September 2013 - Users - libvirt List Archives

[libvirt-users] libvirt-qemu/kvm passthru w/Intel 82598EB
by laurence.schuler 04 Sep '13

04 Sep '13

Hi, I am trying to configure two identical systems with the following setup. dom0: Centos 6 OS on Apple Xserve i7 server with PCI cards for 4GB FC (LSI FC949ES) and 10GB Ethernet (Intel 82598EB) dom1: Centos 5 OS with passthru mode of PCI 4GB FC and 10GB Ethernet (ixgbe and mptfc blacklisted in dom0) Everything starts ok, but networking in dom1 using the 10GB interface has extremely high rtt w/ping tests (20-30ms avg). I've tried a few tweaks I've discovered via googling, but nothing seems to help. (run libvirt as root, set privilege mode, etc) For validation, I have the same card in Dell hosts running Centos 6 natively and they get an avg rtt of .06ms or better. Furthemore the Dell will contact the dom1 but the connection has rtt avg times of about 6ms. With the ethernet interface on the motherboard of the Apple Xserve, I will see rtt times of .06ms within the dom1's, so I think this points to a problem with the Intel card passthru usage, perhaps interrupts handling?. Does anyone know if I need to set any special options for the ixgbe driver under libvirt? TIA, -- Laurence Schuler (Larry) Laurence.Schuler(a)nasa.gov Systems Support ADNET Systems, Inc Scientific Visualization Studio http://svs.gsfc.nasa.gov NASA/Goddard Space Flight Center, Code 606.4 phone: 1-301-286-1799 Greenbelt, MD 20771 fax: 1-301-286-1634 Note: I am not a government employee and have no authority to obligate any federal, state or local government to perform any action or payment.FC949ES

2 1

[libvirt-users] error: virDBusCallMethod
by Thomas Stein 03 Sep '13

03 Sep '13

Hello. Since upgrading to libvirt-1.1.2 i get this error: 2013-09-03 08:29:55.258+0000: 2281: error : virDBusCallMethod:1156 : The name org.freedesktop.machine1 was not provided by any .service files Also live migration doesn't seem to work anymore. There is no error except the above one but the machine is not accessible anymore after migration. The machine is running if i believe "virsh list" but as i said, no ping no nothing. How can i debug this further? thanks and cheers t.

2 2

[libvirt-users] libvirt_lxc heavy cpu usage ?
by zhongjj 03 Sep '13

03 Sep '13

I am running lxc via libvirt1.1.1, the cpu usage is heavy of process libvirt_lxc. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2384 root 20 0 10480 2048 1200 R 99.6 0.1 1291:39 libvirt_lxc 32157 root 20 0 10448 2032 1200 R 99.3 0.1 1316:02 libvirt_lxc 28228 root 20 0 10448 2064 1216 R 99.0 0.1 5663:43 libvirt_lxc 30461 root 20 0 10480 2048 1200 R 98.7 0.1 5663:15 libvirt_lxc btw: 0.9.3 is the same ,I googled it , only two reports . any suggestions ? thx

1 0

[libvirt-users] Running libvirt on a virtualized server
by Andre Gustavo Pereira da Silva 03 Sep '13

03 Sep '13

Hi everyone I'm trying to create a virtual machine using OpenNebula [1] on a centos 6.4 server, but i'm facing some erros using kvm / libvirt. This server is running on a virtual machine created on XCP. Then, my infrastructure is: XCP 1.6 (hypervisor - dom0) + CentOS 6.4 (running on a XCP VM) + OpenNebula 4.0.1 (installed on CentOS). In the host machine, I have the same infrastructure. The problem I'm facing is that, by following the tutorial [2], i've noticed that neither the parameter 'vmx' nor 'svm' is listed on the CPU information provided by the virtual machine where the centOs is running. However, if i run the same command in XCP hypervisor, the parameter 'vmx' is listed. That is, the CPU informations provided by XCP are different from those provided by its virtual machines. My question is: is it possible to use libvirt in this scenario? Here are some messages: - Libvirt log on centoOS (XCP VM): Aug 27 13:26:21 localhost libvirtd: 9945: info : libvirt version: 0.10.2, package: 18.el6_4.9 (CentOS BuildSystem <http://bugs.centos.org>, 2013-07-02-11:19:29, c6b8.bsys.dev.centos.org) Aug 27 13:26:21 localhost libvirtd: 9945: error : udevGetDMIData:1502 : Failed to get udev device for syspath '/sys/devices/virtual/dmi/id' or '/sys/class/dmi/id' Aug 27 13:26:21 localhost kernel: Ebtables v2.0 registered Aug 27 13:26:22 localhost kernel: lo: Disabled Privacy Extensions Aug 27 13:26:40 localhost polkitd[10145]: started daemon version 0.96 using authority implementation `local' version `0.96' Aug 27 13:28:35 localhost libvirtd: 9937: error : qemuProcessStart:3696 : unsupported configuration: Domain requires KVM, but it is not available. Check that virtualization is enabled in the host BIOS, and host configuration is setup to load the kvm modules. Aug 27 13:28:35 localhost libvirtd: 9937: error : qemuRemoveCgroup:768 : internal error Unable to find cgroup for one-8 Aug 27 13:28:35 localhost libvirtd: 9937: warning : qemuProcessStop:4349 : Failed to remove cgroup for one-8 - On XCP hypervisor: [root@xenserver2 ~]# egrep '(vmx|svm)' --color=always /proc/cpuinfo flags: fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht nx constant_tsc nonstop_tsc aperfmperf pni vmx est ssse3 sse4_1 sse4_2 popcnt hypervisor arat tpr_shadow vnmi flexpriority ept vpid flags: fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht nx constant_tsc nonstop_tsc aperfmperf pni vmx est ssse3 sse4_1 sse4_2 popcnt hypervisor arat tpr_shadow vnmi flexpriority ept vpid flags: fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht nx constant_tsc nonstop_tsc aperfmperf pni vmx est ssse3 sse4_1 sse4_2 popcnt hypervisor arat tpr_shadow vnmi flexpriority ept vpid flags: fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht nx constant_tsc nonstop_tsc aperfmperf pni vmx est ssse3 sse4_1 sse4_2 popcnt hypervisor arat tpr_shadow vnmi flexpriority ept vpid - On centOS (XCP VM): [root@centos2 ~]# cat /proc/cpuinfo processor: 0 vendor_id: GenuineIntel cpu family: 6 model: 44 model name: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz stepping: 2 cpu MHz: 2133.486 cache size: 8192 KB fpu: yes fpu_exception: yes cpuid level: 11 wp: yes flags: fpu de tsc msr pae cx8 sep cmov pat clflush mmx fxsr sse sse2 ss ht syscall nx lm rep_good aperfmperf unfair_spinlock pni ssse3 cx16 pcid sse4_1 sse4_2 popcnt hypervisor lahf_lm arat epb dts bogomips: 4266.97 clflush size: 64 cache_alignment: 64 address sizes: 40 bits physical, 48 bits virtual thanks André Gustavo Recife-PE Brazil [1] http://opennebula.org/documentation:archives:rel1.4:libvirtapi [2]http://www.howtoforge.com/virtualization-with-kvm-on-a-centos-6.4-server

1 0

[libvirt-users] How to add uplink in ESXi virtual switch
by varun bhatnagar 03 Sep '13

03 Sep '13

Hi, I have an ESXi server, on top of it I have created one VM whose IP address is 192.168.79.1. I want to connect to the VM on ESXi server from my host machine but I am not able to do it. I have created a network "networkforSC" and I have pasted my xml file content below but I am not able to add any uplink (how to add it?) . Below is the xml file of my node as well as the network which I am creating on my ESXi server *<domain type='vmware'>* *<name>testNode</name>* *<uuid>50115e16-9bdc-49d7-f171-53c4d7f91710</uuid>* *<memory>1048576</memory>* *<currentMemory>1048576</currentMemory>* *<vcpu>1</vcpu>* *<console>/dev/console</console>* *<os>* *<type arch='x86_64'>hvm</type>* *</os>* *<devices>* *<disk type='file' device='disk'>* *<source file='[datastore1] testNode/testNode.vmdk'/>* *<target dev='sda' bus='scsi'/>* *<address type='drive' controller='0' bus='0' unit='0'/>* *</disk>* *<controller type='scsi' index='0' model='lsilogic'/>* ** *<interface type='bridge'>* *<mac address='00:50:56:25:48:c7'/>* *<source bridge='VM Network'/>* *</interface>* *<interface type='bridge'>* *<source bridge='test'/>* *</interface>* *</devices>* *</domain>* ########################################## Network File: *<network>* *<name>networkforSC</name>* *<portgroup name='test'>* *</portgroup>* *</network>* I have checked the network which got created on the server. As I have not attached any uplink (vmnic0) I can not see it (I want to attach it). #esxcli network vswitch standard list * * *networkforSC* *Name: networkforSC* *Class: etherswitch* *Num Ports: 128* *Used Ports: 2* *Configured Ports: 128* *MTU: 1500* *CDP Status: listen* *Beacon Enabled: false* *Beacon Threshold: 3* *Beacon Required By:* *Uplinks:* *Portgroups: test* Can anyone please help me out in adding the uplink and also can anyone tell me whether I am going in a right direction so that I could ping my virtual machine created on ESXi server. Regards, Varun

1 0

[libvirt-users] remote xenserver problem
by linxiao.st＠centerm.com.cn 02 Sep '13

02 Sep '13

HI： I’m a user of your libvirt, and it help me a lot of time. Thank you for your greate work! However,I found some understand problems,the following is my test environment: 1.I use the version of libvirt is libvirt1.1.1,when I want to use the command like this: #virsh -c xenapi://<my localip>/?no_verify=1 #virsh :list #enter username for<my localip>:root #enter password for<my localip>: it return correct list,but when i input virsh --all list this #virsh list --all it most of time return correct lists,but sometimes returns interal error:TRANSPORT_FAULT:56 why? With my good wishes! linxiao.st(a)centerm.com.cn

1 0

[libvirt-users] Redhat VM is not getting IP from DHCP
by Praveen Kumar 02 Sep '13

02 Sep '13

Hi, Below is the steps which I performed but not getting the IP of the guest. * Created a fresh VM (RHEL-6.4-server-x86_64) * Checked ifconfig output ( Getting IP from DHCP server) * Took xml dump. * Changed UUID in the xml * Changed MAC in the xml * Changed Name * defined a another VM using changed xml. * boot it up and checked the ifconfig status.( Not able to get IP) If same steps I follow in fedora guest then it's working as expected (getting the IP from DHCP). Any Suggestions? -- Praveen Kumar

1 0

[libvirt-users] how to setup network filter
by Jiaan Zeng 02 Sep '13

02 Sep '13

Hi All, I am new to libvirt and encounter a strange problem to set up network filter in a NAT network. I launched VMs in a single host using NAT, i.e. interface type='network'. Now I want to control the outbound traffic from VM instance - only allow the VM to asses a set of ip addresses. My network filter xml is as follows. The problem is once I change the VM xml, shutdown and start VM, VM cannot get ip address. /var/log/libvirt/libvirt.log shows " error : virNetDevGetIndex:656 : Unable to get index for interface vnet2: No such device" error. But when I remove the drop rule in the filter xml, VM can get IP address. I even tried the clean-traffic filter shipped with libvirt. VM throws the same error above. Any idea why this happens? How can I implement outbound traffic control in libvirt? Thanks a lot. <filter name='filter-test'> <rule action='accept' direction='in' priority='500'> <tcp dstportstart='22'/> </rule> <rule action='accept' direction='out' priority='500'> <ip dstipaddr='IP1'/> </rule> <rule action='accept' direction='out' priority='500'> <ip dstipaddr='IP2'/> </rule> <rule action='drop' direction='out' priority='500'> <all/> </rule> </filter> The VM network section XML looks like this <interface type='network'> <mac address='52:54:00:0d:f1:ce'/> <source network='default'/> <filterref filter='filter-test'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> -- Regards, Jiaan

1 0