Re: [libvirt-users] Centos 7.1.1503 + libvirt 1.2.14 = broken direct network mode
Hi all
Why are you using macvtap ("type='direct') to connect to
a bridge
device? You should either use macvtap to connect directly to a physical
ethernet (e.g. eth0) *or* you should use a standard tap device
("type='bridge'") to connect to the bridge. Although it might work to
connect to a bridge using macvtap, I can't think of any reason you would
want to do it that way (and that may be the source of the error you're
seeing - since macvtap isn't intended to be used that way, that scenario
probably doesn't get much, if any, testing).
Yes, You are right.
I already think about it and can't remember why started using bridge
over iface and macvlan over bridge, may be because used common vlan:
enp2s0->enp2s0.2->br2->lxc
enp2s0->enp2s0.502->br502->lxc
Probably I need test new schema - it's would be fatser and work with
new kernel:
enp2s0->enp2s0.502->lxc:
<interface type='direct'>
<mac address='02:00:00:25:a7:56'/>
<source dev='enp2s0.2' mode='bridge'/>
</interface>
thanks for the advice !
b.r.
Maxim Kozin