Hi all.
I re-installed my KVM server with Debian stable again (squeeze) and it
works again (libvirt-bin 0.8.3-5+squeeze5).
I'll fill a bug with Debian, because maybe libvirt-bin 0.9.12-11 has
some kind of bug.
PD: I'm using RAID 1 software
Regards.
Javier
2013/3/17 Javi Legido <javi(a)legido.com>:
Hi all.
I was using libvirt under Debian squeeze (I guess it was
0.8.3-5+squeeze4 or something similar). I was able to clone machines
with below command:
sudo virt-clone --connect=qemu:///system -o template -n
template_clone -f /var/lib/libvirt/images/template_clone.qcow2
After that I was able to start the VM and connect to the console:
sudo virsh console template_clone
I recently Installed libvirt on a Debian wheezy ( libvirt-bin
0.9.12-11). I recuperated the old "template" VM, and I tried to create
a new one successfully.
What I CAN do:
1. Start both VM's (the template imported from the old installation
and the new one)
2. Connect to the console of both VM's
3. Clone them
What I CAN'T do:
1. Access to the console of the cloned VM, they stalled at the prompt.
Just in case config of the VM:
<domain type='kvm'>
<name>template-1.dev.jj.com</name>
<uuid>f75dcbdc-8fc9-b50c-6612-c34dfebea16f</uuid>
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>2</vcpu>
<os>
<type arch='x86_64' machine='pc-1.1'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/kvm</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' cache='none'/>
<source file='/var/lib/libvirt/images/template-1.dev.jj.com.qcow2'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04'
function='0x0'/>
</disk>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x01'
function='0x2'/>
</controller>
<interface type='network'>
<mac address='52:54:00:c0:c6:24'/>
<source network='default'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03'
function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x05'
function='0x0'/>
</memballoon>
</devices>
</domain>
Is somebody else experiencing the same problem? I'm not sure even that
the clones VM is working, since I'm able to start it up but no connect
to it.
Thanks.
Javier