirt.
Talking to Alexander Bokovoy (of FreeIPA, CCed) on IRC on this topic, he
says:
'su -' does initialize environment to start a shell
as a login shell. It clears out everything but TERM from the old
environment
and sets a new one. If your shell for $user does
not set XDG_RUNTIME_DIR, then that's the issue, not PAM
XDG_RUNTIME_DIR is set by pam_systemd after logind created a session
for that user, but only in the case if user who authenticated is the
same as the original user of the session
when you do 'su - $user' as root, you'd get this [error message is
manually wrapped for this email]:
su[9188]: pam_systemd(su-l:session): pam-systemd initializing
su[9188]: pam_systemd(su-l:session): Asking logind to create
session: uid=1792600000 pid=9188 service=su-l type=tty
class=user desktop= seat= vtnr=0 tty=pts/1 display= remote=no
remote_user=root remote_host=
su[9188]: pam_systemd(su-l:session): Cannot create session:
Already running in a session
[NOTE: you need to add 'debug' option to pam_systemd.so,
/etc/pam.d/system-auth]
`su -` isn't a best tool, specifically under systemd -- it may be
more efficient to use systemd tools to create sessions and
activate/switch them
--
/kashyap
3:05 a.m.
Lars Kellogg-Stedman <lars(a)redhat.com>
writes:
I ran into an odd problem today. I wanted to share it here in the
hopes of maybe saving someone else some lost time.
When you run libvirtd as an unprivileged user (e.g., if you target
qemu:///session from a non-root account), then libvirt will open a
unix domain socket in one of two places:
- If XDG_RUNTIME_DIR is defined, then inside
$XDG_RUNTIME_DIR/libvirt/libvirt-sock
- If XDG_RUNTIME_DIR is *not* defined, then inside
$HOME/.cache/libvirt/libvirt-sock
With a CentOS 7 system, at least, if you ssh directly into an
account, XDG_RUNTIME_DIR is set. But! If you `su -` to the account
from root, e.g:
# su - stack
Then XDG_RUNTIME_DIR is *not* set. The problem is a little subtle,
because most operations you will perform will work just fine in both
cases: you can query for defined but not active guests, storagep
pools, volumes, and so forth without a problem and you'll get the same
answer.
The problem crops up when you start a guest, which results in a
persistent libvirtd process. Now, depending on how you got to your
account, you will either (a) talk to the persistent process, and
you'll be able to see the running guests, or (b) you'll end up
spawning a new ephemeral libvirtd process listening in the *other*
location, and you won't see anything, and you will wonder why there is
a qemu process running for your guest but it's not showing up in
"virsh list" and what the heck is going on here.
I don't know if there's a good solution to this, but the failure mode
is really non-obvious.
Cheers,
I've run into the same problem, while trying to inspect the VM that
users have made using qemu:///session on a shared shell server.
I reached the conclusion that the ultimate problem was, as is suggested
elsewhere in this thread, with PAM, and how su does not register a new
session with PAM/logind/systemd. As far as I know, there is no widely
used way for an administrator to get a shell as some user, registered
with PAM, without first authenticating specifically as that user.
(There is machinectl shell, but that is pretty new, and also rather
inflexible.)
I solved this problem by writing a small Kerberos plugin to allow
administrator principals in our domain to authenticate as any Unix user;
then to use qemu:///session, they can simply ssh in. This also allows
administrators to use qemu+ssh://someuser@host/session on remote hosts.
3080
days inactive
3111
days old
4 comments
4 participants
participants (4)
-
Daniel P. Berrange -
Kashyap Chamarthy -
Lars Kellogg-Stedman -
sbaugh＠catern.com