- Devel - libvirt List Archives

[PATCH] Revert "spec: Simplify setting features off by default"
by Neal Gompa 28 Oct '20

28 Oct '20

As it turns out, the rather complicated structure that is currently used for enabling or disabling features in the libvirt build does not cleanly map well to RPM's bcond feature. Consequently, we need these back in order to support trivially activating these features through extra macros as build inputs. This reverts commit 31d687a3218c9072d7050dd608e013e063ca180f. Signed-off-by: Neal Gompa <ngompa13(a)gmail.com> --- libvirt.spec.in | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index 2a4324b974..84515cc7de 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -98,14 +98,14 @@ %define with_numactl 0%{!?_without_numactl:1} # A few optional bits off by default, we enable later -%define with_fuse 0 -%define with_sanlock 0 -%define with_numad 0 -%define with_firewalld_zone 0 -%define with_libssh2 0 -%define with_wireshark 0 -%define with_libssh 0 -%define with_dmidecode 0 +%define with_fuse 0%{!?_without_fuse:0} +%define with_sanlock 0%{!?_without_sanlock:0} +%define with_numad 0%{!?_without_numad:0} +%define with_firewalld_zone 0%{!?_without_firewalld:0} +%define with_libssh2 0%{!?_without_libssh2:0} +%define with_wireshark 0%{!?_without_wireshark:0} +%define with_libssh 0%{!?_without_libssh:0} +%define with_dmidecode 0%{!?_without_dmidecode:0} # Finally set the OS / architecture specific special cases -- 2.28.0

3 5

[PATCH 00/12] use g_autoptr for all DIR*
by Laine Stump 28 Oct '20

28 Oct '20

I don't even remember why I started looking at this. I think that again I was considering changing some function, and making the DIR* in that function autoclose was a prerequisite for a reasonably clean addition to the function. I eventually gave up on the other plan (probably because it was a bad idea), but decided that the DIR*'s really did need to autoclose. In the end, all uses of DIR* could be easily converted to use g_autoptr. Laine Stump (12): consistently use VIR_DIR_CLOSE() instead of virDirClose() tools: reduce scope of a DIR* in virHostValidateIOMMU() storage: remove extraneous call to VIR_DIR_CLOSE() util: reduce scope of a DIR * in virCgroupV1SetOwner() util: manually set dirp to NULL after closing in virCapabilitiesInitCache() util: change virDirClose to take a DIR* instead of DIR**. util: declare g_autoptr cleanup function to auto-close DIR* change DIR* int g_autoptr(DIR) where appropriate conf: convert final DIR* to g_autoptr util: remove unused VIR_DIR_CLOSE() macro util: refactor function to simplify and remove label remove unnecessary cleanup labels and unused return variables src/bhyve/bhyve_capabilities.c | 3 +- src/conf/capabilities.c | 5 +- src/conf/virdomainobjlist.c | 3 +- src/conf/virnetworkobj.c | 44 +++++--------- src/conf/virnwfilterbindingobjlist.c | 3 +- src/conf/virnwfilterobj.c | 3 +- src/conf/virsecretobj.c | 3 +- src/conf/virstorageobj.c | 6 +- src/openvz/openvz_conf.c | 3 +- src/qemu/qemu_driver.c | 6 +- src/qemu/qemu_interop_config.c | 14 ++--- src/security/security_selinux.c | 8 +-- src/storage/storage_backend_iscsi.c | 3 +- src/storage/storage_util.c | 69 ++++++++------------- src/util/vircgroup.c | 23 +++---- src/util/vircgroupv1.c | 5 +- src/util/vircommand.c | 12 ++-- src/util/virdevmapper.c | 9 +-- src/util/virfile.c | 65 ++++++++------------ src/util/virfile.h | 4 +- src/util/virhook.c | 8 +-- src/util/virhostcpu.c | 6 +- src/util/virnetdev.c | 13 ++-- src/util/virnuma.c | 24 +++----- src/util/virpci.c | 91 +++++++++++----------------- src/util/virprocess.c | 3 +- src/util/virresctrl.c | 30 ++++----- src/util/virscsi.c | 32 ++++------ src/util/virscsihost.c | 3 +- src/util/virusb.c | 3 +- src/util/virutil.c | 26 +++----- src/util/virvhba.c | 20 +++--- tests/testutilsqemu.c | 35 ++++------- tests/virschematest.c | 3 +- tools/virt-host-validate-common.c | 4 +- 35 files changed, 206 insertions(+), 386 deletions(-) -- 2.26.2

2 15

[PATCH] node_device: fix leak of DIR*
by Laine Stump 28 Oct '20

28 Oct '20

Commit 53aec799fa31 introduced the function udevGetVDPACharDev(), which scans a directory using virDirOpenIfExists() and virDirRead(). It unfortunately forgets to close the DIR* when it is finished with it. This patch fixes that omission. Signed-off-by: Laine Stump <laine(a)redhat.com> --- src/node_device/node_device_udev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/node_device/node_device_udev.c b/src/node_device/node_device_udev.c index b1b8427c05..ec0bf9192b 100644 --- a/src/node_device/node_device_udev.c +++ b/src/node_device/node_device_udev.c @@ -1162,6 +1162,7 @@ udevGetVDPACharDev(const char *sysfs_path, virReportError(VIR_ERR_INTERNAL_ERROR, _("vDPA chardev path '%s' does not exist"), chardev); + VIR_DIR_CLOSE(dir); return -1; } VIR_DEBUG("vDPA chardev is at '%s'", chardev); @@ -1171,6 +1172,8 @@ udevGetVDPACharDev(const char *sysfs_path, } } + VIR_DIR_CLOSE(dir); + if (direrr < 0) return -1; -- 2.26.2

3 2

[libvirt PATCH v2] libvirt-guests: Sync time for autostarted guests
by Tim Wiederhake 28 Oct '20

28 Oct '20

From: Orion Poplawski <orion(a)nwra.com> Setting SYNC_TIME=1 does not work on autostarted guests. See https://bugzilla.redhat.com/show_bug.cgi?id=1555398. Signed-off-by: Tim Wiederhake <twiederh(a)redhat.com> --- tools/libvirt-guests.sh.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/libvirt-guests.sh.in b/tools/libvirt-guests.sh.in index d69df908d2..87f96af14d 100644 --- a/tools/libvirt-guests.sh.in +++ b/tools/libvirt-guests.sh.in @@ -206,9 +206,9 @@ start() { retval run_virsh "$uri" start $bypass "$name" \ >/dev/null && \ gettext "done"; echo - if "$sync_time"; then - run_virsh "$uri" domtime --sync "$name" >/dev/null - fi + fi + if "$sync_time"; then + run_virsh "$uri" domtime --sync "$name" >/dev/null fi fi done -- 2.26.2

2 1

migration/dirtyrate: Introduce APIs for getting domain memory dirty rate
by Hao Wang 28 Oct '20

28 Oct '20

V2 -> V3: reorganize patchset to fix compile warning V1 -> V2: replace QEMU_JOB_ASYNC with QEMU_JOB_QUERY Sometimes domain's memory dirty rate is expected by user in order to decide whether it's proper to be migrated out or not. We have already completed the QEMU part of the capability: https://patchew.org/QEMU/1600237327-33618-1-git-send-email-zhengchuan@huawe… And this serial of patches introduce the corresponding LIBVIRT part -- DomainGetDirtyRateInfo API and corresponding virsh api -- "getdirtyrate". instructions: bash# virsh getdirtyrate --help NAME getdirtyrate - Get a vm's memory dirty rate SYNOPSIS getdirtyrate <domain> [--seconds <number>] [--calculate] [--query] DESCRIPTION Get memory dirty rate of a domain in order to decide whether it's proper to be migrated out or not. OPTIONS [--domain] <string> domain name, id or uuid --seconds <number> calculate memory dirty rate within specified seconds, a valid range of values is [1, 60], and would default to 1s. --calculate calculate dirty rate only, can be used together with --query, either or both is expected, otherwise would default to both. --query query dirty rate only, can be used together with --calculate, either or both is expected, otherwise would default to both. example: bash# virsh getdirtyrate --calculate --query --domain vm0 --seconds 1 status: measured startTime: 820148 calcTime: 1 s dirtyRate: 6 MB/s Hao Wang (7): migration/dirtyrate: Introduce virDomainDirtyRateInfo structure migration/dirtyrate: set up framwork of domainGetDirtyRateInfo API migration/dirtyrate: Implement qemuDomainGetDirtyRateInfo migration/dirtyrate: Implement qemuDomainCalculateDirtyRate migration/dirtyrate: Implement qemuDomainCalculateDirtyRate migration/dirtyrate: Implement qemuMonitorJSONExtractDirtyRateInfo migration/dirtyrate: Introduce getdirtyrate virsh api include/libvirt/libvirt-domain.h | 56 ++++++++++++++++ src/driver-hypervisor.h | 7 ++ src/libvirt-domain.c | 46 +++++++++++++ src/libvirt_public.syms | 5 ++ src/qemu/qemu_driver.c | 67 ++++++++++++++++++ src/qemu/qemu_migration.c | 59 ++++++++++++++++ src/qemu/qemu_migration.h | 10 +++ src/qemu/qemu_monitor.c | 24 +++++++ src/qemu/qemu_monitor.h | 8 +++ src/qemu/qemu_monitor_json.c | 97 ++++++++++++++++++++++++++ src/qemu/qemu_monitor_json.h | 8 +++ src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 21 +++++- tools/virsh-domain.c | 112 +++++++++++++++++++++++++++++++ 14 files changed, 520 insertions(+), 1 deletion(-) -- 2.23.0

2 9

[PULL 06/12] nbd: Update qapi to support exporting multiple bitmaps
by Eric Blake 27 Oct '20

27 Oct '20

Since 'block-export-add' is new to 5.2, we can still tweak the interface; there, allowing 'bitmaps':['str'] is nicer than 'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit passing multiple bitmaps as distinct metadata contexts that the NBD client may request, but the actual support for more than one will require a further patch to the server. Note that there are no changes made to the existing deprecated 'nbd-server-add' command; this required splitting the QAPI type BlockExportOptionsNbd, which fortunately does not affect QMP introspection. Signed-off-by: Eric Blake <eblake(a)redhat.com> Message-Id: <20201027050556.269064-5-eblake(a)redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov(a)virtuozzo.com> Reviewed-by: Peter Krempa <pkrempa(a)redhat.com> --- docs/system/deprecated.rst | 3 ++- qapi/block-export.json | 41 +++++++++++++++++++++++++++----------- blockdev-nbd.c | 6 +++++- nbd/server.c | 19 ++++++++++++------ qemu-nbd.c | 18 ++++++++--------- 5 files changed, 58 insertions(+), 29 deletions(-) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index 0ebce37a1919..32a0e620dbb9 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -257,7 +257,8 @@ the 'wait' field, which is only applicable to sockets in server mode '''''''''''''''''''''''''''''''''''''''''''''''''''''''' Use the more generic commands ``block-export-add`` and ``block-export-del`` -instead. +instead. As part of this deprecation, where ``nbd-server-add`` used a +single ``bitmap``, the new ``block-export-add`` uses a list of ``bitmaps``. Human Monitor Protocol (HMP) commands ------------------------------------- diff --git a/qapi/block-export.json b/qapi/block-export.json index 480c497690b0..c4125f4d2104 100644 --- a/qapi/block-export.json +++ b/qapi/block-export.json @@ -63,10 +63,10 @@ '*max-connections': 'uint32' } } ## -# @BlockExportOptionsNbd: +# @BlockExportOptionsNbdBase: # -# An NBD block export (options shared between nbd-server-add and the NBD branch -# of block-export-add). +# An NBD block export (common options shared between nbd-server-add and +# the NBD branch of block-export-add). # # @name: Export name. If unspecified, the @device parameter is used as the # export name. (Since 2.12) @@ -74,15 +74,27 @@ # @description: Free-form description of the export, up to 4096 bytes. # (Since 5.0) # -# @bitmap: Also export the dirty bitmap reachable from @device, so the -# NBD client can use NBD_OPT_SET_META_CONTEXT with -# "qemu:dirty-bitmap:NAME" to inspect the bitmap. (since 4.0) -# # Since: 5.0 ## +{ 'struct': 'BlockExportOptionsNbdBase', + 'data': { '*name': 'str', '*description': 'str' } } + +## +# @BlockExportOptionsNbd: +# +# An NBD block export (distinct options used in the NBD branch of +# block-export-add). +# +# @bitmaps: Also export each of the named dirty bitmaps reachable from +# @device, so the NBD client can use NBD_OPT_SET_META_CONTEXT with +# the metadata context name "qemu:dirty-bitmap:BITMAP" to inspect +# each bitmap. +# +# Since: 5.2 +## { 'struct': 'BlockExportOptionsNbd', - 'data': { '*name': 'str', '*description': 'str', - '*bitmap': 'str' } } + 'base': 'BlockExportOptionsNbdBase', + 'data': { '*bitmaps': ['str'] } } ## # @BlockExportOptionsVhostUserBlk: @@ -106,19 +118,24 @@ ## # @NbdServerAddOptions: # -# An NBD block export. +# An NBD block export, per legacy nbd-server-add command. # # @device: The device name or node name of the node to be exported # # @writable: Whether clients should be able to write to the device via the # NBD connection (default false). # +# @bitmap: Also export a single dirty bitmap reachable from @device, so the +# NBD client can use NBD_OPT_SET_META_CONTEXT with the metadata +# context name "qemu:dirty-bitmap:BITMAP" to inspect the bitmap +# (since 4.0). +# # Since: 5.0 ## { 'struct': 'NbdServerAddOptions', - 'base': 'BlockExportOptionsNbd', + 'base': 'BlockExportOptionsNbdBase', 'data': { 'device': 'str', - '*writable': 'bool' } } + '*writable': 'bool', '*bitmap': 'str' } } ## # @nbd-server-add: diff --git a/blockdev-nbd.c b/blockdev-nbd.c index cee9134b12eb..d8443d235b73 100644 --- a/blockdev-nbd.c +++ b/blockdev-nbd.c @@ -209,8 +209,12 @@ void qmp_nbd_server_add(NbdServerAddOptions *arg, Error **errp) .has_writable = arg->has_writable, .writable = arg->writable, }; - QAPI_CLONE_MEMBERS(BlockExportOptionsNbd, &export_opts->u.nbd, + QAPI_CLONE_MEMBERS(BlockExportOptionsNbdBase, &export_opts->u.nbd, qapi_NbdServerAddOptions_base(arg)); + if (arg->has_bitmap) { + export_opts->u.nbd.has_bitmaps = true; + QAPI_LIST_PREPEND(export_opts->u.nbd.bitmaps, g_strdup(arg->bitmap)); + } /* * nbd-server-add doesn't complain when a read-only device should be diff --git a/nbd/server.c b/nbd/server.c index 08b621f70a3a..8d01662b4511 100644 --- a/nbd/server.c +++ b/nbd/server.c @@ -1474,6 +1474,7 @@ static int nbd_export_create(BlockExport *blk_exp, BlockExportOptions *exp_args, uint64_t perm, shared_perm; bool readonly = !exp_args->writable; bool shared = !exp_args->writable; + strList *bitmaps; int ret; assert(exp_args->type == BLOCK_EXPORT_TYPE_NBD); @@ -1533,12 +1534,18 @@ static int nbd_export_create(BlockExport *blk_exp, BlockExportOptions *exp_args, } exp->size = QEMU_ALIGN_DOWN(size, BDRV_SECTOR_SIZE); - if (arg->bitmap) { + /* XXX Allow more than one bitmap */ + if (arg->bitmaps && arg->bitmaps->next) { + error_setg(errp, "multiple bitmaps per export not supported yet"); + return -EOPNOTSUPP; + } + for (bitmaps = arg->bitmaps; bitmaps; bitmaps = bitmaps->next) { + const char *bitmap = bitmaps->value; BlockDriverState *bs = blk_bs(blk); BdrvDirtyBitmap *bm = NULL; while (bs) { - bm = bdrv_find_dirty_bitmap(bs, arg->bitmap); + bm = bdrv_find_dirty_bitmap(bs, bitmap); if (bm != NULL) { break; } @@ -1548,7 +1555,7 @@ static int nbd_export_create(BlockExport *blk_exp, BlockExportOptions *exp_args, if (bm == NULL) { ret = -ENOENT; - error_setg(errp, "Bitmap '%s' is not found", arg->bitmap); + error_setg(errp, "Bitmap '%s' is not found", bitmap); goto fail; } @@ -1562,15 +1569,15 @@ static int nbd_export_create(BlockExport *blk_exp, BlockExportOptions *exp_args, ret = -EINVAL; error_setg(errp, "Enabled bitmap '%s' incompatible with readonly export", - arg->bitmap); + bitmap); goto fail; } bdrv_dirty_bitmap_set_busy(bm, true); exp->export_bitmap = bm; - assert(strlen(arg->bitmap) <= BDRV_BITMAP_MAX_NAME_SIZE); + assert(strlen(bitmap) <= BDRV_BITMAP_MAX_NAME_SIZE); exp->export_bitmap_context = g_strdup_printf("qemu:dirty-bitmap:%s", - arg->bitmap); + bitmap); assert(strlen(exp->export_bitmap_context) < NBD_MAX_STRING_SIZE); } diff --git a/qemu-nbd.c b/qemu-nbd.c index a0701cdf369d..74e73a74657b 100644 --- a/qemu-nbd.c +++ b/qemu-nbd.c @@ -574,7 +574,7 @@ int main(int argc, char **argv) QDict *options = NULL; const char *export_name = NULL; /* defaults to "" later for server mode */ const char *export_description = NULL; - const char *bitmap = NULL; + strList *bitmaps = NULL; const char *tlscredsid = NULL; bool imageOpts = false; bool writethrough = true; @@ -690,7 +690,7 @@ int main(int argc, char **argv) flags &= ~BDRV_O_RDWR; break; case 'B': - bitmap = optarg; + QAPI_LIST_PREPEND(bitmaps, g_strdup(optarg)); break; case 'k': sockpath = optarg; @@ -786,7 +786,7 @@ int main(int argc, char **argv) exit(EXIT_FAILURE); } if (export_name || export_description || dev_offset || - device || disconnect || fmt || sn_id_or_name || bitmap || + device || disconnect || fmt || sn_id_or_name || bitmaps || seen_aio || seen_discard || seen_cache) { error_report("List mode is incompatible with per-device settings"); exit(EXIT_FAILURE); @@ -1067,12 +1067,12 @@ int main(int argc, char **argv) .has_writable = true, .writable = !readonly, .u.nbd = { - .has_name = true, - .name = g_strdup(export_name), - .has_description = !!export_description, - .description = g_strdup(export_description), - .has_bitmap = !!bitmap, - .bitmap = g_strdup(bitmap), + .has_name = true, + .name = g_strdup(export_name), + .has_description = !!export_description, + .description = g_strdup(export_description), + .has_bitmaps = !!bitmaps, + .bitmaps = bitmaps, }, }; blk_exp_add(export_opts, &error_fatal); -- 2.29.0

1 0

[PATCH] re-add cscope db files to .gitignore
by Laine Stump 27 Oct '20

27 Oct '20

Commit f7114e61db removed these lines as being "old and obsolete". cscope may be old, but it is still very much useful and used (i.e. *not* obsolete), and having the files show up as "Untracked files:" every time git status is run is annoying. Signed-off-by: Laine Stump <laine(a)redhat.com> --- I'm not sure why I didn't notice this omission until now, but a couple weeks ago it resulted in my accidentally committing my cscope.out and cscope.files to git (fortunately I noticed it before I posted the patch!) It could be argued (as abologna did on IRC) that users should just add these to their private user-global .gitignore, but if that's the case, then the vim and emacs-related files should also be removed from libvirt's .gitignore (also suggested by abologna :-)). However if you do that, then any time you checkout libvirt on some random new machine where you haven't imported your personal home directory template will end up showing these by-product files. Also, somebody newly entering the project will potentially have the files showing up and bothering them. Anyway, I'm not necessarily advocating for re-adding the cscope files, but sending a patch seemed to be like the most useful way of discussing it. .gitignore | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/.gitignore b/.gitignore index 6d44a50061..feb2bcb017 100644 --- a/.gitignore +++ b/.gitignore @@ -8,6 +8,12 @@ .#* *~ +# cscope related ignores +cscope.files +cscope.in.out +cscope.out +cscope.po.out + # git related ignores *.rej *.orig -- 2.26.2

2 1

[PATCH] cpu_ppc64: compare CPU function is ignoring return value
by Julio Faracco 27 Oct '20

27 Oct '20

Function to compare CPU on 64-bit PowerPC is ignoring the flag to avoid failure in case of CPUs (host and guest) are incompatible. Basically, the function is returning -1 even if it is set to continue. Signed-off-by: Julio Faracco <jcfaracco(a)gmail.com> --- src/cpu/cpu_ppc64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/cpu/cpu_ppc64.c b/src/cpu/cpu_ppc64.c index 2fedcd25da..23ea5a6a3e 100644 --- a/src/cpu/cpu_ppc64.c +++ b/src/cpu/cpu_ppc64.c @@ -517,7 +517,7 @@ virCPUppc64Compare(virCPUDefPtr host, virCPUDefPtr cpu, bool failIncompatible) { - virCPUCompareResult ret; + virCPUCompareResult ret = -1; g_autofree char *message = NULL; if (!host || !host->model) { @@ -528,7 +528,7 @@ virCPUppc64Compare(virCPUDefPtr host, VIR_WARN("unknown host CPU"); ret = VIR_CPU_COMPARE_INCOMPATIBLE; } - return -1; + return ret; } ret = ppc64Compute(host, cpu, NULL, &message); -- 2.25.1

2 2

[PATCH] util: Avoid double free in virProcessSetAffinity
by Martin Kletzander 27 Oct '20

27 Oct '20

The cpu mask was free()'d immediately on any error and at the end of the function, where it was expected that it would either error out and return or goto another allocation if the code was to fail. However since commit 9514e24984ee the error path did not return in one new case which caused double-free in such situation. In order to make the code more straightforward just free the mask after it's been used even before checking the return code of the call. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819801 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- src/util/virprocess.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/src/util/virprocess.c b/src/util/virprocess.c index 9366f0630c42..37413796b3f6 100644 --- a/src/util/virprocess.c +++ b/src/util/virprocess.c @@ -447,6 +447,7 @@ int virProcessSetAffinity(pid_t pid, virBitmapPtr map, bool quiet) int numcpus = 1024; size_t masklen; cpu_set_t *mask; + int rv = -1; VIR_DEBUG("Set process affinity on %lld", (long long)pid); @@ -472,8 +473,10 @@ int virProcessSetAffinity(pid_t pid, virBitmapPtr map, bool quiet) CPU_SET_S(i, masklen, mask); } - if (sched_setaffinity(pid, masklen, mask) < 0) { - CPU_FREE(mask); + rv = sched_setaffinity(pid, masklen, mask); + CPU_FREE(mask); + + if (rv < 0) { if (errno == EINVAL && numcpus < (1024 << 8)) { /* 262144 cpus ought to be enough for anyone */ numcpus = numcpus << 2; @@ -488,7 +491,6 @@ int virProcessSetAffinity(pid_t pid, virBitmapPtr map, bool quiet) return -1; } } - CPU_FREE(mask); return 0; } -- 2.28.0

2 1

[PATCH 00/13] Replace virHashTable by GHashTable (for 6.10)
by Peter Krempa 27 Oct '20

27 Oct '20

Our hash table API was surprisingly close to glibs. Peter Krempa (13): virhashtest: testHashGetItems: Remove test case for sorting by value util: hash: Rewrite sorting of elements in virHashGetItems util: virhash: Standardize on 'opaque' for opaque data util: hash: Introduce virHashForEachSorted Use virHashForEachSorted in tested code tests: remove virdeterministichashmock.so util: hash: Add delete-safe hash iterator util: hash: Use virHashForEachSafe in places which might delete the element util: hash: Don't use 'const' with virHashTablePtr util: hash: Reimplement virHashTable using GHashTable util: hash: Retire 'virHashTable' in favor of 'GHashTable' util: hash: Add deprecation notices for functions which have g_hash_table replacements tests: Remove 'virhashtest' src/conf/backup_conf.c | 2 +- src/conf/domain_addr.h | 2 +- src/conf/domain_conf.c | 12 +- src/conf/domain_conf.h | 2 +- src/conf/nwfilter_conf.h | 2 +- src/conf/nwfilter_ipaddrmap.c | 2 +- src/conf/nwfilter_params.c | 34 +- src/conf/nwfilter_params.h | 18 +- src/conf/snapshot_conf.c | 2 +- src/conf/virchrdev.c | 4 +- src/conf/virdomainmomentobjlist.c | 4 +- src/conf/virdomainobjlist.c | 6 +- src/conf/virinterfaceobj.c | 2 +- src/conf/virnetworkobj.c | 8 +- src/conf/virnodedeviceobj.c | 2 +- src/conf/virnwfilterbindingdef.h | 2 +- src/conf/virnwfilterbindingobjlist.c | 4 +- src/conf/virsecretobj.c | 2 +- src/conf/virstorageobj.c | 14 +- src/hyperv/hyperv_driver.c | 4 +- src/hyperv/hyperv_wmi.c | 18 +- src/hyperv/hyperv_wmi.h | 12 +- src/hypervisor/virclosecallbacks.c | 2 +- src/libvirt_private.syms | 6 +- src/libxl/libxl_logger.c | 2 +- src/locking/lock_daemon.c | 4 +- src/nwfilter/nwfilter_dhcpsnoop.c | 6 +- src/nwfilter/nwfilter_ebiptables_driver.c | 19 +- src/nwfilter/nwfilter_gentech_driver.c | 36 +- src/nwfilter/nwfilter_gentech_driver.h | 2 +- src/nwfilter/nwfilter_learnipaddr.c | 4 +- src/nwfilter/nwfilter_tech_driver.h | 2 +- src/qemu/qemu_agent.c | 4 +- src/qemu/qemu_backup.c | 14 +- src/qemu/qemu_backup.h | 2 +- src/qemu/qemu_block.c | 42 +- src/qemu/qemu_block.h | 18 +- src/qemu/qemu_blockjob.c | 6 +- src/qemu/qemu_capabilities.c | 8 +- src/qemu/qemu_checkpoint.c | 6 +- src/qemu/qemu_checkpoint.h | 2 +- src/qemu/qemu_conf.c | 4 +- src/qemu/qemu_conf.h | 2 +- src/qemu/qemu_domain.c | 8 +- src/qemu/qemu_domain.h | 2 +- src/qemu/qemu_driver.c | 24 +- src/qemu/qemu_interop_config.c | 13 +- src/qemu/qemu_migration.c | 2 +- src/qemu/qemu_migration_cookie.c | 2 +- src/qemu/qemu_monitor.c | 28 +- src/qemu/qemu_monitor.h | 20 +- src/qemu/qemu_monitor_json.c | 50 +- src/qemu/qemu_monitor_json.h | 22 +- src/qemu/qemu_process.c | 18 +- src/qemu/qemu_qapi.c | 14 +- src/qemu/qemu_qapi.h | 6 +- src/qemu/qemu_snapshot.c | 16 +- src/rpc/virnetdaemon.c | 13 +- src/security/security_selinux.c | 2 +- src/util/meson.build | 1 - src/util/virfilecache.c | 2 +- src/util/virhash.c | 569 +++++++----------- src/util/virhash.h | 57 +- src/util/virhashcode.c | 125 ---- src/util/virhashcode.h | 33 - src/util/viriptables.c | 4 +- src/util/virlockspace.c | 4 +- src/util/virmacmap.c | 4 +- src/util/virstoragefile.c | 8 +- src/util/virsystemd.c | 2 +- tests/meson.build | 2 - tests/nwfilterxml2firewalltest.c | 24 +- tests/qemublocktest.c | 26 +- tests/qemuhotplugtest.c | 6 +- tests/qemumigparamstest.c | 4 +- tests/qemumonitorjsontest.c | 30 +- tests/qemumonitortestutils.c | 6 +- tests/qemumonitortestutils.h | 4 +- tests/qemusecuritymock.c | 4 +- .../blockjob-blockdev-in.xml | 116 ++-- tests/qemuxml2argvtest.c | 4 +- tests/qemuxml2xmltest.c | 5 +- tests/testutilsqemu.c | 6 +- tests/testutilsqemu.h | 4 +- tests/testutilsqemuschema.c | 10 +- tests/testutilsqemuschema.h | 8 +- tests/virdeterministichashmock.c | 36 -- tests/virhashdata.h | 284 --------- tests/virhashtest.c | 564 ----------------- tests/virmacmaptest.c | 2 +- 90 files changed, 680 insertions(+), 1863 deletions(-) delete mode 100644 src/util/virhashcode.c delete mode 100644 src/util/virhashcode.h delete mode 100644 tests/virdeterministichashmock.c delete mode 100644 tests/virhashdata.h delete mode 100644 tests/virhashtest.c -- 2.26.2

4 21