- Devel - libvirt List Archives

Re: [libvirt] [PATCH V2 2/4] libxl: support hotplug USB host device
by Jim Fehlig 24 May '16

24 May '16

On 05/23/2016 12:51 AM, Chun Yan Liu wrote: > > Yes, I think it's OK. And another place needs to be updated, since now it's > not only pci device, but also could be usb device, so the error message > should be updated. > if (virDomainHostdevFind(vmdef, hostdev, &found) >= 0) { > - pcisrc = &hostdev->source.subsys.u.pci; > virReportError(VIR_ERR_OPERATION_FAILED, > - _("target pci device %.4x:%.2x:%.2x.%.1x\ > - already exists"), > - pcisrc->addr.domain, pcisrc->addr.bus, > - pcisrc->addr.slot, pcisrc->addr.function); > + _("device already exists in domain configuration")); > return -1; > } Nice catch. I've squashed in the below diff, changing the error code and message to match the qemu driver. Regards, Jim diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c index 5b6f87a..4d7124d 100644 --- a/src/libxl/libxl_driver.c +++ b/src/libxl/libxl_driver.c @@ -3293,7 +3293,6 @@ libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev) virDomainNetDefPtr net; virDomainHostdevDefPtr hostdev; virDomainHostdevDefPtr found; - virDomainHostdevSubsysPCIPtr pcisrc; char mac[VIR_MAC_STRING_BUFLEN]; switch (dev->type) { @@ -3336,12 +3335,8 @@ libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev) } if (virDomainHostdevFind(vmdef, hostdev, &found) >= 0) { - pcisrc = &hostdev->source.subsys.u.pci; - virReportError(VIR_ERR_OPERATION_FAILED, - _("target pci device %.4x:%.2x:%.2x.%.1x\ - already exists"), - pcisrc->addr.domain, pcisrc->addr.bus, - pcisrc->addr.slot, pcisrc->addr.function); + virReportError(VIR_ERR_OPERATION_INVALID, "%s", + _("device is already in the domain configuration")); return -1; }

2 1

[libvirt] [PATCH v2 0/8] Replace VIR_ERROR with standard vir*Error in state driver init
by Jovanka Gulicoska 23 May '16

23 May '16

Replace VIR_ERROR logging macros for error reporting in driver startup routines with vir*Error function. Link to task: http://wiki.libvirt.org/page/BiteSizedTasks#Replace_VIR_ERROR_with_standard… Jovanka Gulicoska (8): uml: Replace VIR_ERROR with standard vir*Error in state driver init xen: Replace VIR_ERROR with standard vir*Error in state driver init bhyve: Replace VIR_ERROR with standard vir*Error in state driver init libxl: Replace VIR_ERROR with standard vir*Error in state driver init node_device: Replace VIR_ERROR with standard vir*Error in state driver init nwfilter: Replace VIR_ERROR with standard vir*Error in state driver init qemu: Replace VIR_ERROR with standard vir*Error in state driver init storage: Replace VIR_ERROR with standard vir*Error in state driver init src/bhyve/bhyve_driver.c | 4 +-- src/libxl/libxl_driver.c | 6 ++--- src/node_device/node_device_hal.c | 24 ++++++++++------- src/node_device/node_device_udev.c | 45 +++++++++++++++++++------------ src/nwfilter/nwfilter_driver.c | 5 ++-- src/qemu/qemu_driver.c | 55 ++++++++++++++++++++++++-------------- src/storage/storage_driver.c | 32 +++++++++++++--------- src/uml/uml_driver.c | 20 +++++++------- src/xen/xen_driver.c | 5 ++-- 9 files changed, 119 insertions(+), 77 deletions(-) -- 2.5.5

2 13

[libvirt] [PATCH] vz: add error code for case if vm is already stopped
by Mikhail Feoktistov 23 May '16

23 May '16

If try to stop VM or container which is already stopped than Virtuozzo 7 returns code PRL_ERR_INVALID_ACTION_REQUESTED. Error code PRL_ERR_DISP_VM_IS_NOT_STARTED is used in Virtuozzo 6 --- src/vz/vz_sdk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/vz/vz_sdk.c b/src/vz/vz_sdk.c index a396d41..7eb78ca 100644 --- a/src/vz/vz_sdk.c +++ b/src/vz/vz_sdk.c @@ -2050,6 +2050,7 @@ prlsdkDomainChangeStateLocked(vzDriverPtr driver, switch (pret) { case PRL_ERR_DISP_VM_IS_NOT_STARTED: case PRL_ERR_DISP_VM_IS_NOT_STOPPED: + case PRL_ERR_INVALID_ACTION_REQUESTED: virerr = VIR_ERR_OPERATION_INVALID; break; default: -- 1.8.3.1

2 1

[libvirt] [PATCH] qemu: don't refuse to undefine a guest with NVRAM file
by Daniel P. Berrange 23 May '16

23 May '16

The undefine operation should always be allowed to succeed regardless of whether any NVRAM file exists. ie we should not force the application to use the VIR_DOMAIN_UNDEFINE_NVRAM flag. It is valid for the app to decide it wants the NVRAM file left on disk, in the same way that disk images are left on disk at undefine. --- src/qemu/qemu_driver.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index bec05d4..302bf48 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -6985,19 +6985,13 @@ qemuDomainUndefineFlags(virDomainPtr dom, if (!virDomainObjIsActive(vm) && vm->def->os.loader && vm->def->os.loader->nvram && - virFileExists(vm->def->os.loader->nvram)) { - if (!(flags & VIR_DOMAIN_UNDEFINE_NVRAM)) { - virReportError(VIR_ERR_OPERATION_INVALID, "%s", - _("cannot delete inactive domain with nvram")); - goto cleanup; - } - - if (unlink(vm->def->os.loader->nvram) < 0) { - virReportSystemError(errno, - _("failed to remove nvram: %s"), - vm->def->os.loader->nvram); - goto cleanup; - } + virFileExists(vm->def->os.loader->nvram) && + (flags & VIR_DOMAIN_UNDEFINE_NVRAM) && + (unlink(vm->def->os.loader->nvram) < 0)) { + virReportSystemError(errno, + _("failed to remove nvram: %s"), + vm->def->os.loader->nvram); + goto cleanup; } if (virDomainDeleteConfig(cfg->configDir, cfg->autostartDir, vm) < 0) -- 2.1.0

6 17

Re: [libvirt] [PATCH] Oracle VirtualBox 5 support or libvirt
by Eric Blake 23 May '16

23 May '16

[the moderation queue rejected your message for being too large] On 12/31/1969 05:00 PM, wrote: > --- > src/Makefile.am | 1 + > src/vbox/vbox_CAPI_v5_0.h | 25550 ++++++++++++++++++++++++++++++++++++++++ That's an awfully large patch, particularly if it is mostly generated. Can you resend, with the patch as a compressed attachment, so that it can make it through the moderation queue? Is it something that can logically be broken to smaller pieces, or is it really an all-or-none addition of the new huge file? > src/vbox/vbox_V5_0.c | 13 + > src/vbox/vbox_common.h | 2 + > src/vbox/vbox_storage.c | 2 + > src/vbox/vbox_tmpl.c | 290 +- > src/vbox/vbox_uniformed_api.h | 1 + > 7 files changed, 25752 insertions(+), 107 deletions(-) > create mode 100644 src/vbox/vbox_CAPI_v5_0.h > create mode 100644 src/vbox/vbox_V5_0.c > > diff --git a/src/Makefile.am b/src/Makefile.am > index 314f6df..4a7b85f 100644 > --- a/src/Makefile.am > +++ b/src/Makefile.am > @@ -783,6 +783,7 @@ VBOX_DRIVER_SOURCES = \ > vbox/vbox_V4_2_20.c vbox/vbox_CAPI_v4_2_20.h \ > vbox/vbox_V4_3.c vbox/vbox_CAPI_v4_3.h \ > vbox/vbox_V4_3_4.c vbox/vbox_CAPI_v4_3_4.h \ > + vbox/vbox_V5_0.c vbox/vbox_CAPI_v5_0.h \ > vbox/vbox_common.c vbox/vbox_common.h \ > vbox/vbox_uniformed_api.h \ > vbox/vbox_get_driver.h \ > diff --git a/src/vbox/vbox_CAPI_v5_0.h b/src/vbox/vbox_CAPI_v5_0.h > new file mode 100644 > index 0000000..b296733 > --- /dev/null > +++ b/src/vbox/vbox_CAPI_v5_0.h > @@ -0,0 +1,25550 @@ > +/* > + * Libvirt notice: this file is derived from the VirtualBox SDK, with > + * libvirt edits (fixing preprocessor indentation by cppi); do not > + * regenerate in the context of libvirt. > + */ > +/* > + * DO NOT EDIT! This is a generated file. > + * > + * Header file which provides C declarations for VirtualBox Main API > + * (COM interfaces), generated from XIDL (XML interface definition). > + * On Windows (which uses COM instead of XPCOM) the native C support > + * is used, and most of this file is not used. > + * > + * Source : src/VBox/Main/idl/VirtualBox.xidl > + * Generator : src/VBox/Main/cbinding/capiidl.xsl > + * > + * This file contains portions from the following Mozilla XPCOM files: > + * xpcom/include/xpcom/nsID.h > + * xpcom/include/nsIException.h > + * xpcom/include/nsprpub/prtypes.h > + * xpcom/include/xpcom/nsISupportsBase.h > + * > + * These files were originally triple-licensed (MPL/GPL2/LGPL2.1). Oracle > + * elects to distribute this derived work under the LGPL2.1 only. > + */ > + > +/* > + * Copyright (C) 2008-2015 Oracle Corporation > + * > + * This file is part of a free software library; you can redistribute > + * it and/or modify it under the terms of the GNU Lesser General > + * Public License version 2.1 as published by the Free Software > + * Foundation and shipped in the "COPYING.LESSER" file with this library. > + * The library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY of any kind. > + * > + * Oracle LGPL Disclaimer: For the avoidance of doubt, except that if > + * any license choice other than GPL or LGPL is available it will > + * apply instead, Oracle elects to use only the Lesser General Public > + * License version 2.1 (LGPLv2) at this time for any software where > + * a choice of LGPL license versions is made available with the > + * language indicating that LGPLv2 or any later version may be used, > + * or where a choice of which version of the LGPL is applied is > + * otherwise unspecified. > + */ Bummer that the license is restrictive against GPLv3, but no worse than any of the other files in the same directory, so not your problem. > height, bitsPerPixel, > xOrigin, yOrigin); > -#endif /* VBOX_API_VERSION >= 4003000 */ > +#else /*VBOX_API_VERSION >= 5000000 */ > + PRUint32 gms; > + > + return display->vtbl->GetScreenResolution(display, screenId, width, > + height, bitsPerPixel, > + xOrigin, yOrigin, &gms); > +#endif /* VBOX_API_VERSION >= 5000000 */ > + > } > > static nsresult > @@ -4357,10 +4433,10 @@ _displayTakeScreenShotPNGToArray(IDisplay *display ATTRIBUTE_UNUSED, > PRUint32 *screenDataSize ATTRIBUTE_UNUSED, > PRUint8** screenData ATTRIBUTE_UNUSED) > { > -#if VBOX_API_VERSION < 4000000 > +#if VBOX_API_VERSION < 4000000 || VBOX_API_VERSION >= 5000000 > vboxUnsupported(); > return 0; > -#else /* VBOX_API_VERSION >= 4000000 */ > +#else /* VBOX_API_VERSION >= 4000000 && VBOX_API_VERSION < 5000000 */ > return display->vtbl->TakeScreenShotPNGToArray(display, screenId, width, > height, screenDataSize, > screenData); > diff --git a/src/vbox/vbox_uniformed_api.h b/src/vbox/vbox_uniformed_api.h > index a469968..74e9ac0 100644 > --- a/src/vbox/vbox_uniformed_api.h > +++ b/src/vbox/vbox_uniformed_api.h > @@ -628,5 +628,6 @@ void vbox42InstallUniformedAPI(vboxUniformedAPI *pVBoxAPI); > void vbox42_20InstallUniformedAPI(vboxUniformedAPI *pVBoxAPI); > void vbox43InstallUniformedAPI(vboxUniformedAPI *pVBoxAPI); > void vbox43_4InstallUniformedAPI(vboxUniformedAPI *pVBoxAPI); > +void vbox50InstallUniformedAPI(vboxUniformedAPI *pVBoxAPI); > > #endif /* VBOX_UNIFORMED_API_H */ >

1 0

[libvirt] [PATCH v2 00/32] Introduce sparse streams
by Michal Privoznik 23 May '16

23 May '16

v2 of: https://www.redhat.com/archives/libvir-list/2016-April/msg01869.html diff to v1: - Reworked public API side of the feature. Event approach is no longer used. Instead I've implemented synchronous APIs as Dan suggested. You can find the code at my github repo too: https://github.com/zippy2/libvirt/tree/sparse_streams2 BTW: here is a measurement I made: homer libvirt.git # time ./tools/virsh -c qemu+tcp://lisa/system vol-download /mnt/cdrom/dummy.img /tmp/dummy.img real 3m9.178s user 0m32.978s sys 1m7.758s homer libvirt.git # time ./tools/virsh -c qemu+tcp://lisa/system vol-download --sparse /mnt/cdrom/dummy.img /tmp/dummy.img real 0m1.409s user 0m0.017s sys 0m1.042s masina libvirt.git # ls -lhs /tmp/dummy.img 4.0K -rw-r--r-- 1 root root 21G May 23 17:53 /tmp/dummy.img Michal Privoznik (32): Introduce virStreamRecvFlags Implement virStreamRecvFlags to some drivers Introduce virStreamSkip Introduce virStreamHoleSize Introduce VIR_STREAM_RECV_STOP_AT_HOLE flag Introduce virStreamSparseRecvAll Introduce virStreamSparseSendAll Introduce virStreamInData virNetClientStreamNew: Track origin stream Track if stream is skippable RPC: Introduce virNetStreamSkip Introduce VIR_NET_STREAM_SKIP message type Teach wireshark plugin about VIR_NET_STREAM_SKIP daemon: Introduce virNetServerProgramSendStreamSkip virnetclientstream: Introduce virNetClientStreamSendSkip daemon: Implement VIR_NET_STREAM_SKIP handling virnetclientstream: Introduce virNetClientStreamHandleSkip remote_driver: Implement virStreamSkip virNetClientStreamRecvPacket: Introduce @flags argument Introduce virNetClientStreamHoleSize remote: Implement virStreamHoleSize virNetClientStream: Wire up VIR_NET_STREAM_SKIP remote_driver: Implement VIR_STREAM_RECV_STOP_AT_HOLE daemonStreamHandleRead: Wire up seekable stream fdstream: Implement seek gendispatch: Introduce @sparseflag for our calls Introduce virStorageVol{Download,Upload}Flags virsh: Implement sparse stream to vol-download virsh: Implement sparse stream to vol-upload daemon: Don't call virStreamInData so often fdstream: Suppress use of IO helper for sparse streams storage: Enable sparse streams for virStorageVol{Download,Upload} daemon/remote.c | 2 +- daemon/stream.c | 147 +++++++++++- daemon/stream.h | 3 +- include/libvirt/libvirt-storage.h | 9 + include/libvirt/libvirt-stream.h | 86 ++++++- src/driver-stream.h | 23 ++ src/esx/esx_stream.c | 16 +- src/fdstream.c | 117 ++++++++- src/libvirt-storage.c | 4 +- src/libvirt-stream.c | 454 +++++++++++++++++++++++++++++++++++ src/libvirt_internal.h | 3 + src/libvirt_private.syms | 1 + src/libvirt_public.syms | 10 + src/libvirt_remote.syms | 3 + src/remote/remote_driver.c | 89 ++++++- src/remote/remote_protocol.x | 2 + src/rpc/gendispatch.pl | 21 +- src/rpc/virnetclient.c | 1 + src/rpc/virnetclientstream.c | 203 +++++++++++++++- src/rpc/virnetclientstream.h | 17 +- src/rpc/virnetprotocol.x | 16 +- src/rpc/virnetserverprogram.c | 33 +++ src/rpc/virnetserverprogram.h | 7 + src/storage/storage_backend.c | 6 +- src/storage/storage_driver.c | 4 +- src/virnetprotocol-structs | 4 + tools/virsh-volume.c | 49 ++-- tools/virsh.c | 93 +++++++ tools/virsh.h | 17 ++ tools/virsh.pod | 6 +- tools/wireshark/src/packet-libvirt.c | 40 +++ tools/wireshark/src/packet-libvirt.h | 2 + 32 files changed, 1419 insertions(+), 69 deletions(-) -- 2.8.3

1 32

[libvirt] [PATCH 0/2] Fix a couple of recently found coverity issues
by John Ferlan 23 May '16

23 May '16

John Ferlan (2): qemu: Remove dead code lxc: Fix lxcDomainDestroyFlags endjob processing src/lxc/lxc_driver.c | 8 ++++---- src/qemu/qemu_domain_address.c | 14 +++++--------- 2 files changed, 9 insertions(+), 13 deletions(-) -- 2.5.5

3 4

[libvirt] [PATCH v2 0/8] PCI Multifunction device hotplug support
by Shivaprasad G Bhat 23 May '16

23 May '16

V1 was posted here. http://www.redhat.com/archives/libvir-list/2016-May/msg01178.html Changes from V1 Fixed couple of issues in address validation and assignment. Added Rollback of the hotplug if anything fails in between. Removed Patch 6 completely as it exposed way too many bugs. Changed the approach a bit by introducing 2 new patches which take care of hostdevice preparation and help reverting. Todo: 1) Hardening the hotplug checks to disallow multifunction cards hotplug as though they are single function cards. 2) Documentation update. 3) Test cases. 4) Should the events be delayed till all the functions are hotplugged/unplugged? Something can fail and the revert may not be possible Or the guest may refuse to free the device. If we show events for those which got free, the rest of them may never be freed and also that may not be usable by guest if the function 0 is not part of it. Need to think more on this. Any suggestions ? --- Shivaprasad G Bhat (8): Revert "prevent hot unplugging multi function PCI device" Release address in function granularity than slot Validate address in virDomainPCIAddressReleaseAddr Introduce PCI Multifunction device parser Introduce virDomainPCIMultifunctionDeviceAddressAssign Separate the hostdevice preparation and checks to a new funtion Move the detach of PCI device to the beginnging of live hotplug Enable PCI Multifunction hotplug/unplug src/conf/domain_addr.c | 239 ++++++++++++++++++++++++++++-- src/conf/domain_addr.h | 4 src/conf/domain_conf.c | 236 +++++++++++++++++++++++++++++ src/conf/domain_conf.h | 22 +++ src/libvirt_private.syms | 5 + src/qemu/qemu_domain_address.c | 2 src/qemu/qemu_driver.c | 321 ++++++++++++++++++++++++++++++++-------- src/qemu/qemu_hotplug.c | 161 ++++++++------------ src/qemu/qemu_hotplug.h | 5 + 9 files changed, 818 insertions(+), 177 deletions(-) -- Signature

4 24

[libvirt] [PATCH] storage: do not clear vols before volume upload
by Ján Tomko 23 May '16

23 May '16

Commit 5e54361c added virStoragePoolObjClearVols before refreshPool to prevent duplicate volume entries. However it is not needed here because we're not refreshing the pool yet, just checking for the existence of the refresh callback. The actual refresh is done via virStorageVolFDStreamCloseCb in virStorageVolPoolRefreshThread, which already calls virStoragePoolObjClearVols. --- src/storage/storage_driver.c | 1 - 1 file changed, 1 deletion(-) diff --git a/src/storage/storage_driver.c b/src/storage/storage_driver.c index ce31e38..eb5f688 100644 --- a/src/storage/storage_driver.c +++ b/src/storage/storage_driver.c @@ -2353,15 +2353,14 @@ storageVolUpload(virStorageVolPtr obj, /* If we have a refreshPool, use the callback routine in order to * refresh the pool after the volume upload stream closes. This way * we make sure the volume and pool data are refreshed without user * interaction and we can just lookup the backend in the callback * routine in order to call the refresh API. */ - virStoragePoolObjClearVols(pool); if (backend->refreshPool) { if (VIR_ALLOC(cbdata) < 0 || VIR_STRDUP(cbdata->pool_name, pool->def->name) < 0) goto cleanup; if (vol->target.type == VIR_STORAGE_VOL_PLOOP && VIR_STRDUP(cbdata->vol_path, vol->target.path) < 0) goto cleanup; -- 2.7.3

2 2

[libvirt] [PATCH 0/9] Deprecate more unused QEMU_CAPS
by Ján Tomko 23 May '16

23 May '16

Cleaning up after QEMU_CAPS_DEVICE I noticed QEMU_CAPS_DRIVE_READONLY depends on it and QEMU_CAPS_PCIDEVICE did not really matter. Ján Tomko (9): qemu_command: assume QEMU_CAPS_DEVICE qemu: assume QEMU_CAPS_DEVICE almost everywhere tests: remove disk-drive-fat test tests: remove <readonly/> from IDE disks tests: always assume QEMU_CAPS_DRIVE_READONLY qemu: always assume QEMU_CAPS_DRIVE_READONLY Deprecate QEMU_CAPS_DRIVE_READONLY Deprecate QEMU_CAPS_DEVICE Deprecate QEMU_CAPS_PCIDEVICE src/qemu/qemu_capabilities.c | 46 +-- src/qemu/qemu_capabilities.h | 6 +- src/qemu/qemu_command.c | 425 ++++++--------------- src/qemu/qemu_command.h | 3 +- src/qemu/qemu_domain.c | 6 +- src/qemu/qemu_domain.h | 1 - src/qemu/qemu_hostdev.c | 4 +- src/qemu/qemu_hotplug.c | 61 +-- src/qemu/qemu_process.c | 8 +- tests/qemucapabilitiesdata/caps_1.2.2.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_1.3.1.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_1.4.2.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_1.6.50.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml | 2 - tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 2 - .../caps_2.6.0-gicv2.aarch64.xml | 2 - .../caps_2.6.0-gicv3.aarch64.xml | 2 - tests/qemucapabilitiesdata/caps_2.6.0.ppc64le.xml | 2 - tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 2 - tests/qemuhelptest.c | 45 +-- tests/qemuhotplugtest.c | 2 - .../qemuxml2argvdata/qemuxml2argv-boot-cdrom.args | 3 +- .../qemuxml2argv-boot-complex-bootindex.args | 3 +- .../qemuxml2argv-boot-complex.args | 3 +- ...xml2argv-boot-menu-disable-drive-bootindex.args | 3 +- .../qemuxml2argv-boot-menu-disable-drive.args | 3 +- .../qemuxml2argv-boot-menu-disable.args | 3 +- ...qemuxml2argv-boot-menu-enable-with-timeout.args | 3 +- .../qemuxml2argv-boot-menu-enable.args | 3 +- .../qemuxml2argvdata/qemuxml2argv-boot-multi.args | 3 +- .../qemuxml2argvdata/qemuxml2argv-boot-order.args | 3 +- .../qemuxml2argvdata/qemuxml2argv-boot-strict.args | 3 +- .../qemuxml2argv-controller-order.args | 2 +- tests/qemuxml2argvdata/qemuxml2argv-disk-aio.args | 2 +- .../qemuxml2argv-disk-blockio.args | 3 +- .../qemuxml2argv-disk-cdrom-empty.args | 2 +- .../qemuxml2argv-disk-cdrom-network-ftp.args | 2 +- .../qemuxml2argv-disk-cdrom-network-ftps.args | 2 +- .../qemuxml2argv-disk-cdrom-network-http.args | 2 +- .../qemuxml2argv-disk-cdrom-network-https.args | 2 +- .../qemuxml2argv-disk-cdrom-network-tftp.args | 2 +- ...qemuxml2argv-disk-cdrom-tray-no-device-cap.args | 2 +- .../qemuxml2argv-disk-cdrom-tray.args | 4 +- .../qemuxml2argvdata/qemuxml2argv-disk-cdrom.args | 3 +- .../qemuxml2argv-disk-copy_on_read.args | 2 +- .../qemuxml2argv-disk-drive-boot-cdrom.args | 2 +- .../qemuxml2argv-disk-drive-boot-disk.args | 2 +- .../qemuxml2argv-disk-drive-cache-directsync.args | 2 +- .../qemuxml2argv-disk-drive-cache-unsafe.args | 2 +- .../qemuxml2argv-disk-drive-cache-v2-none.args | 2 +- .../qemuxml2argv-disk-drive-cache-v2-wb.args | 2 +- .../qemuxml2argv-disk-drive-cache-v2-wt.args | 2 +- .../qemuxml2argv-disk-drive-discard.args | 2 +- ...uxml2argv-disk-drive-error-policy-enospace.args | 2 +- .../qemuxml2argv-disk-drive-error-policy-stop.args | 2 +- ...gv-disk-drive-error-policy-wreport-rignore.args | 2 +- .../qemuxml2argv-disk-drive-fat.args | 22 -- .../qemuxml2argv-disk-drive-fat.xml | 31 -- .../qemuxml2argv-disk-drive-fmt-qcow.args | 2 +- .../qemuxml2argv-disk-drive-no-boot.args | 2 +- .../qemuxml2argv-disk-drive-shared.args | 2 +- .../qemuxml2argv-disk-ide-drive-split.args | 3 +- .../qemuxml2argv-disk-ioeventfd.args | 2 +- .../qemuxml2argvdata/qemuxml2argv-disk-order.args | 2 +- .../qemuxml2argv-disk-scsi-disk-split.args | 6 +- .../qemuxml2argv-disk-scsi-disk-vpd.args | 6 +- .../qemuxml2argv-disk-scsi-disk-wwn.args | 3 +- .../qemuxml2argv-disk-snapshot.args | 2 +- .../qemuxml2argv-disk-source-pool-mode.args | 5 +- .../qemuxml2argv-disk-source-pool.args | 5 +- .../qemuxml2argvdata/qemuxml2argv-disk-virtio.args | 2 +- tests/qemuxml2argvdata/qemuxml2argv-event_idx.args | 2 +- .../qemuxml2argv-floppy-drive-fat.args | 2 +- .../qemuxml2argv-graphics-spice-timeout.args | 2 +- .../qemuxml2argv-hugepages-numa.args | 2 +- .../qemuxml2argv-pci-autoadd-addr.args | 3 +- .../qemuxml2argv-pci-autoadd-idx.args | 3 +- tests/qemuxml2argvdata/qemuxml2argv-pci-many.args | 3 +- .../qemuxml2argv-seclabel-dynamic-override.xml | 1 - tests/qemuxml2argvtest.c | 43 +-- .../qemuxml2xmlout-seclabel-dynamic-override.xml | 1 - tests/qemuxml2xmltest.c | 2 - 85 files changed, 246 insertions(+), 631 deletions(-) delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml -- 2.7.3

2 12