July 2011 - Users - Libvirt List Archives

Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?

by sharmila radha krishnan

Hi,  I was finally able to connect to the xenapi hypervisor.  However, once I connect to virsh and give a 'quit' command I get  "* glibc detected *** virsh: double free or corruption (fasttop):". Please find below the actual memory dump.   Note: I have disabled the SSL certificate verification in xenapi_driver.c by setting curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0) & curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0).     [root@sharmila libvirt-0.9.2]# virsh -c "xenapi://localhost" Enter username for localhost: root Enter root's password for localhost: Welcome to virsh, the virtualization interactive terminal.    Type:  'help' for help with commands        'quit' to quit    virsh # list --all  Id Name                 State ----------------------------------   0 Control domain on host: sharmila running   - Control domain on host: sharmila running   - XenServer SDK 5.6.100-47101p import shut off    virsh # quit    *** glibc detected *** virsh: double free or corruption (fasttop): 0x09fcc370 *** ======= Backtrace: ========= /lib/libc.so.6[0xb6fc56c5] /lib/libc.so.6(cfree+0x59)[0xb6fc5b09] /usr/local/lib/libvirt.so.0(virFree+0x42)[0xb760d712] /usr/local/lib/libvirt.so.0[0xb777031d] /usr/local/lib/libvirt.so.0[0xb776ec10] /usr/local/lib/libvirt.so.0[0xb7676017] /usr/local/lib/libvirt.so.0(virUnrefConnect+0x128)[0xb7677888] /usr/local/lib/libvirt.so.0(virConnectClose+0xda)[0xb769ad4a] virsh[0x8065c73] virsh[0x806672f] /lib/libc.so.6(__libc_start_main+0xdc)[0xb6f71e9c] virsh[0x804e0f1] ======= Memory map: ======== 08048000-08079000 r-xp 00000000 08:01 378273     /usr/local/bin/virsh 08079000-0807a000 rw-p 00031000 08:01 378273     /usr/local/bin/virsh 09fa1000-0a060000 rw-p 00000000 00:00 0          [heap] b6b61000-b6b6c000 r-xp 00000000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6c000-b6b6d000 rw-p 0000a000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6d000-b6b77000 r-xp 00000000 08:01 181027     /lib/libnss_files-2.5.so b6b77000-b6b78000 r--p 00009000 08:01 181027     /lib/libnss_files-2.5.so b6b78000-b6b79000 rw-p 0000a000 08:01 181027     /lib/libnss_files-2.5.so b6b81000-b6b83000 rw-p 00000000 00:00 0 b6b83000-b6d83000 r--p 00000000 08:01 447132     /usr/lib/locale/locale-archive b6d83000-b6d86000 rw-p 00000000 00:00 0 b6d86000-b6d88000 r-xp 00000000 08:01 180820     /lib/libkeyutils-1.2.so b6d88000-b6d89000 rw-p 00001000 08:01 180820     /lib/libkeyutils-1.2.so b6d89000-b6d91000 r-xp 00000000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d91000-b6d92000 rw-p 00007000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d92000-b6d99000 r-xp 00000000 08:01 182148     /lib/librt-2.5.so b6d99000-b6d9a000 r--p 00007000 08:01 182148     /lib/librt-2.5.so b6d9a000-b6d9b000 rw-p 00008000 08:01 182148     /lib/librt-2.5.so b6d9b000-b6dab000 r-xp 00000000 08:01 180816     /lib/libresolv-2.5.so b6dab000-b6dac000 r--p 0000f000 08:01 180816     /lib/libresolv-2.5.so b6dac000-b6dad000 rw-p 00010000 08:01 180816     /lib/libresolv-2.5.so b6dad000-b6daf000 rw-p 00000000 00:00 0 b6daf000-b6ddf000 r-xp 00000000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6ddf000-b6de0000 rw-p 0002f000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6de0000-b6de1000 rw-p 00000000 00:00 0 b6de1000-b6de3000 r-xp 00000000 08:01 180823     /lib/libcom_err.so.2.1 b6de3000-b6de4000 rw-p 00001000 08:01 180823     /lib/libcom_err.so.2.1 b6de4000-b6e0a000 r-xp 00000000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0a000-b6e0b000 rw-p 00025000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0b000-b6e9f000 r-xp 00000000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6e9f000-b6ea2000 rw-p 00093000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6ea2000-b6ece000 r-xp 00000000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ece000-b6ecf000 rw-p 0002c000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ecf000-b6ed2000 r-xp 00000000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed2000-b6ed3000 rw-p 00002000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed3000-b6ed4000 rw-p 00000000 00:00 0 b6ed4000-b6f0f000 r-xp 00000000 08:01 182149     /lib/libsepol.so.1 b6f0f000-b6f10000 rw-p 0003b000 08:01 182149     /lib/libsepol.so.1 b6f10000-b6f1a000 rw-p 00000000 00:00 0 b6f1a000-b6f5a000 r-xp 00000000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5a000-b6f5b000 rw-p 00040000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5b000-b6f5c000 rw-p 00000000 00:00 0 b6f5c000-b70af000 r-xp 00000000 08:01 180994     /lib/libc-2.5.so b70af000-b70b1000 r--p 00153000 08:01 180994     /lib/libc-2.5.so b70b1000-b70b2000 rw-p 00155000 08:01 180994     /lib/libc-2.5.so b70b2000-b70b5000 rw-p 00000000 00:00 0 b70b5000-b70b8000 r-xp 00000000 08:01 180979     /lib/libdl-2.5.so b70b8000-b70b9000 r--p 00002000 08:01 180979     /lib/libdl-2.5.so b70b9000-b70ba000 rw-p 00003000 08:01 180979     /lib/libdl-2.5.so b70ba000-b70e1000 r-xp 00000000 08:01 182017     /lib/libm-2.5.so b70e1000-b70e2000 r--p 00026000 08:01 182017     /lib/libm-2.5.so b70e2000-b70e3000 rw-p 00027000 08:01 182017     /lib/libm-2.5.so b70e3000-b70e4000 rw-p 00000000 00:00 0 b70e4000-b70f6000 r-xp 00000000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f6000-b70f7000 rw-p 00011000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f7000-b7223000 r-xp 00000000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7223000-b7228000 rw-p 0012c000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7228000-b7229000 rw-p 00000000 00:00 0 b7229000-b723e000 r-xp 00000000 08:01 181033     /lib/libpthread-2.5.so b723e000-b723f000 r--p 00015000 08:01 181033     /lib/libpthread-2.5.so b723f000-b7240000 rw-p 00016000 08:01 181033     /lib/libpthread-2.5.so b7240000-b7242000 rw-p 00000000 00:00 0 b7242000-b7258000 r-xp 00000000 08:01 181005     /lib/libselinux.so.1 b7258000-b725a000 rw-p 00015000 08:01 181005     /lib/libselinux.so.1 b725a000-b7389000 r-xp 00000000 08:01 182129     /lib/libcrypto.so.0.9.8e b7389000-b739c000 rw-p 0012e000 08:01 182129     /lib/libcrypto.so.0.9.8e b739c000-b73a0000 rw-p 00000000 00:00 0 b73a0000-b73e4000 r-xp 00000000 08:01 180822     /lib/libssl.so.0.9.8e b73e4000-b73e8000 rw-p 00043000 08:01 180822     /lib/libssl.so.0.9.8e b73e8000-b7419000 r-xp 00000000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b7419000-b741a000 rw-p 00031000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b741a000-b741b000 rw-p 00000000 00:00 0 b741b000-b747b000 r-xp 00000000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747b000-b747f000 rw-p 00060000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747f000-b74a3000 r-xp 00000000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a3000-b74a4000 rw-p 00024000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a4000-b74a8000 r-xp 00000000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a8000-b74a9000 rw-p 00003000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a9000-b74ac000 rw-p 00000000 00:00 0 b74ac000-b752a000 r-xp 00000000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752a000-b752d000 rw-p 0007d000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752d000-b75a6000 r-xp 00000000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75a6000-b75ac000 rw-p 00078000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75ac000-b75ad000 rw-p 00000000 00:00 0 b75ad000-b75cc000 r-xp 00000000 08:01 180978     /lib/libdevmapper.so.1.02 b75cc000-b75ce000 rw-p 0001e000 08:01 180978     /lib/libdevmapper.so.1.02 b75cf000-b75d6000 r--s 00000000 08:01 412913     /usr/lib/gconv/gconv-modules.cache b75d6000-b75d7000 r-xp 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2 b75d7000-b75d8000 rw-p 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2Aborted    Moreover, Iam not able to start any VMs uisng xencenter after i have started using virsh. It says,  Error: Starting VM 'XenServer SDK 5.6.100-47101p import' - Internal error: another frontend device is already connected to this domain (frontend (domid=0 | kind=vbd | devid=51712); backend (domid=0 | kind=vbd | devid=51712)). Even a reboot of the machine didnt help.   Any pointers on the above 2 issues would be of great help.   Thanks in Advance!   Regards, Sharmila   From: "G Naresh Kumar"naresh.gadepalli(a)gmail.com Sent: Sat, 16 Jul 2011 16:55:16 +0530 To: Matthias Bolte matthias.bolte(a)googlemail.com Cc: libvirt-users(a)redhat.com Subject: Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?   Hi Matthias, > Sorry for the confusion.It was an edited one & hence thetypo. Below is the actual output: # virsh -c xenapi://<myip> Enter username for <myip>: root Enter root's password for <myip>: error: authentication failed: (null) I was not able to get anything in the Xen logs. Somehowfigured out to print the Xen error using the patch given at the link http://osdir.com/ml/libvir- list/2011-06/msg00298.html. It prints"TRANSPORT_FAULT". Any pointers to this error would be much appreciated. Iam also trying to debugthis issue. As per your suggestion, I had used make rpm. But it requires xen-devel pacakge,which I was not able to get for Xen 3.4.2. Is there any way where I canuse the source package and build & install the library without using'make rpm' ? Thanks for all the help. > Regards Naresh > On Thu, Jul 14, 2011 at 7:07 PM, Matthias Bolte <matthias.bolte(a)googlemail.com> wrote: > 2011/7/14 G Naresh Kumar <naresh.gadepalli(a)gmail.com>: >> Hi Maththias, > > Thanks for the help. I finally was able to compile/install libvirt on >> xenserver. >> >> I tried compiling the libvirt 0.9.2 with xen api support. Was able to >> install it successfully. When I tried giving the virsh command, I got an >> ‘authentication failed’ error as shown below. >> >> # virsh -c xenapi://<my local ip> >> Enter username for <mylocalip>: root > >Here you entered root > >> Enter intel123's password for <my local ip>: > >but here it asks for intel123's, that's unexpected. Did you edit this >one before mailing it, or is there really this mismatch? > >> error: authentication failed: (null) > >Outputting (null) here is actually a bug. The only way this can happen >is when the login attempt fails but the XenServer doesn't provide an >error message. Maybe have a look at the XenServer logs to see if it >says something about a failed login attempt. > >> I also tried connecting to the local machine as below, >> >> virsh -c "xenapi:///" >> error: authentication failed: Server name not in URI >> error: failed to connect to the hypervisor > >The XenAPI driver expects a server name. xenapi:/// _could_ be treated >as xenapi://localhost, but it's not implemented that way. > >> Also I am trying to install ruby-libvirt on xenserver, which looks like >> requires libvirt-devel package to be installed. How do I build it from the >> libvirt 0.9.2 source package. > >Running 'make rpm' should build an libvirt-devel RPM package for you. > >> Thanks, >> >> Naresh >> >> On Wed, Jun 15, 2011 at 8:19 PM, Matthias Bolte >> <matthias.bolte(a)googlemail.com> wrote: >>> >>> 2011/6/15 G Naresh Kumar <naresh.gadepalli(a)gmail.com>: >>> > Hi Maththias, >>> > >>> > Thanks a lot for your response!. >>> > >>> > Is there a specific version of libvirt from which xenserver support is >>> > added? I am getting the below error >>> > >>> > "error: invalid argument in libvirt was built without the 'xenapi' >>> > driver" >>> >>> The means that your libvirt version is new enough and contains the >>> XenAPI driver but that it was disabled on configure time, probably >>> because the build server didn't have libxenserver installed and >>> libvirt's configure script automatically disabled the driver because >>> of a missing dependency. >>> >>> > I have installed libvirt from citrix yum repo. >>> >>> Then Citrix build libvirt without XenAPI support. As a long term >>> solution you could report to whom ever is responsible for that repo >>> and request to enabled XenAPI support in that libvirt package. As a >>> short term solution you could build libvirt from source yourself and >>> make sure to get the XenAPI driver enabled. >>> >>> > I am using Xenserver 5.5 with libvirt 0.8.2 and it does not seem to be >>> > working. >>> >>> According to http://libvirt.org/hvsupport.html and the error message >>> 0.8.2 is new enough. >>> >>> Matthias >>> >>> > Thanks, >>> > >>> > Naresh >>> > >>> > On Jun 15, 2011 7:03 PM, "Matthias Bolte" >>> > <matthias.bolte(a)googlemail.com> >>> > wrote: >>> >> 2011/6/15 G Naresh Kumar <naresh.gadepalli(a)gmail.com>: >>> >>> Hi, >>> >>> Is libvirt supported on Citrix Xenserver. I have been searching for >>> >>> the >>> >>> same >>> >>> with little/no luck. >>> >>> If supported, can you point to some links/documents which can help me >>> >>> try >>> >>> out the same. >>> >>> Thanks, >>> >>> Naresh >>> >> >>> >> libvirt can use XenAPI via libxenserver [1]. That should allow you to >>> >> use libvirt with a Citrix XenServer. You can use virsh like this >>> >> assuming you have a libxenserver enabled libvirt: >>> >> >>> >> virsh -c xenapi://my-xen-server >>> >> >>> >> But it's true, there is no documentation about this on the libvirt >>> >> website >>> >> yet. >>> >> >>> >> [1] http://community.citrix.com/display/xs/Download+SDKs >>> >> >>> >> -- >>> >> Matthias Bolte >>> >> http://photron.blogspot.com >>> > >> -- >> I was an atheist till I realized I am GOD >> > >-- > Matthias Bolte >http://photron.blogspot.com > >   >-- >I was an atheist till I realized I am GOD >_______________________________________________ >libvirt-users mailing list >libvirt-users(a)redhat.com >https://www.redhat.com/mailman/listinfo/libvirt-users

13 years, 1 month

2
1
0 / 0

[libvirt-users] Is libvirt supported on Citrix Xenserver?

by G Naresh Kumar

Hi, Is libvirt supported on Citrix Xenserver. I have been searching for the same with little/no luck. If supported, can you point to some links/documents which can help me try out the same. Thanks, Naresh

13 years, 1 month

2
7
0 / 0

[libvirt-users] problem w/ libvirt-0.8.2-15.el5 and CentOS

by Jim Glennon

I am running the Eucalyptus 2.0 cloud computing platform on an up-to-date CentOS 5 using the xen hypervisor. While attempting to attach a volume successfully created using jclouds with eucalyptus to a running VM instance, I encountered the following error: libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) i also tried attaching manually (i.e. euca-atttach-volume) and experienced the same failure. i found this discussion which mentions a possible libvirt/xen problem: https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=662908 however it does not appear that the fix is available for public consumption (at least i couldn't find it). from the Eucalyptus nc.log: [Tue Jul 19 22:16:47 2011][005714][EUCAINFO ] doAttachVolume() invoked (id=i-4DA80924 vol=vol-59CF0630 remote=/dev/etherd/e0.12 local=/dev/sda2) [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] AttachVolume() failed (err=-1) XML= [Tue Jul 19 22:16:48 2011][005714][EUCAERROR ] ERROR: doAttachVolume() failed error=1

13 years, 1 month

1
0
0 / 0

[libvirt-users] Migrate failed

by zhang xintao

Dear All； I try to migrate a kvm guset os from Host A to Host B,but failed ================================================ Host OS : Ubuntu 11.04 server Using libvirt 0.8.8 Using API:QEMU 0.8.8 Running hypervisor:QEMU 0.14.0 =============================================== virsh migrate --live winxp quem+ssh://192.168.10.3/system root(a)192.168.10.3's password: error:operation failed:migration to 'tcp:Host B:49156' failed:migration failed =============================================== read libvirt.org FAQ,add --tunnelled FLAG ================================ virsh migrate --live --tunnelled winxp qume+ssh://192.168.10.3/system root(a)192.168.10.'s password: error: Requested operation is not vaild:cannot perform tunnelled migration without using peer2peer flag ================================================ add p2p flag ================================================ virsh migrate --live --tunnelled winxp qume+ssh://192.168.10.3/system root(a)192.168.10.'s password: error:operation failed:Failed to connect to remote libvirt URI quem+ssh://192.168.10.3/system who can help me ?

13 years, 1 month

1
0
0 / 0

[libvirt-users] cannot perform tunnelled migration without using peer2peer flag

by zhang xintao

Dear All I try to migration a kvm guest os to another host failed server: ubuntu 11.04 server virsh:migrate --live --tunnelled vm1 qemu+ssh://192.168.10.3/system error:Requested operation is not valid:cannot perform tunnelled migration without using peer2peer flag

13 years, 1 month

5
7
0 / 0

Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?

by sharmila radha krishnan

Hi,  I was finally able to connect to the xenapi hypervisor using virsh of libvirt 0.9.2.  However, once I connect to virsh and give a 'quit' command I get  "* glibc detected *** virsh: double free or corruption (fasttop):". Please find below the actual memory dump.   Note: I have disabled the SSL certificate verification in xenapi_driver.c by setting curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0) & curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0).     [root@sharmila libvirt-0.9.2]# virsh -c "xenapi://localhost" Enter username for localhost: root Enter root's password for localhost: Welcome to virsh, the virtualization interactive terminal.    Type:  'help' for help with commands        'quit' to quit    virsh # list --all  Id Name                 State ----------------------------------   0 Control domain on host: sharmila running   - Control domain on host: sharmila running   - XenServer SDK 5.6.100-47101p import shut off    virsh # quit    *** glibc detected *** virsh: double free or corruption (fasttop): 0x09fcc370 *** ======= Backtrace: ========= /lib/libc.so.6[0xb6fc56c5] /lib/libc.so.6(cfree+0x59)[0xb6fc5b09] /usr/local/lib/libvirt.so.0(virFree+0x42)[0xb760d712] /usr/local/lib/libvirt.so.0[0xb777031d] /usr/local/lib/libvirt.so.0[0xb776ec10] /usr/local/lib/libvirt.so.0[0xb7676017] /usr/local/lib/libvirt.so.0(virUnrefConnect+0x128)[0xb7677888] /usr/local/lib/libvirt.so.0(virConnectClose+0xda)[0xb769ad4a] virsh[0x8065c73] virsh[0x806672f] /lib/libc.so.6(__libc_start_main+0xdc)[0xb6f71e9c] virsh[0x804e0f1] ======= Memory map: ======== 08048000-08079000 r-xp 00000000 08:01 378273     /usr/local/bin/virsh 08079000-0807a000 rw-p 00031000 08:01 378273     /usr/local/bin/virsh 09fa1000-0a060000 rw-p 00000000 00:00 0          [heap] b6b61000-b6b6c000 r-xp 00000000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6c000-b6b6d000 rw-p 0000a000 08:01 182153     /lib/libgcc_s-4.1.2-20080825.so.1 b6b6d000-b6b77000 r-xp 00000000 08:01 181027     /lib/libnss_files-2.5.so b6b77000-b6b78000 r--p 00009000 08:01 181027     /lib/libnss_files-2.5.so b6b78000-b6b79000 rw-p 0000a000 08:01 181027     /lib/libnss_files-2.5.so b6b81000-b6b83000 rw-p 00000000 00:00 0 b6b83000-b6d83000 r--p 00000000 08:01 447132     /usr/lib/locale/locale-archive b6d83000-b6d86000 rw-p 00000000 00:00 0 b6d86000-b6d88000 r-xp 00000000 08:01 180820     /lib/libkeyutils-1.2.so b6d88000-b6d89000 rw-p 00001000 08:01 180820     /lib/libkeyutils-1.2.so b6d89000-b6d91000 r-xp 00000000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d91000-b6d92000 rw-p 00007000 08:01 377484     /usr/lib/libkrb5support.so.0.1 b6d92000-b6d99000 r-xp 00000000 08:01 182148     /lib/librt-2.5.so b6d99000-b6d9a000 r--p 00007000 08:01 182148     /lib/librt-2.5.so b6d9a000-b6d9b000 rw-p 00008000 08:01 182148     /lib/librt-2.5.so b6d9b000-b6dab000 r-xp 00000000 08:01 180816     /lib/libresolv-2.5.so b6dab000-b6dac000 r--p 0000f000 08:01 180816     /lib/libresolv-2.5.so b6dac000-b6dad000 rw-p 00010000 08:01 180816     /lib/libresolv-2.5.so b6dad000-b6daf000 rw-p 00000000 00:00 0 b6daf000-b6ddf000 r-xp 00000000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6ddf000-b6de0000 rw-p 0002f000 08:01 378111     /usr/lib/libidn.so.11.5.19 b6de0000-b6de1000 rw-p 00000000 00:00 0 b6de1000-b6de3000 r-xp 00000000 08:01 180823     /lib/libcom_err.so.2.1 b6de3000-b6de4000 rw-p 00001000 08:01 180823     /lib/libcom_err.so.2.1 b6de4000-b6e0a000 r-xp 00000000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0a000-b6e0b000 rw-p 00025000 08:01 378185     /usr/lib/libk5crypto.so.3.1 b6e0b000-b6e9f000 r-xp 00000000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6e9f000-b6ea2000 rw-p 00093000 08:01 378198     /usr/lib/libkrb5.so.3.3 b6ea2000-b6ece000 r-xp 00000000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ece000-b6ecf000 rw-p 0002c000 08:01 378160     /usr/lib/libgssapi_krb5.so.2.2 b6ecf000-b6ed2000 r-xp 00000000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed2000-b6ed3000 rw-p 00002000 08:01 377492     /usr/lib/libgpg-error.so.0.3.0 b6ed3000-b6ed4000 rw-p 00000000 00:00 0 b6ed4000-b6f0f000 r-xp 00000000 08:01 182149     /lib/libsepol.so.1 b6f0f000-b6f10000 rw-p 0003b000 08:01 182149     /lib/libsepol.so.1 b6f10000-b6f1a000 rw-p 00000000 00:00 0 b6f1a000-b6f5a000 r-xp 00000000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5a000-b6f5b000 rw-p 00040000 08:01 378242     /usr/local/lib/libcurl.so.4.1.0 b6f5b000-b6f5c000 rw-p 00000000 00:00 0 b6f5c000-b70af000 r-xp 00000000 08:01 180994     /lib/libc-2.5.so b70af000-b70b1000 r--p 00153000 08:01 180994     /lib/libc-2.5.so b70b1000-b70b2000 rw-p 00155000 08:01 180994     /lib/libc-2.5.so b70b2000-b70b5000 rw-p 00000000 00:00 0 b70b5000-b70b8000 r-xp 00000000 08:01 180979     /lib/libdl-2.5.so b70b8000-b70b9000 r--p 00002000 08:01 180979     /lib/libdl-2.5.so b70b9000-b70ba000 rw-p 00003000 08:01 180979     /lib/libdl-2.5.so b70ba000-b70e1000 r-xp 00000000 08:01 182017     /lib/libm-2.5.so b70e1000-b70e2000 r--p 00026000 08:01 182017     /lib/libm-2.5.so b70e2000-b70e3000 rw-p 00027000 08:01 182017     /lib/libm-2.5.so b70e3000-b70e4000 rw-p 00000000 00:00 0 b70e4000-b70f6000 r-xp 00000000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f6000-b70f7000 rw-p 00011000 08:01 378165     /usr/lib/libz.so.1.2.3 b70f7000-b7223000 r-xp 00000000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7223000-b7228000 rw-p 0012c000 08:01 378174     /usr/lib/libxml2.so.2.6.26 b7228000-b7229000 rw-p 00000000 00:00 0 b7229000-b723e000 r-xp 00000000 08:01 181033     /lib/libpthread-2.5.so b723e000-b723f000 r--p 00015000 08:01 181033     /lib/libpthread-2.5.so b723f000-b7240000 rw-p 00016000 08:01 181033     /lib/libpthread-2.5.so b7240000-b7242000 rw-p 00000000 00:00 0 b7242000-b7258000 r-xp 00000000 08:01 181005     /lib/libselinux.so.1 b7258000-b725a000 rw-p 00015000 08:01 181005     /lib/libselinux.so.1 b725a000-b7389000 r-xp 00000000 08:01 182129     /lib/libcrypto.so.0.9.8e b7389000-b739c000 rw-p 0012e000 08:01 182129     /lib/libcrypto.so.0.9.8e b739c000-b73a0000 rw-p 00000000 00:00 0 b73a0000-b73e4000 r-xp 00000000 08:01 180822     /lib/libssl.so.0.9.8e b73e4000-b73e8000 rw-p 00043000 08:01 180822     /lib/libssl.so.0.9.8e b73e8000-b7419000 r-xp 00000000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b7419000-b741a000 rw-p 00031000 08:01 383239     /usr/lib/libcurl.so.3.0.0 b741a000-b741b000 rw-p 00000000 00:00 0 b741b000-b747b000 r-xp 00000000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747b000-b747f000 rw-p 00060000 08:01 378267     /usr/lib/libxenserver.so.1.3 b747f000-b74a3000 r-xp 00000000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a3000-b74a4000 rw-p 00024000 08:01 383129     /usr/lib/libssh2.so.1.0.1 b74a4000-b74a8000 r-xp 00000000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a8000-b74a9000 rw-p 00003000 08:01 376977     /usr/lib/libxenstore.so.3.0.0 b74a9000-b74ac000 rw-p 00000000 00:00 0 b74ac000-b752a000 r-xp 00000000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752a000-b752d000 rw-p 0007d000 08:01 378181     /usr/lib/libgcrypt.so.11.5.2 b752d000-b75a6000 r-xp 00000000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75a6000-b75ac000 rw-p 00078000 08:01 380857     /usr/lib/libgnutls.so.13.0.6 b75ac000-b75ad000 rw-p 00000000 00:00 0 b75ad000-b75cc000 r-xp 00000000 08:01 180978     /lib/libdevmapper.so.1.02 b75cc000-b75ce000 rw-p 0001e000 08:01 180978     /lib/libdevmapper.so.1.02 b75cf000-b75d6000 r--s 00000000 08:01 412913     /usr/lib/gconv/gconv-modules.cache b75d6000-b75d7000 r-xp 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2 b75d7000-b75d8000 rw-p 00000000 08:01 377141     /usr/local/lib/libvirt-qemu.so.0.9.2Aborted    Moreover, Iam not able to start any VMs uisng xencenter after i have started using virsh. It says,  Error: Starting VM 'XenServer SDK 5.6.100-47101p import' - Internal error: another frontend device is already connected to this domain (frontend (domid=0 | kind=vbd | devid=51712); backend (domid=0 | kind=vbd | devid=51712)). Even a reboot of the machine didnt help.   Any pointers on the above 2 issues would be of great help.   Thanks in Advance!   Regards, SharmilaFrom: "G Naresh Kumar"naresh.gadepalli(a)gmail.comSent: Sat, 16 Jul 2011 16:55:16 +0530To: Matthias Bolte matthias.bolte(a)googlemail.comCc: libvirt-users(a)redhat.comSubject: Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?Hi Matthias, > Sorry for the confusion.It was an edited one & hence thetypo. Below is the actual output: # virsh -c xenapi://<myip> Enter username for <myip>: root Enter root's password for <myip>: error: authentication failed: (null) I was not able to get anything in the Xen logs. Somehowfigured out to print the Xen error using the patch given at the link http://osdir.com/ml/libvir- list/2011-06/msg00298.html. It prints"TRANSPORT_FAULT". Any pointers to this error would be much appreciated. Iam also trying to debugthis issue. As per your suggestion, I had used make rpm. But it requires xen-devel pacakge,which I was not able to get for Xen 3.4.2. Is there any way where I canuse the source package and build & install the library without using'make rpm' ? Thanks for all the help. > Regards Naresh> On Thu, Jul 14, 2011 at 7:07 PM, Matthias Bolte <matthias.bolte(a)googlemail.com> wrote:> 2011/7/14 G Naresh Kumar <naresh.gadepalli@gmail.com>:>> Hi Maththias,> > Thanks for the help. I finally was able to compile/install libvirt on>> xenserver.>>>> I tried compiling the libvirt 0.9.2 with xen api support. Was able to>> install it successfully. When I tried giving the virsh command, I got an>> ‘authentication failed’ error as shown below.>>>> # virsh -c xenapi://<my local ip>>> Enter username for <mylocalip>: root>>Here you entered root> >> Enter intel123's password for <my local ip>:>>but here it asks for intel123's, that's unexpected. Did you edit this>one before mailing it, or is there really this mismatch?>>> error: authentication failed: (null)>>Outputting (null) here is actually a bug. The only way this can happen>is when the login attempt fails but the XenServer doesn't provide an>error message. Maybe have a look at the XenServer logs to see if it>says something about a failed login attempt.> >> I also tried connecting to the local machine as below,>>>> virsh -c "xenapi:///">> error: authentication failed: Server name not in URI>> error: failed to connect to the hypervisor>>The XenAPI driver expects a server name. xenapi:/// _could_ be treated>as xenapi://localhost, but it's not implemented that way.> >> Also I am trying to install ruby-libvirt on xenserver, which looks like>> requires libvirt-devel package to be installed. How do I build it from the>> libvirt 0.9.2 source package.>>Running 'make rpm' should build an libvirt-devel RPM package for you.> >> Thanks,>>>> Naresh>>>> On Wed, Jun 15, 2011 at 8:19 PM, Matthias Bolte>> <matthias.bolte(a)googlemail.com> wrote:>>>>>> 2011/6/15 G Naresh Kumar <naresh.gadepalli@gmail.com>:>>> > Hi Maththias,>>> >>>> > Thanks a lot for your response!.>>> >>>> > Is there a specific version of libvirt from which xenserver support is>>> > added? I am getting the below error>>> >>>> > "error: invalid argument in libvirt was built without the 'xenapi'>>> > driver">>>>>> The means that your libvirt version is new enough and contains the>>> XenAPI driver but that it was disabled on configure time, probably>>> because the build server didn't have libxenserver installed and>>> libvirt's configure script automatically disabled the driver because>>> of a missing dependency.&g! t;>>>>> > I have installed libvirt from citrix yum repo.>>>>>> Then Citrix build libvirt without XenAPI support. As a long term>>> solution you could report to whom ever is responsible for that repo>>> and request to enabled XenAPI support in that libvirt package. As a>>> short term solution you could build libvirt from source yourself and>>> make sure to get the XenAPI driver enabled.>>>>>> > I am using Xenserver 5.5 with libvirt 0.8.2 and it does not seem to be>>> > working.>>>>>> According to http://libvirt.org/hvsupport.html and the error message>>> 0.8.2 is new enough.>>>>>> Matthias>>>>>> > Thanks,>>> >>>> > Naresh>>> >>>> > On Jun 15, 2011 7:03 PM, "Matthias Bolte">>> > <matthias.bolte(a)googlemail.com>>>> > wrote:>>&g! t; >> 2011/6/15 G Naresh Kumar <naresh.gadepalli@gmai! l.com>:>>> >>> Hi,>>> >>> Is libvirt supported on Citrix Xenserver. I have been searching for>>> >>> the>>> >>> same>>> >>> with little/no luck.>>> >>> If supported, can you point to some links/documents which can help me>>> >>> try>>> >>> out the same.>>> >>> Thanks,>>> >>> Naresh>>> >>>>> >> libvirt can use XenAPI via libxenserver [1]. That should allow you to>>> >> use libvirt with a Citrix XenServer. You can use virsh like this>>> >> assuming you have a libxenserver enabled libvirt:>>> >>>>> >> virsh -c xenapi://my-xen-server>>> >>>>> >> But it's true, there is no documentation about this on the libvirt>>> >> website>>> >> yet.>>> &gt! ;>>>> >> [1] http://community.citrix.com/display/xs/Download+SDKs>>> >>>>> >> -->>> >> Matthias Bolte>>> >> http://photron.blogspot.com>>> >>> -->> I was an atheist till I realized I am GOD>>>>--> Matthias Bolte>http://photron.blogspot.com>>>-- >I was an atheist till I realized I am GOD>_______________________________________________>libvirt-users mailing list>libvirt-users@redhat.com>https://www.redhat.com/mailman/listinfo/libvirt-users

13 years, 1 month

1
0
0 / 0

[libvirt-users] Migrate KVM Guest OS failed

by zhang xintao

Dear All I used Virsh live Migrate KVM Guest OS failed error: unable to set user and group to '104:106' on '/mnt/run2/N2-WINDOWS-XP-1':Invalid argument /mnt/run2/ is a directory of local nfs server another host using nfs client share this directory

13 years, 1 month

2
1
0 / 0

[libvirt-users] [libvirt] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.3 release

by Daniel P. Berrange

I am happy to announce a new release[1] of the libvirt Perl bindings, Sys::Virt 0.9.3 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.9.3.tar.gz Changes in this release - Add all new APIs in libvirt 0.9.3 - Requires libvirt >= 0.9.3 The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc. I am now caught up to main libvirt releases and intended to track each new release more promptly in the future. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

13 years, 1 month

1
0
0 / 0

[libvirt-users] Unable to start libvirtd 0.9.3 on Ubuntu 10.10

by Heath Petersen

I just built libvirt 0.9.3 on my Ubuntu 10.10 box. It appears to have built correctly. When I try "virsh -c qemu:///session list --all" I get the following: error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor After that, libvirtd isn't running as user heath as it did when I was using 0.9.2. When I run it with LIBVIRT_DEBUG=1 I get this: . . . 22:26:34.334: 8385: debug : remoteOpen:774 : Auto-spawn user daemon instance 22:26:34.334: 8385: debug : doRemoteOpen:487 : proceeding with name = qemu:///session 22:26:34.334: 8385: debug : doRemoteOpen:497 : Connecting with transport 1 22:26:34.378: 8385: debug : doRemoteOpen:544 : Proceeding with sockname @/home/heath/.libvirt/libvirt-sock 22:26:34.378: 8385: debug : virCommandRunAsync:1874 : About to run LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30 22:26:34.378: 8385: debug : virCommandRunAsync:1890 : Command result 0, with PID 8386 22:26:34.379: 8385: debug : virCommandRun:1711 : Result status 0, stdout: '(null)' stderr: '(null)' 22:26:55.430: 8385: debug : do_open:1059 : driver 7 remote returned ERROR 22:26:55.430: 8385: debug : virUnrefConnect:145 : unref connection 0x8451840 1 22:26:55.430: 8385: debug : virReleaseConnect:94 : release connection 0x8451840 error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor I then proceeded to try to start libvirtd manually with "LIBVIRT_DEBUG=1 LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30". I got a return code of 1 with the following output: 22:29:33.295: 8389: info : libvirt version: 0.9.3 22:29:33.295: 8389: debug : virInitialize:412 : register drivers 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x3745e0 name=Test 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Test as driver 0 22:29:33.295: 8389: debug : virRegisterNetworkDriver:584 : registering Test as network driver 0 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering Test as interface driver 0 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering Test as storage driver 0 22:29:33.295: 8389: debug : virRegisterDeviceMonitor:683 : registering Test as device driver 0 22:29:33.295: 8389: debug : virRegisterSecretDriver:716 : registering Test as secret driver 0 22:29:33.295: 8389: debug : virRegisterNWFilterDriver:749 : registering Test as network filter driver 0 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x374fa0 name=Xen 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Xen as driver 1 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375720 name=OPENVZ 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering OPENVZ as driver 2 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375920 name=VMWARE 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering VMWARE as driver 3 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375420 name=PHYP 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering PHYP as driver 4 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering PHYP as storage driver 1 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering PHYP as interface driver 1 22:29:33.324: 8389: debug : tryLoadOne:163 : Found VBoxXPCOMC.so in '/usr/lib/virtualbox' 22:29:33.324: 8389: debug : vboxRegister:94 : VBoxCGlueInit found API version: 4.0.10 (4000010) 22:29:33.324: 8389: debug : vboxRegister:121 : VirtualBox API version: 4.0 22:29:33.324: 8389: debug : virRegisterDriver:767 : driver=0x376920 name=VBOX 22:29:33.324: 8389: debug : virRegisterDriver:791 : registering VBOX as driver 5 22:29:33.324: 8389: debug : virRegisterNetworkDriver:584 : registering VBOX as network driver 1 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering VBOX as storage driver 2 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x376c20 name=ESX 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering ESX as driver 6 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering ESX as interface driver 2 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering ESX as network driver 2 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering ESX as storage driver 3 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering ESX as device driver 1 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering ESX as secret driver 1 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering ESX as network filter driver 1 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x374a00 name=remote 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering remote as driver 7 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering remote as network driver 3 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering remote as interface driver 3 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering remote as storage driver 4 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering remote as device driver 2 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering remote as secret driver 2 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering remote as network filter driver 2 Any idea why libvirtd won't run? -- ---------- If you want to send stuff to the bit bucket, email Phineas.Ferb(a)Kandre.com .

13 years, 2 months

2
1
0 / 0

[libvirt-users] Problem starting libvirtd 0.9.3 on Ubuntu

by Heath Petersen

I just built libvirt 0.9.3 from scratch on my Ubuntu 10.10 system. It appeared to build and install correctly. When running a command like 'virsh -c qemu:///session list --all', I get the following: error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor When looking into it, I realized libvirtd was not running as user heath after the command. Running it with LIBVIRT_DEBUG=1, I get: ... 22:26:34.334: 8385: debug : remoteOpen:774 : Auto-spawn user daemon instance 22:26:34.334: 8385: debug : doRemoteOpen:487 : proceeding with name = qemu:///session 22:26:34.334: 8385: debug : doRemoteOpen:497 : Connecting with transport 1 22:26:34.378: 8385: debug : doRemoteOpen:544 : Proceeding with sockname @/home/heath/.libvirt/libvirt-sock 22:26:34.378: 8385: debug : virCommandRunAsync:1874 : About to run LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30 22:26:34.378: 8385: debug : virCommandRunAsync:1890 : Command result 0, with PID 8386 22:26:34.379: 8385: debug : virCommandRun:1711 : Result status 0, stdout: '(null)' stderr: '(null)' 22:26:55.430: 8385: debug : do_open:1059 : driver 7 remote returned ERROR 22:26:55.430: 8385: debug : virUnrefConnect:145 : unref connection 0x8451840 1 22:26:55.430: 8385: debug : virReleaseConnect:94 : release connection 0x8451840 error: Failed to connect socket to '@/home/heath/.libvirt/libvirt-sock': Connection refused error: failed to connect to the hypervisor I then tried to start libvirtd manually with 'LIBVIRT_DEBUG=1 LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games HOME=/home/heath USER=heath LOGNAME=heath /usr/local/sbin/libvirtd --timeout=30', just like it appears virsh is trying to do. I get a return code of 1 with the following output: 22:29:33.295: 8389: info : libvirt version: 0.9.3 22:29:33.295: 8389: debug : virInitialize:412 : register drivers 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x3745e0 name=Test 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Test as driver 0 22:29:33.295: 8389: debug : virRegisterNetworkDriver:584 : registering Test as network driver 0 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering Test as interface driver 0 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering Test as storage driver 0 22:29:33.295: 8389: debug : virRegisterDeviceMonitor:683 : registering Test as device driver 0 22:29:33.295: 8389: debug : virRegisterSecretDriver:716 : registering Test as secret driver 0 22:29:33.295: 8389: debug : virRegisterNWFilterDriver:749 : registering Test as network filter driver 0 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x374fa0 name=Xen 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering Xen as driver 1 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375720 name=OPENVZ 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering OPENVZ as driver 2 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375920 name=VMWARE 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering VMWARE as driver 3 22:29:33.295: 8389: debug : virRegisterDriver:767 : driver=0x375420 name=PHYP 22:29:33.295: 8389: debug : virRegisterDriver:791 : registering PHYP as driver 4 22:29:33.295: 8389: debug : virRegisterStorageDriver:650 : registering PHYP as storage driver 1 22:29:33.295: 8389: debug : virRegisterInterfaceDriver:617 : registering PHYP as interface driver 1 22:29:33.324: 8389: debug : tryLoadOne:163 : Found VBoxXPCOMC.so in '/usr/lib/virtualbox' 22:29:33.324: 8389: debug : vboxRegister:94 : VBoxCGlueInit found API version: 4.0.10 (4000010) 22:29:33.324: 8389: debug : vboxRegister:121 : VirtualBox API version: 4.0 22:29:33.324: 8389: debug : virRegisterDriver:767 : driver=0x376920 name=VBOX 22:29:33.324: 8389: debug : virRegisterDriver:791 : registering VBOX as driver 5 22:29:33.324: 8389: debug : virRegisterNetworkDriver:584 : registering VBOX as network driver 1 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering VBOX as storage driver 2 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x376c20 name=ESX 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering ESX as driver 6 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering ESX as interface driver 2 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering ESX as network driver 2 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering ESX as storage driver 3 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering ESX as device driver 1 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering ESX as secret driver 1 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering ESX as network filter driver 1 22:29:33.325: 8389: debug : virRegisterDriver:767 : driver=0x374a00 name=remote 22:29:33.325: 8389: debug : virRegisterDriver:791 : registering remote as driver 7 22:29:33.325: 8389: debug : virRegisterNetworkDriver:584 : registering remote as network driver 3 22:29:33.325: 8389: debug : virRegisterInterfaceDriver:617 : registering remote as interface driver 3 22:29:33.325: 8389: debug : virRegisterStorageDriver:650 : registering remote as storage driver 4 22:29:33.325: 8389: debug : virRegisterDeviceMonitor:683 : registering remote as device driver 2 22:29:33.325: 8389: debug : virRegisterSecretDriver:716 : registering remote as secret driver 2 22:29:33.325: 8389: debug : virRegisterNWFilterDriver:749 : registering remote as network filter driver 2 Any ideas why libvirtd isn't starting? -- ---------- If you want to send stuff to the bit bucket, email Phineas.Ferb(a)Kandre.com .

13 years, 2 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Users July 2011