July 2013 - Users - libvirt List Archives

[libvirt-users] OSX: trying to use libvirt 1.1.0 with VirtualBox 4.2
by Brian Candler 14 Jul '13

14 Jul '13

I see that libvirt 1.1.0 should now support virtualbox 4.2, but I'm having problems getting it to work in OSX. I have built it using homebrew, which now has 1.1.0 in its formulae. The error I get when tying to connect is shown below. Any suggestions for where I should look next? The error about "Failed to find user record for uid 'NNNNN'" is odd. libvirtd *is* started automatically, and runs as my own userid (brian, id 502). Each time libvirtd times out, and restarts again, it shows a different uid in this error message. Thanks, Brian. Brians-MacBook-Air:~ $ virsh -c vbox:///session list error: failed to connect to the hypervisor error: no valid connection error: Failed to find user record for uid '32691': Success Brians-MacBook-Air:~ $ virsh -V Virsh command line tool of libvirt 1.1.0 See web site at http://libvirt.org/ Compiled with support for: Hypervisors: VMWare VirtualBox ESX Test Networking: Remote Storage: Dir SCSI Miscellaneous: Daemon Secrets Debug Readline Modular Brians-MacBook-Air:~ $ LIBVIRT_DEBUG=1 virsh -c vbox:///session list 2013-07-14 20:18:52.004+0000: 18446744073709551615: info : libvirt version: 1.1.0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virGlobalInit:436 : register drivers 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e39fa58 name=Test 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering Test as driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterNetworkDriver:609 : registering Test as network driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterInterfaceDriver:636 : registering Test as interface driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterStorageDriver:663 : registering Test as storage driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterNodeDeviceDriver:690 : registering Test as device driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterSecretDriver:717 : registering Test as secret driver 0 2013-07-14 20:18:52.004+0000: 18446744073709551615: debug : virRegisterNWFilterDriver:744 : registering Test as network filter driver 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e3a10e8 name=VMWARE 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering VMWARE as driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e3a16e0 name=ESX 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering ESX as driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterInterfaceDriver:636 : registering ESX as interface driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNetworkDriver:609 : registering ESX as network driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterStorageDriver:663 : registering ESX as storage driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNodeDeviceDriver:690 : registering ESX as device driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterSecretDriver:717 : registering ESX as secret driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNWFilterDriver:744 : registering ESX as network filter driver 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:762 : driver=0x10e3a0420 name=remote 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterDriver:774 : registering remote as driver 3 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNetworkDriver:609 : registering remote as network driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterInterfaceDriver:636 : registering remote as interface driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterStorageDriver:663 : registering remote as storage driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNodeDeviceDriver:690 : registering remote as device driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterSecretDriver:717 : registering remote as secret driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virRegisterNWFilterDriver:744 : registering remote as network filter driver 2 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventRegisterDefaultImpl:230 : registering default event implementation 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollAddHandle:111 : Used 0 handle slots, adding at least 10 more 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollInterruptLocked:712 : Skip interrupt, 0 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=1 fd=4 events=1 cb=0x10e1b313f opaque=0x0 ff=0x0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventRegisterImpl:203 : addHandle=0x10e1b1b1b updateHandle=0x10e1b1df6 removeHandle=0x10e1b1f2d addTimeout=0x10e1b2064 updateTimeout=0x10e1b2212 removeTimeout=0x10e1b2385 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virConnectOpenAuth:1446 : name=vbox:///session, auth=0x10e39f940, flags=0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c45d60 classname=virConnect 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 1 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630d00050 classname=virConnectCloseCallbackData 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.005+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=1 timeout=-1 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1158 : name "vbox:///session" to URI components: scheme vbox server (null) user (null) port 0 path /session 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 0 (Test) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1211 : driver 0 Test returned DECLINED 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 1 (VMWARE) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1211 : driver 1 VMWARE returned DECLINED 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 2 (ESX) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1211 : driver 2 ESX returned DECLINED 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : do_open:1204 : trying driver 3 (remote) ... 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : remoteConnectOpen:978 : Auto-spawn user daemon instance 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : doRemoteOpen:590 : proceeding with name = vbox:///session 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : doRemoteOpen:599 : Connecting with transport 1 2013-07-14 20:18:52.006+0000: 18446744073709551615: debug : doRemoteOpen:688 : Proceeding with sockname /Users/brian/.cache/libvirt/libvirt-sock 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetSocketNew:155 : localAddr=0x7fff6dd47340 remoteAddr=0x7fff6dd472b0 fd=6 errfd=-1 pid=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c465d0 classname=virNetSocket 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetSocketNew:205 : RPC_SOCKET_NEW: sock=0x7fa630c465d0 fd=6 errfd=-1 pid=0 localAddr=127.0.0.1;0, remoteAddr=127.0.0.1;0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c46440 classname=virNetClient 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetClientNew:326 : RPC_CLIENT_NEW: client=0x7fa630c46440 sock=0x7fa630c465d0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46440 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c465d0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollAddHandle:136 : EVENT_POLL_ADD_HANDLE: watch=2 fd=6 events=1 cb=0x10e28e43e opaque=0x7fa630c465d0 ff=0x10e28e489 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virKeepAliveNew:196 : client=0x7fa630c46440, interval=-1, count=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630d004d0 classname=virKeepAlive 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virKeepAliveNew:215 : RPC_KEEPALIVE_NEW: ka=0x7fa630d004d0 client=0x7fa630c46440 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46440 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630d00050 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c467b0 classname=virNetClientProgram 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c46210 classname=virNetClientProgram 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectNew:203 : OBJECT_NEW: obj=0x7fa630c46240 classname=virNetClientProgram 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c467b0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46210 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46240 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : doRemoteOpen:805 : Trying authentication 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=1 w=2, f=6 e=1 d=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetMessageNew:46 : msg=0x7fa630d00450 tracked=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetMessageEncodePayload:383 : Encode length as 28 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=2 timeout=-1 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetClientSendInternal:1959 : RPC_CLIENT_MSG_TX_QUEUE: client=0x7fa630c46440 len=28 prog=536903814 vers=1 proc=66 type=0 status=0 serial=0 2013-07-14 20:18:52.007+0000: 18446744073709551615: debug : virNetClientCallNew:1912 : New call 0x7fa630d00570: msg=0x7fa630d00450, expectReply=1, nonBlock=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIO:1719 : Outgoing message prog=536903814 version=1 serial=0 proc=66 type=0 length=28 dispatch=0x0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIO:1778 : We have the buck head=0x7fa630d00570 call=0x7fa630d00570 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=2 events=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 2 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=1 w=2, f=6 e=0 d=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=1 timeout=-1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetMessageDecodeLength:153 : Got length, now need 192 total (188 more) 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientCallDispatch:1126 : RPC_CLIENT_MSG_RX: client=0x7fa630c46440 len=192 prog=536903814 vers=1 proc=66 type=1 status=1 serial=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virKeepAliveCheckMessage:374 : ka=0x7fa630d004d0, client=0x7fa630c46440, msg=0x7fa630c464c0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetMessageClear:57 : msg=0x7fa630c464c0 nfds=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1425 : Giving up the buck 0x7fa630d00570 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1439 : No thread to pass the buck to 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=2 events=1 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virNetClientIO:1808 : All done with our call head=0x0 call=0x7fa630d00570 rv=0 2013-07-14 20:18:52.008+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetMessageFree:74 : msg=0x7fa630d00450 nfds=0 cb=0x0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c467b0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46210 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46240 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientCloseInternal:686 : client=0x7fa630c46440 wantclose=0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientMarkClose:632 : client=0x7fa630c46440, reason=3 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventRunDefaultImpl:270 : running default event implementation 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollRemoveHandle:193 : mark delete 1 6 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollInterruptLocked:712 : Skip interrupt, 0 4537835520 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1425 : Giving up the buck 0x0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientIOEventLoopPassTheBuck:1439 : No thread to pass the buck to 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:552 : Found 0 out of 0 timeout slots used, releasing 0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientCloseLocked:645 : client=0x7fa630c46440, sock=0x7fa630c465d0, reason=3 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollCleanupHandles:577 : EVENT_POLL_PURGE_HANDLE: watch=2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectRef:297 : OBJECT_REF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virKeepAliveStop:307 : RPC_KEEPALIVE_STOP: ka=0x7fa630d004d0 client=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630d004d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630d004d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetSocketDispose:1004 : RPC_SOCKET_DISPOSE: sock=0x7fa630c465d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virKeepAliveDispose:227 : RPC_KEEPALIVE_DISPOSE: ka=0x7fa630d004d0 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virEventPollRemoveHandle:180 : EVENT_POLL_REMOVE_HANDLE: watch=2 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c46440 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virFileClose:90 : Closed fd 6 2013-07-14 20:18:52.009+0000: 18446744073709551615: debug : virNetClientDispose:598 : RPC_CLIENT_DISPOSE: client=0x7fa630c46440 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollMakePollFDs:393 : Prepare n=0 w=1, f=4 e=1 d=0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630d00050 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:332 : Calculate expiry of 0 timers 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c467b0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCalculateTimeout:361 : Timeout at 0 due in -1 ms 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c467b0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollRunOnce:629 : EVENT_POLL_RUN: nhandles=1 timeout=-1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46210 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c46210 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c46240 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c46240 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virFileClose:90 : Closed fd 8 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virFileClose:90 : Closed fd 7 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virNetMessageClear:57 : msg=0x7fa630c464c0 nfds=0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : do_open:1211 : driver 3 remote returned ERROR 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630c45d60 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630c45d60 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:260 : OBJECT_UNREF: obj=0x7fa630d00050 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virObjectUnref:262 : OBJECT_DISPOSE: obj=0x7fa630d00050 error: failed to connect to the hypervisor error: no valid connection error: Failed to find user record for uid '32691': Success 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollAddTimeout:225 : Used 0 timeout slots, adding at least 10 more 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollInterruptLocked:716 : Interrupting 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollAddTimeout:248 : EVENT_POLL_ADD_TIMEOUT: timer=1 frequency=0 cb=0x10e14d03f opaque=0x0 ff=0x0 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollRunOnce:640 : Poll got 1 event(s) 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:425 : Dispatch 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchTimeouts:448 : EVENT_POLL_DISPATCH_TIMEOUT: timer=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchHandles:470 : Dispatch 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchHandles:484 : i=0 w=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollDispatchHandles:498 : EVENT_POLL_DISPATCH_HANDLE: watch=1 events=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCleanupTimeouts:516 : Cleanup 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollCleanupHandles:564 : Cleanup 1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollRemoveTimeout:300 : EVENT_POLL_REMOVE_TIMEOUT: timer=1 2013-07-14 20:18:52.010+0000: 18446744073709551615: debug : virEventPollInterruptLocked:712 : Skip interrupt, 0 4537835520 Brians-MacBook-Air:~ $ Here's the output from the configure step (using brew install -v) configure: configure: Configuration summary configure: ===================== configure: configure: Drivers configure: configure: Xen: no configure: QEMU: no configure: UML: no configure: OpenVZ: no configure: VMware: yes configure: VBox: yes configure: XenAPI: no configure: xenlight: no configure: LXC: no configure: PHYP: no configure: ESX: yes configure: Hyper-V: no configure: Parallels: no configure: Test: yes configure: Remote: yes configure: Network: no configure: Libvirtd: yes configure: Interface: no configure: macvtap: no configure: virtport: no configure: configure: Storage Drivers configure: configure: Dir: yes configure: FS: no configure: NetFS: no configure: LVM: no configure: iSCSI: no configure: SCSI: yes configure: mpath: no configure: Disk: no configure: RBD: no configure: Sheepdog: no configure: configure: Security Drivers configure: configure: SELinux: no () configure: AppArmor: no configure: configure: Driver Loadable Modules configure: configure: dlopen: configure: configure: Libraries configure: configure: apparmor: no configure: attr: no configure: audit: no configure: avahi: no configure: blkid: no configure: capng: no configure: curl: yes (CFLAGS='-DCURL_DISABLE_TYPECHECK ' LIBS='-lcurl ') configure: dbus: no configure: fuse: no configure: hal: no configure: netcf: no configure: numactl: no configure: openwsman: no configure: pciaccess: no configure: sanlock: no configure: sasl: yes (CFLAGS='' LIBS='-lsasl2') configure: selinux: no configure: ssh2: no configure: udev: no configure: yajl: yes (CFLAGS='' LIBS='-lyajl') configure: libxml: -I/usr/include/libxml2 -lxml2 configure: dlopen: configure: openwsman: no configure: gnutls: -I/usr/local/Cellar/libtasn1/3.3/include -I/usr/local/Cellar/p11-kit/0.18.1/include/p11-kit-1 -I/usr/local/Cellar/gnutls/3.1.10/include -DGCRYPT_NO_DEPRECATED -L/usr/local/Cellar/gnutls/3.1.10/lib -lgnutls -lgcrypt configure: firewalld: no configure: polkit: no configure: xen: no configure: xenapi: no configure: xenlight: no configure: pcap: no configure: nl: no configure: mscom: no configure: xdr: configure: rbd: no configure: configure: Test suite configure: configure: Coverage: no configure: Alloc OOM: no configure: configure: Miscellaneous configure: configure: Debug: yes configure: Use -Werror: no configure: Warning Flags: -W -Waddress -Wall -Warray-bounds -Wattributes -Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wcomment -Wcomments -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wempty-body -Wendif-labels -Wextra -Wformat-extra-args -Wformat-security -Wformat-y2k -Wformat-zero-length -Wformat=2 -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast -Winvalid-pch -Wmain -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-format-attribute -Wmissing-include-dirs -Wmissing-noreturn -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wold-style-definition -Woverflow -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wreturn-type -Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wswitch -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvariadic-macros -Wvolatile-register-var -Wwrite-strings -Wno-missing-field-initializers -Wno-sign-compare -Wno-format-nonliteral -Wframe-larger-than=4096 -fexceptions -fasynchronous-unwind-tables -fdiagnostics-show-option -funit-at-a-time configure: Readline: yes configure: Python: yes configure: DTrace: no configure: numad: no configure: XML Catalog: /etc/xml/catalog configure: Init script: none configure: Char device locks: no configure: configure: Privileges configure: configure: QEMU: root:root configure: If I run libvirtd by itself manually with the -v flag, this is all I get: Brians-MacBook-Air:~ $ /usr/local/Cellar/libvirt/1.1.0/sbin/libvirtd -v 2013-07-14 20:26:14.853+0000: 18446744073709551615: info : libvirt version: 1.1.0 2013-07-14 20:26:14.853+0000: 18446744073709551615: error : virGetUserEnt:696 : Failed to find user record for uid '32704': Success All entries in /usr/local/etc/libvirt/libvirtd.conf are commented out.

1 0

[libvirt-users] ★ Libvirt Users, Rene Bon Ciric te ha dejado un mensaje
by Badoo 13 Jul '13

13 Jul '13

Rene Bon Ciric te ha dejado un mensaje Este mensaje es personal. Sólo tú y su remitente tenéis acceso a él y te recordamos que lo puedes eliminar en cualquier momento. Si quieres responder puedes hacerlo desde el chat. Para leer tu mensaje, haz clic en el siguiente enlace: http://us1.badoo.com/renich/in/l-47pIIAagA/?lang_id=7&g=57&m=21&mid=51e1403… Otras personas de tu zona están en Badoo Marioo (Guadalajara, México) Angela (Guadalajara, México) http://us1.badoo.com/renich/in/l-47pIIAagA/?lang_id=7&g=57&m=21&mid=51e1403… Si al hacer clic en el enlace de este mensaje no funciona, copia y pégalo en la barra de tu navegador. Este email es parte del proceso de entrega del mensaje enviado por Rene Bon Ciric. Si has recibido este email por error, por favor ignóralo. En un breve periodo de tiempo será eliminado del sistema. ¡Divértete! El Equipo de Badoo Has recibido este email de Badoo Trading Limited (dirección postal a continuación). Si no desea recibir futuras comunicaciones por parte de Badoo, haz clic aquí para desactivarlas: https://us1.badoo.com/impersonation.phtml?lang_id=7&email=libvirt-users%40r… Badoo Trading Limited es una sociedad de responsabilidad limitada registrada en Inglaterra y Gales con número 7540255 y domicilio en Media Village, 131 - 151 Great Titchfield Street, Londres, W1W 5BB.

1 0

[libvirt-users] Permission problem with /dev/net/tun
by Thomas Karcher 11 Jul '13

11 Jul '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi lxc folks, the symptom my libvirt LXC container suffers from is: root@depot:/dev/net# ls -la total 0 drwxr-xr-x 2 root root 40 Jun 29 16:26 . drwxr-xr-x 5 root root 480 Jun 29 16:26 .. root@depot:/dev/net# mknod tun c 10 200 mknod: `tun': Operation not permitted The host is an up-to-date AMD64 Ubuntu raring on 3.8.0-25-generic that was formerly installed from precise and then upgraded. The guest is Ubuntu precise; however, I see the same symptom in another raring container on the same host. What I tried to resolve this: 1) On the host, I echoed various stuff to the cgroup device files: cd /sys/fs/cgroup/devices/libvirt/lxc echo "c 10:200 rwm" > devices.allow echo "c 10:200 rwm" > depot/devices.allow echo a > depot/devices.allow ... and I see the successful results in depot/devices.list, but no success. 2) I inserted a line "/dev/net/tun rwk," into /etc/apparmor.d/abstractions/lxc/container-base - no change. (I know, it seems kind of pointless - because it's about permissions to a device, not a path. You may deduce my desperation from this ... SELinux is not active. Mounts on /dev look normal to me: devfs on /dev type tmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) devpts on /dev/ptmx type devpts (rw,nosuid,relatime,gid=5,mode=620,ptmxmode=666) cgroup on /sys/fs/cgroup/devices type cgroup (rw,relatime,devices) Now comes the weird part: Once I umount /dev inside the container, the "hidden" /dev appears which contains a usable /dev/net/tun. So the mknod problem is probably due to the dropped capabilities - but why/how mounts the container a more restricted /dev on top of the prepared one ...? Thanks & regards Thomas -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlHYdysACgkQiMyIQtYO79yUMQCfUrbaAWcZsqYkopRL6F2evWdq XnMAoOq6/wopgBGZniWDGnIiYBEsFX61 =BIr9 -----END PGP SIGNATURE-----

3 8

[libvirt-users] guests not shutting down when host shuts down
by Lentes, Bernd 10 Jul '13

10 Jul '13

Hi, i have a SLES 11 SP2 64bit host with three guests: - Windows XP 32 - Ubuntu 12.04 LTS 64bit - SLES 11 SP2 64bit The SLES guest shuts down with the host shutdown. The others not. When i shutdown these two guests with the virt-manager, they shutdown fine. ACPI is activated in virt-manager for both of them. Acpid is running in the Ubuntu Client. When the host shuts down, the two guests get a signal (excerpt from the log of the host:) =========================================================== 2013-07-07 16:39:51.674: starting up LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -S -M pc-0.15 -enable-kvm -m 1025 -smp 1,sockets=1,cores=1,threads=1 -name greensql_2 -uuid 2cfbac9c-dbb2-c4bf-4aba-2d18dc49d18e -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/greensql_2.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/kvm/images/greensql_2/disk0.raw,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=17,id=hostnet0,vhost=on,vhostfd=20 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:37:92:a9,bus=pci.0,addr=0x3 -usb -vnc 127.0.0.1:2 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Domain id=3 is tainted: high-privileges qemu: terminating on signal 15 from pid 24958 2013-07-08 13:58:29.651: starting up ========================================================== I'm a bit astonished about "no-shutdown" in the commandline, but the sles guest also has it in its commandline, so it should not bother. I'm using kvm-0.15.1-0.23.1, libvirt-client-0.9.6-0.23.1, libvirt-0.9.6-0.23.1 and virt-manager-0.9.0-3.19.1 in the host. Thanks for any help. Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg Wer nichts verdient außer Geld verdient nichts außer Geld Helmholtz Zentrum München Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH) Ingolstädter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir´in Bärbel Brumme-Bothe Geschäftsführer: Prof. Dr. Günther Wess Dr. Nikolaus Blum Dr. Alfons Enhsen Registergericht: Amtsgericht München HRB 6466 USt-IdNr: DE 129521671

2 4

[libvirt-users] Connect issue - libvirt.dylib
by Utpal Das 10 Jul '13

10 Jul '13

Hi All, I am trying to use libvirt to connect to hypervisor. I need some help with this. 1. I am using mac os - Mountain Lion. 2. I have installed libvirt using macports. 3. I am able to connect to the vcenter server using virsh tool. 4. However i am not able to connect using libvirt java program. The issue it seems that virt library cannot be found. (Sample output attached). The question is how do i get libvirt.dylib on my mac. Any pointers would be really helpful Re, Utpal Exception in thread "main" java.lang.UnsatisfiedLinkError: Unable to load library 'virt': Native library (darwin/libvirt.dylib) not found in resource path

1 0

Re: [libvirt-users] Libvirt and Glusterfs
by Vijay Bellur 10 Jul '13

10 Jul '13

> Hi, > > I'm trying to use qemu native glusterfs integration with libvirt. It's > all working well from the qemu side, but libvirt fails to start a domain > with a gluster drive or attach a drive. > I have exactly the same error as this person: > https://www.redhat.com/archives/libvirt-users/2013-April/msg00204.html > > I use qemu 1.5.1 with glusterfs 3.4 beta 4 and libvirt 1.0.6. > > [root bbox ~]# virsh start test > error: Failed to start domain test > error: internal error process exited while connecting to monitor: char > device redirected to /dev/pts/3 (label charserial0) > qemu-system-x86_64: -drive > file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw: > Gluster connection failed for server=127.0.0.1 port=0 volume=vol0 > image=test0.img transport=tcp > qemu-system-x86_64: -drive > file=gluster://127.0.0.1/vol0/test0.img,if=none,id=drive-virtio-disk1,format=raw: > could not open disk image gluster://127.0.0.1/vol0/test0.img: No data > available > Do you observe errors in the logs from gluster bricks that make up vol0? Brick logs are available at /var/log/glusterfs/bricks. Thanks, Vijay

2 3

[libvirt-users] python equiv to perl list_domains()
by Brett Y 10 Jul '13

10 Jul '13

Hey, I'm trying to figure out a way to get a list of the running domains on a dom0. I can get the ID's but I'd prefer the names. We have another script written in perl, but I'm trying to get some other functionality in python as well as work on converting it all to python. It looks like perl has a list_domains() that will, according to the libvirt doc, "Return a list of all running domains currently known to the VMM". And this works for us, but I can't get the same thing in python as listAllDomains doesn't work with the version of libvirt running on RHEL 5.9 >From our machine that will be running the script RHEL 5.9 yum list | grep libvirt libvirt.x86_64 0.8.2-29.el5_9.1 libvirt-python.x86_64 0.8.2-29.el5_9.1 from the dom0 RHEL 5.9 yum list | grep xen xen.x86_64 3.0.3-142.el5_9.2 xen-libs.i386 3.0.3-142.el5_9.2 xen-libs.x86_64 3.0.3-142.el5_9.2 yum list | grep libvirt libvirt.i386 0.8.2-29.el5_9.1 installed libvirt.x86_64 0.8.2-29.el5_9.1 installed This is the error if I try to do listAllDomains from a FC18 box >>> conn.listAllDomains(1) libvir: Remote Driver error : unknown procedure: 273 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3695, in listAllDomains raise libvirtError("virConnectListAllDomains() failed", conn=self) libvirt.libvirtError: unknown procedure: 273

2 1

[libvirt-users] Unable to allocate multiple vcpus using virt-install
by Peeyush Gupta 09 Jul '13

09 Jul '13

I am trying to run a VM on Ubuntu 12.04 which in turn is guest on Fedora 18 host. I am using qemu, kvm and libvirt. I tried to run the following command: virt-install --name dsl --ram 1024 --vcpus 2 --cdrom /home/peeyush/Downloads/some_iso_file.iso --disk path=/path_to_disk My machine here runs with only one vcpu. While when I tried the exact same thing on my Fedora 18 host, it shows two cpus. What am I doing wrong? Thanks. ~Peeyush Gupta

1 0

[libvirt-users] Xen + libvirt: VM name 'Domain-Unnamed' already exists
by Postmaster - Aton Tech 09 Jul '13

09 Jul '13

I had to restart a paravirt guest and could not start over again. It's a xenstore crash? Compiled against library: libvirt 1.0.3 Using library: libvirt 1.0.3 Usando a API: Xen 1.0.3 Hypervisor em execução: Xen 4.2.0 CentOS 6 - x64 Linux eagle 3.9.8-1.el6xen.x86_64 #1 SMP Sat Jun 29 16:23:39 EST 2013 x86_64 x86_64 x86_64 GNU/Linux I've got this error: ... [07.08.2013 08:21:45 3322] INFO (XendDomainInfo: 169) Recreating domain 13, UUID 0a1ddba3-c1d7-5675-9e5d-1b79d02b5ea2. at / local/domain/13 [07.08.2013 08:21:45 3322] WARNING (XendDomainInfo: 191) / vm/0a1ddba3-c1d7-5675-9e5d-1b79d02b5ea2/uuid / is missing. recreate is confused, trying our best to recover [07.08.2013 08:21:45 3322] ERROR (XendDomain: 447) Unable to recreate domain Traceback (most recent call last): File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomain.py", line 445, in _refreshTxn new_dom XendDomainInfo.recreate = (dom, False) File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 204, in recreate vmpath = vmpath) File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 455, in __ init__ self._checkName (self.info ['name_label']) File "/ usr/lib64/python2.6/site-packages/xen/xend/XendDomainInfo.py", line 3524, in _checkName ("The domain% s"% str (dom.domid)) or "")) VmError: VM name 'Domain-Unnamed' already exists ...

1 0

[libvirt-users] deadlock on connection loosing
by Александр 09 Jul '13

09 Jul '13

libvirtd will lock if for example kill programm which established connection, only sigkill + restart helps., to reproduce: virConnectPtr libvirt_connection = virConnectOpen("qemu:///system"); if(libvirt_connection == NULL) { std::cout<<"failed to connect to qemu:///system\n"; exit(-1); } exit(0);

2 7