[libvirt-users] issue on fedora21 with libvirt-1.2.13 and 1.2.14 - containers won't start at all
by Thierry Parmentelat
Hi there
I am using fedora21 for hosts and guests, using lxc containers, and was on vanilla 1.2.9 as exposed by the fedora yum repo
The other day I was needing the ability to grant mknod capability to some guests, some chap on IRC kindly pointed me at the <capabilities> tag
However I was told that needed 1.2.11
So I went and rebuilt from this download
http://libvirt.org/sources/libvirt-1.2.14-1.fc21.src.rpm
using plain rmbuild —rebuild
Once I had upgraded my host with these new rpms it looked like everything was going fine, and my guests indeed were able to mknod
However once I rebooted the host, virsh unpleasantly refused to start any of my containers, and complained like this after hanging for 5 to 10 seconds:
2015-04-11 07:44:10.295+0000: 37843: error : virLXCProcessStart:1263 : internal error: guest failed to start: libvirt: error : Failed to terminate process 37905 with SIGKILL: Device or resource busy
—
At that point I redid the same with 1.2.13, which gave me the same behaviour, and then 1.2.12 which seems to work for me right now
—
So it looks like 1.2.13 brings me a regression of some kind
I am attaching the XML config for one sample domain, mostly they all look alike
Should I file a bug report, and if so where should I do that ?
thanks
—
root@buzzcocks ~ # virsh -c lxc:/// dumpxml testmaster
setlocale: No such file or directory
<domain type='lxc' id='1528'>
<name>testmaster</name>
<uuid>18989592-f964-4d51-90af-7ecf7719b758</uuid>
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<vcpu placement='auto'>1</vcpu>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64'>exe</type>
<init>/sbin/init</init>
</os>
<features>
<acpi/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/libexec/libvirt_lxc</emulator>
<filesystem type='mount' accessmode='passthrough'>
<source dir='/vservers/testmaster'/>
<target dir='/'/>
</filesystem>
<interface type='bridge'>
<mac address='52:54:00:ae:8b:47'/>
<source bridge='br0'/>
<target dev='viftestmaster'/>
<guest dev='eth0'/>
</interface>
<console type='pty' tty='/dev/pts/0'>
<source path='/dev/pts/0'/>
<target type='lxc' port='0'/>
<alias name='console0'/>
</console>
</devices>
</domain>
10 years
[libvirt-users] Detecting that the VM is snapshoting
by Joaquín Rinaudo
While taking or reverting a snapshot, using virsh --connect qemu:///system
dominfo, the state of a VM is paused. Is there a way to distinguish this
state (snapshotting) with virsh or any other tools?
Joaquín
10 years
[libvirt-users] LXC and syslog seperation (/dev/log)
by James Leu
Hello,
I'm seeing syslog messages "bleed" from the host and other LXC into
the messages, maillog, secure logs of other LXCs.
I'm using libvirt 1.0.0 on a host with systemd and kernel 3.9.10.
Each LXC is running an older non-systemd linux distribution
Is this a known issue? Is there a work around?
Thank you for you time,
Jim
--
James R. Leu | Director of Technology | INOC | Madison, WI, USA
O: +1-608-204-0203 | F: +1-608-663-4558 | jleu(a)inoc.com | www.inoc.com
Service. Not Software.®
10 years
[libvirt-users] raw disks used by guest unavailable to host - retrieve them?
by lejeczek
hi everybody
my guests had drives passed though, like here:
<disk type='block' device='lun'>
<driver name='qemu' type='raw' cache='none'/>
<source dev='/dev/sdv'/>
<target dev='sda' bus='scsi'/>
<address type='drive' controller='0' bus='0' target='0'
unit='0'/>
guests were Windows 8/2012, now after de-defining guests
those disks are still unavailable to host's lvm, pvscan
doesn't see.
Is there a way to fix it?
bw.
P
10 years
[libvirt-users] How to get the real migrate speed (MB/s) in the libvirt.
by Edward Young
Hi all,
I start to migrate a VM with its storage using "virsh migrate --live
--copy-storage-all ..." command. I'm wondering whether we can get the
migration report when the migration is done. For instance, how long it
takes to migrate this VM, the total data transferred and etc..
Thanks!
Ed
10 years
[libvirt-users] Centos 7.1.1503 + libvirt 1.2.14 = broken direct network mode
by mxs kolo
Hi all.
I use LXC on Centos 7 x86-64, with libvirt version 1.2.6 and 1.2.12
My container has bridged network:
# virsh dumpxml test1
<domain type='lxc'>
<name>test1</name>
<uuid>518539ab-7491-45ab-bb1d-3d7f11bfb0b1</uuid>
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<memtune>
<hard_limit unit='KiB'>1048576</hard_limit>
<soft_limit unit='KiB'>1048576</soft_limit>
<swap_hard_limit unit='KiB'>2097152</swap_hard_limit>
</memtune>
<vcpu placement='static'>2</vcpu>
<os>
<type arch='x86_64'>exe</type>
<init>/sbin/init</init>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/libexec/libvirt_lxc</emulator>
<filesystem type='block' accessmode='passthrough'>
<source dev='/dev/data/test1'/>
<target dir='/'/>
</filesystem>
<filesystem type='ram' accessmode='passthrough'>
<source usage='524288' units='KiB'/>
<target dir='/dev/shm'/>
</filesystem>
<interface type='direct'>
<mac address='02:00:00:1a:a9:54'/>
<source dev='br0' mode='bridge'/>
</interface>
<console type='pty'>
<target type='lxc' port='0'/>
</console>
</devices>
</domain>
And all was fine, before I accidentally upgraded Centos to 7.1.1503
After upgrade LXC can't start with diagnostic:
[root@node14 ~]# virsh start test1
error: Failed to start domain test1
error: internal error: guest failed to start: internal error: Child
process (ip link set macvlan0 netns 25263) unexpected exit status 2:
RTNETLINK answers: Invalid argument
I reinstall libvirt 1.2.14, but catch same error.
If someone will experience in solving this problem - it will be
interesting to hear about.
b.r.
Maxim Kozin
10 years
[libvirt-users] XML vm configfile with Display using QEMU GTK interface
by Vinícius Ferrão
Hello guys,
I'm trying to start a VM using the QEMU GTK Display Interface instead of a SDL window. But I'm failing.
My actual setting is using SDL with this XML line:
<graphics type='sdl' display=':0.0' xauth='/home/ploog/.Xauthority'/>
I changed to:
<graphics type='gtk'>
But it fails to start the VM.
Any ideias?
Thanks in advance,
10 years
[libvirt-users] SIGTERM signal to qemu-kvm process
by Jatin Davey
Hi
I am using QEMU 0.12.1 as the hypervisor in my RHEL installation of 6.5.
I wanted to know if there are any side-effects with respect to VM image
corruption when i use SIGTERM signal to kill a qemu-kvm process which
effectively stops my VM running on the host.
Appreciate if you can provide me some valuable information in this regard.
Thanks
Jatin
10 years
[libvirt-users] [Libvirt] [virsh] Transport Error during enumeration while connecting libvirt to Hyper-V Server
by Dhaval_Shah1＠dell.com
Hi all,
I am using libvirt 1.1.1. I can successfully able to connect with Qemu driver but when I am trying to connect to the windows Hyper-V using virsh, I am getting failure.
[root@localhost hyperv]# virsh version
Compiled against library: libvirt 1.1.1
Using library: libvirt 1.1.1
Using API: QEMU 1.1.1
Running hypervisor: QEMU 1.5.3
When I am doing virsh to connect to hype-V I am getting failure that
[root@localhost hyperv]# virsh -c hyperv://172.16.67.192
Enter username for 11.16.67.92 [administrator]: administrator
Enter administrator's password for 11.16.67.92:
error: failed to connect to the hypervisor
error: internal error: Transport error during enumeration: Transport initialization failed (2)
using gdb I came to know that from the function "hypervEnumAndPull()" it is calling "wsmc_action_enumerate()"
and we are verifying the response using "hyperyVerifyResponse" and from there it fails and cleanup is being called.
Code :
response = wsmc_action_enumerate(priv->client, root, options, filter);
if (hyperyVerifyResponse(priv->client, response, "enumeration") < 0) {
goto cleanup;
}
I have correctly done the settings on my hyper-v Server using below commands:
winrm set winrm/config/service/auth @{Basic="true"}
winrm set winrm/config/service @{AllowUnencrypted="true"}
Does anyone knows what could be wrong or I am missing something or can anyone help to solve this issue.
Thanks & Regards,
Dhaval Shah
10 years
[libvirt-users] can't boot from http cdrom
by Vasiliy Tolstov
Hi. I'm try to boot from http cdrom and can't do that in case of scsi:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='unsafe'/>
<source protocol='http' name='/vps/rescue-4.5.2'>
<host name='xx.xx' port='80'/>
</source>
<backingStore/>
<target dev='sdb' bus='scsi'/>
<readonly/>
<alias name='scsi0-0-0-1'/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
but in case of ide:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='unsafe'/>
<source protocol='http' name='/vps/rescue-4.5.2'>
<host name='xx.xx' port='80'/>
</source>
<backingStore/>
<target dev='hda' bus='ide'/>
<readonly/>
<alias name='ide0-0-0'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
all works fine.
libvirt - 1.2.10
qemu - 2.0.0
seabios - 1.7.5
--
Vasiliy Tolstov,
e-mail: v.tolstov(a)selfip.ru
jabber: vase(a)selfip.ru
10 years
