Routed network can't reach outside network
by Rui Correia
Greetings folks.
I've setup libvirtd on my manjaro linux laptop.
Got a couple of VM's running (Win10 and Debian10) through NAT without any
issues.
This is what the current network diagram looks like and it works fine:
+-----------------------------------+
| +---------------------+ |
| | +----------+ | |
| | |Win 10 VM | | |
| | |10.1.1.10 | | |
| | +----------+ | |
| Laptop | | |
| Manjaro | +-------------+ | |
| 10.0.0.10 | |Debian 10 VM | | |
+-------->+ | |10.1.1.11 | | |
| | | +-------------+ | |
| | |NAT | |
| | |10.1.1.0/24 | |
| | +---------------------+ |
+------------+ | +-----------------------------------+
|router | |
|switch +---+
|10.0.0.0/24 | | +---------+
+------------+ | |Desktop |
+-------->+Manjaro |
|10.0.0.11|
+---------+
But now I need the debian machine to be accessible from another host on the
lan 10.0.0.0/24 which of course is outside the host.
That network diagram would look like this:
+-----------------------------------------+
| +------------------+ |
| | +----------+ | |
| | |Win 10 VM | | |
| | |10.1.1.10 | | |
| | NAT +----------+ | |
| | 10.1.1.0/24 | |
| +------------------+ |
| Laptop |
+-------->+ Manjaro +------------------------+ |
| | 10.0.0.10 | +-------------+ | |
| | | |Debian 10 VM | | |
| | | |10.2.2.10 | | |
| | | Routed +-------------+ | |
+------------+ | | | 10.2.2.0/24 | |
|router | | | +------------------------+ |
|switch +---+ +-----------------------------------------+
|10.0.0.0/24 | |
+------------+ |
|
| +---------+
| |Desktop |
+-------->+Manjaro |
|10.0.0.11|
+---------+
So, I've setup a 'routed network' for the Debian 10 VM but it's not working
as I would expect.
The host can ping the Debian VM and the Debian VM can ping the host but the
Debian VM cannot ping the router 10.0.0.1 or any ip address on the internet.
I've been using Virtual Machine Manager to set everything up.
And this is how the routed network is configured
<network connections="1">
<name>routed</name>
<uuid>970a25f7-29b6-4a6b-b890-f593eae4fc15</uuid>
<forward dev="wlo1" mode="route">
<interface dev="wlo1"/>
</forward>
<bridge name="virbr2" stp="on" delay="0"/>
<mac address="52:54:00:bf:35:42"/>
<domain name="routed"/>
<ip address="10.2.2.1" netmask="255.255.255.0">
<dhcp>
<range start="10.2.2.2" end="10.2.2.254"/>
</dhcp>
</ip>
</network>
Any idea on what i might be doing wrong?
Thanks in advance.
Cheers
Rui Correia
4 years, 3 months
machinectl does not show libvirtd vms
by Ismael Bouya
(this is a follow-up of a discussion on IRC with mprivozn)
Hello,
I’m facing an issue where systemd-machined is not aware of new VMs
happening in libvirt (with QEMU). I attached debug logs for a VM
starting.
To repeat the discussion that happened on IRC:
- libvirt config does not specify anything related to cgroup_controllers
- cgroups are mounted (mount | grep cgroup is not empty)
- in libvirtd.service I see no mention of cgroups (apart from comments
related to TasksMax and LimitMEMLOCK)
I’m suspecting a packaging issue in my distribution (NixOS) but I’m not
really sure where I should look at to solve it.
NB: the reason I wanted machinectl was to make use of nsswitch
mymachines facilities, which I learnt wouldn’t work anyway. So I’m only
reporting it in case something needs to be fixed (probably in my
distribution packaging).
--
Ismael
4 years, 3 months
Re: Routed network can't reach outside network
by Rui Correia
Hi Ken,
Of course I did it all by hand. :-D
No, I didn't. I'm a fraud. I used http://asciiflow.com/ which asks you to
register in order to save your drawings in their cloud. If you don't
register, you can still draw and export your drawings, but you can't save
them for reusing those later.
I see I've missed a couple of posts in this small thread. I was under the
impression that I had subscribed to the list but apparently I'm only
receiving the messages directly addressed to me. Hence why I took so much
time to reply.
I'll try to subscribe again.
Thank you all in advance.
Cheers,
Rui Correia
On Thu, Jul 23, 2020 at 3:31 PM Marc Roos <M.Roos(a)f1-outsourcing.eu> wrote:
>
>
>
> > you must be an ASCII charting demigod. Did you use software to make
> those, or do
> > them yourselves? Either way, I'm impressed...
>
> Search for AsciiArtStudio.exe
>
>
>
>
>
4 years, 3 months
virt-install missing parameters
by David
Hello,
Hopefully this is the right place to send a question like this...
I'm attempting to automate creation of VMs using virt-install and a
cloud-init disk image. To get this to work, I need to specify the location
of the cloud-init configs by passing smbios key/value pairs.
Normally, -smbios is provided to qemu to do this. With virt-install, the
Internet says I should use --sysinfo. However, --sysinfo (as well as
--qemu-comandline) is reported as an invalid command flag, and it is not
present when I look at man virt-install and virt-install --help.
I am hoping someone on the list knows why this isn't working or can explain
how I might provide the arguments to qemu. The host is Debian 9. It is
up-to-date as far as package versions are concerned, as much as Debian 9
can be. I can't find any indication about why the arguments would have been
taken away.
Thanks!
4 years, 3 months
host and vm on isolated network, there is ip (via dhcp) but not ping
by daggs
Greetings,
I've setup an vm with openwrt in it, defined a isolated lan between the vm and the host and booted the vm up.
I see the vm is up, made sure the vnic is visible in both the host and guest and added it to the br in the guest.
I've issued an dhcpd call on the vnic (labeled vnic0) in the host and got an ip, see:
dagg@NCC-5001D ~ $ dhcpcd vnet0
DUID 00:01:00:01:23:dd:d8:5b:e0:d5:5e:d9:f2:e2
vnet0: IAID 00:10:20:bf
vnet0: rebinding lease of 192.168.1.130
vnet0: probing address 192.168.1.130/24
vnet0: soliciting an IPv6 router
vnet0: leased 192.168.1.130 for 43200 seconds
vnet0: adding route to 192.168.1.0/24
vnet0: adding default route via 192.168.1.1
forked to background, child pid 26279
dagg@NCC-5001D ~ $ ifconfig
virtsw0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 52:54:00:3e:3f:88 txqueuelen 1000 (Ethernet)
RX packets 123098 bytes 16327962 (15.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6 bytes 252 (252.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.130 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::fc54:ff:fe10:20bf prefixlen 64 scopeid 0x20<link>
ether fe:54:00:10:20:bf txqueuelen 1000 (Ethernet)
RX packets 45 bytes 8002 (7.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 39 bytes 2676 (2.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
dagg@NCC-5001D ~ $ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
^C
--- 192.168.1.1 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1018ms
the vm's xml can be found at https://pastebin.com/1gXBGcPb
virtsw0 is defined as follows:
<network connections='1'>
<name>virtsw0</name>
<uuid>c8eb15a3-cc5c-4bd6-8f3b-5790792ddccc</uuid>
<bridge name='virtsw0' stp='on' delay='0'/>
<mac address='52:54:00:3e:3f:88'/>
</network>
the os is gentoo, the versions are libvirt-6.2.0 qemu-5.0.0.
I have another server running debian 10 with the same virtsw0 definition, there the connection is working.
/var/lib/libvirt/dnsmasq/virtsw0.macs has only [] in it, can that be the issue?
Thanks,
Dagg.
4 years, 3 months
incomplete features for external snapshot
by Henry lol
as far as I know, deleting/reverting features for external snapshot are not
being supported for long time.
I'm wondering why it takes so long time and what is the main problem even
though those tasks can be done manually.
thanks.
4 years, 3 months
9p file sharing issue
by Johan
I've run into an issue with 9p file sharing that I suspect is a bug. I'm running some Debian ARM VMs (armhf Ubuntu guests on an aarch64 Debian stretch host in case that matters). I'm using direct kernel boot, so I'm also using 9p host file sharing so that kernel updates from within the guest would work. However, I've noticed that dpkg (the Debian/Ubuntu package manager) fails when writing into a /boot directory that's shared from the host via 9p.
Some investigation reveals that this is because dpkg does an openat() call of the type
openat(AT_FDCWD, "/boot/vmlinuz-4.15.0-111-generic-lpae.dpkg-new", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 000);
and that it's the 0 permissions mode (last parameter) that causes the call to fail with a "Permission denied" error. A simple test program that does the above openat() call but with another mode (say, 600) works just fine.
Some further data:
* QEMU runs as the unprivileged user libvirt-qemu (Debian default)
* QEMU is version 2.8, libvirt version 3.0.0
* XML snippet for 9p setup:
<filesystem type='mount' accessmode='squash'>
<source dir='/host/path/boot-test9p'/>
<target dir='boot_mount'/>
<alias name='fs0'/>
<address type='pci' domain='0x0000' bus='0x03' slot='0x01' function='0x0'/>
</filesystem>
* The 9p filesystem is mounted by this line in /etc/fstab on the guest:
boot_mount /boot 9p rw,dirsync,_netdev,relatime,trans=virtio,version=9p2000.L 0 0
The essential problem seems to be that opening a file with a mode of 0 is not compatible with the "squash" 9p access mode. Is this expected?
Thank you,
Johan
4 years, 3 months
Unable to decode message length
by Valentin David
Hello all,
I have been trying to get libvirtd to work but when I connect to it
with virsh, I get "error : virNetMessageDecodeLength:131 : Unable to
decode message length"
This happens with libvirt 6.1.0, libtirpc 1.2.6, rpcsvc-proto 1.4.1. I
have tried with other versions, but I still get the same error.
If anybody has any tip on what to try next, that would be helpful.
Thank you in advance.
Here is the debug log of libvirtd when I try to connect with virsh:
2020-07-14 16:29:58.220+0000: 5352: info :
virEventGLibHandleDispatch:116 : EVENT_GLIB_DISPATCH_HANDLE: watch=2
events=1 cb=0x7f7b55b86c50 opaque=0x556fbcf8b8a0
2020-07-14 16:29:58.220+0000: 5352: info : virObjectNew:250 :
OBJECT_NEW: obj=0x556fbcf8d770 classname=virNetSocket
2020-07-14 16:29:58.220+0000: 5352: info : virNetSocketNew:278 :
RPC_SOCKET_NEW: sock=0x556fbcf8d770 fd=18 errfd=-1 pid=0
localAddr=127.0.0.1;0, remoteAddr=127.0.0.1;0
2020-07-14 16:29:58.220+0000: 5352: info : virObjectNew:250 :
OBJECT_NEW: obj=0x556fbcf8da50 classname=virNetServerClient
2020-07-14 16:29:58.220+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8d770
2020-07-14 16:29:58.220+0000: 5352: info : virEventGLibTimeoutAdd:341 :
EVENT_GLIB_ADD_TIMEOUT: timer=1 interval=-1 cb=0x7f7b55b8d490
opaque=0x556fbcf8da50 ff=(nil)
2020-07-14 16:29:58.220+0000: 5352: info :
virNetServerClientNewInternal:421 : RPC_SERVER_CLIENT_NEW:
client=0x556fbcf8da50 sock=0x556fbcf8d770
2020-07-14 16:29:58.220+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8da50
2020-07-14 16:29:58.220+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8d770
2020-07-14 16:29:58.220+0000: 5352: info : virEventGLibHandleAdd:160 :
EVENT_GLIB_ADD_HANDLE: watch=11 fd=18 events=1 cb=0x7f7b55b86c50
opaque=0x556fbcf8d770 ff=0x7f7b55b86c00
2020-07-14 16:29:58.220+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8da50
2020-07-14 16:29:58.220+0000: 5352: info : virNetServerCheckLimits:280
: Re-enabling services
2020-07-14 16:29:58.220+0000: 5352: info : virEventGLibHandleUpdate:194
: EVENT_GLIB_UPDATE_HANDLE: watch=2 events=1
2020-07-14 16:29:58.220+0000: 5352: info : virObjectNew:250 :
OBJECT_NEW: obj=0x556fbcf8e330 classname=virKeepAlive
2020-07-14 16:29:58.220+0000: 5352: info : virKeepAliveNew:208 :
RPC_KEEPALIVE_NEW: ka=0x556fbcf8e330 client=0x556fbcf8da50
2020-07-14 16:29:58.220+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8da50
2020-07-14 16:29:58.220+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8da50
2020-07-14 16:29:58.220+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8d770
2020-07-14 16:29:58.220+0000: 5352: info :
virEventGLibHandleDispatch:116 : EVENT_GLIB_DISPATCH_HANDLE: watch=11
events=1 cb=0x7f7b55b86c50 opaque=0x556fbcf8d770
2020-07-14 16:29:58.220+0000: 5352: error :
virNetMessageDecodeLength:131 : Unable to decode message length
2020-07-14 16:29:58.220+0000: 5352: info : virKeepAliveStop:300 :
RPC_KEEPALIVE_STOP: ka=0x556fbcf8e330 client=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8e330
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:349 :
OBJECT_DISPOSE: obj=0x556fbcf8e330
2020-07-14 16:29:58.221+0000: 5352: info : virKeepAliveDispose:221 :
RPC_KEEPALIVE_DISPOSE: ka=0x556fbcf8e330
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virObjectRef:385 :
OBJECT_REF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virEventGLibHandleRemove:261
: EVENT_GLIB_REMOVE_HANDLE: watch=11
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8d770
2020-07-14 16:29:58.221+0000: 5352: info : virNetServerCheckLimits:280
: Re-enabling services
2020-07-14 16:29:58.221+0000: 5352: info : virEventGLibHandleUpdate:194
: EVENT_GLIB_UPDATE_HANDLE: watch=2 events=1
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info :
virEventGLibHandleRemoveIdle:242 : EVENT_GLIB_REMOVE_HANDLE_IDLE:
watch=11 ff=0x7f7b55b86c00 opaque=0x556fbcf8d770
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:349 :
OBJECT_DISPOSE: obj=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info :
virNetServerClientDispose:976 : RPC_SERVER_CLIENT_DISPOSE:
client=0x556fbcf8da50
2020-07-14 16:29:58.221+0000: 5352: info :
virEventGLibTimeoutRemove:437 : EVENT_GLIB_REMOVE_TIMEOUT: timer=1
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:347 :
OBJECT_UNREF: obj=0x556fbcf8d770
2020-07-14 16:29:58.221+0000: 5352: info : virObjectUnref:349 :
OBJECT_DISPOSE: obj=0x556fbcf8d770
2020-07-14 16:29:58.221+0000: 5352: info : virNetSocketDispose:1332 :
RPC_SOCKET_DISPOSE: sock=0x556fbcf8d770
2020-07-14 16:29:58.221+0000: 5352: info :
virEventGLibTimeoutRemoveIdle:417 : EVENT_GLIB_REMOVE_TIMEOUT_IDLE:
timer=1 ff=(nil) opaque=0x556fbcf8da50
4 years, 3 months
