3:52 a.m.
Hi,
I'm using LVM based storage pools and I'm wondering
if there is a way to specify several source-dev on the command line
for creating a volume group spread over several devices :
one device /dev/sdc1 is ok:
* virsh pool-define-as --name lvmpool --type logical --source-dev /dev/sdc1 --source-name
vg --target /dev/vg
I would like something like (but sadly doesn't work):
? virsh pool-define-as --name lvmpool --type logical --source-dev /dev/sdc1 --source-dev
/dev/sdb1 --source-name vg --target /dev/vg ?
Best regards,
Matt
4:06 a.m.
----- Original Message -----
| From: "Matthieu Simonin" <matthieu.simonin(a)inria.fr>
| To: libvirt-users(a)redhat.com
| Sent: Tuesday, November 19, 2013 3:22:56 PM
| Subject: [libvirt-users] virsh and multi source-dev
|
| Hi,
|
| I'm using LVM based storage pools and I'm wondering
| if there is a way to specify several source-dev on the command line
| for creating a volume group spread over several devices :
|
| one device /dev/sdc1 is ok:
| * virsh pool-define-as --name lvmpool --type logical --source-dev /dev/sdc1
| --source-name vg --target /dev/vg
|
| I would like something like (but sadly doesn't work):
| ? virsh pool-define-as --name lvmpool --type logical --source-dev /dev/sdc1
| --source-dev /dev/sdb1 --source-name vg --target /dev/vg ?
|
|
Can you define a pool xml as shown below and define it from there ?
ex:
<pool type="logical">
<name>HostVG</name>
<source>
<device path="/dev/sda1"/>
<device path="/dev/sdb1"/>
<device path="/dev/sdc1"/>
</source>
<target>
<path>/dev/HostVG</path>
</target>
</pool>
--Humble
|
| _______________________________________________
| libvirt-users mailing list
| libvirt-users(a)redhat.com
| https://www.redhat.com/mailman/listinfo/libvirt-users
|
4:16 a.m.
Thank you for answering.
Yes sure I can from an xml,
But is it possible from the command line with define-pool-as ?
Best,
Matt
----- Mail original -----
De: "Humble Chirammal" <hchiramm(a)redhat.com>
À: "Matthieu Simonin" <matthieu.simonin(a)inria.fr>
Cc: libvirt-users(a)redhat.com
Envoyé: Mardi 19 Novembre 2013 11:06:35
Objet: Re: [libvirt-users] virsh and multi source-dev
----- Original Message -----
| From: "Matthieu Simonin" <matthieu.simonin(a)inria.fr>
| To: libvirt-users(a)redhat.com
| Sent: Tuesday, November 19, 2013 3:22:56 PM
| Subject: [libvirt-users] virsh and multi source-dev
|
| Hi,
|
| I'm using LVM based storage pools and I'm wondering
| if there is a way to specify several source-dev on the command line
| for creating a volume group spread over several devices :
|
| one device /dev/sdc1 is ok:
| * virsh pool-define-as --name lvmpool --type logical --source-dev
| /dev/sdc1
| --source-name vg --target /dev/vg
|
| I would like something like (but sadly doesn't work):
| ? virsh pool-define-as --name lvmpool --type logical --source-dev
| /dev/sdc1
| --source-dev /dev/sdb1 --source-name vg --target /dev/vg ?
|
|
Can you define a pool xml as shown below and define it from there ?
ex:
<pool type="logical">
<name>HostVG</name>
<source>
<device path="/dev/sda1"/>
<device path="/dev/sdb1"/>
<device path="/dev/sdc1"/>
</source>
<target>
<path>/dev/HostVG</path>
</target>
</pool>
--Humble
|
| _______________________________________________
| libvirt-users mailing list
| libvirt-users(a)redhat.com
| https://www.redhat.com/mailman/listinfo/libvirt-users
|
7:41 a.m.
On 11/19/2013 03:16 AM, Matthieu Simonin wrote:
Thank you for answering.
[Please don't top-post on technical lists]
Yes sure I can from an xml,
But is it possible from the command line with define-pool-as ?
There are a few places where define-pool-as is still not as powerful as
using full XML; but you are welcome to write a patch to improve its
behavior.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
2:12 a.m.
Thank you all for answering.
Best Regards,
Matt
----- Mail original -----
De: "Eric Blake" <eblake(a)redhat.com>
À: "Matthieu Simonin" <matthieu.simonin(a)inria.fr>, "Humble
Chirammal" <hchiramm(a)redhat.com>
Cc: libvirt-users(a)redhat.com
Envoyé: Mardi 19 Novembre 2013 14:41:02
Objet: Re: [libvirt-users] virsh and multi source-dev
On 11/19/2013 03:16 AM, Matthieu Simonin wrote:
> Thank you for answering.
[Please don't top-post on technical lists]
>
> Yes sure I can from an xml,
> But is it possible from the command line with define-pool-as ?
There are a few places where define-pool-as is still not as powerful
as
using full XML; but you are welcome to write a patch to improve its
behavior.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
4054
days inactive
4055
days old
4 comments
3 participants
participants (3)
-
Eric Blake -
Humble Chirammal -
Matthieu Simonin