On 3/29/21 11:38 AM, Silvia Fichera wrote:
Hi Michal,
these are the steps:
- start the vm with qemu
sudo qemu-system-x86_64-spice -m 2048 -enable-kvm -smp 3 -cdrom
/home/machine_A/ubuntu.iso -netdev
tap,ifname=tap0,vhost=on,id=n1,vhostforce=on,queues=3,script=/etc/tap0_ifup.sh,downscript=/etc/tap0_ifdown.sh
-device virtio-net-pci,netdev=n1,mac=9E:58:00:d2:53:03,mq=on,vectors=8
-netdev
tap,ifname=tap1,vhost=on,id=n2,vhostforce=on,queues=3,script=/etc/tap1_ifup.sh,downscript=/etc/tap1_ifdown.sh
-device virtio-net-pci,netdev=n2,mac=7A:53:00:d1:59:04,mq=on,vectors=8
-device virtio-net,netdev=network2 -netdev user,id=network2 -hda
switch_A.img
- attach the tap to the bridges in the host machine (to have the traffic
coming from the outsider traffic generator injected in the vm)
- in the VM:
- enable ip_forward
- enable promiscuous mode for the interface
This sounds fishy. Why is this needed?
- send the "tc qdisc" command to configure the output
NIC with 2
traffic classes (TC) assigned to 2 different queues
- add the iptables mangle rules to the POSTROUTING chain to assign
TC1 to the traffic with dport 7777 and TC0 to the traffic with dport 8888
I'm sending 2 UDP flows, I have no loss under 3Mbps each.
If I capture traffic with tcpdump on the ingress and on the egress nic
(of the VM), I see a difference of 50% of packets
When I did a test on the host machine, to check if it has the same
problem, I've reached an aggregated traffic of 90Mbps with no loss.
That's why I think that there is some misconfiguration on the virtual NIC.
Well, that's fairly easy to test - create those two TAPs, do the setup
you're doing and instad of spawning qemu, run iperf or spirent and tell
it to use those TAPs. I think you'll find the problem elsewhere.
Anyway, this problem is not libvirt related really and I guess you can
find more elaborate replies on a list where TC developers hang out.
Looks like they're using latrc:
https://lartc.org/#mailinglist
Michal