- Devel - libvirt List Archives

[libvirt] [PATCH v3 0/3] Alter qemu live/cold device attach algorithm
by John Ferlan 25 Jul '18

25 Jul '18

v2: https://www.redhat.com/archives/libvir-list/2018-July/msg00361.html Differences to v2: Patch1: NEW - As a result of code review the suggestion was to utilize the virDomainDefCompatibleDevice in order to make the check more generic to include <disk>'s which were also afflicted with the same problem that I was trying to solve with the former patch1 just for <hostdev>'s. However, this led me down into the abyss of more changes since <disk>'s have multiple <address type='drive'...> target bus types (IDE and SCSI). That means we need to have a mechanism to pass the target bus along so that a SCSI drive address doesn't inadvertently match an IDE drive address. All that is complicated by the way virDomainDefHasDeviceAddress iterates through all the device lists. Whether there are more similar devices I'm assuming will fall out of code review. Patch2: This moves the virDomainDefHasDeviceAddress into the more common config checking virDomainDefCompatibleDevice method, but now needs to also account for the disk bus issue. This theoretically could be combined with Patch1, but keeping them separate I would hope makes for simpler code review. I could also move code out of virDomainDefHasDeviceAddressIterator into patch2, but if just felt better in patch1. Patch3: No changes were made (amazingly so). In the end quite a bit more complicated John Ferlan (3): conf: Add @target_bus to virDomainDefHasDeviceAddress qemu: Check for existing address when cold attach device qemu: Use the correct vm def on cold attach src/conf/domain_conf.c | 54 +++++++++++++++++++++++++++++++++++--- src/conf/domain_conf.h | 3 ++- src/qemu/qemu_driver.c | 59 ++++++++++++++++-------------------------- 3 files changed, 75 insertions(+), 41 deletions(-) -- 2.17.1

3 8

[libvirt] [PATCH 0/2] Allow for further expected failures when listening on sockets
by Daniel P. Berrangé 25 Jul '18

25 Jul '18

Daniel P. Berrangé (2): socket: preserve real errno when socket/bind calls fail rpc: treat EADDRNOTAVAIL as non-fatal when listening src/rpc/virnetsocket.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) -- 2.17.1

2 5

[libvirt] [PATCH v3 0/2] Support network stats for VF representor interface
by Jai Singh Rana 25 Jul '18

25 Jul '18

With availability of switchdev model in linux, it is possible to capture stats for SR-IOV device with interface_type as 'hostdev' provided device supports VF represontor in switchdev mode[1] on host. These stats are supported by adding helper APIs for getting/verifying VF representor name based on PCI Bus:Device:Function information in domains 'hostdev' structure and querying required net sysfs directory and file entries on host according to switchdev model. These helper APIs are then used in qemu/conf to get the interface stats for VF representor on host of pci SR-IOV device. [1] https://www.kernel.org/doc/Documentation/networking/switchdev.txt V2 https://www.redhat.com/archives/libvir-list/2018-February/msg00561.html Jai Singh Rana (2): util: Add helper APIs to get/verify VF Representor name qemu: conf: Network stats support for VF Representors docs/news.xml | 9 ++ po/POTFILES.in | 1 + src/conf/domain_conf.c | 15 ++ src/libvirt_private.syms | 7 + src/qemu/qemu_driver.c | 33 +++- src/util/Makefile.inc.am | 2 + src/util/virhostdev.c | 2 +- src/util/virhostdev.h | 8 + src/util/virnetdevhostdev.c | 374 ++++++++++++++++++++++++++++++++++++++++++++ src/util/virnetdevhostdev.h | 35 +++++ 10 files changed, 481 insertions(+), 5 deletions(-) create mode 100644 src/util/virnetdevhostdev.c create mode 100644 src/util/virnetdevhostdev.h -- 2.13.6

3 5

[libvirt] [PATCHv3] replace 'if' type conditions with 'switch' for VIR_NETWORK_FORWARD_
by Shi Lei 25 Jul '18

25 Jul '18

Signed-off-by: Shi Lei <shilei.massclouds(a)gmx.com> --- v2 here: https://www.redhat.com/archives/libvir-list/2018-July/msg01423.html since v2: - typecast def->forward.type to virNetworkForwardType explicitly in all the switches rather than change its type to enum in the struct definition v1 here: https://www.redhat.com/archives/libvir-list/2018-July/msg01314.html since v1: - Change the type declaration of _virNetworkForwardDef.type from int to virNetworkForwardType - use the default case to report out of range error with virReportEnumRangeError src/conf/domain_conf.c | 49 ++++--- src/conf/network_conf.c | 75 +++++++--- src/conf/virnetworkobj.c | 24 +++- src/esx/esx_network_driver.c | 19 ++- src/libvirt_private.syms | 1 + src/network/bridge_driver.c | 317 ++++++++++++++++++++++++++++--------------- src/qemu/qemu_process.c | 10 +- 7 files changed, 334 insertions(+), 161 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 178c6d2..33b0b4a 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -29975,40 +29975,49 @@ virDomainNetResolveActualType(virDomainNetDefPtr iface) if (!(def = virNetworkDefParseString(xml))) goto cleanup; - if ((def->forward.type == VIR_NETWORK_FORWARD_NONE) || - (def->forward.type == VIR_NETWORK_FORWARD_NAT) || - (def->forward.type == VIR_NETWORK_FORWARD_ROUTE) || - (def->forward.type == VIR_NETWORK_FORWARD_OPEN)) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: /* for these forward types, the actual net type really *is* * NETWORK; we just keep the info from the portgroup in * iface->data.network.actual */ ret = VIR_DOMAIN_NET_TYPE_NETWORK; + break; - } else if ((def->forward.type == VIR_NETWORK_FORWARD_BRIDGE) && - def->bridge) { - - /* <forward type='bridge'/> <bridge name='xxx'/> - * is VIR_DOMAIN_NET_TYPE_BRIDGE - */ - - ret = VIR_DOMAIN_NET_TYPE_BRIDGE; - - } else if (def->forward.type == VIR_NETWORK_FORWARD_HOSTDEV) { - + case VIR_NETWORK_FORWARD_HOSTDEV: ret = VIR_DOMAIN_NET_TYPE_HOSTDEV; + break; - } else if ((def->forward.type == VIR_NETWORK_FORWARD_BRIDGE) || - (def->forward.type == VIR_NETWORK_FORWARD_PRIVATE) || - (def->forward.type == VIR_NETWORK_FORWARD_VEPA) || - (def->forward.type == VIR_NETWORK_FORWARD_PASSTHROUGH)) { + case VIR_NETWORK_FORWARD_BRIDGE: + if (def->bridge) { + /* <forward type='bridge'/> <bridge name='xxx'/> + * is VIR_DOMAIN_NET_TYPE_BRIDGE + */ + ret = VIR_DOMAIN_NET_TYPE_BRIDGE; + break; + } + + /* intentionally fall through to the direct case for + * VIR_NETWORK_FORWARD_BRIDGE with no bridge device defined + */ + ATTRIBUTE_FALLTHROUGH; + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: /* <forward type='bridge|private|vepa|passthrough'> are all * VIR_DOMAIN_NET_TYPE_DIRECT. */ - ret = VIR_DOMAIN_NET_TYPE_DIRECT; + break; + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } cleanup: diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index 630a87f..c08456b 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -1874,7 +1874,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) /* Validate some items in the main NetworkDef that need to align * with the chosen forward mode. */ - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: break; @@ -1955,21 +1955,40 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt) goto error; } break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; } VIR_FREE(stp); - if (def->mtu && - (def->forward.type != VIR_NETWORK_FORWARD_NONE && - def->forward.type != VIR_NETWORK_FORWARD_NAT && - def->forward.type != VIR_NETWORK_FORWARD_ROUTE && - def->forward.type != VIR_NETWORK_FORWARD_OPEN)) { - virReportError(VIR_ERR_XML_ERROR, - _("mtu size only allowed in open, route, nat, " - "and isolated mode, not in %s (network '%s')"), - virNetworkForwardTypeToString(def->forward.type), - def->name); - goto error; + if (def->mtu) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + virReportError(VIR_ERR_XML_ERROR, + _("mtu size only allowed in open, route, nat, " + "and isolated mode, not in %s (network '%s')"), + virNetworkForwardTypeToString(def->forward.type), + def->name); + goto error; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; + } } /* Extract custom metadata */ @@ -2349,6 +2368,7 @@ virNetworkDefFormatBuf(virBufferPtr buf, char uuidstr[VIR_UUID_STRING_BUFLEN]; size_t i; bool shortforward; + bool hasbridge = false; virBufferAddLit(buf, "<network"); if (!(flags & VIR_NETWORK_XML_INACTIVE) && (def->connections > 0)) @@ -2469,22 +2489,33 @@ virNetworkDefFormatBuf(virBufferPtr buf, virBufferAddLit(buf, "</forward>\n"); } + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + hasbridge = true; + break; - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN || - def->bridge || def->macTableManager) { + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; + } + + if (hasbridge || def->bridge || def->macTableManager) { virBufferAddLit(buf, "<bridge"); virBufferEscapeString(buf, " name='%s'", def->bridge); - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN) { + if (hasbridge) virBufferAsprintf(buf, " stp='%s' delay='%ld'", def->stp ? "on" : "off", def->delay); - } if (def->macTableManager) { virBufferAsprintf(buf, " macTableManager='%s'", virNetworkBridgeMACTableManagerTypeToString(def->macTableManager)); diff --git a/src/conf/virnetworkobj.c b/src/conf/virnetworkobj.c index e00c8a7..b13e5a7 100644 --- a/src/conf/virnetworkobj.c +++ b/src/conf/virnetworkobj.c @@ -1009,19 +1009,31 @@ virNetworkLoadConfig(virNetworkObjListPtr nets, goto error; } - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN) { - + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: if (!def->mac_specified) { virNetworkSetBridgeMacAddr(def); virNetworkSaveConfig(configDir, def); } - } else { + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: /* Throw away MAC address for other forward types, * which could have been generated by older libvirt RPMs */ def->mac_specified = false; + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto error; } if (!(obj = virNetworkObjAssignDef(nets, def, 0))) diff --git a/src/esx/esx_network_driver.c b/src/esx/esx_network_driver.c index 04118b4..31bceb7 100644 --- a/src/esx/esx_network_driver.c +++ b/src/esx/esx_network_driver.c @@ -326,12 +326,27 @@ esxNetworkDefineXML(virConnectPtr conn, const char *xml) } /* FIXME: Add support for NAT */ - if (def->forward.type != VIR_NETWORK_FORWARD_NONE && - def->forward.type != VIR_NETWORK_FORWARD_BRIDGE) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_BRIDGE: + break; + + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("Unsupported forward mode '%s'"), virNetworkForwardTypeToString(def->forward.type)); goto cleanup; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } /* Verify that specified HostPortGroups don't exist already */ diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 1a4cf98..fc386e1 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -2369,6 +2369,7 @@ virNetDevMacVLanCreate; virNetDevMacVLanCreateWithVPortProfile; virNetDevMacVLanDelete; virNetDevMacVLanDeleteWithVPortProfile; +virNetDevMacVLanModeTypeFromString; virNetDevMacVLanReleaseName; virNetDevMacVLanReserveName; virNetDevMacVLanRestartWithVPortProfile; diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index da3c32e..ed8a8bf 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -446,7 +446,7 @@ networkUpdateState(virNetworkObjPtr obj, } def = virNetworkObjGetDef(obj); - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: case VIR_NETWORK_FORWARD_ROUTE: @@ -485,6 +485,11 @@ networkUpdateState(virNetworkObjPtr obj, case VIR_NETWORK_FORWARD_HOSTDEV: /* so far no extra checks */ break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } /* Try and read dnsmasq/radvd pids of active networks */ @@ -2088,20 +2093,37 @@ networkRefreshDaemonsHelper(virNetworkObjPtr obj, virObjectLock(obj); def = virNetworkObjGetDef(obj); - if (virNetworkObjIsActive(obj) && - ((def->forward.type == VIR_NETWORK_FORWARD_NONE) || - (def->forward.type == VIR_NETWORK_FORWARD_NAT) || - (def->forward.type == VIR_NETWORK_FORWARD_ROUTE) || - (def->forward.type == VIR_NETWORK_FORWARD_OPEN))) { - /* Only the three L3 network types that are configured by - * libvirt will have a dnsmasq or radvd daemon associated - * with them. Here we send a SIGHUP to an existing - * dnsmasq and/or radvd, or restart them if they've - * disappeared. - */ - networkRefreshDhcpDaemon(driver, obj); - networkRefreshRadvd(driver, obj); + if (virNetworkObjIsActive(obj)) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + /* Only the three L3 network types that are configured by + * libvirt will have a dnsmasq or radvd daemon associated + * with them. Here we send a SIGHUP to an existing + * dnsmasq and/or radvd, or restart them if they've + * disappeared. + */ + networkRefreshDhcpDaemon(driver, obj); + networkRefreshRadvd(driver, obj); + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; + } } + + cleanup: virObjectUnlock(obj); return 0; } @@ -2128,20 +2150,37 @@ networkReloadFirewallRulesHelper(virNetworkObjPtr obj, virObjectLock(obj); def = virNetworkObjGetDef(obj); - if (virNetworkObjIsActive(obj) && - ((def->forward.type == VIR_NETWORK_FORWARD_NONE) || - (def->forward.type == VIR_NETWORK_FORWARD_NAT) || - (def->forward.type == VIR_NETWORK_FORWARD_ROUTE))) { - /* Only three of the L3 network types that are configured by - * libvirt need to have iptables rules reloaded. The 4th L3 - * network type, forward='open', doesn't need this because it - * has no iptables rules. - */ - networkRemoveFirewallRules(def); - if (networkAddFirewallRules(def) < 0) { - /* failed to add but already logged */ + if (virNetworkObjIsActive(obj)) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + /* Only three of the L3 network types that are configured by + * libvirt need to have iptables rules reloaded. The 4th L3 + * network type, forward='open', doesn't need this because it + * has no iptables rules. + */ + networkRemoveFirewallRules(def); + /* No need to check return value since already logged internally */ + ignore_value(networkAddFirewallRules(def)); + break; + + case VIR_NETWORK_FORWARD_OPEN: + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } } + + cleanup: virObjectUnlock(obj); return 0; } @@ -2687,7 +2726,7 @@ networkCreateInterfacePool(virNetworkDefPtr netdef) virNetworkForwardIfDefPtr thisIf = &netdef->forward.ifs[netdef->forward.nifs]; - switch (netdef->forward.type) { + switch ((virNetworkForwardType) netdef->forward.type) { case VIR_NETWORK_FORWARD_BRIDGE: case VIR_NETWORK_FORWARD_PRIVATE: case VIR_NETWORK_FORWARD_VEPA: @@ -2719,9 +2758,13 @@ networkCreateInterfacePool(virNetworkDefPtr netdef) case VIR_NETWORK_FORWARD_NAT: case VIR_NETWORK_FORWARD_ROUTE: case VIR_NETWORK_FORWARD_OPEN: - case VIR_NETWORK_FORWARD_LAST: /* by definition these will never be encountered here */ break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); + goto cleanup; } } @@ -2811,7 +2854,7 @@ networkStartNetwork(virNetworkDriverStatePtr driver, VIR_HOOK_SUBOP_BEGIN) < 0) goto cleanup; - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: @@ -2840,6 +2883,11 @@ networkStartNetwork(virNetworkDriverStatePtr driver, if (networkStartNetworkExternal(obj) < 0) goto cleanup; break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } /* finally we can call the 'started' hook script if any */ @@ -2893,7 +2941,7 @@ networkShutdownNetwork(virNetworkDriverStatePtr driver, unlink(stateFile); VIR_FREE(stateFile); - switch (def->forward.type) { + switch ((virNetworkForwardType) def->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: @@ -2919,6 +2967,11 @@ networkShutdownNetwork(virNetworkDriverStatePtr driver, case VIR_NETWORK_FORWARD_HOSTDEV: ret = networkShutdownNetworkExternal(obj); break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + return -1; } /* now that we know it's stopped call the hook if present */ @@ -3273,11 +3326,11 @@ networkValidate(virNetworkDriverStatePtr driver, /* Only the three L3 network types that are configured by libvirt * need to have a bridge device name / mac address provided */ - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE || - def->forward.type == VIR_NETWORK_FORWARD_OPEN) { - + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: /* if no bridge name was given in the config, find a name * unused by any other libvirt networks and assign it. */ @@ -3285,7 +3338,13 @@ networkValidate(virNetworkDriverStatePtr driver, return -1; virNetworkSetBridgeMacAddr(def); - } else { + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: /* They are also the only types that currently support setting * a MAC or IP address for the host-side device (bridge), DNS * configuration, or network-wide bandwidth limits. @@ -3331,6 +3390,12 @@ networkValidate(virNetworkDriverStatePtr driver, return -1; } bandwidthAllowed = false; + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + return -1; } /* we support configs with a single PF defined: @@ -3755,9 +3820,10 @@ networkUpdate(virNetworkPtr net, /* Take care of anything that must be done before updating the * live NetworkDef. */ - if (def->forward.type == VIR_NETWORK_FORWARD_NONE || - def->forward.type == VIR_NETWORK_FORWARD_NAT || - def->forward.type == VIR_NETWORK_FORWARD_ROUTE) { + switch ((virNetworkForwardType) def->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: switch (section) { case VIR_NETWORK_SECTION_FORWARD: case VIR_NETWORK_SECTION_FORWARD_INTERFACE: @@ -3768,14 +3834,26 @@ networkUpdate(virNetworkPtr net, * old rules (and remember to load new ones after the * update). */ - if (def->forward.type != VIR_NETWORK_FORWARD_OPEN) { - networkRemoveFirewallRules(def); - needFirewallRefresh = true; - } + networkRemoveFirewallRules(def); + needFirewallRefresh = true; break; default: break; } + break; + + case VIR_NETWORK_FORWARD_OPEN: + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, def->forward.type); + goto cleanup; } } @@ -4440,10 +4518,11 @@ networkAllocateActualDevice(virDomainDefPtr dom, iface->data.network.actual->trustGuestRxFilters = netdef->trustGuestRxFilters; - if ((netdef->forward.type == VIR_NETWORK_FORWARD_NONE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_NAT) || - (netdef->forward.type == VIR_NETWORK_FORWARD_ROUTE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_OPEN)) { + switch ((virNetworkForwardType) netdef->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: /* for these forward types, the actual net type really *is* * NETWORK; we just keep the info from the portgroup in * iface->data.network.actual @@ -4463,46 +4542,9 @@ networkAllocateActualDevice(virDomainDefPtr dom, if (networkPlugBandwidth(obj, iface) < 0) goto error; + break; - } else if ((netdef->forward.type == VIR_NETWORK_FORWARD_BRIDGE) && - netdef->bridge) { - - /* <forward type='bridge'/> <bridge name='xxx'/> - * is VIR_DOMAIN_NET_TYPE_BRIDGE - */ - - iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_BRIDGE; - if (VIR_STRDUP(iface->data.network.actual->data.bridge.brname, - netdef->bridge) < 0) - goto error; - iface->data.network.actual->data.bridge.macTableManager - = netdef->macTableManager; - - /* merge virtualports from interface, network, and portgroup to - * arrive at actual virtualport to use - */ - if (virNetDevVPortProfileMerge3(&iface->data.network.actual->virtPortProfile, - iface->virtPortProfile, - netdef->virtPortProfile, - portgroup - ? portgroup->virtPortProfile : NULL) < 0) { - goto error; - } - virtport = iface->data.network.actual->virtPortProfile; - if (virtport) { - /* only type='openvswitch' is allowed for bridges */ - if (virtport->virtPortType != VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("<virtualport type='%s'> not supported for network " - "'%s' which uses a bridge device"), - virNetDevVPortTypeToString(virtport->virtPortType), - netdef->name); - goto error; - } - } - - } else if (netdef->forward.type == VIR_NETWORK_FORWARD_HOSTDEV) { - + case VIR_NETWORK_FORWARD_HOSTDEV: { virDomainHostdevSubsysPCIBackendType backend; iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_HOSTDEV; @@ -4575,32 +4617,67 @@ networkAllocateActualDevice(virDomainDefPtr dom, goto error; } } + break; + } + + case VIR_NETWORK_FORWARD_BRIDGE: + if (netdef->bridge) { + /* <forward type='bridge'/> <bridge name='xxx'/> + * is VIR_DOMAIN_NET_TYPE_BRIDGE + */ + + iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_BRIDGE; + if (VIR_STRDUP(iface->data.network.actual->data.bridge.brname, + netdef->bridge) < 0) + goto error; + iface->data.network.actual->data.bridge.macTableManager + = netdef->macTableManager; + + /* merge virtualports from interface, network, and portgroup to + * arrive at actual virtualport to use + */ + if (virNetDevVPortProfileMerge3(&iface->data.network.actual->virtPortProfile, + iface->virtPortProfile, + netdef->virtPortProfile, + portgroup + ? portgroup->virtPortProfile : NULL) < 0) { + goto error; + } + virtport = iface->data.network.actual->virtPortProfile; + if (virtport) { + /* only type='openvswitch' is allowed for bridges */ + if (virtport->virtPortType != VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("<virtualport type='%s'> not supported for network " + "'%s' which uses a bridge device"), + virNetDevVPortTypeToString(virtport->virtPortType), + netdef->name); + goto error; + } + } + break; + } - } else if ((netdef->forward.type == VIR_NETWORK_FORWARD_BRIDGE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_PRIVATE) || - (netdef->forward.type == VIR_NETWORK_FORWARD_VEPA) || - (netdef->forward.type == VIR_NETWORK_FORWARD_PASSTHROUGH)) { + /* intentionally fall through to the direct case for + * VIR_NETWORK_FORWARD_BRIDGE with no bridge device defined + */ + ATTRIBUTE_FALLTHROUGH; + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: /* <forward type='bridge|private|vepa|passthrough'> are all * VIR_DOMAIN_NET_TYPE_DIRECT. */ /* Set type=direct and appropriate <source mode='xxx'/> */ iface->data.network.actual->type = actualType = VIR_DOMAIN_NET_TYPE_DIRECT; - switch (netdef->forward.type) { - case VIR_NETWORK_FORWARD_BRIDGE: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_BRIDGE; - break; - case VIR_NETWORK_FORWARD_PRIVATE: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_PRIVATE; - break; - case VIR_NETWORK_FORWARD_VEPA: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_VEPA; - break; - case VIR_NETWORK_FORWARD_PASSTHROUGH: - iface->data.network.actual->data.direct.mode = VIR_NETDEV_MACVLAN_MODE_PASSTHRU; - break; - } + + /* NO need to check the value returned from virNetDevMacVLanModeTypeFromString + * it must be valid for these forward type(bridge|private|vepa|passthrough) + */ + iface->data.network.actual->data.direct.mode = + virNetDevMacVLanModeTypeFromString(virNetworkForwardTypeToString(netdef->forward.type)); /* merge virtualports from interface, network, and portgroup to * arrive at actual virtualport to use @@ -4680,6 +4757,12 @@ networkAllocateActualDevice(virDomainDefPtr dom, dev->device.dev) < 0) goto error; } + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); + goto error; } if (virNetworkObjMacMgrAdd(obj, driver->dnsmasqStateDir, @@ -5037,13 +5120,27 @@ networkReleaseActualDevice(virDomainDefPtr dom, } netdef = virNetworkObjGetDef(obj); - if (iface->data.network.actual && - (netdef->forward.type == VIR_NETWORK_FORWARD_NONE || - netdef->forward.type == VIR_NETWORK_FORWARD_NAT || - netdef->forward.type == VIR_NETWORK_FORWARD_ROUTE || - netdef->forward.type == VIR_NETWORK_FORWARD_OPEN) && - networkUnplugBandwidth(obj, iface) < 0) + switch ((virNetworkForwardType) netdef->forward.type) { + case VIR_NETWORK_FORWARD_NONE: + case VIR_NETWORK_FORWARD_NAT: + case VIR_NETWORK_FORWARD_ROUTE: + case VIR_NETWORK_FORWARD_OPEN: + if (iface->data.network.actual && networkUnplugBandwidth(obj, iface) < 0) + goto error; + break; + + case VIR_NETWORK_FORWARD_BRIDGE: + case VIR_NETWORK_FORWARD_PRIVATE: + case VIR_NETWORK_FORWARD_VEPA: + case VIR_NETWORK_FORWARD_PASSTHROUGH: + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); goto error; + } if ((!iface->data.network.actual) || ((actualType != VIR_DOMAIN_NET_TYPE_DIRECT) && diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index bba157b..27bd8b9 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4545,7 +4545,7 @@ qemuProcessGetNetworkAddress(const char *netname, if (!netdef) goto cleanup; - switch (netdef->forward.type) { + switch ((virNetworkForwardType) netdef->forward.type) { case VIR_NETWORK_FORWARD_NONE: case VIR_NETWORK_FORWARD_NAT: case VIR_NETWORK_FORWARD_ROUTE: @@ -4582,6 +4582,14 @@ qemuProcessGetNetworkAddress(const char *netname, goto cleanup; } break; + + case VIR_NETWORK_FORWARD_HOSTDEV: + break; + + case VIR_NETWORK_FORWARD_LAST: + default: + virReportEnumRangeError(virNetworkForwardType, netdef->forward.type); + goto cleanup; } if (dev_name) { -- 2.7.4

2 2

[libvirt] [go PATCH] travis: update some of the test matrix versions to moderize coverage
by Daniel P. Berrangé 25 Jul '18

25 Jul '18

Add latest go 1.10 to matrix and (arbitrarily) trim out 1.6 and 1.8 Add libvirt 4.5.0 and (arbitrarily) trim out 1.2.10 Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- .travis.yml | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/.travis.yml b/.travis.yml index 1bdb48f..7cd7587 100644 --- a/.travis.yml +++ b/.travis.yml @@ -5,17 +5,16 @@ sudo: require go: - 1.5 - - 1.6 - 1.7 - - 1.8 - 1.9 + - 1.10 env: - LIBVIRT=1.2.0 EXT=gz - - LIBVIRT=1.2.10 EXT=gz - LIBVIRT=1.2.20 EXT=gz - LIBVIRT=2.5.0 EXT=xz - LIBVIRT=3.6.0 EXT=xz + - LIBVIRT=4.5.0 EXT=xz install: - sudo apt-get -qqy build-dep libvirt -- 2.17.1

2 3

[libvirt] [PATCH] util: Fix virStorageBackendIQNFound() to work on FreeBSD
by Andrea Bolognani 25 Jul '18

25 Jul '18

Despite being standardized in POSIX.1-2008, the 'm' sscanf() modifier is currently not available on FreeBSD. Reimplement parsing without sscanf() to work around the issue. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- src/util/viriscsi.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/src/util/viriscsi.c b/src/util/viriscsi.c index e2c80acaaa..96934df948 100644 --- a/src/util/viriscsi.c +++ b/src/util/viriscsi.c @@ -146,8 +146,10 @@ virStorageBackendIQNFound(const char *initiatoriqn, line = outbuf; while (line && *line) { + char *current = line; char *newline; - int num; + char *next; + int i; if (!(newline = strchr(line, '\n'))) break; @@ -156,15 +158,29 @@ virStorageBackendIQNFound(const char *initiatoriqn, VIR_FREE(iface); VIR_FREE(iqn); - num = sscanf(line, "%ms %*[^,],%*[^,],%*[^,],%*[^,],%ms", &iface, &iqn); - if (num != 2) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("malformed output of %s: %s"), - ISCSIADM, line); + /* Find the first space, copy everything up to that point into + * iface and move past it to continue processing */ + if (!(next = strchr(current, ' '))) + goto error; + + if (VIR_STRNDUP(iface, current, (next - current)) < 0) goto cleanup; + + current = next + 1; + + /* There are five comma separated fields after iface and we only + * care about the last one, so we need to skip four commas and + * copy whatever's left into iqn */ + for (i = 0; i < 4; i++) { + if (!(next = strchr(current, ','))) + goto error; + current = next + 1; } + if (VIR_STRDUP(iqn, current) < 0) + goto cleanup; + if (STREQ(iqn, initiatoriqn)) { VIR_STEAL_PTR(*ifacename, iface); @@ -186,6 +202,12 @@ virStorageBackendIQNFound(const char *initiatoriqn, VIR_FREE(outbuf); virCommandFree(cmd); return ret; + + error: + virReportError(VIR_ERR_INTERNAL_ERROR, + _("malformed output of %s: %s"), + ISCSIADM, line); + goto cleanup; } -- 2.17.1

3 3

[libvirt] [PATCH] esx storage: Fix typo lsilogic -> lsiLogic
by Marcos Paulo de Souza 25 Jul '18

25 Jul '18

Commit 77298458d027db4d3e082213355e2d792f65158d changed the esx storage adapter from busLogic to lsilogic, introducing a typo. Changing it back to lsiLogic (with capital L) solves the issue. With this change, libvirt can now create volumes in ESX again. Thanks to Jaroslav Suchanek who figured out what was the issue in the first place. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1571759 Signed-off-by: Marcos Paulo de Souza <marcos.souza.org(a)gmail.com> --- src/esx/esx_storage_backend_vmfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/esx/esx_storage_backend_vmfs.c b/src/esx/esx_storage_backend_vmfs.c index 630a6aa8c9..bb2de4b69f 100644 --- a/src/esx/esx_storage_backend_vmfs.c +++ b/src/esx/esx_storage_backend_vmfs.c @@ -967,9 +967,9 @@ esxStorageVolCreateXML(virStoragePoolPtr pool, /* * FIXME: The adapter type is a required parameter, but there is no * way to let the user specify it in the volume XML config. Therefore, - * default to 'lsilogic' here. + * default to 'lsiLogic' here. */ - virtualDiskSpec->adapterType = (char *)"lsilogic"; + virtualDiskSpec->adapterType = (char *)"lsiLogic"; virtualDiskSpec->capacityKb->value = VIR_DIV_UP(def->target.capacity, 1024); /* Scale from byte to kilobyte */ -- 2.17.0

2 1

[libvirt] [PATCH] IGNORE. Testing patchew.org syntax-check reporting
by Daniel P. Berrangé 25 Jul '18

25 Jul '18

Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- src/libvirt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/src/libvirt.c b/src/libvirt.c index aeb8804714..ed4ec062e7 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -21,8 +21,6 @@ * Daniel Veillard <veillard(a)redhat.com> */ -#include <config.h> - #include <stdio.h> #include <stdlib.h> #include <string.h> -- 2.17.1

2 1

[libvirt] [dbus PATCH] tests: Fix sha-bang for test_interface.py
by Andrea Bolognani 25 Jul '18

25 Jul '18

We need to call python3 through /usr/bin/env so that the script will work on platforms, such as FreeBSD, where the interpreter is installed under a different path. Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- Pushed under the build-breaker rule. tests/test_interface.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/test_interface.py b/tests/test_interface.py index 9503eef..3b8b344 100755 --- a/tests/test_interface.py +++ b/tests/test_interface.py @@ -1,4 +1,4 @@ -#!/usr/bin/python3 +#!/usr/bin/env python3 import dbus import libvirttest -- 2.17.1

1 0

[libvirt] [PATCH] news: Add --alias to virsh attach-disk and attach-interface
by Han Han 25 Jul '18

25 Jul '18

Signed-off-by: Han Han <hhan(a)redhat.com> --- docs/news.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/docs/news.xml b/docs/news.xml index 20c2ff7a6f..1e632eb378 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -67,6 +67,15 @@ only rendering devices within the guest. </description> </change> + <change> + <summary> + virsh: Add --alias to attach-disk and attach-interface command. + </summary> + <description> + Add option --alias to set customized device alias name when + attach-disk or attach-interface. + </description> + </change> </section> <section title="Bug fixes"> </section> -- 2.18.0

2 1