2:42 a.m.
I am playing with libvirt 1.1.1 (lxc)
when I was starting a LXC container, the process location of cgroup is pretty , just the
root directory
from the process. But I could tune the cgroup in a container as an user that logged, This
is not accepted...
I wonder how to restrict it with apparmor ,so one can not modify files in the cgroup fs,
e.g the cpus or mem,
if i restrict it with "deny /sys/fs/cgroup/** wrklx," in apparmor ,the
container woulld not start up .
"Permission denied", because that a process would mount the cgroup, it seems
done by libvirt_lxc,
Any way to restrict the cgroup in the container or just not mount cgroup in the container
??
Any help would be appreciated, thanks .
3:06 a.m.
On 08/26/2013 03:42 PM, 止语 wrote:
I am playing with libvirt 1.1.1 (lxc)
when I was starting a LXC container, the process location of cgroup is pretty , just
the root directory
from the process. But I could tune the cgroup in a container as an user that logged, This
is not accepted...
I wonder how to restrict it with apparmor ,so one can not modify files in the cgroup fs,
e.g the cpus or mem,
if i restrict it with "deny /sys/fs/cgroup/** wrklx," in apparmor ,the
container woulld not start up .
"Permission denied", because that a process would mount the cgroup, it seems
done by libvirt_lxc,
Any way to restrict the cgroup in the container or just not mount cgroup in the container
??
Any help would be appreciated, thanks .
The simplest way is to enable user namespace for libvirt.
the below is the configuration you should do to enable user namespace
[quote]
If you want to enable user namespace,set the idmap element. the uid and gid elements have
three attributes:
start
First user id in container.
target
The first user id in container will be mapped to this target user id in host.
count
How many users in container being allowed to map to host's user.
<idmap>
<uid start='0' target='1000' count='10'/>
<gid start='0' target='1000' count='10'/>
</idmap>
[/quote]
3:36 a.m.
New subject: [libvirt-users] 回复： How to deal with LXC cgroup access control withapparmor ?
thx, Gao feng,
If I do not want to disable the cgroup in container , is there any config file ? or do i
have to do something to the libvirt source code
to skip it ?
------------------ 原始邮件 ------------------
发件人: "Gao feng"<gaofeng(a)cn.fujitsu.com>;
发送时间: 2013年8月26日(星期一) 下午4:06
收件人: "止语"<zhongjj(a)foxmail.com>;
抄送: "libvirt-users"<libvirt-users(a)redhat.com>;
主题: Re: [libvirt-users] How to deal with LXC cgroup access control withapparmor ?
On 08/26/2013 03:42 PM, 止语 wrote:
I am playing with libvirt 1.1.1 (lxc)
when I was starting a LXC container, the process location of cgroup is pretty , just
the root directory
from the process. But I could tune the cgroup in a container as an user that logged, This
is not accepted...
I wonder how to restrict it with apparmor ,so one can not modify files in the cgroup fs,
e.g the cpus or mem,
if i restrict it with "deny /sys/fs/cgroup/** wrklx," in apparmor ,the
container woulld not start up .
"Permission denied", because that a process would mount the cgroup, it seems
done by libvirt_lxc,
Any way to restrict the cgroup in the container or just not mount cgroup in the container
??
Any help would be appreciated, thanks .
The simplest way is to enable user namespace for libvirt.
the below is the configuration you should do to enable user namespace
[quote]
If you want to enable user namespace,set the idmap element. the uid and gid elements have
three attributes:
start
First user id in container.
target
The first user id in container will be mapped to this target user id in host.
count
How many users in container being allowed to map to host's user.
<idmap>
<uid start='0' target='1000' count='10'/>
<gid start='0' target='1000' count='10'/>
</idmap>
[/quote]
4:07 a.m.
New subject: [libvirt-users] 回复： How to deal with LXC cgroup access control withapparmor ?
On 08/26/2013 04:36 PM, jj wrote:
thx, Gao feng,
If I do not want to disable the cgroup in container , is there any config file ? or do i
have to do something to the libvirt source code
to skip it ?
Sorry, I don't quite understand what's your request.
enable user namespace doesn't disable cgroup in container, it will make user
in container has no rights to change the setting of cgroup.
Thanks
4:17 a.m.
New subject: [libvirt-users] 回复： How to deal with LXC cgroup access control withapparmor ?
OOPS:
"If I do not want to disable the cgroup in container" ==> "If I do
want to disable the cgroup in container"
I meant if the user namespace not enabled in kernel ...
thx ,I will try user namespace later. I am not working on x86 and not suer wheather the
usernamespace is ok in the kernel I am going to use.
I would try to disable the cgroup in lxc first.
THX to Gao feng .
------------------
止语
------------------ Original ------------------
From: "Gao feng"<gaofeng(a)cn.fujitsu.com>;
Date: Mon, Aug 26, 2013 05:07 PM
To: "jj"<jj(a)yuzao.org>;
Cc: "libvirt-users"<libvirt-users(a)redhat.com>;
Subject: Re: [libvirt-users]回复： How to deal with LXC cgroup access control withapparmor
?
On 08/26/2013 04:36 PM, jj wrote:
thx, Gao feng,
If I do not want to disable the cgroup in container , is there any config file ? or do i
have to do something to the libvirt source code
to skip it ?
Sorry, I don't quite understand what's your request.
enable user namespace doesn't disable cgroup in container, it will make user
in container has no rights to change the setting of cgroup.
Thanks
_______________________________________________
libvirt-users mailing list
libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
..
9:24 p.m.
New subject: [libvirt-users] 回复： 回复： How to deal with LXC cgroup access control withapparmor ?
Hi, I disabled the cgoroup mount in container and used apparmor to restrict the mounting
of cgroup.
it works.
I will try the user namespace laster with a new kernel. thx Gao feng .
------------------
:)
------------------ 原始邮件 ------------------
发件人: "止语"<zhongjj(a)foxmail.com>;
发送时间: 2013年8月26日(星期一) 下午5:17
收件人: "Gao feng"<gaofeng(a)cn.fujitsu.com>;
抄送: "libvirt-users"<libvirt-users(a)redhat.com>;
主题: Re: [libvirt-users]回复： How to deal with LXC cgroup access control withapparmor ?
OOPS:
"If I do not want to disable the cgroup in container" ==> "If I do
want to disable the cgroup in container"
I meant if the user namespace not enabled in kernel ...
thx ,I will try user namespace later. I am not working on x86 and not suer wheather the
usernamespace is ok in the kernel I am going to use.
I would try to disable the cgroup in lxc first.
THX to Gao feng .
------------------
止语
------------------ Original ------------------
From: "Gao feng"<gaofeng(a)cn.fujitsu.com>;
Date: Mon, Aug 26, 2013 05:07 PM
To: "jj"<jj(a)yuzao.org>;
Cc: "libvirt-users"<libvirt-users(a)redhat.com>;
Subject: Re: [libvirt-users]回复： How to deal with LXC cgroup access control withapparmor
?
On 08/26/2013 04:36 PM, jj wrote:
thx, Gao feng,
If I do not want to disable the cgroup in container , is there any config file ? or do i
have to do something to the libvirt source code
to skip it ?
Sorry, I don't quite understand what's your request.
enable user namespace doesn't disable cgroup in container, it will make user
in container has no rights to change the setting of cgroup.
Thanks
_______________________________________________
libvirt-users mailing list
libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
..
4135
days inactive
4136
days old
5 comments
4 participants
participants (4)
-
Gao feng -
jj -
zhongjj -
止语