- Devel - libvirt List Archives

[libvirt] [PATCH 0/2] bhyve: fix crashes when running without networking
by Roman Bogorodskiy 13 Jun '14

13 Jun '14

Craig Rodrigues reported a problem on freebsd-virtualization list when libvirtd with bhyve driver crashes when the bridge does not exist [1]. 1: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=1431191+0+current/freebsd-virt… These two patches addresses the problem. Roman Bogorodskiy (2): bhyve: fix crash in bhyveBuildNetArgStr bhyve: do not cleanup unallocated networks on fail src/bhyve/bhyve_command.c | 3 +-- src/bhyve/bhyve_process.c | 10 ++++++---- 2 files changed, 7 insertions(+), 6 deletions(-) -- 1.9.0

2 6

[libvirt] [PATCH] storage: report VIR_ERR_NO_STORAGE_VOL when the file doesn't exist
by Giuseppe Scrivano 13 Jun '14

13 Jun '14

Report VIR_ERR_NO_STORAGE_VOL instead of a system error when lstat fails because the file doesn't exist. Fixes this problem in virt-install: https://bugzilla.redhat.com/show_bug.cgi?id=1108922 Signed-off-by: Giuseppe Scrivano <gscrivan(a)redhat.com> --- src/storage/storage_backend.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/src/storage/storage_backend.c b/src/storage/storage_backend.c index 380ca58..b38af52 100644 --- a/src/storage/storage_backend.c +++ b/src/storage/storage_backend.c @@ -1305,9 +1305,15 @@ virStorageBackendVolOpen(const char *path, struct stat *sb, bool noerror = (flags & VIR_STORAGE_VOL_OPEN_NOERROR); if (lstat(path, sb) < 0) { - if (errno == ENOENT && noerror) { - VIR_WARN("ignoring missing file '%s'", path); - return -2; + if (errno == ENOENT) { + if (noerror) { + VIR_WARN("ignoring missing file '%s'", path); + return -2; + } + virReportError(VIR_ERR_NO_STORAGE_VOL, + _("no storage vol with matching path '%s'"), + path); + return -1; } virReportSystemError(errno, _("cannot stat file '%s'"), -- 1.9.3

2 2

[libvirt] [PATCH v6] bhyve: implement PCI address allocation
by Roman Bogorodskiy 13 Jun '14

13 Jun '14

Changes from v4: - Qemu-related part of sharing the common code is complete and pushed, so patch lives on its own now - virBhyveProcessBuildBhyveCmd() modified to loop over disks and nets and call bhyveBuildDiskArgStr() and bhyveBuildNetArgStr() for an individual device to make the latter more readable - Fix double assing / double semicolon typo - Fix spelling in virReportError() for disks - Make bhyveAssignDevicePCISlots() assign nets before disks to reproduce the old behaviour when one net and one disk were supported - Make persistentAddrs of _bhyveDomainObjPrivate bool. Changes from v5: - Call bhyveDomainAssignAddresses() in virBhyveProcessStart() in order not to break domains defined in the earlier versions of libvirtd that did no address assignment - Call bhyveDomainAssignAddresses() in bhyveDomainCreateXML() Roman Bogorodskiy (1): bhyve: implement PCI address allocation po/POTFILES.in | 1 + src/Makefile.am | 4 + src/bhyve/bhyve_command.c | 112 +++++++------ src/bhyve/bhyve_device.c | 174 +++++++++++++++++++++ src/bhyve/bhyve_device.h | 38 +++++ src/bhyve/bhyve_domain.c | 75 +++++++++ src/bhyve/bhyve_domain.h | 39 +++++ src/bhyve/bhyve_driver.c | 12 +- .../bhyvexml2argvdata/bhyvexml2argv-acpiapic.args | 2 +- tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-base.args | 2 +- tests/bhyvexml2argvdata/bhyvexml2argv-base.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-console.args | 4 +- tests/bhyvexml2argvdata/bhyvexml2argv-console.xml | 2 + .../bhyvexml2argv-disk-virtio.args | 2 +- .../bhyvexml2argv-disk-virtio.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-macaddr.args | 2 +- tests/bhyvexml2argvdata/bhyvexml2argv-macaddr.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-serial.args | 4 +- tests/bhyvexml2argvdata/bhyvexml2argv-serial.xml | 2 + 20 files changed, 416 insertions(+), 67 deletions(-) create mode 100644 src/bhyve/bhyve_device.c create mode 100644 src/bhyve/bhyve_device.h create mode 100644 src/bhyve/bhyve_domain.c create mode 100644 src/bhyve/bhyve_domain.h -- 1.9.0 Roman Bogorodskiy (1): bhyve: implement PCI address allocation po/POTFILES.in | 1 + src/Makefile.am | 4 + src/bhyve/bhyve_command.c | 112 +++++++------ src/bhyve/bhyve_device.c | 174 +++++++++++++++++++++ src/bhyve/bhyve_device.h | 38 +++++ src/bhyve/bhyve_domain.c | 75 +++++++++ src/bhyve/bhyve_domain.h | 39 +++++ src/bhyve/bhyve_driver.c | 15 +- src/bhyve/bhyve_process.c | 4 + .../bhyvexml2argvdata/bhyvexml2argv-acpiapic.args | 2 +- tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-base.args | 2 +- tests/bhyvexml2argvdata/bhyvexml2argv-base.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-console.args | 4 +- tests/bhyvexml2argvdata/bhyvexml2argv-console.xml | 2 + .../bhyvexml2argv-disk-virtio.args | 2 +- .../bhyvexml2argv-disk-virtio.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-macaddr.args | 2 +- tests/bhyvexml2argvdata/bhyvexml2argv-macaddr.xml | 2 + tests/bhyvexml2argvdata/bhyvexml2argv-serial.args | 4 +- tests/bhyvexml2argvdata/bhyvexml2argv-serial.xml | 2 + 21 files changed, 423 insertions(+), 67 deletions(-) create mode 100644 src/bhyve/bhyve_device.c create mode 100644 src/bhyve/bhyve_device.h create mode 100644 src/bhyve/bhyve_domain.c create mode 100644 src/bhyve/bhyve_domain.h -- 1.9.0

2 3

[libvirt] [RFC PATCH 0/5] Refactor storage file metadata operations when dealing with snapshots.
by Peter Krempa 13 Jun '14

13 Jun '14

Now that we track storage source as a pointer we might use this. Note that this is currently work in progress as I've didn't check all code paths and whether it's safe to modify the backing chains as I did. Peter Krempa (5): storage: encryption: Add deep copy function for storage encryption util: seclabel: Add deep copy function for device labels util: storagefile: Introduce helper to free storage source perms util: storagefile: Add deep copy for struct virStorageSource qemu: snapshot: Improve approach to deal with snapshot metadata src/libvirt_private.syms | 1 + src/qemu/qemu_driver.c | 108 +++++--------------------- src/util/virseclabel.c | 22 ++++++ src/util/virseclabel.h | 5 +- src/util/virstorageencryption.c | 39 ++++++++++ src/util/virstorageencryption.h | 2 + src/util/virstoragefile.c | 166 +++++++++++++++++++++++++++++++++++++++- src/util/virstoragefile.h | 2 + 8 files changed, 251 insertions(+), 94 deletions(-) -- 1.9.3

2 12

[libvirt] [PATCH] virNetDevGetLinkInfo: Don't report link speed if NIC's not up
by Michal Privoznik 13 Jun '14

13 Jun '14

The kernel's more broken than one would think. Various drivers report various (usually spurious) values if the interface is in other state than 'up' . While on some we experience -EINVAL when read()-ing the speed sysfs file, with other drivers we might get anything from 0 to UINT_MAX. If that's the case it's better to not report link speed. Well, the interface is not up anyway. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/util/virnetdev.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c index 6f3a202..a551f98 100644 --- a/src/util/virnetdev.c +++ b/src/util/virnetdev.c @@ -1875,6 +1875,16 @@ virNetDevGetLinkInfo(const char *ifname, lnk->state = tmp_state; + /* Shortcut to avoid some kernel issues. If link is not up several drivers + * report several misleading values. While igb reports 65535, realtek goes + * with 10. To avoid muddying XML with insane values, don't report link + * speed if that's the case. */ + if (lnk->state != VIR_INTERFACE_STATE_UP) { + lnk->speed = 0; + ret = 0; + goto cleanup; + } + VIR_FREE(path); VIR_FREE(buf); @@ -1901,11 +1911,7 @@ virNetDevGetLinkInfo(const char *ifname, goto cleanup; } - /* Workaround broken kernel API. If the link is unplugged then - * depending on the NIC driver, link speed can be reported as -1. - * However, the value is printed out as unsigned integer instead of - * signed one. Terrifying but true. */ - lnk->speed = (int) tmp_speed == -1 ? 0 : tmp_speed; + lnk->speed = tmp_speed; ret = 0; cleanup: -- 1.8.5.5

2 2

[libvirt] storage conf: Add key-value options to storage pools
by Wido den Hollander 13 Jun '14

13 Jun '14

This series of patches adds the ability to pass down options to the storage pool drivers. In the case of NFS users can specify mount options and in the case of RBD users can specify options for librados to influence some behavior. All options and values are checked on input validity to prevent injection of malicious commands. -- Wido den Hollander

4 7

[libvirt] [PATCH] virNetDevGetLinkInfo: Don't report link speed if NIC's down
by Michal Privoznik 13 Jun '14

13 Jun '14

The kernel's more broken than one would think. Various drivers report various (usually spurious) values if the interface is down. While on some we experience -EINVAL when read()-ing the speed sysfs file, with other drivers we might get anything from 0 to UINT_MAX. If that's the case it's better to not report link speed. Well, the interface is down anyway. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/util/virnetdev.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c index 6f3a202..80ef572 100644 --- a/src/util/virnetdev.c +++ b/src/util/virnetdev.c @@ -1843,7 +1843,7 @@ virNetDevGetLinkInfo(const char *ifname, char *buf = NULL; char *tmp; int tmp_state; - unsigned int tmp_speed; + unsigned int tmp_speed; /* virInterfaceState */ if (virNetDevSysfsFile(&path, ifname, "operstate") < 0) goto cleanup; @@ -1875,6 +1875,16 @@ virNetDevGetLinkInfo(const char *ifname, lnk->state = tmp_state; + /* Shortcut to avoid some kernel issues. If link is down (and possibly in + * other states too) several drivers report several values. While igb + * reports 65535, realtek goes with 10. To avoid muddying XML with insane + * values, don't report link speed */ + if (lnk->state == VIR_INTERFACE_STATE_DOWN) { + lnk->speed = 0; + ret = 0; + goto cleanup; + } + VIR_FREE(path); VIR_FREE(buf); @@ -1884,6 +1894,7 @@ virNetDevGetLinkInfo(const char *ifname, if (virFileReadAll(path, 1024, &buf) < 0) { /* Some devices doesn't report speed, in which case we get EINVAL */ if (errno == EINVAL) { + lnk->speed = 0; ret = 0; goto cleanup; } -- 1.8.5.5

4 8

[libvirt] [PATCHv4 00/21] block pull/commit on gluster volumes with relative backing
by Peter Krempa 13 Jun '14

13 Jun '14

Peter Krempa (21): security: Don't skip labelling for network disks util: string: Add helper to free non-NULL terminated string arrays util: storagefile: Introduce universal function to canonicalize paths storage: gluster: Add backend to return unique storage file path util: storage: Add helper to resolve relative path difference tests: virstoragetest: Remove "expBackingStore" field tests: virstoragetest: Fix output when hitting errors storage: Store relative path only for relatively backed storage tests: virstoragetest: Remove now unused pathAbs util: storage: Remove now redundant backingRelative from virStorageSource tests: virstoragetest: Don't test relative start of backing chains tests: virstoragetest: Remove unneeded relative test plumbing storage: Don't canonicalize paths unnecessarily storage: Don't store parent directory of an image explicitly qemu: caps: Add capability for change-backing-file command qemu: monitor: Add argument for specifying backing name for block commit qemu: monitor: Add support for backing name specification for block-stream lib: Introduce flag VIR_DOMAIN_BLOCK_COMMIT_RELATIVE lib: Introduce flag VIR_DOMAIN_BLOCK_REBASE_RELATIVE qemu: Add support for networked disks for block commit qemu: Add support for networked disks for block pull/block rebase include/libvirt/libvirt.h.in | 6 + src/libvirt.c | 10 + src/libvirt_private.syms | 3 + src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_driver.c | 85 ++++++- src/qemu/qemu_migration.c | 6 +- src/qemu/qemu_monitor.c | 21 +- src/qemu/qemu_monitor.h | 4 +- src/qemu/qemu_monitor_json.c | 17 ++ src/qemu/qemu_monitor_json.h | 2 + src/security/security_dac.c | 3 - src/security/security_selinux.c | 3 - src/storage/storage_backend_gluster.c | 80 ++++++ src/storage/storage_driver.c | 15 +- src/util/virstoragefile.c | 392 +++++++++++++++++++++++------ src/util/virstoragefile.h | 20 +- src/util/virstring.c | 20 ++ src/util/virstring.h | 1 + tests/qemumonitorjsontest.c | 2 +- tests/virstoragetest.c | 450 +++++++++++++++++++++------------- tools/virsh-domain.c | 29 ++- tools/virsh.pod | 10 +- 23 files changed, 883 insertions(+), 299 deletions(-) -- 1.9.3

2 25

[libvirt] [PATCH RFC 0/3] allow setting video ram size for graphics
by Wangrui (K) 13 Jun '14

13 Jun '14

https://bugzilla.redhat.com/show_bug.cgi?id=1076098 Zeng Junliang (3): For vga/cirrus/vmvga/qxl device, qemu supports commandline parameter "vgamem_mb" to specifie the size of the framebuffer portion of the "ram" region. As the vram attribute in libvirt is only valid for qxl device in KVM/QEMU to specifie the total size of the "vram" region, we expect a new attribute in libvirt. The following patches introduce "vgamem" attribute to make vgamem_mb configurable in libvirt xml. qemu: Introduce vgamem attribute for video model tests: modify test case related to vgamem attribute docs: add description for vgamem attribute docs/formatdomain.html.in | 24 +++++-- docs/schemas/domaincommon.rng | 5 ++ src/conf/domain_conf.c | 44 +++++++++++- src/conf/domain_conf.h | 3 +- src/libvirt_private.syms | 1 + src/qemu/qemu_command.c | 79 +++++++++++++++------- .../domain-parallels-ct-simple.xml | 2 +- .../domain-parallels-vm-simple.xml | 2 +- ...qemuhotplug-console-compat-2+console-virtio.xml | 2 +- .../qemuxml2argv-console-compat-2.xml | 2 +- .../qemuxml2argv-controller-order.xml | 2 +- .../qemuxml2argv-graphics-listen-network.xml | 2 +- .../qemuxml2argv-graphics-listen-network2.xml | 2 +- .../qemuxml2argv-graphics-sdl-fullscreen.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml | 2 +- ...emuxml2argv-graphics-spice-agent-file-xfer.args | 5 +- ...qemuxml2argv-graphics-spice-agent-file-xfer.xml | 4 +- .../qemuxml2argv-graphics-spice-agentmouse.xml | 2 +- .../qemuxml2argv-graphics-spice-compression.args | 4 +- .../qemuxml2argv-graphics-spice-compression.xml | 4 +- .../qemuxml2argv-graphics-spice-listen-network.xml | 4 +- .../qemuxml2argv-graphics-spice-qxl-vga.args | 3 +- .../qemuxml2argv-graphics-spice-qxl-vga.xml | 4 +- .../qemuxml2argv-graphics-spice-sasl.args | 3 +- .../qemuxml2argv-graphics-spice-sasl.xml | 2 +- .../qemuxml2argv-graphics-spice-timeout.xml | 2 +- .../qemuxml2argv-graphics-spice.args | 5 +- .../qemuxml2argv-graphics-spice.xml | 4 +- .../qemuxml2argv-graphics-vnc-policy.xml | 2 +- .../qemuxml2argv-graphics-vnc-sasl.xml | 2 +- .../qemuxml2argv-graphics-vnc-socket.xml | 2 +- .../qemuxml2argv-graphics-vnc-tls.xml | 2 +- .../qemuxml2argv-graphics-vnc-websocket.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml | 2 +- .../qemuxml2argv-net-bandwidth.xml | 2 +- .../qemuxml2argv-pci-autoadd-addr.xml | 2 +- .../qemuxml2argv-pci-autoadd-idx.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-pci-bridge.xml | 2 +- .../qemuxml2argv-pcihole64-q35.args | 3 +- .../qemuxml2argv-pcihole64-q35.xml | 2 +- .../qemuxml2argvdata/qemuxml2argv-pseries-disk.xml | 2 +- tests/qemuxml2argvdata/qemuxml2argv-q35.args | 3 +- tests/qemuxml2argvdata/qemuxml2argv-q35.xml | 2 +- .../qemuxml2argv-serial-spiceport.args | 3 +- .../qemuxml2argv-serial-spiceport.xml | 2 +- .../qemuxml2argv-video-device-pciaddr-default.args | 9 ++- .../qemuxml2argv-video-device-pciaddr-default.xml | 6 +- .../qemuxml2xmlout-graphics-listen-network2.xml | 2 +- .../qemuxml2xmlout-graphics-spice-timeout.xml | 2 +- .../qemuxml2xmlout-pci-autoadd-addr.xml | 2 +- .../qemuxml2xmlout-pci-autoadd-idx.xml | 2 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml | 2 +- tests/xml2vmxdata/xml2vmx-esx-in-the-wild-6.xml | 2 +- tests/xml2vmxdata/xml2vmx-fusion-in-the-wild-1.xml | 2 +- tests/xml2vmxdata/xml2vmx-svga.xml | 2 +- tests/xml2vmxdata/xml2vmx-ws-in-the-wild-1.xml | 2 +- tests/xml2vmxdata/xml2vmx-ws-in-the-wild-2.xml | 2 +- 57 files changed, 197 insertions(+), 95 deletions(-) -- 1.7.12.4

2 2

[libvirt] [PATCH v2 0/4] Expose link state & speed
by Michal Privoznik 13 Jun '14

13 Jun '14

While the 1/4 was ACKed, I'm sending int for completeness. And I've made a tiny change: the link speed is no longer unsigned long but unsigned int instead. That'll do too and it consumes less memory. Michal Privoznik (4): virInterface: Expose link state & speed virnetdev: Introduce virNetDevGetLinkInfo interface_backend_udev: Implement link speed & state node_device: Expose link state & speed docs/formatnode.html.in | 6 ++ docs/schemas/basictypes.rng | 25 ++++++ docs/schemas/interface.rng | 1 + docs/schemas/nodedev.rng | 1 + src/Makefile.am | 4 +- src/conf/device_conf.c | 62 ++++++++++++++ src/conf/device_conf.h | 27 +++++- src/conf/interface_conf.c | 11 ++- src/conf/interface_conf.h | 2 + src/conf/node_device_conf.c | 7 +- src/conf/node_device_conf.h | 2 + src/interface/interface_backend_udev.c | 5 ++ src/libvirt_private.syms | 5 ++ src/node_device/node_device_driver.c | 11 ++- src/node_device/node_device_udev.c | 5 ++ src/util/virnetdev.c | 104 ++++++++++++++++++++++++ src/util/virnetdev.h | 6 ++ tests/interfaceschemadata/bridge-no-address.xml | 1 + tests/interfaceschemadata/bridge.xml | 1 + tests/interfaceschemadata/ethernet-dhcp.xml | 1 + 20 files changed, 280 insertions(+), 7 deletions(-) -- 2.0.0

5 25