- Devel - libvirt List Archives

[libvirt] [PATCH] storage_encryption: silence clang warning
by Eric Blake 11 May '10

11 May '10

For printf("%*s",foo,bar), clang complains if foo is not int: warning: field width should have type 'int', but argument has type 'unsigned int' [-Wformat] * src/conf/storage_encryption_conf.c (virStorageEncryptionSecretFormat, virStorageEncryptionFormat): Use correct type. --- src/conf/storage_encryption_conf.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-) diff --git a/src/conf/storage_encryption_conf.c b/src/conf/storage_encryption_conf.c index 7a64050..8f29492 100644 --- a/src/conf/storage_encryption_conf.c +++ b/src/conf/storage_encryption_conf.c @@ -1,7 +1,7 @@ /* * storage_encryption_conf.c: volume encryption information * - * Copyright (C) 2009 Red Hat, Inc. + * Copyright (C) 2009-2010 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -216,7 +216,7 @@ virStorageEncryptionParseNode(xmlDocPtr xml, xmlNodePtr root) static int virStorageEncryptionSecretFormat(virBufferPtr buf, virStorageEncryptionSecretPtr secret, - unsigned int indent) + int indent) { const char *type; char uuidstr[VIR_UUID_STRING_BUFLEN]; @@ -249,14 +249,15 @@ virStorageEncryptionFormat(virBufferPtr buf, return -1; } virBufferVSprintf(buf, "%*s<encryption format='%s'>\n", - indent, "", format); + (int) indent, "", format); for (i = 0; i < enc->nsecrets; i++) { - if (virStorageEncryptionSecretFormat(buf, enc->secrets[i], indent + 2) < 0) + if (virStorageEncryptionSecretFormat(buf, enc->secrets[i], + indent + 2) < 0) return -1; } - virBufferVSprintf(buf, "%*s</encryption>\n", indent, ""); + virBufferVSprintf(buf, "%*s</encryption>\n", (int) indent, ""); return 0; } -- 1.6.6.1

3 10

[libvirt] [PATCH] vepa: parsing for 802.1Qb{g|h} XML
by Stefan Berger 11 May '10

11 May '10

Below is David Alan's original patch with lots of changes. In particular, it now parses the following XML and stored the data internally. No sending of netlink messages has been implemented here. <interface type='direct'> <source dev='static' mode='vepa'/> <model type='virtio'/> <vsi managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f' /> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='static' mode='vepa'/> <model type='virtio'/> <vsi profileid='my_profile'/> </interface> I'd suggest to use this patch as a base for sending out netlink messages. Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> >From a945107f047c7cd71f9c1b74fd74c47d8cdc3670 Mon Sep 17 00:00:00 2001 From: David Allan <dallan(a)redhat.com> Date: Fri, 12 Mar 2010 13:25:04 -0500 Subject: [PATCH 1/1] POC of port profile id support * Modified schema per DanPB's feedback * Added test for modified schema --- docs/schemas/domain.rng | 57 +++++++++++++++++++ src/conf/domain_conf.c | 97 +++++++++++++++++++++++++++++++++ src/conf/domain_conf.h | 31 ++++++++++ src/qemu/qemu_conf.c | 11 --- src/qemu/qemu_conf.h | 2 src/qemu/qemu_driver.c | 14 +--- src/util/macvtap.c | 89 +++++++++++++++++++++++++----- src/util/macvtap.h | 7 +- tests/domainschemadata/portprofile.xml | 22 +++++++ 9 files changed, 292 insertions(+), 38 deletions(-) create mode 100644 tests/domainschemadata/portprofile.xml Index: libvirt-acl/docs/schemas/domain.rng =================================================================== --- libvirt-acl.orig/docs/schemas/domain.rng +++ libvirt-acl/docs/schemas/domain.rng @@ -817,6 +817,9 @@ </optional> <empty/> </element> + <optional> + <ref name="vsiProfile"/> + </optional> <ref name="interface-options"/> </interleave> </group> @@ -902,6 +905,33 @@ </optional> </interleave> </define> + <define name="vsiProfile"> + <choice> + <group> + <element name="vsi"> + <attribute name="managerid"> + <ref name="uint8range"/> + </attribute> + <attribute name="typeid"> + <ref name="uint24range"/> + </attribute> + <attribute name="typeidversion"> + <ref name="uint8range"/> + </attribute> + <attribute name="instanceid"> + <ref name="UUID"/> + </attribute> + </element> + </group> + <group> + <element name="vsi"> + <attribute name="profileid"> + <ref name="vsiProfileID"/> + </attribute> + </element> + </group> + </choice> + </define>  @@ -1769,4 +1799,31 @@ <param name="pattern">[a-zA-Z0-9_\.:]+</param> </data> </define> + <define name="uint8range"> + <choice> + <data type="string"> + <param name="pattern">0x[0-9a-fA-F]{1,2}</param> + </data> + <data type="int"> + <param name="minInclusive">0</param> + <param name="maxInclusive">255</param> + </data> + </choice> + </define> + <define name="uint24range"> + <choice> + <data type="string"> + <param name="pattern">0x[0-9a-fA-F]{1,6}</param> + </data> + <data type="int"> + <param name="minInclusive">0</param> + <param name="maxInclusive">16777215</param> + </data> + </choice> + </define> + <define name="vsiProfileID"> + <data type="string"> + <param name="maxLength">39</param> + </data> + </define> </grammar> Index: libvirt-acl/src/conf/domain_conf.c =================================================================== --- libvirt-acl.orig/src/conf/domain_conf.c +++ libvirt-acl/src/conf/domain_conf.c @@ -1831,7 +1831,13 @@ virDomainNetDefParseXML(virCapsPtr caps, char *internal = NULL; char *devaddr = NULL; char *mode = NULL; + char *vsiManagerID = NULL; + char *vsiTypeID = NULL; + char *vsiTypeIDVersion = NULL; + char *vsiInstanceID = NULL; + char *vsiProfileID = NULL; virNWFilterHashTablePtr filterparams = NULL; + virVSIProfileDefPtr vsi; if (VIR_ALLOC(def) < 0) { virReportOOMError(); @@ -1873,6 +1879,20 @@ virDomainNetDefParseXML(virCapsPtr caps, xmlStrEqual(cur->name, BAD_CAST "source")) { dev = virXMLPropString(cur, "dev"); mode = virXMLPropString(cur, "mode"); + } else if ((vsiManagerID == NULL) && + (vsiTypeID == NULL) && + (vsiTypeIDVersion == NULL) && + (vsiInstanceID == NULL) && + (vsiProfileID == NULL) && + (def->type == VIR_DOMAIN_NET_TYPE_DIRECT) && + xmlStrEqual(cur->name, BAD_CAST "vsi")) { + vsiManagerID = virXMLPropString(cur, "managerid"); + vsiTypeID = virXMLPropString(cur, "typeid"); + vsiTypeIDVersion = virXMLPropString(cur, "typeidversion"); + vsiInstanceID = virXMLPropString(cur, "instanceid"); +#ifdef IFLA_VF_PORT_PROFILE_MAX + vsiProfileID = virXMLPropString(cur, "profileid"); +#endif } else if ((network == NULL) && ((def->type == VIR_DOMAIN_NET_TYPE_SERVER) || (def->type == VIR_DOMAIN_NET_TYPE_CLIENT) || @@ -2049,6 +2069,51 @@ virDomainNetDefParseXML(virCapsPtr caps, } else def->data.direct.mode = VIR_DOMAIN_NETDEV_MACVTAP_MODE_VEPA; + vsi = &def->data.direct.vsiProfile; + +#ifdef IFLA_VF_PORT_PROFILE_MAX + if (vsiProfileID != NULL) { + if (virStrcpyStatic(vsi->u.vsi8021Qbh.profileID, + vsiProfileID) != NULL) { + vsi->vsiType = VIR_VSI_8021QBH; + break; + } + } +#endif + + while (vsiManagerID != NULL && vsiTypeID != NULL && + vsiTypeIDVersion != NULL && vsiInstanceID != NULL) { + unsigned int val; + + if ((virStrToLong_ui(vsiManagerID, NULL, 10, &val) && + virStrToLong_ui(vsiManagerID, NULL, 16, &val) ) || + val > 0xff) + break; + + vsi->u.vsi8021Qbg.managerID = (uint8_t)val; + + if ((virStrToLong_ui(vsiTypeID, NULL, 10, &val) && + virStrToLong_ui(vsiTypeID, NULL, 16, &val) ) || + val > 0xffffff) + break; + + vsi->u.vsi8021Qbg.typeID = (uint32_t)val; + + if ((virStrToLong_ui(vsiTypeIDVersion, NULL, 10, &val) && + virStrToLong_ui(vsiTypeIDVersion, NULL, 16, &val) ) || + val > 0xff) + break; + + vsi->u.vsi8021Qbg.typeIDVersion = (uint8_t)val; + + if (virUUIDParse(vsiInstanceID, + def->data.direct.vsiProfile.u.vsi8021Qbg.instanceID)) + break; + + vsi->vsiType = VIR_VSI_8021QBG; + break; + } + def->data.direct.linkdev = dev; dev = NULL; @@ -2114,6 +2179,11 @@ cleanup: VIR_FREE(internal); VIR_FREE(devaddr); VIR_FREE(mode); + VIR_FREE(vsiManagerID); + VIR_FREE(vsiTypeID); + VIR_FREE(vsiTypeIDVersion); + VIR_FREE(vsiInstanceID); + VIR_FREE(vsiProfileID); virNWFilterHashTableFree(filterparams); return def; @@ -5076,6 +5146,8 @@ virDomainNetDefFormat(virBufferPtr buf, { const char *type = virDomainNetTypeToString(def->type); char *attrs; + char uuidstr[VIR_UUID_STRING_BUFLEN]; + virVSIProfileDefPtr vsi; if (!type) { virDomainReportError(VIR_ERR_INTERNAL_ERROR, @@ -5141,6 +5213,31 @@ virDomainNetDefFormat(virBufferPtr buf, virBufferVSprintf(buf, " mode='%s'", virDomainNetdevMacvtapTypeToString(def->data.direct.mode)); virBufferAddLit(buf, "/>\n"); + vsi = &def->data.direct.vsiProfile; + switch (vsi->vsiType) { + case VIR_VSI_INVALID: + break; + + case VIR_VSI_8021QBG: + virUUIDFormat(def->data.direct.vsiProfile.u.vsi8021Qbg.instanceID, + uuidstr); + virBufferVSprintf(buf, + " <vsi managerid='%d' typeid='%d' " + "typeidversion='%d' instanceid='%s'/>\n", + vsi->u.vsi8021Qbg.managerID, + vsi->u.vsi8021Qbg.typeID, + vsi->u.vsi8021Qbg.typeIDVersion, + uuidstr); + break; + +#ifdef IFLA_VF_PORT_PROFILE_MAX + case VIR_VSI_8021QBH: + virBufferVSprintf(buf, + " <vsi profileid='%s'/>\n", + vsi->u.vsi8021Qbh.profileID); + break; +#endif + } break; case VIR_DOMAIN_NET_TYPE_USER: Index: libvirt-acl/src/conf/domain_conf.h =================================================================== --- libvirt-acl.orig/src/conf/domain_conf.h +++ libvirt-acl/src/conf/domain_conf.h @@ -259,6 +259,36 @@ enum virDomainNetdevMacvtapType { }; +#define IFLA_VF_PORT_PROFILE_MAX 40 +enum virVSIType { + VIR_VSI_INVALID, + VIR_VSI_8021QBG, +#ifdef IFLA_VF_PORT_PROFILE_MAX + VIR_VSI_8021QBH, +#endif +}; + +/* profile data for macvtap (VEPA) */ +typedef struct _virVSIProfileDef virVSIProfileDef; +typedef virVSIProfileDef *virVSIProfileDefPtr; +struct _virVSIProfileDef { + enum virVSIType vsiType; + union { + struct { + uint8_t managerID; + uint32_t typeID; // 24 bit valid + uint8_t typeIDVersion; + unsigned char instanceID[VIR_UUID_BUFLEN]; + } vsi8021Qbg; +#ifdef IFLA_VF_PORT_PROFILE_MAX + struct { + char profileID[IFLA_VF_PORT_PROFILE_MAX]; + } vsi8021Qbh; +#endif + } u; +}; + + /* Stores the virtual network interface configuration */ typedef struct _virDomainNetDef virDomainNetDef; typedef virDomainNetDef *virDomainNetDefPtr; @@ -290,6 +320,7 @@ struct _virDomainNetDef { struct { char *linkdev; int mode; + virVSIProfileDef vsiProfile; } direct; } data; char *ifname; Index: libvirt-acl/src/util/macvtap.c =================================================================== --- libvirt-acl.orig/src/util/macvtap.c +++ libvirt-acl/src/util/macvtap.c @@ -43,6 +43,7 @@ # include "util.h" # include "memory.h" +# include "logging.h" # include "macvtap.h" # include "interface.h" # include "conf/domain_conf.h" @@ -57,6 +58,13 @@ # define MACVTAP_NAME_PREFIX "macvtap" # define MACVTAP_NAME_PATTERN "macvtap%d" + +# define PREASSOCIATE 0x00 +# define PREASSOCIATE_WITH_RESOURCE_RESERVATION 0x01 +# define ASSOCIATE 0x02 +# define DEASSOCIATE 0x03 + + static int nlOpen(void) { int fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE); @@ -569,6 +577,45 @@ configMacvtapTap(int tapfd, int vnet_hdr } +static int +setPortProfileId(const char *linkdev ATTRIBUTE_UNUSED, + unsigned char *mac ATTRIBUTE_UNUSED, + int mode ATTRIBUTE_UNUSED, + const virVSIProfileDefPtr profile ATTRIBUTE_UNUSED) +{ + return 0; +} + +static int +associatePortProfileId(const char *linkdev, + unsigned char *mac, + int mode, + const virVSIProfileDefPtr profile) +{ + VIR_DEBUG("Associating port profile '%p' on link device '%s' mode % d ", + profile, linkdev, mode); + + return setPortProfileId(linkdev, + mac, + ASSOCIATE, + profile); +} + + +static int +disassociatePortProfileId(const char *linkdev, + unsigned char *mac, + const virVSIProfileDefPtr profile) +{ + VIR_DEBUG("Disassociating port profile id '%p' on link device '%s' ", + profile, linkdev); + + return setPortProfileId(linkdev, + mac, + DEASSOCIATE, + profile); +} + /** * openMacvtapTap: * Create an instance of a macvtap device and open its tap character @@ -589,9 +636,7 @@ configMacvtapTap(int tapfd, int vnet_hdr */ int openMacvtapTap(const char *tgifname, - const unsigned char *macaddress, - const char *linkdev, - int mode, + virDomainNetDefPtr net, char **res_ifname, int vnet_hdr) { @@ -599,7 +644,7 @@ openMacvtapTap(const char *tgifname, int c, rc; char ifname[IFNAMSIZ]; int retries, do_retry = 0; - uint32_t macvtapMode = macvtapModeFromInt(mode); + uint32_t macvtapMode = macvtapModeFromInt(net->data.direct.mode); const char *cr_ifname; int ifindex; @@ -616,7 +661,7 @@ openMacvtapTap(const char *tgifname, return -1; } cr_ifname = tgifname; - rc = link_add(type, macaddress, 6, tgifname, linkdev, + rc = link_add(type, net->mac, 6, tgifname, net->data.direct.linkdev, macvtapMode, &do_retry); if (rc) return -1; @@ -626,7 +671,8 @@ create_name: for (c = 0; c < 8192; c++) { snprintf(ifname, sizeof(ifname), MACVTAP_NAME_PATTERN, c); if (ifaceGetIndex(false, ifname, &ifindex) == ENODEV) { - rc = link_add(type, macaddress, 6, ifname, linkdev, + rc = link_add(type, net->mac, 6, ifname, + net->data.direct.linkdev, macvtapMode, &do_retry); if (rc == 0) break; @@ -639,6 +685,13 @@ create_name: cr_ifname = ifname; } + rc = associatePortProfileId(net->data.direct.linkdev, + net->mac, + net->data.direct.mode, + &net->data.direct.vsiProfile); + if (rc != 0) + goto link_del_exit; + rc = ifaceUp(cr_ifname); if (rc != 0) { virReportSystemError(errno, @@ -647,7 +700,7 @@ create_name: "MAC address"), cr_ifname); rc = -1; - goto link_del_exit; + goto disassociate_exit; } rc = openTap(cr_ifname, 10); @@ -656,14 +709,19 @@ create_name: if (configMacvtapTap(rc, vnet_hdr) < 0) { close(rc); rc = -1; - goto link_del_exit; + goto disassociate_exit; } *res_ifname = strdup(cr_ifname); } else - goto link_del_exit; + goto disassociate_exit; return rc; +disassociate_exit: + disassociatePortProfileId(net->data.direct.linkdev, + net->mac, + &net->data.direct.vsiProfile); + link_del_exit: link_del(cr_ifname); @@ -672,15 +730,20 @@ link_del_exit: /** - * delMacvtapByName: - * @ifname : The name of the macvtap interface + * delMacvtap: + * @net: pointer to virDomainNetDef object * * Delete an interface given its name. */ void -delMacvtap(const char *ifname) +delMacvtap(virDomainNetDefPtr net) { - link_del(ifname); + if (net->ifname) { + disassociatePortProfileId(net->data.direct.linkdev, + net->mac, + &net->data.direct.vsiProfile); + link_del(net->ifname); + } } #endif Index: libvirt-acl/src/util/macvtap.h =================================================================== --- libvirt-acl.orig/src/util/macvtap.h +++ libvirt-acl/src/util/macvtap.h @@ -27,15 +27,14 @@ # if defined(WITH_MACVTAP) # include "internal.h" +# include "conf/domain_conf.h" int openMacvtapTap(const char *ifname, - const unsigned char *macaddress, - const char *linkdev, - int mode, + virDomainNetDefPtr net, char **res_ifname, int vnet_hdr); -void delMacvtap(const char *ifname); +void delMacvtap(virDomainNetDefPtr net); # endif /* WITH_MACVTAP */ Index: libvirt-acl/tests/domainschemadata/portprofile.xml =================================================================== --- /dev/null +++ libvirt-acl/tests/domainschemadata/portprofile.xml @@ -0,0 +1,27 @@ +<domain type='lxc'> + <name>portprofile</name> + <uuid>00000000-0000-0000-0000-000000000000</uuid> + <memory>1048576</memory> + <os> + <type>exe</type> + <init>/sh</init> + </os> + <devices> + <interface type='direct'> + <source dev='eth0' mode='vepa'/> + <vsi managerid='12' typeid='1193046' typeidversion='1' + instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> + </interface> + <interface type='direct'> + <source dev='eth0' mode='vepa'/> + <vsi profileid='my_profile'/> + </interface> + <interface type='direct'> + <source dev='eth0' mode='vepa'/> + <vsi/> + </interface> + <interface type='direct'> + <source dev='eth0' mode='vepa'/> + </interface> + </devices> +</domain> Index: libvirt-acl/src/qemu/qemu_conf.h =================================================================== --- libvirt-acl.orig/src/qemu/qemu_conf.h +++ libvirt-acl/src/qemu/qemu_conf.h @@ -271,8 +271,6 @@ qemudOpenVhostNet(virDomainNetDefPtr net int qemudPhysIfaceConnect(virConnectPtr conn, struct qemud_driver *driver, virDomainNetDefPtr net, - char *linkdev, - int brmode, unsigned long long qemuCmdFlags); int qemudProbeMachineTypes (const char *binary, Index: libvirt-acl/src/qemu/qemu_driver.c =================================================================== --- libvirt-acl.orig/src/qemu/qemu_driver.c +++ libvirt-acl/src/qemu/qemu_driver.c @@ -3585,10 +3585,8 @@ static void qemudShutdownVMDaemon(struct def = vm->def; for (i = 0; i < def->nnets; i++) { virDomainNetDefPtr net = def->nets[i]; - if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) { - if (net->ifname) - delMacvtap(net->ifname); - } + if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) + delMacvtap(net); } #endif @@ -7175,8 +7173,6 @@ static int qemudDomainAttachNetDevice(vi } if ((tapfd = qemudPhysIfaceConnect(conn, driver, net, - net->data.direct.linkdev, - net->data.direct.mode, qemuCmdFlags)) < 0) return -1; } @@ -8146,10 +8142,8 @@ qemudDomainDetachNetDevice(struct qemud_ virNWFilterTearNWFilter(detach); #if WITH_MACVTAP - if (detach->type == VIR_DOMAIN_NET_TYPE_DIRECT) { - if (detach->ifname) - delMacvtap(detach->ifname); - } + if (detach->type == VIR_DOMAIN_NET_TYPE_DIRECT) + delMacvtap(detach); #endif if ((driver->macFilter) && (detach->ifname != NULL)) { Index: libvirt-acl/src/qemu/qemu_conf.c =================================================================== --- libvirt-acl.orig/src/qemu/qemu_conf.c +++ libvirt-acl/src/qemu/qemu_conf.c @@ -1465,8 +1465,6 @@ int qemudPhysIfaceConnect(virConnectPtr conn, struct qemud_driver *driver, virDomainNetDefPtr net, - char *linkdev, - int brmode, unsigned long long qemuCmdFlags) { int rc; @@ -1479,8 +1477,7 @@ qemudPhysIfaceConnect(virConnectPtr conn net->model && STREQ(net->model, "virtio")) vnet_hdr = 1; - rc = openMacvtapTap(net->ifname, net->mac, linkdev, brmode, - &res_ifname, vnet_hdr); + rc = openMacvtapTap(net->ifname, net, &res_ifname, vnet_hdr); if (rc >= 0) { VIR_FREE(net->ifname); net->ifname = res_ifname; @@ -1500,15 +1497,13 @@ qemudPhysIfaceConnect(virConnectPtr conn if (err) { close(rc); rc = -1; - delMacvtap(net->ifname); + delMacvtap(net); } } } #else (void)conn; (void)net; - (void)linkdev; - (void)brmode; (void)qemuCmdFlags; (void)driver; qemuReportError(VIR_ERR_INTERNAL_ERROR, @@ -4130,8 +4125,6 @@ int qemudBuildCommandLine(virConnectPtr goto no_memory; } else if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) { int tapfd = qemudPhysIfaceConnect(conn, driver, net, - net->data.direct.linkdev, - net->data.direct.mode, qemuCmdFlags); if (tapfd < 0) goto error;

5 8

[libvirt] [PATCH] Determine the root physical interface of a given interface
by Stefan Berger 11 May '10

11 May '10

In this patch I am adding functions that help to iteratively determine the root physical interface of a given interface. An example would be that a macvtap device is linked to eth0.100 which in turn is linked to eth0. Given the name or interface index of the macvtap device that is linked to eth0.100, eth0 is found by following the links to the end. I am using now the netlink library to parse the returned netlink messages and for that I am making additions to configure.ac and the rpm spec file to check for the netlink and netlink-devel packages respectively. In the configure.ac the requirement to have the netlink library is dependent on having macvtap. The setup of the upcoming VEPA patches requires knowledge over which interface to run the setup protocol. In the above case the protocol would need to run over interface eth0 and provide the knowledge of vlan id 100 in the protocol (see previous patch). Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> --- configure.ac | 24 ++++++ libvirt.spec.in | 14 ++++ src/Makefile.am | 2 src/util/macvtap.c | 185 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 224 insertions(+), 1 deletion(-) Index: libvirt-acl/src/util/macvtap.c =================================================================== --- libvirt-acl.orig/src/util/macvtap.c +++ libvirt-acl/src/util/macvtap.c @@ -41,6 +41,9 @@ # include <linux/rtnetlink.h> # include <linux/if_tun.h> +# include <netlink/attr.h> +# include <netlink/msg.h> + # include "util.h" # include "memory.h" # include "macvtap.h" @@ -421,6 +424,187 @@ buffer_too_small: } +static struct nla_policy ifla_policy[ IFLA_MAX + 1] = +{ + [IFLA_IFNAME ] = {.type = NLA_STRING }, + [IFLA_LINK] = {.type = NLA_U32 }, +}; + + +static int +link_dump(int ifindex, const char *ifname, struct nlattr **tb, + char **recvbuf) +{ + int rc = 0; + char nlmsgbuf[256]; + struct nlmsghdr *nlm = (struct nlmsghdr *)nlmsgbuf, *resp; + struct nlmsgerr *err; + char rtattbuf[64]; + struct rtattr *rta; + struct ifinfomsg i = { + .ifi_family = AF_UNSPEC, + .ifi_index = ifindex + }; + int recvbuflen; + + *recvbuf = NULL; + + memset(&nlmsgbuf, 0, sizeof(nlmsgbuf)); + + nlInit(nlm, NLM_F_REQUEST, RTM_GETLINK); + + if (!nlAppend(nlm, sizeof(nlmsgbuf), &i, sizeof(i))) + goto buffer_too_small; + + if (ifindex < 0 && ifname != NULL) { + rta = rtattrCreate(rtattbuf, sizeof(rtattbuf), IFLA_IFNAME, + ifname, strlen(ifname)+1); + if (!rta) + goto buffer_too_small; + + if (!nlAppend(nlm, sizeof(nlmsgbuf), rtattbuf, rta->rta_len)) + goto buffer_too_small; + } + + if (nlComm(nlm, recvbuf, &recvbuflen) < 0) + return -1; + + if (recvbuflen < NLMSG_LENGTH(0) || *recvbuf == NULL) + goto malformed_resp; + + resp = (struct nlmsghdr *)*recvbuf; + + switch (resp->nlmsg_type) { + case NLMSG_ERROR: + err = (struct nlmsgerr *)NLMSG_DATA(resp); + if (resp->nlmsg_len < NLMSG_LENGTH(sizeof(*err))) + goto malformed_resp; + + switch (-err->error) { + case 0: + break; + + default: + virReportSystemError(-err->error, + _("error dumping %d interface"), + ifindex); + rc = -1; + } + break; + + case GENL_ID_CTRL: + case NLMSG_DONE: + if (nlmsg_parse(resp, sizeof(struct ifinfomsg), + tb, IFLA_MAX, ifla_policy)) { + goto malformed_resp; + } + break; + + default: + goto malformed_resp; + } + + if (rc != 0) + VIR_FREE(*recvbuf); + + return rc; + +malformed_resp: + macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", + _("malformed netlink response message")); + VIR_FREE(*recvbuf); + return -1; + +buffer_too_small: + macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", + _("internal buffer is too small")); + return -1; +} + + +/* TODO: move this into interface.c after moving netlink functions into + * utils dir + */ +/** + * ifaceGetNthParent + * + * @ifindex : the index of the interface or -1 if ifname is given + * @ifname : the name of the interface; ignored if ifindex is valid + * @nthParent : the nth parent interface to get + * @rootifname : pointer to buffer of size IFNAMSIZ + * @nth : the nth parent that is actually returned; if for example eth0.100 + * was given and the 100th parent is to be returned, then eth0 will + * most likely be returned with nth set to 1 since the chain does + * not have more interfaces + * + * Get the nth parent interface of the given interface. 0 is the interface + * itself. + * + * Return 0 on success, != 0 otherwise + */ +static int +ifaceGetNthParent(int ifindex, const char *ifname, unsigned int nthParent, + char *rootifname, unsigned int *nth) +{ + int rc; + struct nlattr *tb[IFLA_MAX + 1]; + char *recvbuf = NULL; + bool end = false; + unsigned int i = 0; + + while (!end && i <= nthParent) { + rc = link_dump(ifindex, ifname, tb, &recvbuf); + if (rc) + break; + + if (tb[IFLA_IFNAME]) { + if (!virStrcpy(rootifname, (char*)RTA_DATA(tb[IFLA_IFNAME]), + IFNAMSIZ)) { + macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", + _("buffer for root interface name is too small")); + VIR_FREE(recvbuf); + return 1; + } + } + + if (tb[IFLA_LINK]) { + ifindex = *(int *)RTA_DATA(tb[IFLA_LINK]); + ifname = NULL; + } else + end = true; + + VIR_FREE(recvbuf); + + i++; + } + + if (nth) + *nth = i-1; + + return rc; +} + + +/** + * ifaceGetRootIface + * + * @ifindex : the index of the interface or -1 if ifname is given + * @ifname : the name of the interface; ignored if ifindex is valid + * @rootifname : pointer to buffer of size IFNAMSIZ + * + * Get the root interface of a given interface, i.e., if macvtap + * is linked to eth0.100, it will return eth0. + * + * Return 0 on success, != 0 otherwise + */ +static int +ifaceGetRootIface(int ifindex, const char *ifname, + char *rootifname) +{ + return ifaceGetNthParent(ifindex, ifname, ~0, rootifname, NULL); +} + + /* Open the macvtap's tap device. * @ifname: Name of the macvtap interface * @retries : Number of retries in case udev for example may need to be Index: libvirt-acl/src/Makefile.am =================================================================== --- libvirt-acl.orig/src/Makefile.am +++ libvirt-acl/src/Makefile.am @@ -932,7 +932,7 @@ libvirt_la_LDFLAGS = $(VERSION_SCRIPT_FL -version-info $(LIBVIRT_VERSION_INFO) \ $(COVERAGE_CFLAGS:-f%=-Wc,-f%) \ $(LIBXML_LIBS) \ - $(LIBPCAP_LIBS) \ + $(LIBPCAP_LIBS) $(LIBNL_LIBS) \ $(DRIVER_MODULE_LIBS) \ $(CYGWIN_EXTRA_LDFLAGS) $(MINGW_EXTRA_LDFLAGS) libvirt_la_CFLAGS = $(COVERAGE_CFLAGS) -DIN_LIBVIRT @@ -985,7 +985,7 @@ libvirt_lxc_SOURCES = \ $(NWFILTER_PARAM_CONF_SOURCES) libvirt_lxc_LDFLAGS = $(WARN_CFLAGS) $(COVERAGE_LDCFLAGS) $(CAPNG_LIBS) $(YAJL_LIBS) libvirt_lxc_LDADD = $(LIBXML_LIBS) $(NUMACTL_LIBS) $(LIB_PTHREAD) \ - ../gnulib/lib/libgnu.la + $(LIBNL_LIBS) ../gnulib/lib/libgnu.la libvirt_lxc_CFLAGS = \ $(LIBPARTED_CFLAGS) \ $(NUMACTL_CFLAGS) \ Index: libvirt-acl/configure.ac =================================================================== --- libvirt-acl.orig/configure.ac +++ libvirt-acl/configure.ac @@ -42,6 +42,7 @@ HAL_REQUIRED=0.5.0 DEVMAPPER_REQUIRED=1.0.0 LIBCURL_REQUIRED="7.18.0" LIBPCAP_REQUIRED="1.0.0" +LIBNL_REQUIRED="1.1" dnl Checks for C compiler. AC_PROG_CC @@ -2005,6 +2006,24 @@ fi AM_CONDITIONAL([WITH_MACVTAP], [test "$with_macvtap" = "yes"]) +dnl netlink library + +LIBNL_CFLAGS="" +LIBNL_LIBS="" + +if test "$with_macvtap" = "yes"; then + PKG_CHECK_MODULES(LIBNL, libnl-1 >= $LIBNL_REQUIRED, [ + ], [ + AC_MSG_ERROR([libnl >= $LIBNL_REQUIRED is required for macvtap support]) + ]) +fi + +AC_SUBST([LIBNL_CFLAGS]) +AC_SUBST([LIBNL_LIBS]) + + + + # Only COPYING.LIB is under version control, yet COPYING # is included as part of the distribution tarball. # Copy one to the other, but only if this is a srcdir-build. @@ -2183,6 +2202,11 @@ AC_MSG_NOTICE([ pcap: $LIBPCAP_CFLAGS else AC_MSG_NOTICE([ pcap: no]) fi +if test "$with_macvtap" = "yes" ; then +AC_MSG_NOTICE([ nl: $LIBNL_CFLAGS $LIBNL_LIBS]) +else +AC_MSG_NOTICE([ nl: no]) +fi AC_MSG_NOTICE([]) AC_MSG_NOTICE([Test suite]) AC_MSG_NOTICE([]) Index: libvirt-acl/libvirt.spec.in =================================================================== --- libvirt-acl.orig/libvirt.spec.in +++ libvirt-acl/libvirt.spec.in @@ -63,6 +63,7 @@ %define with_yajl 0%{!?_without_yajl:0} %define with_nwfilter 0%{!?_without_nwfilter:0} %define with_libpcap 0%{!?_without_libpcap:0} +%define with_macvtap 0%{!?_without_macvtap:0} # Non-server/HV driver defaults which are always enabled %define with_python 0%{!?_without_python:1} @@ -153,6 +154,11 @@ %if %{with_qemu} %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}} %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}} +%define with_macvtap 0%{!?_without_macvtap:%{server_drivers}} +%endif + +%if %{with_macvtap} +%define with_libnl 1 %endif # Force QEMU to run as non-root @@ -282,6 +288,9 @@ BuildRequires: yajl-devel %if %{with_libpcap} BuildRequires: libpcap-devel %endif +%if %{with_libnl} +BuildRequires: libnl-devel +%endif %if %{with_avahi} BuildRequires: avahi-devel %endif @@ -531,6 +540,10 @@ of recent versions of Linux (and other O %define _without_libpcap --without-libpcap %endif +%if ! %{with_macvtap} +%define _without_macvtap --without-macvtap +%endif + %configure %{?_without_xen} \ %{?_without_qemu} \ %{?_without_openvz} \ @@ -560,6 +573,7 @@ of recent versions of Linux (and other O %{?_without_udev} \ %{?_without_yajl} \ %{?_without_libpcap} \ + %{?_without_macvtap} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-init-script=redhat \

2 2

[libvirt] [PATCH 0/2] build: update gnulib
by Eric Blake 11 May '10

11 May '10

The latest gnulib finds a couple more syntax-check cleanups, but it also required some work to avoid requiring gettext 0.18 (since using software just released yesterday won't fly for supporting RHEL5). [PATCH 1/2] build: allow older gettext [PATCH 2/2] build: update gnulib .gnulib | 2 +- bootstrap.conf | 2 +- src/esx/esx_util.c | 6 ------ src/remote/remote_driver.c | 5 ----- tools/virsh.c | 7 +------ 5 files changed, 3 insertions(+), 19 deletions(-)

2 4

[libvirt] [PATCH] tests: correct PATH in new test, for when running manually
by Jim Meyering 11 May '10

11 May '10

I'd prepended a *file* to PATH, not the containing directory. The bug would have shown up only when running this test manually. >From 9339dec535beeeb18c96380f0163d3aeb604a0dc Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering(a)redhat.com> Date: Tue, 11 May 2010 17:43:16 +0200 Subject: [PATCH] tests: correct PATH in new test, for when running manually * tests/virsh-schedinfo: This test sets PATH internally, just in case you're running it manually. Normally, the PATH setting from tests/Makefile.am's TESTS_ENVIRONMENT is sufficient. Prepend the correct directory, and take advantage of the PATH setting in one more case. --- tests/virsh-schedinfo | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/tests/virsh-schedinfo b/tests/virsh-schedinfo index b276a2e..a2ec193 100755 --- a/tests/virsh-schedinfo +++ b/tests/virsh-schedinfo @@ -20,17 +20,17 @@ : ${abs_top_srcdir=$(pwd)/..} : ${abs_top_builddir=$(pwd)/..} -# If $abs_top_builddir/tools/virsh is not early in $PATH, put it there, +# If $abs_top_builddir/tools is not early in $PATH, put it there, # so that we can safely invoke "virsh" simply with its name. case $PATH in - $abs_top_builddir/tools/src:$abs_top_builddir/tools/virsh:*) ;; - $abs_top_builddir/tools/virsh:*) ;; - *) PATH=$abs_top_builddir/tools/virsh:$PATH; export PATH ;; + $abs_top_builddir/tools/src:$abs_top_builddir/tools:*) ;; + $abs_top_builddir/tools:*) ;; + *) PATH=$abs_top_builddir/tools:$PATH; export PATH ;; esac if test "$VERBOSE" = yes; then set -x - $abs_top_builddir/tools/virsh --version + virsh --version fi . "$srcdir/test-lib.sh" -- 1.7.1.189.g07419

2 2

[libvirt] [0/2] Fix 2 possible crashes in JSON event dispatch
by Daniel P. Berrange 11 May '10

11 May '10

A couple of places didn't do sufficient NULL checks in handling dispatch of JSON events, so can crash under certain conditions.

2 4

[libvirt] [PATCH] virsh: schedinfo --set invalid=value would simply ignore the option
by Jim Meyering 11 May '10

11 May '10

Currently, virsh does this: $ virsh -c test:///default schedinfo 1 --set j=k>/dev/null && echo bad bad It should have diagnosed "j=k" as an invalid schedinfo --set argument. With the patch below, it does: $ ./virsh -c test:///default schedinfo 1 --set j=k>/dev/null && echo bad error: invalid scheduler option: j=k [Exit 1] >From cf56648333c4e5cf73ab3292ba727e33b0ae9708 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering(a)redhat.com> Date: Tue, 11 May 2010 15:38:21 +0200 Subject: [PATCH] virsh: schedinfo --set invalid=value would simply ignore the option For example, virsh -c test:///default schedinfo 1 --set P=k would mistakenly exit successfully, giving no indication that it had failed to set the scheduling parameter "P". * tools/virsh.c (cmdSchedinfo): Diagnose an invalid --set j=k option, rather than silently ignoring it. * tests/virsh-schedinfo: New test for the above. * tests/Makefile.am (test_scripts): Add it. Reported by Jintao Yang in http://bugzilla.redhat.com/586632 --- tests/Makefile.am | 1 + tests/virsh-schedinfo | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ tools/virsh.c | 10 ++++++++++ 3 files changed, 60 insertions(+), 0 deletions(-) create mode 100755 tests/virsh-schedinfo diff --git a/tests/Makefile.am b/tests/Makefile.am index ef12386..b5e09e3 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -139,6 +139,7 @@ test_scripts += \ undefine \ vcpupin \ virsh-all \ + virsh-schedinfo \ virsh-synopsis endif diff --git a/tests/virsh-schedinfo b/tests/virsh-schedinfo new file mode 100755 index 0000000..116014a --- /dev/null +++ b/tests/virsh-schedinfo @@ -0,0 +1,49 @@ +#!/bin/sh +# Ensure that virsh schedinfo --set invalid=val fails + +# Copyright (C) 2010 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +: ${srcdir=$(pwd)} +: ${abs_top_srcdir=$(pwd)/..} +: ${abs_top_builddir=$(pwd)/..} + +# If $abs_top_builddir/tools/virsh is not early in $PATH, put it there, +# so that we can safely invoke "virsh" simply with its name. +case $PATH in + $abs_top_builddir/tools/src:$abs_top_builddir/tools/virsh:*) ;; + $abs_top_builddir/tools/virsh:*) ;; + *) PATH=$abs_top_builddir/tools/virsh:$PATH; export PATH ;; +esac + +if test "$VERBOSE" = yes; then + set -x + $abs_top_builddir/tools/virsh --version +fi + +. "$srcdir/test-lib.sh" + +printf 'Scheduler : fair\n\n' > exp-out || framework_failure +printf 'error: invalid scheduler option: j=k\n' > exp-err || framework_failure + +fail=0 + +test_url=test:///default + +virsh -c $test_url schedinfo 1 --set j=k >out 2>err && fail=1 +compare out exp-out || fail=1 +compare err exp-err || fail=1 + +(exit $fail); exit $fail diff --git a/tools/virsh.c b/tools/virsh.c index 0a63f1b..99f383a 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -1594,6 +1594,16 @@ cmdSchedinfo(vshControl *ctl, const vshCmd *cmd) ret = virDomainGetSchedulerParameters(dom, params, &nparams); if (ret == -1) goto cleanup; + } else { + /* See if we've tried to --set var=val. If so, the fact that + we reach this point (with update == 0) means that "var" did + not match any of the settable parameters. Report the error. */ + char *var_value_pair = vshCommandOptString(cmd, "set", NULL); + if (var_value_pair) { + vshError(ctl, _("invalid scheduler option: %s"), + var_value_pair); + goto cleanup; + } } ret_val = TRUE; -- 1.7.1.189.g07419

3 3

[libvirt] [PATCH] virsh: fix a typo in a diagnostic
by Jim Meyering 11 May '10

11 May '10

FYI, I've just pushed these two typo fixes: >From 5603515127ff14b70bd6a24db1485043a6b817a7 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering(a)redhat.com> Date: Tue, 11 May 2010 16:02:28 +0200 Subject: [PATCH] virsh: fix a typo in a diagnostic * tools/virsh.c (cmdSchedInfoUpdate): Fix typo in a diagnostic: s/an long long/a long long/. One in a comment, too. --- tools/virsh.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index 0a63f1b..b9bf06d 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -88,7 +88,7 @@ static char *progname; /** * vshErrorLevel: * - * Indicates the level of an log message + * Indicates the level of a log message */ typedef enum { VSH_ERR_DEBUG = 0, @@ -1510,7 +1510,7 @@ cmdSchedInfoUpdate(vshControl *ctl, const vshCmd *cmd, case VIR_DOMAIN_SCHED_FIELD_LLONG: if (virStrToLong_ll(val, NULL, 10, &param->value.l) < 0) { vshError(ctl, "%s", - _("Invalid value for parameter, expecting an long long")); + _("Invalid value for parameter, expecting a long long")); return -1; } break; -- 1.7.1.189.g07419

1 0

[libvirt] Build failure on RHEL-5
by Chris Lalancette 11 May '10

11 May '10

Hello, My autobuild of libvirt on RHEL-5 failed last night because of: if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../gnulib/lib -I../gnulib/lib -I../include -I../include -I../src -I../src/util -I../src/conf -I../src/remote -I/usr/include/libxml2 -Wall -Wformat -Wformat-security -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wextra -Wshadow -Wcast-align -Wwrite-strings -Waggregate-return -Wstrict-prototypes -Winline -Wredundant-decls -Wno-sign-compare -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fasynchronous-unwind-tables -fdiagnostics-show-option -Werror -DLOCAL_STATE_DIR="\"/usr/local/var\"" -DSYSCONF_DIR="\"/usr/local/etc\"" -DQEMUD_PID_FILE="\"\"" -DREMOTE_PID_FILE="\"/usr/local/var/run/libvirtd.pid\"" -DGETTEXT_PACKAGE=\"libvirt\" -D_REENTRANT -g -O2 -MT libvirtd-dispatch.o -MD -MP -MF ".deps/libvirtd-dispatch.Tpo" -c -o libvirtd-dispatch.o `test -f 'dispatch.c' || echo './'`dispatch.c; \ then mv -f ".deps/libvirtd-dispatch.Tpo" ".deps/libvirtd-dispatch.Po"; else rm -f ".deps/libvirtd-dispatch.Tpo"; exit 1; fi cc1: warnings being treated as errors dispatch.c: In function 'remoteDispatchClientCall': dispatch.c:444: warning: value computed is not used Git head revision: 78a6af1ff9cdbb799f9e02d1f0160b2f9ee61cd9 >From a quick look, I can't quite see what it is complaining about; args is clearly used later in the function, so it's kind of weird. Anyway, if anyone has time to look, it's probably something we should fix. -- Chris Lalancette

1 0

[libvirt] [PATCH] docs/Makefile.am: remove unnecessary subshells
by Eric Blake 11 May '10

11 May '10

* docs/Makefile.am (ChangeLog.html.in, %.html.tmp, %.html) (html/index.html, $(devhelphtml)): Avoid spurious subshells. --- I'm still having problems getting a VPATH build to work correctly, but noticed this low-hanging fruit in the process. Reformatting to 80 columns is a nice side effect. docs/Makefile.am | 35 ++++++++++++++++++++--------------- 1 files changed, 20 insertions(+), 15 deletions(-) diff --git a/docs/Makefile.am b/docs/Makefile.am index a18821b..70b9e51 100644 --- a/docs/Makefile.am +++ b/docs/Makefile.am @@ -91,44 +91,49 @@ ChangeLog.xml: ../ChangeLog ChangeLog.awk awk -f ChangeLog.awk < $< > $@ ChangeLog.html.in: ChangeLog.xml ChangeLog.xsl - @(if [ -x $(XSLTPROC) ] ; then \ + @if [ -x $(XSLTPROC) ] ; then \ echo "Generating $@"; \ name=`echo $@ | sed -e 's/.tmp//'`; \ - $(XSLTPROC) --nonet $(top_srcdir)/docs/ChangeLog.xsl $< > $@ || (rm $@ && exit 1) ; fi ) + $(XSLTPROC) --nonet $(top_srcdir)/docs/ChangeLog.xsl $< > $@ \ + || { rm $@ && exit 1; }; fi %.png: %.fig convert -rotate 90 $< $@ %.html.tmp: %.html.in site.xsl page.xsl sitemap.html.in - @(if [ -x $(XSLTPROC) ] ; then \ + @if [ -x $(XSLTPROC) ] ; then \ echo "Generating $@"; \ name=`echo $@ | sed -e 's/.tmp//'`; \ - $(XSLTPROC) --stringparam pagename $$name --nonet --html $(top_srcdir)/docs/site.xsl $< > $@ || (rm $@ && exit 1) ; fi ) + $(XSLTPROC) --stringparam pagename $$name --nonet --html \ + $(top_srcdir)/docs/site.xsl $< > $@ \ + || { rm $@ && exit 1; }; fi %.html: %.html.tmp - @(if test -x $(XMLLINT) && test -x $(XMLCATALOG) ; then \ - if $(XMLCATALOG) /etc/xml/catalog "-//W3C//DTD XHTML 1.0 Strict//EN" > /dev/null ; then \ + @if test -x $(XMLLINT) && test -x $(XMLCATALOG) ; then \ + if $(XMLCATALOG) /etc/xml/catalog \ + "-//W3C//DTD XHTML 1.0 Strict//EN" > /dev/null ; then \ echo "Validating $@" ; \ - $(XMLLINT) --nonet --format --valid $< > $@ || (rm $@ && exit 1) ; \ - else echo "missing XHTML1 DTD" ; fi ; fi ); + $(XMLLINT) --nonet --format --valid $< > $@ \ + || { rm $@ && exit 1; }; \ + else echo "missing XHTML1 DTD" ; fi ; fi html/index.html: libvirt-api.xml newapi.xsl page.xsl sitemap.html.in - -@(if [ -x $(XSLTPROC) ] ; then \ + -@if [ -x $(XSLTPROC) ] ; then \ echo "Rebuilding the HTML pages from the XML API" ; \ - $(XSLTPROC) --nonet $(srcdir)/newapi.xsl libvirt-api.xml ; fi ) - -@(if test -x $(XMLLINT) && test -x $(XMLCATALOG) ; then \ + $(XSLTPROC) --nonet $(srcdir)/newapi.xsl libvirt-api.xml ; fi + -@if test -x $(XMLLINT) && test -x $(XMLCATALOG) ; then \ if $(XMLCATALOG) /etc/xml/catalog "-//W3C//DTD XHTML 1.0 Strict//EN" \ > /dev/null ; then \ echo "Validating the resulting XHTML pages" ; \ $(XMLLINT) --nonet --valid --noout html/*.html ; \ - else echo "missing XHTML1 DTD" ; fi ; fi ); + else echo "missing XHTML1 DTD" ; fi ; fi $(devhelphtml): libvirt-api.xml $(devhelpxsl) - -@(echo Rebuilding devhelp files) - -@(if [ -x $(XSLTPROC) ] ; then \ + -@echo Rebuilding devhelp files + -@if [ -x $(XSLTPROC) ] ; then \ $(XSLTPROC) --nonet -o devhelp/libvirt.devhelp \ - $(top_srcdir)/docs/devhelp/devhelp.xsl libvirt-api.xml ; fi ); + $(top_srcdir)/docs/devhelp/devhelp.xsl libvirt-api.xml ; fi html/%-%.html html/%-virterror.html %-api.xml %-refs.xml: $(srcdir)/apibuild.py -srcdir=$(srcdir) $(srcdir)/apibuild.py -- 1.6.6.1

2 1

[libvirt] locking down struct size/layout in remote-protocol.x
by Jim Meyering 11 May '10

11 May '10

This week we noticed that a change to struct remote_error was causing trouble (new member addition changed the size of the object being decoded -- bad for the protocol). In order to ensure that no such changes sneak in again, I'm planning to do the following. First, count how many structs must not change size or layout: $ grep -E '^struct remote_' src/*/remote_protocol.x|wc -l 318 Obviously not appropriate to do it manually. Running this (pdwtags is part of the dwarves package): pdwtags src/libvirt_driver_remote_la-remote_protocol.o prints, among other things, detailed type info for every struct: /* 89 */ struct remote_nonnull_domain { remote_nonnull_string name; /* 0 8 */ remote_uuid uuid; /* 8 16 */ int id; /* 24 4 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ /* BRAIN FART ALERT! 32 != 28 + 0(holes), diff = 4 */ }; /* size: 32 */ /* 90 */ typedef struct remote_nonnull_domain remote_nonnull_domain; /* size: 32 */ /* 91 */ struct remote_nonnull_network { remote_nonnull_string name; /* 0 8 */ remote_uuid uuid; /* 8 16 */ /* size: 24, cachelines: 1, members: 2 */ /* last cacheline: 24 bytes */ }; /* size: 24 */ ----------------------------------------------------- A) For each of the above matching /^struct remote_/, print at the very least this sort of compile-time check: verify (sizeof (struct remote_nonnull_domain) == 32); verify (sizeof (struct remote_nonnull_network) == 24); B) Even better, verify member offsets, so that we'd detect reordered members (which often will not change struct size): verify (sizeof (struct remote_nonnull_domain) == 32); verify (offsetof (struct remote_nonnull_domain, name) == 0); verify (offsetof (struct remote_nonnull_domain, uuid) == 8); verify (offsetof (struct remote_nonnull_domain, id) == 24); verify (sizeof (struct remote_nonnull_network) == 24); verify (offsetof (struct remote_nonnull_network, name) == 0); verify (offsetof (struct remote_nonnull_network, uuid) == 16); C) Might as well verify member sizes as well. ----------------------------------------------------- Once we have a small script to generate that (RSN), include the generated, (and version-controlled) file from remote_protocol.c, and we're done. For reference, here's code to generate A): pdwtags src/libvirt_driver_remote_la-remote_protocol.o \ | perl -0777 -n \ -e 'foreach my $p (split m!\n\n/\* \d+ \*/\n!)' \ -e ' { $p =~ m!^struct (remote_\w+).*/\* size: (\d+) \*/!s' \ -e ' and print "verify (sizeof (struct $1) == $2);\n" }' And here's a sample of its output: verify (sizeof (struct remote_nonnull_domain) == 32); verify (sizeof (struct remote_nonnull_network) == 24); verify (sizeof (struct remote_nonnull_nwfilter) == 24); verify (sizeof (struct remote_nonnull_interface) == 16); verify (sizeof (struct remote_nonnull_storage_pool) == 24); verify (sizeof (struct remote_nonnull_storage_vol) == 24); verify (sizeof (struct remote_nonnull_node_device) == 8); ... verify (sizeof (struct remote_domain_has_current_snapshot_args) == 40); verify (sizeof (struct remote_domain_has_current_snapshot_ret) == 4); verify (sizeof (struct remote_domain_snapshot_current_args) == 40); verify (sizeof (struct remote_domain_snapshot_current_ret) == 40); verify (sizeof (struct remote_domain_revert_to_snapshot_args) == 48); verify (sizeof (struct remote_domain_snapshot_delete_args) == 48); verify (sizeof (struct remote_message_header) == 24);

3 15

[libvirt] [PATCH] delMacvtap: typo fix
by Eric Blake 11 May '10

11 May '10

* src/util/macvtap.c (delMacvtap): Fix documentation. --- Pushing as trivial. src/util/macvtap.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/util/macvtap.c b/src/util/macvtap.c index 5d129fd..1f8dd29 100644 --- a/src/util/macvtap.c +++ b/src/util/macvtap.c @@ -669,13 +669,13 @@ link_del_exit: return rc; } /** - * delMacvtapByName: + * delMacvtap: * @ifname : The name of the macvtap interface * * Delete an interface given its name. */ void delMacvtap(const char *ifname) -- 1.7.0.1

2 1

[libvirt] [PATCH] maint: allow VPATH use of remote_protocol-structs
by Eric Blake 10 May '10

10 May '10

* src/Makefile.am (remote_protocol-structs): Ensure file lives in srcdir. --- Jim's new check didn't quite work in a VPATH setup. I'm applying it as obvious, since it was a build-breaker: GEN remote_protocol-structs diff: remote_protocol-structs: No such file or directory make[3]: *** [remote_protocol-structs] Error 2 src/Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index 1542ab1..15bc8fc 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -179,7 +179,7 @@ remote_protocol-structs: -e ' $$p =~ s!\s+$$!!;' \ -e ' print "$$p\n" } }' \ > $@-t; \ - diff -u $@-t $@; st=$$?; rm -f $@-t; exit $$st; \ + diff -u $@-t $(srcdir)/$@; st=$$?; rm -f $@-t; exit $$st; \ else \ echo 'WARNING: you lack pdwtags; skipping the $@ test'; \ echo 'WARNING: install the dwarves package to get pdwtags'; \ -- 1.7.0.1

1 0

[libvirt] [PATCH] build: fix autogen rule for VPATH build
by Eric Blake 10 May '10

10 May '10

* cfg.mk (gnulib_srcdir): Override maint.mk default. (_update_required): Run in correct directory. --- I noticed an error message about bootstrap.conf not found when trying to do a VPATH build for my new clang setup. This subsumes up my earlier patch to declare the correct gnulib_srcdir, as noticed by Jim, but does not advance to a newer .gnulib, as there are some other issues to fix on that front first. cfg.mk | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/cfg.mk b/cfg.mk index 105b625..a6e9204 100644 --- a/cfg.mk +++ b/cfg.mk @@ -24,6 +24,9 @@ gnu_rel_host = $(gnu_ftp_host-$(RELEASE_TYPE)) url_dir_list = \ ftp://$(gnu_rel_host)/gnu/coreutils +# We use .gnulib, not gnulib. +gnulib_srcdir = $(srcdir)/.gnulib + # Tests not to run as part of "make distcheck". local-checks-to-skip = \ changelog-check \ @@ -282,6 +285,7 @@ ifeq (0,$(MAKELEVEL)) # b653eda3ac4864de205419d9f41eec267cb89eeb _submodule_hash = sed 's/^[ +-]//;s/ .*//' _update_required := $(shell \ + cd '$(srcdir)'; \ actual=$$(git submodule status | $(_submodule_hash); \ git hash-object bootstrap.conf; \ git diff .gnulib); \ -- 1.6.6.1

4 18

[libvirt] question on network interface of LXC domain
by Osier Yang 10 May '10

10 May '10

Hello there with newest libvirt, when I connect to the container via console, then execute "ifconfig", there will be no output, though the network works fine. and "/proc/net/dev" of container seems good too. (has entries about "eth0" and "lo"). I traced the call procedure of "ifconfig", it reads the infomations of network interface from "/proc/net/dev" and vise visa. so I'm confused about what cause this problem. there is no problem with libvirt-0.8.0-4. Thanks and Regards Osier

2 1

[libvirt] [PATCH] more interface functions; some needed for VEPA
by Stefan Berger 07 May '10

07 May '10

In the attached patch I am refactoring the function that changes the flags on an interface to call a separate function to first read the flags on the interface. This function that reads the flags then becomes public. I am also adding a function that test whether an interface is currently up. This prevents other code to have to include interface related include files. Then there is a new function that reads the VLANid of a VLAN interface via an ioctl(). This one will be needed by upcoming VEPA related patches. On cygwin for example none of the newly added functions are available. The flags related function could not be exported due to missing PF_PACKET -- or maybe other type of protocol that needs to be used when opening the socket for running the ioctl() on. Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> --- src/libvirt_private.syms | 2 + src/util/interface.c | 76 ++++++++++++++++++++++++++++++++++++++++------- src/util/interface.h | 3 + 3 files changed, 70 insertions(+), 11 deletions(-) Index: libvirt-acl/src/util/interface.c =================================================================== --- libvirt-acl.orig/src/util/interface.c +++ libvirt-acl/src/util/interface.c @@ -30,6 +30,8 @@ #ifdef __linux__ # include <linux/if.h> +# include <linux/sockios.h> +# include <linux/if_vlan.h> #endif #include "internal.h" @@ -42,6 +44,85 @@ virReportErrorHelper(NULL, VIR_FROM_NET, code, __FILE__, \ __FUNCTION__, __LINE__, __VA_ARGS__) +#if __linux__ +static int +getFlags(int fd, const char *ifname, struct ifreq *ifr) { + + memset(ifr, 0, sizeof(*ifr)); + + if (virStrncpy(ifr->ifr_name, + ifname, strlen(ifname), sizeof(ifr->ifr_name)) == NULL) + return ENODEV; + + if (ioctl(fd, SIOCGIFFLAGS, ifr) < 0) + return errno; + + return 0; +} + + +/** + * ifaceGetFlags + * + * @ifname : name of the interface + * @flags : pointer to short holding the flags on success + * + * Get the flags of the interface. Returns 0 on success, error code on failure. + */ +int +ifaceGetFlags(const char *ifname, short *flags) { + struct ifreq ifr; + int rc; + int fd = socket(PF_PACKET, SOCK_DGRAM, 0); + + if (fd < 0) + return errno; + + rc = getFlags(fd, ifname, &ifr); + + *flags = ifr.ifr_flags; + + close(fd); + + return rc; +} + + +int +ifaceIsUp(const char *ifname, bool *up) { + short flags; + int rc = ifaceGetFlags(ifname, &flags); + + if (rc) + return rc; + + *up = ((flags & IFF_UP) == IFF_UP); + + return 0; +} +#else + +/* Note: Showstopper on cygwin is only missing PF_PACKET */ + +int +ifaceGetFlags(const char *ifname ATTRIBUTE_UNUSED, + short *flags ATTRIBUTE_UNUSED) { + ifaceError(VIR_ERR_INTERNAL_ERROR, "%s", + _("ifaceGetFlags is not supported on non-linux platforms")); + return ENOSYS; +} + +int +ifaceIsUp(const char *ifname ATTRIBUTE_UNUSED, + bool *up ATTRIBUTE_UNUSED) { + + ifaceError(VIR_ERR_INTERNAL_ERROR, "%s", + _("ifaceIsUp is not supported on non-linux platforms")); + return ENOSYS; +} + +#endif /* __linux__ */ + /* * chgIfaceFlags: Change flags on an interface * @@ -59,23 +140,16 @@ static int chgIfaceFlags(const char *ifname, short flagclear, short flagset) { struct ifreq ifr; int rc = 0; - int flags; + short flags; short flagmask = (~0 ^ flagclear); int fd = socket(PF_PACKET, SOCK_DGRAM, 0); if (fd < 0) return errno; - if (virStrncpy(ifr.ifr_name, - ifname, strlen(ifname), sizeof(ifr.ifr_name)) == NULL) { - rc = ENODEV; + rc = getFlags(fd, ifname, &ifr); + if (rc != 0) goto err_exit; - } - - if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) { - rc = errno; - goto err_exit; - } flags = (ifr.ifr_flags & flagmask) | flagset; @@ -151,6 +225,8 @@ ifaceCheck(bool reportError, const char if (fd < 0) return errno; + memset(&ifr, 0, sizeof(ifr)); + if (virStrncpy(ifr.ifr_name, ifname, strlen(ifname), sizeof(ifr.ifr_name)) == NULL) { if (reportError) @@ -227,6 +303,8 @@ ifaceGetIndex(bool reportError, const ch if (fd < 0) return errno; + memset(&ifreq, 0, sizeof(ifreq)); + if (virStrncpy(ifreq.ifr_name, ifname, strlen(ifname), sizeof(ifreq.ifr_name)) == NULL) { if (reportError) @@ -269,3 +347,46 @@ ifaceGetIndex(bool reportError, } #endif /* __linux__ */ + +#ifdef __linux__ +int +ifaceGetVlanID(const char *vlanifname, int *vlanid) { + struct vlan_ioctl_args vlanargs = { + .cmd = GET_VLAN_VID_CMD, + }; + int rc = 0; + int fd = socket(PF_PACKET, SOCK_DGRAM, 0); + + if (fd < 0) + return errno; + + if (virStrcpyStatic(vlanargs.device1, vlanifname) == NULL) { + rc = EINVAL; + goto err_exit; + } + + if (ioctl(fd, SIOCGIFVLAN, &vlanargs) != 0) { + rc = errno; + goto err_exit; + } + + *vlanid = vlanargs.u.VID; + + err_exit: + close(fd); + + return rc; +} + +#else + +int +ifaceGetVlanID(const char *vlanifname ATTRIBUTE_UNUSED, + int *vlanid ATTRIBUTE_UNUSED) { + + ifaceError(VIR_ERR_INTERNAL_ERROR, "%s", + _("ifaceGetVlanID is not supported on non-linux platforms")); + + return ENOSYS; +} +#endif /* __linux__ */ Index: libvirt-acl/src/util/interface.h =================================================================== --- libvirt-acl.orig/src/util/interface.h +++ libvirt-acl/src/util/interface.h @@ -12,6 +12,9 @@ # include "datatypes.h" +int ifaceGetFlags(const char *name, short *flags); +int ifaceIsUp(const char *name, bool *up); + int ifaceCtrl(const char *name, bool up); static inline int ifaceUp(const char *name) { @@ -27,4 +30,6 @@ int ifaceCheck(bool reportError, const c int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex); +int ifaceGetVlanID(const char *vlanifname, int *vlanid); + #endif /* __VIR_INTERFACE_H__ */ Index: libvirt-acl/src/libvirt_private.syms =================================================================== --- libvirt-acl.orig/src/libvirt_private.syms +++ libvirt-acl/src/libvirt_private.syms @@ -685,6 +685,9 @@ virArgvToString; ifaceCtrl; ifaceCheck; ifaceGetIndex; +ifaceGetFlags; +ifaceIsUp; +ifaceGetVlanID; # usb.h usbGetDevice;

2 3

[libvirt] [PATCH] mingw32-libvirt.spec: bring up to date
by Eric Blake 07 May '10

07 May '10

Right now, mingw32-portablexdr is not available in Fedora, but is present in fedora-mingw.git. With that package, plus redhat-rpm-config and this patch, it is once again possible to build mingw32-libvirt from a Fedora 12 host. * mingw32-libvirt.spec.in (__debug_install_post): Override. (%files): Mention recent additions. --- The __debug_install_post trick is something that Richard Jones taught me while figuring out how to get mingw32-portablexdr. Also, during that effort, we discovered this bug in rpm: https://bugzilla.redhat.com/show_bug.cgi?id=587818 you have to have redhat-rpm-config installed to work around it. mingw32-libvirt.spec.in | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/mingw32-libvirt.spec.in b/mingw32-libvirt.spec.in index 867a849..fc90203 100644 --- a/mingw32-libvirt.spec.in +++ b/mingw32-libvirt.spec.in @@ -3,6 +3,7 @@ %define _use_internal_dependency_generator 0 %define __find_requires %{_mingw32_findrequires} %define __find_provides %{_mingw32_findprovides} +%define __debug_install_post %{_mingw32_debug_install_post} Name: mingw32-libvirt Version: @VERSION@ @@ -30,6 +31,7 @@ BuildRequires: gettext BuildArch: noarch +%{?_mingw32_debug_package} %description MinGW Windows libvirt virtualization library. @@ -95,9 +97,12 @@ rm -rf $RPM_BUILD_ROOT %{_mingw32_datadir}/libvirt/schemas/nodedev.rng %{_mingw32_datadir}/libvirt/schemas/capability.rng %{_mingw32_datadir}/libvirt/schemas/interface.rng +%{_mingw32_datadir}/libvirt/schemas/nwfilter.rng %{_mingw32_datadir}/libvirt/schemas/secret.rng %{_mingw32_datadir}/libvirt/schemas/storageencryption.rng +%{_mingw32_datadir}/libvirt/cpu_map.xml + %{_mingw32_datadir}/locale/*/LC_MESSAGES/libvirt.mo %dir %{_mingw32_includedir}/libvirt -- 1.6.6.1

2 2

[libvirt] [PATCH] Fix pthread related link error for virt-aa-helper
by Matthias Bolte 07 May '10

07 May '10

Link virt-aa-helper explicitly with pthread. This is at least required on Ubuntu 10.04. --- I just pushed this one, as it qualifies as trivial compile fix. src/Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index 2025208..0da30bb 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -1002,7 +1002,7 @@ libexec_PROGRAMS += virt-aa-helper virt_aa_helper_SOURCES = $(SECURITY_DRIVER_APPARMOR_HELPER_SOURCES) -virt_aa_helper_LDFLAGS = $(WARN_CFLAGS) +virt_aa_helper_LDFLAGS = $(WARN_CFLAGS) $(LIB_PTHREAD) virt_aa_helper_LDADD = \ $(WARN_CFLAGS) \ $(LIBXML_LIBS) \ -- 1.7.0.4

3 10

[libvirt] small typo in "Terminology and goals" page
by Ersek, Laszlo 07 May '10

07 May '10

Hi, there seems to be a typo in http://libvirt.org/goals.html "Multiple mode may be accessed with libvirt simultaneously but the APIs are limited to single node operations." I think that was intended as "Multiple *nodes*". If not: sorry :) Cheers, lacos

2 1

[libvirt] [Reminder] KVM Forum 2010: Call for Papers
by KVM Forum 2010 Program Committee 07 May '10

07 May '10

Just a reminder...The submission deadline is in one week. thanks, -KVM Forum 2010 Program Commitee -- ================================================================= CALL FOR PAPERS KVM Forum 2010 ================================================================= DESCRIPTION The KVM Forum is back! After a break last year we're proud to present this year's gathering around KVM again. The idea is to have everyone involved with KVM development come together to talk about the future and current state of KVM, teaching everyone some pieces of the puzzle they might be missing without. So if you're a KVM developer, mark the dates in your calendar! If possible, also submit a talk -- we're interested in a wide variety of KVM topics, so don't hesitate to propose a talk on your work. If you're not a KVM developer, please read on nevertheless (or jump to END USER COLLABORATION). DATES / LOCATION Conference: August 9 - 10, 2010 Location: Renaissance Boston Waterfront in Boston, MA Abstracts due: May 14th, 2010 Notification: May 28th, 2010 Yes, we're colocated with LinuxCon. Tickets for the KVM Forum also count for LinuxCon. http://events.linuxfoundation.org/component/registrationpro/?func=details&d… PROCESS At first check if it's before May 14th. If you're past that date, you're out of luck. Now try to think hard and come up with a great idea that you could talk about. Once you have that set, we need you to write up a short abstract (~150 words) on it. In your submission please note how long your talk will take. Slots vary in length up to one hour. Also include in your proposal the proposal type -- one of: technical talk, breakout session, or end-user talk. Add that information to the abstract and submit it at the following URL: http://events.linuxfoundation.org/cfp/cfp-add Now, wait until May 24th. You will receive a notification on whether your talk was accepted or not. SCOPE OF TALKS We have a list of suggested presentation topics below. These suggestions are just for guidance, please feel free to submit a proposal on any of these or related topics. In general, the more it's about backend infrastructure, the better. KVM - Scaling and performance - Nested virtualization - I/O improvements - Driver domains - Time keeping - Memory management (page sharing, swapping, huge pages, etc) - Fault tolerance - VEPA, vswitch Embedded KVM - KVM on ARM, PPC, MIPS, ...? - Real-time requirements host/guest - Device pass-through w/o iommu - Custom device/platform models QEMU - Device model improvements - New devices - Security model - Scaling and performance - Desktop virtualization - Increasing robustness - Management interfaces - QMP protocol and implementation - Live migration Virtio - Speeding up existing devices - Vhost - Alternatives - Using virtio in non-kvm environments - Virtio on non-Linux Management infrastructure - Libvirt - Kvm autotest - Easy networking - Qemud BREAKOUT SESSION We will reserve some time each day to break out for working sessions. These sessions will be less formal than a presentation and more focused on developing a solution to some real development issue. If you are interested in getting developers together to hack on some code, submit your proposal and just make it clear it's a breakout session proposal. END-USER COLLABORATION One of the big challenges as developers is to know what, where and how people actually use our software. To solve this issue at least a little, there will be a few slots reserved for end users talking about their deployments, problems and achievements. So if you have a KVM based deployment running in production or are about to roll out one, please also submit a talk (see PROCESS), and simply mark it asn an end-user collaboration proposal. We would love to have an open discussion of fields where KVM/Qemu can still improve and you would have the unique chance to steer that process! Keep in mind that most of the Forum will be focused on development though, so we suggest you also come with a good portion of technical interest :-). And of course, no product marketing please! The purpose is to engage with KVM developers. LIGHTNING TALKS In addition to submitted talks we will also have some room for lightning talks. So if you have something you think might be done until the KVM Forum, but you're not sure you could fill 15 minutes with it. Or if you don't know if you'll make it until there, just keep in mind that you will still get the chance to talk about it. Lightning talk submissions and scheduling will be handled on-site at KVM Forum. Thank you for your interest in KVM. We're looking forward to your submissions and seeing you at the KVM Forum 2010 in August! Now, start thinking about that talk you want to give. Thanks, your KVM Forum 2010 Program Commitee Alexander Graf, Novell Anthony Liguori, IBM Avi Kivity, Red Hat Chris Wright, Red Hat Dor Laor, Red Hat Jan Kiszka, Siemens Please contact us with any questions or comments. KVM-Forum-2010-PC(a)redhat.com

1 0

[libvirt] [PATCH] qemu: Fix warning about a non-literal format string
by Matthias Bolte 07 May '10

07 May '10

--- I just pushed this one, as it qualifies as trivial compile fix. src/qemu/qemu_driver.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 92dc22d..bb1079e 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7968,7 +7968,7 @@ static int qemudDomainDetachSCSIDiskDevice(struct qemud_driver *driver, } if (!(qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) { - qemuReportError(VIR_ERR_OPERATION_FAILED, + qemuReportError(VIR_ERR_OPERATION_FAILED, "%s", _("Underlying qemu does not support SCSI disk removal")); goto cleanup; } -- 1.7.0.4

1 0

[libvirt] [PATCH] avoid link error in tests using libvirt_util; due to pthread_sigmask
by Jim Meyering 07 May '10

07 May '10

Without this patch, linking the test programs fails like this: /usr/bin/ld: ../src/.libs/libvirt_test.a(libvirt_util_la-util.o): undefined reference to symbol 'pthread_sigmask@@GLIBC_2.2.5' /usr/bin/ld: note: 'pthread_sigmask@@GLIBC_2.2.5' is defined in DSO /lib64/libpthread.so.0 so try adding it to the linker command line /lib64/libpthread.so.0: could not read symbols: Invalid operation collect2: ld returned 1 exit status make[3]: *** [nodeinfotest] Error 1 >From ae53113ddf09846cc01ec0f5e6e65a25991b1bfa Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering(a)redhat.com> Date: Fri, 7 May 2010 16:23:44 +0200 Subject: [PATCH] avoid link error in tests using libvirt_util; due to pthread_sigmask * src/Makefile.am (libvirt_util_la_LDFLAGS): Add $(LIB_PTHREAD), required, now that we're using gnulib's pthread module. 2010-05-07 Jim Meyering <meyering(a)redhat.com> --- src/Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index 7182da1..937ee84 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -378,7 +378,7 @@ libvirt_la_LIBADD = libvirt_util.la libvirt_util_la_SOURCES = \ $(UTIL_SOURCES) libvirt_util_la_CFLAGS = $(CAPNG_CFLAGS) $(YAJL_CFLAGS) -libvirt_util_la_LDFLAGS = $(CAPNG_LIBS) $(YAJL_LIBS) +libvirt_util_la_LDFLAGS = $(CAPNG_LIBS) $(YAJL_LIBS) $(LIB_PTHREAD) noinst_LTLIBRARIES += libvirt_conf.la -- 1.7.1.166.gf2086

3 4

[libvirt] [PATCH] Remove unused nwfilter field from struct remote_error
by Matthew Booth 07 May '10

07 May '10

Change 965466c1 added a new field to struct remote_error, which broke the RPC protocol. Fortunately the new field is unused, so this change simply removes it again. * src/remote/remote_protocol.(c|h|x): Remove remote_nwfilter from struct remote_error --- src/remote/remote_protocol.c | 2 -- src/remote/remote_protocol.h | 1 - src/remote/remote_protocol.x | 1 - 3 files changed, 0 insertions(+), 4 deletions(-) diff --git a/src/remote/remote_protocol.c b/src/remote/remote_protocol.c index 187281d..972bf52 100644 --- a/src/remote/remote_protocol.c +++ b/src/remote/remote_protocol.c @@ -227,8 +227,6 @@ xdr_remote_error (XDR *xdrs, remote_error *objp) return FALSE; if (!xdr_remote_network (xdrs, &objp->net)) return FALSE; - if (!xdr_remote_nwfilter (xdrs, &objp->nwfilter)) - return FALSE; return TRUE; } diff --git a/src/remote/remote_protocol.h b/src/remote/remote_protocol.h index 6f01da7..a600af6 100644 --- a/src/remote/remote_protocol.h +++ b/src/remote/remote_protocol.h @@ -143,7 +143,6 @@ struct remote_error { int int1; int int2; remote_network net; - remote_nwfilter nwfilter; }; typedef struct remote_error remote_error; diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x index 8000ee0..1ce488c 100644 --- a/src/remote/remote_protocol.x +++ b/src/remote/remote_protocol.x @@ -266,7 +266,6 @@ struct remote_error { int int1; int int2; remote_network net; - remote_nwfilter nwfilter; }; /* Authentication types available thus far.... */ -- 1.6.6.1

3 3

[libvirt] [TCK PATCH] block devices: allow specification of size for safety
by Eric Blake 07 May '10

07 May '10

I was getting failures of domain/103-blockdev-save-restore.t when connecting as qemu:///session, since my uid could stat /dev/sdb but not open it. That test now skips for unprivileged users, as well as adds a layer of sanity checking against expected size to avoid trashing the wrong device. * conf/default.cfg (host_block_devices): Document optional size. * lib/Sys/Virt/TCK.pm (get_host_block_device): If optional size is supplied, skip a device that does not match. Also, avoid devices that can't be opened. --- Go easy on me - I'm not that fluent in perl (yet); if there's a better way to do the sanity check, I'm all ears. conf/default.cfg | 8 ++++++++ lib/Sys/Virt/TCK.pm | 14 +++++++++++++- 2 files changed, 21 insertions(+), 1 deletions(-) diff --git a/conf/default.cfg b/conf/default.cfg index 01f438c..12c05b7 100644 --- a/conf/default.cfg +++ b/conf/default.cfg @@ -134,5 +134,13 @@ host_pci_devices = ( # the test suite itself needs to create partitions. # The disks should be at *least* 512 MB in size host_block_devices = ( +# Each block device is either a raw path # /dev/vdb +# or a path plus size in 1k blocks, as in /proc/partitions, to avoid +# trashing the wrong device +# { +# path = /dev/sdb +# size = 989184 +# } +# Can list more than on block device if many are available ) diff --git a/lib/Sys/Virt/TCK.pm b/lib/Sys/Virt/TCK.pm index 9cdef09..fc325a3 100644 --- a/lib/Sys/Virt/TCK.pm +++ b/lib/Sys/Virt/TCK.pm @@ -33,6 +33,7 @@ use IO::Uncompress::Gunzip qw(gunzip); use IO::Uncompress::Bunzip2 qw(bunzip2); use XML::XPath; use Carp qw(cluck carp); +use Fcntl qw(O_RDONLY SEEK_END); use Test::Builder; use Sub::Uplevel qw(uplevel); @@ -833,7 +834,18 @@ sub get_host_block_device { my $self = shift; my $devindex = @_ ? shift : 0; - return $self->config("host_block_devices/[$devindex]", undef); + my $device = $self->config("host_block_devices/[$devindex]/path", undef); + my $size = $self->config("host_block_devices/[$devindex]/size", 0); + + if (!defined $device) { + $device = $self->config("host_block_devices/[$devindex]", undef); + } + if ($size) { + sysopen(BLK, "$device", O_RDONLY) or return undef; + return undef unless sysseek(BLK, 0, SEEK_END) == $size * 1024; + close(BLK); + } + return $device; } 1; -- 1.6.6.1

5 21

[libvirt] [PATCH] Add support for NIC hotplug using netdev_add in QEMU
by Daniel P. Berrange 07 May '10

07 May '10

QEMU is gaining a new monitor command netdev_add for hotplugging NICs using the netdev backend code. We already support this on the command this, though it is disabled. This adds support for hotplug too, also to remain disabled until 0.13 QEMU is released * src/qemu/qemu_driver.c: Support netdev hotplug for NICs * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add support for netdev_add and netdev_remove commands --- src/qemu/qemu_driver.c | 58 +++++++++++--- src/qemu/qemu_monitor.c | 31 ++++++++ src/qemu/qemu_monitor.h | 6 ++ src/qemu/qemu_monitor_json.c | 175 ++++++++++++++++++++++++++++-------------- src/qemu/qemu_monitor_json.h | 6 ++ src/qemu/qemu_monitor_text.c | 58 ++++++++++++++ src/qemu/qemu_monitor_text.h | 6 ++ 7 files changed, 269 insertions(+), 71 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index b8a021d..d5a0c68 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7273,12 +7273,17 @@ static int qemudDomainAttachNetDevice(virConnectPtr conn, qemuDomainPCIAddressEnsureAddr(priv->pciaddrs, &net->info) < 0) goto cleanup; - vlan = qemuDomainNetVLAN(net); + if ((qemuCmdFlags & QEMUD_CMD_FLAG_NETDEV) && + (qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) { + vlan = -1; + } else { + vlan = qemuDomainNetVLAN(net); - if (vlan < 0) { - qemuReportError(VIR_ERR_NO_SUPPORT, "%s", - _("Unable to attach network devices without vlan")); - goto cleanup; + if (vlan < 0) { + qemuReportError(VIR_ERR_NO_SUPPORT, "%s", + _("Unable to attach network devices without vlan")); + goto cleanup; + } } if (tapfd != -1) { @@ -7306,9 +7311,17 @@ static int qemudDomainAttachNetDevice(virConnectPtr conn, } qemuDomainObjEnterMonitorWithDriver(driver, vm); - if (qemuMonitorAddHostNetwork(priv->mon, netstr) < 0) { - qemuDomainObjExitMonitorWithDriver(driver, vm); - goto try_tapfd_close; + if ((qemuCmdFlags & QEMUD_CMD_FLAG_NETDEV) && + (qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) { + if (qemuMonitorAddNetdev(priv->mon, netstr) < 0) { + qemuDomainObjExitMonitorWithDriver(driver, vm); + goto try_tapfd_close; + } + } else { + if (qemuMonitorAddHostNetwork(priv->mon, netstr) < 0) { + qemuDomainObjExitMonitorWithDriver(driver, vm); + goto try_tapfd_close; + } } qemuDomainObjExitMonitorWithDriver(driver, vm); @@ -7365,7 +7378,20 @@ cleanup: try_remove: if (vlan < 0) { - VIR_WARN0(_("Unable to remove network backend")); + if ((qemuCmdFlags & QEMUD_CMD_FLAG_NETDEV) && + (qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) { + char *netdev_name; + if (virAsprintf(&netdev_name, "host%s", net->info.alias) < 0) + goto no_memory; + qemuDomainObjEnterMonitorWithDriver(driver, vm); + if (qemuMonitorRemoveNetdev(priv->mon, netdev_name) < 0) + VIR_WARN(_("Failed to remove network backend for netdev %s"), + netdev_name); + qemuDomainObjExitMonitorWithDriver(driver, vm); + VIR_FREE(netdev_name); + } else { + VIR_WARN0(_("Unable to remove network backend")); + } } else { char *hostnet_name; if (virAsprintf(&hostnet_name, "host%s", net->info.alias) < 0) @@ -8197,9 +8223,17 @@ qemudDomainDetachNetDevice(struct qemud_driver *driver, } } - if (qemuMonitorRemoveHostNetwork(priv->mon, vlan, hostnet_name) < 0) { - qemuDomainObjExitMonitorWithDriver(driver, vm); - goto cleanup; + if ((qemuCmdFlags & QEMUD_CMD_FLAG_NETDEV) && + (qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE)) { + if (qemuMonitorRemoveNetdev(priv->mon, hostnet_name) < 0) { + qemuDomainObjExitMonitorWithDriver(driver, vm); + goto cleanup; + } + } else { + if (qemuMonitorRemoveHostNetwork(priv->mon, vlan, hostnet_name) < 0) { + qemuDomainObjExitMonitorWithDriver(driver, vm); + goto cleanup; + } } qemuDomainObjExitMonitorWithDriver(driver, vm); diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 5eb05d3..4a8ee9d 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -1437,6 +1437,37 @@ int qemuMonitorRemoveHostNetwork(qemuMonitorPtr mon, return ret; } + +int qemuMonitorAddNetdev(qemuMonitorPtr mon, + const char *netdevstr) +{ + int ret; + DEBUG("mon=%p, fd=%d netdevstr=%s", + mon, mon->fd, netdevstr); + + if (mon->json) + ret = qemuMonitorJSONAddNetdev(mon, netdevstr); + else + ret = qemuMonitorTextAddNetdev(mon, netdevstr); + return ret; +} + + +int qemuMonitorRemoveNetdev(qemuMonitorPtr mon, + const char *alias) +{ + int ret; + DEBUG("mon=%p, fd=%d alias=%s", + mon, mon->fd, alias); + + if (mon->json) + ret = qemuMonitorJSONRemoveNetdev(mon, alias); + else + ret = qemuMonitorTextRemoveNetdev(mon, alias); + return ret; +} + + int qemuMonitorGetPtyPaths(qemuMonitorPtr mon, virHashTablePtr paths) { diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index 4e3c4e8..0eeb563 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -325,6 +325,12 @@ int qemuMonitorRemoveHostNetwork(qemuMonitorPtr mon, int vlan, const char *netname); +int qemuMonitorAddNetdev(qemuMonitorPtr mon, + const char *netdevstr); + +int qemuMonitorRemoveNetdev(qemuMonitorPtr mon, + const char *alias); + int qemuMonitorGetPtyPaths(qemuMonitorPtr mon, virHashTablePtr paths); diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index 8249b99..79daaf3 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -457,6 +457,65 @@ error: } +static void +qemuFreeKeywords(int nkeywords, char **keywords, char **values) +{ + int i; + for (i = 0 ; i < nkeywords ; i++) { + VIR_FREE(keywords[i]); + VIR_FREE(values[i]); + } + VIR_FREE(keywords); + VIR_FREE(values); +} + +static virJSONValuePtr +qemuMonitorJSONKeywordStringToJSON(const char *str, const char *firstkeyword) +{ + virJSONValuePtr ret = NULL; + char **keywords = NULL; + char **values = NULL; + int nkeywords = 0; + int i; + + if (!(ret = virJSONValueNewObject())) + goto no_memory; + + nkeywords = qemuParseKeywords(str, &keywords, &values, 1); + + if (nkeywords < 0) + goto error; + + for (i = 0 ; i < nkeywords ; i++) { + if (values[i] == NULL) { + if (i != 0) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, + _("unexpected empty keyword in %s"), str); + goto error; + } else { + /* This 3rd arg isn't a typo - the way the parser works is + * that the value ended up in the keyword field */ + if (virJSONValueObjectAppendString(ret, firstkeyword, keywords[i]) < 0) + goto no_memory; + } + } else { + if (virJSONValueObjectAppendString(ret, keywords[i], values[i]) < 0) + goto no_memory; + } + } + + qemuFreeKeywords(nkeywords, keywords, values); + return ret; + +no_memory: + virReportOOMError(); +error: + qemuFreeKeywords(nkeywords, keywords, values); + virJSONValueFree(ret); + return NULL; +} + + static void qemuMonitorJSONHandleShutdown(qemuMonitorPtr mon, virJSONValuePtr data ATTRIBUTE_UNUSED) { qemuMonitorEmitShutdown(mon); @@ -1830,6 +1889,63 @@ int qemuMonitorJSONRemoveHostNetwork(qemuMonitorPtr mon, } +int qemuMonitorJSONAddNetdev(qemuMonitorPtr mon, + const char *netdevstr) +{ + int ret = -1; + virJSONValuePtr cmd = NULL; + virJSONValuePtr reply = NULL; + virJSONValuePtr args = NULL; + + cmd = qemuMonitorJSONMakeCommand("netdev_add", NULL); + if (!cmd) + return -1; + + args = qemuMonitorJSONKeywordStringToJSON(netdevstr, "type"); + if (!args) + goto cleanup; + + if (virJSONValueObjectAppend(cmd, "arguments", args) < 0) { + virReportOOMError(); + goto cleanup; + } + args = NULL; /* obj owns reference to args now */ + + ret = qemuMonitorJSONCommand(mon, cmd, &reply); + + if (ret == 0) + ret = qemuMonitorJSONCheckError(cmd, reply); + +cleanup: + virJSONValueFree(args); + virJSONValueFree(cmd); + virJSONValueFree(reply); + return ret; +} + + +int qemuMonitorJSONRemoveNetdev(qemuMonitorPtr mon, + const char *alias) +{ + int ret; + virJSONValuePtr cmd = qemuMonitorJSONMakeCommand("netdev_del", + "s:id", alias, + NULL); + virJSONValuePtr reply = NULL; + if (!cmd) + return -1; + + ret = qemuMonitorJSONCommand(mon, cmd, &reply); + + if (ret == 0) + ret = qemuMonitorJSONCheckError(cmd, reply); + + virJSONValueFree(cmd); + virJSONValueFree(reply); + return ret; +} + + /* * Example return data * @@ -2040,65 +2156,6 @@ int qemuMonitorJSONDelDevice(qemuMonitorPtr mon, } -static void -qemuFreeKeywords(int nkeywords, char **keywords, char **values) -{ - int i; - for (i = 0 ; i < nkeywords ; i++) { - VIR_FREE(keywords[i]); - VIR_FREE(values[i]); - } - VIR_FREE(keywords); - VIR_FREE(values); -} - -static virJSONValuePtr -qemuMonitorJSONKeywordStringToJSON(const char *str, const char *firstkeyword) -{ - virJSONValuePtr ret = NULL; - char **keywords = NULL; - char **values = NULL; - int nkeywords = 0; - int i; - - if (!(ret = virJSONValueNewObject())) - goto no_memory; - - nkeywords = qemuParseKeywords(str, &keywords, &values, 1); - - if (nkeywords < 0) - goto error; - - for (i = 0 ; i < nkeywords ; i++) { - if (values[i] == NULL) { - if (i != 0) { - qemuReportError(VIR_ERR_INTERNAL_ERROR, - _("unexpected empty keyword in %s"), str); - goto error; - } else { - /* This 3rd arg isn't a typo - the way the parser works is - * that the value ended up in the keyword field */ - if (virJSONValueObjectAppendString(ret, firstkeyword, keywords[i]) < 0) - goto no_memory; - } - } else { - if (virJSONValueObjectAppendString(ret, keywords[i], values[i]) < 0) - goto no_memory; - } - } - - qemuFreeKeywords(nkeywords, keywords, values); - return ret; - -no_memory: - virReportOOMError(); -error: - qemuFreeKeywords(nkeywords, keywords, values); - virJSONValueFree(ret); - return NULL; -} - - int qemuMonitorJSONAddDevice(qemuMonitorPtr mon, const char *devicestr) { diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h index 5cfbe6c..4dcb3e0 100644 --- a/src/qemu/qemu_monitor_json.h +++ b/src/qemu/qemu_monitor_json.h @@ -159,6 +159,12 @@ int qemuMonitorJSONRemoveHostNetwork(qemuMonitorPtr mon, int vlan, const char *netname); +int qemuMonitorJSONAddNetdev(qemuMonitorPtr mon, + const char *netdevstr); + +int qemuMonitorJSONRemoveNetdev(qemuMonitorPtr mon, + const char *alias); + int qemuMonitorJSONGetPtyPaths(qemuMonitorPtr mon, virHashTablePtr paths); diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c index 3f917bf..faa144d 100644 --- a/src/qemu/qemu_monitor_text.c +++ b/src/qemu/qemu_monitor_text.c @@ -1813,6 +1813,64 @@ cleanup: } +int qemuMonitorTextAddNetdev(qemuMonitorPtr mon, + const char *netdevstr) +{ + char *cmd; + char *reply = NULL; + int ret = -1; + + if (virAsprintf(&cmd, "netdev_add %s", netdevstr) < 0) { + virReportOOMError(); + return -1; + } + + if (qemuMonitorCommand(mon, cmd, &reply) < 0) { + qemuReportError(VIR_ERR_OPERATION_FAILED, + _("failed to add netdev with '%s'"), cmd); + goto cleanup; + } + + /* XXX error messages here ? */ + + ret = 0; + +cleanup: + VIR_FREE(cmd); + VIR_FREE(reply); + return ret; +} + + +int qemuMonitorTextRemoveNetdev(qemuMonitorPtr mon, + const char *alias) +{ + char *cmd; + char *reply = NULL; + int ret = -1; + + if (virAsprintf(&cmd, "netdev_del %s", alias) < 0) { + virReportOOMError(); + return -1; + } + + if (qemuMonitorCommand(mon, cmd, &reply) < 0) { + qemuReportError(VIR_ERR_OPERATION_FAILED, + _("failed to remove netdev in qemu with '%s'"), cmd); + goto cleanup; + } + + /* XXX error messages here ? */ + + ret = 0; + +cleanup: + VIR_FREE(cmd); + VIR_FREE(reply); + return ret; +} + + /* Parse the output of "info chardev" and return a hash of pty paths. * * Output is: diff --git a/src/qemu/qemu_monitor_text.h b/src/qemu/qemu_monitor_text.h index 23c3a45..25be828 100644 --- a/src/qemu/qemu_monitor_text.h +++ b/src/qemu/qemu_monitor_text.h @@ -154,6 +154,12 @@ int qemuMonitorTextRemoveHostNetwork(qemuMonitorPtr mon, int vlan, const char *netname); +int qemuMonitorTextAddNetdev(qemuMonitorPtr mon, + const char *netdevstr); + +int qemuMonitorTextRemoveNetdev(qemuMonitorPtr mon, + const char *alias); + int qemuMonitorTextGetPtyPaths(qemuMonitorPtr mon, virHashTablePtr paths); -- 1.6.6.1

2 1

[libvirt] [PATCH] Add env variable for debugging gnutls usage
by Daniel P. Berrange 07 May '10

07 May '10

Allow debugging of GNUTLS interactions by setting LIBVIRT_GNUTLS_DEBUG=10 LIBVIRT_DEBUG=1 virsh * src/remote/remote_driver.c: Use LIBVIRT_GNUTLS_DEBUG to enable gnutls debugging --- src/remote/remote_driver.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index 72cf292..9e90e5c 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -1138,16 +1138,29 @@ check_cert_file(const char *type, const char *file) } +static void remote_debug_gnutls_log(int level, const char* str) { + DEBUG("%d %s", level, str); +} + static int initialize_gnutls(void) { static int initialized = 0; int err; + char *gnudebug; if (initialized) return 0; gnutls_global_init (); + if ((gnudebug = getenv("LIBVIRT_GNUTLS_DEBUG")) != NULL) { + int val; + if (virStrToLong_i(gnudebug, NULL, 10, &val) < 0) + val = 10; + gnutls_global_set_log_level(val); + gnutls_global_set_log_function(remote_debug_gnutls_log); + } + /* X509 stuff */ err = gnutls_certificate_allocate_credentials (&x509_cred); if (err) { -- 1.6.6.1

2 1

[libvirt] [PATCH] cygwin: fix abort of virsh on my system
by Stefan Berger 07 May '10

07 May '10

This strange patch fixes aborts of virsh on my system. It seems that the string returned by xmlSaveUri is owned by the xml library?? Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index 317125f..a916b86 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -542,6 +542,9 @@ doRemoteOpen (virConnectPtr conn, } name = (char *) xmlSaveUri (&tmpuri); +#ifdef __CYGWIN__ + name = strdup(name); +#endif #ifdef HAVE_XMLURI_QUERY_RAW VIR_FREE(tmpuri.query_raw);

3 3

[libvirt] [PATCH] Fix SCSI disk unplugging
by Wolfgang Mauerer 06 May '10

06 May '10

Detaching disk devices is not only possible for VIR_DOMAIN_DISK_BUS_VIRTIO, but also for VIR_DOMAIN_DISK_BUS_SCSI, so take care of this possibility. Additionally, when the new-style device syntax is used, we do not need to check if the PCI address is valid since we don't need it to do the hot-unplugging. And while we're at it, drop the "pci" part in qemudDomainDetachPciDiskDevice() -- it's misleading since we do not necessarily have to deal with PCI addresses. Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer(a)siemens.com> --- src/qemu/qemu_driver.c | 16 +++++++++------- 1 files changed, 9 insertions(+), 7 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 704f824..f2b8517 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7862,10 +7862,10 @@ cleanup: } -static int qemudDomainDetachPciDiskDevice(struct qemud_driver *driver, - virDomainObjPtr vm, - virDomainDeviceDefPtr dev, - unsigned long long qemuCmdFlags) +static int qemudDomainDetachDiskDevice(struct qemud_driver *driver, + virDomainObjPtr vm, + virDomainDeviceDefPtr dev, + unsigned long long qemuCmdFlags) { int i, ret = -1; virDomainDiskDefPtr detach = NULL; @@ -7884,7 +7884,8 @@ static int qemudDomainDetachPciDiskDevice(struct qemud_driver *driver, goto cleanup; } - if (!virDomainDeviceAddressIsValid(&detach->info, + if (!(qemuCmdFlags & QEMUD_CMD_FLAG_DEVICE) && + !virDomainDeviceAddressIsValid(&detach->info, VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)) { qemuReportError(VIR_ERR_OPERATION_FAILED, "%s", _("device cannot be detached without a PCI address")); @@ -8373,8 +8374,9 @@ static int qemudDomainDetachDevice(virDomainPtr dom, if (dev->type == VIR_DOMAIN_DEVICE_DISK && dev->data.disk->device == VIR_DOMAIN_DISK_DEVICE_DISK && - dev->data.disk->bus == VIR_DOMAIN_DISK_BUS_VIRTIO) { - ret = qemudDomainDetachPciDiskDevice(driver, vm, dev, qemuCmdFlags); + (dev->data.disk->bus == VIR_DOMAIN_DISK_BUS_VIRTIO || + dev->data.disk->bus == VIR_DOMAIN_DISK_BUS_SCSI)) { + ret = qemudDomainDetachDiskDevice(driver, vm, dev, qemuCmdFlags); } else if (dev->type == VIR_DOMAIN_DEVICE_NET) { ret = qemudDomainDetachNetDevice(driver, vm, dev, qemuCmdFlags); } else if (dev->type == VIR_DOMAIN_DEVICE_CONTROLLER) { -- 1.6.4

3 7

[libvirt] [PATCHv2 0/5] build: update gnulib
by Eric Blake 06 May '10

06 May '10

This replaces the first cut at this series: https://www.redhat.com/archives/libvir-list/2010-April/msg01341.html Changes since v1: squash the original 1/5 and 2/5 into one patch test every stage of the series on a cross-compile to mingw add new 5/5, and adjust to recent syntax checks available in today's gnulib [PATCHv2 1/5] build: rely on gnulib's pthread module [PATCHv2 2/5] build: use gnulib's uname [PATCHv2 3/5] build: use gnulib's sys/wait.h [PATCHv2 4/5] build: drop more redundant configure checks [PATCHv2 5/5] build: update gnulib Because of the new patch, I'll wait for a re-ACK before pushing; but 1 through 4 are pretty much unchanged from their original ACK. .gnulib | 2 +- .x-sc_prohibit_always_true_header_tests | 4 ++++ bootstrap.conf | 3 +++ configure.ac | 22 ++++------------------ src/libvirt.c | 4 +--- src/network/bridge_driver.c | 1 - src/nodeinfo.c | 12 ++---------- src/openvz/openvz_conf.c | 2 +- src/openvz/openvz_driver.c | 2 +- src/phyp/phyp_driver.c | 1 - src/qemu/qemu_driver.c | 1 - src/remote/remote_driver.c | 5 +---- src/storage/storage_backend.c | 4 +--- src/uml/uml_driver.c | 1 - src/util/ebtables.c | 7 ++----- src/util/hooks.c | 4 +--- src/util/iptables.c | 7 ++----- src/util/processinfo.c | 6 ++---- src/util/util.c | 4 +--- 19 files changed, 27 insertions(+), 65 deletions(-)

2 10

Re: [libvirt] [PATCH] cygwin: fix abort of virsh on my system
by Stefan Berger 06 May '10

06 May '10

Stefan Berger/Watson/IBM wrote on 05/06/2010 02:55:31 PM: > Chris Lalancette <clalance(a)redhat.com> wrote on 05/06/2010 02:28:18 PM: > > > > On 05/06/2010 02:11 PM, Stefan Berger wrote: > > > This strange patch fixes aborts of virsh on my system. It seems that the > > > string returned by xmlSaveUri is owned by the xml library?? > > > [...] > > > > > So something else might be going on. What version of libxml2 > > are you currently building against? > > Cygwin picks up what I have installed in /cydrive/c/GTK/ and there I > have version 2.6.32. > > xmlversion.h:#define LIBXML_DOTTED_VERSION "2.6.32" > > The abort occurs upon the VIR_FREE(name). That was also the problem. Since the includes weren't missing I didn't have cygwin's libvirt-devel package installed and so it took the wrong includes... Stefan

1 0

[libvirt] [PATCH] cgroup: Enable memory.use_hierarchy of cgroup for domain
by Ryota Ozaki 06 May '10

06 May '10

Through conversation with Kumar L Srikanth-B22348, I found that the function of getting memory usage (e.g., virsh dominfo) doesn't work for lxc with ns subsystem of cgroup enabled. This is because of features of ns and memory subsystems. Ns creates child cgroup on every process fork and as a result processes in a container are not assigned in a cgroup for domain (e.g., libvirt/lxc/test1/). For example, libvirt_lxc and init (or somewhat specified in XML) are assigned into libvirt/lxc/test1/8839/ and libvirt/lxc/test1/8839/8849/, respectively. On the other hand, memory subsystem accounts memory usage within a group of processes by default, i.e., it does not take any child (and descendent) groups into account. With the two features, virsh dominfo which just checks memory usage of a cgroup for domain always returns zero because the cgroup has no process. Setting memory.use_hierarchy of a group allows to account (and limit) memory usage of every descendent groups of the group. By setting it of a cgroup for domain, we can get proper memory usage of lxc with ns subsystem enabled. (To be exact, the setting is required only when memory and ns subsystems are enabled at the same time, e.g., mount -t cgroup none /cgroup.) --- src/util/cgroup.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++--- 1 files changed, 59 insertions(+), 4 deletions(-) diff --git a/src/util/cgroup.c b/src/util/cgroup.c index b8b2eb5..f7d6b41 100644 --- a/src/util/cgroup.c +++ b/src/util/cgroup.c @@ -443,7 +443,38 @@ static int virCgroupCpuSetInherit(virCgroupPtr parent, virCgroupPtr group) return rc; } -static int virCgroupMakeGroup(virCgroupPtr parent, virCgroupPtr group, int create) +static int virCgroupSetMemoryUseHierarchy(virCgroupPtr group) +{ + int rc = 0; + unsigned long long value; + const char *filename = "memory.use_hierarchy"; + + rc = virCgroupGetValueU64(group, + VIR_CGROUP_CONTROLLER_MEMORY, + filename, &value); + if (rc != 0) { + VIR_ERROR("Failed to read %s/%s (%d)", group->path, filename, rc); + return rc; + } + + /* Setting twice causes error, so if already enabled, skip setting */ + if (value == 1) + return 0; + + VIR_DEBUG("Setting up %s/%s", group->path, filename); + rc = virCgroupSetValueU64(group, + VIR_CGROUP_CONTROLLER_MEMORY, + filename, 1); + + if (rc != 0) { + VIR_ERROR("Failed to set %s/%s (%d)", group->path, filename, rc); + } + + return rc; +} + +static int virCgroupMakeGroup(virCgroupPtr parent, virCgroupPtr group, + int create, int memory_hierarchy) { int i; int rc = 0; @@ -477,6 +508,20 @@ static int virCgroupMakeGroup(virCgroupPtr parent, virCgroupPtr group, int creat break; } } + /* + * Note that virCgroupSetMemoryUseHierarchy should always be + * called prior to creating subcgroups and attaching tasks. + */ + if (memory_hierarchy && + group->controllers[VIR_CGROUP_CONTROLLER_MEMORY].mountPoint != NULL && + (i == VIR_CGROUP_CONTROLLER_MEMORY || + STREQ(group->controllers[i].mountPoint, group->controllers[VIR_CGROUP_CONTROLLER_MEMORY].mountPoint))) { + rc = virCgroupSetMemoryUseHierarchy(group); + if (rc != 0) { + VIR_FREE(path); + break; + } + } } VIR_FREE(path); @@ -553,7 +598,7 @@ static int virCgroupAppRoot(int privileged, if (rc != 0) goto cleanup; - rc = virCgroupMakeGroup(rootgrp, *group, create); + rc = virCgroupMakeGroup(rootgrp, *group, create, 0); cleanup: virCgroupFree(&rootgrp); @@ -653,7 +698,7 @@ int virCgroupForDriver(const char *name, VIR_FREE(path); if (rc == 0) { - rc = virCgroupMakeGroup(rootgrp, *group, create); + rc = virCgroupMakeGroup(rootgrp, *group, create, 0); if (rc != 0) virCgroupFree(group); } @@ -703,7 +748,17 @@ int virCgroupForDomain(virCgroupPtr driver, VIR_FREE(path); if (rc == 0) { - rc = virCgroupMakeGroup(driver, *group, create); + /* + * Create a cgroup with memory.use_hierarchy enabled to + * surely account memory usage of lxc with ns subsystem + * enabled. (To be exact, memory and ns subsystems are + * enabled at the same time.) + * + * The reason why doing it here, not a upper group, say + * a group for driver, is to avoid overhead to track + * cumulative usage that we don't need. + */ + rc = virCgroupMakeGroup(driver, *group, create, 1); if (rc != 0) virCgroupFree(group); } -- 1.6.5.2

1 0

[libvirt] [PATCH] cgroup: Enable memory.use_hierarchy of cgroup for domain
by Ryota Ozaki 06 May '10

06 May '10

Through conversation with Kumar L Srikanth-B22348, I found that the function of getting memory usage (e.g., virsh dominfo) doesn't work for lxc with ns subsystem of cgroup enabled. This is because of features of ns and memory subsystems. Ns creates child cgroup on every process fork and as a result processes in a container are not assigned in a cgroup for domain (e.g., libvirt/lxc/test1/). For example, libvirt_lxc and init (or somewhat specified in XML) are assigned into libvirt/lxc/test1/8839/ and libvirt/lxc/test1/8839/8849/, respectively. On the other hand, memory subsystem accounts memory usage within a group of processes by default, i.e., it does not take any child (and descendent) groups into account. With the two features, virsh dominfo which just checks memory usage of a cgroup for domain always returns zero because the cgroup has no process. Setting memory.use_hierarchy of a group allows to account (and limit) memory usage of every descendent groups of the group. By setting it of a cgroup for domain, we can get proper memory usage of lxc with ns subsystem enabled. (To be exact, the setting is required only when memory and ns subsystems are enabled at the same time, e.g., mount -t cgroup none /cgroup.) --- src/util/cgroup.c | 49 +++++++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 45 insertions(+), 4 deletions(-) diff --git a/src/util/cgroup.c b/src/util/cgroup.c index b8b2eb5..93cd6a9 100644 --- a/src/util/cgroup.c +++ b/src/util/cgroup.c @@ -443,7 +443,38 @@ static int virCgroupCpuSetInherit(virCgroupPtr parent, virCgroupPtr group) return rc; } -static int virCgroupMakeGroup(virCgroupPtr parent, virCgroupPtr group, int create) +static int virCgroupSetMemoryUseHierarchy(virCgroupPtr group) +{ + int rc = 0; + unsigned long long value; + const char *filename = "memory.use_hierarchy"; + + rc = virCgroupGetValueU64(group, + VIR_CGROUP_CONTROLLER_MEMORY, + filename, &value); + if (rc != 0) { + VIR_ERROR("Failed to read %s/%s (%d)", group->path, filename, rc); + return rc; + } + + /* Setting twice causes error, so if already enabled, skip setting */ + if (value == 1) + return 0; + + VIR_DEBUG("Setting up %s/%s", group->path, filename); + rc = virCgroupSetValueU64(group, + VIR_CGROUP_CONTROLLER_MEMORY, + filename, 1); + + if (rc != 0) { + VIR_ERROR("Failed to set %s/%s (%d)", group->path, filename, rc); + } + + return rc; +} + +static int virCgroupMakeGroup(virCgroupPtr parent, virCgroupPtr group, + int create, int memory_hierarchy) { int i; int rc = 0; @@ -477,6 +508,16 @@ static int virCgroupMakeGroup(virCgroupPtr parent, virCgroupPtr group, int creat break; } } + if (memory_hierarchy && + group->controllers[VIR_CGROUP_CONTROLLER_MEMORY].mountPoint != NULL && + (i == VIR_CGROUP_CONTROLLER_MEMORY || + STREQ(group->controllers[i].mountPoint, group->controllers[VIR_CGROUP_CONTROLLER_MEMORY].mountPoint))) { + rc = virCgroupSetMemoryUseHierarchy(group); + if (rc != 0) { + VIR_FREE(path); + break; + } + } } VIR_FREE(path); @@ -553,7 +594,7 @@ static int virCgroupAppRoot(int privileged, if (rc != 0) goto cleanup; - rc = virCgroupMakeGroup(rootgrp, *group, create); + rc = virCgroupMakeGroup(rootgrp, *group, create, 0); cleanup: virCgroupFree(&rootgrp); @@ -653,7 +694,7 @@ int virCgroupForDriver(const char *name, VIR_FREE(path); if (rc == 0) { - rc = virCgroupMakeGroup(rootgrp, *group, create); + rc = virCgroupMakeGroup(rootgrp, *group, create, 0); if (rc != 0) virCgroupFree(group); } @@ -703,7 +744,7 @@ int virCgroupForDomain(virCgroupPtr driver, VIR_FREE(path); if (rc == 0) { - rc = virCgroupMakeGroup(driver, *group, create); + rc = virCgroupMakeGroup(driver, *group, create, 1); if (rc != 0) virCgroupFree(group); } -- 1.6.5.2

3 3

[libvirt] [PATCH] util: fix va_start usage bug
by Eric Blake 06 May '10

06 May '10

Detected by clang. POSIX requires that the second argument to va_start be the name of the last variable; and in some implementations, passing *path instead of path would dereference bogus memory instead of pulling arguments off the stack. * src/util/util.c (virBuildPathInternal): Use correct argument to va_start. --- I think this falls under the trivial rule, as it silences a compiler warning and is a one-line fix of a real bug, so I pushed it. src/util/util.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/util/util.c b/src/util/util.c index 2d32952..c44d012 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -2799,7 +2799,7 @@ int virBuildPathInternal(char **path, ...) va_list ap; int ret = 0; - va_start(ap, *path); + va_start(ap, path); path_component = va_arg(ap, char *); virBufferAdd(&buf, path_component, -1); -- 1.6.6.1

2 1

[libvirt] Libvirtd in listen mode.
by Kumar L Srikanth-B22348 06 May '10

06 May '10

Hi, If I start the libvirtd service using the command "service libvirtd start", it is not starting in listen mode. I am stopping the libvirtd service, and then starting in listen mode externally, using the following command: "libvirtd -listen". But, how can I start libvirtd service in listen mode by default (when I issue the command "service libvirtd start")? Regards, Srikanth.

2 1

[libvirt] [PATCH] build: silence a clang false positive
by Eric Blake 05 May '10

05 May '10

* src/qemu/qemu_monitor.c (qemuMonitorIOWriteWithFD): Work around recent clang shortcoming in analysis. --- False positive encountered with the latest F-13 clang :( src/qemu/qemu_monitor.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 443d216..abf1338 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -1,7 +1,7 @@ /* * qemu_monitor.c: interaction with QEMU monitor console * - * Copyright (C) 2006-2009 Red Hat, Inc. + * Copyright (C) 2006-2010 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -374,6 +374,9 @@ qemuMonitorIOWriteWithFD(qemuMonitorPtr mon, msg.msg_controllen = sizeof(control); cmsg = CMSG_FIRSTHDR(&msg); + /* Some static analyzers, like clang 2.6-0.6.pre2, fail to see + that our use of CMSG_FIRSTHDR will not return NULL. */ + sa_assert(cmsg); cmsg->cmsg_len = CMSG_LEN(sizeof(int)); cmsg->cmsg_level = SOL_SOCKET; cmsg->cmsg_type = SCM_RIGHTS; -- 1.6.6.1

2 2

[libvirt] [PATCH] cgroup: Change virCgroupRemove to remove all child groups at first
by Ryota Ozaki 05 May '10

05 May '10

As same as normal directories, a cgroup cannot be removed if it contains sub groups. This patch changes virCgroupRemove to remove all child groups (subdirectories) of a target group before removing the target group. The handling is required when we run lxc with ns subsystem of cgroup. Ns subsystem automatically creates child cgroups on every process forks, but unfortunately the groups are not removed on process exits, so we have to remove them by ourselves. With this patch, such child groups are surely removed at lxc shutdown, i.e., lxcVmCleanup which calls virCgroupRemove. --- src/util/cgroup.c | 48 ++++++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 44 insertions(+), 4 deletions(-) diff --git a/src/util/cgroup.c b/src/util/cgroup.c index b8b2eb5..531c131 100644 --- a/src/util/cgroup.c +++ b/src/util/cgroup.c @@ -23,6 +23,7 @@ #include <sys/stat.h> #include <sys/types.h> #include <libgen.h> +#include <dirent.h> #include "internal.h" #include "util.h" @@ -561,11 +562,52 @@ cleanup: } #endif +static int virCgroupRemoveRecursively(char *grppath) +{ + DIR *grpdir; + struct dirent *ent; + int rc = 0; + + grpdir = opendir(grppath); + if (grpdir == NULL) { + VIR_ERROR("Unable to open %s (%d)", grppath, errno); + rc = -errno; + return rc; + } + + while ((ent = readdir(grpdir)) != NULL) { + char path[PATH_MAX]; + int ret; + + if (ent->d_name[0] == '.') continue; + if (ent->d_type != DT_DIR) continue; + + ret = snprintf(path, sizeof(path), "%s/%s", grppath, ent->d_name); + if (ret < 0) + break; + rc = virCgroupRemoveRecursively(path); + if (rc != 0) + break; + } + DEBUG("Removing cgroup %s", grppath); + if (rmdir(grppath) != 0 && errno != ENOENT) { + rc = -errno; + VIR_ERROR("Unable to remove %s (%d)", grppath, errno); + } + + return rc; +} + /** * virCgroupRemove: * * @group: The group to be removed * + * It first removes all child groups recursively + * in depth first order and then removes @group + * because the presence of the child groups + * prevents removing @group. + * * Returns: 0 on success */ int virCgroupRemove(virCgroupPtr group) @@ -585,10 +627,8 @@ int virCgroupRemove(virCgroupPtr group) &grppath) != 0) continue; - DEBUG("Removing cgroup %s", grppath); - if (rmdir(grppath) != 0 && errno != ENOENT) { - rc = -errno; - } + DEBUG("Removing cgroup %s and all child cgroups", grppath); + rc = virCgroupRemoveRecursively(grppath); VIR_FREE(grppath); } -- 1.6.5.2

1 0

[libvirt] [PATCH v2] rpmbuild: add ebtables & ip(6)tables dependency for rpm
by Stefan Berger 05 May '10

05 May '10

Add ebtables,iptables & iptables-ipv6 dependency to rpm. Changes from V1 to V2: -passing --without-libpcap to configure script, if libpcap is not to be used Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> --- libvirt.spec.in | 7 +++++++ 1 file changed, 7 insertions(+) Index: libvirt-acl/libvirt.spec.in =================================================================== --- libvirt-acl.orig/libvirt.spec.in +++ libvirt-acl/libvirt.spec.in @@ -61,6 +61,7 @@ %define with_udev 0%{!?_without_udev:0} %define with_hal 0%{!?_without_hal:0} %define with_yajl 0%{!?_without_yajl:0} +%define with_nwfilter 0%{!?_without_nwfilter:0} %define with_libpcap 0%{!?_without_libpcap:0} # Non-server/HV driver defaults which are always enabled @@ -150,6 +151,7 @@ # Enable libpcap library %if %{with_qemu} +%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}} %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}} %endif @@ -195,6 +197,11 @@ Requires: bridge-utils Requires: dnsmasq Requires: iptables %endif +%if %{with_nwfilter} +Requires: ebtables +Requires: iptables +Requires: iptables-ipv6 +%endif # needed for device enumeration %if %{with_hal} Requires: hal @@ -517,6 +524,10 @@ of recent versions of Linux (and other O %define _without_yajl --without-yajl %endif +%if ! %{with_libpcap} +%define _without_libpcap --without-libpcap +%endif + %configure %{?_without_xen} \ %{?_without_qemu} \ %{?_without_openvz} \ @@ -545,6 +556,7 @@ of recent versions of Linux (and other O %{?_without_hal} \ %{?_without_udev} \ %{?_without_yajl} \ + %{?_without_libpcap} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-init-script=redhat \

2 2

[libvirt] [PATCH] rpmbuild: add ebtables & ip(6)tables dependency for rpm
by Stefan Berger 05 May '10

05 May '10

Add ebtables,iptables & iptables-ipv6 dependency to rpm. Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> --- libvirt.spec.in | 7 +++++++ 1 file changed, 7 insertions(+) Index: libvirt-acl/libvirt.spec.in =================================================================== --- libvirt-acl.orig/libvirt.spec.in +++ libvirt-acl/libvirt.spec.in @@ -61,6 +61,7 @@ %define with_udev 0%{!?_without_udev:0} %define with_hal 0%{!?_without_hal:0} %define with_yajl 0%{!?_without_yajl:0} +%define with_nwfilter 0%{!?_without_nwfilter:0} %define with_libpcap 0%{!?_without_libpcap:0} # Non-server/HV driver defaults which are always enabled @@ -150,6 +151,7 @@ # Enable libpcap library %if %{with_qemu} +%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}} %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}} %endif @@ -195,6 +197,11 @@ Requires: bridge-utils Requires: dnsmasq Requires: iptables %endif +%if %{with_nwfilter} +Requires: ebtables +Requires: iptables +Requires: iptables-ipv6 +%endif # needed for device enumeration %if %{with_hal} Requires: hal

3 3

[libvirt] libvirt with qemu-kvm, not recognizing NIC model
by Jonathan Hoover 05 May '10

05 May '10

Is this the right list for this question, or should I be elsewhere? I am trying to specify a network card "model type" of "pcnet" (to emulate vmware esxi's network card). No matter what I put for model type in my xml config file, it comes up as an Intel e1000. I ran "qemu-kvm -net nic,model=? /dev/null" and I got back a list of supported models including pcnet,e1000,virtio, and others as expected. No matter which I put in my xml file for /etc/libvirt/qemu/Symantec-bg.xml (a Symantec Brightmail Gateway virtual machine), I just get back that its an Intel card on boot (which doesn't work with Symantec BG). I am running Fedora 12, kernel is 2.6.31.6-166.fc12.x86_64. The version of libvirt is 0.7.1. I am running it on an Intel Core 2 Quad CPU Q8400 @ 2.66 GHz. I have the same problem under Fedora 13 Beta. Thoughts? Jonathan Hoover

2 2

[libvirt] Alternative to XML Creation and Parsing?
by Ganesh Pagade 05 May '10

05 May '10

Hello, We plan to develop a fancy GUI which would help creating and managing VMs/Domains for RHEL 5.4 KVM. However looking at the schemas provided in docs/schemas/ (Ex: domain.rng) generating the XML file from the inputs taken from the GUI and pass it on to virDomainDefineXML() turns out to be a huge tasks in itself. I was wondering if there is an better way for me to provide my configurations to the library and also to read data from it (instead of creating, parsing XMLs)? If an alternate approach exist, are there any limitations with it? Also the schema given in docs/schemas/ would be generic for all hyper visor. How can I identify the tags applicable only for a particular hyper visor? I found: virConnectDomainXMLFromNative(virConnectPtr conn, const char * nativeFormat, const char * nativeConfig, unsigned int flags) in API reference, which could solve my first problem but couldn't figure out what nativeFormat would be. Any inputs/pointers would be highly appreciated. Regards, Ganesh

2 2

[libvirt] Fwd: Re: need your help about virito vmchannel
by Matthew Booth 04 May '10

04 May '10

FYI for the list. I haven't looked at this yet. Matt -------- Original Message -------- Subject: Re: need your help about virito vmchannel Date: Tue, 4 May 2010 18:00:02 +0530 From: Amit Shah <amit.shah(a)redhat.com> To: Matthew Booth <mbooth(a)redhat.com> CC: Jianlin Liu <jialiu(a)redhat.com> On (Tue) May 04 2010 [13:18:30], Matthew Booth wrote: > On 04/05/10 12:48, Jianlin Liu wrote: > > Hi Matthew, > > > > I want to create a virtio vm channel in my guest. So I add the followiong to my guest xml file: > > <channel type='pty'> > > <target type='virtio' name='org.linux-kvm.port.0'/> > > </channel> > > Jianlin, > > While I wrote the libvirt->vmchannel glue, I'm not actually that > familiar with vmchannel itself. I've cc'd Amit, who hopefully might > recognise this problem and tell me how to fix it ;) > > Amit, > > Any idea what's going on here? Yes: > > Then I try to start the guest: > > # virsh start winxp > > error: Failed to start domain winxp > > error: internal error Process exited while reading console log output: char device redirected to /dev/pts/4 > > char device redirected to /dev/pts/5 > > qemu-kvm: -device virtio-serial-pci,id=virtio-serial0,max_ports=0,vectors=0,bus=pci.0,addr=0x5: Device 'virtio-serial-pci' could not be initialized With max_ports=0, the virtio-serial device doesn't get created and hence this error. Amit

3 3

[libvirt] [PATCH] configure.ac: Avoid uname, which breaks cross-compilation
by Matthias Bolte 04 May '10

04 May '10

When cross-compiling on Linux, configure will misdetect the target as Linux because it uses uname instead of relying on the $host variable. This results in including libvirt_linux.syms into libvirt.syms and therefore trying to export undefined symbols. Replace uname checks with $host checks to fix this. --- configure.ac | 18 ++++++++++++++---- 1 files changed, 14 insertions(+), 4 deletions(-) diff --git a/configure.ac b/configure.ac index 6ee5b90..5d68dcc 100644 --- a/configure.ac +++ b/configure.ac @@ -210,8 +210,11 @@ if test "$prefix" = "/usr" && test "$sysconfdir" = '${prefix}/etc' ; then fi dnl lxc and qemu drivers require linux headers -if test `uname -s` != "Linux" -then +case "$host" in + *-*-linux*) + # match linux here so the *) case will match anything non-linux + ;; + *) if test "x$with_lxc" != "xyes" then with_lxc=no @@ -220,7 +223,8 @@ then then with_qemu=no fi -fi + ;; +esac dnl Allow to build without Xen, QEMU/KVM, test or remote driver AC_ARG_WITH([xen], @@ -1983,7 +1987,13 @@ then fi AM_CONDITIONAL([WITH_NODE_DEVICES], [test "$with_nodedev" = "yes"]) -AM_CONDITIONAL([WITH_LINUX], [test `uname -s` = "Linux"]) +with_linux=no +case "$host" in + *-*-linux*) + with_linux=yes + ;; +esac +AM_CONDITIONAL([WITH_LINUX], [test "$with_linux" = "yes"]) AC_ARG_WITH([qemu-user], -- 1.7.0.4

3 3

[libvirt] [PATCH] Don't wipe generated iface target in active domains
by jdenemar＠redhat.com 04 May '10

04 May '10

From: Jiri Denemark <jdenemar(a)redhat.com> Wipe generated interface target only when reading configuration of inactive domains. --- src/conf/domain_conf.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 546ddf2..3e45f79 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -1889,7 +1889,8 @@ virDomainNetDefParseXML(virCapsPtr caps, xmlStrEqual(cur->name, BAD_CAST "target")) { ifname = virXMLPropString(cur, "dev"); if ((ifname != NULL) && - ((STRPREFIX((const char*)ifname, "vnet")) || + (((flags & VIR_DOMAIN_XML_INACTIVE) && + (STRPREFIX((const char*)ifname, "vnet"))) || (!isValidIfname(ifname)))) { /* An auto-generated target name, blank it out */ /* blank out invalid interface names */ -- 1.7.1

3 2

[libvirt] [PATCH] Various fixes for the spec file
by Daniel Veillard 04 May '10

04 May '10

This includes various things: - fix the Requires: libvirt-client to use %{name} to allow easy renaming - when building ESX support one need libcurl-devel - remove Makefile[.in] from xml/nwfilter in the docs, as this breaks parallel install ation of i686 and x86_64 packages - don't include nwfilter config files if not building with the daemon all relatively trivial which is why I packed them together, Daniel diff --git a/libvirt.spec.in b/libvirt.spec.in index 47e3050..9045c9a 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -184,7 +184,7 @@ URL: http://libvirt.org/ BuildRequires: python-devel # The client side, i.e. shared libs and virsh are in a subpackage -Requires: libvirt-client = %{version}-%{release} +Requires: %{name}-client = %{version}-%{release} # Used by many of the drivers, so turn it on whenever the # daemon is present @@ -347,6 +347,9 @@ BuildRequires: libssh2-devel %if %{with_netcf} BuildRequires: netcf-devel >= 0.1.4 %endif +%if %{with_esx} +BuildRequires: libcurl-devel +%endif # Fedora build root suckage BuildRequires: gawk @@ -378,7 +381,7 @@ virtualization capabilities of recent versions of Linux (and other OSes). %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Group: Development/Libraries -Requires: libvirt-client = %{version}-%{release} +Requires: %{name}-client = %{version}-%{release} Requires: pkgconfig %if %{with_xen} Requires: xen-devel @@ -392,7 +395,7 @@ the virtualization capabilities of recent versions of Linux (and other OSes). %package python Summary: Python bindings for the libvirt library Group: Development/Libraries -Requires: libvirt-client = %{version}-%{release} +Requires: %{name}-client = %{version}-%{release} %description python The libvirt-python package contains a module that permits applications @@ -556,7 +559,7 @@ gzip -9 ChangeLog rm -fr %{buildroot} %makeinstall -for i in domain-events/events-c dominfo domsuspend hellolibvirt python +for i in domain-events/events-c dominfo domsuspend hellolibvirt python xml/nwfilter do (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in) done @@ -600,6 +603,10 @@ rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version} rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} %endif +%if ! %{with_libvirtd} +rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter +%endif + %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

2 1

[libvirt] why we should use a mechanical indentation checker
by Jim Meyering 04 May '10

04 May '10

I introduced a bug with this supposedly-safe, no-semantic-change delta: http://libvirt.org/git/?p=libvirt.git;a=commitdiff;h=b6719eab9e95c5daeeea85 See if you can spot it. Here is the loop in question, as it was prior to my erroneous change: for (i = 0; i < nruleInstances; i++) switch (inst[i]->ruleType) { case RT_EBTABLES: ebiptablesInstCommand(&buf, inst[i]->commandTemplate, 'A', -1, 1); break; case RT_IPTABLES: haveIptables = true; break; case RT_IP6TABLES: haveIp6tables = true; break; } Its formatting is WRONG. Sure, it is technically correct to omit the curly braces when the for-loop body is a single *statement*, as it is above. However, the moment the construct in the body occupies more than one line, it is very risky to omit the curly braces. I demonstrated that yesterday by inserting a no-op sa_assert statement as the "first" line of that loop body, not noticing that unlike my other two additions, this one pushed the single-stmt body *out of the loop*. Nasty. For example, do not omit the curly braces even when the body is just a single-line statement but with a preceding comment. while (true) /* explanation... */ BAD! single_line_stmt (); while (true) { /* Always put braces around a multi-line body. */ /* explanation... */ single_line_stmt (); } Of course do not do this, either: if (expr) while (other_expr) { BAD! ... } Do this, instead: if (expr) { while (other_expr) { ... } } I am adding something like the following to coreutils' HACKING, and will add the equivalent (adjusting indentation/brace-positioning style in the examples) to libvirt's hacking.html.in, so if you object, speak up soon. While writing the above and below, I noticed that with the GNU formatting style, this is less of a problem, since there you do not add those oh-so-important-to-semantics curly braces at the *end* of a line where it easy to miss them, but at the beginning. In addition, with the GNU style, adding the opening curly brace changes the indentation level of the body, while in libvirt's style, it does not. In either case, an automatic indentation checker would catch the problem. This is yet another reason to enforce an indentation style. The longer we wait, the harder it will become. Note: these diffs are relative to coreutils' HACKING file, not libvirt's: diff --git a/HACKING b/HACKING index 124c666..4a6d593 100644 --- a/HACKING +++ b/HACKING @@ -233,6 +233,110 @@ Try to make the summary line fit one of the following forms: maint: change-description +Curly braces: use judiciously +============================= +Omit the curly braces around an "if", "while", "for" etc. body only when +that body occupies a single line. In every other case we require the braces. +This ensures that it is trivially easy to identify a single-*statement* loop: +each has only one *line* in its body. + +For example, do not omit the curly braces even when the body is just a +single-line statement but with a preceding comment. + +Omitting braces with a single-line body is fine: + + while (expr) + single_line_stmt (); + +However, the moment your loop body extends onto a second line, for +whatever reason (even if it's just an added comment), then you should +add braces. Otherwise, it would be too easy to insert a statement just +before that comment (without adding braces), thinking it is already a +multi-statement loop: + + while (true) + /* comment... */ // BAD: multi-line body without braces + single_line_stmt (); + +Do this instead: + + while (true) + { /* Always put braces around a multi-line body. */ + /* explanation... */ + single_line_stmt (); + } + +There is one exception: when the second body line is not +at the same indentation level as the first body line. + + if (expr) + error (0, 0, _("a diagnostic that would make this line" + " extend past the 80-column limit")); + +It seems safe not to require curly braces in this case, +since the further-indented second body line makes it obvious +that this is still a single-statement body. + +To reiterate, don't do this: + + if (expr) + while (expr_2) // BAD: multi-line body without braces + { + ... + } + +Do this, instead: + + if (expr) + { + while (expr_2) + { + ... + } + } + +However, there is one exception in the other direction, when +even a one-line block should have braces. +That occurs when that one-line, brace-less block +is an "else" block, and the corresponding "then" block *does* use braces. +In that case, either put braces around the "else" block, or negate the +"if"-condition and swap the bodies, putting the one-line block first +and making the longer, multi-line block be the "else" block. + + if (expr) + { + ... + ... + } + else + x = y; // BAD: braceless "else" with braced "then" + +This is preferred, especially when the multi-line body is more +than a few lines long, because it is easier to read and grasp +the semantics of an if-then-else block when the simpler block +occurs first, rather than after the more involved block: + + if (!expr) + x = y; /* more readable */ + else + { + ... + ... + } + +If you'd rather not negate the condition, then add braces: + + if (expr) + { + ... + ... + } + else + { + x = y; + } + + Use SPACE-only indentation in all[*] files ========================================== We use space-only indentation in nearly all files.

2 3

[libvirt] [PATCH 0/3] lxc: Fix domain lookup and error handling
by jdenemar＠redhat.com 04 May '10

04 May '10

From: Jiri Denemark <jdenemar(a)redhat.com> Jiri Denemark (3): lxc: Use virDomainFindByUUID for domain lookup lxc: Make SetMemory work for active domains only lxc: Check domain is active/inactive as required by operation src/lxc/lxc_driver.c | 138 ++++++++++++++++++++++++++++++++++---------------- 1 files changed, 94 insertions(+), 44 deletions(-)

4 10

[libvirt] qemu-kvm spending time in do_info_migrate() during virDomainSave(); 50ms polling too fast?
by Charles Duffy 04 May '10

04 May '10

...or more particularly, in ram_bytes_remaining() called by do_info_migrate(); oddly, this is much more pronounced when running with <emulator> pointing at a shim prepending -no-kvm-irqchip to the invoked command line. This VM was intended to be paused for the save event (if my software was doing its job correctly), so we shouldn't be spending time running the guest CPU and writing updates for already-once-written blocks. I'm seeing much more CPU time spent inside qemu-kvm than in the exec'd lzop process compressing and writing the data stream; on attaching gdb and taking some stack traces to sample where execution time was spent, it appeared that we were spending our time responding to requests from the monitor. The question then -- is the 50ms poll in qemuDomainWaitForMigrationComplete (called from qemudDomainSave) perhaps too frequent? Thanks! --- Below is an exchange from IRC: <nDuff> How often should libvirt be calling "info migrate" during a virDomainSave (of a qemu domain)? * nDuff is seeing his qemu-kvm spending the bulk of its time inside ram_bytes_remaining() under do_info_migrate(). <DV> nDuff: I doubt libvirt is doing this on his own, something else is asking for the information I would assume <nDuff> DV, I'm not running virt-manager or such; the only management layer on top is locally developed, and it only has a single thread that's blocked waiting for the dom.save() call [this is using the Python bindings] to complete. <DV> interesting <DV> nDuff -> send this to the list, someone need to look at it, at least raise the problem, maybe we didn't expected that to be so costly <DV> nDuff: maybe open a bugzilla <nDuff> it might be that it's not _usually_ so costly except that I'm hitting a qemu/kvm bug; it only started expressing itself when I added -no-kvm-irqchip to the commandline via a shim <DV> nDuff: I could see how trying to extract this too often could stall the migration process <nDuff> ...but yes, I'll post to the list. <DV> nDuff: maybe it's related to the capability to force migration end when the full flush will be shorter than a user defined limit

3 3

[libvirt] [PATCH] nwfilter: skip interfaces on filter update
by Stefan Berger 04 May '10

04 May '10

When a filter is updated, only those interfaces must have their old rules cleared that either reference the filter directly or indirectly through another filter. Remember between the different steps of the instantiation of the filters which interfaces must be skipped. I am using a hash map to remember the names of the interfaces and store a bogus pointer to ~0 into it that need not be freed. Signed-off-by: Stefan Berger <stefanb(a)us.ibm.com> --- src/conf/nwfilter_conf.c | 8 ++++ src/conf/nwfilter_conf.h | 1 src/nwfilter/nwfilter_gentech_driver.c | 66 ++++++++++++++++++++++++--------- src/nwfilter/nwfilter_gentech_driver.h | 3 + 4 files changed, 59 insertions(+), 19 deletions(-) Index: libvirt-acl/src/conf/nwfilter_conf.c =================================================================== --- libvirt-acl.orig/src/conf/nwfilter_conf.c +++ libvirt-acl/src/conf/nwfilter_conf.c @@ -2088,8 +2088,14 @@ virNWFilterTriggerVMFilterRebuild(virCon .conn = conn, .err = 0, .step = STEP_APPLY_NEW, + .skipInterfaces = virHashCreate(0), }; + if (!cb.skipInterfaces) { + virReportOOMError(); + return 1; + } + for (i = 0; i < nCallbackDriver; i++) { callbackDrvArray[i]->vmFilterRebuild(conn, virNWFilterDomainFWUpdateCB, @@ -2115,6 +2121,8 @@ virNWFilterTriggerVMFilterRebuild(virCon &cb); } + virHashFree(cb.skipInterfaces, NULL); + return err; } Index: libvirt-acl/src/conf/nwfilter_conf.h =================================================================== --- libvirt-acl.orig/src/conf/nwfilter_conf.h +++ libvirt-acl/src/conf/nwfilter_conf.h @@ -471,6 +471,7 @@ struct domUpdateCBStruct { virConnectPtr conn; enum UpdateStep step; int err; + virHashTablePtr skipInterfaces; }; Index: libvirt-acl/src/nwfilter/nwfilter_gentech_driver.h =================================================================== --- libvirt-acl.orig/src/nwfilter/nwfilter_gentech_driver.h +++ libvirt-acl/src/nwfilter/nwfilter_gentech_driver.h @@ -40,7 +40,8 @@ enum instCase { int virNWFilterInstantiateFilter(virConnectPtr conn, const virDomainNetDefPtr net); int virNWFilterUpdateInstantiateFilter(virConnectPtr conn, - const virDomainNetDefPtr net); + const virDomainNetDefPtr net, + bool *skipIface); int virNWFilterRollbackUpdateFilter(virConnectPtr conn, const virDomainNetDefPtr net); Index: libvirt-acl/src/nwfilter/nwfilter_gentech_driver.c =================================================================== --- libvirt-acl.orig/src/nwfilter/nwfilter_gentech_driver.c +++ libvirt-acl/src/nwfilter/nwfilter_gentech_driver.c @@ -316,7 +316,7 @@ _virNWFilterInstantiateRec(virConnectPtr virNWFilterHashTablePtr vars, int *nEntries, virNWFilterRuleInstPtr **insts, - enum instCase useNewFilter, int *foundNewFilter, + enum instCase useNewFilter, bool *foundNewFilter, virNWFilterDriverStatePtr driver) { virNWFilterPoolObjPtr obj; @@ -381,7 +381,7 @@ _virNWFilterInstantiateRec(virConnectPtr case INSTANTIATE_FOLLOW_NEWFILTER: if (obj->newDef) { next_filter = obj->newDef; - *foundNewFilter = 1; + *foundNewFilter = true; } break; case INSTANTIATE_ALWAYS: @@ -562,7 +562,7 @@ virNWFilterInstantiate(virConnectPtr con int ifindex, const char *linkdev, virNWFilterHashTablePtr vars, - enum instCase useNewFilter, int *foundNewFilter, + enum instCase useNewFilter, bool *foundNewFilter, bool teardownOld, const unsigned char *macaddr, virNWFilterDriverStatePtr driver, @@ -693,7 +693,8 @@ __virNWFilterInstantiateFilter(virConnec virNWFilterHashTablePtr filterparams, enum instCase useNewFilter, virNWFilterDriverStatePtr driver, - bool forceWithPendingReq) + bool forceWithPendingReq, + bool *foundNewFilter) { int rc; const char *drvname = EBIPTABLES_DRIVER_ID; @@ -702,7 +703,6 @@ __virNWFilterInstantiateFilter(virConnec virNWFilterHashTablePtr vars, vars1; virNWFilterDefPtr filter; char vmmacaddr[VIR_MAC_STRING_BUFLEN] = {0}; - int foundNewFilter = 0; char *str_macaddr = NULL; const char *ipaddr; char *str_ipaddr = NULL; @@ -775,7 +775,7 @@ __virNWFilterInstantiateFilter(virConnec case INSTANTIATE_FOLLOW_NEWFILTER: if (obj->newDef) { filter = obj->newDef; - foundNewFilter = 1; + *foundNewFilter = true; } break; @@ -791,7 +791,7 @@ __virNWFilterInstantiateFilter(virConnec ifindex, linkdev, vars, - useNewFilter, &foundNewFilter, + useNewFilter, foundNewFilter, teardownOld, macaddr, driver, @@ -816,7 +816,8 @@ static int _virNWFilterInstantiateFilter(virConnectPtr conn, const virDomainNetDefPtr net, bool teardownOld, - enum instCase useNewFilter) + enum instCase useNewFilter, + bool *foundNewFilter) { const char *linkdev = (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) ? net->data.direct.linkdev @@ -837,7 +838,8 @@ _virNWFilterInstantiateFilter(virConnect net->filterparams, useNewFilter, conn->nwfilterPrivateData, - false); + false, + foundNewFilter); } @@ -853,6 +855,8 @@ virNWFilterInstantiateFilterLate(virConn virNWFilterDriverStatePtr driver) { int rc; + bool foundNewFilter = false; + rc = __virNWFilterInstantiateFilter(conn, 1, ifname, @@ -864,7 +868,8 @@ virNWFilterInstantiateFilterLate(virConn filterparams, INSTANTIATE_ALWAYS, driver, - true); + true, + &foundNewFilter); if (rc) { //something went wrong... 'DOWN' the interface if (ifaceCheck(false, ifname, NULL, ifindex) != 0 || @@ -881,19 +886,29 @@ int virNWFilterInstantiateFilter(virConnectPtr conn, const virDomainNetDefPtr net) { + bool foundNewFilter = false; + return _virNWFilterInstantiateFilter(conn, net, 1, - INSTANTIATE_ALWAYS); + INSTANTIATE_ALWAYS, + &foundNewFilter); } int virNWFilterUpdateInstantiateFilter(virConnectPtr conn, - const virDomainNetDefPtr net) + const virDomainNetDefPtr net, + bool *skipIface) { - return _virNWFilterInstantiateFilter(conn, net, - 0, - INSTANTIATE_FOLLOW_NEWFILTER); + bool foundNewFilter = false; + + int rc = _virNWFilterInstantiateFilter(conn, net, + 0, + INSTANTIATE_FOLLOW_NEWFILTER, + &foundNewFilter); + + *skipIface = !foundNewFilter; + return rc; } int virNWFilterRollbackUpdateFilter(virConnectPtr conn, @@ -993,6 +1008,7 @@ virNWFilterDomainFWUpdateCB(void *payloa virDomainDefPtr vm = obj->def; struct domUpdateCBStruct *cb = data; int i; + bool skipIface; virDomainObjLock(obj); @@ -1003,15 +1019,29 @@ virNWFilterDomainFWUpdateCB(void *payloa switch (cb->step) { case STEP_APPLY_NEW: cb->err = virNWFilterUpdateInstantiateFilter(cb->conn, - net); + net, + &skipIface); + if (cb->err == 0 && skipIface == true) { + // filter tree unchanged -- no update needed + cb->err = virHashAddEntry(cb->skipInterfaces, + net->ifname, + (void *)~0); + if (cb->err) + virReportOOMError(); + } break; case STEP_TEAR_NEW: - cb->err = virNWFilterRollbackUpdateFilter(cb->conn, net); + if ( !virHashLookup(cb->skipInterfaces, net->ifname)) { + cb->err = virNWFilterRollbackUpdateFilter(cb->conn, + net); + } break; case STEP_TEAR_OLD: - cb->err = virNWFilterTearOldFilter(cb->conn, net); + if ( !virHashLookup(cb->skipInterfaces, net->ifname)) { + cb->err = virNWFilterTearOldFilter(cb->conn, net); + } break; } if (cb->err)

2 2

[libvirt] [PATCH] mingw: Fix two undefined symbols
by Matthias Bolte 04 May '10

04 May '10

Add an empty body for virCondWaitUntil and move virPipeReadUntilEOF out of the '#ifndef WIN32' block, because it compiles fine with MinGW in combination with gnulib. --- src/util/threads-win32.c | 10 +++ src/util/util.c | 160 +++++++++++++++++++++++----------------------- 2 files changed, 90 insertions(+), 80 deletions(-) diff --git a/src/util/threads-win32.c b/src/util/threads-win32.c index a30bccf..e478560 100644 --- a/src/util/threads-win32.c +++ b/src/util/threads-win32.c @@ -157,6 +157,16 @@ int virCondWait(virCondPtr c, virMutexPtr m) return 0; } +int virCondWaitUntil(virCondPtr c ATTRIBUTE_UNUSED, + virMutexPtr m ATTRIBUTE_UNUSED, + unsigned long long whenms ATTRIBUTE_UNUSED) +{ + /* FIXME: this function is currently only used by the QEMU driver that + * is not compiled on Windows, so it's okay for now to just + * miss an implementation */ + return -1; +} + void virCondSignal(virCondPtr c) { virMutexLock(&c->lock); diff --git a/src/util/util.c b/src/util/util.c index 3209185..e444c97 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -782,86 +782,6 @@ int virExecDaemonize(const char *const*argv, return ret; } -int -virPipeReadUntilEOF(int outfd, int errfd, - char **outbuf, char **errbuf) { - - struct pollfd fds[2]; - int i; - int finished[2]; - - fds[0].fd = outfd; - fds[0].events = POLLIN; - finished[0] = 0; - fds[1].fd = errfd; - fds[1].events = POLLIN; - finished[1] = 0; - - while(!(finished[0] && finished[1])) { - - if (poll(fds, ARRAY_CARDINALITY(fds), -1) < 0) { - if ((errno == EAGAIN) || (errno == EINTR)) - continue; - goto pollerr; - } - - for (i = 0; i < ARRAY_CARDINALITY(fds); ++i) { - char data[1024], **buf; - int got, size; - - if (!(fds[i].revents)) - continue; - else if (fds[i].revents & POLLHUP) - finished[i] = 1; - - if (!(fds[i].revents & POLLIN)) { - if (fds[i].revents & POLLHUP) - continue; - - virUtilError(VIR_ERR_INTERNAL_ERROR, - "%s", _("Unknown poll response.")); - goto error; - } - - got = read(fds[i].fd, data, sizeof(data)); - - if (got == 0) { - finished[i] = 1; - continue; - } - if (got < 0) { - if (errno == EINTR) - continue; - if (errno == EAGAIN) - break; - goto pollerr; - } - - buf = ((fds[i].fd == outfd) ? outbuf : errbuf); - size = (*buf ? strlen(*buf) : 0); - if (VIR_REALLOC_N(*buf, size+got+1) < 0) { - virReportOOMError(); - goto error; - } - memmove(*buf+size, data, got); - (*buf)[size+got] = '\0'; - } - continue; - - pollerr: - virReportSystemError(errno, - "%s", _("poll error")); - goto error; - } - - return 0; - -error: - VIR_FREE(*outbuf); - VIR_FREE(*errbuf); - return -1; -} - /** * @argv NULL terminated argv to run * @status optional variable to return exit status in @@ -1008,6 +928,86 @@ virExecDaemonize(const char *const*argv ATTRIBUTE_UNUSED, # endif /* WIN32 */ int +virPipeReadUntilEOF(int outfd, int errfd, + char **outbuf, char **errbuf) { + + struct pollfd fds[2]; + int i; + int finished[2]; + + fds[0].fd = outfd; + fds[0].events = POLLIN; + finished[0] = 0; + fds[1].fd = errfd; + fds[1].events = POLLIN; + finished[1] = 0; + + while(!(finished[0] && finished[1])) { + + if (poll(fds, ARRAY_CARDINALITY(fds), -1) < 0) { + if ((errno == EAGAIN) || (errno == EINTR)) + continue; + goto pollerr; + } + + for (i = 0; i < ARRAY_CARDINALITY(fds); ++i) { + char data[1024], **buf; + int got, size; + + if (!(fds[i].revents)) + continue; + else if (fds[i].revents & POLLHUP) + finished[i] = 1; + + if (!(fds[i].revents & POLLIN)) { + if (fds[i].revents & POLLHUP) + continue; + + virUtilError(VIR_ERR_INTERNAL_ERROR, + "%s", _("Unknown poll response.")); + goto error; + } + + got = read(fds[i].fd, data, sizeof(data)); + + if (got == 0) { + finished[i] = 1; + continue; + } + if (got < 0) { + if (errno == EINTR) + continue; + if (errno == EAGAIN) + break; + goto pollerr; + } + + buf = ((fds[i].fd == outfd) ? outbuf : errbuf); + size = (*buf ? strlen(*buf) : 0); + if (VIR_REALLOC_N(*buf, size+got+1) < 0) { + virReportOOMError(); + goto error; + } + memmove(*buf+size, data, got); + (*buf)[size+got] = '\0'; + } + continue; + + pollerr: + virReportSystemError(errno, + "%s", _("poll error")); + goto error; + } + + return 0; + +error: + VIR_FREE(*outbuf); + VIR_FREE(*errbuf); + return -1; +} + +int virRun(const char *const*argv, int *status) { return virRunWithHook(argv, NULL, NULL, status); -- 1.7.0.4

2 2

[libvirt] [PATCH] configure.ac: avoid uname, which breaks cross-compilation
by Eric Blake 04 May '10

04 May '10

Without this patch, compiling to mingw with a $build on windows (think MSYS or cygwin) worked, but failed with a $build on Linux. * configure.ac: Fix cross-compilation from Linux to mingw. Reported by Matthias Bolte. --- configure.ac | 13 +++++++++---- 1 files changed, 9 insertions(+), 4 deletions(-) diff --git a/configure.ac b/configure.ac index 0fb8bd9..3225cfa 100644 --- a/configure.ac +++ b/configure.ac @@ -197,8 +197,8 @@ if test "$prefix" = "/usr" && test "$sysconfdir" = '${prefix}/etc' ; then fi dnl lxc and qemu drivers require linux headers -if test `uname -s` != "Linux" -then +case $host in + linux*) if test "x$with_lxc" != "xyes" then with_lxc=no @@ -207,7 +207,8 @@ then then with_qemu=no fi -fi + ;; +esac dnl Allow to build without Xen, QEMU/KVM, test or remote driver AC_ARG_WITH([xen], @@ -1970,7 +1971,11 @@ then fi AM_CONDITIONAL([WITH_NODE_DEVICES], [test "$with_nodedev" = "yes"]) -AM_CONDITIONAL([WITH_LINUX], [test `uname -s` = "Linux"]) +case $host in + linux*) with_linux=yes ;; + *) with_linux=no ;; +esac +AM_CONDITIONAL([WITH_LINUX], [test $with_linux = yes]) AC_ARG_WITH([qemu-user], -- 1.6.6.1

1 1