- Devel - libvirt List Archives

[libvirt] [PATCH v5 0/5] Introduce display of IOThreads Information
by John Ferlan 11 Mar '15

11 Mar '15

Well technically this is the pinning API's, but keeping the subject the same for continuity sake. v4: http://www.redhat.com/archives/libvir-list/2015-March/msg00262.html Specifically replacing patches 5-9 Changes over v4 - remove the virDomainGetIOThreadPin related code leaving only the virDomainPinIOThread code. Will address jtomko's comments from 3/9 in a separate followup patch John Ferlan (5): Implement public API for virDomainPinIOThread remote: Implement the plumbing for virDomainPinIOThread domain: Introduce virDomainIOThreadsPin{Add|Del} qemu: Add support to pin IOThreads to specific CPU virsh: Add iothreadpin command include/libvirt/libvirt-domain.h | 14 +++ src/conf/domain_conf.c | 64 ++++++++++++ src/conf/domain_conf.h | 10 ++ src/driver-hypervisor.h | 8 ++ src/libvirt-domain.c | 76 ++++++++++++++ src/libvirt_private.syms | 2 + src/libvirt_public.syms | 1 + src/qemu/qemu_driver.c | 221 +++++++++++++++++++++++++++++++++++++++ src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 17 ++- src/remote_protocol-structs | 10 ++ src/rpc/gendispatch.pl | 1 + tools/virsh-domain.c | 106 +++++++++++++++++++ tools/virsh.pod | 26 +++++ 14 files changed, 556 insertions(+), 1 deletion(-) -- 2.1.0

3 18

[libvirt] [PATCHv2 0/4]add support for graphics to get a IPv6 address
by Luyao Huang 11 Mar '15

11 Mar '15

https://bugzilla.redhat.com/show_bug.cgi?id=1192318 We already support add a IPv6 address to graphics listen address and xml like this: <graphics type='spice' port='5900' autoport='yes' listen='2001b8:ca2:2::1' keymap='en-us'> <listen type='address' address='2001b8:ca2:2::1'/> </graphics> However we do not support get a IPv6 address for the network. add some helpers and rework networkGetNetworkAddress to make it can get a IPv6 address when we need. Luyao Huang (4): util: introduce 2 new helpers for get interface IPv6 address conf: introduce new family attribute in graphics listen for chose IP family network: rework networkGetNetworkAddress to make it can get IPv6 address qemu: fix a error coverd issue in 2 place docs/formatdomain.html.in | 10 ++- docs/schemas/domaincommon.rng | 8 ++ src/conf/domain_conf.c | 20 +++++ src/conf/domain_conf.h | 9 ++ src/libvirt_private.syms | 1 + src/network/bridge_driver.c | 15 ++-- src/network/bridge_driver.h | 6 +- src/qemu/qemu_command.c | 22 +++-- src/util/virnetdev.c | 98 ++++++++++++++++++++++ src/util/virnetdev.h | 4 + .../qemuxml2argv-graphics-listen-network-ipv6.xml | 35 ++++++++ .../qemuxml2argv-graphics-listen-network.xml | 2 +- .../qemuxml2xmlout-graphics-listen-network2.xml | 2 +- tests/qemuxml2xmltest.c | 1 + 14 files changed, 209 insertions(+), 24 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-listen-network-ipv6.xml -- 1.8.3.1

3 19

[libvirt] [PATCH 00/12] qemu: Refactor block stats gathering and implement summary stats
by Peter Krempa 11 Mar '15

11 Mar '15

Peter Krempa (12): qemu: Use macro to set block stats typed parameters qemu: monitor: Drop parsing of 'errs' from block info qemu: blockstats: Switch to caller allocated hash table test: qemu: Fix qemu monitor test utils to allow testing HMP qemu: monitor: Implement HMP version for listing all block device stats qemu: monitor: Convert common code to a macro qemu: monitor: Count block stats fields in qemuMonitorGetAllBlockStatsInfo qemu: Split out working code qemuDomainBlockStats qemu: blockstats: Add support for totalled block statistics qemu: blockstats: Refactor qemuDomainBlockStatsFlags test: qemu: json: Avoid using the now obsolete functions qemu: monitor: Kill qemuMonitorGetBlockStats(Info,ParamsNumber) src/qemu/qemu_driver.c | 299 ++++++++++++++++++++----------------------- src/qemu/qemu_monitor.c | 106 ++++++--------- src/qemu/qemu_monitor.h | 15 --- src/qemu/qemu_monitor_json.c | 233 ++++----------------------------- src/qemu/qemu_monitor_json.h | 15 +-- src/qemu/qemu_monitor_text.c | 256 ++++++++++++++---------------------- src/qemu/qemu_monitor_text.h | 16 +-- tests/Makefile.am | 8 +- tests/qemumonitorjsontest.c | 65 ++++------ tests/qemumonitortest.c | 89 ++++++++++++- tests/qemumonitortestutils.c | 3 +- tools/virsh.pod | 5 +- 12 files changed, 425 insertions(+), 685 deletions(-) -- 2.2.2

2 20

[libvirt] [libvirt-test-API][PATCH 0/2] Add test cases for setTime and getTime
by Jincheng Miao 11 Mar '15

11 Mar '15

create some test cases for libvirt-python API setTime and getTime Jincheng Miao (2): Add guest setTime and getTime testing Add test cases for linux_domain cases/linux_domain.conf | 26 +++++++++ repos/domain/guest_time.py | 98 ++++++++++++++++++++++++++++++++ repos/domain/set_guest_time.py | 122 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 0 deletions(-) create mode 100644 repos/domain/guest_time.py create mode 100644 repos/domain/set_guest_time.py

2 3

[libvirt] [PATCH] virnetdev: fix build with old kernel
by Pavel Hrdina 11 Mar '15

11 Mar '15

Commit c9027d8f added a detection of NIC HW features, but some of them are not available in old kernel. Very old kernels lack enum ethtool_flags and even if this enum is present, not all values are available for all kernels. To be sure that we have everything in kernel that we need, we must check for existence of newest value which is ETH_FLAG_TXVLAN. Only then we can be sure that the feature detection can be successfully built. Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- configure.ac | 6 ++++++ src/util/virnetdev.c | 6 ++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/configure.ac b/configure.ac index e071813..3cffb84 100644 --- a/configure.ac +++ b/configure.ac @@ -383,6 +383,12 @@ AC_CHECK_TYPE([struct ifreq], #include <net/if.h> ]]) +AC_CHECK_DECL([ETH_FLAG_TXVLAN], + [AC_DEFINE([HAVE_ETH_FLAG_TXVLAN],[1], + [Defined if ETH_FLAG_TXVLAN exists in linux/ethtool.h])], + [], [[#include <linux/ethtool.h> + ]]) + dnl Our only use of libtasn1.h is in the testsuite, and can be skipped dnl if the header is not present. Assume -ltasn1 is present if the dnl header could be found. diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c index 971db43..7519579 100644 --- a/src/util/virnetdev.c +++ b/src/util/virnetdev.c @@ -47,7 +47,8 @@ # undef HAVE_STRUCT_IFREQ #endif -#if defined(SIOCETHTOOL) && defined(HAVE_STRUCT_IFREQ) +#if defined(SIOCETHTOOL) && defined(HAVE_STRUCT_IFREQ) && \ + defined(HAVE_ETH_FLAG_TXVLAN) # include <linux/ethtool.h> #endif @@ -2733,7 +2734,8 @@ int virNetDevGetRxFilter(const char *ifname, return ret; } -#if defined(SIOCETHTOOL) && defined(HAVE_STRUCT_IFREQ) +#if defined(SIOCETHTOOL) && defined(HAVE_STRUCT_IFREQ) && \ + defined(HAVE_ETH_FLAG_TXVLAN) /** * virNetDevFeatureAvailable -- 2.0.5

3 2

[libvirt] [PATCH] RNG: Allow multiple parameters to be passed to an interface filter
by Michal Privoznik 11 Mar '15

11 Mar '15

Our code supports that for ages. When using a <filterref/> to an <interface/> several parameters can be passed to the filter. Later, when building firewall rules, parameters are substituted for their values. However, our RNG schema allowed only one parameter to be passed. Reported-by: Brian Rak <brak(a)gameservers.com> Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- docs/schemas/domaincommon.rng | 4 +- .../domain-qemu-interface-filterref.xml | 170 +++++++++++++++++++++ 2 files changed, 172 insertions(+), 2 deletions(-) create mode 100644 tests/domainschemadata/domain-qemu-interface-filterref.xml diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 56ea6a4..b1d883f 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -4530,7 +4530,7 @@ <attribute name="filter"> <data type="NCName"/> </attribute> - <optional> + <zeroOrMore> <element name="parameter"> <attribute name="name"> <ref name="filter-param-name"/> @@ -4539,7 +4539,7 @@ <ref name="filter-param-value"/> </attribute> </element> - </optional> + </zeroOrMore> </define> <define name="deviceBoot"> diff --git a/tests/domainschemadata/domain-qemu-interface-filterref.xml b/tests/domainschemadata/domain-qemu-interface-filterref.xml new file mode 100644 index 0000000..0aa0c99 --- /dev/null +++ b/tests/domainschemadata/domain-qemu-interface-filterref.xml @@ -0,0 +1,170 @@ +<domain type='kvm'> + <name>gentoo</name> + <uuid>a75aca4b-a02f-2bcb-4a91-c93cd848c34b</uuid> + <memory unit='KiB'>4194304</memory> + <currentMemory unit='KiB'>4194304</currentMemory> + <memoryBacking> + <hugepages> + <page size='1048576' unit='KiB' nodeset='0-3'/> + </hugepages> + </memoryBacking> + <vcpu placement='static'>4</vcpu> + <os> + <type arch='x86_64' machine='pc-i440fx-1.4'>hvm</type> + <boot dev='hd'/> + <boot dev='cdrom'/> + </os> + <features> + <acpi/> + <apic/> + <pae/> + </features> + <cpu mode='custom' match='exact'> + <model fallback='allow'>Haswell</model> + <vendor>Intel</vendor> + <feature policy='require' name='tm2'/> + <feature policy='require' name='est'/> + <feature policy='require' name='vmx'/> + <feature policy='require' name='osxsave'/> + <feature policy='require' name='smx'/> + <feature policy='require' name='ss'/> + <feature policy='require' name='ds'/> + <feature policy='require' name='vme'/> + <feature policy='require' name='dtes64'/> + <feature policy='require' name='abm'/> + <feature policy='require' name='ht'/> + <feature policy='require' name='acpi'/> + <feature policy='require' name='pbe'/> + <feature policy='require' name='tm'/> + <feature policy='require' name='pdcm'/> + <feature policy='require' name='pdpe1gb'/> + <feature policy='require' name='ds_cpl'/> + <feature policy='require' name='rdrand'/> + <feature policy='require' name='f16c'/> + <feature policy='require' name='xtpr'/> + <feature policy='require' name='monitor'/> + <numa> + <cell id='0' cpus='0' memory='1048576' unit='KiB'/> + <cell id='1' cpus='1' memory='1048576' unit='KiB'/> + <cell id='2' cpus='2' memory='1048576' unit='KiB'/> + <cell id='3' cpus='3' memory='1048576' unit='KiB'/> + </numa> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <pm> + <suspend-to-mem enabled='yes'/> + <suspend-to-disk enabled='yes'/> + </pm> + <devices> + <emulator>/usr/bin/qemu-system-x86_64</emulator> + <disk type='file' device='floppy'> + <driver name='qemu' type='raw' cache='none'/> + <source file='/var/lib/libvirt/images/fd.img'/> + <target dev='fda' bus='fdc'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <disk type='file' device='disk'> + <driver name='qemu' type='qcow2'/> + <source file='/var/lib/libvirt/images/gentoo.qcow2'/> + <target dev='vda' bus='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> + </disk> + <disk type='file' device='disk'> + <driver name='qemu' type='qcow2'/> + <source file='/var/lib/libvirt/images/OtherDemo.img'/> + <target dev='vdb' bus='virtio'/> + <encryption format='qcow'> + <secret type='passphrase' uuid='e78d4b51-a2af-485f-b0f5-afca709a80f4'/> + </encryption> + <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> + </disk> + <disk type='file' device='cdrom'> + <driver name='qemu' type='raw' cache='none'/> + <source file='/home/zippy/tmp/install-amd64-minimal-20140619.iso'/> + <target dev='hdc' bus='ide'/> + <readonly/> + <shareable/> + <address type='drive' controller='0' bus='1' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <controller type='ide' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> + </controller> + <controller type='virtio-serial' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> + </controller> + <controller type='fdc' index='0'/> + <interface type='network'> + <mac address='52:54:00:d6:c0:0b'/> + <source network='default'/> + <bandwidth> + <inbound average='100'/> + <outbound average='100'/> + </bandwidth> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> + </interface> + <interface type='bridge'> + <mac address='52:54:00:35:82:59'/> + <source bridge='br0'/> + <model type='rtl8139'/> + <filterref filter='myfilter'> + <parameter name='CTRL_IP_LEARNING' value='none'/> + <parameter name='DHCPSERVER' value='104.156.226.10'/> + <parameter name='IP' value='104.207.129.11'/> + <parameter name='IP6_ADDR' value='2001:19f0:300:2102::'/> + <parameter name='IP6_MASK' value='64'/> + </filterref> + <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> + </interface> + <interface type='server'> + <mac address='52:54:00:22:c9:42'/> + <source address='127.0.0.1' port='1234'/> + <bandwidth> + <inbound average='1234'/> + <outbound average='5678'/> + </bandwidth> + <model type='rtl8139'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> + </interface> + <interface type='client'> + <mac address='52:54:00:8c:b1:f8'/> + <source address='127.0.0.1' port='1234'/> + <model type='rtl8139'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> + </interface> + <serial type='pty'> + <target port='0'/> + </serial> + <serial type='pty'> + <target port='1'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <channel type='unix'> + <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/gentoo.org.qemu.guest_agent.0'/> + <target type='virtio' name='org.qemu.guest_agent.0'/> + <address type='virtio-serial' controller='0' bus='0' port='1'/> + </channel> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes'/> + <sound model='ich6'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </sound> + <video> + <model type='cirrus' vram='16384' heads='1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='virtio'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> + </memballoon> + </devices> +</domain> -- 2.0.5

2 1

[libvirt] [PATCH 0/4] parallels: fix different domain define parameters
by Maxim Nestratov 11 Mar '15

11 Mar '15

Actually our checking for unsupported parameters is too strict about cpumask, vcpupin and NUMA parameters and in general wrong. First of all, we do support cpumask and consequently we don't have to prevent domain definition in case cpumask is specified. Also we should allow vcpupin parameters if they don't contradict with common cpumask. NUMA checking was also wrong because def->numa is always allocated. Here we check that its content is not specified. Maxim Nestratov (4): parallels: cpumask support parallels: don't forget to unlock domain in parallelsDomainHasManagedSaveImage parallels: prevent domain define only if NUMA is really specified parallels: prevent domain define only if vcpupin is specified

2 8

[libvirt] [libvirt-test-API][PATCH 0/2] Add securitylabel test case
by jiahu 11 Mar '15

11 Mar '15

The test case will check securityLabel() and securityLabelList() APIs. jiahu (2): Add securitylabel test case to linux_domain.conf Add securitylabel test case cases/linux_domain.conf | 4 + repos/domain/securitylabel.py | 170 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 174 insertions(+) create mode 100644 repos/domain/securitylabel.py -- 1.8.3.1

2 3

[libvirt] [PATCH v3 0/5] Add support for graphics to get a IPv6 address
by John Ferlan 11 Mar '15

11 Mar '15

Update to Luyao's series - figured I'd repost just to make it easier rather than continued replies... v2 here: http://www.redhat.com/archives/libvir-list/2015-February/msg01228.html Changes since v2: * Split patch 1 into two parts - one to create the IPAddress shim that just calls the existing (and now static) IPv4 code. * Adjust remainder of patches according to my review comments (hopefully and thus why I'm reposting) John Ferlan (1): util: Replace virNetDevGetIPv4Address with virNetDevGetIPAddress Luyao Huang (4): util: Update virNetDevGetIPAddress to add IPv6 boolean conf: Add 'family' attribute to <graphics> 'listen' element network: Allow networkGetNetworkAddress to return IPv6 address qemu: Remove unnecessary virReportError on networkGetNetworkAddress return docs/formatdomain.html.in | 14 ++- docs/schemas/domaincommon.rng | 8 ++ src/conf/domain_conf.c | 21 ++++ src/conf/domain_conf.h | 10 ++ src/libvirt_private.syms | 2 +- src/network/bridge_driver.c | 17 +-- src/network/bridge_driver.h | 6 +- src/qemu/qemu_command.c | 22 ++-- src/util/virnetdev.c | 121 +++++++++++++++++++-- src/util/virnetdev.h | 7 +- .../qemuxml2argv-graphics-listen-network-ipv4.xml | 35 ++++++ .../qemuxml2argv-graphics-listen-network-ipv6.xml | 35 ++++++ tests/qemuxml2xmltest.c | 2 + 13 files changed, 263 insertions(+), 37 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-listen-network-ipv4.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-graphics-listen-network-ipv6.xml -- 2.1.0

2 10

[libvirt] [libvirt-test-API][PATCH V2 0/2] Add freepages test cases
by Jincheng Miao 11 Mar '15

11 Mar '15

Add freepages test cases. V2: Assign ps.strip().upper() to ps variable in free_page.py Jincheng Miao (2): Add freepage test Add freepage test case to test_connection.conf cases/test_connection.conf | 6 +++ repos/virconn/free_pages.py | 97 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 103 insertions(+), 0 deletions(-) create mode 100644 repos/virconn/free_pages.py

3 4