- Devel - libvirt List Archives

[libvirt] [PATCH 0/4] Some small libxl bug fixes
by Jim Fehlig 30 Jun '15

30 Jun '15

While working on a patch to add dom0 support to the libxl driver, I noticed a few existing bugs which are fixed by this small series. IMO 1 and 2 are safe even during the freeze as they fix quite annoying bugs. 3 and 4 are probably safe bug fixes too, unless I'm confused about the use of domainObj->{def,newDef,persistentDef} Jim Fehlig (4): libxl: don't overwrite domain state from statedir config libxl: don't remove persistent domain on start failure libxl: honor domainGetXMLDesc() --inactive flag libxl: Set def->vcpus after successfully modifying live vcpu count src/libxl/libxl_driver.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-) -- 2.3.7

3 7

[libvirt] [libvirt-glib] More coverage for networking API v2
by Zeeshan Ali (Khattak) 30 Jun '15

30 Jun '15

Fixed the compiler warnings introduced by one of the patches.

3 18

[libvirt] [sandbox v2 00/11] Actually use host-image mounts on /
by Cédric Bosdonnat 30 Jun '15

30 Jun '15

Hi all, In the virt-sandbox documentation we had examples with host-image mounts targetting /. However the / in the sandbox was still the host one. The main goal of this patch series is to fix that problem. This will also be needed to run docker container with libvirt-sandbox. I also added some configure flags to disable lzma or zlib support at build time. At least opensuse 13.2 doesn't have static lzma. Diff to v1: * Fixed Dan's comments * Fixed the container case: * Made init-lxc all-static * Moved the init copy code to libvirt-sandbox-builder.c * Use setenv to set the LD_LIBRARY_PATH rather than reset the whole environment using execve Cédric Bosdonnat (11): Allow disabling build with lzma. Allow disabling zlib support. Enable strcmp checks in libvirt-sandbox-init-qemu.c Make init-lxc all static Copy all needed init programs and all its deps to config subdir Remove init-common dependency on libvirt-sandbox.so init-qemu: extract the mounts.cfg ntry mounting code qemu: use mounts targeting / as root Add function to check if there is a mount with / target Don't add sandbox:root device if we have a mount targetting / container builder: don't expose host rootfs if unneeded cfg.mk | 2 - configure.ac | 37 ++++- libvirt-sandbox/Makefile.am | 45 +++--- .../libvirt-sandbox-builder-container.c | 37 +++-- libvirt-sandbox/libvirt-sandbox-builder-machine.c | 22 +-- libvirt-sandbox/libvirt-sandbox-builder.c | 159 ++++++++++++++++++- libvirt-sandbox/libvirt-sandbox-builder.h | 2 + libvirt-sandbox/libvirt-sandbox-config-all.h | 62 ++++++++ libvirt-sandbox/libvirt-sandbox-config-disk.c | 2 +- libvirt-sandbox/libvirt-sandbox-config-initrd.c | 2 +- .../libvirt-sandbox-config-interactive.c | 2 +- .../libvirt-sandbox-config-mount-file.c | 2 +- .../libvirt-sandbox-config-mount-guest-bind.c | 2 +- .../libvirt-sandbox-config-mount-host-bind.c | 2 +- .../libvirt-sandbox-config-mount-host-image.c | 2 +- libvirt-sandbox/libvirt-sandbox-config-mount-ram.c | 2 +- libvirt-sandbox/libvirt-sandbox-config-mount.c | 2 +- .../libvirt-sandbox-config-network-address.c | 2 +- ...rt-sandbox-config-network-filterref-parameter.c | 2 +- .../libvirt-sandbox-config-network-filterref.c | 2 +- .../libvirt-sandbox-config-network-route.c | 2 +- libvirt-sandbox/libvirt-sandbox-config-network.c | 2 +- .../libvirt-sandbox-config-service-generic.c | 2 +- .../libvirt-sandbox-config-service-systemd.c | 2 +- libvirt-sandbox/libvirt-sandbox-config-service.c | 2 +- libvirt-sandbox/libvirt-sandbox-config.c | 23 ++- libvirt-sandbox/libvirt-sandbox-config.h | 1 + libvirt-sandbox/libvirt-sandbox-init-common.c | 5 +- libvirt-sandbox/libvirt-sandbox-init-lxc.c | 16 +- libvirt-sandbox/libvirt-sandbox-init-qemu.c | 175 +++++++++++++++++---- libvirt-sandbox/libvirt-sandbox-util.c | 2 +- libvirt-sandbox/libvirt-sandbox.sym | 1 + 32 files changed, 519 insertions(+), 104 deletions(-) create mode 100644 libvirt-sandbox/libvirt-sandbox-config-all.h -- 2.1.4

2 15

[libvirt] [PATCH] qemu: process: Improve update of maximum baloon state at startup
by Peter Krempa 30 Jun '15

30 Jun '15

In commit 641a145d73fdc3dd9350fd57b3d3247abf101c05 I've added code that resets the ballon memory value to full size prior to resuming the vCPUs since the size certainly was not reduced at that point. Since qemuProcess start is used also in code paths with already booted up guests (migration, save/restore) the assumption is not entirely true since the guest might already been running before. This patch adds a function that queries the monitor rather than using the full size since a balloon event would not be reissued in case we are recovering a saved migration state. Additionally the new function is used also when reconnecting to a VM after libvirtd restart since we might have missed a few ballon events while libvirtd was not running. --- src/qemu/qemu_process.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index ba84182..5698404 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -2065,6 +2065,35 @@ qemuProcessReconnectRefreshChannelVirtioState(virQEMUDriverPtr driver, static int +qemuProcessRefreshBallonState(virQEMUDriverPtr driver, + virDomainObjPtr vm) +{ + unsigned long long balloon; + int rc; + + /* if no balloning is available, the current size equals to the current + * full memory size */ + if (!vm->def->memballoon || + vm->def->memballoon->model == VIR_DOMAIN_MEMBALLOON_MODEL_NONE) { + vm->def->mem.cur_balloon = virDomainDefGetMemoryActual(vm->def); + return 0; + } + + qemuDomainObjEnterMonitor(driver, vm); + rc = qemuMonitorGetBalloonInfo(qemuDomainGetMonitor(vm), &balloon); + if (qemuDomainObjExitMonitor(driver, vm) < 0) + rc = -1; + + if (rc < 0) + return -1; + + vm->def->mem.cur_balloon = balloon; + + return 0; +} + + +static int qemuProcessWaitForMonitor(virQEMUDriverPtr driver, virDomainObjPtr vm, int asyncJob, @@ -3779,6 +3808,9 @@ qemuProcessReconnect(void *opaque) if (qemuProcessReconnectRefreshChannelVirtioState(driver, obj) < 0) goto error; + if (qemuProcessRefreshBallonState(driver, obj) < 0) + goto error; + if (qemuProcessRecoverJob(driver, obj, conn, &oldjob) < 0) goto error; @@ -4922,7 +4954,8 @@ int qemuProcessStart(virConnectPtr conn, /* Since CPUs were not started yet, the ballon could not return the memory * to the host and thus cur_balloon needs to be updated so that GetXMLdesc * and friends return the correct size in case they can't grab the job */ - vm->def->mem.cur_balloon = virDomainDefGetMemoryActual(vm->def); + if (qemuProcessRefreshBallonState(driver, vm) < 0) + goto cleanup; VIR_DEBUG("Detecting actual memory size for video device"); if (qemuProcessUpdateVideoRamSize(driver, vm, asyncJob) < 0) -- 2.4.1

2 1

[libvirt] [PATCH 0/3] Address a couple of mpath/Multipath storage pool issues
by John Ferlan 30 Jun '15

30 Jun '15

My thought was to combine patch 2 and 3 unless it was felt that disallowing more than one Multipath pool to defined at one time (patch 3) was unnecessary For patch 1, I did some searching and came across the following to describe why /dev/mpath is no longer valid: http://comments.gmane.org/gmane.linux.kernel.device-mapper.devel/13864 I kept /dev/mpath as a valid option only just in case there's some strange back-compat issue or some platform where /dev/mpath is preferred/used instead of /dev/mapper. John Ferlan (3): mpath: Update path in CheckPool function docs: Clarify the Multipath target path value usage mpath: Don't allow more than one mpath pool at a time docs/formatstorage.html.in | 2 ++ docs/storage.html.in | 3 ++- src/conf/storage_conf.c | 3 +++ src/storage/storage_backend_mpath.c | 3 ++- 4 files changed, 9 insertions(+), 2 deletions(-) -- 2.1.0

2 5

[libvirt] [PATCH 0/2] Domain lifecycle onCrash adjustments
by John Ferlan 30 Jun '15

30 Jun '15

First patch uses the right symbols, second patch adds an extra check to qemu backend for the coredump-destroy action John Ferlan (2): Use the correct symbol for 'onCrash' qemu: Add missing on_crash lifecycle type src/lxc/lxc_native.c | 2 +- src/qemu/qemu_command.c | 5 +++-- src/vmx/vmx.c | 2 +- src/xenconfig/xen_sxpr.c | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) -- 2.1.0

2 3

[libvirt] [RFC] qemu: Redesigning guest CPU configuration
by Jiri Denemark 30 Jun '15

30 Jun '15

Hi all (and sorry for the long email), The current way QEMU driver handles guest CPU configuration is not ideal. We detect host CPU capabilities only by querying the CPU and we don't check with QEMU what features it supports. We don't check QEMU's definitions of CPU models, which may be different from libvirt's definitions. All this results in several issues: - guest CPU may change druing migration, save/restore - libvirt may ask for a CPU which QEMU cannot provide; the guest will see a slightly different CPU but libvirt client won't know about it - libvirt may come up with a CPU that doesn't make sense and which won't work for a guest (the guest may even crash) Although usually everything just works, it is very fragile. Since we want to fix all these issues, we need to: - guarantee stable guest ABI (a single domain XML should always results in the same guest ABI). Once a domain is started, its CPU definition should never change (unless someone changes the XML, of course, similar to, e.g. PCI addresses). However, there are a few exceptions: - host-passthrough CPU mode will always result in "-cpu host" - host-model CPU mode should recompute the CPU model on every start, but the CPU must not change during migration - always make sure QEMU provides the CPU we asked for. Starting a domain should fail in case QEMU cannot provide exactly the CPU we asked for. - provide usable host-model mode and custom mode with minimum match. We need to generate CPU configurations that actually work, i.e., we need to ask QEMU what CPU it can provide on current host rather than requesting a bunch of features on top of a CPU model which does not always match the host CPU. QEMU already provides or will soon provide everything we need to meet these requirements: - we can cover every configurable part of a CPU in our cpu_map.xml and instead of asking QEMU for a specific CPU model we can use "-cpu custom" with a fully specified CPU - we can use the additional data about CPU models to choose the right one for a host CPU - when starting a domain we can check whether QEMU filtered out any of the features we asked for and refuse to start the domain - we can ask QEMU what would "-cpu host" look like and use that for host-model and minimum match CPUs (it won't work for TCG mode, though, but we can keep using the current CPUID detection code for TCG) Once we start maintaining CPU models with all the details, we will likely meet the same issues QEMU folks meet, i.e., we will need to fix bugs in existing CPU models. And it's not just about adding removing CPU features but also fixing other parameters, such as wrong level, etc. It's clear every change will require a new CPU model to be defined. But I think we should do it in a way that applications or users should not need (if they don't want to) to care about it. I'm thinking about doing something similar to machine types. Each CPU model could be defined in several versions and a CPU specs without a version would be an alias to the latest version. The problem is, we need to maintain backward compatibility and we should avoid breaking existing domains (shouldn't we?) which just work even though their guest CPUs do not exactly match the domain XML definitions. So either we need to define all existing CPU models in all their variants used for various machine types and have a mapping between (model without a version, machine type) to a specific version of the model (which may be quite hard) or we need to be able to distinguish between an existing domain and a new domain with no CPU model version. While host-model and host-passthrough CPU modes are easy because they are designed to change everytime a domain starts (which means we don't need to be able to distinguish between existing and new domains), custom CPU mode are tricky. Currently, the only at least a bit reasonable thing which came to my mind is to have a new CPU mode, but it still seems awkward so please share your ideas if you have any. BTW, I don't think we should try to expose every part of the CPU model definitions in domain XML, they should remain hidden behind the CPU model name. It would be hard to explain what each of the extra parameters mean, each model would have to include them anyway since we can't expect users to provide all the details correctly, and once visible in domain XML it could encourage users to play with the values. I'm looking forward to any comments or ideas. Jirka

4 14

[libvirt] [PATCH 0/7] Restore code to allow unpriv_sgio for hostdev SCSI generic
by John Ferlan 30 Jun '15

30 Jun '15

https://bugzilla.redhat.com/show_bug.cgi?id=1072736 This series of patches unreverts the functionality from commit id 'ce346623' which reverted the original functionality. Since pure revert caused too many conflicts and because the code has undergone a few changes since the prior reversion, I had to restore the code by rote method. The reversion includes some refactorings to make the final check much easier to handle. Of note patch 3 covers much of what was adjusted in the reverted patch 'qemuCheckSharedDevice'. Patch 4 expands the driver lock to cover the same space as the similar disk code - I can take the other as well and shorten the time the disk code has the lock. Keeping them similar is mostly a sanity thing. John Ferlan (7): qemu: Introduce qemuIsSharedHostdev qemu: Introduce qemuGetHostdevPath qemu: Refactor qemuCheckSharedDisk to create virCheckUnprivSGIO qemu: Refactor qemuAddSharedHostdev and qemuRemoveSharedHostdev qemu: Extract qemuGetHostdevPath from qemuGetSharedHostdevKey qemu: Add ability to set sgio values for hostdev qemu: Add check for unpriv sgio for SCSI generic host device src/qemu/qemu_conf.c | 205 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 138 insertions(+), 67 deletions(-) -- 2.1.0

2 12

[libvirt] [PATCH] Added support for portable-rpcgen from portablexdr library
by Pavel Fedin 30 Jun '15

30 Jun '15

This patch allows to build libvirt natively under MinGW/MSYS using portablexdr library. An updated version of portablexdr with fixed bugs is available as part of MSYS2 project. Signed-off-by: Pavel Fedin <p.fedin(a)samsung.com> --- configure.ac | 2 +- src/lxc/lxc_monitor_protocol.x | 2 +- src/rpc/genprotocol.pl | 5 ++++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/configure.ac b/configure.ac index aed0934..547a405 100644 --- a/configure.ac +++ b/configure.ac @@ -397,7 +397,7 @@ AM_CONDITIONAL([HAVE_LIBTASN1], [test "x$ac_cv_header_libtasn1_h" = "xyes"]) AC_CHECK_LIB([intl],[gettext],[]) dnl Do we have rpcgen? -AC_PATH_PROG([RPCGEN], [rpcgen], [no]) +AC_PATH_PROGS([RPCGEN], [rpcgen portable-rpcgen], [no]) AM_CONDITIONAL([HAVE_RPCGEN], [test "x$ac_cv_path_RPCGEN" != "xno"]) dnl Is this GLIBC's buggy rpcgen? AM_CONDITIONAL([HAVE_GLIBC_RPCGEN], diff --git a/src/lxc/lxc_monitor_protocol.x b/src/lxc/lxc_monitor_protocol.x index 3b66af5..205d7c2 100644 --- a/src/lxc/lxc_monitor_protocol.x +++ b/src/lxc/lxc_monitor_protocol.x @@ -30,7 +30,7 @@ enum virLXCMonitorExitStatus { }; struct virLXCMonitorExitEventMsg { - enum virLXCMonitorExitStatus status; + virLXCMonitorExitStatus status; }; struct virLXCMonitorInitEventMsg { diff --git a/src/rpc/genprotocol.pl b/src/rpc/genprotocol.pl index 6e6d6d4..1ac2507 100755 --- a/src/rpc/genprotocol.pl +++ b/src/rpc/genprotocol.pl @@ -38,7 +38,10 @@ my $target = shift; unlink $target; -open RPCGEN, "-|", $rpcgen, $mode, $xdrdef +if ($rpcgen =~ /portable-rpcgen/) { + $rpcgen = "$rpcgen -o -"; +} +open RPCGEN, "-|", "$rpcgen $mode $xdrdef" or die "cannot run $rpcgen $mode $xdrdef: $!"; open TARGET, ">$target" or die "cannot create $target: $!"; -- 1.9.5.msysgit.0

1 1

[libvirt] [PATCH] conf: storage: Fix duplicate check for gluster pools
by Peter Krempa 30 Jun '15

30 Jun '15

The pool name has to be the same too to warrant rejecting a pool definition as duplicate. This regression was introduced in commit 2184ade3a0546b915252cb3b6a5dc88e9a8d2ccf. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1236438 --- src/conf/storage_conf.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c index 4bbed4f..4fa065d 100644 --- a/src/conf/storage_conf.c +++ b/src/conf/storage_conf.c @@ -2471,13 +2471,22 @@ virStoragePoolSourceFindDuplicate(virConnectPtr conn, if (STREQ(pool->def->target.path, def->target.path)) matchpool = pool; break; - case VIR_STORAGE_POOL_NETFS: + case VIR_STORAGE_POOL_GLUSTER: + if (STREQ(pool->def->source.name, def->source.name) && + STREQ(pool->def->source.dir, def->source.dir) && + virStoragePoolSourceMatchSingleHost(&pool->def->source, + &def->source)) + matchpool = pool; + break; + + case VIR_STORAGE_POOL_NETFS: if (STREQ(pool->def->source.dir, def->source.dir) && virStoragePoolSourceMatchSingleHost(&pool->def->source, &def->source)) matchpool = pool; break; + case VIR_STORAGE_POOL_SCSI: if (pool->def->source.adapter.type == VIR_STORAGE_POOL_SOURCE_ADAPTER_TYPE_FC_HOST && -- 2.4.1

2 2