December 2015 - Users - libvirt List Archives

[libvirt-users] ceph rbd pool and libvirt manageability (virt-install)
by Jelle de Jong 28 Aug '18

28 Aug '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I created a rbd pool and activated it, but I can't seem to create volumes in it with virsh or virt-install? # virsh pool-dumpxml myrbdpool <pool type='rbd'> <name>myrbdpool</name> <uuid>2d786f7a-2df3-4d79-ae60-1535bcf1c6b5</uuid> <capacity unit='bytes'>6997998301184</capacity> <allocation unit='bytes'>10309227031</allocation> <available unit='bytes'>6977204658176</available> <source> <host name='ceph01.powercraft.nl' port='6789'/> <host name='ceph02.powercraft.nl' port='6789'/> <host name='ceph03.powercraft.nl' port='6789'/> <name>libvirt-pool</name> <auth type='ceph' username='libvirt'> <secret uuid='029a334e-ed57-4293-bb99-ffafa8867122'/> </auth> </source> </pool> # virt-install --version 1.0.1 # virsh --version 1.2.9 I ended using virsh edit ceph-test.powercraft.nl and making creating the disk manually. <disk type='network' device='disk'> <auth username='libvirt'> <secret type='ceph' uuid='029a334e-ed57-4293-bb99-ffafa8867122'/> </auth> <source protocol='rbd' name='libvirt-pool/kvm01-storage'> <host name='ceph01.powercraft.nl' port='6789'/> <host name='ceph02.powercraft.nl' port='6789'/> <host name='ceph03.powercraft.nl' port='6789'/> </source> <target dev='vdc' bus='virtio'/> </disk> I use virt-install a lot to define, import and undefine domains, how can I use virt-install to manage my rdb disks? Kind regards, Jelle de Jong -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iJwEAQECAAYFAlV1xlQACgkQ1WclBW9j5HkbPQP+PjNrzvlqysslOp2Yk7wH4Mxy 2sh2dn96G0KOAHEeEn3BN6IWlnD1TADZbHdpTtMwkdv48Xwn0sP1s+3QDM4pb3gP n+z+dVxS8FouDIy/eiso3IBCj3g4TWbEX8ZHqs3jKqe0lZgAXBzB9xYSUowcEBrZ ddkPbr8p8ozWyOG+9V8= =lkK7 -----END PGP SIGNATURE-----

2 3

[libvirt-users] virRandomBits - not very random
by Brian Rak 01 Jun '18

01 Jun '18

I just ran into an issue where I had about 30 guests get duplicate mac addresses assigned. These were scattered across 30 different machines. Some debugging revealed that: 1) All the host machines were restarted within a couple seconds of each other 2) All the host machines had fairly similar libvirtd pids (within ~100 PIDs of each other) 3) Libvirt seeds the RNG using 'time(NULL) ^ getpid()' This perfectly explains why I saw so many duplicate mac addresses. Why is the RNG seed such a predictable value? Surely there has to be a better source of a random seed then the timestamp and the pid? The PID seems to me to be a very bad source of any randomness. I just ran a test across 60 of our hosts. 43 of them shared their PID with at least one other machine.

7 13

[libvirt-users] Libvirt bite sized tasks
by Michal Privoznik 20 Mar '16

20 Mar '16

Dear lists, I've just started new wiki page which aim is to summarize small and trivial tasks, that starting contributors can take, investigate and implement. The aim is to give them something easy to start with while not scaring them out about complexity of our code. The page can be found here: http://wiki.libvirt.org/page/BiteSizedTasks The name is copied from qemu wiki: http://wiki.qemu.org/BiteSizedTasks Please, feel free to extend the list. I plan to use it in the future when interviewing GSoC candidates. Michal

2 1

[libvirt-users] unable to dissect libvirt rpc packets using wireshark plugin
by gowrishankar 20 Jan '16

20 Jan '16

Hi, I am trying libvirt plugin in wireshark to dissect RPC payload in TCP, but finding dissector code not really working. My env is Fedora core 21 (x86_64) and installed packages are as follow: wireshark-1.12.6-1.fc21.x86_64 libvirt-wireshark-1.2.9.3-2.fc21.x86_64 Earlier, just after installation, I noticed libvirt.so available only in /usr/lib64/wireshark/plugins/1.12.5/ . Wireshark could not load libvirt plugin. So, I copied above .so into 1.12.6/ under same plugins folder, following it wireshark could list libvirt as supported protocol. tshark -G protocols | grep libvirt Libvirt libvirt libvirt However, on checking with some pcaps which has libvirt RPC calls captured on wire, wireshark does not list libvirt RPC packets, as I search for "libvirt" protocol in pcap. Have anyone experienced this before or if you have any pointer that I could check in my env, that would be very helpful. -- Regards, Gowrishankar M

2 6

[libvirt-users] Efficient live disk backup with active blockcommit : Failed 'block-commit': Could not reopen file: Permission denied
by Keyur Bhalerao 06 Jan '16

06 Jan '16

Hi , Working on the simple POC : Advanced snapshot using libvirt and qemu . Following are the exact steps which are followed . 1. Created as base VM - Ubuntu 15.10 with following libvirt and qemu versions Using library: libvirt 1.2.16 Using API: QEMU 1.2.16 Running hypervisor: QEMU 2.3.0 QEMU emulator version 2.3.0 (Debian 1:2.3+dfsg-5ubuntu9.1), Copyright (c) 2003-2008 Fabrice Bellard 2.Created nested VM (vm-01) using VirtManager on base VM. 3.Used following commands to take the multiple snapshots - virsh # list Id Name State ---------------------------------------------------- 7 vm-01 running virsh # domblklist vm-01 Target Source ------------------------------------------------ vda /home/ubuntu/vm-01.img hda /dev/sr0 snapshot-create-as --domain vm-01 snap1 --diskspec vda,file=/var/lib/libvirt/sn1.qcow2 --disk-only --atomic snapshot-create-as --domain vm-01 snap2 --diskspec vda,file=/var/lib/libvirt/sn2.qcow2 --disk-only --atomic virsh #snapshot-list vm-01 ------------------------------------------------------------ snap1 2015-12-07 11:51:51 -0800 disk-snapshot snap2 2015-12-07 11:52:28 -0800 disk-snapshot virsh # snapshot-list vm-01 --tree snap1 | +- snap2 List the current block device in use, again. It can be noticed, the new overlay 'sn2.qcow2' is the current disk in use: virsh # domblklist vm-01 Target Source ------------------------------------------------ vda /var/lib/libvirt/sn2.qcow2 hda /dev/sr0 Now that the backup is finished, perform active blockcommit by live mergning contents of sn2 into base: ubuntu@keyurubuntu:~$ virsh blockcommit vm-01 vda --active --verbose --pivot error: internal error: unable to execute QEMU command 'block-commit': Could not reopen file: Permission denied I am not sure why this is getting as permission denied. I have tried couple of times reinstalling and creating new VMs . Every time when i have tried to block-commit getting landed into same error. Is there any troubleshooting or solution to this issue. Stuck on this issue for last 2 days. Quick help much appreciated. Thanks, Keyur Bhalerao Reference used - http://wiki.libvirt.org/page/Live-disk-backup-with-active-blockcommit - http://kashyapc.com/2012/09/14/externaland-live-snapshots-with-libvirt/

3 7

[libvirt-users] Hypervisor loses network connectivity
by Phill Edwards 04 Jan '16

04 Jan '16

I have been running KVM on a CentOS 7.1 host for a few months. I have one "main" host server plus a "backup" host server. Some time ago everything was running fine on "main", but all of a sudden the server became non-contactable on it's network interface. I could no longer SSH in and therefore couldn't run virt-manager. I don't know what caused this and I had to bring all the VMs up on "backup" and they've been running OK there ever since. Over the last few days I've rebuilt "main" and again all was going well and I migrated 4 of the 5 VMs back onto it. Then this morning I came to set up the final VM on "main" which is a Sophos firewall machine with 3 NICs (I have 3 physical NICs). Nothing uses 2 of the 3 NICs except the Sophos VM. I unplugged one of the ethernet cables from "backup" and plugged it into the 3rd NIC on "main" and all of a sudden "main" froze and again all network connectivity was lost. I rebooted it but the problem still remains that it's not contactable over the network and is therefore totally non-functional. When I log in at the console and run "ip a" I can see various network interfaces including br0 with the expected IP address - so it looks like it's got network connectivity but it hasn't. Has anyone else experienced this and know why it happens and how to fix it? I don't think I fancy rebuilding everything a 3rd time as it seems likely to happen again. Depending on why it's happening I'm thinking of moving off CentOS onto Ubuntu as the host OS, or moving away from KVM altogether. Thanks in advance for any help you can give.

2 1

[libvirt-users] QXL-driver for Windows 10
by Dominique Ramaekers 24 Dec '15

24 Dec '15

Hi, I can't seem to find a QXL-driver for Windows 10. The qxl-0.1-21 won't install due to being incompatible to Windows 10. Am I missing something? Thanks in advance, Dominique.

1 0

[libvirt-users] double nat - common setup
by lejeczek 22 Dec '15

22 Dec '15

hi everybody my mind must have gone blank & eyes blind, I'm hoping it's simple and somebody can shed the light on bit I cannot see. a regular default net: <network> <name>default</name> <uuid>4c0a0c44-7e8a-493b-a57c-87cd38eaa0f7</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0'/> ... a winbox on that net and I cannot access it from/via Internet, port forwarding fixed on the default gw/internet interface (or rather firewalld's zone), it forwards to winbox. what is it?

2 2

[libvirt-users] Setting environment variables for LXC Containers
by Harish Vishwanath 22 Dec '15

22 Dec '15

Hello Is there a way to set custom environment variables for LXC containers so that it is available for all processes within the container? The libvirt-lxc driver seems to be setting up only the below variables (as per the docs), but there doesn't seem to be a way customize it. containerThe fixed string libvirt-lxc to identify libvirt as the creator container_uuidThe UUID assigned to the container by libvirtPATHThe fixed string /bin:/usr/binTERMThe fixed string linuxHOMEThe fixed string / In addition to the standard variables, the following libvirt specific environment variables are also provided LIBVIRT_LXC_NAMEThe name assigned to the container by libvirt LIBVIRT_LXC_UUIDThe UUID assigned to the container by libvirt LIBVIRT_LXC_CMDLINEThe unparsed command line arguments specified in the container configuration. Use of this is discouraged, in favour of passing arguments directly to the container init process via the initarg config element. I am looking for something similar to this: https://linuxcontainers.org/lxc/manpages/man5/lxc.container.conf.5.html (lxc.environment) Regards, Harish

2 1

[libvirt-users] centos6.5 libvirt 1.2.14 virsh hang
by 王李明 21 Dec '15

21 Dec '15

hi all： my environment is centos6.5 libvirt version is 1.2.14-1 qemu version is 1.7.0-1 I use openstack create a windows guest about two days later I run virsh list but the the process is hang virsh list can not return any thing it hang then I run /etc/init.d/libvirtd restart it show libivrtd stop faild and start failed I run /etc/init.d/libvirtd status it show libvired dead but subsys locked who can help me ? thans

1 0