January 2022 - Users - libvirt List Archives

error during host deploy
by Dana Elfassy 11 Jan '22

11 Jan '22

Hi, While running a test case of adding hosts on ovirt system tests there was a failure while the following command was executed: vdsm-tool configure --force On libvirtd log I found this error: 2021-12-17 00:11:41.753+0000: 28031: error : virNetTLSContextNew:732 : Unable to generate diffie-hellman parameters: Error in public key generation. How would you suggest to debug this failure? attaching libvirtd & journalctl logs libvirt version: 7.10.0, package: 1.module_el8.6.0+1046+bd8eec5e Thanks, Dana The error from host deploy log: "2021-12-17 01":"11":"45 CET - fatal":[ ost-basic-suite-master-host-0 ]:"FAILED! =>"{ "changed":true, "cmd":[ "vdsm-tool", "configure", "--force" ], "delta":"0:00:06.908971", "end":"2021-12-17 01:11:42.815057", "msg":"non-zero return code", "rc":1, "start":"2021-12-17 01:11:35.906086", "stderr":"Error: ServiceOperationError: _systemctlStart failed\nb'Job for libvirtd.service failed because a fatal signal was delivered causing the control process to dump core.\\nSee \"systemctl status libvirtd.service\" and \"journalctl -xe\" for details.\\n' ", "stderr_lines":[ "Error: ServiceOperationError: _systemctlStart failed", "b'Job for libvirtd.service failed because a fatal signal was delivered causing the control process to dump core.\\nSee \"systemctl status libvirtd.service\" and \"journalctl -xe\" for details.\\n' " ], "stdout":"\nChecking configuration status...\n\nlvm is configured for vdsm\nCurrent revision of multipath.conf detected, preserving\nlibvirt is already configured for vdsm\nSUCCESS: ssl configured to true. No conflicts\nsanlock is configured for vdsm\nManaged volume database is already configured\n\nRunning configure...\nReconfiguration of libvirt is done.\nReconfiguration of passwd is done.", "stdout_lines":[ "", "Checking configuration status...", "", "lvm is configured for vdsm", "Current revision of multipath.conf detected, preserving", "libvirt is already configured for vdsm", "SUCCESS: ssl configured to true. No conflicts", "sanlock is configured for vdsm", "Managed volume database is already configured", "", "Running configure...", "Reconfiguration of libvirt is done.", "Reconfiguration of passwd is done." ] }

2 8

回复： Failed in using LD_PRELOAD to hook mmap system call in qemu(through libvirt)
by Xiong。 06 Jan '22

06 Jan '22

On Thu, Jan 06, 2022 at 07:44:25PM +0800, Xiong。 wrote: > Dear sir: >     I want to hook mmap system call in qemu, and I use > libvirt to passthrough the environment argument like this: >  <qemu:commandline> >    <qemu:env name='LD_PRELOAD' value='/glibcHookMMAP.so'/> >  </qemu:commandline> > But it failed. I can hardly find out what is the matter! > The log in libvirt like this:ERROR: ld.so: object > '/glibcHookMMAP.so' from LD_PRELOAD cannot be preloaded > (cannot open shared object file): ignored.    Firstly, > I think it's the problem of authority. But the file > glibcHookMMAP.so has been done with command `chmod 777`. > My environment is as follows: Ubuntu 18.04.2 Linux > 5.4.0-92 libvirt 4.0.0 qemu 2.11.1 On Thu, Jan 06, 2022 at 09:47:25PM +0800, Daniel P. Berrangé。 wrote: > Aside from normal file permissions, the other likely problem on Ubuntu > will be AppArmor policy. It likely won't allow QEMU to load files from > the / directory - if you put your .so in /usr/local/lib it might > work. On Thu, Jan 07, 2022 at 09:27:25AM +0800, Xiong。 wrote: > I have a try, but it does not work and makes the same warning: > ld.so: object '/usr/local/lib/glibcHookMMAP.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored. > However, I use qemu command directly and it works. Command is like this: > sudo LD_PRELOAD=/usr/local/lib/glibcHookMMAP.so qemu-system-x86_64 -enable-kvm ...(other args). > After that, I get print information with my hook program. And I think the problem is in passing the environment args in libvirt. Sorry, I find out what's the matter. The AppArmor policy limits the libvirt, and modifing configuration works. Thank you for your advise!

1 0

Failed in using LD_PRELOAD to hook mmap system call in qemu(through libvirt)
by Xiong。 06 Jan '22

06 Jan '22

Dear sir:      I want to hook mmap system call in qemu, and I use libvirt to passthrough the environment argument like this:<qemu:commandline> <qemu:env name='LD_PRELOAD' value='/glibcHookMMAP.so'/> </qemu:commandline>    But it failed. I can hardly find out what is the matter! The log in libvirt like this:ERROR: ld.so: object '/glibcHookMMAP.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.    Firstly, I think it's the problem of authority. But the file glibcHookMMAP.so has been done with command `chmod 777`.    My environment is as follows: Ubuntu 18.04.2 Linux 5.4.0-92 libvirt 4.0.0 qemu 2.11.1     Look forward to your feedbacks.     Sincerely yours

2 2

config vhost-user-scsi
by Jiatong Shen 06 Jan '22

06 Jan '22

Hello, I am trying spdk vhost-user. I managed to plug in vhost-user-blk, but did not find the doc guiding me through setting up vhost-user-scsi. Is it supported now? Thank you. -- Best Regards, Jiatong Shen

1 0

Allow unsafe migration - ?
by lejeczek 05 Jan '22

05 Jan '22

Hi guys. Is it possible to allow 'unsafe' migration globally? many thanks, L.

3 4

simulating multiple hypervisors with the test driver
by Tom Ammon 04 Jan '22

04 Jan '22

Hello, I'm working on a python application that will manage multiple remote libvirt hypervisors. I've been using the test:///default uri for single-hypervisor tests, and it works great. I'd like to simulate connecting to two different remote hypervisors, however, in my testing so far it appears that multiple connections to the test:///default uri just look like different connections to the same hypervisor. Here's what I tried : conn_one = libvirt.open('test:///default') <build and start some domains> one_vms = conn_one.listAllDomains(0) for x in one_vms: print(f"The vm in set one is {x.name()}") <get list of all the domains I just built> conn_two = libvirt.open('test:///default') <build and start some different domains> two_vms = conn_two.listAllDomains(0) for z in two_vms: print(f"The vm in set one is {z.name()}") <get list of ALL domains including those created with conn_one, not just those created using the conn_two instance> What I would like is to be able to spin up two completely independent instances of the test driver so that it can simulate two different hypervisors/instances of libvirtd. Is that possible? Thanks, Tom -- ----------------------------------------------------------------------------- Tom Ammon M: (737) 400-9042 thomasammon(a)gmail.com -----------------------------------------------------------------------------

2 2

Best way to install guest when it is not listed in output of osinfo-query os
by john doe 04 Jan '22

04 Jan '22

Hello all, I would like to install Debian Bullseye using virt-install, as part of the command I usually specify the OS used with the option '--os-variant'. This works great untill Buster ('debian10'), but now the guest is Bullseye ('debian11') and is not listed in the output of 'osinfo-query os' (1). If I don't use the '--os-variant' flag I get the following warning: "WARNING No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results." Should I ignore the warning or what is the best way forward to install a Debian Bullseye guest? Both the host and the guest are Debian 11. 1) https://lists.debian.org/debian-user/2021/12/msg00742.html -- John Doe

5 6