- Devel - libvirt List Archives

[libvirt] [PATCH] storage: Remove rwlocks during virStoragePoolObjListForEach
by John Ferlan 29 May '18

29 May '18

Remove the locks since they are unnecessary and would cause a hang for a driver reload/restart when a transient pool was previously active as a result of the call: virStoragePoolUpdateInactive: ... if (!virStoragePoolObjGetConfigFile(obj)) { virStoragePoolObjRemove(driver->pools, obj); ... stack trace: Thread 17 (Thread 0x7fffcc574700 (LWP 12465)): ...pthread_rwlock_wrlock ...virRWLockWrite ...virObjectRWLockWrite ...virStoragePoolObjRemove ...virStoragePoolUpdateInactive ...storagePoolUpdateStateCallback ...virStoragePoolObjListForEachCb ...virHashForEach ...virStoragePoolObjListForEach ...storagePoolUpdateAllState ...storageStateInitialize ...virStateInitialize ...daemonRunStateInit ...virThreadHelper ...start_thread ...clone Introduced by commit id 4b2e0ed6e3. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- src/conf/virstorageobj.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/src/conf/virstorageobj.c b/src/conf/virstorageobj.c index 6c937f105c..e66b2ebfb2 100644 --- a/src/conf/virstorageobj.c +++ b/src/conf/virstorageobj.c @@ -438,6 +438,12 @@ virStoragePoolObjListForEachCb(void *payload, * not as it's being used for Autostart and UpdateAllState callers * that want to iterate over all the @pools objects not stopping if * one happens to fail. + * + * NB: We cannot take the Storage Pool lock here because it's possible + * that some action as part of Autostart or UpdateAllState will need + * to modify/destroy a transient pool. Since these paths only occur + * during periods in which the storageDriverLock is held (Initialization, + * AutoStart, or Reload) this is OK. */ void virStoragePoolObjListForEach(virStoragePoolObjListPtr pools, @@ -447,9 +453,7 @@ virStoragePoolObjListForEach(virStoragePoolObjListPtr pools, struct _virStoragePoolObjListForEachData data = { .iter = iter, .opaque = opaque }; - virObjectRWLockRead(pools); virHashForEach(pools->objs, virStoragePoolObjListForEachCb, &data); - virObjectRWUnlock(pools); } -- 2.14.3

2 2

[libvirt] [PATCH v2 0/2 capabilities: Provide info about host IOMMU support
by Filip Alac 29 May '18

29 May '18

Provide information about host IOMMU support in capabilities XML. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=967231 v1: https://www.redhat.com/archives/libvir-list/2018-May/msg01914.html v2: - Remove incorrect warning message Filip Alac (2): capabilities: Provide info about host IOMMU support docs: news: Add entry about iommu_support docs/news.xml | 8 ++++++++ docs/schemas/capability.rng | 11 +++++++++++ src/conf/capabilities.c | 8 ++++++++ src/conf/capabilities.h | 5 +++++ src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 3 +++ src/util/virpci.c | 19 +++++++++++++++++++ src/util/virpci.h | 2 ++ 8 files changed, 57 insertions(+) -- 2.17.0

2 3

[libvirt] [PATCH 0/4] Remove 'bootHash'
by Ján Tomko 29 May '18

29 May '18

An alternative to Peter's: [PATCH 1/4] conf: domain: Remove code accessing 'bootHash' from the post-parse infrestructure <8b4627fedd199117af1ab46f5562e3838679357e.1527500017.git.pkrempa(a)redhat.com> Ján Tomko (3): vmx: add VIR_DOMAIN_DEF_FEATURE_NO_BOOT_ORDER conf: introduce virDomainDefCheckBootOrder conf: remove 'bootHash' completely Peter Krempa (1): conf: remove 'bootHash' from the post-parse infrastructure src/conf/domain_conf.c | 209 +++++++++++++++------------ src/conf/domain_conf.h | 1 + src/vmx/vmx.c | 3 +- tests/qemuargv2xmldata/nomachine-aarch64.xml | 1 + tests/qemuargv2xmldata/nomachine-ppc64.xml | 1 + tests/qemuargv2xmldata/nomachine-x86_64.xml | 1 + tests/sexpr2xmldata/sexpr2xml-fv-kernel.xml | 1 + 7 files changed, 120 insertions(+), 97 deletions(-) -- 2.16.1

2 13

[libvirt] plan for next release
by Daniel Veillard 28 May '18

28 May '18

Seems the end of the month is coming soon ! I suggest to enter freeze tomorrow morningm with plan for an RC2 on Thursday and a final release on the week-end, Hope this works for everybody, thanks ! Daniel -- Daniel Veillard | Red Hat Developers Tools http://developer.redhat.com/ veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 3

[libvirt] [PATCH] qemu: Don't build cache= cmd line for scsi-block
by Michal Privoznik 28 May '18

28 May '18

Trying to set any cache for <disk device='lun'/> makes no sense. Such disk translates into -device scsi-block on the command line and the device lacks any cache setting because it's merely a middle man between qemu and real SCSI device. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- src/qemu/qemu_command.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 7408f6bc70..c7ff074e29 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1824,6 +1824,11 @@ qemuBuildDriveDevCacheStr(virDomainDiskDefPtr disk, if (disk->cachemode == VIR_DOMAIN_DISK_CACHE_DEFAULT) return 0; + /* VIR_DOMAIN_DISK_DEVICE_LUN translates into 'scsi-block' + * where any caching setting makes no sense. */ + if (disk->device == VIR_DOMAIN_DISK_DEVICE_LUN) + return 0; + if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DISK_WRITE_CACHE)) return 0; -- 2.16.1

2 1

[libvirt] [PATCH 0/4] conf: Invoke post-parse callbacks after parsing private XML
by Peter Krempa 28 May '18

28 May '18

This will allow the qemu post-parse callbacks to access 'qemuCaps' which is stored in the status XML when we restore the status of VMs. It will become useful in cases when we need to decide whether storage authentication/encryption secret aliases will need to be regenerated. Peter Krempa (4): conf: domain: Remove code accessing 'bootHash' from the post-parse infrestructure conf: domain: Invoke post-parse callbacks after parsing private XML parts conf: domain: Allow passing in 'parseOpaque' for post-parse of status XML qemu: domain: Pass 'qemuCaps' to post parse callbacks when parsing status XML src/conf/domain_conf.c | 97 ++++++++++++++++++++++++++------------------------ src/conf/domain_conf.h | 5 +++ src/qemu/qemu_domain.c | 10 ++++++ 3 files changed, 65 insertions(+), 47 deletions(-) -- 2.16.2

2 8

[libvirt] [PATCHv2 0/3] Finish the conversion to virConfGetValue* functions
by Fabiano Fidêncio 28 May '18

28 May '18

This patchset finishes the conversion to virConfGetValue* functions, started by Daniel Berrange a few months ago. Please, mind that although we could make virConfGetValue* functions more generic in order to support numbers and booleans as strings, that doesn't seem the safest path to take. The side-effect of this is that we will have to live with some specific code doing that as part of vmx and xen_common. Once this patchset gets merged, https://wiki.libvirt.org/page/BiteSizedTasks#Finish_conversion_to_virConfGe… can be removed. - Changes since v1: All the "values" from virConfGetValueString() are freed Fabiano Fidêncio (3): xen_vm: convert to typesafe virConf accessors vmx: convert to typesafe virConf accessors xen_common: convert to typesafe virConf accessors src/vmx/vmx.c | 196 ++++++-------- src/xenconfig/xen_common.c | 637 ++++++++++++++++++++++----------------------- src/xenconfig/xen_xm.c | 268 ++++++++++--------- 3 files changed, 512 insertions(+), 589 deletions(-) -- 2.14.3

2 11

[libvirt] [PATCH v2 00/12] Introduce virDomainDetachDeviceAlias
by Michal Privoznik 27 May '18

27 May '18

v2 of: https://www.redhat.com/archives/libvir-list/2018-May/msg01530.html diff to v1: - The semantic is changed a bit. Now it's "send request" only, and users have to listen for DEVICE_DELETED event. They would have to do that anyway. - Couple of more fixes related to asynchronous behaviour Michal Privoznik (12): Introduce virDomainDetachDeviceAlias API remote: Implement virDomainDetachDeviceAlias virsh: Expose virDomainDetachDeviceAlias qemuDomainRemoveChrDevice: Release device address qemuDomainDetachShmemDevice: Don't release shmem address twice qemuDomainDetachWatchdog: Don't release watchdog address twice qemu_hotplug: Use more gotos in qemuDomainDetach*Device qemuDomainDetachDeviceLiveAndConfig: Don't use driver->caps directly qemuDomainDetachDeviceLiveAndConfig: Avoid overwriting @ret qemu_hotplug: Allow asynchronous detach qemu: Implement virDomainDetachDeviceAlias news: Document new API introduction docs/news.xml | 8 ++ include/libvirt/libvirt-domain.h | 3 + src/driver-hypervisor.h | 6 + src/libvirt-domain.c | 53 ++++++++ src/libvirt_public.syms | 5 + src/qemu/qemu_driver.c | 162 +++++++++++++++++++---- src/qemu/qemu_hotplug.c | 278 +++++++++++++++++++++++++-------------- src/qemu/qemu_hotplug.h | 33 +++-- src/remote/remote_driver.c | 1 + src/remote/remote_protocol.x | 16 ++- src/remote_protocol-structs | 6 + tests/qemuhotplugtest.c | 13 +- tools/virsh-domain.c | 72 ++++++++++ tools/virsh.pod | 12 ++ 14 files changed, 525 insertions(+), 143 deletions(-) -- 2.16.1

2 25

[libvirt] [PATCH] nwfilter: fix IP address learning
by Daniel P. Berrangé 26 May '18

26 May '18

In a previous commit: commit d4bf8f415074759baf051644559e04fe78888f8b Author: Daniel P. Berrangé <berrange(a)redhat.com> Date: Wed Feb 14 09:43:59 2018 +0000 nwfilter: handle missing switch enum cases Ensure all enum cases are listed in switch statements, or cast away enum type in places where we don't wish to cover all cases. Reviewed-by: John Ferlan <jferlan(a)redhat.com> Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> we changed a switch in the nwfilter learning thread so that it had explict cases for all enum entries. Unfortunately the parameters in the method had been declared with incorrect type. The "howDetect" parameter does *not* accept "enum howDetect" values, rather it accepts a bitmask of "enum howDetect" values, so it should have been an "int" type. The caller always passes DETECT_STATIC|DETECT_DHCP, so essentially the IP addressing learning was completely broken by the above change, as it never matched any switch case, hitting the default leading to EINVAL. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com> --- src/nwfilter/nwfilter_learnipaddr.c | 13 ++++++------- src/nwfilter/nwfilter_learnipaddr.h | 2 +- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/src/nwfilter/nwfilter_learnipaddr.c b/src/nwfilter/nwfilter_learnipaddr.c index cc3bfd971c..061b39d72b 100644 --- a/src/nwfilter/nwfilter_learnipaddr.c +++ b/src/nwfilter/nwfilter_learnipaddr.c @@ -144,7 +144,7 @@ struct _virNWFilterIPAddrLearnReq { char *filtername; virHashTablePtr filterparams; virNWFilterDriverStatePtr driver; - enum howDetect howDetect; + int howDetect; /* bitmask of enum howDetect */ int status; volatile bool terminate; @@ -442,23 +442,22 @@ learnIPAddressThread(void *arg) if (techdriver->applyDHCPOnlyRules(req->ifname, &req->macaddr, NULL, false) < 0) { + VIR_DEBUG("Unable to apply DHCP only rules"); req->status = EINVAL; goto done; } virBufferAddLit(&buf, "src port 67 and dst port 68"); break; - case DETECT_STATIC: + default: if (techdriver->applyBasicRules(req->ifname, &req->macaddr) < 0) { + VIR_DEBUG("Unable to apply basic rules"); req->status = EINVAL; goto done; } virBufferAsprintf(&buf, "ether host %s or ether dst ff:ff:ff:ff:ff:ff", macaddr); break; - default: - req->status = EINVAL; - goto done; } if (virBufferError(&buf)) { @@ -693,7 +692,7 @@ learnIPAddressThread(void *arg) * once its IP address has been detected * @driver : the network filter driver * @howDetect : the method on how the thread is supposed to detect the - * IP address; must choose any of the available flags + * IP address; bitmask of "enum howDetect" flags. * * Instruct to learn the IP address being used on a given interface (ifname). * Unless there already is a thread attempting to learn the IP address @@ -711,7 +710,7 @@ virNWFilterLearnIPAddress(virNWFilterTechDriverPtr techdriver, const char *filtername, virHashTablePtr filterparams, virNWFilterDriverStatePtr driver, - enum howDetect howDetect) + int howDetect) { int rc; virThread thread; diff --git a/src/nwfilter/nwfilter_learnipaddr.h b/src/nwfilter/nwfilter_learnipaddr.h index 06fea5bff8..753aabc594 100644 --- a/src/nwfilter/nwfilter_learnipaddr.h +++ b/src/nwfilter/nwfilter_learnipaddr.h @@ -43,7 +43,7 @@ int virNWFilterLearnIPAddress(virNWFilterTechDriverPtr techdriver, const char *filtername, virHashTablePtr filterparams, virNWFilterDriverStatePtr driver, - enum howDetect howDetect); + int howDetect); bool virNWFilterHasLearnReq(int ifindex); int virNWFilterTerminateLearnReq(const char *ifname); -- 2.17.0

2 2

[libvirt] [PATCH 0/3] Finish the conversion to virConfGetValue* functions
by Fabiano Fidêncio 25 May '18

25 May '18

This patchset finishes the conversion to virConfGetValue* functions, started by Daniel Berrange a few months ago. Please, mind that although we could make virConfGetValue* functions more generic in order to support numbers and booleans as strings, that doesn't seem the safest path to take. The side-effect of this is that we will have to live with some specific code doing that as part of vmx and xen_common. Fabiano Fidêncio (3): xen_vm: convert to typesafe virConf accessors vmx: convert to typesafe virConf accessors xen_common: convert to typesafe virConf accessors src/vmx/vmx.c | 197 +++++------- src/xenconfig/xen_common.c | 631 ++++++++++++++++++------------------- src/xenconfig/xen_xm.c | 268 ++++++++-------- 3 files changed, 504 insertions(+), 592 deletions(-) -- 2.17.0

1 4

[libvirt] [PATCH] tools: virsh: Add virshCellnoCompleter.
by Roland Schulz 25 May '18

25 May '18

Signed-off-by: Roland Schulz <schullzroll(a)gmail.com> --- tools/virsh-completer.c | 59 +++++++++++++++++++++++++++++++++++++++++ tools/virsh-completer.h | 3 +++ tools/virsh-host.c | 3 +++ 3 files changed, 65 insertions(+) diff --git a/tools/virsh-completer.c b/tools/virsh-completer.c index 5713a887e..ce152226f 100644 --- a/tools/virsh-completer.c +++ b/tools/virsh-completer.c @@ -756,3 +756,62 @@ virshNodedevEventNameCompleter(vshControl *ctl ATTRIBUTE_UNUSED, virStringListFree(ret); return NULL; } + + +char ** +virshCellnoCompleter(vshControl *ctl, + const vshCmd *cmd ATTRIBUTE_UNUSED, + unsigned int flags) +{ + xmlXPathContextPtr ctxt = NULL; + virshControlPtr priv = ctl->privData; + unsigned int ncells = 0; + xmlNodePtr *cells = NULL; + xmlDocPtr doc = NULL; + size_t i = 0; + char *cap_xml = NULL; + char *cellid = NULL; + char **ret = NULL; + + virCheckFlags(0, NULL); + + if (!priv->conn || virConnectIsAlive(priv->conn) <= 0) + goto error; + + if (!(cap_xml = virConnectGetCapabilities(priv->conn))) + goto error; + + if (!(doc = virXMLParseStringCtxt(cap_xml, _("capabilities"), &ctxt))) + goto error; + + ncells = virXPathNodeSet("/capabilities/host/topology/cells/cell", ctxt, &cells); + if (ncells <= 0) + goto error; + + if (VIR_ALLOC_N(ret, ncells + 1)) + goto error; + + for (i = 0; i < ncells; i++) { + VIR_FREE(cellid); + cellid = virXMLPropString(cells[i], "id"); + if (VIR_STRDUP(ret[i], cellid) < 0) + goto error; + } + + cleanup: + xmlXPathFreeContext(ctxt); + VIR_FREE(cells); + xmlFreeDoc(doc); + VIR_FREE(cap_xml); + VIR_FREE(cellid); + + return ret; + + error: + if (ret) { + for (i = 0; i < ncells; i++) + VIR_FREE(ret[i]); + } + VIR_FREE(ret); + goto cleanup; +} diff --git a/tools/virsh-completer.h b/tools/virsh-completer.h index 86632ee91..ee7eec68c 100644 --- a/tools/virsh-completer.h +++ b/tools/virsh-completer.h @@ -94,4 +94,7 @@ char ** virshNodedevEventNameCompleter(vshControl *ctl, const vshCmd *cmd, unsigned int flags); +char ** virshCellnoCompleter(vshControl *ctl, + const vshCmd *cmd, + unsigned int flags); #endif diff --git a/tools/virsh-host.c b/tools/virsh-host.c index 12c13f522..991c0f50a 100644 --- a/tools/virsh-host.c +++ b/tools/virsh-host.c @@ -149,6 +149,7 @@ static const vshCmdInfo info_freecell[] = { static const vshCmdOptDef opts_freecell[] = { {.name = "cellno", .type = VSH_OT_INT, + .completer = virshCellnoCompleter, .help = N_("NUMA cell number") }, {.name = "all", @@ -274,6 +275,7 @@ static const vshCmdInfo info_freepages[] = { static const vshCmdOptDef opts_freepages[] = { {.name = "cellno", .type = VSH_OT_INT, + .completer = virshCellnoCompleter, .help = N_("NUMA cell number") }, {.name = "pagesize", @@ -483,6 +485,7 @@ static const vshCmdOptDef opts_allocpages[] = { }, {.name = "cellno", .type = VSH_OT_INT, + .completer = virshCellnoCompleter, .help = N_("NUMA cell number") }, {.name = "add", -- 2.17.0

3 2

[libvirt] [tck PATCH 0/3] Some misc fixes
by Daniel P. Berrangé 25 May '18

25 May '18

Just random things i found while testing the TCK against current git Daniel P. Berrangé (3): scripts: avoid using multicast MAC addresses scripts: strip quotes from URI before checking it scripts: fix block info test conditions scripts/domain/121-block-info.t | 5 ++--- scripts/domain/215-nic-hotplug-many.t | 6 +++--- scripts/nwfilter/nwfilter2vmtest.sh | 2 +- scripts/nwfilter/nwfilter_concurrent.sh | 2 +- 4 files changed, 7 insertions(+), 8 deletions(-) -- 2.17.0

2 4

[libvirt] [PATCH v2 0/8] Fix some issues with rng grammar for output XML's,
by John Ferlan 25 May '18

25 May '18

v1: https://www.redhat.com/archives/libvir-list/2018-May/msg01455.html Update patches to add data into schema for examples that I could generate. For the vpxmigr and vzmigr, I wasn't sure what the capabilityschemadata should look like, so I left those out. Those are only validate in the "right" environment when virCapabilitiesAddHostMigrateTransport is called. John Ferlan (8): schema: Add physical sizing grammer for storagevol grammar schema: Remove xenmigr from host migrate transport capability schema,tests: Use vpxmigr for host migrate transport capability schema: Add rdma for host migrate transport capability schema: Add vzmigr for host migrate transport capability schema: Add microcode to capability grammar schema: Fix capability grammar for pagesElem schema: Add missing block data for nodedev docs/schemas/capability.rng | 42 +++++++++++++++------- docs/schemas/nodedev.rng | 13 +++++++ docs/schemas/storagevol.rng | 5 +++ tests/capabilityschemadata/caps-qemu-kvm.xml | 1 + tests/capabilityschemadata/caps-test2.xml | 4 +++ tests/capabilityschemadata/caps-test3.xml | 7 ++++ tests/nodedevschemadata/DVD_with_media.xml | 2 ++ ...ge_serial_3600c0ff000d7a2a5d463ff4902000000.xml | 2 ++ ..._serial_SATA_HTS721010G9SA00_MPCZ12Y0GNGWSE.xml | 2 ++ tests/nodedevxml2xmltest.c | 22 ++++++++++++ tests/storagevolschemadata/qcow2-no-source.xml | 1 + tests/vmx2xmltest.c | 2 +- 12 files changed, 89 insertions(+), 14 deletions(-) -- 2.14.3

3 10

[libvirt] [REPOSTv2 PATCH v3 0/6] Add support for VM Generation ID (vmgenid)
by John Ferlan 25 May '18

25 May '18

Second reposting of: https://www.redhat.com/archives/libvir-list/2018-May/msg00813.html To update patches with more conflicts for patch 2 (capabilities) and patch 6 (news) Cover from the v3 posting: v2: https://www.redhat.com/archives/libvir-list/2018-April/msg02234.html Changes since v2: * Essentially handle comments from code review of original series from comments received for patch 6: https://www.redhat.com/archives/libvir-list/2018-April/msg02240.html It's a somewhat simplified approach removing the ABI checks and the adjustment to the genid value as part of domain def copy. * (NEW) Patch 5 - add a 'genid' domain capability (similar to how Cole added support for vmcoreinfo). Since the apps need a way to determine whether this is enabled, this seems to be the best way. John Ferlan (6): conf: Add VM Generation ID parse/format support qemu: Add VM Generation ID device capability qemu: Alter VM Generation ID for specific startup/launch transitions qemu: Add VM Generation ID to qemu command line domcaps: Add 'genid' to domain capabilities docs: Add news article for VM Generation ID docs/formatdomain.html.in | 27 +++++++++++ docs/formatdomaincaps.html.in | 7 ++- docs/news.xml | 13 ++++++ docs/schemas/domaincaps.rng | 7 +++ docs/schemas/domaincommon.rng | 8 ++++ src/conf/domain_capabilities.c | 3 ++ src/conf/domain_capabilities.h | 1 + src/conf/domain_conf.c | 54 ++++++++++++++++++++++ src/conf/domain_conf.h | 5 ++ src/qemu/qemu_capabilities.c | 4 ++ src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 24 ++++++++++ src/qemu/qemu_driver.c | 17 +++++-- src/qemu/qemu_process.c | 46 +++++++++++++++++- src/qemu/qemu_process.h | 1 + tests/domaincapsschemadata/basic.xml | 1 + tests/domaincapsschemadata/bhyve_basic.x86_64.xml | 1 + tests/domaincapsschemadata/bhyve_fbuf.x86_64.xml | 1 + tests/domaincapsschemadata/bhyve_uefi.x86_64.xml | 1 + tests/domaincapsschemadata/full.xml | 1 + tests/domaincapsschemadata/libxl-xenfv-usb.xml | 1 + tests/domaincapsschemadata/libxl-xenfv.xml | 1 + tests/domaincapsschemadata/libxl-xenpv-usb.xml | 1 + tests/domaincapsschemadata/libxl-xenpv.xml | 1 + tests/domaincapsschemadata/qemu_1.7.0.x86_64.xml | 1 + .../qemu_2.12.0-virt.aarch64.xml | 1 + tests/domaincapsschemadata/qemu_2.12.0.ppc64.xml | 1 + tests/domaincapsschemadata/qemu_2.12.0.s390x.xml | 1 + tests/domaincapsschemadata/qemu_2.12.0.x86_64.xml | 1 + .../qemu_2.6.0-virt.aarch64.xml | 1 + tests/domaincapsschemadata/qemu_2.6.0.aarch64.xml | 1 + tests/domaincapsschemadata/qemu_2.6.0.ppc64.xml | 1 + tests/domaincapsschemadata/qemu_2.6.0.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.7.0.s390x.xml | 1 + .../domaincapsschemadata/qemu_2.8.0-tcg.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.8.0.s390x.xml | 1 + tests/domaincapsschemadata/qemu_2.8.0.x86_64.xml | 1 + .../domaincapsschemadata/qemu_2.9.0-q35.x86_64.xml | 1 + .../domaincapsschemadata/qemu_2.9.0-tcg.x86_64.xml | 1 + tests/domaincapsschemadata/qemu_2.9.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.x86_64.xml | 1 + .../qemuxml2argvdata/genid-auto.x86_64-latest.args | 30 ++++++++++++ tests/qemuxml2argvdata/genid-auto.xml | 32 +++++++++++++ tests/qemuxml2argvdata/genid.x86_64-latest.args | 30 ++++++++++++ tests/qemuxml2argvdata/genid.xml | 32 +++++++++++++ tests/qemuxml2argvtest.c | 4 ++ tests/qemuxml2xmloutdata/genid-active.xml | 32 +++++++++++++ tests/qemuxml2xmloutdata/genid-auto-active.xml | 32 +++++++++++++ tests/qemuxml2xmloutdata/genid-auto-inactive.xml | 32 +++++++++++++ tests/qemuxml2xmloutdata/genid-inactive.xml | 32 +++++++++++++ tests/qemuxml2xmltest.c | 5 +- 53 files changed, 500 insertions(+), 7 deletions(-) create mode 100644 tests/qemuxml2argvdata/genid-auto.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/genid-auto.xml create mode 100644 tests/qemuxml2argvdata/genid.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/genid.xml create mode 100644 tests/qemuxml2xmloutdata/genid-active.xml create mode 100644 tests/qemuxml2xmloutdata/genid-auto-active.xml create mode 100644 tests/qemuxml2xmloutdata/genid-auto-inactive.xml create mode 100644 tests/qemuxml2xmloutdata/genid-inactive.xml -- 2.14.3

2 21

[libvirt] [jenkins-ci PATCH] guests: Don't backup files when changing them
by Andrea Bolognani 25 May '18

25 May '18

Since our entire guest state is fully reproducible, keeping backups around is not very useful; moreover, on CentOS 6 it results in us hitting https://github.com/ansible/ansible/issues/31982 Signed-off-by: Andrea Bolognani <abologna(a)redhat.com> --- guests/tasks/bootloader.yml | 2 -- guests/tasks/jenkins.yml | 1 - guests/tasks/users.yml | 2 -- 3 files changed, 5 deletions(-) diff --git a/guests/tasks/bootloader.yml b/guests/tasks/bootloader.yml index face3dd..3de8c0d 100644 --- a/guests/tasks/bootloader.yml +++ b/guests/tasks/bootloader.yml @@ -19,7 +19,6 @@ path: /etc/default/grub regexp: '^{{ item.key }}=.*$' line: '{{ item.key }}="{{ item.value }}"' - backup: yes with_items: - { key: 'GRUB_TIMEOUT', value: '1' } - { key: 'GRUB_CMDLINE_LINUX_DEFAULT', value: 'console=ttyS0' } @@ -45,7 +44,6 @@ regexp: '^{{ item.key }}=.*$' line: '{{ item.key }}="{{ item.value }}"' create: yes - backup: yes with_items: - { key: 'console', value: 'comconsole' } - { key: 'autoboot_delay', value: '1' } diff --git a/guests/tasks/jenkins.yml b/guests/tasks/jenkins.yml index 10aeec7..9076c34 100644 --- a/guests/tasks/jenkins.yml +++ b/guests/tasks/jenkins.yml @@ -23,7 +23,6 @@ lineinfile: path: /etc/rc.local create: yes - backup: yes regexp: '^nohup.*jenkins.*java.*slave\.jar.*&$' line: "nohup {{ su }} - jenkins -c '{{ java }} -jar /home/jenkins/slave.jar -jnlpUrl \"{{ jenkins_url }}\" -secret \"{{ jenkins_secret }}\"' >/var/log/jenkins.log 2>&1 &" insertbefore: '^exit .*$' diff --git a/guests/tasks/users.yml b/guests/tasks/users.yml index 033ca2a..0aa6230 100644 --- a/guests/tasks/users.yml +++ b/guests/tasks/users.yml @@ -17,7 +17,6 @@ regexp: '^#*\s*PermitRootLogin\s*.*$' line: 'PermitRootLogin without-password' state: present - backup: yes - name: '{{ flavor }}: Create user account' user: @@ -46,7 +45,6 @@ path: '{{ sudoers }}' line: '{{ flavor }} ALL=(ALL) NOPASSWD: ALL' state: present - backup: yes validate: 'visudo -cf %s' when: - flavor == 'test' -- 2.17.0

2 1

[libvirt] [PATCH] spec: Enable libssh on future RHEL
by Jiri Denemark 25 May '18

25 May '18

Future RHEL will certainly be modern enough to support libssh. Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> --- libvirt.spec.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index 0e4a84c98c..5e1e1df3f0 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -191,7 +191,7 @@ %endif # Enable libssh transport for new enough distros -%if 0%{?fedora} +%if 0%{?fedora} || 0%{?rhel} > 7 %define with_libssh 0%{!?_without_libssh:1} %endif -- 2.17.0

2 1

[libvirt] [PATCH] disk: Allow settling to occur after reading partitions
by John Ferlan 25 May '18

25 May '18

https://bugzilla.redhat.com/show_bug.cgi?id=1400475 In order to avoid a possible error as a result of kernel interactions with the partition helper, let's use virWaitForDevices to force things to settle down before attempting to open and read the partition. This is related to https://bugzilla.redhat.com/show_bug.cgi?id=1264719. Signed-off-by: John Ferlan <jferlan(a)redhat.com> --- NB: This also resolves issues seen while testing the patch with using pool-refresh "frequently" on the disk pool. Perhaps the timing of things has changed enough that it'd be see more often now. At least with the f26 test system I used. BTW: The other option proposed long ago, but rejected was adding a timeout loop. I've also run the python script from the other bz with 100% success. src/storage/storage_backend_disk.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/src/storage/storage_backend_disk.c b/src/storage/storage_backend_disk.c index 7b4549c34d..2e3d1e04a4 100644 --- a/src/storage/storage_backend_disk.c +++ b/src/storage/storage_backend_disk.c @@ -183,7 +183,16 @@ virStorageBackendDiskMakeDataVol(virStoragePoolObjPtr pool, * after an extended partition is created an open on the extended * partition will fail, so pass the NOERROR flag and only error if a * -1 was returned indicating some other error than an open error. + * + * NB: A small window exists in some cases where the just created + * partition disappears, but then reappears. Since we were given + * vol->target.path from parthelper, let's just be sure that any + * kernel magic that occurs as a result of parthelper doesn't cause + * us to fail with some sort of ENOENT failure since that would be + * quite "unexpected". So rather than just fail, let's use the + * virWaitForDevices to ensure everything has settled properly. */ + virWaitForDevices(); if (vol->source.partType == VIR_STORAGE_VOL_DISK_TYPE_EXTENDED) { if (virStorageBackendUpdateVolInfo(vol, false, VIR_STORAGE_VOL_OPEN_DEFAULT | -- 2.14.3

2 1

[libvirt] [PATCH] news: Add the event name completion
by Lin Ma 25 May '18

25 May '18

Signed-off-by: Lin Ma <lma(a)suse.com> --- docs/news.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/docs/news.xml b/docs/news.xml index 76d1613d35..693d4a373b 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -84,6 +84,15 @@ and ich9 sound devices. </description> </change> + <change> + <summary> + virsh: Enhance event name completion + </summary> + <description> + Implement event name completion for some commands (e.g. event, + secret-event, pool-event and nodedev-event) + </description> + </change> </section> <section title="Bug fixes"> </section> -- 2.16.2

2 1

[libvirt] [qemu PATCH v2] docs/interop: add "firmware.json"
by Laszlo Ersek 24 May '18

24 May '18

Add a schema that describes the different uses and properties of virtual machine firmware. Each firmware executable installed on a host system should come with at least one JSON file that conforms to this schema. Each file informs the management applications about - the firmware's properties and one possible use case / feature set, - configuration bits that are required to run the firmware binary. In addition, define rules for management apps for picking the highest priority firmware JSON file when multiple such files match the search criteria. Cc: "Daniel P. Berrange" <berrange(a)redhat.com> Cc: David Gibson <dgibson(a)redhat.com> Cc: Eric Blake <eblake(a)redhat.com> Cc: Gerd Hoffmann <kraxel(a)redhat.com> Cc: Kashyap Chamarthy <kchamart(a)redhat.com> Cc: Markus Armbruster <armbru(a)redhat.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Thomas Huth <thuth(a)redhat.com> Signed-off-by: Laszlo Ersek <lersek(a)redhat.com> --- Notes: PATCHv2: - previous version (PATCHv1) was posted at: <http://mid.mail-archive.com/20180509150431.4979-1-lersek@redhat.com> <https://www.redhat.com/archives/libvir-list/2018-May/msg00612.html> - drop @x-check-firmware for good PATCH: - previous version (RFCv3) was posted at: <http://mid.mail-archive.com/20180420231246.23130-4-lersek@redhat.com> - move "firmware.json" under docs/interop/; drop earlier development artifacts - no changes to the schema (received no comments on RFCv3) RFCv3: - Previous version (RFCv2) was posted at: <http://mid.mail-archive.com/20180417224054.26363-1-lersek@redhat.com> - Trim the CC list a little. - Wrap to a 72-char margin, for an easier reading. [Markus] - Run spell-checker. [Markus] - Rename @FirmwareType to @FirmwareOSInterface, to better express the concept. Update the enum constants accordingly (incl. documentation); in particular replace @slof with @openfirmware. Rename the @type field in @Firmware to @interface-type. [David, Gerd, Paolo, Thomas] - Better yet, rename @interface-type to @interface-types (plural), and turn it into a list of @FirmwareOSInterface entries, to express an ordered compat list with multiple firmware<->OS interface types. [Dan, Eric, Gerd, Paolo] - Drop @FirmwareArchitecture, and switch the type of @FirmwareTarget.@architecture to @SysEmuTarget (now defined in "common.json"). [Dan, Gerd, Markus] - Switch elements of @FirmwareTarget.@machines from aliases ("pc", "q35", "virt") to concrete machine types, with glob patterns understood. [Dan, Gerd] - Rename @secure-boot-enrolled-keys to @enrolled-keys, and drop the dependency on @secure-boot in its documentation. [Gerd] - Describe the firmware JSON directories and the search rules to management apps, under the @Firmware element. Relatedly, remove the language on any concrete certificates under @enrolled-keys, as these can be customized through the overrides. Also refresh the commit message. [Dan, Gerd] - Rename @pathname fields to @filename. [Markus] - Don't replace "@executable.@filename" with "@executable.filename" (that is, keep the second @ sign), because removing the 2nd @ sign messes up the documentation ("filename" stops being type-set in monospace in the HTML, for example). [Markus] - Rename @nvram_template to @nvram-template. [Thomas] - Keep @x-check-firmware for a while longer. [Dan, Gerd, Markus, Paolo] RFCv2: - previous version (RFCv1) was posted at <http://mid.mail-archive.com/20180407000117.25640-1-lersek@redhat.com> - v2 is basically a rewrite from scratch, starting out with Dan's definitions from <http://mid.mail-archive.com/20180410102033.GL5155@redhat.com> and <http://mid.mail-archive.com/20180410110357.GP5155@redhat.com>, hopefully addressing others' feedback as well RFCv1: - Folks on the CC list, please try to see if the suggested schema is flexible enough to describe the virtual firmware(s) that you are familiar with. Thanks! docs/interop/firmware.json | 540 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 540 insertions(+) create mode 100644 docs/interop/firmware.json diff --git a/docs/interop/firmware.json b/docs/interop/firmware.json new file mode 100644 index 000000000000..5e91aab8df1c --- /dev/null +++ b/docs/interop/firmware.json @@ -0,0 +1,540 @@ +# -*- Mode: Python -*- +# +# Copyright (C) 2018 Red Hat, Inc. +# +# Authors: +# Daniel P. Berrange <berrange(a)redhat.com> +# Laszlo Ersek <lersek(a)redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +## +# = Firmware +## + +{ 'include' : 'common.json' } +{ 'include' : 'block-core.json' } + +## +# @FirmwareOSInterface: +# +# Lists the firmware-OS interface types provided by various firmware +# that is commonly used with QEMU virtual machines. +# +# @bios: Traditional x86 BIOS interface. For example, firmware built +# from the SeaBIOS project usually provides this interface. +# +# @openfirmware: The interface is defined by the (historical) IEEE +# 1275-1994 standard. Examples for firmware projects that +# provide this interface are: OpenBIOS, OpenHackWare, +# SLOF. +# +# @uboot: Firmware interface defined by the U-Boot project. +# +# @uefi: Firmware interface defined by the UEFI specification. For +# example, firmware built from the edk2 (EFI Development Kit II) +# project usually provides this interface. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareOSInterface', + 'data' : [ 'bios', 'openfirmware', 'uboot', 'uefi' ] } + +## +# @FirmwareDevice: +# +# Defines the device types that firmware can be mapped into. +# +# @flash: The firmware executable and its accompanying NVRAM file are to +# be mapped into a pflash chip each. +# +# @kernel: The firmware is to be loaded like a Linux kernel. This is +# similar to @memory but may imply additional processing that +# is specific to the target architecture and machine type. +# +# @memory: The firmware is to be mapped into memory. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareDevice', + 'data' : [ 'flash', 'kernel', 'memory' ] } + +## +# @FirmwareTarget: +# +# Defines the machine types that firmware may execute on. +# +# @architecture: Determines the emulation target (the QEMU system +# emulator) that can execute the firmware. +# +# @machines: Lists the machine types (known by the emulator that is +# specified through @architecture) that can execute the +# firmware. Elements of @machines are supposed to be concrete +# machine types, not aliases. Glob patterns are understood, +# which is especially useful for versioned machine types. +# (For example, the glob pattern "pc-i440fx-*" matches +# "pc-i440fx-2.12".) On the QEMU command line, "-machine +# type=..." specifies the requested machine type (but that +# option does not accept glob patterns). +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareTarget', + 'data' : { 'architecture' : 'SysEmuTarget', + 'machines' : [ 'str' ] } } + +## +# @FirmwareFeature: +# +# Defines the features that firmware may support, and the platform +# requirements that firmware may present. +# +# @acpi-s3: The firmware supports S3 sleep (suspend to RAM), as defined +# in the ACPI specification. On the "pc-i440fx-*" machine +# types of the @i386 and @x86_64 emulation targets, S3 can be +# enabled with "-global PIIX4_PM.disable_s3=0" and disabled +# with "-global PIIX4_PM.disable_s3=1". On the "pc-q35-*" +# machine types of the @i386 and @x86_64 emulation targets, S3 +# can be enabled with "-global ICH9-LPC.disable_s3=0" and +# disabled with "-global ICH9-LPC.disable_s3=1". +# +# @acpi-s4: The firmware supports S4 hibernation (suspend to disk), as +# defined in the ACPI specification. On the "pc-i440fx-*" +# machine types of the @i386 and @x86_64 emulation targets, S4 +# can be enabled with "-global PIIX4_PM.disable_s4=0" and +# disabled with "-global PIIX4_PM.disable_s4=1". On the +# "pc-q35-*" machine types of the @i386 and @x86_64 emulation +# targets, S4 can be enabled with "-global +# ICH9-LPC.disable_s4=0" and disabled with "-global +# ICH9-LPC.disable_s4=1". +# +# @amd-sev: The firmware supports running under AMD Secure Encrypted +# Virtualization, as specified in the AMD64 Architecture +# Programmer's Manual. QEMU command line options related to +# this feature are documented in +# "docs/amd-memory-encryption.txt". +# +# @enrolled-keys: The variable store (NVRAM) template associated with +# the firmware binary has the UEFI Secure Boot +# operational mode turned on, with certificates +# enrolled. +# +# @requires-smm: The firmware requires the platform to emulate SMM +# (System Management Mode), as defined in the AMD64 +# Architecture Programmer's Manual, and in the Intel(R)64 +# and IA-32 Architectures Software Developer's Manual. On +# the "pc-q35-*" machine types of the @i386 and @x86_64 +# emulation targets, SMM emulation can be enabled with +# "-machine smm=on". (On the "pc-q35-*" machine types of +# the @i386 emulation target, @requires-smm presents +# further CPU requirements; one combination known to work +# is "-cpu coreduo,-nx".) If the firmware is marked as +# both @secure-boot and @requires-smm, then write +# accesses to the pflash chip (NVRAM) that holds the UEFI +# variable store must be restricted to code that executes +# in SMM, using the additional option "-global +# driver=cfi.pflash01,property=secure,value=on". +# Furthermore, a large guest-physical address space +# (comprising guest RAM, memory hotplug range, and 64-bit +# PCI MMIO aperture), and/or a high VCPU count, may +# present high SMRAM requirements from the firmware. On +# the "pc-q35-*" machine types of the @i386 and @x86_64 +# emulation targets, the SMRAM size may be increased +# above the default 16MB with the "-global +# mch.extended-tseg-mbytes=uint16" option. As a rule of +# thumb, the default 16MB size suffices for 1TB of +# guest-phys address space and a few tens of VCPUs; for +# every further TB of guest-phys address space, add 8MB +# of SMRAM. 48MB should suffice for 4TB of guest-phys +# address space and 2-3 hundred VCPUs. +# +# @secure-boot: The firmware implements the software interfaces for UEFI +# Secure Boot, as defined in the UEFI specification. Note +# that without @requires-smm, guest code running with +# kernel privileges can undermine the security of Secure +# Boot. +# +# @verbose-dynamic: When firmware log capture is enabled, the firmware +# logs a large amount of debug messages, which may +# impact boot performance. With log capture disabled, +# there is no boot performance impact. On the +# "pc-i440fx-*" and "pc-q35-*" machine types of the +# @i386 and @x86_64 emulation targets, firmware log +# capture can be enabled with the QEMU command line +# options "-chardev file,id=fwdebug,path=LOGFILEPATH +# -device isa-debugcon,iobase=0x402,chardev=fwdebug". +# @verbose-dynamic is mutually exclusive with +# @verbose-static. +# +# @verbose-static: The firmware unconditionally produces a large amount +# of debug messages, which may impact boot performance. +# This feature may typically be carried by certain UEFI +# firmware for the "virt-*" machine types of the @arm +# and @aarch64 emulation targets, where the debug +# messages are written to the first (always present) +# PL011 UART. @verbose-static is mutually exclusive +# with @verbose-dynamic. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareFeature', + 'data' : [ 'acpi-s3', 'acpi-s4', 'amd-sev', 'enrolled-keys', + 'requires-smm', 'secure-boot', 'verbose-dynamic', + 'verbose-static' ] } + +## +# @FirmwareFlashFile: +# +# Defines common properties that are necessary for loading a firmware +# file into a pflash chip. The corresponding QEMU command line option is +# "-drive file=@filename,format=@format". Note however that the +# option-argument shown here is incomplete; it is completed under +# @FirmwareMappingFlash. +# +# @filename: Specifies the filename on the host filesystem where the +# firmware file can be found. +# +# @format: Specifies the block format of the file pointed-to by +# @filename, such as @raw or @qcow2. +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareFlashFile', + 'data' : { 'filename' : 'str', + 'format' : 'BlockdevDriver' } } + +## +# @FirmwareMappingFlash: +# +# Describes loading and mapping properties for the firmware executable +# and its accompanying NVRAM file, when @FirmwareDevice is @flash. +# +# @executable: Identifies the firmware executable. The firmware +# executable may be shared by multiple virtual machine +# definitions. The corresponding QEMU command line option +# is "-drive +# if=pflash,unit=0,readonly=on,file=@executable.@filename,format=@executable.@format". +# +# @nvram-template: Identifies the NVRAM template compatible with +# @executable. Management software instantiates an +# individual copy -- a specific NVRAM file -- from +# @nvram-template.@filename for each new virtual +# machine definition created. @nvram-template.@filename +# itself is never mapped into virtual machines, only +# individual copies of it are. An NVRAM file is +# typically used for persistently storing the +# non-volatile UEFI variables of a virtual machine +# definition. The corresponding QEMU command line +# option is "-drive +# if=pflash,unit=1,readonly=off,file=FILENAME_OF_PRIVATE_NVRAM_FILE,format=@nvram-template.@format". +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareMappingFlash', + 'data' : { 'executable' : 'FirmwareFlashFile', + 'nvram-template' : 'FirmwareFlashFile' } } + +## +# @FirmwareMappingKernel: +# +# Describes loading and mapping properties for the firmware executable, +# when @FirmwareDevice is @kernel. +# +# @filename: Identifies the firmware executable. The firmware executable +# may be shared by multiple virtual machine definitions. The +# corresponding QEMU command line option is "-kernel +# @filename". +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareMappingKernel', + 'data' : { 'filename' : 'str' } } + +## +# @FirmwareMappingMemory: +# +# Describes loading and mapping properties for the firmware executable, +# when @FirmwareDevice is @memory. +# +# @filename: Identifies the firmware executable. The firmware executable +# may be shared by multiple virtual machine definitions. The +# corresponding QEMU command line option is "-bios +# @filename". +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareMappingMemory', + 'data' : { 'filename' : 'str' } } + +## +# @FirmwareMapping: +# +# Provides a discriminated structure for firmware to describe its +# loading / mapping properties. +# +# @device: Selects the device type that the firmware must be mapped +# into. +# +# Since: 2.13 +## +{ 'union' : 'FirmwareMapping', + 'base' : { 'device' : 'FirmwareDevice' }, + 'discriminator' : 'device', + 'data' : { 'flash' : 'FirmwareMappingFlash', + 'kernel' : 'FirmwareMappingKernel', + 'memory' : 'FirmwareMappingMemory' } } + +## +# @Firmware: +# +# Describes a firmware (or a firmware use case) to management software. +# +# It is possible for multiple @Firmware elements to match the search +# criteria of management software. Applications thus need rules to pick +# one of the many matches, and users need the ability to override distro +# defaults. +# +# It is recommended to create firmware JSON files (each containing a +# single @Firmware root element) with a double-digit prefix, for example +# "50-ovmf.json", "50-seabios-256k.json", etc, so they can be sorted in +# predictable order. The firmware JSON files should be searched for in +# three directories: +# +# - /usr/share/qemu/firmware -- populated by distro-provided firmware +# packages (XDG_DATA_DIRS covers +# /usr/share by default), +# +# - /etc/qemu/firmware -- exclusively for sysadmins' local additions, +# +# - $XDG_CONFIG_HOME/qemu/firmware -- exclusively for per-user local +# additions (XDG_CONFIG_HOME +# defaults to $HOME/.config). +# +# Top-down, the list of directories goes from general to specific. +# +# Management software should build a list of files from all three +# locations, then sort the list by filename (i.e., last pathname +# component). Management software should choose the first JSON file on +# the sorted list that matches the search criteria. If a more specific +# directory has a file with same name as a less specific directory, then +# the file in the more specific directory takes effect. If the more +# specific file is zero length, it hides the less specific one. +# +# For example, if a distro ships +# +# - /usr/share/qemu/firmware/50-ovmf.json +# +# - /usr/share/qemu/firmware/50-seabios-256k.json +# +# then the sysadmin can prevent the default OVMF being used at all with +# +# $ touch /etc/qemu/firmware/50-ovmf.json +# +# The sysadmin can replace/alter the distro default OVMF with +# +# $ vim /etc/qemu/firmware/50-ovmf.json +# +# or they can provide a parallel OVMF with higher priority +# +# $ vim /etc/qemu/firmware/10-ovmf.json +# +# or they can provide a parallel OVMF with lower priority +# +# $ vim /etc/qemu/firmware/99-ovmf.json +# +# @description: Provides a human-readable description of the firmware. +# Management software may or may not display @description. +# +# @interface-types: Lists the types of interfaces that the firmware can +# expose to the guest OS. This is a non-empty, ordered +# list; entries near the beginning of @interface-types +# are considered more native to the firmware, and/or +# to have a higher quality implementation in the +# firmware, than entries near the end of +# @interface-types. +# +# @mapping: Describes the loading / mapping properties of the firmware. +# +# @targets: Collects the target architectures (QEMU system emulators) +# and their machine types that may execute the firmware. +# +# @features: Lists the features that the firmware supports, and the +# platform requirements it presents. +# +# @tags: A list of auxiliary strings associated with the firmware for +# which @description is not appropriate, due to the latter's +# possible exposure to the end-user. @tags serves development and +# debugging purposes only, and management software shall +# explicitly ignore it. +# +# Since: 2.13 +# +# Examples: +# +# { +# "description": "SeaBIOS", +# "interface-types": [ +# "bios" +# ], +# "mapping": { +# "device": "memory", +# "filename": "/usr/share/seabios/bios-256k.bin" +# }, +# "targets": [ +# { +# "architecture": "i386", +# "machines": [ +# "pc-i440fx-*", +# "pc-q35-*" +# ] +# }, +# { +# "architecture": "x86_64", +# "machines": [ +# "pc-i440fx-*", +# "pc-q35-*" +# ] +# } +# ], +# "features": [ +# "acpi-s3", +# "acpi-s4" +# ], +# "tags": [ +# "CONFIG_BOOTSPLASH=n", +# "CONFIG_ROM_SIZE=256", +# "CONFIG_USE_SMM=n" +# ] +# } +# +# { +# "description": "OVMF with SB+SMM, empty varstore", +# "interface-types": [ +# "uefi" +# ], +# "mapping": { +# "device": "flash", +# "executable": { +# "filename": "/usr/share/OVMF/OVMF_CODE.secboot.fd", +# "format": "raw" +# }, +# "nvram-template": { +# "filename": "/usr/share/OVMF/OVMF_VARS.fd", +# "format": "raw" +# } +# }, +# "targets": [ +# { +# "architecture": "x86_64", +# "machines": [ +# "pc-q35-*" +# ] +# } +# ], +# "features": [ +# "acpi-s3", +# "amd-sev", +# "requires-smm", +# "secure-boot", +# "verbose-dynamic" +# ], +# "tags": [ +# "-a IA32", +# "-a X64", +# "-p OvmfPkg/OvmfPkgIa32X64.dsc", +# "-t GCC48", +# "-b DEBUG", +# "-D SMM_REQUIRE", +# "-D SECURE_BOOT_ENABLE", +# "-D FD_SIZE_4MB" +# ] +# } +# +# { +# "description": "OVMF with SB+SMM, SB enabled, MS certs enrolled", +# "interface-types": [ +# "uefi" +# ], +# "mapping": { +# "device": "flash", +# "executable": { +# "filename": "/usr/share/OVMF/OVMF_CODE.secboot.fd", +# "format": "raw" +# }, +# "nvram-template": { +# "filename": "/usr/share/OVMF/OVMF_VARS.secboot.fd", +# "format": "raw" +# } +# }, +# "targets": [ +# { +# "architecture": "x86_64", +# "machines": [ +# "pc-q35-*" +# ] +# } +# ], +# "features": [ +# "acpi-s3", +# "amd-sev", +# "enrolled-keys", +# "requires-smm", +# "secure-boot", +# "verbose-dynamic" +# ], +# "tags": [ +# "-a IA32", +# "-a X64", +# "-p OvmfPkg/OvmfPkgIa32X64.dsc", +# "-t GCC48", +# "-b DEBUG", +# "-D SMM_REQUIRE", +# "-D SECURE_BOOT_ENABLE", +# "-D FD_SIZE_4MB" +# ] +# } +# +# { +# "description": "UEFI firmware for ARM64 virtual machines", +# "interface-types": [ +# "uefi" +# ], +# "mapping": { +# "device": "flash", +# "executable": { +# "filename": "/usr/share/AAVMF/AAVMF_CODE.fd", +# "format": "raw" +# }, +# "nvram-template": { +# "filename": "/usr/share/AAVMF/AAVMF_VARS.fd", +# "format": "raw" +# } +# }, +# "targets": [ +# { +# "architecture": "aarch64", +# "machines": [ +# "virt-*" +# ] +# } +# ], +# "features": [ +# +# ], +# "tags": [ +# "-a AARCH64", +# "-p ArmVirtPkg/ArmVirtQemu.dsc", +# "-t GCC48", +# "-b DEBUG", +# "-D DEBUG_PRINT_ERROR_LEVEL=0x80000000" +# ] +# } +## +{ 'struct' : 'Firmware', + 'data' : { 'description' : 'str', + 'interface-types' : [ 'FirmwareOSInterface' ], + 'mapping' : 'FirmwareMapping', + 'targets' : [ 'FirmwareTarget' ], + 'features' : [ 'FirmwareFeature' ], + 'tags' : [ 'str' ] } } -- 2.14.1.3.gb7cf6e02401b

3 4

[libvirt] [PATCH 0/5] qemu: refactor device post parse callback
by Peter Krempa 24 May '18

24 May '18

Main idea was to split the disk code since I'll be changing it later but as I was at it I refactored everything. Peter Krempa (5): qemu: domain: Extract disk post parse code into a function qemu: domain: Extract network device def post parse code qemu: domain: Extract video device def post parse code qemu: domain: Extract panic device def post parse code qemu: domain: Use typecasted enum in qemuDomainDeviceDefPostParse src/qemu/qemu_domain.c | 219 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 144 insertions(+), 75 deletions(-) -- 2.16.2

2 10

Re: [libvirt] [PATCH v2 0/3] adding virGetLastErrorCode/Domain to paritally replace virGetLastError
by Ramy Elkest 24 May '18

24 May '18

Patch looks good, many thanks Eric. Ramy On Wed, May 9, 2018 at 12:58 PM, Erik Skultety <eskultet(a)redhat.com> wrote: > On Sat, May 05, 2018 at 01:04:18PM +0100, ramyelkest wrote: >> Changes from v1[1]: >> >> * removed virHasLastError() and s/virHasLastError/virGetLastErrorCode/g >> * replaced in missed files: virmodule.c and virnetlibsshsession.c >> * better split of patches >> >> [1] https://www.redhat.com/archives/libvir-list/2018-May/msg00259.html >> >> ramyelkest (3): >> util: cleanup: using virGetLastErrorMessage instead of err->message >> util: added virGetLastErrorCode/Domain >> all: replacing virGetLastError with virGetLastErrorCode where we can > > I suggested some minor adjustments to your patches without the need for a v3, > so let me know if you agree and I'll merge the series. > > Erik

1 0

[libvirt] [PATCH v2] Fix indentation of virshAllocpagesPagesizeCompleter arguments.
by Roland Schulz 24 May '18

24 May '18

Signed-off-by: Roland Schulz <schullzroll(a)gmail.com> --- tools/virsh-completer.c | 4 ++-- tools/virsh-completer.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/virsh-completer.c b/tools/virsh-completer.c index cbd5326d0..1df4d55af 100644 --- a/tools/virsh-completer.c +++ b/tools/virsh-completer.c @@ -568,8 +568,8 @@ virshSnapshotNameCompleter(vshControl *ctl, char ** virshAllocpagesPagesizeCompleter(vshControl *ctl, - const vshCmd *cmd ATTRIBUTE_UNUSED, - unsigned int flags) + const vshCmd *cmd ATTRIBUTE_UNUSED, + unsigned int flags) { unsigned long long byteval = 0; xmlXPathContextPtr ctxt = NULL; diff --git a/tools/virsh-completer.h b/tools/virsh-completer.h index c7b181879..8e4d46394 100644 --- a/tools/virsh-completer.h +++ b/tools/virsh-completer.h @@ -75,7 +75,7 @@ char ** virshSnapshotNameCompleter(vshControl *ctl, unsigned int flags); char ** virshAllocpagesPagesizeCompleter(vshControl *ctl, - const vshCmd *cmd, - unsigned int flags); + const vshCmd *cmd, + unsigned int flags); #endif -- 2.17.0

2 3

[libvirt] [PATCH v7 00/12] Add support for TPM emulator
by Stefan Berger 24 May '18

24 May '18

This series of patches adds support for the TPM emulator backend that is available in QEMU and based on swtpm + libtpms. It allows to attach a TPM 1.2 or 2 to a QEMU VM. sVirt labels are used for labeling the swtpm process, its Unix socket, and log file with the same label that the QEMU process gets. Besides that swtpm is added to the emulator cgroup to restrict its CPU usage. The device XML can be changed from a TPM 1.2 to a TPM 2 and back to a TPM 1.2. The device state is not removed during those changes but only when the domain is undefined. The swtpm needs persistent storage to store its state. For that I am using the uuid of the VM as part of the path since the name of the VM can be changed. Logfiles, PID files, and socket names are based on the name of the VM, though. Stefan v6->v7: - followed Jan Tomko's suggestion with resulting changing to patch 10/12. - re-added missing parts related to swtpm_setup and TPM that got lost in v4 v5->v6: - Addressed John Ferlan's comments - rebased on latest tip - Added patch 12. v4->v5: - Addressed John Ferlan's, Boris Fiuczysnki's and Marc Hartmayer's comments - rebased on latest tip v3->v4: - Addressed John Ferlan's comments - Fixed bugs I found while testing - rebased on latest tip Stefan Berger (12): conf: Add support for external swtpm TPM emulator to domain XML qemu: Extend QEMU capabilities with 'tpm-emulator' util: Implement virFileChownFiles() security: Add DAC and SELinux security for tpm-emulator qemu: Extend qemu_conf with tpm-emulator support qemu: Extend QEMU with external TPM support qemu: Add support for external swtpm TPM emulator tests: Add test cases for external swtpm TPM emulator security: Label the external swtpm with SELinux labels conf: Add support for choosing emulation of a TPM 2 qemu: Add swtpm to emulator cgroup news: Update news with new TPM emulator feature docs/formatdomain.html.in | 43 + docs/news.xml | 9 + docs/schemas/domaincommon.rng | 17 + libvirt.spec.in | 2 + src/conf/domain_audit.c | 2 + src/conf/domain_conf.c | 64 +- src/conf/domain_conf.h | 15 + src/libvirt_private.syms | 3 + src/qemu/Makefile.inc.am | 10 + src/qemu/libvirtd_qemu.aug | 5 + src/qemu/qemu.conf | 8 + src/qemu/qemu_capabilities.c | 5 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_cgroup.c | 36 + src/qemu/qemu_cgroup.h | 2 + src/qemu/qemu_command.c | 34 +- src/qemu/qemu_conf.c | 43 + src/qemu/qemu_conf.h | 6 + src/qemu/qemu_domain.c | 3 + src/qemu/qemu_extdevice.c | 180 ++++ src/qemu/qemu_extdevice.h | 59 ++ src/qemu/qemu_process.c | 16 + src/qemu/qemu_security.c | 69 ++ src/qemu/qemu_security.h | 11 + src/qemu/qemu_tpm.c | 922 +++++++++++++++++++++ src/qemu/qemu_tpm.h | 56 ++ src/qemu/test_libvirtd_qemu.aug.in | 2 + src/security/security_dac.c | 7 + src/security/security_driver.h | 7 + src/security/security_manager.c | 36 + src/security/security_manager.h | 6 + src/security/security_selinux.c | 172 ++++ src/security/security_stack.c | 40 + src/util/virfile.c | 55 ++ src/util/virfile.h | 3 + tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.aarch64.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.ppc64.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.x86_64.xml | 1 + .../tpm-emulator-tpm2.x86_64-latest.args | 33 + tests/qemuxml2argvdata/tpm-emulator-tpm2.xml | 30 + .../tpm-emulator.x86_64-latest.args | 33 + tests/qemuxml2argvdata/tpm-emulator.xml | 30 + tests/qemuxml2argvtest.c | 16 +- tests/qemuxml2xmloutdata/tpm-emulator-tpm2.xml | 34 + tests/qemuxml2xmloutdata/tpm-emulator.xml | 34 + tests/qemuxml2xmltest.c | 1 + 48 files changed, 2154 insertions(+), 11 deletions(-) create mode 100644 src/qemu/qemu_extdevice.c create mode 100644 src/qemu/qemu_extdevice.h create mode 100644 src/qemu/qemu_tpm.c create mode 100644 src/qemu/qemu_tpm.h create mode 100644 tests/qemuxml2argvdata/tpm-emulator-tpm2.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/tpm-emulator-tpm2.xml create mode 100644 tests/qemuxml2argvdata/tpm-emulator.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/tpm-emulator.xml create mode 100644 tests/qemuxml2xmloutdata/tpm-emulator-tpm2.xml create mode 100644 tests/qemuxml2xmloutdata/tpm-emulator.xml -- 2.14.3

2 14

[libvirt] [PATCH] Fix indentation of virshAllocpagesPagesizeCompleter arguments.
by Roland Schulz 24 May '18

24 May '18

--- tools/virsh-completer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/virsh-completer.c b/tools/virsh-completer.c index cbd5326d0..1df4d55af 100644 --- a/tools/virsh-completer.c +++ b/tools/virsh-completer.c @@ -568,8 +568,8 @@ virshSnapshotNameCompleter(vshControl *ctl, char ** virshAllocpagesPagesizeCompleter(vshControl *ctl, - const vshCmd *cmd ATTRIBUTE_UNUSED, - unsigned int flags) + const vshCmd *cmd ATTRIBUTE_UNUSED, + unsigned int flags) { unsigned long long byteval = 0; xmlXPathContextPtr ctxt = NULL; -- 2.17.0

2 2

[libvirt] [PATCH] Add virshAllocpagesPagesizeCompleter to opts_freepages.
by Roland Schulz 24 May '18

24 May '18

Signed-off-by: Roland Schulz <schullzroll(a)gmail.com> --- For the time being virshAllocpagesPagesizeCompleter can be used with other commands that use --pagesize option. tools/virsh-host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/virsh-host.c b/tools/virsh-host.c index dfe58de30..991c0f50a 100644 --- a/tools/virsh-host.c +++ b/tools/virsh-host.c @@ -280,6 +280,7 @@ static const vshCmdOptDef opts_freepages[] = { }, {.name = "pagesize", .type = VSH_OT_INT, + .completer = virshAllocpagesPagesizeCompleter, .help = N_("page size (in kibibytes)") }, {.name = "all", -- 2.17.0

2 1