- Devel - libvirt List Archives

[libvirt] [PATCH 0/3] allow fixing tap-bridge connections when network is restarted
by Laine Stump 22 Mar '17

22 Mar '17

It's been a long-standing problem that when you stop and restart a libvirt network, the guest tap devices are no longer connected to the network. Until now the only way to recover from this was to either shutdown and restart all the affected guests, or to detach and then re-attach all affected guest network devices. These patches permit the situation to be remedied by just restarting libvirtd - when the hypervisor drivers are notifying the network drivers of each connection, the network can retrieve the current "master" for the tap device and compare it to the network's bridge device. If they don't match, then it disconnects the tap from any incorrect bridge and connects to the correct bridge. *** For now, that's as far as we go - *semi*-automated (since you need to restart libvirtd for it to happen). My intent is for this to be completely automated, but the logic to do that is a bit "convoluted" so I've deferred trying to implement it until I've given it more thought - a few different trains of thought have led to dead-ends, and so far only one seems reasonably doable: * add a networkStartCallback list to the network driver state object. * as each hypervisor driver that uses the network driver is initialized, it will call an internal-only function in the network driver to register a callback. * whenever a network is started, it will call all the registered callback functions (sending the name of the network being started, and some HV-specific context pointer). * Each hypervisor's callback function will look through all of its active domains for interfaces that are using the given network, and for each such interface, will call networkNotifyActualDevice() (the function that has been updated in Patch 3/3 to reconnect taps to bridges). The "convoluted" part here is that we need to make sure there is enough (but not too much!) locking/refcounting both when adding items to the callback list (which should only be done single threaded, since it happens during the driver initializations) and when the networkStart() function (in some state of lockedness/refcountedness) calls over to some e.g. qemu function that will then need to do some amount of locking (at least on each domain as it is processed) and then calls back into the network driver (which will need "some amount" of locking/refcounting). Since we're calling from network driver into qemu into network driver, while the normal nesting is just calling from qemu into network, I want to be sure there is no possibility for a deadlock. (Also, I want to avoid making the list of callbacks any more complicated than absolutely necessary - the "in" thing to do these days seems to be to allocate a hash table, but there's a lot of extra code required for that (see util/virclosecallbacks.[hc]) which seems like overkill for a list of maximum 4-5 items that will *never* change after the driver initialization - if anyone has ideas/opinions about that, please speak up. Laine Stump (2): util: new function virNetDevGetMaster() util: new function virNetDevTapAttachBridge() root (1): network: reconnect tap devices during networkNotifyActualDevice src/libvirt_private.syms | 2 + src/network/bridge_driver.c | 30 +++++++++++- src/util/virnetdev.c | 49 +++++++++++++++++++ src/util/virnetdev.h | 3 ++ src/util/virnetdevtap.c | 111 +++++++++++++++++++++++++++++--------------- src/util/virnetdevtap.h | 12 +++++ 6 files changed, 169 insertions(+), 38 deletions(-) -- 2.9.3

2 4

[libvirt] [PATCH 00/22] Resolve Coverity and build issues
by John Ferlan 22 Mar '17

22 Mar '17

Hopefully the quantity doesn't scare anyone off... These are mostly innocuous, but separated each out to appease the masses. The first patch fixes a recently uncovered Coverity warning regarding FORWARD_NULL of the 'formatStr'... According to an IRC response from pkrempa the format should be set up properly in qemuDomainSnapshotPrepare Patches 2-22 resolve various different build issues in the Coverity environment that sets "lv_cv_static_analysis=yes" during the build. This is 'reproducible' if one sets that as part of their autogen.sh processing - something that we should probably do in the CI build environment so we can get all those ATTRIBUTE_NONNULL checks to be run on a daily basis. John Ferlan (22): qemu: Always format formatStr for blockdev-snapshot-sync util: Remove NONNULL(1) for virNetDevGetName conf: Remove NONNULL(2) for virNetDevBandwidthParse conf: Remove NONNULL(1,2) for virNetDevBandwidthFormat conf: Remove NONNULL(1) for virDomainNumaGetNodeCount network: Remove null newBandwidth check from networkBandwidthUpdate qemu: Remove non null 'vm' check from qemuMonitorOpen qemu: Remove NONNULL(1) for qemu_monitor prototypes util: Change return argument for virBitmapParseUnlimited util: Remove NONNULL(1) for virBitmapParseUnlimited util: Remove NONNULL(2,3) for virHostdevReAttachPCIDevices util: Remove NONNULL(2,3) for virHostdevReAttachUSBDevices util: Remove NONNULL(2,3) for virHostdevReAttachSCSIVHostDevices util: Remove NONNULL(1) for virHostdevPrepareDomainDevices util: Remove NONNULL(1) for virHostdevReAttachDomainDevices util: Remove NONNULL(1) for virNetDevOpenvswitchSetMigrateData util: Remove NONNULL(1,3,4) from virTypedParamsFilter util: Remove NONNULL(2) for virNetDevBandwidthPlug util: Remove NONNULL(1) for virNetDevOpenvswitchGetVhostuserIfname util: Remove NONNULL's for virNetDevVPortProfile[Associate|Disassociate] util: Remove NONNULL(1) for virNetDevMacVLanDeleteWithVPortProfile cpu: Remove NONNULL(1) for cpuBaseline src/conf/netdev_bandwidth_conf.c | 2 +- src/conf/netdev_bandwidth_conf.h | 5 ++--- src/conf/numa_conf.h | 4 ++-- src/cpu/cpu.h | 3 +-- src/network/bridge_driver.c | 2 +- src/qemu/qemu_driver.c | 3 +-- src/qemu/qemu_monitor.c | 3 +-- src/qemu/qemu_monitor.h | 8 ++++---- src/util/virbitmap.c | 28 +++++++++++++--------------- src/util/virbitmap.h | 6 ++---- src/util/virhostdev.c | 9 ++++++--- src/util/virhostdev.h | 10 +++++----- src/util/virnetdev.h | 2 +- src/util/virnetdevbandwidth.h | 3 +-- src/util/virnetdevmacvlan.h | 2 +- src/util/virnetdevopenvswitch.h | 4 ++-- src/util/virnetdevvportprofile.h | 10 ++++------ src/util/virtypedparam.h | 3 +-- tests/testutils.c | 2 +- tests/virbitmaptest.c | 2 +- 20 files changed, 51 insertions(+), 60 deletions(-) -- 2.9.3

3 25

[libvirt] [PATCH 0/3] Three random small patches
by Laine Stump 22 Mar '17

22 Mar '17

I found these while trying out some other code I decided not to use (I was going to add more attributes to the <link> element, virNetDevIfLink, and virNetDevGetLinkInfo(), but then decided not to for now (in case Michal has a different idea of the meaning of "link" than, e.g., iproute's "ip link" command). The first two taken together actually have a very positive impact - they make the output of "virsh nodedev-dumpxml" much more informative when run as non-root. Laine Stump (3): util: use AF_UNIX family (not AF_PACKET) for ioctl sockets util: allow retrieving ethtool features when unprivileged network: remove unused typedef for networkDnsmasqLeaseFileNameFunc src/network/bridge_driver.h | 2 -- src/util/virnetdev.c | 8 +------- src/util/virnetdevip.c | 2 +- 3 files changed, 2 insertions(+), 10 deletions(-) -- 2.9.3

2 5

[libvirt] [PATCH v3 00/15] Introduce vGPU mdev framework to libvirt
by Erik Skultety 22 Mar '17

22 Mar '17

since v1: - new <hostdev> attribute model introduced which tells libvirt which device API should be considered when auto-assigning guest address - device_api is properly checked, thus taking the 'model' attribute only as a hint to assign "some" address - new address type 'mdev' is introduced rather than using plain <uuid> element, since the address element is more conveniently extendable. - the emulated mtty driver now works as well out of the box, so no HW needed to review this series --> let's try it :) - fixed all the nits from v1 since v2: - dropped the patch introducing new address type 'mdev' since I added by mistake and only after that realized that the device address type enum is used for guest addresses only --> the mdevs are still identified by address element containing an 'uuid' attribute, I just dropped the enum - resolved the driver hostdev list race condition raised by Pavel in his review --> the device API is now checked every time our internal mdev object is created as opposed to the previous version where because of the model being checked separately, the locking issues arose. - rewrote the docs, reflecting the mdev address type drop change - squashed all security related stuff into 1 patch, also added app-armor bits - as Pavel suggested, moved most of the mdev-related functions out of virhostdev.c to virmdev.c - added a few more test cases I also created a new branch 'mdev-next' (more suitable name than a strict version number) on https://github.com/eskultety/libvirt/commits/mdev-next Erik Erik Skultety (15): conf: hostdev: Enforce enum-in-switch compile-time checks conf: hostdev: Introduce virDomainHostdevSubsysSCSIClear conf: Introduce virDomainHostdevDefPostParse conf: Introduce new hostdev device type mdev conf: Add post parse code for mdevs to virDomainHostdevDefPostParse security: Enable labeling of vfio mediated devices conf: Enable cold-plug of a mediated device qemu: Assign PCI addresses for mediated devices as well hostdev: Maintain a driver list of active mediated devices qemu: cgroup: Adjust cgroups' logic to allow mediated devices qemu: Bump the memory locking limit for mdevs as well qemu: Format mdevs on qemu command line test: Add some test cases for our test suite regarding the mdevs docs: Document the new hostdev and address type 'mdev' news: Update the NEWS.xml about the new mdev feature docs/formatdomain.html.in | 46 +- docs/news.xml | 10 + docs/schemas/domaincommon.rng | 22 + po/POTFILES.in | 1 + src/Makefile.am | 1 + src/conf/domain_conf.c | 225 ++++++++-- src/conf/domain_conf.h | 9 + src/libvirt_private.syms | 25 ++ src/qemu/qemu_command.c | 45 ++ src/qemu/qemu_command.h | 5 + src/qemu/qemu_domain.c | 24 +- src/qemu/qemu_domain.h | 1 + src/qemu/qemu_domain_address.c | 14 +- src/qemu/qemu_hostdev.c | 56 +++ src/qemu/qemu_hostdev.h | 10 + src/qemu/qemu_hotplug.c | 2 + src/security/security_apparmor.c | 22 + src/security/security_dac.c | 43 ++ src/security/security_selinux.c | 45 ++ src/util/virhostdev.c | 165 ++++++- src/util/virhostdev.h | 23 + src/util/virmdev.c | 487 +++++++++++++++++++++ src/util/virmdev.h | 123 ++++++ tests/domaincapsschemadata/full.xml | 1 + ...ml2argv-hostdev-mdev-invalid-target-address.xml | 33 ++ ...muxml2argv-hostdev-mdev-src-address-invalid.xml | 35 ++ .../qemuxml2argv-hostdev-mdev-unmanaged.args | 25 ++ .../qemuxml2argv-hostdev-mdev-unmanaged.xml | 35 ++ tests/qemuxml2argvtest.c | 9 + .../qemuxml2xmlout-hostdev-mdev-unmanaged.xml | 40 ++ tests/qemuxml2xmltest.c | 1 + 31 files changed, 1528 insertions(+), 55 deletions(-) create mode 100644 src/util/virmdev.c create mode 100644 src/util/virmdev.h create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-mdev-invalid-target-address.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-mdev-src-address-invalid.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-mdev-unmanaged.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-mdev-unmanaged.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-hostdev-mdev-unmanaged.xml -- 2.12.0

3 20

[libvirt] [BUG] mlock support breakage
by Luiz Capitulino 22 Mar '17

22 Mar '17

Libvirt commit c2e60ad0e51 added a new check to the XML validation logic where XMLs containing <memoryBacking><mlocked/> must also contain <memtune><hard_limit>. This causes two breakages where working guests won't start anymore: 1. Systems where mlock limit was set in /etc/security/limits.conf 2. Guests using hugeTLB pages. In this case, guests were relying on the fact that libvirt automagically increases mlock limit to 1GB While it's true that <memoryBacking><mlocked/> documentation says that <memtune><hard_limit> is required, this is actually an extremely bad request because: A. <memtune><hard_limit> own documention strongly recommends NOT using it B. <memtune><hard_limit> does more than setting memory locking limit C. <memtune><hard_limit> does not support infinity, so you have to guess a limit D. If <memtune><hard_limit> is less than 1GB, it will lower VFIO's automatic limit of "guest memory + 1GB" Here's two possible solutions to fix this all: 1. Drop change c2e60ad0e51 and drop automatic increases. Let users configure limits in /etc/security/limits.conf pros: this is the most correct way to do it, and how it should be done originally IMHO cons: will break working VFIO setups, so probably undoable 2. Drop change c2e60ad0e51 and automtically increase memory locking limit to infinity when seeing <memoryBacking><locked/> pros: make all cases work, no more <hard_limit> requirement cons: allows guests with <locked/> to lock all memory assigned to them plus QEMU allocations. While this seems undesirable or even a security issue, using <hard_limit> will have the same effect Lastly, <locked/> doesn't belong to <memoryBacking>, it should be in <memtune>. I recommend deprecating it from <memoryBacking> and adding it where it belongs.

5 18

[libvirt] [PATCH 0/3] Debug: Improve log messages.
by Prerna Saxena 22 Mar '17

22 Mar '17

Libvirt logs include many snippets for debugging daemon state, but some of those messages are either missing vital information or end up logging "errors" for normal operating conditions as well. This series improves log messages, also adding additional WARN'ings for connection instantiation and closure. Prerna Saxena (3): Debug: Add WARN'ing messages for when a client has opened/closed connection. Debug: Remove unnecessary errors reported while parsing non-existent sysfs files. Debug: Report VM errors more concisely. src/qemu/qemu_process.c | 4 ++-- src/rpc/virnetserverclient.c | 18 ++++++++++++++---- src/util/virnetdev.c | 2 +- 3 files changed, 17 insertions(+), 7 deletions(-) -- 1.8.1.2

3 10

Re: [libvirt] [PATCH 3/3] Debug: Report VM errors more concisely.
by Prerna 22 Mar '17

22 Mar '17

Oops, sorry. Dropping the list was not intentional. I didnt realise I had sent a "reply" in place of "reply-all" . Adding back :) I still would argue that having the VM's name narrows down the problem space. If a client knows what operations have been fired for a VM over the last time window, it is not too difficult to deduce which of them could have caused this message to occur. As I said before, use of libvirt Debug logs adds way too much logspew. If we have more pointed error/warning messages, it can largely help debugging on its own. Even if we turn debugging on, libvirt honestly has way too many messages that look like an en-masse CTRL-C/V operation. Sample: All qemuMonitorEmit* except one have this message: VIR_DEBUG("mon=%p", mon); Even if this message shows up in logs, it is near impossible to trace which event was seen by the VM. And it is quite another task to see which VM this monitor belonged to. Not that more vebosity wont help here. However, I am only trying to make logs easier to work with. Every message should ideally contribute to something meaningful, else it has little value to add while debugging. On Wed, Mar 22, 2017 at 1:59 PM, Peter Krempa <pkrempa(a)redhat.com> wrote: > [Please don't drop the list on the responses.] > > On Wed, Mar 22, 2017 at 13:52:14 +0530, Prerna wrote: > > Always enabling debug logs adds a *lot* of logspew. > > It would be good to have self-sufficient error messages, dont you think ? > > What is wrong with adding a VM name field here ? > > It's mostly useless. You get the VM name, but you don't have the > operation that failed. So it's useless for debugging. >

1 0

[libvirt] [PATCH] cleanup: qemu_capabilities: remove redundant error messages
by Chen Hanxiao 22 Mar '17

22 Mar '17

From: Chen Hanxiao <chenhanxiao(a)gmail.com> We reported error in caller qemuConnectGetDomainCapabilities. So the same error messages in virQEMUCapsCacheLookupByArch are useless. Signed-off-by: Chen Hanxiao <chenhanxiao(a)gmail.com> --- src/qemu/qemu_capabilities.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 5a3b4ac..eca46e7 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -5192,10 +5192,6 @@ virQEMUCapsCacheLookupByArch(virCapsPtr caps, virQEMUCapsCacheValidate(cache, binary, caps, &ret); VIR_FREE(binary); } - } else { - virReportError(VIR_ERR_INVALID_ARG, - _("unable to find any emulator to serve '%s' " - "architecture"), virArchToString(arch)); } virObjectRef(ret); -- 2.7.4

2 3

[libvirt] [PATCH] qemu: Fix qemuMonitorOpen prototype
by John Ferlan 21 Mar '17

21 Mar '17

Commit id '85af0b8' added a 'timeout' as the 4th parameter to qemuMonitorOpen, but neglected to update the ATTRIBUTE_NONNULL(4) to be (5) for the cb parameter. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- Pushed as a Coverity build breaker. src/qemu/qemu_monitor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index c3d3f2f..cf79424 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -249,7 +249,7 @@ qemuMonitorPtr qemuMonitorOpen(virDomainObjPtr vm, unsigned long long timeout, qemuMonitorCallbacksPtr cb, void *opaque) - ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(4); + ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(5); qemuMonitorPtr qemuMonitorOpenFD(virDomainObjPtr vm, int sockfd, bool json, -- 2.9.3

1 0

[libvirt] [PATCH v2] cleanup: qemu_capabilities: remove redundant error messages
by Chen Hanxiao 21 Mar '17

21 Mar '17

From: Chen Hanxiao <chenhanxiao(a)gmail.com> We reported error in caller virQEMUCapsCacheLookupByArch. So the same error messages in qemuConnectGetDomainCapabilities is useless. Signed-off-by: Chen Hanxiao <chenhanxiao(a)gmail.com> --- v2: remove extra error message in qemuConnectGetDomainCapabilities instead of virQEMUCapsCacheLookupByArch. src/qemu/qemu_driver.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index dcd823f..0e06508 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -18713,12 +18713,8 @@ qemuConnectGetDomainCapabilities(virConnectPtr conn, } else { if (!(qemuCaps = virQEMUCapsCacheLookupByArch(caps, driver->qemuCapsCache, - arch))) { - virReportError(VIR_ERR_INVALID_ARG, - _("unable to find any emulator to serve '%s' " - "architecture"), virArchToString(arch)); + arch))) goto cleanup; - } emulatorbin = virQEMUCapsGetBinary(qemuCaps); } -- 2.7.4

2 1

[libvirt] [PATCH] network: don't add "no-resolv" if we still need DNS servers from resolv.conf
by Laine Stump 21 Mar '17

21 Mar '17

It was pointed out here: https://bugzilla.redhat.com/show_bug.cgi?id=1331796#c4 that we shouldn't be adding a "no-resolv" to the dnsmasq.conf file for a network if there isn't any <forwarder> element that specifies an IP address but no qualifying domain. If there is such an element, it will handle all DNS requests that weren't otherwise handled by one of the forwarder entries with a matching domain attribute. If not, then DNS requests that don't match the domain of any <forwarder> would not be resolved if we added no-resolv. So, only add "no-resolv" when there is at least one <forwarder> element that specifies an IP address but no qualifying domain. --- src/network/bridge_driver.c | 14 +++++++++++++- .../nat-network-dns-forwarder-no-resolv.conf | 12 ++++++++++++ .../nat-network-dns-forwarder-no-resolv.xml | 11 +++++++++++ tests/networkxml2confdata/nat-network-dns-forwarders.conf | 2 +- tests/networkxml2conftest.c | 1 + .../nat-network-dns-forwarder-no-resolv.xml | 11 +++++++++++ .../nat-network-dns-forwarder-no-resolv.xml | 11 +++++++++++ tests/networkxml2xmltest.c | 1 + 8 files changed, 61 insertions(+), 2 deletions(-) create mode 100644 tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.conf create mode 100644 tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.xml create mode 100644 tests/networkxml2xmlin/nat-network-dns-forwarder-no-resolv.xml create mode 100644 tests/networkxml2xmlout/nat-network-dns-forwarder-no-resolv.xml diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index c5ec282..32c5ab7 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -1085,7 +1085,15 @@ networkDnsmasqConfContents(virNetworkObjPtr network, virBufferAddLit(&configbuf, "port=0\n"); if (wantDNS && network->def->dns.forwarders) { - virBufferAddLit(&configbuf, "no-resolv\n"); + /* addNoResolv should be set to true if there are any entries + * that specify an IP address for requests, but no domain + * qualifier (implying that all requests otherwise "unclaimed" + * should be sent to that address). if it is still false when + * we've looked at all entries, it means we still need the + * host's resolv.conf for some cases. + */ + bool addNoResolv = false; + for (i = 0; i < network->def->dns.nfwds; i++) { virNetworkDNSForwarderPtr fwd = &network->def->dns.forwarders[i]; @@ -1099,11 +1107,15 @@ networkDnsmasqConfContents(virNetworkObjPtr network, goto cleanup; virBufferAsprintf(&configbuf, "%s\n", addr); VIR_FREE(addr); + if (!fwd->domain) + addNoResolv = true; } else { /* "don't forward requests for this domain" */ virBufferAddLit(&configbuf, "#\n"); } } + if (addNoResolv) + virBufferAddLit(&configbuf, "no-resolv\n"); } if (network->def->domain) { diff --git a/tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.conf b/tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.conf new file mode 100644 index 0000000..52d000a --- /dev/null +++ b/tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.conf @@ -0,0 +1,12 @@ +##WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE +##OVERWRITTEN AND LOST. Changes to this configuration should be made using: +## virsh net-edit default +## or other application using the libvirt API. +## +## dnsmasq conf file created by libvirt +strict-order +server=/example.com/192.168.1.1 +except-interface=lo +bind-dynamic +interface=virbr0 +addn-hosts=/var/lib/libvirt/dnsmasq/default.addnhosts diff --git a/tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.xml b/tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.xml new file mode 100644 index 0000000..9661ce5 --- /dev/null +++ b/tests/networkxml2confdata/nat-network-dns-forwarder-no-resolv.xml @@ -0,0 +1,11 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9c</uuid> + <forward mode='nat'/> + <bridge name='virbr0' stp='on' delay='0'/> + <dns> + <forwarder domain='example.com' addr='192.168.1.1'/> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + </ip> +</network> diff --git a/tests/networkxml2confdata/nat-network-dns-forwarders.conf b/tests/networkxml2confdata/nat-network-dns-forwarders.conf index 0bd76bf..1b0c94c 100644 --- a/tests/networkxml2confdata/nat-network-dns-forwarders.conf +++ b/tests/networkxml2confdata/nat-network-dns-forwarders.conf @@ -5,11 +5,11 @@ ## ## dnsmasq conf file created by libvirt strict-order -no-resolv server=8.8.8.8 server=8.8.4.4 server=/example.com/192.168.1.1 server=/www.example.com/# +no-resolv except-interface=lo bind-dynamic interface=virbr0 diff --git a/tests/networkxml2conftest.c b/tests/networkxml2conftest.c index 9b61077..e2522fc 100644 --- a/tests/networkxml2conftest.c +++ b/tests/networkxml2conftest.c @@ -137,6 +137,7 @@ mymain(void) DO_TEST("nat-network-dns-hosts", full); DO_TEST("nat-network-dns-forward-plain", full); DO_TEST("nat-network-dns-forwarders", full); + DO_TEST("nat-network-dns-forwarder-no-resolv", full); DO_TEST("nat-network-dns-local-domain", full); DO_TEST("dhcp6-network", dhcpv6); DO_TEST("dhcp6-nat-network", dhcpv6); diff --git a/tests/networkxml2xmlin/nat-network-dns-forwarder-no-resolv.xml b/tests/networkxml2xmlin/nat-network-dns-forwarder-no-resolv.xml new file mode 100644 index 0000000..9661ce5 --- /dev/null +++ b/tests/networkxml2xmlin/nat-network-dns-forwarder-no-resolv.xml @@ -0,0 +1,11 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9c</uuid> + <forward mode='nat'/> + <bridge name='virbr0' stp='on' delay='0'/> + <dns> + <forwarder domain='example.com' addr='192.168.1.1'/> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + </ip> +</network> diff --git a/tests/networkxml2xmlout/nat-network-dns-forwarder-no-resolv.xml b/tests/networkxml2xmlout/nat-network-dns-forwarder-no-resolv.xml new file mode 100644 index 0000000..9661ce5 --- /dev/null +++ b/tests/networkxml2xmlout/nat-network-dns-forwarder-no-resolv.xml @@ -0,0 +1,11 @@ +<network> + <name>default</name> + <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9c</uuid> + <forward mode='nat'/> + <bridge name='virbr0' stp='on' delay='0'/> + <dns> + <forwarder domain='example.com' addr='192.168.1.1'/> + </dns> + <ip address='192.168.122.1' netmask='255.255.255.0'> + </ip> +</network> diff --git a/tests/networkxml2xmltest.c b/tests/networkxml2xmltest.c index cfaf718..effd85a 100644 --- a/tests/networkxml2xmltest.c +++ b/tests/networkxml2xmltest.c @@ -141,6 +141,7 @@ mymain(void) DO_TEST("nat-network-dns-hosts"); DO_TEST("nat-network-dns-forward-plain"); DO_TEST("nat-network-dns-forwarders"); + DO_TEST("nat-network-dns-forwarder-no-resolv"); DO_TEST("nat-network-forward-nat-address"); DO_TEST("nat-network-forward-nat-no-address"); DO_TEST("8021Qbh-net"); -- 2.9.3

2 3

Re: [libvirt] [libvirt-users] [RFC] per-device metadata
by Francesco Romani 21 Mar '17

21 Mar '17

(CC devel list - better late than never) On 03/16/2017 04:23 PM, Daniel P. Berrange wrote: > On Thu, Mar 16, 2017 at 04:17:51PM +0100, Peter Krempa wrote: >> On Thu, Mar 16, 2017 at 14:52:47 +0000, Daniel Berrange wrote: >>> On Thu, Mar 16, 2017 at 03:50:51PM +0100, Peter Krempa wrote: >>>> On Thu, Mar 16, 2017 at 14:42:30 +0000, Daniel Berrange wrote: >>>>> On Thu, Mar 16, 2017 at 01:46:38PM +0100, Peter Krempa wrote: >>>>>> On Mon, Feb 27, 2017 at 16:41:28 +0100, Francesco Romani wrote: >> [...] >> >>> The scenario where device attach fails is not the problem - you can >>> get the same level of reliabilty to that by simply updating the >>> global metadata before & after hotplug in the same way. What is >>> difficult is when libvirt fails to persist the XML config on disk >>> or when libvirt crashes part way through the operation, and other >>> akward failure scenarios unrelated to QEMU itself. >> In that case you lose the device definition too, since saving the XML is >> the integral part of the hotplug operation. > Agreed, but that just re-inforces my view that we don't need to provide > extra metadata against the device for sake of atomicity. Even the existing > hotplug doesn't guarantee any kind of atomicity, so you're not making life > worse by performing a separate API call to update the global metadata. > > > Regards, > Daniel Thanks everyone, I will file a bug so we can move forward on this. Bests, -- Francesco Romani Red Hat Engineering Virtualization R & D IRC: fromani

1 0

[libvirt] [PATCH] tests: update QEMU 2.9.0 caps data
by Pavel Hrdina 21 Mar '17

21 Mar '17

Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- .../qemucapabilitiesdata/caps_2.9.0.x86_64.replies | 3701 +++++++++++--------- tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 7 +- 2 files changed, 2122 insertions(+), 1586 deletions(-) diff --git a/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.replies b/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.replies index f6109513a2..b6fd75090c 100644 --- a/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.replies +++ b/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.replies @@ -2,11 +2,11 @@ "QMP": { "version": { "qemu": { - "micro": 50, + "micro": 90, "minor": 8, "major": 2 }, - "package": " (v2.8.0-1961-g5b10b94bd5)" + "package": " (v2.9.0-rc0-142-g940a8ce)" }, "capabilities": [ ] @@ -22,11 +22,11 @@ { "return": { "qemu": { - "micro": 50, + "micro": 90, "minor": 8, "major": 2 }, - "package": " (v2.8.0-1961-g5b10b94bd5)" + "package": " (v2.9.0-rc0-142-g940a8ce)" }, "id": "libvirt-2" } @@ -41,6 +41,18 @@ { "return": [ { + "name": "netdev_add" + }, + { + "name": "device_add" + }, + { + "name": "query-qmp-schema" + }, + { + "name": "xen-set-replication" + }, + { "name": "xen-set-global-dirty-log" }, { @@ -50,6 +62,9 @@ "name": "xen-load-devices-state" }, { + "name": "xen-colo-do-checkpoint" + }, + { "name": "x-colo-lost-heartbeat" }, { @@ -113,12 +128,18 @@ "name": "quit" }, { + "name": "query-xen-replication-status" + }, + { "name": "query-vnc-servers" }, { "name": "query-vnc" }, { + "name": "query-vm-generation-id" + }, + { "name": "query-version" }, { @@ -456,15 +477,6 @@ }, { "name": "add-fd" - }, - { - "name": "netdev_add" - }, - { - "name": "device_add" - }, - { - "name": "query-qmp-schema" } ], "id": "libvirt-4" @@ -710,6 +722,9 @@ "name": "secret" }, { + "name": "qio-channel-tls" + }, + { "name": "filter-buffer" }, { @@ -746,12 +761,12 @@ "name": "pci-serial-2x" }, { - "name": "scsi-generic" - }, - { "name": "piix4-ide" }, { + "name": "scsi-generic" + }, + { "name": "pc-1.0-machine" }, { @@ -773,12 +788,15 @@ "name": "pc-i440fx-2.1-machine" }, { - "name": "virtio-mouse-device" - }, - { "name": "virtio-mouse-pci" }, { + "name": "virtio-mouse-device" + }, + { + "name": "isa-ipmi-bt" + }, + { "name": "isa-debugcon" }, { @@ -794,9 +812,6 @@ "name": "qemu64-x86_64-cpu" }, { - "name": "isa-ipmi-bt" - }, - { "name": "rng-egd" }, { @@ -989,6 +1004,9 @@ "name": "core2duo-x86_64-cpu" }, { + "name": "qio-channel-command" + }, + { "name": "virtio-9p-pci" }, { @@ -1163,18 +1181,18 @@ "name": "isa-ipmi-kcs" }, { - "name": "isa-ide" - }, - { - "name": "rng-random" - }, - { "name": "virtio-crypto-pci" }, { + "name": "rng-random" + }, + { "name": "isa-vga" }, { + "name": "isa-ide" + }, + { "name": "virtio-keyboard-device" }, { @@ -1244,7 +1262,7 @@ "name": "chardev-gdb" }, { - "name": "qio-channel-command" + "name": "virtio-pci-bus" }, { "name": "chardev-vc" @@ -1283,6 +1301,9 @@ "name": "phenom-x86_64-cpu" }, { + "name": "usb-ccid" + }, + { "name": "fw_cfg_io" }, { @@ -1304,6 +1325,9 @@ "name": "nvme" }, { + "name": "chardev-wctablet" + }, + { "name": "i82801b11-bridge" }, { @@ -1313,7 +1337,7 @@ "name": "usb-tablet" }, { - "name": "usb-ccid" + "name": "usb-bot" }, { "name": "sdhci-bus" @@ -1337,9 +1361,6 @@ "name": "tcg-accel" }, { - "name": "usb-bot" - }, - { "name": "isa-cirrus-vga" }, { @@ -1382,6 +1403,9 @@ "name": "nvdimm" }, { + "name": "x3130-upstream" + }, + { "name": "ich9-usb-uhci6" }, { @@ -1394,9 +1418,6 @@ "name": "virtio-balloon-device" }, { - "name": "x3130-upstream" - }, - { "name": "ich9-usb-uhci5" }, { @@ -1565,7 +1586,7 @@ "name": "xen-backend" }, { - "name": "qio-channel-tls" + "name": "usb-redir" }, { "name": "virtio-serial-pci" @@ -1601,7 +1622,7 @@ "name": "chardev-parallel" }, { - "name": "virtio-pci-bus" + "name": "qemu-xhci" }, { "name": "pxb" @@ -1619,7 +1640,7 @@ "name": "kvm64-x86_64-cpu" }, { - "name": "usb-redir" + "name": "usb-storage" }, { "name": "vt82c686b-usb-uhci" @@ -1628,7 +1649,7 @@ "name": "HDA" }, { - "name": "usb-storage" + "name": "vmgenid" }, { "name": "pc-1.3-machine" @@ -1823,11 +1844,20 @@ "type": "bool" }, { + "name": "x-pcie-lnkctl-init", + "description": "on/off", + "type": "bool" + }, + { "name": "werror", "description": "Error handling policy, report/ignore/enospc/stop/auto", "type": "BlockdevOnError" }, { + "name": "bootindex", + "type": "int32" + }, + { "name": "discard_granularity", "type": "uint32" }, @@ -1842,16 +1872,12 @@ "type": "bool" }, { - "name": "bootindex", - "type": "int32" - }, - { - "name": "x-pcie-lnksta-dllla", + "name": "x-pcie-deverr-init", "description": "on/off", "type": "bool" }, { - "name": "notify_on_empty", + "name": "x-pcie-pm-init", "description": "on/off", "type": "bool" }, @@ -1861,44 +1887,58 @@ "type": "bool" }, { - "name": "class", - "type": "uint32" - }, - { - "name": "migrate-extra", + "name": "x-pcie-lnksta-dllla", "description": "on/off", "type": "bool" }, { - "name": "addr", - "description": "Slot and optional function number, example: 06.0 or 06", - "type": "int32" - }, - { - "name": "modern-pio-notify", - "description": "on/off", + "name": "share-rw", "type": "bool" }, { - "name": "vectors", - "type": "uint32" - }, - { "name": "physical_block_size", "description": "A power of two between 512 and 32768", "type": "uint16" }, { - "name": "iommu_platform", - "description": "on/off", - "type": "bool" - }, - { "name": "config-wce", "description": "on/off", "type": "bool" }, { + "name": "class", + "type": "uint32" + }, + { + "name": "addr", + "description": "Slot and optional function number, example: 06.0 or 06", + "type": "int32" + }, + { + "name": "migrate-extra", + "description": "on/off", + "type": "bool" + }, + { + "name": "modern-pio-notify", + "description": "on/off", + "type": "bool" + }, + { + "name": "vectors", + "type": "uint32" + }, + { + "name": "iommu_platform", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "virtio-backend", "type": "child<virtio-blk-device>" }, @@ -1907,6 +1947,11 @@ "type": "bool" }, { + "name": "notify_on_empty", + "description": "on/off", + "type": "bool" + }, + { "name": "write-cache", "description": "on/off/auto", "type": "OnOffAuto" @@ -1916,20 +1961,20 @@ "type": "uint16" }, { - "name": "virtio-pci-bus-master-bug-migration", - "description": "on/off", - "type": "bool" - }, - { - "name": "ats", - "description": "on/off", - "type": "bool" - }, - { "name": "opt_io_size", "type": "uint32" }, { + "name": "ats", + "description": "on/off", + "type": "bool" + }, + { + "name": "virtio-pci-bus-master-bug-migration", + "description": "on/off", + "type": "bool" + }, + { "name": "romfile", "type": "str" } @@ -1940,26 +1985,16 @@ { "return": [ { - "name": "indirect_desc", + "name": "ctrl_mac_addr", "description": "on/off", "type": "bool" }, { - "name": "x-txtimer", - "type": "uint32" + "name": "romfile", + "type": "str" }, { - "name": "notify_on_empty", - "description": "on/off", - "type": "bool" - }, - { - "name": "guest_ufo", - "description": "on/off", - "type": "bool" - }, - { - "name": "mq", + "name": "x-pcie-lnksta-dllla", "description": "on/off", "type": "bool" }, @@ -1969,113 +2004,51 @@ "type": "bool" }, { - "name": "host_ecn", + "name": "notify_on_empty", "description": "on/off", "type": "bool" }, { - "name": "ioeventfd", + "name": "command_serr_enable", "description": "on/off", "type": "bool" }, { - "name": "tx", - "type": "str" - }, - { - "name": "multifunction", - "description": "on/off", - "type": "bool" - }, - { - "name": "rombar", - "type": "uint32" - }, - { - "name": "ctrl_rx_extra", - "description": "on/off", - "type": "bool" - }, - { - "name": "ctrl_vq", - "description": "on/off", - "type": "bool" - }, - { - "name": "mac", - "description": "Ethernet 6-byte MAC Address, example: 52:54:00:12:34:56", - "type": "str" - }, - { - "name": "rx_queue_size", - "type": "uint16" - }, - { - "name": "x-disable-pcie", + "name": "x-pcie-pm-init", "description": "on/off", "type": "bool" }, { - "name": "guest_tso6", + "name": "indirect_desc", "description": "on/off", "type": "bool" }, { - "name": "gso", - "description": "on/off", - "type": "bool" - }, - { - "name": "guest_ecn", - "description": "on/off", - "type": "bool" - }, - { - "name": "ctrl_rx", - "description": "on/off", - "type": "bool" - }, - { - "name": "guest_tso4", - "description": "on/off", - "type": "bool" - }, - { - "name": "disable-modern", - "type": "bool" - }, - { "name": "guest_csum", "description": "on/off", "type": "bool" }, { - "name": "guest_announce", + "name": "ctrl_rx", "description": "on/off", "type": "bool" }, { - "name": "disable-legacy", - "description": "on/off/auto", - "type": "OnOffAuto" - }, - { - "name": "command_serr_enable", + "name": "ctrl_vq", "description": "on/off", "type": "bool" }, { - "name": "x-txburst", + "name": "bootindex", "type": "int32" }, { - "name": "ctrl_vlan", + "name": "multifunction", "description": "on/off", "type": "bool" }, { - "name": "csum", - "description": "on/off", + "name": "disable-modern", "type": "bool" }, { @@ -2084,57 +2057,46 @@ "type": "bool" }, { - "name": "page-per-vq", - "description": "on/off", - "type": "bool" - }, - { - "name": "any_layout", - "description": "on/off", - "type": "bool" - }, - { - "name": "x-pcie-lnksta-dllla", - "description": "on/off", - "type": "bool" - }, - { - "name": "ctrl_guest_offloads", - "description": "on/off", - "type": "bool" - }, - { "name": "host_tso6", "description": "on/off", "type": "bool" }, { - "name": "bootindex", - "type": "int32" + "name": "x-txtimer", + "type": "uint32" }, { - "name": "ctrl_mac_addr", + "name": "host_tso4", "description": "on/off", "type": "bool" }, { - "name": "addr", - "description": "Slot and optional function number, example: 06.0 or 06", - "type": "int32" + "name": "rombar", + "type": "uint32" }, { - "name": "migrate-extra", + "name": "ctrl_rx_extra", "description": "on/off", "type": "bool" }, { - "name": "modern-pio-notify", + "name": "gso", "description": "on/off", "type": "bool" }, { - "name": "vectors", - "type": "uint32" + "name": "page-per-vq", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-disable-pcie", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-ignore-backend-features", + "type": "bool" }, { "name": "vlan", @@ -2142,12 +2104,25 @@ "type": "int32" }, { - "name": "host_tso4", + "name": "x-txburst", + "type": "int32" + }, + { + "name": "iommu_platform", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-lnkctl-init", "description": "on/off", "type": "bool" }, { - "name": "host_ufo", + "name": "host_mtu", + "type": "uint16" + }, + { + "name": "ctrl_vlan", "description": "on/off", "type": "bool" }, @@ -2156,7 +2131,116 @@ "type": "child<virtio-net-device>" }, { - "name": "x-ignore-backend-features", + "name": "event_idx", + "description": "on/off", + "type": "bool" + }, + { + "name": "vectors", + "type": "uint32" + }, + { + "name": "guest_announce", + "description": "on/off", + "type": "bool" + }, + { + "name": "host_ecn", + "description": "on/off", + "type": "bool" + }, + { + "name": "addr", + "description": "Slot and optional function number, example: 06.0 or 06", + "type": "int32" + }, + { + "name": "ats", + "description": "on/off", + "type": "bool" + }, + { + "name": "host_ufo", + "description": "on/off", + "type": "bool" + }, + { + "name": "guest_tso4", + "description": "on/off", + "type": "bool" + }, + { + "name": "guest_tso6", + "description": "on/off", + "type": "bool" + }, + { + "name": "ctrl_guest_offloads", + "description": "on/off", + "type": "bool" + }, + { + "name": "csum", + "description": "on/off", + "type": "bool" + }, + { + "name": "modern-pio-notify", + "description": "on/off", + "type": "bool" + }, + { + "name": "ioeventfd", + "description": "on/off", + "type": "bool" + }, + { + "name": "mq", + "description": "on/off", + "type": "bool" + }, + { + "name": "any_layout", + "description": "on/off", + "type": "bool" + }, + { + "name": "guest_ecn", + "description": "on/off", + "type": "bool" + }, + { + "name": "guest_ufo", + "description": "on/off", + "type": "bool" + }, + { + "name": "virtio-pci-bus-master-bug-migration", + "description": "on/off", + "type": "bool" + }, + { + "name": "mac", + "description": "Ethernet 6-byte MAC Address, example: 52:54:00:12:34:56", + "type": "str" + }, + { + "name": "disable-legacy", + "description": "on/off/auto", + "type": "OnOffAuto" + }, + { + "name": "tx", + "type": "str" + }, + { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-deverr-init", + "description": "on/off", "type": "bool" }, { @@ -2165,32 +2249,13 @@ "type": "str" }, { - "name": "event_idx", + "name": "migrate-extra", "description": "on/off", "type": "bool" }, { - "name": "host_mtu", + "name": "rx_queue_size", "type": "uint16" - }, - { - "name": "iommu_platform", - "description": "on/off", - "type": "bool" - }, - { - "name": "ats", - "description": "on/off", - "type": "bool" - }, - { - "name": "virtio-pci-bus-master-bug-migration", - "description": "on/off", - "type": "bool" - }, - { - "name": "romfile", - "type": "str" } ], "id": "libvirt-11" @@ -2228,18 +2293,18 @@ "type": "bool" }, { - "name": "disable-modern", - "type": "bool" - }, - { - "name": "num_queues", - "type": "uint32" - }, - { "name": "cmd_per_lun", "type": "uint32" }, { + "name": "disable-modern", + "type": "bool" + }, + { + "name": "num_queues", + "type": "uint32" + }, + { "name": "disable-legacy", "description": "on/off/auto", "type": "OnOffAuto" @@ -2250,7 +2315,7 @@ "type": "bool" }, { - "name": "page-per-vq", + "name": "x-pcie-lnkctl-init", "description": "on/off", "type": "bool" }, @@ -2260,6 +2325,21 @@ "type": "bool" }, { + "name": "page-per-vq", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-deverr-init", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-pm-init", + "description": "on/off", + "type": "bool" + }, + { "name": "x-pcie-lnksta-dllla", "description": "on/off", "type": "bool" @@ -2302,6 +2382,11 @@ "type": "uint32" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "virtio-backend", "type": "child<virtio-scsi-device>" }, @@ -2424,6 +2509,11 @@ "type": "str" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "command_serr_enable", "description": "on/off", "type": "bool" @@ -2524,6 +2614,11 @@ "type": "bool" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "addr", "description": "Slot and optional function number, example: 06.0 or 06", "type": "int32" @@ -2595,6 +2690,10 @@ "type": "OnOffAuto" }, { + "name": "share-rw", + "type": "bool" + }, + { "name": "opt_io_size", "type": "uint32" }, @@ -2684,6 +2783,10 @@ "type": "OnOffAuto" }, { + "name": "share-rw", + "type": "bool" + }, + { "name": "opt_io_size", "type": "uint32" }, @@ -2763,6 +2866,11 @@ "type": "uint8" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "command_serr_enable", "description": "on/off", "type": "bool" @@ -3080,6 +3188,10 @@ "type": "OnOffAuto" }, { + "name": "share-rw", + "type": "bool" + }, + { "name": "opt_io_size", "type": "uint32" }, @@ -3167,6 +3279,11 @@ "type": "uint32" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "command_serr_enable", "description": "on/off", "type": "bool" @@ -3205,6 +3322,11 @@ "type": "uint32" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "command_serr_enable", "description": "on/off", "type": "bool" @@ -3277,6 +3399,11 @@ "type": "uint32" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "guestdebug", "type": "uint32" }, @@ -3346,11 +3473,26 @@ "type": "bool" }, { + "name": "x-pcie-lnkctl-init", + "description": "on/off", + "type": "bool" + }, + { "name": "page-per-vq", "description": "on/off", "type": "bool" }, { + "name": "x-pcie-deverr-init", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-pm-init", + "description": "on/off", + "type": "bool" + }, + { "name": "max_outputs", "type": "uint32" }, @@ -3389,6 +3531,11 @@ "type": "bool" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "virtio-backend", "type": "child<virtio-gpu-device>" }, @@ -3532,22 +3679,27 @@ "type": "bool" }, { + "name": "disable_s3", + "type": "uint8" + }, + { "name": "romfile", "type": "str" }, { - "name": "disable_s3", - "type": "uint8" - }, - { - "name": "s4_val", - "type": "uint8" - }, - { "name": "acpi_enable_cmd", "type": "uint8" }, { + "name": "s4_val", + "type": "uint8" + }, + { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "command_serr_enable", "description": "on/off", "type": "bool" @@ -3618,6 +3770,11 @@ "type": "bool" }, { + "name": "x-pcie-lnkctl-init", + "description": "on/off", + "type": "bool" + }, + { "name": "guest-stats", "type": "guest statistics" }, @@ -3632,6 +3789,16 @@ "type": "bool" }, { + "name": "x-pcie-deverr-init", + "description": "on/off", + "type": "bool" + }, + { + "name": "x-pcie-pm-init", + "description": "on/off", + "type": "bool" + }, + { "name": "x-pcie-lnksta-dllla", "description": "on/off", "type": "bool" @@ -3661,6 +3828,11 @@ "type": "bool" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "virtio-backend", "type": "child<virtio-balloon-device>" }, @@ -3674,12 +3846,12 @@ "type": "bool" }, { - "name": "ats", + "name": "iommu_platform", "description": "on/off", "type": "bool" }, { - "name": "iommu_platform", + "name": "ats", "description": "on/off", "type": "bool" }, @@ -3803,6 +3975,11 @@ "type": "bool" }, { + "name": "x-pcie-extcap-init", + "description": "on/off", + "type": "bool" + }, + { "name": "addr", "description": "Slot and optional function number, example: 06.0 or 06", "type": "int32" @@ -4427,10 +4604,22 @@ { "parameters": [ { + "name": "rendernode", + "type": "string" + }, + { "name": "gl", "type": "boolean" }, { + "name": "head", + "type": "number" + }, + { + "name": "display", + "type": "string" + }, + { "name": "seamless-migration", "type": "boolean" }, @@ -4591,6 +4780,101 @@ { "parameters": [ { + "name": "throttling.iops-size", + "help": "when limiting by iops max size of an I/O in bytes", + "type": "number" + }, + { + "name": "throttling.bps-write-max-length", + "help": "length of the bps-write-max burst period, in seconds", + "type": "number" + }, + { + "name": "throttling.bps-read-max-length", + "help": "length of the bps-read-max burst period, in seconds", + "type": "number" + }, + { + "name": "throttling.bps-total-max-length", + "help": "length of the bps-total-max burst period, in seconds", + "type": "number" + }, + { + "name": "throttling.iops-write-max-length", + "help": "length of the iops-write-max burst period, in seconds", + "type": "number" + }, + { + "name": "throttling.iops-read-max-length", + "help": "length of the iops-read-max burst period, in seconds", + "type": "number" + }, + { + "name": "throttling.iops-total-max-length", + "help": "length of the iops-total-max burst period, in seconds", + "type": "number" + }, + { + "name": "throttling.bps-write-max", + "help": "total bytes write burst", + "type": "number" + }, + { + "name": "throttling.bps-read-max", + "help": "total bytes read burst", + "type": "number" + }, + { + "name": "throttling.bps-total-max", + "help": "total bytes burst", + "type": "number" + }, + { + "name": "throttling.iops-write-max", + "help": "I/O operations write burst", + "type": "number" + }, + { + "name": "throttling.iops-read-max", + "help": "I/O operations read burst", + "type": "number" + }, + { + "name": "throttling.iops-total-max", + "help": "I/O operations burst", + "type": "number" + }, + { + "name": "throttling.bps-write", + "help": "limit write bytes per second", + "type": "number" + }, + { + "name": "throttling.bps-read", + "help": "limit read bytes per second", + "type": "number" + }, + { + "name": "throttling.bps-total", + "help": "limit total bytes per second", + "type": "number" + }, + { + "name": "throttling.iops-write", + "help": "limit write operations per second", + "type": "number" + }, + { + "name": "throttling.iops-read", + "help": "limit read operations per second", + "type": "number" + }, + { + "name": "throttling.iops-total", + "help": "limit total I/O operations per second", + "type": "number" + }, + { "name": "sock_fd", "type": "number" }, @@ -4847,6 +5131,21 @@ { "parameters": [ { + "name": "thread", + "help": "Enable/disable multi-threaded TCG", + "type": "string" + }, + { + "name": "accel", + "help": "Select the type of accelerator", + "type": "string" + } + ], + "option": "accel" + }, + { + "parameters": [ + { "name": "dea-key-wrap", "help": "enable/disable DEA key wrapping using the CPACF wrapping key", "type": "boolean" @@ -6375,14 +6674,26 @@ "arg-type": "17" }, { - "name": "query-vnc", + "name": "query-vm-generation-id", "ret-type": "156", "meta-type": "command", "arg-type": "17" }, { + "name": "query-vnc", + "ret-type": "157", + "meta-type": "command", + "arg-type": "17" + }, + { "name": "query-vnc-servers", - "ret-type": "[157]", + "ret-type": "[158]", + "meta-type": "command", + "arg-type": "17" + }, + { + "name": "query-xen-replication-status", + "ret-type": "159", "meta-type": "command", "arg-type": "17" }, @@ -6396,19 +6707,19 @@ "name": "remove-fd", "ret-type": "17", "meta-type": "command", - "arg-type": "158" + "arg-type": "160" }, { "name": "ringbuf-read", "ret-type": "str", "meta-type": "command", - "arg-type": "159" + "arg-type": "161" }, { "name": "ringbuf-write", "ret-type": "17", "meta-type": "command", - "arg-type": "160" + "arg-type": "162" }, { "name": "rtc-reset-reinjection", @@ -6420,25 +6731,25 @@ "name": "screendump", "ret-type": "17", "meta-type": "command", - "arg-type": "161" + "arg-type": "163" }, { "name": "send-key", "ret-type": "17", "meta-type": "command", - "arg-type": "162" + "arg-type": "164" }, { "name": "set_link", "ret-type": "17", "meta-type": "command", - "arg-type": "163" + "arg-type": "165" }, { "name": "set_password", "ret-type": "17", "meta-type": "command", - "arg-type": "164" + "arg-type": "166" }, { "name": "stop", @@ -6466,45 +6777,45 @@ }, { "name": "trace-event-get-state", - "ret-type": "[166]", - "meta-type": "command", - "arg-type": "165" - }, - { - "name": "trace-event-set-state", - "ret-type": "17", + "ret-type": "[168]", "meta-type": "command", "arg-type": "167" }, { + "name": "trace-event-set-state", + "ret-type": "17", + "meta-type": "command", + "arg-type": "169" + }, + { "name": "transaction", "ret-type": "17", "meta-type": "command", - "arg-type": "168" + "arg-type": "170" }, { "name": "x-blockdev-change", "ret-type": "17", "meta-type": "command", - "arg-type": "169" + "arg-type": "171" }, { "name": "x-blockdev-del", "ret-type": "17", "meta-type": "command", - "arg-type": "170" + "arg-type": "172" }, { "name": "x-blockdev-insert-medium", "ret-type": "17", "meta-type": "command", - "arg-type": "171" + "arg-type": "173" }, { "name": "x-blockdev-remove-medium", "ret-type": "17", "meta-type": "command", - "arg-type": "172" + "arg-type": "174" }, { "name": "x-colo-lost-heartbeat", @@ -6513,22 +6824,34 @@ "arg-type": "17" }, { + "name": "xen-colo-do-checkpoint", + "ret-type": "17", + "meta-type": "command", + "arg-type": "17" + }, + { "name": "xen-load-devices-state", "ret-type": "17", "meta-type": "command", - "arg-type": "173" + "arg-type": "175" }, { "name": "xen-save-devices-state", "ret-type": "17", "meta-type": "command", - "arg-type": "174" + "arg-type": "176" }, { "name": "xen-set-global-dirty-log", "ret-type": "17", "meta-type": "command", - "arg-type": "175" + "arg-type": "177" + }, + { + "name": "xen-set-replication", + "ret-type": "17", + "meta-type": "command", + "arg-type": "178" }, { "name": "0", @@ -6596,11 +6919,11 @@ }, { "name": "operation", - "type": "176" + "type": "179" }, { "name": "action", - "type": "177" + "type": "180" }, { "name": "nospace", @@ -6619,7 +6942,7 @@ "members": [ { "name": "type", - "type": "178" + "type": "181" }, { "name": "device", @@ -6645,7 +6968,7 @@ "members": [ { "name": "type", - "type": "178" + "type": "181" }, { "name": "device", @@ -6680,11 +7003,11 @@ }, { "name": "operation", - "type": "176" + "type": "179" }, { "name": "action", - "type": "177" + "type": "180" } ], "meta-type": "object" @@ -6694,7 +7017,7 @@ "members": [ { "name": "type", - "type": "178" + "type": "181" }, { "name": "device", @@ -6786,12 +7109,12 @@ "members": [ { "name": "action", - "type": "179" + "type": "182" }, { "name": "info", "default": null, - "type": "180" + "type": "183" } ], "meta-type": "object" @@ -6815,7 +7138,7 @@ "members": [ { "name": "status", - "type": "181" + "type": "184" } ], "meta-type": "object" @@ -6874,7 +7197,7 @@ "members": [ { "name": "type", - "type": "182" + "type": "185" }, { "name": "error", @@ -6911,11 +7234,11 @@ "members": [ { "name": "server", - "type": "183" + "type": "186" }, { "name": "client", - "type": "183" + "type": "186" } ], "meta-type": "object" @@ -6925,11 +7248,11 @@ "members": [ { "name": "server", - "type": "183" + "type": "186" }, { "name": "client", - "type": "183" + "type": "186" } ], "meta-type": "object" @@ -6939,25 +7262,25 @@ "members": [ { "name": "server", - "type": "184" - }, - { - "name": "client", - "type": "185" - } - ], - "meta-type": "object" - }, - { - "name": "24", - "members": [ - { - "name": "server", - "type": "186" - }, - { - "name": "client", "type": "187" + }, + { + "name": "client", + "type": "188" + } + ], + "meta-type": "object" + }, + { + "name": "24", + "members": [ + { + "name": "server", + "type": "189" + }, + { + "name": "client", + "type": "190" } ], "meta-type": "object" @@ -6967,11 +7290,11 @@ "members": [ { "name": "server", - "type": "186" + "type": "189" }, { "name": "client", - "type": "188" + "type": "191" } ], "meta-type": "object" @@ -6981,11 +7304,11 @@ "members": [ { "name": "server", - "type": "186" + "type": "189" }, { "name": "client", - "type": "188" + "type": "191" } ], "meta-type": "object" @@ -7009,7 +7332,7 @@ "members": [ { "name": "action", - "type": "189" + "type": "192" } ], "meta-type": "object" @@ -7109,6 +7432,11 @@ "name": "speed", "default": null, "type": "int" + }, + { + "name": "filter-node-name", + "default": null, + "type": "str" } ], "meta-type": "object" @@ -7254,7 +7582,7 @@ { "name": "on-error", "default": null, - "type": "190" + "type": "193" } ], "meta-type": "object" @@ -7414,138 +7742,146 @@ "tag": "driver", "variants": [ { - "case": "archipelago", - "type": "195" - }, - { "case": "blkdebug", - "type": "196" + "type": "198" }, { "case": "blkverify", - "type": "197" + "type": "199" }, { "case": "bochs", - "type": "198" + "type": "200" }, { "case": "cloop", - "type": "198" + "type": "200" }, { "case": "dmg", - "type": "198" + "type": "200" }, { "case": "file", - "type": "199" + "type": "201" }, { "case": "ftp", - "type": "200" + "type": "202" }, { "case": "ftps", - "type": "200" + "type": "202" }, { "case": "gluster", - "type": "201" + "type": "203" }, { "case": "host_cdrom", - "type": "199" + "type": "201" }, { "case": "host_device", - "type": "199" + "type": "201" }, { "case": "http", - "type": "200" + "type": "202" }, { "case": "https", - "type": "200" - }, - { - "case": "luks", "type": "202" }, { + "case": "iscsi", + "type": "204" + }, + { + "case": "luks", + "type": "205" + }, + { "case": "nbd", - "type": "203" + "type": "206" }, { "case": "nfs", - "type": "204" + "type": "207" }, { "case": "null-aio", - "type": "205" + "type": "208" }, { "case": "null-co", - "type": "205" + "type": "208" }, { "case": "parallels", - "type": "198" + "type": "200" }, { "case": "qcow2", - "type": "206" + "type": "209" }, { "case": "qcow", - "type": "207" + "type": "210" }, { "case": "qed", - "type": "207" + "type": "210" }, { "case": "quorum", - "type": "208" + "type": "211" }, { "case": "raw", - "type": "209" + "type": "212" + }, + { + "case": "rbd", + "type": "213" }, { "case": "replication", - "type": "210" + "type": "214" + }, + { + "case": "sheepdog", + "type": "215" }, { "case": "ssh", - "type": "211" + "type": "216" }, { "case": "vdi", - "type": "198" + "type": "200" }, { "case": "vhdx", - "type": "198" + "type": "200" }, { "case": "vmdk", - "type": "207" + "type": "210" }, { "case": "vpc", - "type": "198" + "type": "200" }, { "case": "vvfat", - "type": "212" + "type": "217" } ], "members": [ { "name": "driver", - "type": "191" + "type": "194" }, { "name": "node-name", @@ -7555,12 +7891,12 @@ { "name": "discard", "default": null, - "type": "192" + "type": "195" }, { "name": "cache", "default": null, - "type": "193" + "type": "196" }, { "name": "read-only", @@ -7570,7 +7906,7 @@ { "name": "detect-zeroes", "default": null, - "type": "194" + "type": "197" } ], "meta-type": "object" @@ -7593,7 +7929,7 @@ }, { "name": "sync", - "type": "213" + "type": "218" }, { "name": "speed", @@ -7608,12 +7944,12 @@ { "name": "on-source-error", "default": null, - "type": "190" + "type": "193" }, { "name": "on-target-error", "default": null, - "type": "190" + "type": "193" } ], "meta-type": "object" @@ -7643,7 +7979,7 @@ { "name": "read-only-mode", "default": null, - "type": "214" + "type": "219" } ], "meta-type": "object" @@ -7687,7 +8023,7 @@ }, { "name": "sync", - "type": "213" + "type": "218" }, { "name": "speed", @@ -7707,12 +8043,17 @@ { "name": "on-source-error", "default": null, - "type": "190" + "type": "193" }, { "name": "on-target-error", "default": null, - "type": "190" + "type": "193" + }, + { + "name": "filter-node-name", + "default": null, + "type": "str" } ], "meta-type": "object" @@ -7850,7 +8191,7 @@ { "name": "mode", "default": null, - "type": "215" + "type": "220" } ], "meta-type": "object" @@ -7911,7 +8252,7 @@ }, { "name": "backend", - "type": "216" + "type": "221" } ], "meta-type": "object" @@ -8083,12 +8424,12 @@ }, { "name": "sync", - "type": "213" + "type": "218" }, { "name": "mode", "default": null, - "type": "215" + "type": "220" }, { "name": "speed", @@ -8108,12 +8449,12 @@ { "name": "on-source-error", "default": null, - "type": "190" + "type": "193" }, { "name": "on-target-error", "default": null, - "type": "190" + "type": "193" } ], "meta-type": "object" @@ -8151,12 +8492,12 @@ }, { "name": "sync", - "type": "213" + "type": "218" }, { "name": "mode", "default": null, - "type": "215" + "type": "220" }, { "name": "speed", @@ -8176,12 +8517,12 @@ { "name": "on-source-error", "default": null, - "type": "190" + "type": "193" }, { "name": "on-target-error", "default": null, - "type": "190" + "type": "193" }, { "name": "unmap", @@ -8220,7 +8561,7 @@ { "name": "format", "default": null, - "type": "217" + "type": "222" } ], "meta-type": "object" @@ -8315,7 +8656,7 @@ }, { "name": "events", - "type": "[218]" + "type": "[223]" } ], "meta-type": "object" @@ -8494,7 +8835,7 @@ "members": [ { "name": "addr", - "type": "219" + "type": "224" }, { "name": "tls-creds", @@ -8691,7 +9032,7 @@ }, { "name": "slot-type", - "type": "220" + "type": "225" }, { "name": "source", @@ -8751,12 +9092,12 @@ { "name": "io-status", "default": null, - "type": "221" + "type": "226" }, { "name": "dirty-bitmaps", "default": null, - "type": "[222]" + "type": "[227]" } ], "meta-type": "object" @@ -8799,7 +9140,7 @@ }, { "name": "io-status", - "type": "221" + "type": "226" }, { "name": "ready", @@ -8839,7 +9180,7 @@ }, { "name": "stats", - "type": "223" + "type": "228" }, { "name": "parent", @@ -8917,7 +9258,7 @@ }, { "name": "parameters", - "type": "[224]" + "type": "[229]" } ], "meta-type": "object" @@ -8975,11 +9316,11 @@ "members": [ { "name": "modela", - "type": "225" + "type": "230" }, { "name": "modelb", - "type": "225" + "type": "230" } ], "meta-type": "object" @@ -8989,7 +9330,7 @@ "members": [ { "name": "model", - "type": "225" + "type": "230" } ], "meta-type": "object" @@ -8999,11 +9340,11 @@ "members": [ { "name": "modela", - "type": "225" + "type": "230" }, { "name": "modelb", - "type": "225" + "type": "230" } ], "meta-type": "object" @@ -9013,7 +9354,7 @@ "members": [ { "name": "result", - "type": "226" + "type": "231" }, { "name": "responsible-properties", @@ -9027,11 +9368,11 @@ "members": [ { "name": "type", - "type": "227" + "type": "232" }, { "name": "model", - "type": "225" + "type": "230" } ], "meta-type": "object" @@ -9041,7 +9382,7 @@ "members": [ { "name": "model", - "type": "225" + "type": "230" } ], "meta-type": "object" @@ -9057,27 +9398,27 @@ "variants": [ { "case": "x86", - "type": "229" + "type": "234" }, { "case": "sparc", - "type": "230" + "type": "235" }, { "case": "ppc", - "type": "231" + "type": "236" }, { "case": "mips", - "type": "232" + "type": "237" }, { "case": "tricore", - "type": "233" + "type": "238" }, { "case": "other", - "type": "234" + "type": "239" } ], "members": [ @@ -9103,7 +9444,7 @@ }, { "name": "arch", - "type": "228" + "type": "233" } ], "meta-type": "object" @@ -9113,7 +9454,7 @@ "members": [ { "name": "status", - "type": "235" + "type": "240" }, { "name": "completed", @@ -9131,7 +9472,7 @@ "members": [ { "name": "formats", - "type": "[217]" + "type": "[222]" } ], "meta-type": "object" @@ -9165,7 +9506,7 @@ }, { "name": "fds", - "type": "[236]" + "type": "[241]" } ], "meta-type": "object" @@ -9211,7 +9552,7 @@ }, { "name": "props", - "type": "237" + "type": "242" }, { "name": "qom-path", @@ -9236,6 +9577,18 @@ { "name": "thread-id", "type": "int" + }, + { + "name": "poll-max-ns", + "type": "int" + }, + { + "name": "poll-grow", + "type": "int" + }, + { + "name": "poll-shrink", + "type": "int" } ], "meta-type": "object" @@ -9322,7 +9675,7 @@ }, { "name": "policy", - "type": "238" + "type": "243" } ], "meta-type": "object" @@ -9338,13 +9691,13 @@ "variants": [ { "case": "dimm", - "type": "240" + "type": "245" } ], "members": [ { "name": "type", - "type": "239" + "type": "244" } ], "meta-type": "object" @@ -9382,22 +9735,22 @@ { "name": "status", "default": null, - "type": "181" + "type": "184" }, { "name": "ram", "default": null, - "type": "241" + "type": "246" }, { "name": "disk", "default": null, - "type": "241" + "type": "246" }, { "name": "xbzrle-cache", "default": null, - "type": "242" + "type": "247" }, { "name": "total-time", @@ -9447,7 +9800,7 @@ "members": [ { "name": "capability", - "type": "243" + "type": "248" }, { "name": "state", @@ -9511,7 +9864,7 @@ }, { "name": "detect_zeroes", - "type": "194" + "type": "197" }, { "name": "bps", @@ -9539,7 +9892,7 @@ }, { "name": "image", - "type": "244" + "type": "249" }, { "name": "bps_max", @@ -9613,7 +9966,7 @@ }, { "name": "cache", - "type": "245" + "type": "250" }, { "name": "write_threshold", @@ -9636,7 +9989,7 @@ }, { "name": "devices", - "type": "[246]" + "type": "[251]" } ], "meta-type": "object" @@ -9652,31 +10005,31 @@ "variants": [ { "case": "builtin", - "type": "248" + "type": "253" }, { "case": "enum", - "type": "249" + "type": "254" }, { "case": "array", - "type": "250" + "type": "255" }, { "case": "object", - "type": "251" + "type": "256" }, { "case": "alternate", - "type": "252" + "type": "257" }, { "case": "command", - "type": "253" + "type": "258" }, { "case": "event", - "type": "254" + "type": "259" } ], "members": [ @@ -9686,7 +10039,7 @@ }, { "name": "meta-type", - "type": "247" + "type": "252" } ], "meta-type": "object" @@ -9752,15 +10105,15 @@ }, { "name": "key", - "type": "255" + "type": "260" }, { "name": "mask", - "type": "256" + "type": "261" }, { "name": "action", - "type": "257" + "type": "262" } ], "meta-type": "object" @@ -9890,11 +10243,11 @@ }, { "name": "duplex", - "type": "258" + "type": "263" }, { "name": "autoneg", - "type": "259" + "type": "264" } ], "meta-type": "object" @@ -9928,15 +10281,15 @@ }, { "name": "multicast", - "type": "260" + "type": "265" }, { "name": "unicast", - "type": "260" + "type": "265" }, { "name": "vlan", - "type": "260" + "type": "265" }, { "name": "broadcast-allowed", @@ -10007,12 +10360,12 @@ }, { "name": "mouse-mode", - "type": "261" + "type": "266" }, { "name": "channels", "default": null, - "type": "[185]" + "type": "[188]" } ], "meta-type": "object" @@ -10030,7 +10383,7 @@ }, { "name": "status", - "type": "262" + "type": "267" } ], "meta-type": "object" @@ -10063,7 +10416,7 @@ }, { "name": "options", - "type": "263" + "type": "268" } ], "meta-type": "object" @@ -10107,7 +10460,7 @@ "members": [ { "name": "qemu", - "type": "264" + "type": "269" }, { "name": "package", @@ -10120,85 +10473,80 @@ "name": "156", "members": [ { - "name": "enabled", - "type": "bool" - }, - { - "name": "host", - "default": null, + "name": "guid", "type": "str" - }, - { - "name": "family", - "default": null, - "type": "265" - }, - { - "name": "service", - "default": null, - "type": "str" - }, - { - "name": "auth", - "default": null, - "type": "str" - }, - { - "name": "clients", - "default": null, - "type": "[188]" } ], "meta-type": "object" }, { - "name": "[157]", - "element-type": "157", - "meta-type": "array" - }, - { "name": "157", "members": [ { - "name": "id", + "name": "enabled", + "type": "bool" + }, + { + "name": "host", + "default": null, "type": "str" }, { - "name": "server", - "type": "[266]" + "name": "family", + "default": null, + "type": "270" }, { - "name": "clients", - "type": "[188]" + "name": "service", + "default": null, + "type": "str" }, { "name": "auth", - "type": "267" - }, - { - "name": "vencrypt", - "default": null, - "type": "268" - }, - { - "name": "display", "default": null, "type": "str" + }, + { + "name": "clients", + "default": null, + "type": "[191]" } ], "meta-type": "object" }, { + "name": "[158]", + "element-type": "158", + "meta-type": "array" + }, + { "name": "158", "members": [ { - "name": "fdset-id", - "type": "int" + "name": "id", + "type": "str" }, { - "name": "fd", + "name": "server", + "type": "[271]" + }, + { + "name": "clients", + "type": "[191]" + }, + { + "name": "auth", + "type": "272" + }, + { + "name": "vencrypt", + "default": null, + "type": "273" + }, + { + "name": "display", "default": null, - "type": "int" + "type": "str" } ], "meta-type": "object" @@ -10207,17 +10555,13 @@ "name": "159", "members": [ { - "name": "device", - "type": "str" + "name": "error", + "type": "bool" }, { - "name": "size", - "type": "int" - }, - { - "name": "format", + "name": "desc", "default": null, - "type": "269" + "type": "str" } ], "meta-type": "object" @@ -10226,17 +10570,13 @@ "name": "160", "members": [ { - "name": "device", - "type": "str" + "name": "fdset-id", + "type": "int" }, { - "name": "data", - "type": "str" - }, - { - "name": "format", + "name": "fd", "default": null, - "type": "269" + "type": "int" } ], "meta-type": "object" @@ -10245,8 +10585,17 @@ "name": "161", "members": [ { - "name": "filename", + "name": "device", "type": "str" + }, + { + "name": "size", + "type": "int" + }, + { + "name": "format", + "default": null, + "type": "274" } ], "meta-type": "object" @@ -10255,13 +10604,17 @@ "name": "162", "members": [ { - "name": "keys", - "type": "[270]" + "name": "device", + "type": "str" }, { - "name": "hold-time", + "name": "data", + "type": "str" + }, + { + "name": "format", "default": null, - "type": "int" + "type": "274" } ], "meta-type": "object" @@ -10270,12 +10623,8 @@ "name": "163", "members": [ { - "name": "name", + "name": "filename", "type": "str" - }, - { - "name": "up", - "type": "bool" } ], "meta-type": "object" @@ -10284,17 +10633,13 @@ "name": "164", "members": [ { - "name": "protocol", - "type": "str" + "name": "keys", + "type": "[275]" }, { - "name": "password", - "type": "str" - }, - { - "name": "connected", + "name": "hold-time", "default": null, - "type": "str" + "type": "int" } ], "meta-type": "object" @@ -10307,32 +10652,27 @@ "type": "str" }, { - "name": "vcpu", - "default": null, - "type": "int" + "name": "up", + "type": "bool" } ], "meta-type": "object" }, { - "name": "[166]", - "element-type": "166", - "meta-type": "array" - }, - { "name": "166", "members": [ { - "name": "name", + "name": "protocol", "type": "str" }, { - "name": "state", - "type": "271" + "name": "password", + "type": "str" }, { - "name": "vcpu", - "type": "bool" + "name": "connected", + "default": null, + "type": "str" } ], "meta-type": "object" @@ -10345,15 +10685,6 @@ "type": "str" }, { - "name": "enable", - "type": "bool" - }, - { - "name": "ignore-unavailable", - "default": null, - "type": "bool" - }, - { "name": "vcpu", "default": null, "type": "int" @@ -10362,16 +10693,24 @@ "meta-type": "object" }, { + "name": "[168]", + "element-type": "168", + "meta-type": "array" + }, + { "name": "168", "members": [ { - "name": "actions", - "type": "[272]" + "name": "name", + "type": "str" }, { - "name": "properties", - "default": null, - "type": "273" + "name": "state", + "type": "276" + }, + { + "name": "vcpu", + "type": "bool" } ], "meta-type": "object" @@ -10380,18 +10719,22 @@ "name": "169", "members": [ { - "name": "parent", + "name": "name", "type": "str" }, { - "name": "child", + "name": "enable", + "type": "bool" + }, + { + "name": "ignore-unavailable", "default": null, - "type": "str" + "type": "bool" }, { - "name": "node", + "name": "vcpu", "default": null, - "type": "str" + "type": "int" } ], "meta-type": "object" @@ -10400,8 +10743,13 @@ "name": "170", "members": [ { - "name": "node-name", - "type": "str" + "name": "actions", + "type": "[277]" + }, + { + "name": "properties", + "default": null, + "type": "278" } ], "meta-type": "object" @@ -10410,17 +10758,17 @@ "name": "171", "members": [ { - "name": "device", - "default": null, + "name": "parent", "type": "str" }, { - "name": "id", + "name": "child", "default": null, "type": "str" }, { - "name": "node-name", + "name": "node", + "default": null, "type": "str" } ], @@ -10430,13 +10778,7 @@ "name": "172", "members": [ { - "name": "device", - "default": null, - "type": "str" - }, - { - "name": "id", - "default": null, + "name": "node-name", "type": "str" } ], @@ -10446,7 +10788,17 @@ "name": "173", "members": [ { - "name": "filename", + "name": "device", + "default": null, + "type": "str" + }, + { + "name": "id", + "default": null, + "type": "str" + }, + { + "name": "node-name", "type": "str" } ], @@ -10456,7 +10808,13 @@ "name": "174", "members": [ { - "name": "filename", + "name": "device", + "default": null, + "type": "str" + }, + { + "name": "id", + "default": null, "type": "str" } ], @@ -10466,6 +10824,26 @@ "name": "175", "members": [ { + "name": "filename", + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "176", + "members": [ + { + "name": "filename", + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "177", + "members": [ + { "name": "enable", "type": "bool" } @@ -10473,12 +10851,31 @@ "meta-type": "object" }, { + "name": "178", + "members": [ + { + "name": "enable", + "type": "bool" + }, + { + "name": "primary", + "type": "bool" + }, + { + "name": "failover", + "default": null, + "type": "bool" + } + ], + "meta-type": "object" + }, + { "name": "bool", "json-type": "boolean", "meta-type": "builtin" }, { - "name": "176", + "name": "179", "meta-type": "enum", "values": [ "read", @@ -10486,7 +10883,7 @@ ] }, { - "name": "177", + "name": "180", "meta-type": "enum", "values": [ "ignore", @@ -10495,7 +10892,7 @@ ] }, { - "name": "178", + "name": "181", "meta-type": "enum", "values": [ "commit", @@ -10505,7 +10902,7 @@ ] }, { - "name": "179", + "name": "182", "meta-type": "enum", "values": [ "pause", @@ -10513,24 +10910,24 @@ ] }, { - "name": "180", + "name": "183", "tag": "type", "variants": [ { "case": "hyper-v", - "type": "275" + "type": "280" } ], "members": [ { "name": "type", - "type": "274" + "type": "279" } ], "meta-type": "object" }, { - "name": "181", + "name": "184", "meta-type": "enum", "values": [ "none", @@ -10545,7 +10942,7 @@ ] }, { - "name": "182", + "name": "185", "meta-type": "enum", "values": [ "read", @@ -10554,81 +10951,6 @@ ] }, { - "name": "183", - "members": [ - { - "name": "host", - "type": "str" - }, - { - "name": "port", - "type": "str" - }, - { - "name": "family", - "type": "265" - } - ], - "meta-type": "object" - }, - { - "name": "184", - "members": [ - { - "name": "host", - "type": "str" - }, - { - "name": "port", - "type": "str" - }, - { - "name": "family", - "type": "265" - }, - { - "name": "auth", - "default": null, - "type": "str" - } - ], - "meta-type": "object" - }, - { - "name": "185", - "members": [ - { - "name": "host", - "type": "str" - }, - { - "name": "port", - "type": "str" - }, - { - "name": "family", - "type": "265" - }, - { - "name": "connection-id", - "type": "int" - }, - { - "name": "channel-type", - "type": "int" - }, - { - "name": "channel-id", - "type": "int" - }, - { - "name": "tls", - "type": "bool" - } - ], - "meta-type": "object" - }, - { "name": "186", "members": [ { @@ -10636,21 +10958,12 @@ "type": "str" }, { - "name": "service", + "name": "port", "type": "str" }, { "name": "family", - "type": "265" - }, - { - "name": "websocket", - "type": "bool" - }, - { - "name": "auth", - "default": null, - "type": "str" + "type": "270" } ], "meta-type": "object" @@ -10663,16 +10976,17 @@ "type": "str" }, { - "name": "service", + "name": "port", "type": "str" }, { "name": "family", - "type": "265" + "type": "270" }, { - "name": "websocket", - "type": "bool" + "name": "auth", + "default": null, + "type": "str" } ], "meta-type": "object" @@ -10685,12 +10999,95 @@ "type": "str" }, { + "name": "port", + "type": "str" + }, + { + "name": "family", + "type": "270" + }, + { + "name": "connection-id", + "type": "int" + }, + { + "name": "channel-type", + "type": "int" + }, + { + "name": "channel-id", + "type": "int" + }, + { + "name": "tls", + "type": "bool" + } + ], + "meta-type": "object" + }, + { + "name": "189", + "members": [ + { + "name": "host", + "type": "str" + }, + { + "name": "service", + "type": "str" + }, + { + "name": "family", + "type": "270" + }, + { + "name": "websocket", + "type": "bool" + }, + { + "name": "auth", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "190", + "members": [ + { + "name": "host", + "type": "str" + }, + { + "name": "service", + "type": "str" + }, + { + "name": "family", + "type": "270" + }, + { + "name": "websocket", + "type": "bool" + } + ], + "meta-type": "object" + }, + { + "name": "191", + "members": [ + { + "name": "host", + "type": "str" + }, + { "name": "service", "type": "str" }, { "name": "family", - "type": "265" + "type": "270" }, { "name": "websocket", @@ -10710,7 +11107,7 @@ "meta-type": "object" }, { - "name": "189", + "name": "192", "meta-type": "enum", "values": [ "reset", @@ -10723,7 +11120,7 @@ ] }, { - "name": "190", + "name": "193", "meta-type": "enum", "values": [ "report", @@ -10734,10 +11131,9 @@ ] }, { - "name": "191", + "name": "194", "meta-type": "enum", "values": [ - "archipelago", "blkdebug", "blkverify", "bochs", @@ -10751,6 +11147,7 @@ "host_device", "http", "https", + "iscsi", "luks", "nbd", "nfs", @@ -10762,7 +11159,9 @@ "qed", "quorum", "raw", + "rbd", "replication", + "sheepdog", "ssh", "vdi", "vhdx", @@ -10772,69 +11171,44 @@ ] }, { - "name": "192", - "meta-type": "enum", - "values": [ - "ignore", - "unmap" - ] - }, - { - "name": "193", - "members": [ - { - "name": "direct", - "default": null, - "type": "bool" - }, - { - "name": "no-flush", - "default": null, - "type": "bool" - } - ], - "meta-type": "object" - }, - { - "name": "194", - "meta-type": "enum", - "values": [ - "off", - "on", - "unmap" - ] - }, - { "name": "195", - "members": [ - { - "name": "volume", - "type": "str" - }, - { - "name": "mport", - "default": null, - "type": "int" - }, - { - "name": "vport", - "default": null, - "type": "int" - }, - { - "name": "segment", - "default": null, - "type": "str" - } - ], - "meta-type": "object" + "meta-type": "enum", + "values": [ + "ignore", + "unmap" + ] }, { "name": "196", "members": [ { + "name": "direct", + "default": null, + "type": "bool" + }, + { + "name": "no-flush", + "default": null, + "type": "bool" + } + ], + "meta-type": "object" + }, + { + "name": "197", + "meta-type": "enum", + "values": [ + "off", + "on", + "unmap" + ] + }, + { + "name": "198", + "members": [ + { "name": "image", - "type": "276" + "type": "281" }, { "name": "config", @@ -10849,51 +11223,26 @@ { "name": "inject-error", "default": null, - "type": "[277]" + "type": "[282]" }, { "name": "set-state", "default": null, - "type": "[278]" + "type": "[283]" } ], "meta-type": "object" }, { - "name": "197", + "name": "199", "members": [ { "name": "test", - "type": "276" + "type": "281" }, { "name": "raw", - "type": "276" - } - ], - "meta-type": "object" - }, - { - "name": "198", - "members": [ - { - "name": "file", - "type": "276" - } - ], - "meta-type": "object" - }, - { - "name": "199", - "members": [ - { - "name": "filename", - "type": "str" - }, - { - "name": "aio", - "default": null, - "type": "279" + "type": "281" } ], "meta-type": "object" @@ -10902,8 +11251,8 @@ "name": "200", "members": [ { - "name": "filename", - "type": "str" + "name": "file", + "type": "281" } ], "meta-type": "object" @@ -10912,26 +11261,13 @@ "name": "201", "members": [ { - "name": "volume", + "name": "filename", "type": "str" }, { - "name": "path", - "type": "str" - }, - { - "name": "server", - "type": "[280]" - }, - { - "name": "debug", + "name": "aio", "default": null, - "type": "int" - }, - { - "name": "logfile", - "default": null, - "type": "str" + "type": "284" } ], "meta-type": "object" @@ -10940,12 +11276,7 @@ "name": "202", "members": [ { - "name": "file", - "type": "276" - }, - { - "name": "key-secret", - "default": null, + "name": "filename", "type": "str" } ], @@ -10955,16 +11286,24 @@ "name": "203", "members": [ { + "name": "volume", + "type": "str" + }, + { + "name": "path", + "type": "str" + }, + { "name": "server", - "type": "219" + "type": "[285]" }, { - "name": "export", + "name": "debug", "default": null, - "type": "str" + "type": "int" }, { - "name": "tls-creds", + "name": "logfile", "default": null, "type": "str" } @@ -10975,10 +11314,93 @@ "name": "204", "members": [ { - "name": "server", + "name": "transport", + "type": "286" + }, + { + "name": "portal", + "type": "str" + }, + { + "name": "target", + "type": "str" + }, + { + "name": "lun", + "default": null, + "type": "int" + }, + { + "name": "user", + "default": null, + "type": "str" + }, + { + "name": "password-secret", + "default": null, + "type": "str" + }, + { + "name": "initiator-name", + "default": null, + "type": "str" + }, + { + "name": "header-digest", + "default": null, + "type": "287" + }, + { + "name": "timeout", + "default": null, + "type": "int" + } + ], + "meta-type": "object" + }, + { + "name": "205", + "members": [ + { + "name": "file", "type": "281" }, { + "name": "key-secret", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "206", + "members": [ + { + "name": "server", + "type": "224" + }, + { + "name": "export", + "default": null, + "type": "str" + }, + { + "name": "tls-creds", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "207", + "members": [ + { + "name": "server", + "type": "288" + }, + { "name": "path", "type": "str" }, @@ -11016,7 +11438,7 @@ "meta-type": "object" }, { - "name": "205", + "name": "208", "members": [ { "name": "size", @@ -11032,16 +11454,16 @@ "meta-type": "object" }, { - "name": "206", + "name": "209", "members": [ { "name": "file", - "type": "276" + "type": "281" }, { "name": "backing", "default": null, - "type": "276" + "type": "281" }, { "name": "lazy-refcounts", @@ -11066,7 +11488,7 @@ { "name": "overlap-check", "default": null, - "type": "282" + "type": "289" }, { "name": "cache-size", @@ -11092,22 +11514,22 @@ "meta-type": "object" }, { - "name": "207", + "name": "210", "members": [ { "name": "file", - "type": "276" + "type": "281" }, { "name": "backing", "default": null, - "type": "276" + "type": "281" } ], "meta-type": "object" }, { - "name": "208", + "name": "211", "members": [ { "name": "blkverify", @@ -11116,7 +11538,7 @@ }, { "name": "children", - "type": "[276]" + "type": "[281]" }, { "name": "vote-threshold", @@ -11130,65 +11552,7 @@ { "name": "read-pattern", "default": null, - "type": "283" - } - ], - "meta-type": "object" - }, - { - "name": "209", - "members": [ - { - "name": "file", - "type": "276" - }, - { - "name": "offset", - "default": null, - "type": "int" - }, - { - "name": "size", - "default": null, - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "210", - "members": [ - { - "name": "file", - "type": "276" - }, - { - "name": "mode", - "type": "284" - }, - { - "name": "top-id", - "default": null, - "type": "str" - } - ], - "meta-type": "object" - }, - { - "name": "211", - "members": [ - { - "name": "server", - "type": "285" - }, - { - "name": "path", - "type": "str" - }, - { - "name": "user", - "default": null, - "type": "str" + "type": "290" } ], "meta-type": "object" @@ -11197,6 +11561,132 @@ "name": "212", "members": [ { + "name": "file", + "type": "281" + }, + { + "name": "offset", + "default": null, + "type": "int" + }, + { + "name": "size", + "default": null, + "type": "int" + } + ], + "meta-type": "object" + }, + { + "name": "213", + "members": [ + { + "name": "pool", + "type": "str" + }, + { + "name": "image", + "type": "str" + }, + { + "name": "conf", + "default": null, + "type": "str" + }, + { + "name": "snapshot", + "default": null, + "type": "str" + }, + { + "name": "user", + "default": null, + "type": "str" + }, + { + "name": "server", + "default": null, + "type": "[291]" + }, + { + "name": "auth-supported", + "default": null, + "type": "[292]" + }, + { + "name": "password-secret", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "214", + "members": [ + { + "name": "file", + "type": "281" + }, + { + "name": "mode", + "type": "293" + }, + { + "name": "top-id", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "215", + "members": [ + { + "name": "addr", + "type": "285" + }, + { + "name": "vdi", + "type": "str" + }, + { + "name": "snap-id", + "default": null, + "type": "int" + }, + { + "name": "tag", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "216", + "members": [ + { + "name": "server", + "type": "291" + }, + { + "name": "path", + "type": "str" + }, + { + "name": "user", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "217", + "members": [ + { "name": "dir", "type": "str" }, @@ -11224,7 +11714,7 @@ "meta-type": "object" }, { - "name": "213", + "name": "218", "meta-type": "enum", "values": [ "top", @@ -11234,7 +11724,7 @@ ] }, { - "name": "214", + "name": "219", "meta-type": "enum", "values": [ "retain", @@ -11243,7 +11733,7 @@ ] }, { - "name": "215", + "name": "220", "meta-type": "enum", "values": [ "existing", @@ -11251,96 +11741,100 @@ ] }, { - "name": "216", + "name": "221", "tag": "type", "variants": [ { "case": "file", - "type": "287" + "type": "295" }, { "case": "serial", - "type": "288" + "type": "296" }, { "case": "parallel", - "type": "288" + "type": "296" }, { "case": "pipe", - "type": "288" + "type": "296" }, { "case": "socket", - "type": "289" + "type": "297" }, { "case": "udp", - "type": "290" + "type": "298" }, { "case": "pty", - "type": "291" + "type": "299" }, { "case": "null", - "type": "291" + "type": "299" }, { "case": "mux", - "type": "292" + "type": "300" }, { "case": "msmouse", - "type": "291" + "type": "299" + }, + { + "case": "wctablet", + "type": "299" }, { "case": "braille", - "type": "291" + "type": "299" }, { "case": "testdev", - "type": "291" + "type": "299" }, { "case": "stdio", - "type": "293" + "type": "301" }, { "case": "console", - "type": "291" + "type": "299" }, { "case": "spicevmc", - "type": "294" + "type": "302" }, { "case": "spiceport", - "type": "295" + "type": "303" }, { "case": "vc", - "type": "296" + "type": "304" }, { "case": "ringbuf", - "type": "297" + "type": "305" }, { "case": "memory", - "type": "297" + "type": "305" } ], "members": [ { "name": "type", - "type": "286" + "type": "294" } ], "meta-type": "object" }, { - "name": "217", + "name": "222", "meta-type": "enum", "values": [ "elf", @@ -11350,35 +11844,35 @@ ] }, { - "name": "[218]", - "element-type": "218", + "name": "[223]", + "element-type": "223", "meta-type": "array" }, { - "name": "218", + "name": "223", "tag": "type", "variants": [ { "case": "key", - "type": "299" + "type": "307" }, { "case": "btn", - "type": "300" + "type": "308" }, { "case": "rel", - "type": "301" + "type": "309" }, { "case": "abs", - "type": "301" + "type": "309" } ], "members": [ { "name": "type", - "type": "298" + "type": "306" } ], "meta-type": "object" @@ -11389,36 +11883,36 @@ "meta-type": "builtin" }, { - "name": "219", + "name": "224", "tag": "type", "variants": [ { "case": "inet", - "type": "303" + "type": "311" }, { "case": "unix", - "type": "304" + "type": "312" }, { "case": "vsock", - "type": "305" + "type": "313" }, { "case": "fd", - "type": "306" + "type": "314" } ], "members": [ { "name": "type", - "type": "302" + "type": "310" } ], "meta-type": "object" }, { - "name": "220", + "name": "225", "meta-type": "enum", "values": [ "DIMM", @@ -11426,7 +11920,7 @@ ] }, { - "name": "221", + "name": "226", "meta-type": "enum", "values": [ "ok", @@ -11435,12 +11929,12 @@ ] }, { - "name": "[222]", - "element-type": "222", + "name": "[227]", + "element-type": "227", "meta-type": "array" }, { - "name": "222", + "name": "227", "members": [ { "name": "name", @@ -11457,13 +11951,13 @@ }, { "name": "status", - "type": "307" + "type": "315" } ], "meta-type": "object" }, { - "name": "223", + "name": "228", "members": [ { "name": "rd_bytes", @@ -11548,18 +12042,18 @@ }, { "name": "timed_stats", - "type": "[308]" + "type": "[316]" } ], "meta-type": "object" }, { - "name": "[224]", - "element-type": "224", + "name": "[229]", + "element-type": "229", "meta-type": "array" }, { - "name": "224", + "name": "229", "members": [ { "name": "name", @@ -11567,7 +12061,7 @@ }, { "name": "type", - "type": "309" + "type": "317" }, { "name": "help", @@ -11588,7 +12082,7 @@ "meta-type": "array" }, { - "name": "225", + "name": "230", "members": [ { "name": "name", @@ -11603,7 +12097,7 @@ "meta-type": "object" }, { - "name": "226", + "name": "231", "meta-type": "enum", "values": [ "incompatible", @@ -11613,7 +12107,7 @@ ] }, { - "name": "227", + "name": "232", "meta-type": "enum", "values": [ "static", @@ -11621,7 +12115,7 @@ ] }, { - "name": "228", + "name": "233", "meta-type": "enum", "values": [ "x86", @@ -11633,96 +12127,35 @@ ] }, { - "name": "229", - "members": [ - { - "name": "pc", - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "230", - "members": [ - { - "name": "pc", - "type": "int" - }, - { - "name": "npc", - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "231", - "members": [ - { - "name": "nip", - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "232", - "members": [ - { - "name": "PC", - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "233", - "members": [ - { - "name": "PC", - "type": "int" - } - ], - "meta-type": "object" - }, - { "name": "234", "members": [ + { + "name": "pc", + "type": "int" + } ], "meta-type": "object" }, { "name": "235", - "meta-type": "enum", - "values": [ - "none", - "active", - "completed", - "failed" - ] - }, - { - "name": "[217]", - "element-type": "217", - "meta-type": "array" - }, - { - "name": "[236]", - "element-type": "236", - "meta-type": "array" + "members": [ + { + "name": "pc", + "type": "int" + }, + { + "name": "npc", + "type": "int" + } + ], + "meta-type": "object" }, { "name": "236", "members": [ { - "name": "fd", + "name": "nip", "type": "int" - }, - { - "name": "opaque", - "default": null, - "type": "str" } ], "meta-type": "object" @@ -11731,6 +12164,67 @@ "name": "237", "members": [ { + "name": "PC", + "type": "int" + } + ], + "meta-type": "object" + }, + { + "name": "238", + "members": [ + { + "name": "PC", + "type": "int" + } + ], + "meta-type": "object" + }, + { + "name": "239", + "members": [ + ], + "meta-type": "object" + }, + { + "name": "240", + "meta-type": "enum", + "values": [ + "none", + "active", + "completed", + "failed" + ] + }, + { + "name": "[222]", + "element-type": "222", + "meta-type": "array" + }, + { + "name": "[241]", + "element-type": "241", + "meta-type": "array" + }, + { + "name": "241", + "members": [ + { + "name": "fd", + "type": "int" + }, + { + "name": "opaque", + "default": null, + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "242", + "members": [ + { "name": "node-id", "default": null, "type": "int" @@ -11759,7 +12253,7 @@ "meta-type": "array" }, { - "name": "238", + "name": "243", "meta-type": "enum", "values": [ "default", @@ -11769,24 +12263,24 @@ ] }, { - "name": "239", + "name": "244", "meta-type": "enum", "values": [ "dimm" ] }, { - "name": "240", + "name": "245", "members": [ { "name": "data", - "type": "310" + "type": "318" } ], "meta-type": "object" }, { - "name": "241", + "name": "246", "members": [ { "name": "transferred", @@ -11836,7 +12330,7 @@ "meta-type": "object" }, { - "name": "242", + "name": "247", "members": [ { "name": "cache-size", @@ -11866,7 +12360,7 @@ "meta-type": "object" }, { - "name": "243", + "name": "248", "meta-type": "enum", "values": [ "xbzrle", @@ -11881,7 +12375,7 @@ ] }, { - "name": "244", + "name": "249", "members": [ { "name": "filename", @@ -11943,18 +12437,18 @@ { "name": "backing-image", "default": null, - "type": "244" + "type": "249" }, { "name": "format-specific", "default": null, - "type": "311" + "type": "319" } ], "meta-type": "object" }, { - "name": "245", + "name": "250", "members": [ { "name": "writeback", @@ -11972,12 +12466,12 @@ "meta-type": "object" }, { - "name": "[246]", - "element-type": "246", + "name": "[251]", + "element-type": "251", "meta-type": "array" }, { - "name": "246", + "name": "251", "members": [ { "name": "bus", @@ -11993,11 +12487,11 @@ }, { "name": "class_info", - "type": "312" + "type": "320" }, { "name": "id", - "type": "313" + "type": "321" }, { "name": "irq", @@ -12011,17 +12505,17 @@ { "name": "pci_bridge", "default": null, - "type": "314" + "type": "322" }, { "name": "regions", - "type": "[315]" + "type": "[323]" } ], "meta-type": "object" }, { - "name": "247", + "name": "252", "meta-type": "enum", "values": [ "builtin", @@ -12034,17 +12528,17 @@ ] }, { - "name": "248", + "name": "253", "members": [ { "name": "json-type", - "type": "316" + "type": "324" } ], "meta-type": "object" }, { - "name": "249", + "name": "254", "members": [ { "name": "values", @@ -12054,7 +12548,7 @@ "meta-type": "object" }, { - "name": "250", + "name": "255", "members": [ { "name": "element-type", @@ -12064,11 +12558,11 @@ "meta-type": "object" }, { - "name": "251", + "name": "256", "members": [ { "name": "members", - "type": "[317]" + "type": "[325]" }, { "name": "tag", @@ -12078,23 +12572,23 @@ { "name": "variants", "default": null, - "type": "[318]" + "type": "[326]" } ], "meta-type": "object" }, { - "name": "252", + "name": "257", "members": [ { "name": "members", - "type": "[319]" + "type": "[327]" } ], "meta-type": "object" }, { - "name": "253", + "name": "258", "members": [ { "name": "arg-type", @@ -12108,7 +12602,7 @@ "meta-type": "object" }, { - "name": "254", + "name": "259", "members": [ { "name": "arg-type", @@ -12118,7 +12612,7 @@ "meta-type": "object" }, { - "name": "255", + "name": "260", "members": [ { "name": "priority", @@ -12177,7 +12671,7 @@ "meta-type": "object" }, { - "name": "256", + "name": "261", "members": [ { "name": "in-pport", @@ -12218,7 +12712,7 @@ "meta-type": "object" }, { - "name": "257", + "name": "262", "members": [ { "name": "goto-tbl", @@ -12254,7 +12748,7 @@ "meta-type": "object" }, { - "name": "258", + "name": "263", "meta-type": "enum", "values": [ "half", @@ -12262,7 +12756,7 @@ ] }, { - "name": "259", + "name": "264", "meta-type": "enum", "values": [ "off", @@ -12270,7 +12764,7 @@ ] }, { - "name": "260", + "name": "265", "meta-type": "enum", "values": [ "normal", @@ -12279,7 +12773,7 @@ ] }, { - "name": "261", + "name": "266", "meta-type": "enum", "values": [ "client", @@ -12288,12 +12782,12 @@ ] }, { - "name": "[185]", - "element-type": "185", + "name": "[188]", + "element-type": "188", "meta-type": "array" }, { - "name": "262", + "name": "267", "meta-type": "enum", "values": [ "debug", @@ -12315,24 +12809,24 @@ ] }, { - "name": "263", + "name": "268", "tag": "type", "variants": [ { "case": "passthrough", - "type": "321" + "type": "329" } ], "members": [ { "name": "type", - "type": "320" + "type": "328" } ], "meta-type": "object" }, { - "name": "264", + "name": "269", "members": [ { "name": "major", @@ -12350,7 +12844,7 @@ "meta-type": "object" }, { - "name": "265", + "name": "270", "meta-type": "enum", "values": [ "ipv4", @@ -12361,17 +12855,17 @@ ] }, { - "name": "[188]", - "element-type": "188", + "name": "[191]", + "element-type": "191", "meta-type": "array" }, { - "name": "[266]", - "element-type": "266", + "name": "[271]", + "element-type": "271", "meta-type": "array" }, { - "name": "266", + "name": "271", "members": [ { "name": "host", @@ -12383,7 +12877,7 @@ }, { "name": "family", - "type": "265" + "type": "270" }, { "name": "websocket", @@ -12391,18 +12885,18 @@ }, { "name": "auth", - "type": "267" + "type": "272" }, { "name": "vencrypt", "default": null, - "type": "268" + "type": "273" } ], "meta-type": "object" }, { - "name": "267", + "name": "272", "meta-type": "enum", "values": [ "none", @@ -12417,7 +12911,7 @@ ] }, { - "name": "268", + "name": "273", "meta-type": "enum", "values": [ "plain", @@ -12432,7 +12926,7 @@ ] }, { - "name": "269", + "name": "274", "meta-type": "enum", "values": [ "utf8", @@ -12440,33 +12934,33 @@ ] }, { - "name": "[270]", - "element-type": "270", + "name": "[275]", + "element-type": "275", "meta-type": "array" }, { - "name": "270", + "name": "275", "tag": "type", "variants": [ { "case": "number", - "type": "323" + "type": "331" }, { "case": "qcode", - "type": "324" + "type": "332" } ], "members": [ { "name": "type", - "type": "322" + "type": "330" } ], "meta-type": "object" }, { - "name": "271", + "name": "276", "meta-type": "enum", "values": [ "unavailable", @@ -12475,85 +12969,101 @@ ] }, { - "name": "[272]", - "element-type": "272", + "name": "[277]", + "element-type": "277", "meta-type": "array" }, { - "name": "272", + "name": "277", "tag": "type", "variants": [ { "case": "abort", - "type": "326" + "type": "334" }, { "case": "block-dirty-bitmap-add", - "type": "327" + "type": "335" }, { "case": "block-dirty-bitmap-clear", - "type": "328" + "type": "336" }, { "case": "blockdev-backup", - "type": "329" + "type": "337" }, { "case": "blockdev-snapshot", - "type": "330" + "type": "338" }, { "case": "blockdev-snapshot-internal-sync", - "type": "331" + "type": "339" }, { "case": "blockdev-snapshot-sync", - "type": "332" + "type": "340" }, { "case": "drive-backup", + "type": "341" + } + ], + "members": [ + { + "name": "type", "type": "333" } ], - "members": [ - { - "name": "type", - "type": "325" - } - ], "meta-type": "object" }, { - "name": "273", + "name": "278", "members": [ { "name": "completion-mode", "default": null, - "type": "334" + "type": "342" } ], "meta-type": "object" }, { - "name": "274", + "name": "279", "meta-type": "enum", "values": [ "hyper-v" ] }, { - "name": "275", + "name": "280", "members": [ { - "name": "data", - "type": "335" + "name": "arg1", + "type": "int" + }, + { + "name": "arg2", + "type": "int" + }, + { + "name": "arg3", + "type": "int" + }, + { + "name": "arg4", + "type": "int" + }, + { + "name": "arg5", + "type": "int" } ], "meta-type": "object" }, { - "name": "276", + "name": "281", "members": [ { "type": "46" @@ -12565,16 +13075,16 @@ "meta-type": "alternate" }, { - "name": "[277]", - "element-type": "277", + "name": "[282]", + "element-type": "282", "meta-type": "array" }, { - "name": "277", + "name": "282", "members": [ { "name": "event", - "type": "336" + "type": "343" }, { "name": "state", @@ -12605,16 +13115,16 @@ "meta-type": "object" }, { - "name": "[278]", - "element-type": "278", + "name": "[283]", + "element-type": "283", "meta-type": "array" }, { - "name": "278", + "name": "283", "members": [ { "name": "event", - "type": "336" + "type": "343" }, { "name": "state", @@ -12629,7 +13139,7 @@ "meta-type": "object" }, { - "name": "279", + "name": "284", "meta-type": "enum", "values": [ "threads", @@ -12637,37 +13147,55 @@ ] }, { - "name": "[280]", - "element-type": "280", + "name": "[285]", + "element-type": "285", "meta-type": "array" }, { - "name": "280", + "name": "285", "tag": "type", "variants": [ { "case": "unix", - "type": "338" + "type": "345" }, { - "case": "tcp", - "type": "285" + "case": "inet", + "type": "291" } ], "members": [ { "name": "type", - "type": "337" + "type": "344" } ], "meta-type": "object" }, { - "name": "281", + "name": "286", + "meta-type": "enum", + "values": [ + "tcp", + "iser" + ] + }, + { + "name": "287", + "meta-type": "enum", + "values": [ + "crc32c", + "none", + "crc32c-none", + "none-crc32c" + ] + }, + { + "name": "288", "members": [ { "name": "type", - "type": "339" + "type": "346" }, { "name": "host", @@ -12677,24 +13205,24 @@ "meta-type": "object" }, { - "name": "282", + "name": "289", "members": [ { - "type": "340" + "type": "347" }, { - "type": "341" + "type": "348" } ], "meta-type": "alternate" }, { - "name": "[276]", - "element-type": "276", + "name": "[281]", + "element-type": "281", "meta-type": "array" }, { - "name": "283", + "name": "290", "meta-type": "enum", "values": [ "quorum", @@ -12702,7 +13230,61 @@ ] }, { - "name": "284", + "name": "[291]", + "element-type": "291", + "meta-type": "array" + }, + { + "name": "291", + "members": [ + { + "name": "host", + "type": "str" + }, + { + "name": "port", + "type": "str" + }, + { + "name": "numeric", + "default": null, + "type": "bool" + }, + { + "name": "to", + "default": null, + "type": "int" + }, + { + "name": "ipv4", + "default": null, + "type": "bool" + }, + { + "name": "ipv6", + "default": null, + "type": "bool" + } + ], + "meta-type": "object" + }, + { + "name": "[292]", + "element-type": "292", + "meta-type": "array" + }, + { + "name": "292", + "members": [ + { + "name": "auth", + "type": "349" + } + ], + "meta-type": "object" + }, + { + "name": "293", "meta-type": "enum", "values": [ "primary", @@ -12710,41 +13292,7 @@ ] }, { - "name": "285", - "members": [ - { - "name": "host", - "type": "str" - }, - { - "name": "port", - "type": "str" - }, - { - "name": "numeric", - "default": null, - "type": "bool" - }, - { - "name": "to", - "default": null, - "type": "int" - }, - { - "name": "ipv4", - "default": null, - "type": "bool" - }, - { - "name": "ipv6", - "default": null, - "type": "bool" - } - ], - "meta-type": "object" - }, - { - "name": "286", + "name": "294", "meta-type": "enum", "values": [ "file", @@ -12757,6 +13305,7 @@ "null", "mux", "msmouse", + "wctablet", "braille", "testdev", "stdio", @@ -12769,86 +13318,6 @@ ] }, { - "name": "287", - "members": [ - { - "name": "data", - "type": "342" - } - ], - "meta-type": "object" - }, - { - "name": "288", - "members": [ - { - "name": "data", - "type": "343" - } - ], - "meta-type": "object" - }, - { - "name": "289", - "members": [ - { - "name": "data", - "type": "344" - } - ], - "meta-type": "object" - }, - { - "name": "290", - "members": [ - { - "name": "data", - "type": "345" - } - ], - "meta-type": "object" - }, - { - "name": "291", - "members": [ - { - "name": "data", - "type": "346" - } - ], - "meta-type": "object" - }, - { - "name": "292", - "members": [ - { - "name": "data", - "type": "347" - } - ], - "meta-type": "object" - }, - { - "name": "293", - "members": [ - { - "name": "data", - "type": "348" - } - ], - "meta-type": "object" - }, - { - "name": "294", - "members": [ - { - "name": "data", - "type": "349" - } - ], - "meta-type": "object" - }, - { "name": "295", "members": [ { @@ -12880,16 +13349,6 @@ }, { "name": "298", - "meta-type": "enum", - "values": [ - "key", - "btn", - "rel", - "abs" - ] - }, - { - "name": "299", "members": [ { "name": "data", @@ -12899,7 +13358,7 @@ "meta-type": "object" }, { - "name": "300", + "name": "299", "members": [ { "name": "data", @@ -12909,7 +13368,7 @@ "meta-type": "object" }, { - "name": "301", + "name": "300", "members": [ { "name": "data", @@ -12919,21 +13378,31 @@ "meta-type": "object" }, { + "name": "301", + "members": [ + { + "name": "data", + "type": "356" + } + ], + "meta-type": "object" + }, + { "name": "302", - "meta-type": "enum", - "values": [ - "inet", - "unix", - "vsock", - "fd" - ] + "members": [ + { + "name": "data", + "type": "357" + } + ], + "meta-type": "object" }, { "name": "303", "members": [ { "name": "data", - "type": "285" + "type": "358" } ], "meta-type": "object" @@ -12943,7 +13412,7 @@ "members": [ { "name": "data", - "type": "338" + "type": "359" } ], "meta-type": "object" @@ -12953,39 +13422,119 @@ "members": [ { "name": "data", - "type": "356" + "type": "360" } ], "meta-type": "object" }, { "name": "306", - "members": [ - { - "name": "data", - "type": "357" - } - ], - "meta-type": "object" + "meta-type": "enum", + "values": [ + "key", + "btn", + "rel", + "abs" + ] }, { "name": "307", - "meta-type": "enum", - "values": [ - "active", - "disabled", - "frozen" - ] - }, - { - "name": "[308]", - "element-type": "308", - "meta-type": "array" + "members": [ + { + "name": "data", + "type": "361" + } + ], + "meta-type": "object" }, { "name": "308", "members": [ { + "name": "data", + "type": "362" + } + ], + "meta-type": "object" + }, + { + "name": "309", + "members": [ + { + "name": "data", + "type": "363" + } + ], + "meta-type": "object" + }, + { + "name": "310", + "meta-type": "enum", + "values": [ + "inet", + "unix", + "vsock", + "fd" + ] + }, + { + "name": "311", + "members": [ + { + "name": "data", + "type": "291" + } + ], + "meta-type": "object" + }, + { + "name": "312", + "members": [ + { + "name": "data", + "type": "345" + } + ], + "meta-type": "object" + }, + { + "name": "313", + "members": [ + { + "name": "data", + "type": "364" + } + ], + "meta-type": "object" + }, + { + "name": "314", + "members": [ + { + "name": "data", + "type": "365" + } + ], + "meta-type": "object" + }, + { + "name": "315", + "meta-type": "enum", + "values": [ + "active", + "disabled", + "frozen" + ] + }, + { + "name": "[316]", + "element-type": "316", + "meta-type": "array" + }, + { + "name": "316", + "members": [ + { "name": "interval_length", "type": "int" }, @@ -13037,7 +13586,7 @@ "meta-type": "object" }, { - "name": "309", + "name": "317", "meta-type": "enum", "values": [ "string", @@ -13047,7 +13596,7 @@ ] }, { - "name": "310", + "name": "318", "members": [ { "name": "id", @@ -13091,32 +13640,32 @@ "meta-type": "array" }, { - "name": "311", + "name": "319", "tag": "type", "variants": [ { "case": "qcow2", - "type": "359" + "type": "367" }, { "case": "vmdk", - "type": "360" + "type": "368" }, { "case": "luks", - "type": "361" + "type": "369" } ], "members": [ { "name": "type", - "type": "358" + "type": "366" } ], "meta-type": "object" }, { - "name": "312", + "name": "320", "members": [ { "name": "desc", @@ -13131,7 +13680,7 @@ "meta-type": "object" }, { - "name": "313", + "name": "321", "members": [ { "name": "device", @@ -13145,27 +13694,27 @@ "meta-type": "object" }, { - "name": "314", + "name": "322", "members": [ { "name": "bus", - "type": "362" + "type": "370" }, { "name": "devices", "default": null, - "type": "[246]" + "type": "[251]" } ], "meta-type": "object" }, { - "name": "[315]", - "element-type": "315", + "name": "[323]", + "element-type": "323", "meta-type": "array" }, { - "name": "315", + "name": "323", "members": [ { "name": "bar", @@ -13197,7 +13746,7 @@ "meta-type": "object" }, { - "name": "316", + "name": "324", "meta-type": "enum", "values": [ "string", @@ -13211,12 +13760,12 @@ ] }, { - "name": "[317]", - "element-type": "317", + "name": "[325]", + "element-type": "325", "meta-type": "array" }, { - "name": "317", + "name": "325", "members": [ { "name": "name", @@ -13235,12 +13784,12 @@ "meta-type": "object" }, { - "name": "[318]", - "element-type": "318", + "name": "[326]", + "element-type": "326", "meta-type": "array" }, { - "name": "318", + "name": "326", "members": [ { "name": "case", @@ -13254,12 +13803,12 @@ "meta-type": "object" }, { - "name": "[319]", - "element-type": "319", + "name": "[327]", + "element-type": "327", "meta-type": "array" }, { - "name": "319", + "name": "327", "members": [ { "name": "type", @@ -13269,24 +13818,24 @@ "meta-type": "object" }, { - "name": "320", + "name": "328", "meta-type": "enum", "values": [ "passthrough" ] }, { - "name": "321", + "name": "329", "members": [ { "name": "data", - "type": "363" + "type": "371" } ], "meta-type": "object" }, { - "name": "322", + "name": "330", "meta-type": "enum", "values": [ "number", @@ -13294,7 +13843,7 @@ ] }, { - "name": "323", + "name": "331", "members": [ { "name": "data", @@ -13304,17 +13853,17 @@ "meta-type": "object" }, { - "name": "324", + "name": "332", "members": [ { "name": "data", - "type": "364" + "type": "372" } ], "meta-type": "object" }, { - "name": "325", + "name": "333", "meta-type": "enum", "values": [ "abort", @@ -13328,17 +13877,17 @@ ] }, { - "name": "326", + "name": "334", "members": [ { "name": "data", - "type": "365" + "type": "373" } ], "meta-type": "object" }, { - "name": "327", + "name": "335", "members": [ { "name": "data", @@ -13348,7 +13897,7 @@ "meta-type": "object" }, { - "name": "328", + "name": "336", "members": [ { "name": "data", @@ -13358,7 +13907,7 @@ "meta-type": "object" }, { - "name": "329", + "name": "337", "members": [ { "name": "data", @@ -13368,7 +13917,7 @@ "meta-type": "object" }, { - "name": "330", + "name": "338", "members": [ { "name": "data", @@ -13378,7 +13927,7 @@ "meta-type": "object" }, { - "name": "331", + "name": "339", "members": [ { "name": "data", @@ -13388,7 +13937,7 @@ "meta-type": "object" }, { - "name": "332", + "name": "340", "members": [ { "name": "data", @@ -13398,7 +13947,7 @@ "meta-type": "object" }, { - "name": "333", + "name": "341", "members": [ { "name": "data", @@ -13408,7 +13957,7 @@ "meta-type": "object" }, { - "name": "334", + "name": "342", "meta-type": "enum", "values": [ "individual", @@ -13416,33 +13965,7 @@ ] }, { - "name": "335", - "members": [ - { - "name": "arg1", - "type": "int" - }, - { - "name": "arg2", - "type": "int" - }, - { - "name": "arg3", - "type": "int" - }, - { - "name": "arg4", - "type": "int" - }, - { - "name": "arg5", - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "336", + "name": "343", "meta-type": "enum", "values": [ "l1_update", @@ -13491,15 +14014,15 @@ ] }, { - "name": "337", + "name": "344", "meta-type": "enum", "values": [ "unix", - "tcp" + "inet" ] }, { - "name": "338", + "name": "345", "members": [ { "name": "path", @@ -13509,19 +14032,19 @@ "meta-type": "object" }, { - "name": "339", + "name": "346", "meta-type": "enum", "values": [ "inet" ] }, { - "name": "340", + "name": "347", "members": [ { "name": "template", "default": null, - "type": "341" + "type": "348" }, { "name": "main-header", @@ -13567,7 +14090,7 @@ "meta-type": "object" }, { - "name": "341", + "name": "348", "meta-type": "enum", "values": [ "none", @@ -13577,206 +14100,12 @@ ] }, { - "name": "342", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "in", - "default": null, - "type": "str" - }, - { - "name": "out", - "type": "str" - }, - { - "name": "append", - "default": null, - "type": "bool" - } - ], - "meta-type": "object" - }, - { - "name": "343", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "device", - "type": "str" - } - ], - "meta-type": "object" - }, - { - "name": "344", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "addr", - "type": "219" - }, - { - "name": "tls-creds", - "default": null, - "type": "str" - }, - { - "name": "server", - "default": null, - "type": "bool" - }, - { - "name": "wait", - "default": null, - "type": "bool" - }, - { - "name": "nodelay", - "default": null, - "type": "bool" - }, - { - "name": "telnet", - "default": null, - "type": "bool" - }, - { - "name": "reconnect", - "default": null, - "type": "int" - } - ], - "meta-type": "object" - }, - { - "name": "345", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "remote", - "type": "219" - }, - { - "name": "local", - "default": null, - "type": "219" - } - ], - "meta-type": "object" - }, - { - "name": "346", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - } - ], - "meta-type": "object" - }, - { - "name": "347", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "chardev", - "type": "str" - } - ], - "meta-type": "object" - }, - { - "name": "348", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "signal", - "default": null, - "type": "bool" - } - ], - "meta-type": "object" - }, - { "name": "349", - "members": [ - { - "name": "logfile", - "default": null, - "type": "str" - }, - { - "name": "logappend", - "default": null, - "type": "bool" - }, - { - "name": "type", - "type": "str" - } - ], - "meta-type": "object" + "meta-type": "enum", + "values": [ + "cephx", + "none" + ] }, { "name": "350", @@ -13792,8 +14121,18 @@ "type": "bool" }, { - "name": "fqdn", + "name": "in", + "default": null, "type": "str" + }, + { + "name": "out", + "type": "str" + }, + { + "name": "append", + "default": null, + "type": "bool" } ], "meta-type": "object" @@ -13812,24 +14151,8 @@ "type": "bool" }, { - "name": "width", - "default": null, - "type": "int" - }, - { - "name": "height", - "default": null, - "type": "int" - }, - { - "name": "cols", - "default": null, - "type": "int" - }, - { - "name": "rows", - "default": null, - "type": "int" + "name": "device", + "type": "str" } ], "meta-type": "object" @@ -13848,7 +14171,36 @@ "type": "bool" }, { - "name": "size", + "name": "addr", + "type": "224" + }, + { + "name": "tls-creds", + "default": null, + "type": "str" + }, + { + "name": "server", + "default": null, + "type": "bool" + }, + { + "name": "wait", + "default": null, + "type": "bool" + }, + { + "name": "nodelay", + "default": null, + "type": "bool" + }, + { + "name": "telnet", + "default": null, + "type": "bool" + }, + { + "name": "reconnect", "default": null, "type": "int" } @@ -13859,12 +14211,23 @@ "name": "353", "members": [ { - "name": "key", - "type": "270" + "name": "logfile", + "default": null, + "type": "str" }, { - "name": "down", + "name": "logappend", + "default": null, "type": "bool" + }, + { + "name": "remote", + "type": "224" + }, + { + "name": "local", + "default": null, + "type": "224" } ], "meta-type": "object" @@ -13873,11 +14236,13 @@ "name": "354", "members": [ { - "name": "button", - "type": "366" + "name": "logfile", + "default": null, + "type": "str" }, { - "name": "down", + "name": "logappend", + "default": null, "type": "bool" } ], @@ -13887,12 +14252,18 @@ "name": "355", "members": [ { - "name": "axis", - "type": "367" + "name": "logfile", + "default": null, + "type": "str" }, { - "name": "value", - "type": "int" + "name": "logappend", + "default": null, + "type": "bool" + }, + { + "name": "chardev", + "type": "str" } ], "meta-type": "object" @@ -13901,12 +14272,19 @@ "name": "356", "members": [ { - "name": "cid", + "name": "logfile", + "default": null, "type": "str" }, { - "name": "port", - "type": "str" + "name": "logappend", + "default": null, + "type": "bool" + }, + { + "name": "signal", + "default": null, + "type": "bool" } ], "meta-type": "object" @@ -13915,7 +14293,17 @@ "name": "357", "members": [ { - "name": "str", + "name": "logfile", + "default": null, + "type": "str" + }, + { + "name": "logappend", + "default": null, + "type": "bool" + }, + { + "name": "type", "type": "str" } ], @@ -13923,19 +14311,56 @@ }, { "name": "358", - "meta-type": "enum", - "values": [ - "qcow2", - "vmdk", - "luks" - ] + "members": [ + { + "name": "logfile", + "default": null, + "type": "str" + }, + { + "name": "logappend", + "default": null, + "type": "bool" + }, + { + "name": "fqdn", + "type": "str" + } + ], + "meta-type": "object" }, { "name": "359", "members": [ { - "name": "data", - "type": "368" + "name": "logfile", + "default": null, + "type": "str" + }, + { + "name": "logappend", + "default": null, + "type": "bool" + }, + { + "name": "width", + "default": null, + "type": "int" + }, + { + "name": "height", + "default": null, + "type": "int" + }, + { + "name": "cols", + "default": null, + "type": "int" + }, + { + "name": "rows", + "default": null, + "type": "int" } ], "meta-type": "object" @@ -13944,8 +14369,19 @@ "name": "360", "members": [ { - "name": "data", - "type": "369" + "name": "logfile", + "default": null, + "type": "str" + }, + { + "name": "logappend", + "default": null, + "type": "bool" + }, + { + "name": "size", + "default": null, + "type": "int" } ], "meta-type": "object" @@ -13954,8 +14390,12 @@ "name": "361", "members": [ { - "name": "data", - "type": "370" + "name": "key", + "type": "275" + }, + { + "name": "down", + "type": "bool" } ], "meta-type": "object" @@ -13964,6 +14404,97 @@ "name": "362", "members": [ { + "name": "button", + "type": "374" + }, + { + "name": "down", + "type": "bool" + } + ], + "meta-type": "object" + }, + { + "name": "363", + "members": [ + { + "name": "axis", + "type": "375" + }, + { + "name": "value", + "type": "int" + } + ], + "meta-type": "object" + }, + { + "name": "364", + "members": [ + { + "name": "cid", + "type": "str" + }, + { + "name": "port", + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "365", + "members": [ + { + "name": "str", + "type": "str" + } + ], + "meta-type": "object" + }, + { + "name": "366", + "meta-type": "enum", + "values": [ + "qcow2", + "vmdk", + "luks" + ] + }, + { + "name": "367", + "members": [ + { + "name": "data", + "type": "376" + } + ], + "meta-type": "object" + }, + { + "name": "368", + "members": [ + { + "name": "data", + "type": "377" + } + ], + "meta-type": "object" + }, + { + "name": "369", + "members": [ + { + "name": "data", + "type": "378" + } + ], + "meta-type": "object" + }, + { + "name": "370", + "members": [ + { "name": "number", "type": "int" }, @@ -13977,21 +14508,21 @@ }, { "name": "io_range", - "type": "371" + "type": "379" }, { "name": "memory_range", - "type": "371" + "type": "379" }, { "name": "prefetchable_range", - "type": "371" + "type": "379" } ], "meta-type": "object" }, { - "name": "363", + "name": "371", "members": [ { "name": "path", @@ -14007,7 +14538,7 @@ "meta-type": "object" }, { - "name": "364", + "name": "372", "meta-type": "enum", "values": [ "unmapped", @@ -14143,13 +14674,13 @@ ] }, { - "name": "365", + "name": "373", "members": [ ], "meta-type": "object" }, { - "name": "366", + "name": "374", "meta-type": "enum", "values": [ "left", @@ -14162,7 +14693,7 @@ ] }, { - "name": "367", + "name": "375", "meta-type": "enum", "values": [ "x", @@ -14170,7 +14701,7 @@ ] }, { - "name": "368", + "name": "376", "members": [ { "name": "compat", @@ -14194,7 +14725,7 @@ "meta-type": "object" }, { - "name": "369", + "name": "377", "members": [ { "name": "create-type", @@ -14210,34 +14741,34 @@ }, { "name": "extents", - "type": "[244]" + "type": "[249]" } ], "meta-type": "object" }, { - "name": "370", + "name": "378", "members": [ { "name": "cipher-alg", - "type": "372" + "type": "380" }, { "name": "cipher-mode", - "type": "373" + "type": "381" }, { "name": "ivgen-alg", - "type": "374" + "type": "382" }, { "name": "ivgen-hash-alg", "default": null, - "type": "375" + "type": "383" }, { "name": "hash-alg", - "type": "375" + "type": "383" }, { "name": "payload-offset", @@ -14253,13 +14784,13 @@ }, { "name": "slots", - "type": "[376]" + "type": "[384]" } ], "meta-type": "object" }, { - "name": "371", + "name": "379", "members": [ { "name": "base", @@ -14273,12 +14804,12 @@ "meta-type": "object" }, { - "name": "[244]", - "element-type": "244", + "name": "[249]", + "element-type": "249", "meta-type": "array" }, { - "name": "372", + "name": "380", "meta-type": "enum", "values": [ "aes-128", @@ -14296,7 +14827,7 @@ ] }, { - "name": "373", + "name": "381", "meta-type": "enum", "values": [ "ecb", @@ -14306,7 +14837,7 @@ ] }, { - "name": "374", + "name": "382", "meta-type": "enum", "values": [ "plain", @@ -14315,7 +14846,7 @@ ] }, { - "name": "375", + "name": "383", "meta-type": "enum", "values": [ "md5", @@ -14328,12 +14859,12 @@ ] }, { - "name": "[376]", - "element-type": "376", + "name": "[384]", + "element-type": "384", "meta-type": "array" }, { - "name": "376", + "name": "384", "members": [ { "name": "active", @@ -14738,6 +15269,7 @@ "hv-vpindex": false, "xlevel2": 0, "clflushopt": true, + "kvm-no-smi-migration": false, "monitor": false, "avx512er": false, "pmm-en": false, @@ -15508,6 +16040,7 @@ "hv-vpindex": false, "xlevel2": 0, "clflushopt": true, + "kvm-no-smi-migration": false, "monitor": true, "avx512er": false, "pmm-en": false, diff --git a/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml b/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml index 000df939b1..f1adb4ddc9 100644 --- a/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml +++ b/tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml @@ -202,11 +202,12 @@ <flag name='drive-iotune-group'/> <flag name='query-cpu-model-expansion'/> <flag name='virtio-net.host_mtu'/> + <flag name='spice-rendernode'/> <flag name='pcie-root-port'/> <flag name='query-cpu-definitions'/> - <version>2008050</version> + <version>2008090</version> <kvmVersion>0</kvmVersion> - <package> (v2.8.0-1961-g5b10b94bd5)</package> + <package> (v2.9.0-rc0-142-g940a8ce)</package> <arch>x86_64</arch> <hostCPU type='kvm' model='base'> <property name='phys-bits' type='number' value='0'/> @@ -403,6 +404,7 @@ <property name='hv-vpindex' type='boolean' value='false'/> <property name='xlevel2' type='number' value='0'/> <property name='clflushopt' type='boolean' value='true'/> + <property name='kvm-no-smi-migration' type='boolean' value='false'/> <property name='monitor' type='boolean' value='false'/> <property name='avx512er' type='boolean' value='false'/> <property name='pmm-en' type='boolean' value='false'/> @@ -634,6 +636,7 @@ <property name='hv-vpindex' type='boolean' value='false'/> <property name='xlevel2' type='number' value='0'/> <property name='clflushopt' type='boolean' value='true'/> + <property name='kvm-no-smi-migration' type='boolean' value='false'/> <property name='monitor' type='boolean' value='true'/> <property name='avx512er' type='boolean' value='false'/> <property name='pmm-en' type='boolean' value='false'/> -- 2.12.0

2 1

[libvirt] [PATCH] news: Document "Enforce guest CPU specification" series
by Jiri Denemark 21 Mar '17

21 Mar '17

Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- docs/news.xml | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/docs/news.xml b/docs/news.xml index 3501f89ab..f1bfeda55 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -39,6 +39,19 @@ the QEMU binary supports it. </description> </change> + <change> + <summary> + qemu: Add support for checking guest CPU ABI compatibility + </summary> + <description> + When migrating a domain to a different host, restoring a domain from + a file or reverting a snapshot libvirt will make sure the guest CPU + QEMU presents to the guest OS exactly matches the one provided on + the source host (or before the domain's state was saved). This + enhanced check may also be requested when starting a new domain to + ensure the virtual CPU exactly matches the one specified in the XML. + </description> + </change> </section> <section title="Improvements"> <change> -- 2.12.0

2 1

[libvirt] [RFC PATCH v2 REBASE 00/18] Introduce vGPU mdev framework to libvirt
by Erik Skultety 21 Mar '17

21 Mar '17

since the original v2 [1]: - resolved a few merge conflicts caused by @9d92f533 which refactored out some duplicate code which eventually lead to dropping patch 14/18 from the original series due to being unnecessary - rebased onto fresh HEAD [1] https://www.redhat.com/archives/libvir-list/2017-February/msg00739.html Erik Skultety (18): util: Introduce new module virmdev conf: Introduce new hostdev device type mdev conf: Introduce new address type mdev conf: Update XML parser, formatter, and RNG schema to support mdev conf: Introduce virDomainHostdevDefPostParse conf: Add post parse code for mdevs to virDomainHostdevDefPostParse security: dac: Enable labeling of vfio mediated devices security: selinux: Enable labeling of vfio mediated devices conf: Enable cold-plug of a mediated device qemu: Assign PCI addresses for mediated devices as well hostdev: Maintain a driver list of active mediated devices hostdev: Introduce a reattach method for mediated devices qemu: cgroup: Adjust cgroups' logic to allow mediated devices qemu: Bump the memory locking limit for mdevs as well qemu: Format mdevs on qemu command line test: Add some test cases for our test suite regarding the mdevs docs: Document the new hostdev and address type 'mdev' news: Update the NEWS.xml about the new mdev feature docs/formatdomain.html.in | 48 ++- docs/news.xml | 9 + docs/schemas/domaincommon.rng | 26 ++ po/POTFILES.in | 1 + src/Makefile.am | 1 + src/conf/device_conf.h | 1 + src/conf/domain_conf.c | 203 ++++++++++-- src/conf/domain_conf.h | 9 + src/libvirt_private.syms | 20 ++ src/qemu/qemu_command.c | 49 +++ src/qemu/qemu_command.h | 5 + src/qemu/qemu_domain.c | 23 +- src/qemu/qemu_domain.h | 1 + src/qemu/qemu_domain_address.c | 16 +- src/qemu/qemu_hostdev.c | 37 +++ src/qemu/qemu_hostdev.h | 8 + src/qemu/qemu_hotplug.c | 2 + src/security/security_apparmor.c | 3 + src/security/security_dac.c | 55 ++++ src/security/security_selinux.c | 54 ++++ src/util/virhostdev.c | 229 ++++++++++++- src/util/virhostdev.h | 16 + src/util/virmdev.c | 358 +++++++++++++++++++++ src/util/virmdev.h | 93 ++++++ tests/domaincapsschemadata/full.xml | 1 + .../qemuxml2argv-hostdev-mdev-unmanaged.args | 25 ++ .../qemuxml2argv-hostdev-mdev-unmanaged.xml | 37 +++ tests/qemuxml2argvtest.c | 6 + .../qemuxml2xmlout-hostdev-mdev-unmanaged.xml | 40 +++ tests/qemuxml2xmltest.c | 1 + 30 files changed, 1333 insertions(+), 44 deletions(-) create mode 100644 src/util/virmdev.c create mode 100644 src/util/virmdev.h create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-mdev-unmanaged.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-mdev-unmanaged.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-hostdev-mdev-unmanaged.xml -- 2.10.2

8 45

[libvirt] [PATCH 00/11] storage: modularize the storage driver backends
by Peter Krempa 20 Mar '17

20 Mar '17

Split up the storage driver backends into loadable modules so that binary distributions don't have to compromise on shipping the storage driver with all backends which may pull in too many dependencies. Peter Krempa (11): configure: Fix configure output for RBD storage backend tests: storagepoolxml2xml: Remove compile conditionals tests: drivermodule: Drop unused macro arguments driver: Split/refactor driver module loading daemon: Refactor connection driver module loading storage: backend: Refactor registration of the backend drivers storage: Turn driver backends into (static) modules storage: Turn storage backends into dynamic modules tests: drivermodule: Make sure that all compiled storage backends can be loaded spec: Modularize the storage driver news: Mention storage driver split daemon/libvirtd.c | 136 +++++++++------------- docs/news.xml | 10 ++ libvirt.spec.in | 185 +++++++++++++++++++++++++----- m4/virt-storage-rbd.m4 | 2 +- src/Makefile.am | 199 ++++++++++++++++++++++++++++++--- src/driver.c | 136 ++++++++++++++-------- src/driver.h | 6 +- src/libvirt_driver_modules.syms | 1 + src/storage/storage_backend.c | 151 +++++++++++++++++++------ src/storage/storage_backend.h | 5 + src/storage/storage_backend_disk.c | 7 ++ src/storage/storage_backend_disk.h | 4 +- src/storage/storage_backend_fs.c | 27 +++++ src/storage/storage_backend_fs.h | 11 +- src/storage/storage_backend_gluster.c | 13 ++- src/storage/storage_backend_gluster.h | 5 +- src/storage/storage_backend_iscsi.c | 7 ++ src/storage/storage_backend_iscsi.h | 4 +- src/storage/storage_backend_logical.c | 7 ++ src/storage/storage_backend_logical.h | 4 +- src/storage/storage_backend_mpath.c | 8 ++ src/storage/storage_backend_mpath.h | 4 +- src/storage/storage_backend_rbd.c | 7 ++ src/storage/storage_backend_rbd.h | 4 +- src/storage/storage_backend_scsi.c | 7 ++ src/storage/storage_backend_scsi.h | 4 +- src/storage/storage_backend_sheepdog.c | 7 ++ src/storage/storage_backend_sheepdog.h | 4 +- src/storage/storage_backend_vstorage.c | 7 ++ src/storage/storage_backend_vstorage.h | 4 +- src/storage/storage_backend_zfs.c | 7 ++ src/storage/storage_backend_zfs.h | 4 +- src/storage/storage_driver.c | 19 +++- src/storage/storage_driver.h | 1 + tests/Makefile.am | 4 +- tests/storagepoolxml2xmltest.c | 6 - tests/virdrivermoduletest.c | 52 +++++---- tests/virstoragetest.c | 4 + 38 files changed, 788 insertions(+), 285 deletions(-) -- 2.11.0

3 25

[libvirt] [RFC] finegrained disk driver options control
by Denis V. Lunev 20 Mar '17

20 Mar '17

Hello, All! There is a problem in the current libvirt implementation. domain.xml allows to specify only basic set of options, especially in the case of QEMU, when there are really a lot of tweaks in format drivers. Most likely these options will never be supported in a good way in libvirt as recognizable entities. Right now in order to debug libvirt QEMU VM in production I am using very strange approach: - disk section of domain XML is removed - exact command line options to start the disk are specified at the end of domain.xml whithin <qemu:commandline> as described by Stefan http://blog.vmsplice.net/2011/04/how-to-pass-qemu-command-line-options.html The problem is that when debug is finished and viable combinations of options is found I can not drop VM in such state in the production. This is the pain and problem. For example, I have spend 3 days with the VM of one customer which blames us for slow IO in the guest. I have found very good combination of non-standard options which increases disk performance 5 times (not 5%). Currently I can not put this combination in the production as libvirt does not see the disk. I propose to do very simple thing, may be I am not the first one here, but it would be nice to allow to pass arbitrary option to the QEMU command line. This could be done in a very generic way if we will allow to specify additional options inside <driver> section like this: <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none' io='native' iothread='1'> <option name='l2-cache-size' value='64M/> <option name='cache-clean-interval' value='32'/> </driver> <source file='/var/lib/libvirt/images/rhel7.qcow2'/> <target dev='sda' bus='scsi'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and so on. The meaning (at least for QEMU) is quite simple - these options will just be added to the end of the -drive command line. The meaning for other drivers should be the same and I think that there are ways to pass generic options in them. Any opinion? Den

4 19

[libvirt] [PATCH] qemu: Don't try to update undefined guest CPU
by Jiri Denemark 20 Mar '17

20 Mar '17

Calling virCPUUpdateLive on a domain with no guest CPU configuration does not make sense. Especially when doing so would crash libvirtd. Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- src/qemu/qemu_process.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 780f9587a..ec0e36d2e 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3815,11 +3815,6 @@ qemuProcessVerifyCPUFeatures(virDomainDefPtr def, { int rc; - if (!def->cpu || - (def->cpu->mode == VIR_CPU_MODE_CUSTOM && - !def->cpu->model)) - return 0; - rc = virCPUCheckFeature(def->os.arch, def->cpu, "invtsc"); if (rc < 0) { @@ -3870,6 +3865,13 @@ qemuProcessUpdateLiveGuestCPU(virQEMUDriverPtr driver, qemuProcessVerifyHypervFeatures(def, cpu) < 0) goto cleanup; + if (!def->cpu || + (def->cpu->mode == VIR_CPU_MODE_CUSTOM && + !def->cpu->model)) { + ret = 0; + goto cleanup; + } + if (qemuProcessVerifyCPUFeatures(def, cpu) < 0) goto cleanup; -- 2.12.0

2 1

Re: [libvirt] [PATCH 2/2] qemu: Validate the domain after marking the current domain as transient
by Daniel P. Berrange 20 Mar '17

20 Mar '17

On Wed, Mar 08, 2017 at 10:32:32AM +0100, Marc Hartmayer wrote: > On Mon, Feb 27, 2017 at 11:20 AM +0100, "Daniel P. Berrange" <berrange(a)redhat.com> wrote: > > On Mon, Feb 27, 2017 at 10:59:39AM +0100, Marc Hartmayer wrote: > >> On Thu, Feb 23, 2017 at 05:36 PM +0100, "Daniel P. Berrange" <berrange(a)redhat.com> wrote: > >> > On Thu, Feb 23, 2017 at 05:22:44PM +0100, Marc Hartmayer wrote: > >> >> On Thu, Feb 23, 2017 at 03:33 PM +0100, Michal Privoznik <mprivozn(a)redhat.com> wrote: > >> >> > On 02/23/2017 10:44 AM, Marc Hartmayer wrote: > >> >> >> Validate the domain that actually will be started. It's semantically > >> >> >> more clear and also it can detect failures that may have happened in > >> >> >> virDomainObjSetDefTransient(). > >> >> >> > >> >> >> Signed-off-by: Marc Hartmayer <mhartmay(a)linux.vnet.ibm.com> > >> >> >> Reviewed-by: Bjoern Walk <bwalk(a)linux.vnet.ibm.com> > >> >> >> Reviewed-by: Boris Fiuczynski <fiuczy(a)linux.vnet.ibm.com> > >> >> >> --- > >> >> >> src/qemu/qemu_process.c | 6 +++--- > >> >> >> 1 file changed, 3 insertions(+), 3 deletions(-) > >> >> >> > >> >> >> diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c > >> >> >> index a57d136..bd3a8b8 100644 > >> >> >> --- a/src/qemu/qemu_process.c > >> >> >> +++ b/src/qemu/qemu_process.c > >> >> >> @@ -4746,9 +4746,6 @@ qemuProcessInit(virQEMUDriverPtr driver, > >> >> >> vm->def->os.machine))) > >> >> >> goto cleanup; > >> >> >> > >> >> >> - if (qemuProcessStartValidate(driver, vm, priv->qemuCaps, caps, flags) < 0) > >> >> >> - goto cleanup; > >> >> >> - > >> >> >> /* Do this upfront, so any part of the startup process can add > >> >> >> * runtime state to vm->def that won't be persisted. This let's us > >> >> >> * report implicit runtime defaults in the XML, like vnc listen/socket > >> >> >> @@ -4757,6 +4754,9 @@ qemuProcessInit(virQEMUDriverPtr driver, > >> >> >> if (virDomainObjSetDefTransient(caps, driver->xmlopt, vm) < 0) > >> >> >> goto cleanup; > >> >> >> > >> >> >> + if (qemuProcessStartValidate(driver, vm, priv->qemuCaps, caps, flags) < 0) > >> >> >> + goto cleanup; > >> >> >> + > >> >> > > >> >> > This needs to be goto stop for the reasons described in the previous e-mail. > >> >> > > >> >> >> if (flags & VIR_QEMU_PROCESS_START_PRETEND) { > >> >> >> if (qemuDomainSetPrivatePaths(driver, vm) < 0) > >> >> >> goto cleanup; > >> >> >> > >> >> > > >> >> > Honestly, I like what we have now better. I mean, SetDefTransient() is > >> >> > very unlikely to fail. It's just doing a copy of domain definition (in a > >> >> > very stupid way, but lets save that for a different discussion). > >> >> > Basically, it will fail on OOM only (which you will not get on a Linux > >> >> > system, unless you really try). > >> >> > >> >> It's semantically more clear (at least for me) and for example it > >> >> enables us to change some parts of the transient domain before > >> >> validation (affect the transient domain only, not the persistent). > >> > > >> > What are you planning to change in the config before validation ? > >> > > >> > >> I'm implementing a feature which allows to select the boot device at > >> domain start time (something like 'virsh start --with-bootdevice sda > >> domain1'). The main reason why we want this is because the s390 > >> architecture boots only from the first device specified in the boot > >> order. > > > > There's no need to changes in the QEMU driver todo this. You can just > > query the current XML config, change the boot device in it, and then > > run virDomainCreateXML to launch the guest with the changed config, > > or virDomainDefineXML again to make the changed boot device permanent. > > > > First of all, I hope I understand you right :) (you can tell me as soon > as you have read the following text) > > I've followed your advice and tried to add this functionality without > any changes in the QEMU/hypervisor. For this I've created a new function > in the remote driver which will call the needed functions (get current > XML config for the domain, manipulate the XML config, and then use > virDomainCreateXML for starting). > > To get the current XML config is straightforward as you've mentioned - > just use 'virDomanGetXMLDesc(...)'. > > But how can I change the boot device? > 1) I could use libxml2 for manipulating the XML string which we will get > with calling 'virDomainGetXMLDesc(..)' but this is error-prone and just > duplicate work as we have to parse the XML string and the information of > it. Also, if there are any additions in the future for boot devices > there will be no 'compile time reminder' that you have to edit this > function. Yes, this is the way it is normally done. There is a tradeoff here between wanting to be reminded at compile time but seeing build breakage, and libvirt wanting to be able to extend its config info without breaking apps. The libvirt view is that the latter is more important. > or > 2) Parse the XML string into our internal representation (virDomainDef), > adjust the boot orders and create a new XML string out of this internal > representation (reverse to the way how virDomainDefCopy(...) works). But > there is the huge problem: > > We need 'virCapsPtr caps' and 'virDomainXMLOptionPtr xmlopt' for > virDomainDefFormat(...) and virDomainDefParseString(...) but we're on > the remote driver layer and therefore we've no direct access to this. We > could add a function to the hypervisor driver interface for getting > these but this is just awkward. The virDomainDef are private data structures just for internal libvirt usage. Even though virsh is in the libvirt source tree, it should be treated as if it were a standalone application and thus only use the public APIs. > So my question to you is: do you have a better idea for this? > > Many thanks in advance. > > PS. I hope it's okay for you that I'm writing to you only for the moment > (as it's somehow off topic). If not I'll send it to the mailing list :) It isn't off-topic, so I'm copying back in the list. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://entangle-photo.org -o- http://search.cpan.org/~danberr/ :|

2 1

[libvirt] [PATCH 0/3] log|lock daemon: Don't spam logs with IO error messages after client disconnects
by Peter Krempa 17 Mar '17

17 Mar '17

See patch 3 for explanation Peter Krempa (3): rpc: socket: Add possibility to suppress errors on read hangup rpc: serverclient: Add option to suppress errors on EOF (log|lock)daemon: Don't spam logs with IO error messages after client disconnects src/locking/lock_daemon.c | 3 +++ src/logging/log_daemon.c | 3 +++ src/rpc/virnetserverclient.c | 13 +++++++++++++ src/rpc/virnetserverclient.h | 2 ++ src/rpc/virnetsocket.c | 33 +++++++++++++++++++++++++++------ src/rpc/virnetsocket.h | 2 ++ 6 files changed, 50 insertions(+), 6 deletions(-) -- 2.12.0

2 8

[libvirt] [REPOST PATCH 0/4] Split out storage object into its own module
by John Ferlan 17 Mar '17

17 Mar '17

Repost after merging with latest changes of: http://www.redhat.com/archives/libvir-list/2017-March/msg00305.html Continuing down the pile of drivers from my RFC for making a common pool object - we're now at storage... For reference see patch 3 of: http://www.redhat.com/archives/libvir-list/2017-February/msg00519.html This series works through the storage conf adjustments. This pile is fairly straightforward. The virStorageVol* API's make it a bit more interesting, but like other series we split out anything referencing virStoragePoolObj and go from there. John Ferlan (4): conf: Introduce virstorageobj conf: Adjust coding style for storage conf sources conf: Alter coding style of storage conf function prototypes conf: Use consistent function name prefixes for virstorageobj po/POTFILES.in | 1 + src/Makefile.am | 3 +- src/conf/storage_conf.c | 975 ++--------------------------------------- src/conf/storage_conf.h | 174 ++------ src/conf/virstorageobj.c | 997 ++++++++++++++++++++++++++++++++++++++++++ src/conf/virstorageobj.h | 156 +++++++ src/libvirt_private.syms | 34 +- src/storage/storage_backend.h | 2 +- src/storage/storage_driver.c | 24 +- src/storage/storage_driver.h | 2 +- src/storage/storage_util.h | 1 - src/test/test_driver.c | 1 + 12 files changed, 1263 insertions(+), 1107 deletions(-) create mode 100644 src/conf/virstorageobj.c create mode 100644 src/conf/virstorageobj.h -- 2.9.3

2 5

[libvirt] [PATCH 0/4] Split out storage object into its own module
by John Ferlan 17 Mar '17

17 Mar '17

Continuing down the pile of drivers from my RFC for making a common pool object - we're now at storage... For reference see patch 3 of: http://www.redhat.com/archives/libvir-list/2017-February/msg00519.html This series works through the storage conf adjustments. This pile is fairly straightforward. The virStorageVol* API's make it a bit more interesting, but like other series we split out anything referencing virStoragePoolObj and go from there. John Ferlan (4): conf: Introduce virstorageobj conf: Adjust coding style for storage conf sources conf: Alter coding style of storage conf function prototypes conf: Use consistent function name prefixes for virstorageobj po/POTFILES.in | 1 + src/Makefile.am | 3 +- src/conf/storage_conf.c | 965 ++--------------------------------------- src/conf/storage_conf.h | 174 ++------ src/conf/virstorageobj.c | 986 ++++++++++++++++++++++++++++++++++++++++++ src/conf/virstorageobj.h | 156 +++++++ src/libvirt_private.syms | 34 +- src/storage/storage_backend.h | 2 +- src/storage/storage_driver.c | 24 +- src/storage/storage_driver.h | 2 +- src/storage/storage_util.h | 1 - src/test/test_driver.c | 1 + 12 files changed, 1255 insertions(+), 1094 deletions(-) create mode 100644 src/conf/virstorageobj.c create mode 100644 src/conf/virstorageobj.h -- 2.9.3

2 6

[libvirt] [PATCH v2 0/4] qemu: Add support for generic PCIe Root Ports
by Andrea Bolognani 17 Mar '17

17 Mar '17

Blurby McBlurbface. Andrea Bolognani (4): qemu: Add support for generic PCIe Root Ports qemu: Use generic PCIe Root Ports by default when available tests: Test generic PCIe Root Ports news: Document support for generic PCIe Root Ports docs/news.xml | 10 ++++++ docs/schemas/domaincommon.rng | 1 + src/conf/domain_conf.c | 4 ++- src/conf/domain_conf.h | 1 + src/qemu/qemu_capabilities.c | 2 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 18 ++++++++-- src/qemu/qemu_domain_address.c | 13 +++++-- tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 + .../qemuxml2argv-pcie-root-port-model-generic.args | 22 ++++++++++++ .../qemuxml2argv-pcie-root-port-model-generic.xml | 22 ++++++++++++ .../qemuxml2argv-pcie-root-port-model-ioh3420.args | 21 ++++++++++++ .../qemuxml2argv-pcie-root-port-model-ioh3420.xml | 19 ++++++++++ tests/qemuxml2argvtest.c | 14 ++++++++ ...qemuxml2xmlout-pcie-root-port-model-generic.xml | 40 ++++++++++++++++++++++ ...qemuxml2xmlout-pcie-root-port-model-ioh3420.xml | 35 +++++++++++++++++++ tests/qemuxml2xmltest.c | 14 ++++++++ 17 files changed, 231 insertions(+), 7 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-root-port-model-generic.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-root-port-model-generic.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-root-port-model-ioh3420.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-root-port-model-ioh3420.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root-port-model-generic.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root-port-model-ioh3420.xml -- 2.7.4

2 10

[libvirt] [PATCH v1 0/2] libvirt-python: virEventAsyncIOImpl (was: libvirtaio)
by Wojtek Porczyk 17 Mar '17

17 Mar '17

Hello, As promised, this is the event loop implementation which dispatches the callbacks via asyncio's event loop. There are two patches: the first one fixes the bug around freeing opaque objects [1][2], and the second one is the actual implementation. Compared to standalone version I did earlier, this has public names more similar in style to other functions in the module. Also some comments are corrected, and packaging code is lightly touched. [1] https://www.redhat.com/archives/libvir-list/2017-January/msg00863.html [2] https://bugzilla.redhat.com/show_bug.cgi?id=1433028 Wojtek Porczyk (2): Allow for ff callbacks to be called by custom event implementations Add asyncio event loop implementation libvirt-override.c | 36 ++--- libvirt-override.py | 45 ++++++ libvirt-python.spec.in | 1 + libvirtaio.py | 398 +++++++++++++++++++++++++++++++++++++++++++++++++ sanitytest.py | 5 +- setup.py | 12 ++ 6 files changed, 471 insertions(+), 26 deletions(-) create mode 100644 libvirtaio.py -- pozdrawiam / best regards _.-._ Wojtek Porczyk .-^' '^-. Invisible Things Lab |'-.-^-.-'| | | | | I do not fear computers, | '-.-' | I fear lack of them. '-._ : ,-' -- Isaac Asimov `^-^-_>

2 3

[libvirt] [PATCH 00/12] qemu: Enforce guest CPU specification
by Jiri Denemark 17 Mar '17

17 Mar '17

When starting a domain with custom guest CPU specification QEMU may add or remove some CPU features. There are several reasons for this, e.g., QEMU/KVM does not support some requested features or the definition of the requested CPU model in libvirt's cpu_map.xml differs from the one QEMU is using. We can't really avoid this because CPU models are allowed to change with machine types and libvirt doesn't know (and probably doesn't even want to know) about such changes. Thus when we want to make sure guest ABI doesn't change when a domain gets migrated to another host, we need to update our live CPU definition according to the CPU QEMU created. Once updated, we will change CPU checking to VIR_CPU_CHECK_FULL to make sure the virtual CPU created after migration exactly matches the one on the source. https://bugzilla.redhat.com/show_bug.cgi?id=822148 https://bugzilla.redhat.com/show_bug.cgi?id=824989 Jiri Denemark (12): tests: Switch to sparse initialization of virCPUDef docs: Clarify /domain/cpu/@match description Introduce /domain/cpu/@check XML attribute qemu: Set default values for CPU check attribute qemu: Refactor Hyper-V features check qemu: Refactor KVM features check qemu: Refactor CPU features check qemu: Refactor qemuProcessVerifyGuestCPU qemu: Use ARCH_IS_X86 in qemuMonitorJSONGetGuestCPU qemu: Ask QEMU for filtered CPU features qemu: Update CPU definition according to QEMU qemu: Enforce guest CPU specification docs/formatdomain.html.in | 52 ++++- docs/schemas/cputypes.rng | 10 + docs/schemas/domaincommon.rng | 3 + src/conf/cpu_conf.c | 30 +++ src/conf/cpu_conf.h | 12 ++ src/conf/domain_conf.c | 21 ++ src/cpu/cpu.c | 45 +++++ src/cpu/cpu.h | 12 ++ src/cpu/cpu_x86.c | 105 ++++++++++ src/libvirt_private.syms | 1 + src/qemu/qemu_domain.c | 42 ++++ src/qemu/qemu_monitor.c | 11 +- src/qemu/qemu_monitor.h | 3 +- src/qemu/qemu_monitor_json.c | 38 +++- src/qemu/qemu_monitor_json.h | 3 +- src/qemu/qemu_process.c | 225 +++++++++++++-------- tests/domaincapstest.c | 38 ++-- tests/qemumonitorjsontest.c | 4 +- .../qemuxml2argv-aarch64-gic-host.xml | 2 +- .../qemuxml2argv-aarch64-gic-v2.xml | 2 +- .../qemuxml2argv-aarch64-gic-v3.xml | 2 +- .../qemuxml2argv-cpu-check-default-none.args | 21 ++ .../qemuxml2argv-cpu-check-default-none.xml | 19 ++ .../qemuxml2argv-cpu-check-default-none2.args | 21 ++ .../qemuxml2argv-cpu-check-default-none2.xml | 21 ++ .../qemuxml2argv-cpu-check-default-partial.args | 22 ++ .../qemuxml2argv-cpu-check-default-partial.xml | 19 ++ .../qemuxml2argv-cpu-check-default-partial2.args | 21 ++ .../qemuxml2argv-cpu-check-default-partial2.xml | 21 ++ .../qemuxml2argv-cpu-check-full.args | 1 + .../qemuxml2argv-cpu-check-full.xml | 21 ++ .../qemuxml2argv-cpu-check-none.args | 21 ++ .../qemuxml2argv-cpu-check-none.xml | 21 ++ .../qemuxml2argv-cpu-check-partial.args | 1 + .../qemuxml2argv-cpu-check-partial.xml | 21 ++ tests/qemuxml2argvtest.c | 8 + .../qemuxml2xmlout-aarch64-aavmf-virtio-mmio.xml | 2 +- ...qemuxml2xmlout-aarch64-video-virtio-gpu-pci.xml | 2 +- .../qemuxml2xmlout-aarch64-virtio-pci-default.xml | 2 +- ...2xmlout-aarch64-virtio-pci-manual-addresses.xml | 2 +- .../qemuxml2xmlout-cpu-check-default-none.xml | 28 +++ .../qemuxml2xmlout-cpu-check-default-none2.xml | 30 +++ .../qemuxml2xmlout-cpu-check-default-partial.xml | 30 +++ .../qemuxml2xmlout-cpu-check-default-partial2.xml | 30 +++ .../qemuxml2xmlout-cpu-check-full.xml | 30 +++ .../qemuxml2xmlout-cpu-check-none.xml | 30 +++ .../qemuxml2xmlout-cpu-check-partial.xml | 30 +++ .../qemuxml2xmlout-cpu-eoi-disabled.xml | 2 +- .../qemuxml2xmlout-cpu-eoi-enabled.xml | 2 +- .../qemuxml2xmlout-cpu-host-kvmclock.xml | 2 +- .../qemuxml2xmlout-cpu-host-model-features.xml | 2 +- ...emuxml2xmlout-cpu-host-passthrough-features.xml | 2 +- .../qemuxml2xmlout-cpu-kvmclock.xml | 2 +- .../qemuxml2xmlout-graphics-spice-timeout.xml | 2 +- tests/qemuxml2xmltest.c | 8 + tests/testutilsqemu.c | 48 ++--- 56 files changed, 1039 insertions(+), 167 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-none.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-none.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-none2.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-none2.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-partial.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-partial.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-partial2.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-default-partial2.xml create mode 120000 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-full.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-full.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-none.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-none.xml create mode 120000 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-partial.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-cpu-check-partial.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-default-none.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-default-none2.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-default-partial.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-default-partial2.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-full.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-none.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-cpu-check-partial.xml -- 2.12.0

2 16