- Devel - libvirt List Archives

[libvirt] [PATCH] lxc: errors after the handshake won't be reported
by Cédric Bosdonnat 19 Jul '16

19 Jul '16

Any error happening after the hand shake in the lxc controller will not result in a failure as errors are checked during the handshake. Move the handshake after the last possible error. --- src/lxc/lxc_controller.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/lxc/lxc_controller.c b/src/lxc/lxc_controller.c index f55aadc..825b4d4 100644 --- a/src/lxc/lxc_controller.c +++ b/src/lxc/lxc_controller.c @@ -2444,13 +2444,13 @@ virLXCControllerRun(virLXCControllerPtr ctrl) if (lxcControllerClearCapabilities() < 0) goto cleanup; - if (virLXCControllerDaemonHandshake(ctrl) < 0) - goto cleanup; - for (i = 0; i < ctrl->nconsoles; i++) if (virLXCControllerConsoleSetNonblocking(&(ctrl->consoles[i])) < 0) goto cleanup; + if (virLXCControllerDaemonHandshake(ctrl) < 0) + goto cleanup; + /* We must not hold open a dbus connection for life * of LXC instance, since dbus-daemon is limited to * only a few 100 connections by default -- 2.6.6

2 1

[libvirt] [PATCH v4 0/7] Add support for LUKS encrypted devices
by John Ferlan 19 Jul '16

19 Jul '16

According to Dan's post commit response: http://www.redhat.com/archives/libvir-list/2016-July/msg00088.html to the v3 series: http://www.redhat.com/archives/libvir-list/2016-June/msg01935.html using a 'passphrase' usage is not desired, rather a 'volume' usage model should be used for LUKS. So patches 1 & 2 make those alterations to already pushed docs and tests Patch 3 then repurposes the 'passphrase' usage to a 'tls' usage type. I posted with this series since it removed the 'passphrase' usage and thus flushed out any errors in subsequent patches. I could hold off and repost it with the TLS changes that will also need to be made... Patches 4-7 were reviewed previously and had been given what I took as provisional ACK's; however, I reposted the changes after the most recent review "just in case". Fortunately (I guess) I didn't push them along with the other changes. In any case, there are once again posted here - the primary difference between what's posted in this series vs. what was posted previously is the change to use a "volume" secret plus a tweak to the qemuxml2argvtest to fix some issues found while making the change. John Ferlan (7): tests: Adjust LUKS tests to use 'volume' secret type docs: Update docs to reflect LUKS secret changes Repurpose the 'passphrase' secret to 'tls' storage: Add support to create a luks volume qemu: Add secinfo for hotplug virtio disk qemu: Alter the qemuDomainGetSecretAESAlias to add new arg qemu: Add luks support for domain disk docs/aclpolkit.html.in | 2 +- docs/formatsecret.html.in | 81 +++++--- docs/formatstorage.html.in | 16 ++ docs/formatstorageencryption.html.in | 29 ++- docs/schemas/secret.rng | 6 +- include/libvirt/libvirt-secret.h | 2 +- src/access/viraccessdriverpolkit.c | 2 +- src/conf/secret_conf.c | 12 +- src/conf/virsecretobj.c | 2 +- src/libvirt_private.syms | 1 + src/qemu/qemu_alias.c | 10 +- src/qemu/qemu_alias.h | 3 +- src/qemu/qemu_command.c | 9 + src/qemu/qemu_domain.c | 40 +++- src/qemu/qemu_hotplug.c | 126 +++++++++++- src/storage/storage_backend.c | 218 +++++++++++++++++++-- src/storage/storage_backend.h | 3 +- src/util/virqemu.c | 23 +++ src/util/virqemu.h | 6 + .../qemuxml2argv-luks-disk-cipher.xml | 45 ----- .../qemuxml2argvdata/qemuxml2argv-luks-disks.args | 36 ++++ tests/qemuxml2argvdata/qemuxml2argv-luks-disks.xml | 2 +- tests/qemuxml2argvtest.c | 24 ++- .../qemuxml2xmlout-luks-disk-cipher.xml | 1 - tests/qemuxml2xmltest.c | 1 - tests/secretxml2xmlin/usage-passphrase.xml | 7 - tests/secretxml2xmlin/usage-tls.xml | 7 + tests/secretxml2xmltest.c | 2 +- tests/storagevolxml2argvtest.c | 3 +- tests/storagevolxml2xmlin/vol-luks-cipher.xml | 2 +- tests/storagevolxml2xmlin/vol-luks.xml | 2 +- tests/storagevolxml2xmlout/vol-luks-cipher.xml | 2 +- tests/storagevolxml2xmlout/vol-luks.xml | 2 +- 33 files changed, 577 insertions(+), 150 deletions(-) delete mode 100644 tests/qemuxml2argvdata/qemuxml2argv-luks-disk-cipher.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-luks-disks.args delete mode 120000 tests/qemuxml2xmloutdata/qemuxml2xmlout-luks-disk-cipher.xml delete mode 100644 tests/secretxml2xmlin/usage-passphrase.xml create mode 100644 tests/secretxml2xmlin/usage-tls.xml -- 2.5.5

3 20

[libvirt] [PATCH] Debug: Record the VM PID in per-VM logs.
by Prerna Saxena 19 Jul '16

19 Jul '16

For certain situations such as Out-of-memory scenarios, it is helpful to record the QEMU PID in the per-VM logs, so that correlation with kernel-reported events is easier. While this is already recorded in libvirt daemon logs as a DEBUG message, I believe it merits more attention :-) Hence introducing it in per-VM log. Signed-off-by: Prerna Saxena <saxenap.ltc(a)gmail.com> --- src/qemu/qemu_process.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 4adb14e..2d3b0f5 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4983,6 +4983,7 @@ qemuProcessLaunch(virConnectPtr conn, int ret = -1; int rv; int logfile = -1; + char *msg_buffer = NULL; qemuDomainLogContextPtr logCtxt = NULL; qemuDomainObjPrivatePtr priv = vm->privateData; virCommandPtr cmd = NULL; @@ -5095,8 +5096,14 @@ qemuProcessLaunch(virConnectPtr conn, _("Domain %s didn't show up"), vm->def->name); rv = -1; } + VIR_DEBUG("QEMU vm=%p name=%s running with pid=%llu", vm, vm->def->name, (unsigned long long)vm->pid); + ignore_value(virAsprintf(&msg_buffer, + "QEMU vm=%p name=%s running with pid=%llu", + vm, vm->def->name, (unsigned long long)vm->pid)); + qemuLogOperation(vm, msg_buffer, NULL, logCtxt); + virFree(msg_buffer); } else { VIR_DEBUG("QEMU vm=%p name=%s failed to spawn", vm, vm->def->name); -- 1.8.1.2

2 1

[libvirt] [PATCH] virt-admin: Output srv-threadpool-info data as unsigned int rather than signed
by Erik Skultety 19 Jul '16

19 Jul '16

Internally, all the data are represented as unsigned int, it is also documented in the header file that users should use our exported constants that also indicate that the data should be unsigned int. However, when polling for the current server threadpool's configuration, virt-admin uses an incorrect formatting parameter '%d' for printf. Instead, virt-admin should use formatting parameter '%u'. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769 Signed-off-by: Erik Skultety <eskultet(a)redhat.com> --- tools/virt-admin.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/virt-admin.c b/tools/virt-admin.c index c4ee8f5..a59c4c7 100644 --- a/tools/virt-admin.c +++ b/tools/virt-admin.c @@ -458,7 +458,7 @@ cmdSrvThreadpoolInfo(vshControl *ctl, const vshCmd *cmd) } for (i = 0; i < nparams; i++) - vshPrint(ctl, "%-15s: %d\n", params[i].field, params[i].value.ui); + vshPrint(ctl, "%-15s: %u\n", params[i].field, params[i].value.ui); ret = true; -- 2.5.5

3 2

[libvirt] [PATCH 0/7] Error path cleanup for hotplug and one function move/rename
by John Ferlan 19 Jul '16

19 Jul '16

During review of the LUKS series: http://www.redhat.com/archives/libvir-list/2016-July/msg00488.html it was noted that the error paths should use bools rather than goto failxxx type labels. So this series does that for a few of the affect APIs. There's also changes to qemuDomainAttachMemory since it seems it wasn't properly handling 'props' at least w/r/t how qemuDomainAttachRNGDevice would clean things up. Finally - another part of the review noted that the qemu command line comma escaping could be made more available since the storage driver would potentially need it to build the qemuimg command line. So I moved to virqemu and renamed. John Ferlan (7): qemu: Alter error path cleanup for qemuDomainAttachHostSCSIDevice qemu: Alter error path cleanup for qemuDomainAttachVirtioDiskDevice qemu: Alter error path cleanup for qemuDomainAttachSCSIDisk qemu: Alter error path cleanup for qemuDomainAttachChrDevice qemu: Alter error path cleanup for qemuDomainAttachRNGDevice qemu: Alter error path cleanup for qemuDomainAttachMemory qemu: Move and rename qemuBufferEscapeComma src/libvirt_private.syms | 1 + src/qemu/qemu_command.c | 33 +++------- src/qemu/qemu_hotplug.c | 163 +++++++++++++++++++++++++++-------------------- src/util/virqemu.c | 15 +++++ src/util/virqemu.h | 2 + 5 files changed, 122 insertions(+), 92 deletions(-) -- 2.5.5

2 13

[libvirt] [PATCH 0/9] Various patches as a result of Coverity
by John Ferlan 19 Jul '16

19 Jul '16

Been piling up a few Coverity changes, the later patches aren't anything critical, but the first few are newer and it seems more likely to be hit in common paths. In particular, the first 2 are from recent virconf changes. John Ferlan (9): util: Fix incorrect VIR_FREE in virConfGetValueStringList tools: Fix comparison in virLoginShellGetShellArgv tests: Need to check return of virGetLastError conf: Need to check for glisten before accessing vsh: Properly initialize res esx: Replace strtok_r usage with virStringSplitCount conf: Add ignore_value to virDomainDeviceInfoIterate calls for Clear helpers openvz: Remove need for strtok_r in openvzGenerateContainerVethName openvz: Remove strtok_r calls from openvzReadNetworkConf src/conf/domain_conf.c | 12 ++++++--- src/esx/esx_vi.c | 61 ++++++++++++++++++++-------------------------- src/openvz/openvz_conf.c | 33 +++++++++++++++---------- src/openvz/openvz_driver.c | 16 ++++++++---- src/util/virconf.c | 2 +- tests/qemuhelptest.c | 4 ++- tools/virt-login-shell.c | 6 +++-- tools/vsh.c | 4 +-- 8 files changed, 76 insertions(+), 62 deletions(-) -- 2.5.5

2 11

[libvirt] Adding ips and routes to type="ethernet" devices
by Ruben Kerkhof 19 Jul '16

19 Jul '16

Hi all, I've been playing with the recently added support for adding ips and routes to a type"ethernet" kind of device. My goal is to get rid of bridging and use host routes (/32) combined with Bird for a pure layer3 setup. Something similar to what https://www.projectcalico.org/ is doing Instead of p2p addresses with peers they use device routes (ip route add 192.168.0.1/32 dev vnet0) combined with static arp entries. I am a bit stuck though. I've created the vm with a tap device: <interface type='ethernet'> <mac address='00:1a:4a:1b:d9:cc'/> <model type='virtio'/> <rom bar="off"/> <source> <ip address='192.168.42.41' family='ipv4' peer='192.168.42.42' prefix='32'/> <route family='ipv4' address='192.168.100.0' prefix='24' gateway='192.168.42.42'/> </source> </interface> After starting, the link stays down and no ips or routes are being created: root@test1: ~# ip link show dev vnet0 15: vnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether fe:1a:4a:1b:d9:cc brd ff:ff:ff:ff:ff:ff root@test1: ~# ip route show default via 10.10.5.1 dev br1010 10.10.5.0/24 dev br1010 proto kernel scope link src 10.10.5.2 I feel like I'm missing a step. Who is responsible for setting the link up, it this libvirtd, qemu, or do I need to write a qemu-ifup script? Any help is greatly appreciated. Kind regards, Ruben Kerkhof

2 2

[libvirt] [PATCH] Changes to support Veritas HyperScale (VxHS) block device protocol with qemu-kvm.
by Ashish Mittal 19 Jul '16

19 Jul '16

>From 9036f749f12d3bf4bf08e7e55b6d98109dd5e5c0 Mon Sep 17 00:00:00 2001 From: Ashish Mittal <ashish.mittal(a)veritas.com> Date: Mon, 18 Jul 2016 16:21:37 -0700 Subject: [PATCH] Changes to support Veritas HyperScale (VxHS) block device protocol with qemu-kvm. Changes to support Veritas HyperScale (VxHS) block device protocol with qemu-kvm. Sample XML for a vxhs vdisk is as follows: <disk type='network' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source protocol='vxhs' name='{f7dea4ad-b3b1-4a54-ad78-468b248ebdd8}'> <host name='172.172.17.2' port='9999'/> <host name='172.172.17.5' port='9999'/> </source> <backingStore/> <target dev='vda' bus='virtio'/> <serial>f7dea4ad-b3b1-4a54-ad78-468b248ebdd8</serial> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> --- docs/formatdomain.html.in | 12 +++-- docs/schemas/domaincommon.rng | 1 + src/qemu/qemu_command.c | 51 ++++++++++++++++++++++ src/qemu/qemu_driver.c | 3 ++ src/qemu/qemu_parse_command.c | 21 +++++++++ src/util/virstoragefile.c | 4 +- src/util/virstoragefile.h | 1 + .../qemuxml2argv-disk-drive-network-vxhs.args | 24 ++++++++++ .../qemuxml2argv-disk-drive-network-vxhs.xml | 35 +++++++++++++++ tests/qemuxml2argvtest.c | 1 + 10 files changed, 149 insertions(+), 4 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.xml diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 59a8bb9..13705fb 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -2171,9 +2171,9 @@ <dd> The <code>protocol</code> attribute specifies the protocol to access to the requested image. Possible values are "nbd", - "iscsi", "rbd", "sheepdog" or "gluster". If the - <code>protocol</code> attribute is "rbd", "sheepdog" or - "gluster", an additional attribute <code>name</code> is + "iscsi", "rbd", "sheepdog", "gluster" or "vxhs". If the + <code>protocol</code> attribute is "rbd", "sheepdog", "gluster" + or "vxhs", an additional attribute <code>name</code> is mandatory to specify which volume/image will be used. For "nbd", the <code>name</code> attribute is optional. For "iscsi" (<span class="since">since 1.0.4</span>), the <code>name</code> @@ -2283,6 +2283,12 @@ <td> only one </td> <td> 24007 </td> </tr> + <tr> + <td> vxhs </td> + <td> a server running Veritas HyperScale daemon </td> + <td> one or more </td> + <td> 9999 </td> + </tr> </table> <p> gluster supports "tcp", "rdma", "unix" as valid values for the diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 348dbfe..f279bf2 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -1416,6 +1416,7 @@ <value>ftp</value> <value>ftps</value> <value>tftp</value> + <value>vxhs</value> </choice> </attribute> <optional> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index fe4bb88..a52b78c 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -497,6 +497,7 @@ qemuNetworkDriveGetPort(int protocol, return 0; case VIR_STORAGE_NET_PROTOCOL_RBD: + case VIR_STORAGE_NET_PROTOCOL_VXHS: case VIR_STORAGE_NET_PROTOCOL_LAST: case VIR_STORAGE_NET_PROTOCOL_NONE: /* not applicable */ @@ -889,6 +890,56 @@ qemuBuildNetworkDriveURI(virStorageSourcePtr src, ret = virBufferContentAndReset(&buf); break; + case VIR_STORAGE_NET_PROTOCOL_VXHS: + if (VIR_ALLOC(uri) < 0) + goto cleanup; + + if (src->hosts->transport == VIR_STORAGE_NET_HOST_TRANS_TCP) { + if (VIR_STRDUP(uri->scheme, + virStorageNetProtocolTypeToString(src->protocol)) < 0) + goto cleanup; + } else { + if (virAsprintf(&uri->scheme, "%s+%s", + virStorageNetProtocolTypeToString(src->protocol), + virStorageNetHostTransportTypeToString(src->hosts->transport)) < 0) + goto cleanup; + } + + if (src->path) { + if (src->volume) { + if (virAsprintf(&uri->path, "/%s%s", + src->volume, src->path) < 0) + goto cleanup; + } else { + if (virAsprintf(&uri->path, "%s%s", + src->path[0] == '/' ? "" : "/", + src->path) < 0) + goto cleanup; + } + } + + if (src->hosts->socket && + virAsprintf(&uri->query, "socket=%s", src->hosts->socket) < 0) + goto cleanup; + + if (qemuBuildGeneralSecinfoURI(uri, secinfo) < 0) + goto cleanup; + + for (i = 0; i < src->nhosts; i++) { + if ((uri->port = qemuNetworkDriveGetPort(src->protocol, src->hosts[i].port)) < 0) + goto cleanup; + + if (VIR_STRDUP(uri->server, src->hosts[i].name) < 0) + goto cleanup; + + ret = virURIFormat(uri); + virBufferEscape(&buf, ',', ",", "%s", ret); + virReportError(VIR_ERR_INTERNAL_ERROR, + _("qemuBuildVxHSString builturi '%s'"), ret); + } + + ret = virBufferContentAndReset(&buf); + break; case VIR_STORAGE_NET_PROTOCOL_LAST: case VIR_STORAGE_NET_PROTOCOL_NONE: diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index cda85f6..1fdc8b0 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -13359,6 +13359,7 @@ qemuDomainSnapshotPrepareDiskExternalBackingInactive(virDomainDiskDefPtr disk) case VIR_STORAGE_NET_PROTOCOL_FTP: case VIR_STORAGE_NET_PROTOCOL_FTPS: case VIR_STORAGE_NET_PROTOCOL_TFTP: + case VIR_STORAGE_NET_PROTOCOL_VXHS: case VIR_STORAGE_NET_PROTOCOL_LAST: virReportError(VIR_ERR_INTERNAL_ERROR, _("external inactive snapshots are not supported on " @@ -13421,6 +13422,7 @@ qemuDomainSnapshotPrepareDiskExternalOverlayActive(virDomainSnapshotDiskDefPtr d case VIR_STORAGE_NET_PROTOCOL_FTP: case VIR_STORAGE_NET_PROTOCOL_FTPS: case VIR_STORAGE_NET_PROTOCOL_TFTP: + case VIR_STORAGE_NET_PROTOCOL_VXHS: case VIR_STORAGE_NET_PROTOCOL_LAST: virReportError(VIR_ERR_INTERNAL_ERROR, _("external active snapshots are not supported on " @@ -13565,6 +13567,7 @@ qemuDomainSnapshotPrepareDiskInternal(virConnectPtr conn, case VIR_STORAGE_NET_PROTOCOL_FTP: case VIR_STORAGE_NET_PROTOCOL_FTPS: case VIR_STORAGE_NET_PROTOCOL_TFTP: + case VIR_STORAGE_NET_PROTOCOL_VXHS: case VIR_STORAGE_NET_PROTOCOL_LAST: virReportError(VIR_ERR_INTERNAL_ERROR, _("internal inactive snapshots are not supported on " diff --git a/src/qemu/qemu_parse_command.c b/src/qemu/qemu_parse_command.c index 3f7e445..65d9983 100644 --- a/src/qemu/qemu_parse_command.c +++ b/src/qemu/qemu_parse_command.c @@ -263,6 +263,16 @@ qemuParseNBDString(virDomainDiskDefPtr disk) return -1; } +static int +qemuParseVxHSString(virDomainDiskDefPtr def) +{ + virURIPtr uri = NULL; + + if (!(uri = virURIParse(def->src->path))) + return -1; + + return qemuParseDriveURIString(def, uri, "vxhs"); +} /* * This method takes a string representing a QEMU command line ARGV set @@ -737,6 +747,12 @@ qemuParseCommandLineDisk(virDomainXMLOptionPtr xmlopt, if (VIR_STRDUP(def->src->path, vdi) < 0) goto error; } + } else if (STRPREFIX(def->src->path, "vxhs:")) { + def->src->type = VIR_STORAGE_TYPE_NETWORK; + def->src->protocol = VIR_STORAGE_NET_PROTOCOL_VXHS; + + if (qemuParseVxHSString(def) < 0) + goto error; } else { def->src->type = VIR_STORAGE_TYPE_FILE; } @@ -2009,6 +2025,11 @@ qemuParseCommandLine(virCapsPtr caps, goto error; break; + case VIR_STORAGE_NET_PROTOCOL_VXHS: + if (qemuParseVxHSString(disk) < 0) + goto error; + + break; case VIR_STORAGE_NET_PROTOCOL_HTTP: case VIR_STORAGE_NET_PROTOCOL_HTTPS: case VIR_STORAGE_NET_PROTOCOL_FTP: diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c index 16de603..11f9b2c 100644 --- a/src/util/virstoragefile.c +++ b/src/util/virstoragefile.c @@ -83,7 +83,8 @@ VIR_ENUM_IMPL(virStorageNetProtocol, VIR_STORAGE_NET_PROTOCOL_LAST, "https", "ftp", "ftps", - "tftp") + "tftp", + "vxhs") VIR_ENUM_IMPL(virStorageNetHostTransport, VIR_STORAGE_NET_HOST_TRANS_LAST, "tcp", @@ -2500,6 +2501,7 @@ virStorageSourceParseBackingColon(virStorageSourcePtr src, case VIR_STORAGE_NET_PROTOCOL_TFTP: case VIR_STORAGE_NET_PROTOCOL_ISCSI: case VIR_STORAGE_NET_PROTOCOL_GLUSTER: + case VIR_STORAGE_NET_PROTOCOL_VXHS: virReportError(VIR_ERR_INTERNAL_ERROR, _("malformed backing store path for protocol %s"), protocol); diff --git a/src/util/virstoragefile.h b/src/util/virstoragefile.h index 78beaf4..586d843 100644 --- a/src/util/virstoragefile.h +++ b/src/util/virstoragefile.h @@ -132,6 +132,7 @@ typedef enum { VIR_STORAGE_NET_PROTOCOL_FTP, VIR_STORAGE_NET_PROTOCOL_FTPS, VIR_STORAGE_NET_PROTOCOL_TFTP, + VIR_STORAGE_NET_PROTOCOL_VXHS, VIR_STORAGE_NET_PROTOCOL_LAST } virStorageNetProtocol; diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.args b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.args new file mode 100644 index 0000000..3553bad --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.args @@ -0,0 +1,24 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/home/test \ +USER=test \ +LOGNAME=test \ +QEMU_AUDIO_DRV=none \ +/usr/libexec/qemu-kvm \ +-name QEMUGuest1 \ +-S \ +-M pc \ +-cpu qemu32 \ +-m 214 \ +-smp 1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-nographic \ +-nodefaults \ +-monitor unix:/tmp/lib/domain--1-QEMUGuest1/monitor.sock,server,nowait \ +-no-acpi \ +-boot c \ +-usb \ +-drive file=vxhs://192.168.0.1:9999/%7Beb90327c-8302-4725-9e1b-4e85ed4dc251%7D\ +vxhs://172.172.17.56:9999/%7Beb90327c-8302-4725-9e1b-4e85ed4dc251%7D,\ +format=raw,if=none,id=drive-virtio-disk0,cache=none \ +-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.xml new file mode 100644 index 0000000..6ef2d98 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-vxhs.xml @@ -0,0 +1,35 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/libexec/qemu-kvm</emulator> + <disk type='network' device='disk'> + <driver name='qemu' type='raw' cache='none'/> + <source protocol='vxhs' name='{eb90327c-8302-4725-9e1b-4e85ed4dc251}'> + <host name='192.168.0.1' port='9999'/> + <host name='172.172.17.56' port='9999'/> + </source> + <backingStore/> + <target dev='vda' bus='virtio'/> + <serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial> + <alias name='virtio-disk0'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </disk> + <controller type='usb' index='0'/> + <controller type='pci' index='0' model='pci-root'/> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <memballoon model='none'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index e0d07e8..13ef4e4 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -801,6 +801,7 @@ mymain(void) # endif DO_TEST("disk-drive-network-rbd-ipv6", NONE); DO_TEST_FAILURE("disk-drive-network-rbd-no-colon", NONE); + DO_TEST("disk-drive-network-vxhs", NONE); DO_TEST("disk-drive-no-boot", QEMU_CAPS_BOOTINDEX); DO_TEST_PARSE_ERROR("disk-device-lun-type-invalid", -- 2.5.4 (Apple Git-61)

2 1

[libvirt] [PATCH] fs: Fix '<' comparison of value produced by logical not '!'
by Erik Skultety 19 Jul '16

19 Jul '16

Commit da665fbd introduced the following condition to virLXCProcessEnsureRootFS and openvzReadFSConf: if (!(<some_var> = virDomainFSDefNew()) < 0) which broke the build on fedora with GCC 5.3.1: "logical not is only applied to the left hand side of comparison". Signed-off-by: Erik Skultety <eskultet(a)redhat.com> --- Pushed under the build breaker rule. src/lxc/lxc_process.c | 2 +- src/openvz/openvz_conf.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c index 6761394..7703fe1 100644 --- a/src/lxc/lxc_process.c +++ b/src/lxc/lxc_process.c @@ -1153,7 +1153,7 @@ virLXCProcessEnsureRootFS(virDomainObjPtr vm) if (root) return 0; - if (!(root = virDomainFSDefNew()) < 0) + if (!(root = virDomainFSDefNew())) goto error; root->type = VIR_DOMAIN_FS_TYPE_MOUNT; diff --git a/src/openvz/openvz_conf.c b/src/openvz/openvz_conf.c index cb30b32..9b820a9 100644 --- a/src/openvz/openvz_conf.c +++ b/src/openvz/openvz_conf.c @@ -351,7 +351,7 @@ openvzReadFSConf(virDomainDefPtr def, veid); goto error; } else if (ret > 0) { - if (!(fs = virDomainFSDefNew()) < 0) + if (!(fs = virDomainFSDefNew())) goto error; fs->type = VIR_DOMAIN_FS_TYPE_TEMPLATE; -- 2.5.5

1 0

[libvirt] [PATCH] security: compilation error due to wrong parameter for vah_add_path().
by Julio Faracco 19 Jul '16

19 Jul '16

The commit da665fbd introduced virStorageSourcePtr inside the structure _virDomainFSDef. This is causing an error when libvirt is being compiled. make[3]: Entering directory `/media/julio/8d65c59c-6ade-4740-9cdc-38016a4cb8ae /home/julio/Desktop/virt/libvirt/src' CC security/virt_aa_helper-virt-aa-helper.o security/virt-aa-helper.c: In function 'get_files': security/virt-aa-helper.c:1087:13: error: passing argument 2 of 'vah_add_path' from incompatible pointer type [-Werror] if (vah_add_path(&buf, fs->src, "rw", true) != 0) ^ security/virt-aa-helper.c:732:1: note: expected 'const char *' but argument is of type 'virStorageSourcePtr' vah_add_path(virBufferPtr buf, const char *path, const char *perms, bool recursive) ^ cc1: all warnings being treated as errors Adding the attribute "path" from virStorageSourcePtr fixes this issue. Signed-off-by: Julio Faracco <jcfaracco(a)gmail.com> --- src/security/virt-aa-helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/security/virt-aa-helper.c b/src/security/virt-aa-helper.c index 9eafaee..805d7d7 100644 --- a/src/security/virt-aa-helper.c +++ b/src/security/virt-aa-helper.c @@ -1084,7 +1084,7 @@ get_files(vahControl * ctl) /* We don't need to add deny rw rules for readonly mounts, * this can only lead to troubles when mounting / readonly. */ - if (vah_add_path(&buf, fs->src, "rw", true) != 0) + if (vah_add_path(&buf, fs->src->path, "rw", true) != 0) goto cleanup; } } -- 1.9.1

2 1