[libvirt-users] cgroups limitations on Virtual machines

I have 2 VMs launched by : 'virsh create <xml file>' . Both VMs get 2 vcpus (out of total 2 cores of the host) I then try bias their cpu cycle quota by manipulating the cpu_shares ( virsh schedinfo --set cpu_shares=<value> vm1/2 ) so that VM1 will get 3 times the cpu cycles VM2 gets. (e.g : VM1 cpu_shares = 150 . VM2 cpu_shares = 50) . There are no other VMs defined or any other significant process running on the host . Each VM runs the same process (2 threads endless loop ). Still both VM1 and VM2 get equal share of the 2 cores - running top utility at the host shows each is consuming 100% CPU. At each VM console cat /proc/cpuinfo shows 2 cores assigned to the VM. At the host : virsh vcpuinfo <vm1/2> shows each has 2 vcpus (0 an 1 )but actually a single separate CPU is used for either vcpu0 or vcpu1 at each VM at any check point in time (this is reasonable as it does not say what portion of the core cycles is used by each VM) . Can anyone explain that and how to bias the core usage of the 2 VMs by manipulating the cpu_shares parameter (or other parameters) so that 'top' at the host will reflect the bias . I would expect 'top' at the host to show 150% CPU for VM1 ( qemu-system-x86) and 50% CPU for VM2 (the other qemu-system-x86) with above set cpu_share values . Doing the same test with 2 plain processes (instead VMs udner libvirt) with same cpu_shares bias gives the expected biased cpu usage between the 2 processes My system is fedora14 and kernel 2.6.35.6-45.fc14.x86_64 . thanks Zvi Dubitzky Email:dubi@il.ibm.com