- Devel - libvirt List Archives

[libvirt] [PATCH] conf:audit: fix no audit log when start a vm with iothread
by Luyao Huang 03 Jun '15

03 Jun '15

Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- src/conf/domain_audit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/conf/domain_audit.c b/src/conf/domain_audit.c index 4ea10d2..1900039 100644 --- a/src/conf/domain_audit.c +++ b/src/conf/domain_audit.c @@ -885,6 +885,8 @@ virDomainAuditStart(virDomainObjPtr vm, const char *reason, bool success) virDomainAuditMemory(vm, 0, vm->def->mem.cur_balloon, "start", true); virDomainAuditVcpu(vm, 0, vm->def->vcpus, "start", true); + if (vm->def->iothreads) + virDomainAuditIOThread(vm, 0, vm->def->iothreads, "start", true); virDomainAuditLifecycle(vm, "start", reason, success); } -- 1.8.3.1

3 2

[libvirt] [PATCH] qemu: fix forget pass the return value to variable @ret
by Luyao Huang 03 Jun '15

03 Jun '15

If we do not pass the return value from qemuDomainRemoveRNGDevice() function to variable @ret, qemuDomainRemoveDevice() functiuon will always fail when recive rng device unplug event from qemu monitor. Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- src/qemu/qemu_hotplug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 170768b..f596730 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -3271,7 +3271,7 @@ qemuDomainRemoveDevice(virQEMUDriverPtr driver, ret = qemuDomainRemoveChrDevice(driver, vm, dev->data.chr); break; case VIR_DOMAIN_DEVICE_RNG: - qemuDomainRemoveRNGDevice(driver, vm, dev->data.rng); + ret = qemuDomainRemoveRNGDevice(driver, vm, dev->data.rng); break; case VIR_DOMAIN_DEVICE_MEMORY: -- 1.8.3.1

3 2

[libvirt] [PATCH] qemu: fix wrong call addressrelease function when attach RNG device success
by Luyao Huang 03 Jun '15

03 Jun '15

Add a return value check to avoid the wrong address release. Signed-off-by: Luyao Huang <lhuang(a)redhat.com> --- src/qemu/qemu_hotplug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 170768b..f70e3d8 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1695,7 +1695,7 @@ qemuDomainAttachRNGDevice(virQEMUDriverPtr driver, audit: virDomainAuditRNG(vm, NULL, rng, "attach", ret == 0); cleanup: - if (vm) + if (ret < 0 && vm) qemuDomainReleaseDeviceAddress(vm, &rng->info, NULL); VIR_FREE(charAlias); VIR_FREE(objAlias); -- 1.8.3.1

3 2

[libvirt] [PATCHv2] Always add 'console' matching the 'serial' device
by Ján Tomko 02 Jun '15

02 Jun '15

We have been formatting the first serial device also as a console device, but only if there were no other consoles. If there is a <serial> device present in the XML, but no serial <console>, or if there isn't any <console> at all but the domain definition hasn't gone through a parse->format->parse round-trip, the <console> device would not be formatted. Change the code to always add the stub device for the first serial device. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1089914 --- src/conf/domain_conf.c | 23 +++++++++++++ .../qemuxml2argv-console-compat2.xml | 35 ++++++++++++++++++++ .../qemuxml2xmlout-console-compat2.xml | 38 ++++++++++++++++++++++ tests/qemuxml2xmltest.c | 1 + 4 files changed, 97 insertions(+) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-console-compat2.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-console-compat2.xml diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 6e57425..ec8f9fa 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -3587,6 +3587,25 @@ virDomainDefPostParseInternal(virDomainDefPtr def, def->consoles[0]->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE; def->consoles[0]->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL; } + } else if (def->os.type == VIR_DOMAIN_OSTYPE_HVM && def->nserials > 0 && + def->serials[0]->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL && + def->serials[0]->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA) { + /* Create a stub console to match the serial port. + * console[0] either does not exist + * or has a different type than SERIAL or NONE. + */ + virDomainChrDefPtr chr; + if (VIR_ALLOC(chr) < 0) + return -1; + + if (VIR_INSERT_ELEMENT(def->consoles, + 0, + def->nconsoles, + chr) < 0) + return -1; + + def->consoles[0]->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE; + def->consoles[0]->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL; } if (virDomainDefRejectDuplicateControllers(def) < 0) @@ -21588,6 +21607,10 @@ virDomainDefFormatInternal(virDomainDefPtr def, if (virDomainChrDefFormat(buf, &console, flags) < 0) goto error; } + /* The back-compat console device stub is added when parsing the domain XML + * and handled above, this is for formatting definitions created via other + * means. + */ if (def->os.type == VIR_DOMAIN_OSTYPE_HVM && def->nconsoles == 0 && def->nserials > 0) { diff --git a/tests/qemuxml2argvdata/qemuxml2argv-console-compat2.xml b/tests/qemuxml2argvdata/qemuxml2argv-console-compat2.xml new file mode 100644 index 0000000..ded204a --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-console-compat2.xml @@ -0,0 +1,35 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <controller type='virtio-serial' index='0'/> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='virtio' port='0'/> + </console> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-console-compat2.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-console-compat2.xml new file mode 100644 index 0000000..636e984 --- /dev/null +++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-console-compat2.xml @@ -0,0 +1,38 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219100</memory> + <currentMemory unit='KiB'>219100</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='disk'> + <driver name='qemu' type='raw'/> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='hda' bus='ide'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='ide' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <controller type='virtio-serial' index='0'/> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <console type='pty'> + <target type='virtio' port='0'/> + </console> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index 53bcc9f..d405e71 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -472,6 +472,7 @@ mymain(void) DO_TEST("serial-spiceport-nospice"); DO_TEST("parallel-tcp"); DO_TEST("console-compat"); + DO_TEST_DIFFERENT("console-compat2"); DO_TEST("console-virtio-many"); DO_TEST("channel-guestfwd"); DO_TEST("channel-virtio"); -- 2.3.6

2 1

[libvirt] [PATCH] build: silence ar warnings on rawhide
by Eric Blake 02 Jun '15

02 Jun '15

Newer binutils 'ar' has added an option 'D' for deterministic builds, and at least on rawhide, this option is enabled by default. But it conflicts with the 'u' optimization where the linker only modifies libraries based on file timestamps, but can result in different library ordering based on which files were touched last. Thus, it results in some noisy compilation, for every CCLD line: CCLD libvirt_driver_qemu_impl.la ar: `u' modifier ignored since `D' is the default (see `U') Upstream automake has decided that defaulting ARFLAGS to 'cru' is no longer beneficial, and that switching the default to 'cr' will both silence the noise and not penalize modern build systems. https://lists.gnu.org/archive/html/automake-patches/2015-06/msg00000.html But rather than wait for newer automake to propagate to all systems that already have newer binutils, we might as well just use the new default ourselves, even on older platforms. Signed-off-by: Eric Blake <eblake(a)redhat.com> --- This is bugging me even more now that Fedora 22 also suffers from the same issue (we've been ignoring it in rawhide for several months now). While it seems trivial, I'd like a review before pushing. configure.ac | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure.ac b/configure.ac index 0da3ae8..abf4436 100644 --- a/configure.ac +++ b/configure.ac @@ -25,6 +25,10 @@ AC_CONFIG_MACRO_DIR([m4]) dnl Make automake keep quiet about wildcards & other GNUmake-isms; also keep dnl quiet about the fact that we intentionally cater to automake 1.9 AM_INIT_AUTOMAKE([-Wno-portability -Wno-obsolete tar-ustar subdir-objects]) +dnl older automake's default of ARFLAGS=cru is noisy on newer binutils; +dnl we don't really need the 'u' even in older toolchains. Then there is +dnl older libtool, which spelled it AR_FLAGS +m4_divert_text([DEFAULTS], [: "${ARFLAGS=cr} ${AR_FLAGS=cr}"]) # Maintainer note - comment this line out if you plan to rerun # GNULIB_POSIXCHECK testing to see if libvirt should be using more modules. -- 2.4.2

2 2

[libvirt] [PATCH v4 0/6] virsh: Further improve handling of integer options
by Andrea Bolognani 02 Jun '15

02 Jun '15

As suggested by Michal: now that we have a generic error message for failures related to the parsing of integer options, it makes sense to perform the corresponding check in a single spot instead of replicating it every time vshCommandOpt*() is used. Andrea Bolognani (6): tests: Add a bunch of new tests to virsh-optparse virsh: Use standard error messages in vshCommandOptTimeoutToMs() virsh: Improve vshCommandOptTimeoutToMs() virsh: Make vshCommandOptScaledInt() use vshCommandOpt() virsh: Pass vshControl to all vshCommandOpt*() calls virsh: Move error messages inside vshCommandOpt*() functions tests/vcpupin | 4 +- tests/virsh-optparse | 179 ++++++++++++++++++++++++++++++ tools/virsh-domain-monitor.c | 17 +-- tools/virsh-domain.c | 226 ++++++++++++-------------------------- tools/virsh-host.c | 67 +++--------- tools/virsh-interface.c | 6 +- tools/virsh-network.c | 10 +- tools/virsh-nodedev.c | 4 +- tools/virsh-snapshot.c | 2 +- tools/virsh-volume.c | 26 +---- tools/virsh.c | 252 ++++++++++++++++++++++++++----------------- tools/virsh.h | 66 ++++++------ 12 files changed, 461 insertions(+), 398 deletions(-) -- 2.1.0

2 8

[libvirt] Repository with Parallels SDK sources moved
by Sergey Bronnikov 02 Jun '15

02 Jun '15

Hello, repository with Parallels SDK has been moved from https://github.com/CloudServer/parallels-sdk to https://src.openvz.org/projects/OVZ/repos/libprlsdk/browse. Please update GIT settings. -- OpenVZ survey http://goo.gl/forms/orYmy0SjFB

1 0

[libvirt] [PATCH 0/2] Report errors in virNodeCountThreadSiblings
by Ján Tomko 02 Jun '15

02 Jun '15

https://bugzilla.redhat.com/show_bug.cgi?id=1207849 Ján Tomko (2): Report errors in virNodeCountThreadSiblings Simplify virNodeCountThreadSiblings src/nodeinfo.c | 34 +++++++--------------------------- 1 file changed, 7 insertions(+), 27 deletions(-) -- 2.3.6

3 4

[libvirt] [PATCH v2 0/2] storage: Fix error when deleting non-existent volumes
by Erik Skultety 02 Jun '15

02 Jun '15

Erik Skultety (2): storage: Don't update volume objs list before we successfully create one storage: RBD: do not return error when deleting non-existent volume src/storage/storage_backend_rbd.c | 6 +++--- src/storage/storage_driver.c | 31 +++++++++++++------------------ 2 files changed, 16 insertions(+), 21 deletions(-) -- 1.9.3

2 6

[libvirt] Bug 1227257
by 王松波 02 Jun '15

02 Jun '15

I report a bug [Bug 1227257] . In the environment libvirt-1.2.16.tar.gz + qemu-img version 2.1.2 + ceph version 0.94.1. libvirt pool will become inactive after one client does vol.delete and the other does pool.refresh in the same pool simultaneously. The reason is that rbd_list and rbd_open are not wrapped in an atomic operation, but two seperate operations. For example, two clients are operating in the same pool at the same time. One client does rbd_list, and got 10 rbd images, meanwhile, the other client deletes one of the rbd image. In this situation, when the first client does next operation, such as rbd_open , the command may fail, because the rbd image has been removed. I write a testcase in python to reproduce this problem as follow(also have put it in the attachment): ################################## import libvirt import sys import time import sys #coding:utf-8 QEMU_URL = 'qemu:///system' VOL_TEMPLATE=''' <volume> <name>{vol}</name> <key>{pool}/{vol}</key> <source> </source> <capacity unit='MB'>{cap_size}</capacity> <allocation unit='MB'>{alloc_size}</allocation> <target> <path>rbd:{pool}/{vol}</path> <format type='unknown'/> <permissions> <mode>00</mode> <owner>0</owner> <group>0</group> </permissions> </target> </volume>''' def create_vol(pool_name, vol_name, cap_size, alloc_size): conn = libvirt.open(QEMU_URL) if conn == None: print 'Failed to open connection to the hypervisor' sys.exit(1) try: pool = conn.storagePoolLookupByName(pool_name) pool.refresh() template = VOL_TEMPLATE.format(pool=pool_name, vol=vol_name, cap_size=cap_size, alloc_size=alloc_size) pool.createXML(template, 0) except: print 'Failed to open pool' sys.exit(1) finally: if conn is not None: conn.close() def destroy_vol(pool_name, vol_name): conn = libvirt.open(QEMU_URL) if conn == None: sys.exit(1) pool = conn.storagePoolLookupByName(pool_name) pool.refresh(0) vol = pool.storageVolLookupByName(vol_name) if vol is not None: vol.delete(0) if conn is not None: conn.close() if sys.argv[2] == 'create': for i in range(1, 20): volname = 'pool-down-test-%s-%d' % (sys.argv[1], i) print 'create %s' % volname create_vol('capacity', volname, '500', '500') elif sys.argv[2] == 'destroy': for i in range(1, 20): volname = 'pool-down-test-%s-%d' % (sys.argv[1], i) print 'destroy %s' % volname destroy_vol('capacity', volname) else: print 'Usage: python vol-test.py clientId OPER' print ' ' print 'where clientId : a num/string used to distinguish different client' print ' OPER : create/destroy' Patch for this is as fllow: diff --git a/src/storage/storage_backend_rbd.c b/src/storage/storage_backend_rbd.c index ae4bcb3..24fbc84 100644 --- a/src/storage/storage_backend_rbd.c +++ b/src/storage/storage_backend_rbd.c @@ -266,6 +266,46 @@ static int virStorageBackendRBDCloseRADOSConn(virStorageBackendRBDStatePtr ptr) return ret; } +static int volStorageBackendRBDVolIsExist(char *volname, virStorageBackendRBDStatePtr ptr) +{ + int ret = -1; + char *name, *names = NULL; + size_t max_size = 1024; + int len = -1; + + while (true) { + if (VIR_ALLOC_N(names, max_size) < 0) + goto cleanup; + + len = rbd_list(ptr->ioctx, names, &max_size); + if (len >= 0) + break; + if (len != -ERANGE) { + VIR_WARN("%s", _("A problem occurred while listing RBD images")); + goto cleanup; + } + VIR_FREE(names); + } + + for (name = names; name < names + max_size;) { + + if (STREQ(name, "")) + break; + + name += strlen(name) + 1; + if (STREQ(volname, name)) { + VIR_ERROR("RBD images '%s' is exist, but cannot open it", volname); + ret = -2; + break; + } + } + ret = 0; + +cleanup: + VIR_FREE(names); + return ret; +} + static int volStorageBackendRBDRefreshVolInfo(virStorageVolDefPtr vol, virStoragePoolObjPtr pool, virStorageBackendRBDStatePtr ptr) @@ -276,8 +316,15 @@ static int volStorageBackendRBDRefreshVolInfo(virStorageVolDefPtr vol, r = rbd_open(ptr->ioctx, vol->name, &image, NULL); if (r < 0) { - virReportSystemError(-r, _("failed to open the RBD image '%s'"), - vol->name); + VIR_DEBUG("failed to open RBD image '%s', check if it was still exist in its pool",\ + vol->name); + if (volStorageBackendRBDVolIsExist(vol->name, ptr) == 0) { + VIR_DEBUG("vol '%s' may be removed by the other rbd client", vol->name); + ret = 0; + } else { + virReportSystemError(-r, _("failed to open the RBD image '%s'"), + vol->name); + } return ret; }

2 1