1:15 p.m.
I looked around but could not find any info on how to expand a libvirt managed LVM storage
pool. I do not see any virsh command to do it
but I was successful using the vgexpand command to add some more storage once I destroyed
the pools and then restarted it.
I'd like to verify that this is the proper way to grow the storage in a libvirt LVM
storage pool. And this brings up a second
question, I did this without any VM running so I'd like to know what the impact of
destroying a running pool is on running VMs.
Does taking the pool off-line cause any issues with running VMs or is the only affect that
the pool is unavailable for management by libvirt?
These are the commands that I ran to create my pool and expand it after a kickstart of the
server:
pvcreate -ff -y /dev/mapper/mpath?
virsh pool-define-as --name GuestVols --type logical --source-dev /dev/mapper/mpatha
--target /dev/GuestVols
virsh pool-build GuestVols
virsh pool-start GuestVols
virsh pool-autostart GuestVols
virsh pool-destroy --pool GuestVols
vgextend GuestVols /dev/mapper/mpath{b..d}
vgdisplay GuestVols
virsh pool-start --pool GuestVols
virsh pool-info --pool GuestVols
Is this the best way to create a managed pool across 4 LUNs? And to potentially expand the
storage group in the future if more storage is needed?
--jim
12:22 p.m.
Resending since no one replied over the weekend...
--jim
-----Original Message-----
From: libvirt-users-bounces(a)redhat.com [mailto:libvirt-users-
bounces(a)redhat.com] On Behalf Of McEvoy, James
Sent: Friday, September 20, 2013 11:16 AM
To: libvirt-users(a)redhat.com
Subject: [libvirt-users] Expanding an LVM Storage Pool
I looked around but could not find any info on how to expand a libvirt
managed LVM storage pool. I do not see any virsh command to do it
but I was successful using the vgexpand command to add some more storage
once I destroyed the pools and then restarted it.
I'd like to verify that this is the proper way to grow the storage in a libvirt LVM
storage pool. And this brings up a second
question, I did this without any VM running so I'd like to know what the impact
of destroying a running pool is on running VMs.
Does taking the pool off-line cause any issues with running VMs or is the only
affect that the pool is unavailable for management by libvirt?
These are the commands that I ran to create my pool and expand it after a
kickstart of the server:
pvcreate -ff -y /dev/mapper/mpath?
virsh pool-define-as --name GuestVols --type logical --source-dev
/dev/mapper/mpatha --target /dev/GuestVols
virsh pool-build GuestVols
virsh pool-start GuestVols
virsh pool-autostart GuestVols
virsh pool-destroy --pool GuestVols
vgextend GuestVols /dev/mapper/mpath{b..d}
vgdisplay GuestVols
virsh pool-start --pool GuestVols
virsh pool-info --pool GuestVols
Is this the best way to create a managed pool across 4 LUNs? And to potentially
expand the storage group in the future if more storage is needed?
--jim
_______________________________________________
libvirt-users mailing list
libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
1:45 a.m.
On 21/09/13 02:15, McEvoy, James wrote:
I looked around but could not find any info on how to expand a
libvirt managed LVM storage pool. I do not see any virsh command to do it
but I was successful using the vgexpand command to add some more storage once I destroyed
the pools and then restarted it.
I'd like to verify that this is the proper way to grow the storage in a libvirt LVM
storage pool.
It's not the proper way in principle, but since libvirt doesn't support
to extend
the volume groups for a logical pool yet, it's the only way now. One
hint though,
you can try to refresh the pool by command "virsh pool-refresh" after
the volume
group of the pool is extended. I.e, don't have to restart the pool.
And this brings up a second
question, I did this without any VM running so I'd like to know what the impact of
destroying a running pool is on running VMs.
If you have any VM which uses the pool's volume, it affects, especially
if you
are using the volume with pool and volume name in domain config. e.g.
<source pool="$pool" volume="$volume"/>
Does taking the pool off-line cause any issues with running VMs or is the only affect
that the pool is unavailable for management by libvirt?
Same as above. It's one of the thing in our TODO list : we probaly need
to prevent
destroying the pool if any its volume is being used by any VM,
especially if the volume
is used with pool and volume name in domain config.
These are the commands that I ran to create my pool and expand it after a kickstart of
the server:
pvcreate -ff -y /dev/mapper/mpath?
virsh pool-define-as --name GuestVols --type logical --source-dev /dev/mapper/mpatha
--target /dev/GuestVols
virsh pool-build GuestVols
virsh pool-start GuestVols
virsh pool-autostart GuestVols
virsh pool-destroy --pool GuestVols
vgextend GuestVols /dev/mapper/mpath{b..d}
vgdisplay GuestVols
virsh pool-start --pool GuestVols
virsh pool-info --pool GuestVols
Is this the best way to create a managed pool across 4 LUNs? And to potentially expand
the storage group in the future if more storage is needed?
--jim
_______________________________________________
libvirt-users mailing list
libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
4058
days inactive
4062
days old
2 comments
2 participants
participants (2)
-
McEvoy, James -
Osier Yang