Re: DOS
On Wed, 02 Nov 2022 09:15:19 +0100, Peter Krempa wrote:
Please post the full XML definition of the network you use for the
VMs.
Well, I did not write any XML, but here it is.
|<network>
| <name>isolated</name>
| <uuid>17dca0c1-8bc6-4c6b-89b6-71259492315b</uuid>
| <bridge name='virbr1' stp='on' delay='0'/>
| <mac address='52:54:00:a0:26:52'/>
| <domain name='isolated'/>
| <ip address='192.168.100.1' netmask='255.255.255.0'>
| <dhcp>
| <range start='192.168.100.128' end='192.168.100.254'/>
| </dhcp>
| </ip>
|</network>
Libvirt's network definition creates a bridge (switch), so it
shouldn't
really matter which protocol you run across it. Obviously libvirt
does not configure IPX on the host facing side of the bridge because we
don't support it, but if VMs talk IPX they should be able to.
Is there some way to confirm that one guest VM sees the traffic from
another?
With IPX I get no errors in DOS but they do not see each other.
/Tomas