- Devel - libvirt List Archives

[libvirt] [PATCH] conf: fix issue on virCPUDefCopy
by Thibaut Collet 22 May '15

22 May '15

This patch is only for maintenance branches v1.2.9-maint, v1.2.10-maint, v1.2.11-maint and v1.2.12-maint Thibaut Collet (1): conf: fix issue on virCPUDefCopy src/conf/cpu_conf.c | 1 + 1 file changed, 1 insertion(+) -- 1.7.10.4

2 2

[libvirt] [RFC PATCH 0/2] Clear capabilities cache options
by John Ferlan 22 May '15

22 May '15

Posting this as an RFC since I'm trying to get upstream feedback on whether either approach is better or whether perhaps both approaches should be used. The problem occurred primarily for downstream installations where it seems the order of the build libvirtd caused issues regarding whether certain capabilities bits were present. Although the history of the case doesn't "prove" my theory exactly other issues around the same time that were part of a private bz or email stream (I forget now) seem to indicate that the order of libvirtd builds and installations would be very important as they relate to when the cache is rebuilt. In the instances seen there was lots of testing going on related to whether patches were found in a 'maintenance release' and the 'mainline release'. Since the process is build the mainline first and then backport the patch(es) to the maintenance release, it's possible the date of the maintenance libvirtd would be later than that of the mainline release. If testing installs the maintenance release first and the cache gets updated based on the 'ctime' of libvirtd being later than what was currently installed and then the mainline release is installed with a libvirtd 'ctime' that would possibly be prior to that of the maintentance release, then the cache wouldn't be updated. The fix for testing has been just to delete the cache. In looking at the code and history, I see a couple possible solutions. The first seems to be a "big hammer" - on every libvirtd installation we delete the entire cache - this would force the reread. I believe I got that right using %post of the install to clear out anything in the capabilities directory (whether just created or already existing from some prior installation). Another solution was to adjust the libvirtd 'ctime' check to be if different than what is found in the cache. When looking at the original commit, this seems to be what the intention was in the commit message, but the actual code was slightly different. Upstream review comments for changes didn't mention the difference either, see: http://www.redhat.com/archives/libvir-list/2014-March/msg00629.html and https://www.redhat.com/archives/libvir-list/2014-March/msg00301.html John Ferlan (2): spec: Remove capabilities cache during %post install qemu: Force capabilities cache read if libvirtd date is different libvirt.spec.in | 11 +++++++++++ src/qemu/qemu_capabilities.c | 6 ++++-- 2 files changed, 15 insertions(+), 2 deletions(-) -- 2.1.0

4 15

[libvirt] RFC: exposing qemu's block-set-write-threshold
by Eric Blake 22 May '15

22 May '15

I'm trying to wire up libvirt to do event reporting based on qemu 2.3's BLOCK_WRITE_THRESHOLD event. Doing this will allow management applications to do event-based notification on when to enlarge LVM (or other) storage underlying a qcow2 volume, rather than their current requirement to frequently poll block statistics. But I'm stuck on the best way to expose the new parameter: One idea is to treat it as part of the domain XML, and have virDomainSetBlockIoTune add one more typed parameter for a disk's current write threshold. Doing this could allow setting a threshold even for an offline domain (although the threshold is only meaningful for a running domain), but might get weird because qemu's event is one-shot (you have to re-arm a new threshold every time an existing threshold fires - so every time it fires, the domain XML is rewritten, even though it is not guest-visible ABI that was changing). At least with this approach, it is also easy for a client to poll the current setting of the threshold, via virDomainGetBlockIoTune. But the threshold isn't quite a tuning parameter (it isn't throttling how fast the guest can write to the block device, only how full the host side can get in order to allow transparent resizing of the host storage prior to running out of space). Another idea is to add a completely new API, maybe named virDomainBlockSetWriteThreshold(virDomainPtr dom, const char *disk, long long int threshold, unsigned int flags) (with threshold in bytes). Here, virDomainBlockStatsFlags() could be a way to query the current threshold. And if desired, we could add a flag value to treat threshold as a percentage instead of a byte value (but is 1% too large of granularity, and how would you scale the percentage to anything finer while still keeping the parameter as long long int rather than double?) Of course, I'd want virConnectGetAllDomainStats() to list the current threshold setting (0 if no threshold or if the event has already fired, non-zero if the threshold is still set waiting to fire), so that clients can query thresholds for multiple domains and multiple disks per domain in one API call. But I don't know if we have any good way to set multiple thresholds in one call (at least virDomainSetBlockIoTune must be called once per disk; it might be possible for my proposed virDomainBlockStatsFlags() to set a threshold for multiple disks if the disk name is passed as NULL - but then we're back to the question of what happens if the guest has multiple disks of different sizes; it's better to set per-disk thresholds than to assume all disks must be at the same byte or percentage threshold). I'm also worried about what happens across libvirtd restarts - if the qemu event fires while libvirtd is unconnected, should libvirt be tracking that a threshold was registered in the XML, and upon reconnection check if qemu still has the threshold? If qemu no longer has a threshold, then libvirt can assume it missed the event, and generate one as part of reconnecting to the domain. Thoughts? If I don't hear anything, I'll base my first implementation on adding a new API, rather than reusing virDomainSetBlockIoTune. -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org

4 8

[libvirt] [PATCH] conf: fix forget restore ctxt->node when parse memory device success
by Luyao Huang 22 May '15

22 May '15

https://bugzilla.redhat.com/show_bug.cgi?id=1223631 When set a memory device in the xml, <sysinfo> in xml will be lost. Because we forgot restore ctxt->node to the oldnode after parse memory device, this will make the parse function after virDomainMemoryDefParseXML cannot find a node they need when parse a full xml(virDomainDefParseXML). Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- src/conf/domain_conf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index bfdc94e..7ddc1ea 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -11828,6 +11828,7 @@ virDomainMemoryDefParseXML(xmlNodePtr memdevNode, if (virDomainDeviceInfoParseXML(memdevNode, NULL, &def->info, flags) < 0) goto error; + ctxt->node = save; return def; error: -- 1.8.3.1

4 4

[libvirt] [PATCH] virsh: fix a typos issue cause error not right
by Luyao Huang 22 May '15

22 May '15

Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- tools/virsh-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/virsh-host.c b/tools/virsh-host.c index a72fd05..e939dac 100644 --- a/tools/virsh-host.c +++ b/tools/virsh-host.c @@ -500,7 +500,7 @@ cmdAllocpages(vshControl *ctl, const vshCmd *cmd) if (vshCommandOptScaledInt(cmd, "pagesize", &tmp, 1024, UINT_MAX) < 0) { vshError(ctl, _("Numeric value for <%s> option is malformed or out of range"), - "cellno"); + "pagesize"); return false; } pageSizes[0] = VIR_DIV_UP(tmp, 1024); -- 1.8.3.1

3 2

[libvirt] [PATCH v2 0/5] storage: fs: tweak dir perms handling on build
by Cole Robinson 21 May '15

21 May '15

Consider the following issue - Using virt-manager with qemu:///session - User adds a storage pool pointing at /tmp. No explicit permissions are requested in the XML - virt-manager calls PoolDefine, then PoolBuild - libvirt tries to unconditionally chmod 755 /tmp. This fails because my user doesn't own root. Pool build fails, virt-manager reports failure Yes there's a couple ways we could avoid this specific case in virt-manager, but I think it makes more sense to have pool.build on a directory be a no-op in this case. The following patches address this. I already pushed some bits of v1 of the series. Now the patches are: - Patch 1 (new) fixes a bug in the previous patches I pushed - Patch 2 (new) changes storage XML to not output -1 for owner/group - Patch 3 changes storage XML to not hardcode a <mode> value if the user didn't specify one in. - Patch 4 (new) drops a redundant flag to virDirCreate - Patch 5 makes pool.build skip dir chmod unless the user explicitly requested <mode> via the XML. However if a mode is required for mkdir, continue to use the previous default. v2: Add patches 1, 3, 4, adjust other patches to match Style fix in patch 5 Cole Robinson (5): virfile: virDirCreate: Fix ALLOW_EXIST conditional storage: conf: Don't output owner/group -1 storage: conf: Don't set any default <mode> in the XML virfile: virDirCreate: Drop redundand FORCE_PERMS flag storage: fs: Only force directory permissions if required docs/schemas/storagecommon.rng | 36 ++++++++------ src/conf/storage_conf.c | 57 +++++++++++----------- src/storage/storage_backend.c | 20 ++++++-- src/storage/storage_backend.h | 3 ++ src/storage/storage_backend_fs.c | 21 +++++--- src/storage/storage_backend_logical.c | 4 +- src/util/virfile.c | 8 ++- src/util/virfile.h | 3 +- tests/storagepoolxml2xmlout/pool-dir-naming.xml | 2 - tests/storagepoolxml2xmlout/pool-dir.xml | 2 - tests/storagepoolxml2xmlout/pool-netfs-gluster.xml | 3 -- tests/storagevolxml2xmlin/vol-file.xml | 4 +- .../vol-gluster-dir-neg-uid.xml | 2 - tests/storagevolxml2xmlout/vol-gluster-dir.xml | 3 -- tests/storagevolxml2xmlout/vol-sheepdog.xml | 3 -- 15 files changed, 91 insertions(+), 80 deletions(-) -- 2.4.0

4 15

[libvirt] [PATCH] build fix: fix libvirt build if WITH_HAL is defined
by Maxim Nestratov 21 May '15

21 May '15

--- src/node_device/node_device_hal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/node_device/node_device_hal.c b/src/node_device/node_device_hal.c index 2d3bc17..6d18a87 100644 --- a/src/node_device/node_device_hal.c +++ b/src/node_device/node_device_hal.c @@ -372,7 +372,7 @@ gather_capability(LibHalContext *ctx, const char *udi, virNodeDevCapsDefPtr caps; if (VIR_ALLOC(caps) < 0) return ENOMEM; - caps->type = entry->type; + caps->data.type = entry->type; if (entry->gather_fn) { int rv = (*entry->gather_fn)(ctx, udi, &caps->data); if (rv != 0) { -- 2.1.0

2 1

[libvirt] [PATCH v2] sysinfo: Fix reports on ARM
by Michal Privoznik 21 May '15

21 May '15

Due to a kernel commit (b4b8f770e), cpuinfo format has changed on ARMs. Firstly, 'Processor: ...' may not be reported, it's replaced by 'model name: ...'. Secondly, the "Processor" string may occur in CPU name, e.g. 'ARMv7 Processor rev 5 (v7l)'. Therefore, we must firstly look for 'model name' and then for 'Processor' if not found. Moreover, lines in the cpuinfo file are shuffled, so we better not manipulate the pointer to start of internal buffer as we may lost some info. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- diff to v1: - Jan's comments worked in - added new test case (yes, there really is a space at EOL in cpuinfo on my ARM) src/util/virsysinfo.c | 9 +++---- tests/sysinfodata/arm-rpi2cpuinfo.data | 43 ++++++++++++++++++++++++++++++++ tests/sysinfodata/arm-rpi2sysinfo.expect | 18 +++++++++++++ tests/sysinfotest.c | 22 ++++++++++++---- 4 files changed, 82 insertions(+), 10 deletions(-) create mode 100644 tests/sysinfodata/arm-rpi2cpuinfo.data create mode 100644 tests/sysinfodata/arm-rpi2sysinfo.expect diff --git a/src/util/virsysinfo.c b/src/util/virsysinfo.c index 8bb17f0..40390ab 100644 --- a/src/util/virsysinfo.c +++ b/src/util/virsysinfo.c @@ -289,16 +289,15 @@ virSysinfoParseProcessor(const char *base, virSysinfoDefPtr ret) virSysinfoProcessorDefPtr processor; char *processor_type = NULL; - if (!(tmp_base = strstr(base, "Processor"))) + if (!(tmp_base = strstr(base, "model name")) && + !(tmp_base = strstr(base, "Processor"))) return 0; - base = tmp_base; - eol = strchr(base, '\n'); - cur = strchr(base, ':') + 1; + eol = strchr(tmp_base, '\n'); + cur = strchr(tmp_base, ':') + 1; virSkipSpaces(&cur); if (eol && VIR_STRNDUP(processor_type, cur, eol - cur) < 0) goto error; - base = cur; while ((tmp_base = strstr(base, "processor")) != NULL) { base = tmp_base; diff --git a/tests/sysinfodata/arm-rpi2cpuinfo.data b/tests/sysinfodata/arm-rpi2cpuinfo.data new file mode 100644 index 0000000..41fde00 --- /dev/null +++ b/tests/sysinfodata/arm-rpi2cpuinfo.data @@ -0,0 +1,43 @@ +processor : 0 +model name : ARMv7 Processor rev 5 (v7l) +BogoMIPS : 38.40 +Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +CPU implementer : 0x41 +CPU architecture: 7 +CPU variant : 0x0 +CPU part : 0xc07 +CPU revision : 5 + +processor : 1 +model name : ARMv7 Processor rev 5 (v7l) +BogoMIPS : 38.40 +Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +CPU implementer : 0x41 +CPU architecture: 7 +CPU variant : 0x0 +CPU part : 0xc07 +CPU revision : 5 + +processor : 2 +model name : ARMv7 Processor rev 5 (v7l) +BogoMIPS : 38.40 +Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +CPU implementer : 0x41 +CPU architecture: 7 +CPU variant : 0x0 +CPU part : 0xc07 +CPU revision : 5 + +processor : 3 +model name : ARMv7 Processor rev 5 (v7l) +BogoMIPS : 38.40 +Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +CPU implementer : 0x41 +CPU architecture: 7 +CPU variant : 0x0 +CPU part : 0xc07 +CPU revision : 5 + +Hardware : BCM2709 +Revision : a01041 +Serial : 00000000c9e9323d diff --git a/tests/sysinfodata/arm-rpi2sysinfo.expect b/tests/sysinfodata/arm-rpi2sysinfo.expect new file mode 100644 index 0000000..acb3ad9 --- /dev/null +++ b/tests/sysinfodata/arm-rpi2sysinfo.expect @@ -0,0 +1,18 @@ +<sysinfo type='smbios'> + <processor> + <entry name='socket_destination'>0</entry> + <entry name='type'>ARMv7 Processor rev 5 (v7l)</entry> + </processor> + <processor> + <entry name='socket_destination'>1</entry> + <entry name='type'>ARMv7 Processor rev 5 (v7l)</entry> + </processor> + <processor> + <entry name='socket_destination'>2</entry> + <entry name='type'>ARMv7 Processor rev 5 (v7l)</entry> + </processor> + <processor> + <entry name='socket_destination'>3</entry> + <entry name='type'>ARMv7 Processor rev 5 (v7l)</entry> + </processor> +</sysinfo> diff --git a/tests/sysinfotest.c b/tests/sysinfotest.c index d8266a7..74e5f71 100644 --- a/tests/sysinfotest.c +++ b/tests/sysinfotest.c @@ -166,11 +166,23 @@ VIRT_TEST_MAIN(test_x86) static int test_arm(void) { - return sysinfotest_run("arm sysinfo", - NULL, - NULL, - "/sysinfodata/armcpuinfo.data", - "/sysinfodata/armsysinfo.expect"); + int ret = EXIT_SUCCESS; + + if (sysinfotest_run("arm sysinfo", + NULL, + NULL, + "/sysinfodata/armcpuinfo.data", + "/sysinfodata/armsysinfo.expect") != EXIT_SUCCESS) + ret = EXIT_FAILURE; + + if (sysinfotest_run("Raspberry Pi 2 sysinfo", + NULL, + NULL, + "/sysinfodata/arm-rpi2cpuinfo.data", + "/sysinfodata/arm-rpi2sysinfo.expect") != EXIT_SUCCESS) + ret = EXIT_FAILURE; + + return ret; } VIRT_TEST_MAIN(test_arm) -- 2.3.6

3 2

[libvirt] [PATCH] util: Avoid shadow of 'ulong' in virMemoryMaxValue
by Peter Krempa 21 May '15

21 May '15

Old compilers whine: src/util/virutil.c: In function 'virMemoryMaxValue': src/util/virutil.c:2612: error: declaration of 'ulong' shadows a global declaration [-Wshadow] /usr/include/sys/types.h:151: error: shadowed declaration is here [-Wshadow] s/ulong/capped/ to work around the problem ---1 Pushed under the trivial && build-breaker rules. src/util/virutil.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/util/virutil.c b/src/util/virutil.c index 638d6e2..e479cce 100644 --- a/src/util/virutil.c +++ b/src/util/virutil.c @@ -2603,17 +2603,17 @@ virMemoryLimitIsSet(unsigned long long value) /** * virMemoryMaxValue * - * @ulong: whether the value must fit into unsigned long + * @capped: whether the value must fit into unsigned long * (long long is assumed otherwise) * * Returns the maximum possible memory value in bytes. */ unsigned long long -virMemoryMaxValue(bool ulong) +virMemoryMaxValue(bool capped) { /* On 32-bit machines, our bound is 0xffffffff * KiB. On 64-bit * machines, our bound is off_t (2^63). */ - if (ulong && sizeof(unsigned long) < sizeof(long long)) + if (capped && sizeof(unsigned long) < sizeof(long long)) return 1024ull * ULONG_MAX; else return LLONG_MAX; -- 2.3.5

1 0

[libvirt] [PATCH 0/3] Support changing user passwords in the guest
by Ján Tomko 21 May '15

21 May '15

The guest-set-user-password command was added to qemu-agent in the 2.3.0 release by Daniel Berrange (some of you might have heard of him): commit 215a2771a7b6b29037ee8deba484815d816b6fdd qga: add guest-set-user-password command http://git.qemu.org/?p=qemu.git;a=commitdiff;h=215a277 This mini-series introduces a libvirt API, set_password ACL, a virsh command and wires up the API in the QEMU driver. Any bikesh^Wsuggestions regarding the API naming and the order of the virsh parameters are welcome. Ján Tomko (3): Introduce virDomainSetUserPassword API virsh: add set-user-password command qemu: wire up virDomainSetUserPassword include/libvirt/libvirt-domain.h | 9 +++++ src/access/viraccessperm.c | 2 +- src/access/viraccessperm.h | 6 ++++ src/driver-hypervisor.h | 7 ++++ src/libvirt-domain.c | 47 +++++++++++++++++++++++++ src/libvirt_public.syms | 5 +++ src/qemu/qemu_agent.c | 39 +++++++++++++++++++++ src/qemu/qemu_agent.h | 4 +++ src/qemu/qemu_driver.c | 55 +++++++++++++++++++++++++++++ src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 15 +++++++- src/remote_protocol-structs | 7 ++++ tools/virsh-domain.c | 76 ++++++++++++++++++++++++++++++++++++++++ tools/virsh.pod | 11 ++++++ 14 files changed, 282 insertions(+), 2 deletions(-) -- 2.0.5

3 9