Hi,
By using virtio-win-0.1.109.iso , it looks like vport0p devices are not configured (on
a Windows 2008 R2 guest) due to no suitable driver found ( below setupapi.dev.log):
[Boot Session: 2015/09/16 17:29:32.375]
>> [Device Install (Hardware initiated) -
{6fde7547-1b65-48ae-b628-80be62016026}\vioserialport\4&7e8053e&1&03]
>> Section start 2015/09/16 17:29:56.046
ump: Creating Install Process:
DrvInst.exe 17:29:56.109
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 17:29:56.328
dvi: Searching for hardware ID(s):
dvi: {6fde7547-1b65-48ae-b628-80be62016026}\vioserialport
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
inf: Searched 0 potential matches in published INF directory
inf: Searched 36 INFs in directory: 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 17:29:59.000
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 17:29:59.000
dvi: No class installer for 'vport0p3'
dvi: No CoInstallers found
dvi: Default installer: Enter 17:29:59.015
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 17:29:59.062
ndv: {Core Device Install} 17:29:59.062
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 17:29:59.687
dvi: No class installer for 'vport0p3'
dvi: Default installer: Enter 17:29:59.687
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 17:29:59.687
dvi: {DIF_INSTALLDEVICE} 17:29:59.687
dvi: No class installer for 'vport0p3'
dvi: Default installer: Enter 17:29:59.687
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
dvi: {Restarting Devices} 17:30:00.093
dvi: Restart:
{6FDE7547-1B65-48AE-B628-80BE62016026}\VIOSERIALPORT\4&7E8053E&1&03
dvi: Restart complete.
dvi: {Restarting Devices exit} 17:30:00.187
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 17:30:00.187
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 17:30:00.187
ump: Server install process exited with code 0xe0000203 17:30:00.203
<<< Section end 2015/09/16 17:30:00.203
<<< [Exit status: FAILURE(0xe0000203)]
Is there something I miss ?
Thanks for help.
J.P. Ribeauville
P: +33.(0).1.47.17.27.87
Puteaux 3 Etage 5 Bureau 4
jpribeauville@axway.com<mailto:jpribeauville@axway.com>
http://www.axway.com<http://www.axway.com/>
P Pensez à l'environnement avant d'imprimer.