- Devel - libvirt List Archives

[libvirt] [PATCH 0/2] Allow usage of unpriv_sgio for SCSI generic hostdev
by John Ferlan 24 Aug '18

24 Aug '18

In what is perhaps a couple lifetimes ago at this point, patches were posted and "mostly" all eventually accepted upstream to support unpriv_sgio on SCSI generic hostdev devices. Since the needed parts of the functionality from the kernel perspective were not yet present upstream, a couple of the patches were not accepted. See: https://www.redhat.com/archives/libvir-list/2015-July/msg00204.html and in particular patches 9 and 10. Since that time it seems things have changed and this essentially reposts those two patches with some minor adjustments in logic in order to "restore" the support. There are lots of interesting tidbits in unreadable by the general public bz's, so I won't include links here. John Ferlan (2): qemu: Add ability to set sgio values for hostdev qemu: Add check for unpriv sgio for SCSI generic host device src/qemu/qemu_conf.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) -- 2.17.1

3 5

[libvirt] [PATCH v2] process: Ignore nwfilter binding instantiation issues during reconnect
by John Ferlan 24 Aug '18

24 Aug '18

https://bugzilla.redhat.com/show_bug.cgi?id=1607202 It's essentially stated in the nwfilterBindingDelete that we will allow the admin to shoot themselves in the foot by deleting the nwfilter binding which then allows them to undefine the nwfilter that is in use for the running guest... However, by allowing this we cause a problem for libvirtd restart reconnect processing which would then try to recreate the missing binding attempting to use the deleted filter resulting in an error and thus shutting the guest down. So rather than keep adding virDomainConfNWFilterInstantiate flags to "ignore" specific error conditions and since (so far) this is the only path that cared about checking if the filter already exists and ignoring, let's just ignore all errors and make the qemuProcessFiltersInstantiate be a void which will attempt to check all networks for bindings and reload all filters that exist. Using the VIR_INFO in order to at least "log" the avoided issue. This also means virDomainConfNWFilterInstantiate no longer needs to handle/check the ignoreExists possbility. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- v1: https://www.redhat.com/archives/libvir-list/2018-August/msg01407.html Changes - removed the ignoreExists and just change the logic for reconnect processing to essentially ignore all errors. If it's felt the VIR_INFO would be too chatty (especially since it'll be generated for every already defined filter binding), I can remove it. Another option would be to keep the ignoreExists logic and only generate that VIR_INFO for "other" messages. In that case, I'd probably want to change it to a VIR_WARN. Still figured I'd post the remove it all option first for consideration with this caveat so that "option" can be considered as well. src/conf/domain_nwfilter.c | 15 +++------------ src/conf/domain_nwfilter.h | 3 +-- src/lxc/lxc_process.c | 2 +- src/qemu/qemu_hotplug.c | 4 ++-- src/qemu/qemu_interface.c | 4 ++-- src/qemu/qemu_process.c | 23 +++++++++++++++-------- src/uml/uml_conf.c | 2 +- 7 files changed, 25 insertions(+), 28 deletions(-) diff --git a/src/conf/domain_nwfilter.c b/src/conf/domain_nwfilter.c index f39c8a1f9b..51c9063ca7 100644 --- a/src/conf/domain_nwfilter.c +++ b/src/conf/domain_nwfilter.c @@ -84,8 +84,7 @@ virNWFilterBindingDefForNet(const char *vmname, int virDomainConfNWFilterInstantiate(const char *vmname, const unsigned char *vmuuid, - virDomainNetDefPtr net, - bool ignoreExists) + virDomainNetDefPtr net) { virConnectPtr conn = virGetConnectNWFilter(); virNWFilterBindingDefPtr def = NULL; @@ -93,20 +92,12 @@ virDomainConfNWFilterInstantiate(const char *vmname, char *xml = NULL; int ret = -1; - VIR_DEBUG("vmname=%s portdev=%s filter=%s ignoreExists=%d", - vmname, NULLSTR(net->ifname), NULLSTR(net->filter), ignoreExists); + VIR_DEBUG("vmname=%s portdev=%s filter=%s", + vmname, NULLSTR(net->ifname), NULLSTR(net->filter)); if (!conn) goto cleanup; - if (ignoreExists) { - binding = virNWFilterBindingLookupByPortDev(conn, net->ifname); - if (binding) { - ret = 0; - goto cleanup; - } - } - if (!(def = virNWFilterBindingDefForNet(vmname, vmuuid, net))) goto cleanup; diff --git a/src/conf/domain_nwfilter.h b/src/conf/domain_nwfilter.h index 6bda228fc8..d2ebeff853 100644 --- a/src/conf/domain_nwfilter.h +++ b/src/conf/domain_nwfilter.h @@ -25,8 +25,7 @@ int virDomainConfNWFilterInstantiate(const char *vmname, const unsigned char *vmuuid, - virDomainNetDefPtr net, - bool ignoreExists); + virDomainNetDefPtr net); void virDomainConfNWFilterTeardown(virDomainNetDefPtr net); void virDomainConfVMNWFilterTeardown(virDomainObjPtr vm); diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c index 33c806630b..86f7463e53 100644 --- a/src/lxc/lxc_process.c +++ b/src/lxc/lxc_process.c @@ -303,7 +303,7 @@ virLXCProcessSetupInterfaceTap(virDomainDefPtr vm, } if (net->filter && - virDomainConfNWFilterInstantiate(vm->name, vm->uuid, net, false) < 0) + virDomainConfNWFilterInstantiate(vm->name, vm->uuid, net) < 0) goto cleanup; ret = containerVeth; diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 0b84a503bb..38c74bd9b1 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -3435,7 +3435,7 @@ qemuDomainChangeNetFilter(virDomainObjPtr vm, if (newdev->filter && virDomainConfNWFilterInstantiate(vm->def->name, - vm->def->uuid, newdev, false) < 0) { + vm->def->uuid, newdev) < 0) { virErrorPtr errobj; virReportError(VIR_ERR_OPERATION_FAILED, @@ -3444,7 +3444,7 @@ qemuDomainChangeNetFilter(virDomainObjPtr vm, olddev->ifname); virErrorPreserveLast(&errobj); ignore_value(virDomainConfNWFilterInstantiate(vm->def->name, - vm->def->uuid, olddev, false)); + vm->def->uuid, olddev)); virErrorRestore(&errobj); return -1; } diff --git a/src/qemu/qemu_interface.c b/src/qemu/qemu_interface.c index a3f13093f5..5d54a85c53 100644 --- a/src/qemu/qemu_interface.c +++ b/src/qemu/qemu_interface.c @@ -467,7 +467,7 @@ qemuInterfaceEthernetConnect(virDomainDefPtr def, goto cleanup; if (net->filter && - virDomainConfNWFilterInstantiate(def->name, def->uuid, net, false) < 0) { + virDomainConfNWFilterInstantiate(def->name, def->uuid, net) < 0) { goto cleanup; } @@ -586,7 +586,7 @@ qemuInterfaceBridgeConnect(virDomainDefPtr def, goto cleanup; if (net->filter && - virDomainConfNWFilterInstantiate(def->name, def->uuid, net, false) < 0) { + virDomainConfNWFilterInstantiate(def->name, def->uuid, net) < 0) { goto cleanup; } diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index ab749389ee..48d9bab128 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3160,22 +3160,30 @@ qemuProcessNotifyNets(virDomainDefPtr def) } } -static int -qemuProcessFiltersInstantiate(virDomainDefPtr def, bool ignoreExists) + +/* Attempt to instantiate the filters. Ignore failures because it's + * (primarily) possible that a filter binding either already exists + * or someone deleted it and the associated filter while the guest + * was running and we don't want that action to cause failure to + * keep the guest running during the reconnection processing. */ +static void +qemuProcessFiltersInstantiate(virDomainDefPtr def) { size_t i; for (i = 0; i < def->nnets; i++) { virDomainNetDefPtr net = def->nets[i]; if ((net->filter) && (net->ifname)) { - if (virDomainConfNWFilterInstantiate(def->name, def->uuid, net, ignoreExists) < 0) - return 1; + if (virDomainConfNWFilterInstantiate(def->name, def->uuid, net) < 0) { + VIR_INFO("filter '%s' instantiation for '%s' failed '%s'", + net->filter, net->ifname, virGetLastErrorMessage()); + virResetLastError(); + } } } - - return 0; } + static int qemuProcessUpdateState(virQEMUDriverPtr driver, virDomainObjPtr vm) { @@ -7892,8 +7900,7 @@ qemuProcessReconnect(void *opaque) qemuProcessNotifyNets(obj->def); - if (qemuProcessFiltersInstantiate(obj->def, true)) - goto error; + qemuProcessFiltersInstantiate(obj->def); if (qemuProcessRefreshDisks(driver, obj, QEMU_ASYNC_JOB_NONE) < 0) goto error; diff --git a/src/uml/uml_conf.c b/src/uml/uml_conf.c index f116e619ef..9c548f0e80 100644 --- a/src/uml/uml_conf.c +++ b/src/uml/uml_conf.c @@ -137,7 +137,7 @@ umlConnectTapDevice(virDomainDefPtr vm, } if (net->filter) { - if (virDomainConfNWFilterInstantiate(vm->name, vm->uuid, net, false) < 0) { + if (virDomainConfNWFilterInstantiate(vm->name, vm->uuid, net) < 0) { if (template_ifname) VIR_FREE(net->ifname); goto error; -- 2.17.1

2 4

[libvirt] [PATCH v3] qemu: qemuDomainChangeNet: validity checks should be done before XML autocompletion
by Katerina Koukiou 24 Aug '18

24 Aug '18

This patch ensures that changes in attributes of interfaces will be emit errors accept if they are missing from the XML. Previously we were falsely reporting successful updates, because some changed attributes got overwritten before the validity checks. https://bugzilla.redhat.com/show_bug.cgi?id=1599513 Signed-off-by: Katerina Koukiou <kkoukiou(a)redhat.com> --- Changes from v2: * Added check for type element in info struct. * Moved the addr checks at start the the section with info checks. src/qemu/qemu_hotplug.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 0b84a503bb..f9805627b7 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -3598,16 +3598,22 @@ qemuDomainChangeNet(virQEMUDriverPtr driver, goto cleanup; } - /* info: if newdev->info is empty, fill it in from olddev, - * otherwise verify that it matches - nothing is allowed to - * change. (There is no helper function to do this, so - * individually check the few feidls of virDomainDeviceInfo that - * are relevant in this case). + /* info: Nothing is allowed to change. First fill the missing newdev->info + * from olddev and then check for changes. */ + + /* if addr type is missing overwrite if from olddev */ + if (newdev->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) + newdev->info.type = olddev->info.type; + if (olddev->info.type != newdev->info.type) { + virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", + _("cannot modify network device type")); + } + + /* if pci addr is missing or is invalid we overwrite it from olddev */ if (!virDomainDeviceAddressIsValid(&newdev->info, - VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) && - virDomainDeviceInfoCopy(&newdev->info, &olddev->info) < 0) { - goto cleanup; + VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)) { + newdev->info.addr.pci = olddev->info.addr.pci; } if (!virPCIDeviceAddressEqual(&olddev->info.addr.pci, &newdev->info.addr.pci)) { @@ -3622,21 +3628,33 @@ qemuDomainChangeNet(virQEMUDriverPtr driver, /* device alias is checked already in virDomainDefCompatibleDevice */ + if (newdev->info.rombar == VIR_TRISTATE_BOOL_ABSENT) + newdev->info.rombar = olddev->info.rombar; if (olddev->info.rombar != newdev->info.rombar) { virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", _("cannot modify network device rom bar setting")); goto cleanup; } + + if (!newdev->info.romfile && + VIR_STRDUP(newdev->info.romfile, olddev->info.romfile) < 0) + goto cleanup; if (STRNEQ_NULLABLE(olddev->info.romfile, newdev->info.romfile)) { virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", _("cannot modify network rom file")); goto cleanup; } + + if (newdev->info.bootIndex == 0) + newdev->info.bootIndex = olddev->info.bootIndex; if (olddev->info.bootIndex != newdev->info.bootIndex) { virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", _("cannot modify network device boot index setting")); goto cleanup; } + + if (newdev->info.romenabled == VIR_TRISTATE_BOOL_ABSENT) + newdev->info.romenabled = olddev->info.romenabled; if (olddev->info.romenabled != newdev->info.romenabled) { virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", _("cannot modify network device rom enabled setting")); -- 2.17.1

2 1

[libvirt] [jenkins-ci PATCH v3 00/12] lcitool: Add 'build' action
by Andrea Bolognani 24 Aug '18

24 Aug '18

Changes from [v2]: * rebase on top of master (dbc2de85f775) and integrate recent changes to build rules on the Jenkins side; * drop a commit that had already been merged in the meantime. Changes from [v1]: * rebase on top of master (985ab833be9b) and integrate recent changes to build rules on the Jenkins side; * build on more targets. [v2] https://www.redhat.com/archives/libvir-list/2018-August/msg01109.html [v1] https://www.redhat.com/archives/libvir-list/2018-August/msg00393.html Andrea Bolognani (12): jobs: Rename git-url -> git_url jobs: Remove archive_format from defaults jobs: Move some parameters from jobs to defaults jobs: Declare empty values consistently guests: Add build jobs guests: Add build projects guests: Add build playbook lcitool: Make playbook execution generic lcitool: Add 'build' action lcitool: Support building arbitrary branches guests: Support building on more targets lcitool: Document build action guests/README.markdown | 19 +++ guests/lcitool | 109 ++++++++++-------- .../build/jobs/autotools-build-job.yml | 15 +++ .../build/jobs/autotools-check-job.yml | 16 +++ .../build/jobs/autotools-rpm-job.yml | 15 +++ .../build/jobs/autotools-syntax-check-job.yml | 12 ++ guests/playbooks/build/jobs/defaults.yml | 42 +++++++ .../build/jobs/generic-build-job.yml | 11 ++ .../build/jobs/generic-check-job.yml | 11 ++ .../playbooks/build/jobs/generic-rpm-job.yml | 11 ++ .../build/jobs/generic-syntax-check-job.yml | 11 ++ guests/playbooks/build/jobs/go-build-job.yml | 11 ++ guests/playbooks/build/jobs/go-check-job.yml | 11 ++ .../build/jobs/perl-modulebuild-build-job.yml | 13 +++ .../build/jobs/perl-modulebuild-check-job.yml | 11 ++ .../build/jobs/perl-modulebuild-rpm-job.yml | 14 +++ guests/playbooks/build/jobs/prepare.yml | 19 +++ .../build/jobs/python-distutils-build-job.yml | 13 +++ .../build/jobs/python-distutils-check-job.yml | 11 ++ .../build/jobs/python-distutils-rpm-job.yml | 14 +++ guests/playbooks/build/main.yml | 16 +++ guests/playbooks/build/projects/libosinfo.yml | 36 ++++++ .../playbooks/build/projects/libvirt-cim.yml | 10 ++ .../playbooks/build/projects/libvirt-dbus.yml | 52 +++++++++ .../playbooks/build/projects/libvirt-glib.yml | 38 ++++++ .../build/projects/libvirt-go-xml.yml | 13 +++ .../playbooks/build/projects/libvirt-go.yml | 13 +++ .../playbooks/build/projects/libvirt-perl.yml | 19 +++ .../build/projects/libvirt-python.yml | 13 +++ .../build/projects/libvirt-sandbox.yml | 30 +++++ .../playbooks/build/projects/libvirt-tck.yml | 27 +++++ guests/playbooks/build/projects/libvirt.yml | 57 +++++++++ .../build/projects/osinfo-db-tools.yml | 36 ++++++ guests/playbooks/build/projects/osinfo-db.yml | 23 ++++ .../playbooks/build/projects/virt-manager.yml | 42 +++++++ .../playbooks/build/projects/virt-viewer.yml | 40 +++++++ jobs/autotools.yaml | 3 +- jobs/defaults.yaml | 8 +- jobs/generic.yaml | 3 +- jobs/go.yaml | 3 +- jobs/perl-modulebuild.yaml | 3 +- jobs/python-distutils.yaml | 3 +- projects/libosinfo.yaml | 3 +- projects/libvirt-cim.yaml | 3 +- projects/libvirt-dbus.yaml | 8 +- projects/libvirt-glib.yaml | 3 +- projects/libvirt-go-xml.yaml | 3 +- projects/libvirt-go.yaml | 3 +- projects/libvirt-perl.yaml | 3 +- projects/libvirt-python.yaml | 3 +- projects/libvirt-sandbox.yaml | 3 +- projects/libvirt-tck.yaml | 3 +- projects/libvirt.yaml | 2 +- projects/osinfo-db-tools.yaml | 3 +- projects/osinfo-db.yaml | 2 +- projects/virt-manager.yaml | 7 +- projects/virt-viewer.yaml | 3 +- 57 files changed, 852 insertions(+), 77 deletions(-) create mode 100644 guests/playbooks/build/jobs/autotools-build-job.yml create mode 100644 guests/playbooks/build/jobs/autotools-check-job.yml create mode 100644 guests/playbooks/build/jobs/autotools-rpm-job.yml create mode 100644 guests/playbooks/build/jobs/autotools-syntax-check-job.yml create mode 100644 guests/playbooks/build/jobs/defaults.yml create mode 100644 guests/playbooks/build/jobs/generic-build-job.yml create mode 100644 guests/playbooks/build/jobs/generic-check-job.yml create mode 100644 guests/playbooks/build/jobs/generic-rpm-job.yml create mode 100644 guests/playbooks/build/jobs/generic-syntax-check-job.yml create mode 100644 guests/playbooks/build/jobs/go-build-job.yml create mode 100644 guests/playbooks/build/jobs/go-check-job.yml create mode 100644 guests/playbooks/build/jobs/perl-modulebuild-build-job.yml create mode 100644 guests/playbooks/build/jobs/perl-modulebuild-check-job.yml create mode 100644 guests/playbooks/build/jobs/perl-modulebuild-rpm-job.yml create mode 100644 guests/playbooks/build/jobs/prepare.yml create mode 100644 guests/playbooks/build/jobs/python-distutils-build-job.yml create mode 100644 guests/playbooks/build/jobs/python-distutils-check-job.yml create mode 100644 guests/playbooks/build/jobs/python-distutils-rpm-job.yml create mode 100644 guests/playbooks/build/main.yml create mode 100644 guests/playbooks/build/projects/libosinfo.yml create mode 100644 guests/playbooks/build/projects/libvirt-cim.yml create mode 100644 guests/playbooks/build/projects/libvirt-dbus.yml create mode 100644 guests/playbooks/build/projects/libvirt-glib.yml create mode 100644 guests/playbooks/build/projects/libvirt-go-xml.yml create mode 100644 guests/playbooks/build/projects/libvirt-go.yml create mode 100644 guests/playbooks/build/projects/libvirt-perl.yml create mode 100644 guests/playbooks/build/projects/libvirt-python.yml create mode 100644 guests/playbooks/build/projects/libvirt-sandbox.yml create mode 100644 guests/playbooks/build/projects/libvirt-tck.yml create mode 100644 guests/playbooks/build/projects/libvirt.yml create mode 100644 guests/playbooks/build/projects/osinfo-db-tools.yml create mode 100644 guests/playbooks/build/projects/osinfo-db.yml create mode 100644 guests/playbooks/build/projects/virt-manager.yml create mode 100644 guests/playbooks/build/projects/virt-viewer.yml -- 2.17.1

2 32

Re: [libvirt] [PATCH v3 8/9] tests: Add RISC-V architectures
by Andrea Bolognani 24 Aug '18

24 Aug '18

On Wed, 2018-08-22 at 11:15 +0200, Lubomir Rintel wrote: > Signed-off-by: Lubomir Rintel <lkundrak(a)v3.sk> > --- > tests/capabilityschemadata/caps-qemu-kvm.xml | 36 + > .../caps_3.0.0.riscv32.replies | 14819 ++++++++++++++++ > .../caps_3.0.0.riscv32.xml | 118 + > .../caps_3.0.0.riscv64.replies | 14819 ++++++++++++++++ > .../caps_3.0.0.riscv64.xml | 118 + > tests/qemucapabilitiestest.c | 2 + > tests/qemuxml2argvdata/riscv64-virt.args | 30 + > tests/qemuxml2argvdata/riscv64-virt.xml | 32 + > tests/qemuxml2argvtest.c | 3 + > .../riscv64-virt.xml | 42 + > tests/qemuxml2xmloutdata/riscv64-virt.xml | 36 + > tests/qemuxml2xmltest.c | 2 + > tests/testutilsqemu.c | 72 + > tests/vircapstest.c | 6 + > 14 files changed, 30135 insertions(+) > create mode 100644 tests/qemucapabilitiesdata/caps_3.0.0.riscv32.replies > create mode 100644 tests/qemucapabilitiesdata/caps_3.0.0.riscv32.xml > create mode 100644 tests/qemucapabilitiesdata/caps_3.0.0.riscv64.replies > create mode 100644 tests/qemucapabilitiesdata/caps_3.0.0.riscv64.xml > create mode 100644 tests/qemuxml2argvdata/riscv64-virt.args > create mode 100644 tests/qemuxml2argvdata/riscv64-virt.xml > create mode 100644 tests/qemuxml2startupxmloutdata/riscv64-virt.xml > create mode 100644 tests/qemuxml2xmloutdata/riscv64-virt.xml I think I didn't explain myself clearly enough while reviewing v2: I expected patches 07-09 and 11 to be squashed together, but patch 10 to remain standalone. No big deal, I'll take care of splitting it up again myself. [...] > +++ b/tests/qemuxml2argvdata/riscv64-virt.xml > @@ -0,0 +1,32 @@ > +<domain type='qemu'> > + <name>riscv64</name> > + <uuid>fd65fc03-8838-4c4d-9d8d-395802488790</uuid> > + <memory unit='KiB'>2097152</memory> > + <currentMemory unit='KiB'>2097152</currentMemory> > + <vcpu placement='static'>1</vcpu> > + <os> > + <type arch='riscv64' machine='virt'>hvm</type> > + <kernel>/var/lib/libvirt/images/bbl</kernel> > + <cmdline>console=ttyS0 ro root=/dev/vda</cmdline> > + <boot dev='hd'/> > + </os> > + <clock offset='utc'/> > + <on_poweroff>destroy</on_poweroff> > + <on_reboot>restart</on_reboot> > + <on_crash>destroy</on_crash> > + <devices> > + <emulator>/usr/bin/qemu-system-riscv64</emulator> > + <disk type='file' device='disk'> > + <driver name='qemu' type='raw'/> > + <source file='/var/lib/libvirt/images/stage4-disk.img'/> > + <target dev='vda' bus='virtio'/> > + <address type='virtio-mmio'/> > + </disk> > + <serial type='pty'> > + <target port='0'/> > + </serial> > + <console type='pty'> > + <target type='serial' port='0'/> > + </console> > + </devices> > +</domain> You didn't minimize the input file like I requested during review :( Oh well, I'll take care of it. Reviewed-by: Andrea Bolognani <abologna(a)redhat.com> [...] > +static int testQemuAddRISCV32Guest(virCapsPtr caps) > +{ > + static const char *names[] = { "spike_v1.10", > + "spike_v1.9.1", > + "sifive_e", > + "virt", > + "sifive_u" }; > + static const int nmachines = ARRAY_CARDINALITY(names); > + virCapsGuestMachinePtr *machines = NULL; > + virCapsGuestPtr guest; > + > + machines = virCapabilitiesAllocMachines(names, nmachines); > + if (!machines) > + goto error; > + > + guest = virCapabilitiesAddGuest(caps, VIR_DOMAIN_OSTYPE_HVM, VIR_ARCH_RISCV32, > + QEMUBinList[TEST_UTILS_QEMU_BIN_RISCV32], > + NULL, nmachines, machines); > + if (!guest) > + goto error; > + > + if (!virCapabilitiesAddGuestDomain(guest, VIR_DOMAIN_VIRT_QEMU, NULL, NULL, 0, NULL)) > + goto error; > + > + return 0; > + > + error: > + virCapabilitiesFreeMachines(machines, nmachines); > + return -1; > +} > + > +static int testQemuAddRISCV64Guest(virCapsPtr caps) > +{ > + static const char *names[] = { "spike_v1.10", > + "spike_v1.9.1", > + "sifive_e", > + "virt", > + "sifive_u" }; > + static const int nmachines = ARRAY_CARDINALITY(names); > + virCapsGuestMachinePtr *machines = NULL; > + virCapsGuestPtr guest; > + > + machines = virCapabilitiesAllocMachines(names, nmachines); > + if (!machines) > + goto error; > + > + guest = virCapabilitiesAddGuest(caps, VIR_DOMAIN_OSTYPE_HVM, VIR_ARCH_RISCV64, > + QEMUBinList[TEST_UTILS_QEMU_BIN_RISCV64], > + NULL, nmachines, machines); > + if (!guest) > + goto error; > + > + if (!virCapabilitiesAddGuestDomain(guest, VIR_DOMAIN_VIRT_QEMU, NULL, NULL, 0, NULL)) > + goto error; > + > + return 0; > + > + error: > + virCapabilitiesFreeMachines(machines, nmachines); > + return -1; > +} > + > static int testQemuAddS390Guest(virCapsPtr caps) > { > static const char *s390_machines[] = { "s390-virtio", > @@ -440,6 +506,12 @@ virCapsPtr testQemuCapsInit(void) > if (testQemuAddPPCGuest(caps)) > goto cleanup; > > + if (testQemuAddRISCV32Guest(caps) < 0) > + goto cleanup; > + > + if (testQemuAddRISCV64Guest(caps) < 0) > + goto cleanup; > + > if (testQemuAddS390Guest(caps)) > goto cleanup; > And of course I didn't clean up the surrounding code even though I said I would... This is a good reminder I guess :) -- Andrea Bolognani / Red Hat / Virtualization

1 1

[libvirt] [PATCH 0/8] qemu: monitor: Clean up error handling for block job APIs
by Peter Krempa 24 Aug '18

24 Aug '18

Remove handling of errors which QEMU no longer reports and rename fields so that it conforms with the new semantics. Peter Krempa (8): qemu: monitor: Remove error classes not conforming to QAPI schema qemu: monitor: Use qemuMonitorJSONCheckError in qemuMonitorJSONBlockJobError qemu: monitor: Remove temporary variables qemu: monitor: Use qemuMonitorJSONCheckError in qemuMonitorJSONBlockStream qemu: monitor: Move qemuMonitorJSONDrivePivot together with block-job APIs qemu: monitor: Use qemuMonitorJSONBlockJobError in qemuMonitorJSONDrivePivot qemu: monitor: Rename 'device' argument for block job control APIs qemu: monitor: Separate probing for active block commit src/qemu/qemu_monitor.c | 20 +++--- src/qemu/qemu_monitor.h | 6 +- src/qemu/qemu_monitor_json.c | 155 +++++++++++++++++++++---------------------- src/qemu/qemu_monitor_json.h | 9 ++- 4 files changed, 94 insertions(+), 96 deletions(-) -- 2.16.2

2 19

[libvirt] [PATCH 0/2] Add nodesevinfo in virsh
by Han Han 24 Aug '18

24 Aug '18

Add virsh nodesevinfo to get AMD SEV features via virNodeGetSEVInfo. Han Han (2): virsh: Implement virNodeGetSEVInfo in virsh news: Add nodesevinfo command in virsh docs/news.xml | 9 +++++++ tools/virsh-host.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++ tools/virsh.pod | 5 ++++ 3 files changed, 80 insertions(+) -- 2.18.0

2 3

[libvirt] [PATCH] storage: Add --shrink to qemu-img command when shrinking vol
by John Ferlan 24 Aug '18

24 Aug '18

https://bugzilla.redhat.com/show_bug.cgi?id=1613746 When shrinking the capacity of a qcow2 or luks volume using the qemu-img program, the --shrink qualifier must be added. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- src/storage/storage_util.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/storage/storage_util.c b/src/storage/storage_util.c index 42a9b6abf0..c936120bf0 100644 --- a/src/storage/storage_util.c +++ b/src/storage/storage_util.c @@ -2294,12 +2294,12 @@ storageBackendResizeQemuImg(virStoragePoolObjPtr pool, * a multiple of 512 */ capacity = VIR_ROUND_UP(capacity, 512); - cmd = virCommandNew(img_tool); + cmd = virCommandNewArgList(img_tool, "resize", NULL); + if (capacity < vol->target.capacity) + virCommandAddArg(cmd, "--shrink"); if (!vol->target.encryption) { - virCommandAddArgList(cmd, "resize", vol->target.path, NULL); + virCommandAddArg(cmd, vol->target.path); } else { - virCommandAddArg(cmd, "resize"); - if (storageBackendCreateQemuImgSecretObject(cmd, secretPath, secretAlias) < 0) goto cleanup; -- 2.17.1

2 1

[libvirt] [PATCH] nwfilter: Handle opening for session
by John Ferlan 24 Aug '18

24 Aug '18

https://bugzilla.redhat.com/show_bug.cgi?id=1608275 Commit id 2870419eb (in part) added virGetConnectNWFilter to allow opening drivers (interface, network, nwfilter, nodedev, secret, and storage) based on context and commit id f14c37ce4c started using the API; however, the nwfilterConnectOpen did not handle session mode resulting in the following message being logged when virDomainConfVMNWFilterTeardown was called during the domain shutdown processing: error : nwfilterConnectOpen:383 : internal error: unexpected nwfilter URI path '/session', try nwfilter:///system So similar to the other drivers add code in to check for /session when not privileged. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- src/nwfilter/nwfilter_driver.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/src/nwfilter/nwfilter_driver.c b/src/nwfilter/nwfilter_driver.c index ac3a964388..6c25293fd9 100644 --- a/src/nwfilter/nwfilter_driver.c +++ b/src/nwfilter/nwfilter_driver.c @@ -377,11 +377,20 @@ nwfilterConnectOpen(virConnectPtr conn, return VIR_DRV_OPEN_ERROR; } - if (STRNEQ(conn->uri->path, "/system")) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("unexpected nwfilter URI path '%s', try nwfilter:///system"), - conn->uri->path); - return VIR_DRV_OPEN_ERROR; + if (driver->privileged) { + if (STRNEQ(conn->uri->path, "/system")) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("unexpected nwfilter URI path '%s', try nwfilter:///system"), + conn->uri->path); + return VIR_DRV_OPEN_ERROR; + } + } else { + if (STRNEQ(conn->uri->path, "/session")) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("unexpected nwfilter URI path '%s', try nwfilter:///session"), + conn->uri->path); + return VIR_DRV_OPEN_ERROR; + } } if (virConnectOpenEnsureACL(conn) < 0) -- 2.17.1

2 1

[libvirt] [PATCH] nwfilter: Add extra verbiage for binding create/delete
by John Ferlan 24 Aug '18

24 Aug '18

https://bugzilla.redhat.com/show_bug.cgi?id=1609454 Add some cautionary words related to the create and delete NWFilter Binding use cases and possible issues that may result to the virsh nwfilter-binding-{create|delete} descriptions and the virNWFilterBinding{CreateXML|Delete) API descriptions. Essentially summarizing commit 2d9318b6c without using the shoot yourself in the foot wording. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- Perhaps not the exact "answer" for the bz; however, using the bz as the excuse to say it was a bit confusing and let's try to clarify the wording a bit more. src/libvirt-nwfilter.c | 16 ++++++++++++++-- tools/virsh.pod | 14 ++++++++++++-- 2 files changed, 26 insertions(+), 4 deletions(-) diff --git a/src/libvirt-nwfilter.c b/src/libvirt-nwfilter.c index e572d46c18..3da85adc9e 100644 --- a/src/libvirt-nwfilter.c +++ b/src/libvirt-nwfilter.c @@ -678,7 +678,14 @@ virNWFilterBindingGetFilterName(virNWFilterBindingPtr binding) * @flags: currently unused, pass 0 * * Define a new network filter, based on an XML description - * similar to the one returned by virNWFilterGetXMLDesc() + * similar to the one returned by virNWFilterGetXMLDesc(). This + * API may be used to associate a filter with a currently running + * guest that does not have a filter defined for a specific network + * port. Since the bindings are generally automatically managed by + * the hypervisor, using this command to define a filter for a network + * port and then starting the guest afterwards may prevent the guest + * from starting if it attempts to use the network port and finds a + * filter already defined. * * virNWFilterFree should be used to free the resources after the * binding object is no longer needed. @@ -717,7 +724,12 @@ virNWFilterBindingCreateXML(virConnectPtr conn, const char *xml, unsigned int fl * @binding: a binding object * * Delete the binding object. This does not free the - * associated virNWFilterBindingPtr object. + * associated virNWFilterBindingPtr object. This API + * may be used to remove the network port binding filter + * currently in use for the guest while the guest is + * running without needing to restart the guest. Restoring + * the network port binding filter for the running guest + * would be accomplished by using virNWFilterBindingCreateXML. * * Returns 0 in case of success and -1 in case of failure. */ diff --git a/tools/virsh.pod b/tools/virsh.pod index 4e118851f8..86c041d575 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -4836,13 +4836,23 @@ of the network filters directly. =item B<nwfilter-binding-create> I<xmlfile> Associate a network port with a network filter. The network filter backend -will immediately attempt to instantiate the filter rules on the port. +will immediately attempt to instantiate the filter rules on the port. This +command may be used to associate a filter with a currently running guest +that does not have a filter defined for a specific network port. Since the +bindings are generally automatically managed by the hypervisor, using this +command to define a filter for a network port and then starting the guest +afterwards may prevent the guest from starting if it attempts to use the +network port and finds a filter already defined. =item B<nwfilter-binding-delete> I<port-name> Disassociate a network port from a network filter. The network filter backend will immediately tear down the filter rules that exist on the -port. +port. This command may be used to remove the network port binding for +a filter currently in use for the guest while the guest is running +without needing to restart the guest. Restoring the network port binding +filter for the running guest would be accomplished by using +I<nwfilter-binding-create>. =item B<nwfilter-binding-list> -- 2.17.1

2 1