topology : two guest connected to physical LAN (vlan 620 and vlan 621) on host : 1) creating bridge br0 2) creating bridge for guest 1 and guest 2 - to separate traffic 3) virtual network1 : I have default NAT 192.168.122.x DHCP feeding IP to eth1 4) virtual network2 : I want to use 192.168.0.0 for eth0 my question is what would be my virtual network2 looks like : following is default xml : <network> <name>default</name> <uuid>8778244b-1a0c-c15f-c348-26462a07a639</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:3E:19:B3'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> </dhcp> </ip> </network> in virtmanager I assign this default to NIC1 and gets IP in range 192.168.122.x I want to define another network and assign to NIC2 so I can get IP in range 192.168.0.x my guest are on interface em2.620, em2.621 etc thanks