8:55 a.m.
Hi,
I've just tried to do a fresh checkout (git clone) with libvirt sources tree
and had no luck because it seems to be inaccessible/non-existent at all. Is
this temporary situation or I have to only use git:// proto?
I'm asking because I'm sitting behind rather restrictive corporate proxy
which does not allow anything but a little set of protocols such as HTTP(S).
Thanks.
1:26 a.m.
于 2011年01月20日 22:55, Fyodor Kupchik 写道:
Hi,
I've just tried to do a fresh checkout (git clone) with libvirt sources
tree and had no luck because it seems to be inaccessible/non-existent at
all. Is this temporary situation or I have to only use git:// proto?
I'm asking because I'm sitting behind rather restrictive corporate proxy
which does not allow anything but a little set of protocols such as HTTP(S).
http://libvirt.org/downloads.html
Regards
Osier
2:15 a.m.
On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
Hi,
I've just tried to do a fresh checkout (git clone) with libvirt sources tree and had
no luck because it seems to be inaccessible/non-existent at all. Is this temporary
situation or I have to only use git:// proto?
I'm asking because I'm sitting behind rather restrictive corporate proxy which
does not allow anything but a little set of protocols such as HTTP(S).
Just checked the server setup here, and it doesn't look like there's any way other
than git://. Not even http://.
Sorry. :(
2:25 a.m.
On 21/01/2011, at 7:15 PM, Justin Clift wrote:
On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
> Hi,
>
> I've just tried to do a fresh checkout (git clone) with libvirt sources tree and
had no luck because it seems to be inaccessible/non-existent at all. Is this temporary
situation or I have to only use git:// proto?
> I'm asking because I'm sitting behind rather restrictive corporate proxy
which does not allow anything but a little set of protocols such as HTTP(S).
Just checked the server setup here, and it doesn't look like there's any way
other than git://. Not even http://.
Sorry. :(
Oh, there is one other possibility, briefly mentioned on the downloads page Osier pointed
you to.
Depending upon what you're needs are, the hourly source code snapshot (tarball) might
work for you:
http://libvir.org/sources/libvirt-git-snapshot.tar.gz
But, if you really do need the proper git repo cloned, that's going to be tricky. :(
2:32 a.m.
On Fri, Jan 21, 2011 at 07:25:06PM +1100, Justin Clift wrote:
On 21/01/2011, at 7:15 PM, Justin Clift wrote:
> On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
>> Hi,
>>
>> I've just tried to do a fresh checkout (git clone) with libvirt sources tree
and had no luck because it seems to be inaccessible/non-existent at all. Is this temporary
situation or I have to only use git:// proto?
>> I'm asking because I'm sitting behind rather restrictive corporate proxy
which does not allow anything but a little set of protocols such as HTTP(S).
>
> Just checked the server setup here, and it doesn't look like there's any way
other than git://. Not even http://.
>
> Sorry. :(
Oh, there is one other possibility, briefly mentioned on the downloads page Osier pointed
you to.
Last possibility use the gitorious clone repo, it seems available via http
http://www.gitorious.net/libvirt?page=3
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
2:39 a.m.
On 21/01/2011, at 7:32 PM, Daniel Veillard wrote:
On Fri, Jan 21, 2011 at 07:25:06PM +1100, Justin Clift wrote:
> On 21/01/2011, at 7:15 PM, Justin Clift wrote:
>> On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
>>> Hi,
>>>
>>> I've just tried to do a fresh checkout (git clone) with libvirt sources
tree and had no luck because it seems to be inaccessible/non-existent at all. Is this
temporary situation or I have to only use git:// proto?
>>> I'm asking because I'm sitting behind rather restrictive corporate
proxy which does not allow anything but a little set of protocols such as HTTP(S).
>>
>> Just checked the server setup here, and it doesn't look like there's any
way other than git://. Not even http://.
>>
>> Sorry. :(
>
> Oh, there is one other possibility, briefly mentioned on the downloads page Osier
pointed you to.
Last possibility use the gitorious clone repo, it seems available via http
http://www.gitorious.net/libvirt?page=3
Interesting. That one looks workable.
3:44 a.m.
I've had to use the hourly snapshot because I also cannot get to the git
protocol. How is the gitorious clone repo kept in sync? Is this native git
functionality (sync repos) or is it some special sauce on top of that?
-jb
On Fri, Jan 21, 2011 at 3:39 AM, Justin Clift <jclift(a)redhat.com> wrote:
On 21/01/2011, at 7:32 PM, Daniel Veillard wrote:
> On Fri, Jan 21, 2011 at 07:25:06PM +1100, Justin Clift wrote:
>> On 21/01/2011, at 7:15 PM, Justin Clift wrote:
>>> On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
>>>> Hi,
>>>>
>>>> I've just tried to do a fresh checkout (git clone) with libvirt
sources tree and had no luck because it seems to be
inaccessible/non-existent at all. Is this temporary situation or I have to
only use git:// proto?
>>>> I'm asking because I'm sitting behind rather restrictive
corporate
proxy which does not allow anything but a little set of protocols such as
HTTP(S).
>>>
>>> Just checked the server setup here, and it doesn't look like
there's
any way other than git://. Not even http://.
>>>
>>> Sorry. :(
>>
>> Oh, there is one other possibility, briefly mentioned on the downloads
page Osier pointed you to.
>
> Last possibility use the gitorious clone repo, it seems available via
http
> http://www.gitorious.net/libvirt?page=3
Interesting. That one looks workable.
_______________________________________________
libvirt-users mailing list
libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
10:52 a.m.
thank you, guys for quick replies and suggestions but I still can't access
repo on gitorius with the HTTP 403 error
HTTPS didn't work as well with"operation now in progress" error
do I need any special creds for anonymous access?
2011/1/21 James Barkley <james.barkley(a)gmail.com>
I've had to use the hourly snapshot because I also cannot get to
the git
protocol. How is the gitorious clone repo kept in sync? Is this native git
functionality (sync repos) or is it some special sauce on top of that?
-jb
On Fri, Jan 21, 2011 at 3:39 AM, Justin Clift <jclift(a)redhat.com> wrote:
> On 21/01/2011, at 7:32 PM, Daniel Veillard wrote:
> > On Fri, Jan 21, 2011 at 07:25:06PM +1100, Justin Clift wrote:
> >> On 21/01/2011, at 7:15 PM, Justin Clift wrote:
> >>> On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
> >>>> Hi,
> >>>>
> >>>> I've just tried to do a fresh checkout (git clone) with libvirt
> sources tree and had no luck because it seems to be
> inaccessible/non-existent at all. Is this temporary situation or I have to
> only use git:// proto?
> >>>> I'm asking because I'm sitting behind rather restrictive
corporate
> proxy which does not allow anything but a little set of protocols such as
> HTTP(S).
> >>>
> >>> Just checked the server setup here, and it doesn't look like
there's
> any way other than git://. Not even http://.
> >>>
> >>> Sorry. :(
> >>
> >> Oh, there is one other possibility, briefly mentioned on the downloads
> page Osier pointed you to.
> >
> > Last possibility use the gitorious clone repo, it seems available via
> http
> > http://www.gitorious.net/libvirt?page=3
>
> Interesting. That one looks workable.
>
> _______________________________________________
> libvirt-users mailing list
> libvirt-users(a)redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-users
>
2:55 p.m.
On 22/01/2011, at 3:52 AM, Fyodor Kupchik wrote:
thank you, guys for quick replies and suggestions but I still can't access repo on
gitorius with the HTTP 403 error
HTTPS didn't work as well with"operation now in
progress" error
do I need any special creds for anonymous access?
2011/1/21 James Barkley <james.barkley(a)gmail.com>
I've had to use the hourly snapshot because I also cannot get to the git protocol.
How is the gitorious clone repo kept in sync? Is this native git functionality (sync
repos) or is it some special sauce on top of that?
-jb
Yeah, it's definitely not working here for me either. The clone operation is just
hanging for me:
$ git clone http://git.gitorious.org/libvirt/libvirt.git
Cloning into libvirt...
(and that's it. Left it running for 1/2 hour, no change)
I don't have a gitorious account either, so will get a free one and see if that
helps.
6:28 p.m.
On 22/01/2011, at 7:55 AM, Justin Clift wrote:
On 22/01/2011, at 3:52 AM, Fyodor Kupchik wrote:
thank you, guys for quick replies and suggestions but I still can't access repo on
gitorius with the HTTP 403 error
> HTTPS didn't work as well with"operation now in progress" error
>
> do I need any special creds for anonymous access?
>
>
> 2011/1/21 James Barkley <james.barkley(a)gmail.com>
> I've had to use the hourly snapshot because I also cannot get to the git
protocol. How is the gitorious clone repo kept in sync? Is this native git functionality
(sync repos) or is it some special sauce on top of that?
>
> -jb
Yeah, it's definitely not working here for me either. The clone operation is just
hanging for me:
$ git clone http://git.gitorious.org/libvirt/libvirt.git
Cloning into libvirt...
(and that's it. Left it running for 1/2 hour, no change)
I don't have a gitorious account either, so will get a free one and see if that
helps.
Something seems to be wrong with the gitorius end of things:
$ git clone git://gitorious.org/libvirt/libvirt.git
Cloning into libvirt...
remote: Counting objects: 51387, done.
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
$
Using a browser to go to the http:// URL above from before just gives a "Not
Found" error too. I'll email them and see if they have any idea of what's
wrong.
6:06 a.m.
I can make a checkout from https://github.org and there exist several repos
with the libvirt sources but I don't know if I can safely use them.
Unfortunately I can't use snapshot since I'm using scripted installation
procedure. Yes, I can rewrite the script but it is not convenient to me
because I want to automate update and compilation of sources and maintaining
the patches for the bootstrap script looks painful to me.
Can anyone from the official team create a repo on github server and
configure mirroring the sources tree? Of course the best way it to have
HTTPS on the official libvirt.org site.
2011/1/22 Justin Clift <jclift(a)redhat.com>
On 22/01/2011, at 7:55 AM, Justin Clift wrote:
> On 22/01/2011, at 3:52 AM, Fyodor Kupchik wrote:
> thank you, guys for quick replies and suggestions but I still can't
access repo on gitorius with the HTTP 403 error
>> HTTPS didn't work as well with"operation now in progress" error
>>
>> do I need any special creds for anonymous access?
>>
>>
>> 2011/1/21 James Barkley <james.barkley(a)gmail.com>
>> I've had to use the hourly snapshot because I also cannot get to the git
protocol. How is the gitorious clone repo kept in sync? Is this native git
functionality (sync repos) or is it some special sauce on top of that?
>>
>> -jb
>
> Yeah, it's definitely not working here for me either. The clone
operation is just hanging for me:
>
> $ git clone http://git.gitorious.org/libvirt/libvirt.git
> Cloning into libvirt...
> (and that's it. Left it running for 1/2 hour, no change)
>
> I don't have a gitorious account either, so will get a free one and see
if that helps.
Something seems to be wrong with the gitorius end of things:
$ git clone git://gitorious.org/libvirt/libvirt.git
Cloning into libvirt...
remote: Counting objects: 51387, done.
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
$
Using a browser to go to the http:// URL above from before just gives a
"Not Found" error too. I'll email them and see if they have any idea of
what's wrong.
6:33 a.m.
On 24/01/2011, at 11:06 PM, Fyodor Kupchik wrote:
I can make a checkout from https://github.org and there exist several
repos with the libvirt sources but I don't know if I can safely use them.
Unfortunately I can't use snapshot since I'm using scripted installation
procedure. Yes, I can rewrite the script but it is not convenient to me because I want to
automate update and compilation of sources and maintaining the patches for the bootstrap
script looks painful to me.
Can anyone from the official team create a repo on github server and configure mirroring
the sources tree? Of course the best way it to have HTTPS on the official libvirt.org
site.
Hey Daniel, where is the git mirroring to gitorious done?
Is it a script or something that pushes from the libvirt.org servers, or something that
pulls from gitorious, or something else?
Was thinking of setting up an equivalent for GitHub, as gitorious has problems with
http:// and https:// access.
Regards and best wishes,
Justin Clift
6:42 a.m.
On Mon, Jan 24, 2011 at 11:33:28PM +1100, Justin Clift wrote:
On 24/01/2011, at 11:06 PM, Fyodor Kupchik wrote:
> I can make a checkout from https://github.org and there exist several repos with the
libvirt sources but I don't know if I can safely use them.
>
> Unfortunately I can't use snapshot since I'm using scripted installation
procedure. Yes, I can rewrite the script but it is not convenient to me because I want to
automate update and compilation of sources and maintaining the patches for the bootstrap
script looks painful to me.
>
> Can anyone from the official team create a repo on github server and configure
mirroring the sources tree? Of course the best way it to have HTTPS on the official
libvirt.org site.
Hey Daniel, where is the git mirroring to gitorious done?
Is it a script or something that pushes from the libvirt.org servers, or something that
pulls from gitorious, or something else?
Was thinking of setting up an equivalent for GitHub, as
gitorious has problems with http:// and https:// access.
Err, http:// access works fine with gitorious. I think
you simply didn't wait long enough. GIT's HTTP access
mechanism is seriously inefficient, and doesn't appear
to give you ongoing progress feedback like the git://
protocol, so expect to wait a while. I've verified I
can clone the main GIT repo over http in about 2 minutes
using:
git clone http://git.gitorious.org/libvirt/libvirt.git
Regards,
Daniel
7:20 a.m.
still no luck with it :(
I precede git command by proxychains one since git does not respect any kind
of proxy settings (nor system wide or those I set via git config http.proxy)
and it only works in such way.
==============================================================================
ProxyChains-3.1 (http://proxychains.sf.net)
Initialized empty Git repository in
/home/teo/prj/archipel/Archipel/Libvirt/.gnulib/.git/
git.sv.gnu.org[0: 140.186.70.72]: errno=Connection refused
fatal: unable to connect a socket (Connection refused)
Clone of 'git://git.sv.gnu.org/gnulib.git' into submodule path '.gnulib'
failed
Failed to recurse into submodule path 'Libvirt'
Unable to initialize submodules
==============================================================================
I suspect it still tries to use git proto somehow...
here's the output from another libvirt repo
==============================================================================
time proxychains git clone https://github.com/marcusk/libvirt.git
ProxyChains-3.1 (http://proxychains.sf.net)
Initialized empty Git repository in /home/teo/prj/libvirt/.git/
remote: Counting objects: 50464, done.
remote: Compressing objects: 100% (8268/8268), done.
remote: Total 50464 (delta 42261), reused 50257 (delta 42058)
Receiving objects: 100% (50464/50464), 51.74 MiB | 177 KiB/s, done.
Resolving deltas: 100% (42261/42261), done.
real 7m42.509s
user 0m13.210s
sys 0m1.140s
==============================================================================
2011/1/24 Daniel P. Berrange <berrange(a)redhat.com>
On Mon, Jan 24, 2011 at 11:33:28PM +1100, Justin Clift wrote:
> On 24/01/2011, at 11:06 PM, Fyodor Kupchik wrote:
> > I can make a checkout from https://github.org and there exist several
repos with the libvirt sources but I don't know if I can safely use them.
> >
> > Unfortunately I can't use snapshot since I'm using scripted
installation procedure. Yes, I can rewrite the script but it is not
convenient to me because I want to automate update and compilation of
sources and maintaining the patches for the bootstrap script looks painful
to me.
> >
> > Can anyone from the official team create a repo on github server and
configure mirroring the sources tree? Of course the best way it to have
HTTPS on the official libvirt.org site.
>
> Hey Daniel, where is the git mirroring to gitorious done?
>
> Is it a script or something that pushes from the libvirt.org servers, or
something that pulls from gitorious, or something else?
>
> Was thinking of setting up an equivalent for GitHub, as
> gitorious has problems with http:// and https:// access.
Err, http:// access works fine with gitorious. I think
you simply didn't wait long enough. GIT's HTTP access
mechanism is seriously inefficient, and doesn't appear
to give you ongoing progress feedback like the git://
protocol, so expect to wait a while. I've verified I
can clone the main GIT repo over http in about 2 minutes
using:
git clone http://git.gitorious.org/libvirt/libvirt.git
Regards,
Daniel
7:29 a.m.
On Mon, Jan 24, 2011 at 03:20:47PM +0200, Fyodor Kupchik wrote:
still no luck with it :(
I precede git command by proxychains one since git does not respect any kind
of proxy settings (nor system wide or those I set via git config http.proxy)
and it only works in such way.
==============================================================================
ProxyChains-3.1 (http://proxychains.sf.net)
Initialized empty Git repository in
/home/teo/prj/archipel/Archipel/Libvirt/.gnulib/.git/
git.sv.gnu.org[0: 140.186.70.72]: errno=Connection refused
fatal: unable to connect a socket (Connection refused)
Clone of 'git://git.sv.gnu.org/gnulib.git' into submodule path '.gnulib'
failed
Failed to recurse into submodule path 'Libvirt'
Unable to initialize submodules
This shows that the initial libvirt checkover over HTTP worked
fine. What in fact failed was the attempt to checkout the
GNULIB submodule, which is still using git:// protocol. I don't
believe there is any way to change the protocol used for submodules
during initial checkout.
Regards,
Daniel
8:27 a.m.
On 24/01/2011, at 11:42 PM, Daniel P. Berrange wrote:
<snip>
Err, http:// access works fine with gitorious. I think
you simply didn't wait long enough. GIT's HTTP access
mechanism is seriously inefficient, and doesn't appear
to give you ongoing progress feedback like the git://
protocol, so expect to wait a while. I've verified I
can clone the main GIT repo over http in about 2 minutes
using:
git clone http://git.gitorious.org/libvirt/libvirt.git
Thanks Daniel. Tried http again (first time today) and this
time it worked:
$ time git clone http://git.gitorious.org/libvirt/libvirt.git
Cloning into libvirt...
real 9m57.209s
user 0m11.130s
sys 0m5.670s
$
~10 mins, but still, at least it worked.
For the gnulib submodule, I'm thinking it might be possible
to use a tarball as a workaround.
Fyodor, are you ok to try something?
If you can grab this tarball (41MB):
http://justinclift.fedorapeople.org/gnulib_commit_2f41af65.tar.bz2
Extract it somewhere (ie /tmp/gnulib), then set the
GNULIB_SRCDIR environment variable to point to it prior to doing
the libvirt pieces.
$ export GNULIB_SRCDIR=/tmp/gnulib
$ git clone http://git.gitorious.org/libvirt/libvirt.git
$ cd libvirt
$ ./autogen.sh
That *might* work. Not for sure, but probably worth trying.
+ Justin
9:34 a.m.
Unfortunately that didn't work (i mean the tarball download/unpack and
exporting env var)... I can make it to work as the installation is described
by several simple python scripts but this is not right solution.
Thank you guys for help, it seems to me that the only way is to ask our
sysadmins to open git ports for several opensource git repositories. I hope
they won't refuse.
Thank you again!
2011/1/24 Justin Clift <jclift(a)redhat.com>
On 24/01/2011, at 11:42 PM, Daniel P. Berrange wrote:
<snip>
> Err, http:// access works fine with gitorious. I think
> you simply didn't wait long enough. GIT's HTTP access
> mechanism is seriously inefficient, and doesn't appear
> to give you ongoing progress feedback like the git://
> protocol, so expect to wait a while. I've verified I
> can clone the main GIT repo over http in about 2 minutes
> using:
>
> git clone http://git.gitorious.org/libvirt/libvirt.git
Thanks Daniel. Tried http again (first time today) and this
time it worked:
$ time git clone http://git.gitorious.org/libvirt/libvirt.git
Cloning into libvirt...
real 9m57.209s
user 0m11.130s
sys 0m5.670s
$
~10 mins, but still, at least it worked.
For the gnulib submodule, I'm thinking it might be possible
to use a tarball as a workaround.
Fyodor, are you ok to try something?
If you can grab this tarball (41MB):
http://justinclift.fedorapeople.org/gnulib_commit_2f41af65.tar.bz2
Extract it somewhere (ie /tmp/gnulib), then set the
GNULIB_SRCDIR environment variable to point to it prior to doing
the libvirt pieces.
$ export GNULIB_SRCDIR=/tmp/gnulib
$ git clone http://git.gitorious.org/libvirt/libvirt.git
$ cd libvirt
$ ./autogen.sh
That *might* work. Not for sure, but probably worth trying.
+ Justin
2:29 a.m.
On Fri, Jan 21, 2011 at 07:15:46PM +1100, Justin Clift wrote:
On 21/01/2011, at 1:55 AM, Fyodor Kupchik wrote:
> Hi,
>
> I've just tried to do a fresh checkout (git clone) with libvirt sources tree and
had no luck because it seems to be inaccessible/non-existent at all. Is this temporary
situation or I have to only use git:// proto?
> I'm asking because I'm sitting behind rather restrictive corporate proxy
which does not allow anything but a little set of protocols such as HTTP(S).
Just checked the server setup here, and it doesn't look like there's any way
other than git://. Not even http://.
Sorry. :(
Well, right now there are still:
- hourly snapshots extracted from git available via http and FTP
ftp://libvirt.org/libvirt/
http://libvirt.org/sources/
- the git interface at
http://libvirt.org/git/?p=libvirt.git;a=summary
allows to extract snapshots
but git though HTTP is not configured, in general it's fairly inefficient.
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
5032
days inactive
5036
days old
17 comments
6 participants
participants (6)
-
Daniel P. Berrange -
Daniel Veillard -
Fyodor Kupchik -
James Barkley -
Justin Clift -
Osier Yang