Hi Martin
Thanks for your response. Here's the output of that grep:
# grep ^flags /proc/cpuinfo | sort -u
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall
nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor
ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2
x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat xsaveopt
pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
I've just managed to install the libvirt-bin:amd64 package on the same
machine, on the wheezy-i386 distribution. The output of 'virsh
capabilities' is now reported correctly, and my VMs that required
SandyBridge are now booting.
Have you any further suggestions?
Struan
On 03/03/2014 10:00, Martin Kletzander wrote:
On Fri, Feb 28, 2014 at 03:45:01PM +0000, Struan Bartlett wrote:
> Hi
>
> On a range of Dell servers containing Intel 64bit processors, 'virsh
> capabilities' reports the cpu differently on Debian Wheezy-amd64 and
> Wheezy-i386. The results given by the Wheezy-i386 version seem very
> wrong (since n270 is an Atom processor). Apart from architecture, the
> package versions of libvirt-bin are identical: 1.2.1-1~bpo70+1.
> /usr/share/libvirt/cpu_map.xml files are identical. Is this a known
> issue? Details for one server are:
>
> # cat /proc/cpuinfo| head -n 26
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 45
> model name : Intel(R) Xeon(R) CPU E5-2650L 0 @ 1.80GHz
> stepping : 7
> microcode : 0x70d
> cpu MHz : 1800.054
> cache size : 20480 KB
> physical id : 0
> siblings : 16
> core id : 0
> cpu cores : 8
> apicid : 0
> initial apicid : 0
> fpu : yes
> fpu_exception : yes
> cpuid level : 13
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
> syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good
> nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64
> monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1
> sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat
> xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
> bogomips : 3600.10
> clflush size : 64
> cache_alignment : 64
> address sizes : 46 bits physical, 48 bits virtual
> power management:
>
> ...
> </proc/cpuinfo for processors 1..31 snipped here for brevity>
>
Check if all 32 CPUs have *exactly* the same flags, I remember an
issue when we reported a wrong cpu because the probing code was
scheduled on one of them which had one flag missing. If package and
cpu_map.xml are the same, this is the only thing I can think of.
Simple 'grep ^flags /proc/cpuinfo | sort -u' should do. If only one
line is printed out than I don't know where the problem might be...
Martin
> # Running Wheezy-amd64 libvirt-bin1.2.1-1~bpo70+1
> # virsh capabilities
>
> <cpu>
> <arch>x86_64</arch>
> <model>SandyBridge</model>
> <vendor>Intel</vendor>
> <topology sockets='2' cores='8' threads='2'/>
> <feature name='pdpe1gb'/>
> <feature name='osxsave'/>
> <feature name='dca'/>
> <feature name='pcid'/>
> <feature name='pdcm'/>
> <feature name='xtpr'/>
> <feature name='tm2'/>
> <feature name='est'/>
> <feature name='smx'/>
> <feature name='vmx'/>
> <feature name='ds_cpl'/>
> <feature name='monitor'/>
> <feature name='dtes64'/>
> <feature name='pbe'/>
> <feature name='tm'/>
> <feature name='ht'/>
> <feature name='ss'/>
> <feature name='acpi'/>
> <feature name='ds'/>
> <feature name='vme'/>
> </cpu>
>
>
> # Running Wheezy-i386 libvirt-bin1.2.1-1~bpo70+1
> # virsh capabilities
>
> <cpu>
> <arch>x86_64</arch>
> <model>n270</model>
> <vendor>Intel</vendor>
> <topology sockets='2' cores='8' threads='2'/>
> <feature name='lahf_lm'/>
> <feature name='lm'/>
> <feature name='rdtscp'/>
> <feature name='pdpe1gb'/>
> <feature name='avx'/>
> <feature name='osxsave'/>
> <feature name='xsave'/>
> <feature name='aes'/>
> <feature name='tsc-deadline'/>
> <feature name='popcnt'/>
> <feature name='x2apic'/>
> <feature name='sse4.2'/>
> <feature name='sse4.1'/>
> <feature name='dca'/>
> <feature name='pcid'/>
> <feature name='pdcm'/>
> <feature name='xtpr'/>
> <feature name='cx16'/>
> <feature name='tm2'/>
> <feature name='est'/>
> <feature name='smx'/>
> <feature name='vmx'/>
> <feature name='ds_cpl'/>
> <feature name='dtes64'/>
> <feature name='pclmuldq'/>
> <feature name='pbe'/>
> <feature name='tm'/>
> <feature name='ht'/>
> <feature name='ss'/>
> <feature name='acpi'/>
> <feature name='ds'/>
> <feature name='pse36'/>
> </cpu>
>
> Kind regards
>
> Struan Bartlett
>
> --
>
> Struan Bartlett
> NewsNow Publishing Limited
>
> Tel: +44 (0)845 838 8890
> Fax: +44 (0)845 838 8898
>
> The UK's #1 News Portal:
>
>
> Also tailored for Mobile:
>
>
> Now with FREE Personalisation:
>
>
> Bespoke B2B Internet News Monitoring:
> > Internet News Monitoring
> <
http://www.newsnow.co.uk/services/newsmonitoring/>
>
> Bespoke B2B Headlines for Websites:
>
>
> NewsNow Publishing Limited, trading also as NewsNow.co.uk, is a company
> registered in England and Wales under company no. 3435857 with
> registered office The Euston Office, 1 Euston Square, 40 Melton Street,
> London NW1 2FD
>
> _______________________________________________
> libvirt-users mailing list
> libvirt-users(a)redhat.com
>
https://www.redhat.com/mailman/listinfo/libvirt-users
--
Struan Bartlett
NewsNow Publishing Limited
Tel: +44 (0)845 838 8890
Fax: +44 (0)845 838 8898
The UK's #1 News Portal:
Also tailored for Mobile:
Now with FREE Personalisation:
Bespoke B2B Internet News Monitoring:
Internet News Monitoring
<
http://www.newsnow.co.uk/services/newsmonitoring/>
Bespoke B2B Headlines for Websites:
NewsNow Publishing Limited, trading also as NewsNow.co.uk, is a company
registered in England and Wales under company no. 3435857 with
registered office The Euston Office, 1 Euston Square, 40 Melton Street,
London NW1 2FD