- Devel - libvirt List Archives

[libvirt PATCH v2] esx: implement connectListAllNetworks
by Pino Toscano 15 Sep '20

15 Sep '20

Implement the .connectListAllNetworks networks API in the esx network driver. Signed-off-by: Pino Toscano <ptoscano(a)redhat.com> --- src/esx/esx_network_driver.c | 69 ++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/src/esx/esx_network_driver.c b/src/esx/esx_network_driver.c index 88843aae2f..a4e738ba72 100644 --- a/src/esx/esx_network_driver.c +++ b/src/esx/esx_network_driver.c @@ -863,6 +863,74 @@ esxNetworkIsPersistent(virNetworkPtr network G_GNUC_UNUSED) +#define MATCH(FLAG) (flags & (FLAG)) +static int +esxConnectListAllNetworks(virConnectPtr conn, + virNetworkPtr **nets, + unsigned int flags) +{ + int ret = -1; + esxPrivate *priv = conn->privateData; + esxVI_HostVirtualSwitch *hostVirtualSwitchList = NULL; + esxVI_HostVirtualSwitch *hostVirtualSwitch = NULL; + size_t count = 0; + size_t i; + + virCheckFlags(VIR_CONNECT_LIST_NETWORKS_FILTERS_ALL, -1); + + /* + * ESX networks are always active, persistent, and + * autostarted, so return zero elements in case we are asked + * for networks different than that. + */ + if (MATCH(VIR_CONNECT_LIST_NETWORKS_FILTERS_ACTIVE) && + !(MATCH(VIR_CONNECT_LIST_NETWORKS_ACTIVE))) + return 0; + if (MATCH(VIR_CONNECT_LIST_NETWORKS_FILTERS_PERSISTENT) && + !(MATCH(VIR_CONNECT_LIST_NETWORKS_PERSISTENT))) + return 0; + if (MATCH(VIR_CONNECT_LIST_NETWORKS_FILTERS_AUTOSTART) && + !(MATCH(VIR_CONNECT_LIST_NETWORKS_AUTOSTART))) + return 0; + + if (esxVI_EnsureSession(priv->primary) < 0 || + esxVI_LookupHostVirtualSwitchList(priv->primary, + &hostVirtualSwitchList) < 0) { + return -1; + } + + for (hostVirtualSwitch = hostVirtualSwitchList; hostVirtualSwitch; + hostVirtualSwitch = hostVirtualSwitch->_next) { + if (nets) { + virNetworkPtr net = virtualswitchToNetwork(conn, hostVirtualSwitch); + if (!net) + goto cleanup; + if (VIR_APPEND_ELEMENT(*nets, count, net) < 0) + goto cleanup; + } else { + ++count; + } + } + + ret = count; + + cleanup: + if (ret < 0) { + if (nets && *nets) { + for (i = 0; i < count; ++i) + VIR_FREE((*nets)[i]); + VIR_FREE(*nets); + } + } + + esxVI_HostVirtualSwitch_Free(&hostVirtualSwitchList); + + return ret; +} +#undef MATCH + + + virNetworkDriver esxNetworkDriver = { .connectNumOfNetworks = esxConnectNumOfNetworks, /* 0.10.0 */ .connectListNetworks = esxConnectListNetworks, /* 0.10.0 */ @@ -877,4 +945,5 @@ virNetworkDriver esxNetworkDriver = { .networkSetAutostart = esxNetworkSetAutostart, /* 0.10.0 */ .networkIsActive = esxNetworkIsActive, /* 0.10.0 */ .networkIsPersistent = esxNetworkIsPersistent, /* 0.10.0 */ + .connectListAllNetworks = esxConnectListAllNetworks, /* 6.8.0 */ }; -- 2.26.2

2 1

[libvirt PATCH 0/3] virsh-completer: Use Glib memory functions (glib chronicles)
by Ján Tomko 15 Sep '20

15 Sep '20

Ján Tomko (3): virsh-completer: use g_clear_pointer in virshCommaStringListComplete virsh-completer: use g_free instead of VIR_FREE virsh-completer: use g_new0 instead of VIR_ALLOC_N tools/virsh-completer-checkpoint.c | 11 ++++---- tools/virsh-completer-domain.c | 44 ++++++++++-------------------- tools/virsh-completer-host.c | 6 ++-- tools/virsh-completer-interface.c | 6 ++-- tools/virsh-completer-network.c | 25 +++++++---------- tools/virsh-completer-nodedev.c | 12 +++----- tools/virsh-completer-nwfilter.c | 12 +++----- tools/virsh-completer-pool.c | 12 +++----- tools/virsh-completer-secret.c | 8 ++---- tools/virsh-completer-snapshot.c | 5 ++-- tools/virsh-completer-volume.c | 5 ++-- tools/virsh-completer.c | 5 ++-- 12 files changed, 55 insertions(+), 96 deletions(-) -- 2.26.2

2 4

[libvirt PATCH] util: virNetDevTapCreate: initialize fd to -1
by Ján Tomko 15 Sep '20

15 Sep '20

Signed-off-by: Ján Tomko <jtomko(a)redhat.com> Fixes: 95089f481e003d971fe0a082018216c58c1b80e5 --- Pushed as trivial. src/util/virnetdevtap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/util/virnetdevtap.c b/src/util/virnetdevtap.c index ab5959c646..cbce5c71b7 100644 --- a/src/util/virnetdevtap.c +++ b/src/util/virnetdevtap.c @@ -322,7 +322,7 @@ int virNetDevTapCreate(char **ifname, size_t i = 0; struct ifreq ifr; int ret = -1; - int fd = 0; + int fd = -1; virMutexLock(&virNetDevTapCreateMutex); -- 2.26.2

2 1

[libvirt PATCH 1/2] esx: generator: add GuestNicInfo object
by Pino Toscano 15 Sep '20

15 Sep '20

Add the definition of the GuestNicInfo object, with all the required objects for it. Signed-off-by: Pino Toscano <ptoscano(a)redhat.com> --- scripts/esx_vi_generator.py | 1 + src/esx/esx_vi_generator.input | 54 ++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) diff --git a/scripts/esx_vi_generator.py b/scripts/esx_vi_generator.py index e0782e35f3..7929e1e682 100755 --- a/scripts/esx_vi_generator.py +++ b/scripts/esx_vi_generator.py @@ -1292,6 +1292,7 @@ additional_object_features = { "DatastoreHostMount": (Object.FEATURE__DEEP_COPY | Object.FEATURE__LIST | Object.FEATURE__ANY_TYPE), "DatastoreInfo": Object.FEATURE__ANY_TYPE | Object.FEATURE__DYNAMIC_CAST, + "GuestNicInfo": Object.FEATURE__LIST | Object.FEATURE__ANY_TYPE, "HostConfigManager": Object.FEATURE__ANY_TYPE, "HostCpuIdInfo": Object.FEATURE__LIST | Object.FEATURE__ANY_TYPE, "HostDatastoreBrowserSearchResults": (Object.FEATURE__LIST | diff --git a/src/esx/esx_vi_generator.input b/src/esx/esx_vi_generator.input index 22c114e0aa..bd6ac72a18 100644 --- a/src/esx/esx_vi_generator.input +++ b/src/esx/esx_vi_generator.input @@ -277,6 +277,18 @@ object FolderFileQuery extends FileQuery end +object GuestNicInfo + Boolean connected r + Int deviceConfigId r + NetDnsConfigInfo dnsConfig o + String ipAddress ol + NetIpConfigInfo ipConfig o + String macAddress o + NetBIOSConfigInfo netBIOSConfig o + String network o +end + + object HostAutoStartManagerConfig AutoStartDefaults defaults o AutoStartPowerInfo powerInfo ol @@ -770,6 +782,48 @@ object NasDatastoreInfo extends DatastoreInfo end +object NetBIOSConfigInfo + String mode r +end + + +object NetDhcpConfigInfo + NetDhcpConfigInfoDhcpOptions ipv4 o + NetDhcpConfigInfoDhcpOptions ipv6 o +end + + +object NetDhcpConfigInfoDhcpOptions + KeyAnyValue config ol + Boolean enable r +end + + +object NetDnsConfigInfo + Boolean dhcp r + String domainName r + String hostName r + String ipAddress ol + String searchDomain ol +end + + +object NetIpConfigInfo + Boolean autoConfigurationEnabled o + NetDhcpConfigInfo dhcp o + NetIpConfigInfoIpAddress ipAddress ol +end + + +object NetIpConfigInfoIpAddress + String ipAddress r + DateTime lifetime o + String origin o + Int prefixLength r + String state o +end + + object ObjectContent ManagedObjectReference obj r DynamicProperty propSet ol -- 2.26.2

2 3

[libvirt PATCH] esx: implement connectListAllNetworks
by Pino Toscano 15 Sep '20

15 Sep '20

Implement the .connectListAllNetworks networks API in the esx network driver. Signed-off-by: Pino Toscano <ptoscano(a)redhat.com> --- src/esx/esx_network_driver.c | 64 ++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/src/esx/esx_network_driver.c b/src/esx/esx_network_driver.c index 88843aae2f..5d9c1e3c2c 100644 --- a/src/esx/esx_network_driver.c +++ b/src/esx/esx_network_driver.c @@ -863,6 +863,69 @@ esxNetworkIsPersistent(virNetworkPtr network G_GNUC_UNUSED) +#define MATCH(FLAG) (flags & (FLAG)) +static int +esxConnectListAllNetworks(virConnectPtr conn, + virNetworkPtr **nets, + unsigned int flags) +{ + int ret = -1; + esxPrivate *priv = conn->privateData; + esxVI_HostVirtualSwitch *hostVirtualSwitchList = NULL; + esxVI_HostVirtualSwitch *hostVirtualSwitch = NULL; + size_t count = 0; + size_t i; + + virCheckFlags(VIR_CONNECT_LIST_NETWORKS_FILTERS_ALL, -1); + + /* + * ESX networks are always active, persistent, and + * autostarted, so return zero elements in case we are asked + * for networks different than that. + */ + if (MATCH(VIR_CONNECT_LIST_NETWORKS_FILTERS_ACTIVE) && + !(MATCH(VIR_CONNECT_LIST_NETWORKS_ACTIVE))) + return 0; + if (MATCH(VIR_CONNECT_LIST_NETWORKS_FILTERS_PERSISTENT) && + !(MATCH(VIR_CONNECT_LIST_NETWORKS_PERSISTENT))) + return 0; + if (MATCH(VIR_CONNECT_LIST_NETWORKS_FILTERS_AUTOSTART) && + !(MATCH(VIR_CONNECT_LIST_NETWORKS_AUTOSTART))) + return 0; + + if (esxVI_EnsureSession(priv->primary) < 0 || + esxVI_LookupHostVirtualSwitchList(priv->primary, + &hostVirtualSwitchList) < 0) { + return -1; + } + + for (hostVirtualSwitch = hostVirtualSwitchList; hostVirtualSwitch; + hostVirtualSwitch = hostVirtualSwitch->_next) { + virNetworkPtr net = virtualswitchToNetwork(conn, hostVirtualSwitch); + + if (VIR_APPEND_ELEMENT(*nets, count, net) < 0) + goto cleanup; + } + + ret = count; + + cleanup: + if (ret < 0) { + if (*nets) { + for (i = 0; i < count; ++i) + VIR_FREE((*nets)[i]); + VIR_FREE(*nets); + } + } + + esxVI_HostVirtualSwitch_Free(&hostVirtualSwitchList); + + return ret; +} +#undef MATCH + + + virNetworkDriver esxNetworkDriver = { .connectNumOfNetworks = esxConnectNumOfNetworks, /* 0.10.0 */ .connectListNetworks = esxConnectListNetworks, /* 0.10.0 */ @@ -877,4 +940,5 @@ virNetworkDriver esxNetworkDriver = { .networkSetAutostart = esxNetworkSetAutostart, /* 0.10.0 */ .networkIsActive = esxNetworkIsActive, /* 0.10.0 */ .networkIsPersistent = esxNetworkIsPersistent, /* 0.10.0 */ + .connectListAllNetworks = esxConnectListAllNetworks, /* 6.8.0 */ }; -- 2.26.2

2 2

[libvirt PATCH v2 0/7] Remove VIR_{ALLOC, ALLOC_N, REALLOC_N}_QUIET macros.
by Tim Wiederhake 14 Sep '20

14 Sep '20

V1: https://www.redhat.com/archives/libvir-list/2020-September/msg00633.html Tim Wiederhake (7): tests: Fix false positive in testConfRoundTrip. util: Use glib memory functions in virErrorCopyNew util: Use glib memory functions in virLastErrorObject util: Remove VIR_ALLOC_QUIET tests: Use glib memory function in testConfRoundTrip util: Use glib memory functions in virJSONValueGetArrayAsBitmap util: Remove VIR_ALLOC_N_QUIET src/util/viralloc.h | 29 ----------------------------- src/util/virerror.c | 15 ++++----------- src/util/virjson.c | 3 +-- tests/virconftest.c | 28 +++++++++------------------- 4 files changed, 14 insertions(+), 61 deletions(-) -- 2.26.2

2 9

[libvirt PATCH 0/3] fix a memory leak on qemuProcessReconnect
by Ján Tomko 14 Sep '20

14 Sep '20

The first two patches have no functional impact on current code. Ján Tomko (3): qemu: rename qemuDomainObjFreeJob -> qemuDomainObjClearJob qemu: qemuDomainObjClearJob: use g_clear_pointer qemuProcessReconnect: clear 'oldjob' src/qemu/qemu_domain.c | 2 +- src/qemu/qemu_domainjob.c | 7 +++++-- src/qemu/qemu_domainjob.h | 3 ++- src/qemu/qemu_process.c | 2 +- 4 files changed, 9 insertions(+), 5 deletions(-) -- 2.26.2

2 5

[PATCH v2] cphp: remove deprecated cpu-add command(s)
by Igor Mammedov 14 Sep '20

14 Sep '20

theses were deprecated since 4.0, remove both HMP and QMP variants. Users should use device_add command instead. To get list of possible CPUs and options, use 'info hotpluggable-cpus' HMP or query-hotpluggable-cpus QMP command. Signed-off-by: Igor Mammedov <imammedo(a)redhat.com> Reviewed-by: Thomas Huth <thuth(a)redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert(a)redhat.com> --- include/hw/boards.h | 1 - include/hw/i386/pc.h | 1 - include/monitor/hmp.h | 1 - docs/system/deprecated.rst | 25 +++++---- hmp-commands.hx | 15 ------ hw/core/machine-hmp-cmds.c | 12 ----- hw/core/machine-qmp-cmds.c | 12 ----- hw/i386/pc.c | 27 ---------- hw/i386/pc_piix.c | 1 - hw/s390x/s390-virtio-ccw.c | 12 ----- qapi/machine.json | 24 --------- tests/qtest/cpu-plug-test.c | 100 ++++-------------------------------- tests/qtest/test-hmp.c | 1 - 13 files changed, 21 insertions(+), 211 deletions(-) diff --git a/include/hw/boards.h b/include/hw/boards.h index 795910d01b..7abd5d889c 100644 --- a/include/hw/boards.h +++ b/include/hw/boards.h @@ -169,7 +169,6 @@ struct MachineClass { void (*init)(MachineState *state); void (*reset)(MachineState *state); void (*wakeup)(MachineState *state); - void (*hot_add_cpu)(MachineState *state, const int64_t id, Error **errp); int (*kvm_type)(MachineState *machine, const char *arg); void (*smp_parse)(MachineState *ms, QemuOpts *opts); diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h index 421a77acc2..79b7ab17bc 100644 --- a/include/hw/i386/pc.h +++ b/include/hw/i386/pc.h @@ -135,7 +135,6 @@ extern int fd_bootchk; void pc_acpi_smi_interrupt(void *opaque, int irq, int level); -void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp); void pc_smp_parse(MachineState *ms, QemuOpts *opts); void pc_guest_info_init(PCMachineState *pcms); diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h index c986cfd28b..642e9e91f9 100644 --- a/include/monitor/hmp.h +++ b/include/monitor/hmp.h @@ -89,7 +89,6 @@ void hmp_chardev_add(Monitor *mon, const QDict *qdict); void hmp_chardev_change(Monitor *mon, const QDict *qdict); void hmp_chardev_remove(Monitor *mon, const QDict *qdict); void hmp_chardev_send_break(Monitor *mon, const QDict *qdict); -void hmp_cpu_add(Monitor *mon, const QDict *qdict); void hmp_object_add(Monitor *mon, const QDict *qdict); void hmp_object_del(Monitor *mon, const QDict *qdict); void hmp_info_memdev(Monitor *mon, const QDict *qdict); diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index a158e765c3..c43c53f432 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -284,13 +284,6 @@ The ``query-cpus`` command is replaced by the ``query-cpus-fast`` command. The ``arch`` output member of the ``query-cpus-fast`` command is replaced by the ``target`` output member. -``cpu-add`` (since 4.0) -''''''''''''''''''''''' - -Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See -documentation of ``query-hotpluggable-cpus`` for additional -details. - ``query-events`` (since 4.0) '''''''''''''''''''''''''''' @@ -306,12 +299,6 @@ the 'wait' field, which is only applicable to sockets in server mode Human Monitor Protocol (HMP) commands ------------------------------------- -``cpu-add`` (since 4.0) -''''''''''''''''''''''' - -Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See -documentation of ``query-hotpluggable-cpus`` for additional details. - ``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0) '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' @@ -521,6 +508,12 @@ QEMU Machine Protocol (QMP) commands The "autoload" parameter has been ignored since 2.12.0. All bitmaps are automatically loaded from qcow2 images. +``cpu-add`` (removed in 5.2) +'''''''''''''''''''''''''''' + +Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See +documentation of ``query-hotpluggable-cpus`` for additional details. + Human Monitor Protocol (HMP) commands ------------------------------------- @@ -530,6 +523,12 @@ The ``hub_id`` parameter of ``hostfwd_add`` / ``hostfwd_remove`` (removed in 5.0 The ``[hub_id name]`` parameter tuple of the 'hostfwd_add' and 'hostfwd_remove' HMP commands has been replaced by ``netdev_id``. +``cpu-add`` (removed in 5.2) +'''''''''''''''''''''''''''' + +Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See +documentation of ``query-hotpluggable-cpus`` for additional details. + Guest Emulator ISAs ------------------- diff --git a/hmp-commands.hx b/hmp-commands.hx index 60f395c276..d1e3e0e1c6 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -1761,21 +1761,6 @@ SRST Executes a qemu-io command on the given block device. ERST - { - .name = "cpu-add", - .args_type = "id:i", - .params = "id", - .help = "add cpu (deprecated, use device_add instead)", - .cmd = hmp_cpu_add, - }, - -SRST -``cpu-add`` *id* - Add CPU with id *id*. This command is deprecated, please - +use ``device_add`` instead. For details, refer to - 'docs/cpu-hotplug.rst'. -ERST - { .name = "qom-list", .args_type = "path:s?", diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index 39999c47c5..f4092b98cc 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -46,18 +46,6 @@ void hmp_info_cpus(Monitor *mon, const QDict *qdict) qapi_free_CpuInfoFastList(cpu_list); } -void hmp_cpu_add(Monitor *mon, const QDict *qdict) -{ - int cpuid; - Error *err = NULL; - - error_report("cpu_add is deprecated, please use device_add instead"); - - cpuid = qdict_get_int(qdict, "id"); - qmp_cpu_add(cpuid, &err); - hmp_handle_error(mon, err); -} - void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict) { Error *err = NULL; diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c index 21551221ad..5362c80a18 100644 --- a/hw/core/machine-qmp-cmds.c +++ b/hw/core/machine-qmp-cmds.c @@ -284,18 +284,6 @@ HotpluggableCPUList *qmp_query_hotpluggable_cpus(Error **errp) return machine_query_hotpluggable_cpus(ms); } -void qmp_cpu_add(int64_t id, Error **errp) -{ - MachineClass *mc; - - mc = MACHINE_GET_CLASS(current_machine); - if (mc->hot_add_cpu) { - mc->hot_add_cpu(current_machine, id, errp); - } else { - error_setg(errp, "Not supported"); - } -} - void qmp_set_numa_node(NumaOptions *cmd, Error **errp) { if (!runstate_check(RUN_STATE_PRECONFIG)) { diff --git a/hw/i386/pc.c b/hw/i386/pc.c index d11daacc23..d071da787b 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -777,32 +777,6 @@ void pc_smp_parse(MachineState *ms, QemuOpts *opts) } } -void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp) -{ - X86MachineState *x86ms = X86_MACHINE(ms); - int64_t apic_id = x86_cpu_apic_id_from_index(x86ms, id); - Error *local_err = NULL; - - if (id < 0) { - error_setg(errp, "Invalid CPU id: %" PRIi64, id); - return; - } - - if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) { - error_setg(errp, "Unable to add CPU: %" PRIi64 - ", resulting APIC ID (%" PRIi64 ") is too large", - id, apic_id); - return; - } - - - x86_cpu_new(X86_MACHINE(ms), apic_id, &local_err); - if (local_err) { - error_propagate(errp, local_err); - return; - } -} - static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count) { if (cpus_count > 0xff) { @@ -1966,7 +1940,6 @@ static void pc_machine_class_init(ObjectClass *oc, void *data) mc->auto_enable_numa_with_memdev = true; mc->has_hotpluggable_cpus = true; mc->default_boot_order = "cad"; - mc->hot_add_cpu = pc_hot_add_cpu; mc->smp_parse = pc_smp_parse; mc->block_default_type = IF_IDE; mc->max_cpus = 255; diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c index 33fa035fb7..8ce7dda464 100644 --- a/hw/i386/pc_piix.c +++ b/hw/i386/pc_piix.c @@ -752,7 +752,6 @@ static void pc_i440fx_1_4_machine_options(MachineClass *m) { pc_i440fx_1_5_machine_options(m); m->hw_version = "1.4.0"; - m->hot_add_cpu = NULL; compat_props_add(m->compat_props, pc_compat_1_4, pc_compat_1_4_len); } diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c index 3106bbea33..28266a3a35 100644 --- a/hw/s390x/s390-virtio-ccw.c +++ b/hw/s390x/s390-virtio-ccw.c @@ -553,17 +553,6 @@ static HotplugHandler *s390_get_hotplug_handler(MachineState *machine, return NULL; } -static void s390_hot_add_cpu(MachineState *machine, - const int64_t id, Error **errp) -{ - ObjectClass *oc; - - g_assert(machine->possible_cpus->cpus[0].cpu); - oc = OBJECT_CLASS(CPU_GET_CLASS(machine->possible_cpus->cpus[0].cpu)); - - s390x_new_cpu(object_class_get_name(oc), id, errp); -} - static void s390_nmi(NMIState *n, int cpu_index, Error **errp) { CPUState *cs = qemu_get_cpu(cpu_index); @@ -604,7 +593,6 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data) s390mc->hpage_1m_allowed = true; mc->init = ccw_init; mc->reset = s390_machine_reset; - mc->hot_add_cpu = s390_hot_add_cpu; mc->block_default_type = IF_VIRTIO; mc->no_cdrom = 1; mc->no_floppy = 1; diff --git a/qapi/machine.json b/qapi/machine.json index 0ac1880e4a..d8ed096e9a 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -307,30 +307,6 @@ ## { 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] } -## -# @cpu-add: -# -# Adds CPU with specified ID. -# -# @id: ID of CPU to be created, valid values [0..max_cpus) -# -# Features: -# @deprecated: This command is deprecated. Use `device_add` instead. -# See the `query-hotpluggable-cpus` command for details. -# -# Returns: Nothing on success -# -# Since: 1.5 -# -# Example: -# -# -> { "execute": "cpu-add", "arguments": { "id": 2 } } -# <- { "return": {} } -# -## -{ 'command': 'cpu-add', 'data': {'id': 'int'}, - 'features': [ 'deprecated' ] } - ## # @MachineInfo: # diff --git a/tests/qtest/cpu-plug-test.c b/tests/qtest/cpu-plug-test.c index e8ffbbce4b..a1c689414b 100644 --- a/tests/qtest/cpu-plug-test.c +++ b/tests/qtest/cpu-plug-test.c @@ -25,54 +25,6 @@ struct PlugTestData { }; typedef struct PlugTestData PlugTestData; -static void test_plug_with_cpu_add(gconstpointer data) -{ - const PlugTestData *s = data; - char *args; - QDict *response; - unsigned int i; - - args = g_strdup_printf("-machine %s -cpu %s " - "-smp 1,sockets=%u,cores=%u,threads=%u,maxcpus=%u", - s->machine, s->cpu_model, - s->sockets, s->cores, s->threads, s->maxcpus); - qtest_start(args); - - for (i = 1; i < s->maxcpus; i++) { - response = qmp("{ 'execute': 'cpu-add'," - " 'arguments': { 'id': %d } }", i); - g_assert(response); - g_assert(!qdict_haskey(response, "error")); - qobject_unref(response); - } - - qtest_end(); - g_free(args); -} - -static void test_plug_without_cpu_add(gconstpointer data) -{ - const PlugTestData *s = data; - char *args; - QDict *response; - - args = g_strdup_printf("-machine %s -cpu %s " - "-smp 1,sockets=%u,cores=%u,threads=%u,maxcpus=%u", - s->machine, s->cpu_model, - s->sockets, s->cores, s->threads, s->maxcpus); - qtest_start(args); - - response = qmp("{ 'execute': 'cpu-add'," - " 'arguments': { 'id': %d } }", - s->sockets * s->cores * s->threads); - g_assert(response); - g_assert(qdict_haskey(response, "error")); - qobject_unref(response); - - qtest_end(); - g_free(args); -} - static void test_plug_with_device_add(gconstpointer data) { const PlugTestData *td = data; @@ -144,36 +96,13 @@ static void add_pc_test_case(const char *mname) data->cores = 3; data->threads = 2; data->maxcpus = data->sockets * data->cores * data->threads; - if (g_str_has_suffix(mname, "-1.4") || - (strcmp(mname, "pc-1.3") == 0) || - (strcmp(mname, "pc-1.2") == 0) || - (strcmp(mname, "pc-1.1") == 0) || - (strcmp(mname, "pc-1.0") == 0)) { - path = g_strdup_printf("cpu-plug/%s/init/%ux%ux%u&maxcpus=%u", - mname, data->sockets, data->cores, - data->threads, data->maxcpus); - qtest_add_data_func_full(path, data, test_plug_without_cpu_add, - test_data_free); - g_free(path); - } else { - PlugTestData *data2 = g_memdup(data, sizeof(PlugTestData)); - - data2->machine = g_strdup(data->machine); - data2->device_model = g_strdup(data->device_model); - path = g_strdup_printf("cpu-plug/%s/cpu-add/%ux%ux%u&maxcpus=%u", - mname, data->sockets, data->cores, - data->threads, data->maxcpus); - qtest_add_data_func_full(path, data, test_plug_with_cpu_add, - test_data_free); - g_free(path); - path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", - mname, data2->sockets, data2->cores, - data2->threads, data2->maxcpus); - qtest_add_data_func_full(path, data2, test_plug_with_device_add, - test_data_free); - g_free(path); - } + path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", + mname, data->sockets, data->cores, + data->threads, data->maxcpus); + qtest_add_data_func_full(path, data, test_plug_with_device_add, + test_data_free); + g_free(path); } static void add_pseries_test_case(const char *mname) @@ -205,7 +134,7 @@ static void add_pseries_test_case(const char *mname) static void add_s390x_test_case(const char *mname) { char *path; - PlugTestData *data, *data2; + PlugTestData *data; if (!g_str_has_prefix(mname, "s390-ccw-virtio-")) { return; @@ -220,21 +149,10 @@ static void add_s390x_test_case(const char *mname) data->threads = 1; data->maxcpus = data->sockets * data->cores * data->threads; - data2 = g_memdup(data, sizeof(PlugTestData)); - data2->machine = g_strdup(data->machine); - data2->device_model = g_strdup(data->device_model); - - path = g_strdup_printf("cpu-plug/%s/cpu-add/%ux%ux%u&maxcpus=%u", + path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", mname, data->sockets, data->cores, data->threads, data->maxcpus); - qtest_add_data_func_full(path, data, test_plug_with_cpu_add, - test_data_free); - g_free(path); - - path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", - mname, data2->sockets, data2->cores, - data2->threads, data2->maxcpus); - qtest_add_data_func_full(path, data2, test_plug_with_device_add, + qtest_add_data_func_full(path, data, test_plug_with_device_add, test_data_free); g_free(path); } diff --git a/tests/qtest/test-hmp.c b/tests/qtest/test-hmp.c index aea1384bac..94a8023173 100644 --- a/tests/qtest/test-hmp.c +++ b/tests/qtest/test-hmp.c @@ -27,7 +27,6 @@ static const char *hmp_cmds[] = { "chardev-change testchardev1 ringbuf", "chardev-remove testchardev1", "commit all", - "cpu-add 1", "cpu 0", "device_add ?", "device_add usb-mouse,id=mouse1", -- 2.27.0

3 3

Issues with building libvirt v6.7.0 on RHEL8.3
by Eli Cohen 14 Sep '20

14 Sep '20

Hello all, I hope this is being posted in the right mailing list. I am trying to build libvirt v6.7.0 on RHEL8.3 x86_64 server in order to later apply patches for VDPA support posted recently by Jonathon Jongsma <jjongsma(a)redhat.com>. I am following the instrutions in https://libvirt.org/contribute.html and running from the root directory: meson build --prefix=/usr I fail on the following error: meson.build:921:2: ERROR: Program 'rpcgen portable-rpcgen' not found I can't find any reference how to overcome this obstacle. Thanks for any help, Eli

3 12

[libvirt] [PATCH 00/17] virsh bash completion improvements
by Lin Ma 14 Sep '20

14 Sep '20

Lin Ma (17): virshDomainNameCompleter: Add some of VIR_CONNECT_LIST_DOMAINS_ flags virsh: snapshot: Only return domains that have snapshot images virsh: managedsave-*: Only return domains that have a managed save image virsh: checkpoint: Only return domains that have checkpoints virsh: Add event completer to --enable/--disable args of perf command vshReadlineParse: Ignore vshReadlineOptionsGenerator for VSH_OT_INT options virsh: Add network uuid completion to network-name command virsh: Add domain uuid completion to domname command virsh: Add iothread IDs completion to iothread* commands virsh: Add completion for --iothread argument of attach-disk command virsh: Add vcpu IDs completion to vcpupin command virsh: Add vcpu list completion to setvcpu command virsh: Add logical CPU list completion for --cpulist argument virsh: limit completion of net-dhcp-leases to active networks virsh: limit completion of net-port* to active networks virsh: limit completion of backup-{begin, dumpxml} to active domains virsh: limit completion of checkpoint-{create, delete} to active domains tools/virsh-backup.c | 4 +- tools/virsh-checkpoint.c | 17 +- tools/virsh-completer-domain.c | 264 +++++++++++++++++++++++++++++++- tools/virsh-completer-domain.h | 31 ++++ tools/virsh-completer-network.c | 42 +++++ tools/virsh-completer-network.h | 4 + tools/virsh-domain.c | 33 +++- tools/virsh-network.c | 12 +- tools/virsh-snapshot.c | 16 +- tools/vsh.c | 1 + 10 files changed, 395 insertions(+), 29 deletions(-) -- 2.26.0

2 20

[PATCH 00/17] qemu: Fix startup of VM with SCSI hostdev with long user-provided alias
by Peter Krempa 14 Sep '20

14 Sep '20

Device alias was used to generate the backend nodename. This doesn't work well if somebody specifies a very long useralias since qemu limits nodename to 32 bytes. Stop basing the nodename on the alias. Peter Krempa (17): virDomainHostdevSubsysSCSIiSCSIClear: Inline contents into only caller virDomainStorageNetworkParseHosts: Switch to a more modern XML parsing approach virDomainHostdevSubsysSCSIHostDefParseXML: Switch to a more modern XML parsing approach syntax-check: Don't forbid curly braces around single line condition body qemuxml2argvtest: hostdev-scsi-virtio-scsi: Add hostdev with useralias conf: Add virStorageSource member for SCSI host device config data tests: qemustatusxml2xmldata: Rename 'disk-secinfo-upgrade' case to 'upgrade' tests: qemustatusxml2xmldata: Add local SCSI hostdev to 'upgrade' case qemu: domain: Fill in (i)SCSI backend nodename if it is not present in status XML qemuBuildHostdevSCSI(A|De)tachPrepare: Use virStorageSource in def for SCSI hostdevs qemuBlockStorageSourceAttachData: remove 'storageNodeNameCopy' qemu: domain: Extract preparation of hostdev specific data to a separate function qemuDomainSecretHostdevPrepare: remove qemuDomainPrepareHostdev: Allocate backend nodenames in the prepare function qemuDomainPrepareHostdev: base hostdev secret object names on backend alias qemuDomainPrepareHostdev: Don't base backend nodename on device alias qemuxml2argvtest: hostdev-scsi-virtio-scsi: Use longer user-alias for SCSI hostdev build-aux/check-spacing.pl | 36 ---- docs/coding-style.rst | 8 +- src/conf/domain_conf.c | 170 ++++++++--------- src/conf/domain_conf.h | 1 + src/qemu/qemu_block.c | 1 - src/qemu/qemu_block.h | 1 - src/qemu/qemu_command.c | 74 +++++--- src/qemu/qemu_domain.c | 176 ++++++++++++------ src/qemu/qemu_domain.h | 8 +- src/qemu/qemu_hotplug.c | 2 +- src/qemu/qemu_process.c | 21 +++ tests/qemustatusxml2xmldata/modern-in.xml | 1 + ...-secinfo-upgrade-in.xml => upgrade-in.xml} | 9 + ...ecinfo-upgrade-out.xml => upgrade-out.xml} | 20 ++ .../hostdev-scsi-lsi.x86_64-latest.args | 38 ++-- ...hostdev-scsi-virtio-scsi.x86_64-2.8.0.args | 5 + ...hostdev-scsi-virtio-scsi.x86_64-4.1.0.args | 5 + ...ostdev-scsi-virtio-scsi.x86_64-latest.args | 36 ++-- .../hostdev-scsi-virtio-scsi.xml | 8 + .../hostdev-scsi-virtio-scsi.xml | 8 + tests/qemuxml2xmltest.c | 2 +- 21 files changed, 370 insertions(+), 260 deletions(-) rename tests/qemustatusxml2xmldata/{disk-secinfo-upgrade-in.xml => upgrade-in.xml} (98%) rename tests/qemustatusxml2xmldata/{disk-secinfo-upgrade-out.xml => upgrade-out.xml} (96%) -- 2.26.2

2 35

[PATCH 0/5] Support CSS and DASD devices in node_device driver
by Bjoern Walk 14 Sep '20

14 Sep '20

This series enables support for channel subsystem (CSS) devices, Direct Access Storage Devices (DASDs) in the node_device driver and adds support to create vfio-ccw mdev devices in the node_device driver. Boris Fiuczynski (5): node_device: refactor udevProcessCCW node_device: detect CSS devices virsh: nodedev: ability to filter CSS capabilities node_device: detect DASD devices node_device: mdev vfio-ccw support docs/formatnode.html.in | 12 +++ docs/manpages/virsh.rst | 2 +- docs/schemas/nodedev.rng | 16 ++++ include/libvirt/libvirt-nodedev.h | 1 + src/conf/domain_addr.c | 2 +- src/conf/domain_addr.h | 3 + src/conf/node_device_conf.c | 5 ++ src/conf/node_device_conf.h | 4 +- src/conf/virnodedeviceobj.c | 4 +- src/libvirt-nodedev.c | 1 + src/libvirt_private.syms | 1 + src/node_device/node_device_driver.c | 49 +++++++++--- src/node_device/node_device_udev.c | 77 ++++++++++++++++--- .../ccw_0_0_10000-invalid.xml | 4 +- tests/nodedevschemadata/ccw_0_0_ffff.xml | 4 +- tests/nodedevschemadata/css_0_0_ffff.xml | 10 +++ tests/nodedevxml2xmltest.c | 1 + tools/virsh-nodedev.c | 3 + 18 files changed, 172 insertions(+), 27 deletions(-) create mode 100644 tests/nodedevschemadata/css_0_0_ffff.xml -- 2.24.1

4 30

[libvirt PATCH v2] esx: improve some of the virErrorNumber used
by Pino Toscano 14 Sep '20

14 Sep '20

A lot of virReportError() calls use VIR_ERR_INTERNAL_ERROR to represent the number of the error, even in cases where there is one fitting more. Hence, replace some of them with better virErrorNumber values. Signed-off-by: Pino Toscano <ptoscano(a)redhat.com> --- Changes in v2: - remove some of the VIR_ERR_INTERNAL_ERROR -> VIR_ERR_INVALID_ARG changes as they refer to really internal bits src/esx/esx_network_driver.c | 4 ++-- src/esx/esx_storage_backend_iscsi.c | 4 ++-- src/esx/esx_storage_backend_vmfs.c | 12 ++++++------ src/esx/esx_util.c | 2 +- src/esx/esx_vi.c | 2 +- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/src/esx/esx_network_driver.c b/src/esx/esx_network_driver.c index d46fc9253d..88843aae2f 100644 --- a/src/esx/esx_network_driver.c +++ b/src/esx/esx_network_driver.c @@ -355,7 +355,7 @@ esxNetworkDefineXML(virConnectPtr conn, const char *xml) for (hostPortGroup = hostPortGroupList; hostPortGroup; hostPortGroup = hostPortGroup->_next) { if (STREQ(def->portGroups[i].name, hostPortGroup->spec->name)) { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NETWORK_EXIST, _("HostPortGroup with name '%s' exists already"), def->portGroups[i].name); goto cleanup; @@ -388,7 +388,7 @@ esxNetworkDefineXML(virConnectPtr conn, const char *xml) if (def->forward.ifs[i].type != VIR_NETWORK_FORWARD_HOSTDEV_DEVICE_NETDEV) { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_SUPPORT, _("unsupported device type in network %s " "interface pool"), def->name); diff --git a/src/esx/esx_storage_backend_iscsi.c b/src/esx/esx_storage_backend_iscsi.c index 395a347cf3..017b800f06 100644 --- a/src/esx/esx_storage_backend_iscsi.c +++ b/src/esx/esx_storage_backend_iscsi.c @@ -321,7 +321,7 @@ esxStoragePoolGetXMLDesc(virStoragePoolPtr pool, unsigned int flags) if (!target) { /* pool not found */ - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_STORAGE_POOL, _("Could not find storage pool with name '%s'"), pool->name); goto cleanup; @@ -699,7 +699,7 @@ esxStorageVolGetXMLDesc(virStorageVolPtr volume, } if (!scsiLun) { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_STORAGE_VOL, _("Could find volume with name: %s"), volume->name); goto cleanup; } diff --git a/src/esx/esx_storage_backend_vmfs.c b/src/esx/esx_storage_backend_vmfs.c index 4f613bf93b..a98001d6b2 100644 --- a/src/esx/esx_storage_backend_vmfs.c +++ b/src/esx/esx_storage_backend_vmfs.c @@ -897,7 +897,7 @@ esxStorageVolCreateXML(virStoragePoolPtr pool, goto cleanup; if (def->type != VIR_STORAGE_VOL_FILE) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + virReportError(VIR_ERR_NO_SUPPORT, "%s", _("Creating non-file volumes is not supported")); goto cleanup; } @@ -913,7 +913,7 @@ esxStorageVolCreateXML(virStoragePoolPtr pool, } if (!virStringHasCaseSuffix(def->name, ".vmdk")) { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_SUPPORT, _("Volume name '%s' has unsupported suffix, " "expecting '.vmdk'"), def->name); goto cleanup; @@ -1032,7 +1032,7 @@ esxStorageVolCreateXML(virStoragePoolPtr pool, key = g_strdup(datastorePath); } } else { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_SUPPORT, _("Creation of %s volumes is not supported"), virStorageFileFormatTypeToString(def->target.format)); goto cleanup; @@ -1111,7 +1111,7 @@ esxStorageVolCreateXMLFrom(virStoragePoolPtr pool, goto cleanup; if (def->type != VIR_STORAGE_VOL_FILE) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + virReportError(VIR_ERR_NO_SUPPORT, "%s", _("Creating non-file volumes is not supported")); goto cleanup; } @@ -1127,7 +1127,7 @@ esxStorageVolCreateXMLFrom(virStoragePoolPtr pool, } if (!virStringHasCaseSuffix(def->name, ".vmdk")) { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_SUPPORT, _("Volume name '%s' has unsupported suffix, " "expecting '.vmdk'"), def->name); goto cleanup; @@ -1212,7 +1212,7 @@ esxStorageVolCreateXMLFrom(virStoragePoolPtr pool, key = g_strdup(datastorePath); } } else { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_NO_SUPPORT, _("Creation of %s volumes is not supported"), virStorageFileFormatTypeToString(def->target.format)); goto cleanup; diff --git a/src/esx/esx_util.c b/src/esx/esx_util.c index 11f43acc19..cd3d8925b9 100644 --- a/src/esx/esx_util.c +++ b/src/esx/esx_util.c @@ -226,7 +226,7 @@ esxUtil_ParseDatastorePath(const char *datastorePath, char **datastoreName, /* Expected format: '[<datastore>] <path>' where <path> is optional */ if (!(tmp = STRSKIP(copyOfDatastorePath, "[")) || *tmp == ']' || !(preliminaryDatastoreName = strtok_r(tmp, "]", &saveptr))) { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_INVALID_ARG, _("Datastore path '%s' doesn't have expected format " "'[<datastore>] <path>'"), datastorePath); goto cleanup; diff --git a/src/esx/esx_vi.c b/src/esx/esx_vi.c index a4f3be02a4..f099716d3e 100644 --- a/src/esx/esx_vi.c +++ b/src/esx/esx_vi.c @@ -1390,7 +1390,7 @@ esxVI_Context_Execute(esxVI_Context *ctx, const char *methodName, } } } else { - virReportError(VIR_ERR_INTERNAL_ERROR, + virReportError(VIR_ERR_HTTP_ERROR, _("HTTP response code %d for call to '%s'"), (*response)->responseCode, methodName); goto cleanup; -- 2.26.2

2 1

[libvirt PATCH v2] esx: generator: fix free of elements in lists
by Pino Toscano 14 Sep '20

14 Sep '20

When a list is freed, we iterate through all the items, invoking the free function for each; the actual free function called for each element is the function of the actual type of each element, and thus the @_next pointer in the element struct has the same type as the element itself. Currently, the free function gets the parent of the current element type, and invoke its free function to continue freeing the list. However, in case the hierarchy of the classes has more than 1 level (i.e. Class <- SubClass <- SubSubClass), the invoked free function is only the parent class' one, and not the actual base class of the hierarchy. To fix that, change the generator to get the base class of a class, and invoking that instead. Also, avoid to set the @_next back, as it is not needed. Fixes commits 5cff36e39ae691fbd7c40597df1732eecf294150 and f76c6dde2e33233566e886d96e76b5fe0c102d9a. Signed-off-by: Pino Toscano <ptoscano(a)redhat.com> --- Changes in v2: - ancestor -> base class scripts/esx_vi_generator.py | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/scripts/esx_vi_generator.py b/scripts/esx_vi_generator.py index 863c8af964..e0782e35f3 100755 --- a/scripts/esx_vi_generator.py +++ b/scripts/esx_vi_generator.py @@ -751,13 +751,13 @@ class Object(GenericObject): source += "{\n" if self.features & Object.FEATURE__LIST: - if self.extends is not None: + base_class = get_base_class(self) + if base_class: # avoid "dereferencing type-punned pointer will break # strict-aliasing rules" warnings - source += " esxVI_%s *next = (esxVI_%s *)item->_next;\n\n" \ - % (self.extends, self.extends) - source += " esxVI_%s_Free(&next);\n" % self.extends - source += " item->_next = (esxVI_%s *)next;\n\n" % self.name + source += " esxVI_%s *baseNext = (esxVI_%s *)item->_next;\n" \ + % (base_class, base_class) + source += " esxVI_%s_Free(&baseNext);\n\n" % base_class else: source += " esxVI_%s_Free(&item->_next);\n\n" % self.name @@ -1250,6 +1250,21 @@ def is_known_type(type): type in enums_by_name) +def get_base_class(obj): + if not obj.extends: + return None + base_class = None + try: + base_class = base_class_by_name[obj.extends] + except KeyError: + parent = objects_by_name[obj.extends] + base_class = get_base_class(parent) + if not base_class: + base_class = parent.name + base_class_by_name[name] = base_class + return base_class + + def open_file(filename): return open(filename, "wt") @@ -1341,6 +1356,7 @@ managed_objects_by_name = {} enums_by_name = {} methods_by_name = {} block = None +base_class_by_name = {} # parse input file -- 2.26.2

2 1

[PATCH v2] network: Only check kernel added routes in virNetDevIPCheckIPv6Forwarding
by Ian Wienand 14 Sep '20

14 Sep '20

The original motivation for adding virNetDevIPCheckIPv6Forwarding (00d28a78b5d1f6eaf79f06ac59e31c568af9da37) was that networking routes would disappear when ipv6 forwarding was enabled for an interface. This is a fairly undocumented side-effect of the "accept_ra" sysctl for an interface. 1 means the interface will accept_ra's if not forwarding, 2 means always accept_RAs; but it is not explained that enabling forwarding when accept_ra==1 will also clear any kernel RA assigned routes, very likely breaking your networking. The check to warn about this currently uses netlink to go through all the routes and then look at the accept_ra status of the interfaces. However, it has been noticed that this problem does not affect systems where IPv6 RA configuration is handled in userspace, e.g. via tools such as NetworkManager. In this case, the error message from libvirt is spurious, and modifying the forwarding state will not affect the RA state or disable your networking. If you refer to the function rt6_purge_dflt_routers() in the kernel, we can see that the routes being purged are only those with the kernel's RTF_ADDRCONF flag set; that is, routes added by the kernel's RA handling. Why does it do this? I think this is a Linux implementation decision; it has always been like that and there are some comments suggesting that it is because a router should be statically configured, rather than accepting external configurations. The solution implemented here is to convert the existing check into a walk of /proc/net/ipv6_route and look for routes with this flag set. We then check the accept_ra status for the interface, and if enabling forwarding would break things raise an error. This should hopefully avoid "interactive" users, who are likely to be using NetworkManager and the like, having false warnings when enabling IPv6, but retain the error check for users relying on kernel-based IPv6 interface auto-configuration. Signed-off-by: Ian Wienand <iwienand(a)redhat.com> --- src/util/virnetdevip.c | 323 ++++++++++++++++------------------------- 1 file changed, 124 insertions(+), 199 deletions(-) diff --git a/src/util/virnetdevip.c b/src/util/virnetdevip.c index 7bd5a75f85..e208089bd6 100644 --- a/src/util/virnetdevip.c +++ b/src/util/virnetdevip.c @@ -43,8 +43,11 @@ #ifdef __linux__ # include <linux/sockios.h> # include <linux/if_vlan.h> +# include <linux/ipv6_route.h> #endif +#define PROC_NET_IPV6_ROUTE "/proc/net/ipv6_route" + #define VIR_FROM_THIS VIR_FROM_NONE VIR_LOG_INIT("util.netdevip"); @@ -370,203 +373,6 @@ virNetDevIPRouteAdd(const char *ifname, } -static int -virNetDevIPGetAcceptRA(const char *ifname) -{ - g_autofree char *path = NULL; - g_autofree char *buf = NULL; - char *suffix; - int accept_ra = -1; - - path = g_strdup_printf("/proc/sys/net/ipv6/conf/%s/accept_ra", - ifname ? ifname : "all"); - - if ((virFileReadAll(path, 512, &buf) < 0) || - (virStrToLong_i(buf, &suffix, 10, &accept_ra) < 0)) - return -1; - - return accept_ra; -} - -struct virNetDevIPCheckIPv6ForwardingData { - bool hasRARoutes; - - /* Devices with conflicting accept_ra */ - char **devices; - size_t ndevices; -}; - - -static int -virNetDevIPCheckIPv6ForwardingAddIF(struct virNetDevIPCheckIPv6ForwardingData *data, - char **ifname) -{ - size_t i; - - /* add ifname to the array if it's not already there - * (ifname is char** so VIR_APPEND_ELEMENT() will move the - * original pointer out of the way and avoid having it freed) - */ - for (i = 0; i < data->ndevices; i++) { - if (STREQ(data->devices[i], *ifname)) - return 0; - } - return VIR_APPEND_ELEMENT(data->devices, data->ndevices, *ifname); -} - - -static int -virNetDevIPCheckIPv6ForwardingCallback(struct nlmsghdr *resp, - void *opaque) -{ - struct rtmsg *rtmsg = NLMSG_DATA(resp); - struct virNetDevIPCheckIPv6ForwardingData *data = opaque; - struct rtattr *rta_attr; - int accept_ra = -1; - int ifindex = -1; - g_autofree char *ifname = NULL; - - /* Ignore messages other than route ones */ - if (resp->nlmsg_type != RTM_NEWROUTE) - return 0; - - /* No need to do anything else for non RA routes */ - if (rtmsg->rtm_protocol != RTPROT_RA) - return 0; - - rta_attr = (struct rtattr *)nlmsg_find_attr(resp, sizeof(struct rtmsg), RTA_OIF); - if (rta_attr) { - /* This is a single path route, with interface used to reach - * nexthop in the RTA_OIF attribute. - */ - ifindex = *(int *)RTA_DATA(rta_attr); - ifname = virNetDevGetName(ifindex); - - if (!ifname) - return -1; - - accept_ra = virNetDevIPGetAcceptRA(ifname); - - VIR_DEBUG("Checking route for device %s (%d), accept_ra: %d", - ifname, ifindex, accept_ra); - - if (accept_ra != 2 && virNetDevIPCheckIPv6ForwardingAddIF(data, &ifname) < 0) - return -1; - - data->hasRARoutes = true; - return 0; - } - - /* if no RTA_OIF was found, see if this is a multipath route (one - * which has an array of nexthops, each with its own interface) - */ - - rta_attr = (struct rtattr *)nlmsg_find_attr(resp, sizeof(struct rtmsg), RTA_MULTIPATH); - if (rta_attr) { - /* The data of the attribute is an array of rtnexthop */ - struct rtnexthop *nh = RTA_DATA(rta_attr); - size_t len = RTA_PAYLOAD(rta_attr); - - /* validate the attribute array length */ - len = MIN(len, ((char *)resp + NLMSG_PAYLOAD(resp, 0) - (char *)rta_attr)); - - while (len >= sizeof(*nh) && len >= nh->rtnh_len) { - /* check accept_ra for the interface of each nexthop */ - - ifname = virNetDevGetName(nh->rtnh_ifindex); - - if (!ifname) - return -1; - - accept_ra = virNetDevIPGetAcceptRA(ifname); - - VIR_DEBUG("Checking multipath route nexthop device %s (%d), accept_ra: %d", - ifname, nh->rtnh_ifindex, accept_ra); - - if (accept_ra != 2 && virNetDevIPCheckIPv6ForwardingAddIF(data, &ifname) < 0) - return -1; - - VIR_FREE(ifname); - data->hasRARoutes = true; - - len -= NLMSG_ALIGN(nh->rtnh_len); - VIR_WARNINGS_NO_CAST_ALIGN - nh = RTNH_NEXT(nh); - VIR_WARNINGS_RESET - } - } - - return 0; -} - -bool -virNetDevIPCheckIPv6Forwarding(void) -{ - bool valid = false; - struct rtgenmsg genmsg; - size_t i; - struct virNetDevIPCheckIPv6ForwardingData data = { - .hasRARoutes = false, - .devices = NULL, - .ndevices = 0 - }; - g_autoptr(virNetlinkMsg) nlmsg = NULL; - - - /* Prepare the request message */ - if (!(nlmsg = nlmsg_alloc_simple(RTM_GETROUTE, - NLM_F_REQUEST | NLM_F_DUMP))) { - virReportOOMError(); - goto cleanup; - } - - memset(&genmsg, 0, sizeof(genmsg)); - genmsg.rtgen_family = AF_INET6; - - if (nlmsg_append(nlmsg, &genmsg, sizeof(genmsg), NLMSG_ALIGNTO) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("allocated netlink buffer is too small")); - goto cleanup; - } - - /* Send the request and loop over the responses */ - if (virNetlinkDumpCommand(nlmsg, virNetDevIPCheckIPv6ForwardingCallback, - 0, 0, NETLINK_ROUTE, 0, &data) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Failed to loop over IPv6 routes")); - goto cleanup; - } - - valid = !data.hasRARoutes || data.ndevices == 0; - - /* Check the global accept_ra if at least one isn't set on a - per-device basis */ - if (!valid && data.hasRARoutes) { - int accept_ra = virNetDevIPGetAcceptRA(NULL); - valid = accept_ra == 2; - VIR_DEBUG("Checked global accept_ra: %d", accept_ra); - } - - if (!valid) { - g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER; - for (i = 0; i < data.ndevices; i++) { - virBufferAdd(&buf, data.devices[i], -1); - if (i < data.ndevices - 1) - virBufferAddLit(&buf, ", "); - } - - virReportError(VIR_ERR_INTERNAL_ERROR, - _("Check the host setup: enabling IPv6 forwarding with " - "RA routes without accept_ra set to 2 is likely to cause " - "routes loss. Interfaces to look at: %s"), - virBufferCurrentContent(&buf)); - } - - cleanup: - virStringListFreeCount(data.devices, data.ndevices); - return valid; -} - #else /* defined(__linux__) && defined(WITH_LIBNL) */ @@ -688,15 +494,134 @@ virNetDevIPRouteAdd(const char *ifname, return 0; } +#endif /* defined(__linux__) && defined(HAVE_LIBNL) */ + + +#if defined(__linux__) + +static int +virNetDevIPGetAcceptRA(const char *ifname) +{ + g_autofree char *path = NULL; + g_autofree char *buf = NULL; + char *suffix; + int accept_ra = -1; + + path = g_strdup_printf("/proc/sys/net/ipv6/conf/%s/accept_ra", + ifname ? ifname : "all"); + + if ((virFileReadAll(path, 512, &buf) < 0) || + (virStrToLong_i(buf, &suffix, 10, &accept_ra) < 0)) + return -1; + + return accept_ra; +} + +/** + * virNetDevIPCheckIPv6Forwarding + * + * This function checks if IPv6 routes have the RTF_ADDRCONF flag set, + * indicating they have been created by the kernel's RA configuration + * handling. These routes are subject to being flushed when ipv6 + * forwarding is enabled unless accept_ra is explicitly set to "2". + * This will most likely result in ipv6 networking being broken. + * + * Returns: true if it is safe to enable forwarding, or false if + * breakable routes are found. + * + **/ +bool +virNetDevIPCheckIPv6Forwarding(void) +{ + int len; + char *cur; + g_autofree char *buf = NULL; + /* lines are 150 chars */ + enum {MAX_ROUTE_SIZE = 150*100000}; + + /* This is /proc/sys/net/ipv6/conf/all/accept_ra */ + int all_accept_ra = virNetDevIPGetAcceptRA(NULL); + + /* Read ipv6 routes */ + if ((len = virFileReadAll(PROC_NET_IPV6_ROUTE, + MAX_ROUTE_SIZE, &buf)) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Unable to read %s " + "for ipv6 forwarding checks"), PROC_NET_IPV6_ROUTE); + return false; + } + + /* VIR_DEBUG("%s output:\n%s", PROC_NET_IPV6_ROUTE, buf); */ + + /* Dropping the last character to stop the loop */ + if (len > 0) + buf[len-1] = '\0'; + + cur = buf; + while (cur) { + char route[33], flags[9], iface[9]; + unsigned int flags_val; + char *iface_val; + int num; + char *nl = strchr(cur, '\n'); + + if (nl) + *nl++ = '\0'; + + num = sscanf(cur, "%32s %*s %*s %*s %*s %*s %*s %*s %8s %8s", + route, flags, iface); + + cur = nl; + if (num != 3) { + VIR_DEBUG("Failed to parse route line: %s", cur); + continue; + } + + if (virStrToLong_ui(flags, NULL, 16, &flags_val)) { + VIR_DEBUG("Failed to parse flags: %s", flags); + continue; + } + + /* This is right justified, strip leading spaces */ + iface_val = &iface[0]; + while (*iface_val && g_ascii_isspace(*iface_val)) + iface_val++; + + VIR_DEBUG("%s iface %s flags %s : RTF_ADDRCONF %sset", + route, iface_val, flags, + (flags_val & RTF_ADDRCONF ? "" : "not ")); + + if (flags_val & RTF_ADDRCONF) { + int ret = virNetDevIPGetAcceptRA(iface_val); + VIR_DEBUG("%s reports accept_ra of %d", + iface_val, ret); + /* If the interface for this autoconfigured route + * has accept_ra == 1, or it is default and the "all" + * value of accept_ra == 1, it will be subject to + * flushing if forwarding is enabled. + */ + if (ret == 1 || (ret == 0 && all_accept_ra == 1)) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Check the host setup: interface %s has kernel " + "autoconfigured IPv6 routes and enabling forwarding " + " without accept_ra set to 2 will cause the kernel " + "to flush them, breaking networking."), iface_val); + return false; + } + } + } + return true; +} +#else bool virNetDevIPCheckIPv6Forwarding(void) { - VIR_WARN("built without libnl: unable to check if IPv6 forwarding can be safely enabled"); + VIR_DEBUG("No checks for IPv6 forwarding issues on non-Linux systems", flags); return true; } -#endif /* defined(__linux__) && defined(WITH_LIBNL) */ +#endif /* defined(__linux__) */ /** -- 2.26.2

3 4

[libvirt PATCH v3 0/3] Add support for vDPA network devices
by Jonathon Jongsma 14 Sep '20

14 Sep '20

vDPA network devices allow high-performance networking in a virtual machine by providing a wire-speed data path. These devices require a vendor-specific host driver but the data path follows the virtio specification. The support for vDPA devices was recently added to qemu. This allows libvirt to support these devices. This patchset requires that the device is configured on the host with the appropriate vendor-specific driver. This will create a chardev on the host at e.g. /dev/vhost-vdpa-0. That chardev path can then be used to define a new interface with type='vdpa'. Changes in v3: - rebased to latest master - various small fixes per comments on last review - investigated hotplug -- I have a preliminary libvirt patch, but it doesn't appear that hotplug is fully supported in qemu yet. - qemu never closes the fd when the device is removed, so the device cannot be reassigned to a different domain. - I decided not to post the preliminary hotplug patch until I can get more clarity from qemu developers. Jonathon Jongsma (3): conf: Add support for vDPA network devices qemu: add vhost-vdpa capability qemu: add vdpa support docs/formatdomain.rst | 24 ++++++++++++ docs/schemas/domaincommon.rng | 15 ++++++++ src/conf/domain_conf.c | 31 ++++++++++++++++ src/conf/domain_conf.h | 4 ++ src/conf/netdev_bandwidth_conf.c | 1 + src/libxl/libxl_conf.c | 1 + src/libxl/xen_common.c | 1 + src/lxc/lxc_controller.c | 1 + src/lxc/lxc_driver.c | 3 ++ src/lxc/lxc_process.c | 1 + src/qemu/qemu_capabilities.c | 4 ++ src/qemu/qemu_capabilities.h | 3 ++ src/qemu/qemu_command.c | 31 +++++++++++++++- src/qemu/qemu_command.h | 3 +- src/qemu/qemu_domain.c | 6 ++- src/qemu/qemu_hotplug.c | 15 +++++--- src/qemu/qemu_interface.c | 25 +++++++++++++ src/qemu/qemu_interface.h | 2 + src/qemu/qemu_migration.c | 10 ++++- src/qemu/qemu_process.c | 2 + src/qemu/qemu_validate.c | 15 ++++++++ src/vmx/vmx.c | 1 + .../caps_5.1.0.x86_64.xml | 1 + .../caps_5.2.0.x86_64.xml | 1 + .../net-vdpa.x86_64-latest.args | 37 +++++++++++++++++++ tests/qemuxml2argvdata/net-vdpa.xml | 28 ++++++++++++++ tests/qemuxml2argvmock.c | 11 +++++- tests/qemuxml2argvtest.c | 1 + tests/qemuxml2xmloutdata/net-vdpa.xml | 34 +++++++++++++++++ tests/qemuxml2xmltest.c | 1 + tools/virsh-domain.c | 1 + 31 files changed, 303 insertions(+), 11 deletions(-) create mode 100644 tests/qemuxml2argvdata/net-vdpa.x86_64-latest.args create mode 100644 tests/qemuxml2argvdata/net-vdpa.xml create mode 100644 tests/qemuxml2xmloutdata/net-vdpa.xml -- 2.26.2

2 5

[PATCH v2 0/7] qemu: implementation of transient disk option
by Masayoshi Mizuma 13 Sep '20

13 Sep '20

This patchset tries to implement transient option for qcow2 and raw format disk. This uses the snapshot cleanup codes: https://www.redhat.com/archives/libvir-list/2020-August/msg00299.html It gets user available to set <transient/> to the domain xml file like as: <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/var/lib/libvirt/images/guest.qcow2'/> <target dev='vda' bus='virtio'/> <transient/> </disk> Any changes which the Guest does to the disk is dropped when the Guest is shutdowned. There are some limitations for transient disk option so far: - Supported disk format is qcow2 and raw - blockdev capability is required for qemu - Following features are blocked with transient disk option - blockjobs - Migration - Disk hotplug Masayoshi Mizuma (7): qemuSnapshotDiskPrepareOne: Get available even if snapdisk is NULL qemu: Introduce functions to handle transient disk qemu: Add transient disk handler to start and stop the guest qemu: Transient option gets avaiable for qcow2 and raw format disk qemu: Block blockjobs when transient disk option is enabled qemu: Block migration when transient disk option is enabled qemu: Block disk hotplug when transient disk option is enabled src/qemu/qemu_domain.c | 7 ++ src/qemu/qemu_hotplug.c | 6 ++ src/qemu/qemu_migration.c | 22 ++++++ src/qemu/qemu_process.c | 8 +++ src/qemu/qemu_snapshot.c | 139 +++++++++++++++++++++++++++++++++++++- src/qemu/qemu_snapshot.h | 8 +++ src/qemu/qemu_validate.c | 9 ++- src/util/virstoragefile.h | 2 + 8 files changed, 196 insertions(+), 5 deletions(-) -- 2.27.0

3 16

[libvirt PATCH] esx: implement domainGetHostname
by Pino Toscano 13 Sep '20

13 Sep '20

Implement the .domainGetHostname hypervisor driver API to get the hostname of a running guest (needs VMware Tools). Signed-off-by: Pino Toscano <ptoscano(a)redhat.com> --- docs/drvesx.html.in | 3 +++ src/esx/esx_driver.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) diff --git a/docs/drvesx.html.in b/docs/drvesx.html.in index e25cf07e92..38de640c2a 100644 --- a/docs/drvesx.html.in +++ b/docs/drvesx.html.in @@ -796,6 +796,9 @@ Enter administrator password for example-vcenter.com: performed the ESX server raises an error and the driver reports it. </p> <ul> + <li> + <code>virDomainGetHostname</code> + </li> <li> <code>virDomainReboot</code> </li> diff --git a/src/esx/esx_driver.c b/src/esx/esx_driver.c index 9080478435..bddc588977 100644 --- a/src/esx/esx_driver.c +++ b/src/esx/esx_driver.c @@ -5060,6 +5060,59 @@ esxDomainHasManagedSaveImage(virDomainPtr domain, unsigned int flags) } +static char * +esxDomainGetHostname(virDomainPtr domain, + unsigned int flags) +{ + esxPrivate *priv = domain->conn->privateData; + esxVI_String *propertyNameList = NULL; + esxVI_ObjectContent *virtualMachine = NULL; + esxVI_VirtualMachinePowerState powerState; + char *hostname = NULL; + char *new_hostname = NULL; + + virCheckFlags(0, NULL); + + if (esxVI_EnsureSession(priv->primary) < 0) + return NULL; + + if (esxVI_String_AppendValueListToList(&propertyNameList, + "runtime.powerState\0" + "guest.hostName") < 0 || + esxVI_LookupVirtualMachineByUuid(priv->primary, domain->uuid, + propertyNameList, &virtualMachine, + esxVI_Occurrence_OptionalItem) || + esxVI_GetVirtualMachinePowerState(virtualMachine, &powerState) < 0) { + goto cleanup; + } + + if (powerState != esxVI_VirtualMachinePowerState_PoweredOn) { + virReportError(VIR_ERR_OPERATION_INVALID, "%s", + _("Domain is not powered on")); + goto cleanup; + } + + if (esxVI_GetStringValue(virtualMachine, "guest.hostName", + &hostname, esxVI_Occurrence_OptionalItem) < 0) { + goto cleanup; + } + + if (!hostname) { + virReportError(VIR_ERR_OPERATION_INVALID, "%s", + _("hostName field not available (missing VMware Tools?)")); + goto cleanup; + } + + new_hostname = g_strdup(hostname); + + cleanup: + esxVI_String_Free(&propertyNameList); + esxVI_ObjectContent_Free(&virtualMachine); + + return new_hostname; +} + + static virHypervisorDriver esxHypervisorDriver = { .name = "ESX", .connectOpen = esxConnectOpen, /* 0.7.0 */ @@ -5140,6 +5193,7 @@ static virHypervisorDriver esxHypervisorDriver = { .domainSnapshotDelete = esxDomainSnapshotDelete, /* 0.8.0 */ .connectIsAlive = esxConnectIsAlive, /* 0.9.8 */ .domainHasManagedSaveImage = esxDomainHasManagedSaveImage, /* 1.2.13 */ + .domainGetHostname = esxDomainGetHostname, /* 6.8.0 */ }; -- 2.26.2

3 2

[PATCH 0/3] numa: cleanups for 5.2
by Igor Mammedov 12 Sep '20

12 Sep '20

Remove deprecated default RAM splitting beween numa nodes that was deprecated since 4.1, and a couple of minor numa clean ups. Igor Mammedov (3): numa: drop support for '-numa node' (without memory specified) doc: Cleanup "'-mem-path' fallback to RAM" deprecation text numa: remove fixup numa_state->num_nodes to MAX_NODES include/hw/boards.h | 2 -- include/sysemu/numa.h | 4 --- docs/system/deprecated.rst | 44 +++++++++++++++------------- hw/core/machine.c | 1 - hw/core/numa.c | 59 -------------------------------------- hw/i386/pc_piix.c | 1 - hw/i386/pc_q35.c | 1 - hw/ppc/spapr.c | 1 - 8 files changed, 24 insertions(+), 89 deletions(-) -- 2.27.0

2 4

[PATCH] daemon: Fix a comment typo in libvirtd.conf.in
by Jim Fehlig 12 Sep '20

12 Sep '20

Signed-off-by: Jim Fehlig <jfehlig(a)suse.com> --- Pushing under the trivial rule. src/remote/libvirtd.conf.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/remote/libvirtd.conf.in b/src/remote/libvirtd.conf.in index ae6207bf54..ad049f636b 100644 --- a/src/remote/libvirtd.conf.in +++ b/src/remote/libvirtd.conf.in @@ -173,7 +173,7 @@ # # If libvirt was compiled with support for 'polkit', then # the systemd .socket files will use SocketMode=0666 which -# allows any user to connect and 'auth_iunix_rw' will default +# allows any user to connect and 'auth_unix_rw' will default # to 'polkit'. If you disable use of 'polkit' here, then it # is essential to change the systemd SocketMode parameter # back to 0600, to avoid an insecure configuration. -- 2.28.0

1 0

[libvirt PATCH 00/21] Remove VIR_{ALLOC, ALLOC_N, REALLOC_N}_QUIET macros.
by Tim Wiederhake 12 Sep '20

12 Sep '20

See also https://www.redhat.com/archives/libvir-list/2020-September/msg00540.html and https://www.redhat.com/archives/libvir-list/2020-September/msg00610.html Tim Wiederhake (21): tests: Use glib memory functions in virpcimock.c rpc: Use glib memory functions in virNetMessageSaveError util: Use glib memory functions in virBitmapNewQuiet util: Use glib memory functions in virErrorCopyNew util: Use glib memory functions in virLastErrorObject util: Use glib memory functions in virSaveLastError util: Use glib memory functions in virLogFilterNew util: Use glib memory functions in virThreadCreateFull util: Remove VIR_ALLOC_QUIET tests: Use glib memory function in testConfRoundTrip util: Use glib memory functions in virDevMapperGetTargetsImpl util: Use glib memory functions in virJSONValueGetArrayAsBitmap util: Remove VIR_ALLOC_N_QUIET qemu: Use glib memory functions in qemuDomainMasterKeyReadFile qemu: Use glib memory functions in qemuDomainLogContextRead qemu: Use glib memory functions in qemuProcessReadLog tests: Use glib memory functions in add_fd tests: Use glib memory functions in pci_driver_new tools: Use glib memory functions in vshCompleterFilter util: Use glib memory functions in virFileGetXAttrQuiet util: Remove VIR_REALLOC_N_QUIET src/qemu/qemu_domain.c | 4 ++-- src/qemu/qemu_process.c | 2 +- src/rpc/virnetmessage.c | 4 ++-- src/util/viralloc.h | 44 ----------------------------------------- src/util/virbitmap.c | 10 ++-------- src/util/virdevmapper.c | 4 +--- src/util/virerror.c | 30 ++++++++++++++-------------- src/util/virfile.c | 15 +++++--------- src/util/virjson.c | 4 ++-- src/util/virlog.c | 24 ++++++++-------------- src/util/virthread.c | 5 +---- tests/virconftest.c | 29 ++++++++++----------------- tests/virpcimock.c | 24 ++++++++-------------- tools/vsh.c | 10 ++++------ 14 files changed, 61 insertions(+), 148 deletions(-) -- 2.26.2

2 43

[PATCH] cphp: remove deprecated cpu-add command(s)
by Igor Mammedov 11 Sep '20

11 Sep '20

theses were deprecatedince since 4.0, remove both HMP and QMP variants. Users should use device_add commnad instead. To get list of possible CPUs and options, use 'info hotpluggable-cpus' HMP or query-hotpluggable-cpus QMP command. Signed-off-by: Igor Mammedov <imammedo(a)redhat.com> --- include/hw/boards.h | 1 - include/hw/i386/pc.h | 1 - include/monitor/hmp.h | 1 - docs/system/deprecated.rst | 25 +++++---- hmp-commands.hx | 15 ------ hw/core/machine-hmp-cmds.c | 12 ----- hw/core/machine-qmp-cmds.c | 12 ----- hw/i386/pc.c | 27 ---------- hw/i386/pc_piix.c | 1 - hw/s390x/s390-virtio-ccw.c | 12 ----- qapi/machine.json | 24 --------- tests/qtest/cpu-plug-test.c | 100 ++++-------------------------------- tests/qtest/test-hmp.c | 1 - 13 files changed, 21 insertions(+), 211 deletions(-) diff --git a/include/hw/boards.h b/include/hw/boards.h index bc5b82ad20..2163843bdb 100644 --- a/include/hw/boards.h +++ b/include/hw/boards.h @@ -173,7 +173,6 @@ struct MachineClass { void (*init)(MachineState *state); void (*reset)(MachineState *state); void (*wakeup)(MachineState *state); - void (*hot_add_cpu)(MachineState *state, const int64_t id, Error **errp); int (*kvm_type)(MachineState *machine, const char *arg); void (*smp_parse)(MachineState *ms, QemuOpts *opts); diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h index fe52e165b2..ca8ff6cd27 100644 --- a/include/hw/i386/pc.h +++ b/include/hw/i386/pc.h @@ -137,7 +137,6 @@ extern int fd_bootchk; void pc_acpi_smi_interrupt(void *opaque, int irq, int level); -void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp); void pc_smp_parse(MachineState *ms, QemuOpts *opts); void pc_guest_info_init(PCMachineState *pcms); diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h index c986cfd28b..642e9e91f9 100644 --- a/include/monitor/hmp.h +++ b/include/monitor/hmp.h @@ -89,7 +89,6 @@ void hmp_chardev_add(Monitor *mon, const QDict *qdict); void hmp_chardev_change(Monitor *mon, const QDict *qdict); void hmp_chardev_remove(Monitor *mon, const QDict *qdict); void hmp_chardev_send_break(Monitor *mon, const QDict *qdict); -void hmp_cpu_add(Monitor *mon, const QDict *qdict); void hmp_object_add(Monitor *mon, const QDict *qdict); void hmp_object_del(Monitor *mon, const QDict *qdict); void hmp_info_memdev(Monitor *mon, const QDict *qdict); diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index 851dbdeb8a..122717cfee 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -284,13 +284,6 @@ The ``query-cpus`` command is replaced by the ``query-cpus-fast`` command. The ``arch`` output member of the ``query-cpus-fast`` command is replaced by the ``target`` output member. -``cpu-add`` (since 4.0) -''''''''''''''''''''''' - -Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See -documentation of ``query-hotpluggable-cpus`` for additional -details. - ``query-events`` (since 4.0) '''''''''''''''''''''''''''' @@ -306,12 +299,6 @@ the 'wait' field, which is only applicable to sockets in server mode Human Monitor Protocol (HMP) commands ------------------------------------- -``cpu-add`` (since 4.0) -''''''''''''''''''''''' - -Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See -documentation of ``query-hotpluggable-cpus`` for additional details. - ``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0) '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' @@ -514,6 +501,12 @@ QEMU Machine Protocol (QMP) commands The "autoload" parameter has been ignored since 2.12.0. All bitmaps are automatically loaded from qcow2 images. +``cpu-add`` (removed in 5.2) +'''''''''''''''''''''''''''' + +Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See +documentation of ``query-hotpluggable-cpus`` for additional details. + Human Monitor Protocol (HMP) commands ------------------------------------- @@ -523,6 +516,12 @@ The ``hub_id`` parameter of ``hostfwd_add`` / ``hostfwd_remove`` (removed in 5.0 The ``[hub_id name]`` parameter tuple of the 'hostfwd_add' and 'hostfwd_remove' HMP commands has been replaced by ``netdev_id``. +``cpu-add`` (removed in 5.2) +'''''''''''''''''''''''''''' + +Use ``device_add`` for hotplugging vCPUs instead of ``cpu-add``. See +documentation of ``query-hotpluggable-cpus`` for additional details. + Guest Emulator ISAs ------------------- diff --git a/hmp-commands.hx b/hmp-commands.hx index 60f395c276..d1e3e0e1c6 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -1761,21 +1761,6 @@ SRST Executes a qemu-io command on the given block device. ERST - { - .name = "cpu-add", - .args_type = "id:i", - .params = "id", - .help = "add cpu (deprecated, use device_add instead)", - .cmd = hmp_cpu_add, - }, - -SRST -``cpu-add`` *id* - Add CPU with id *id*. This command is deprecated, please - +use ``device_add`` instead. For details, refer to - 'docs/cpu-hotplug.rst'. -ERST - { .name = "qom-list", .args_type = "path:s?", diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index 39999c47c5..f4092b98cc 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -46,18 +46,6 @@ void hmp_info_cpus(Monitor *mon, const QDict *qdict) qapi_free_CpuInfoFastList(cpu_list); } -void hmp_cpu_add(Monitor *mon, const QDict *qdict) -{ - int cpuid; - Error *err = NULL; - - error_report("cpu_add is deprecated, please use device_add instead"); - - cpuid = qdict_get_int(qdict, "id"); - qmp_cpu_add(cpuid, &err); - hmp_handle_error(mon, err); -} - void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict) { Error *err = NULL; diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c index 21551221ad..5362c80a18 100644 --- a/hw/core/machine-qmp-cmds.c +++ b/hw/core/machine-qmp-cmds.c @@ -284,18 +284,6 @@ HotpluggableCPUList *qmp_query_hotpluggable_cpus(Error **errp) return machine_query_hotpluggable_cpus(ms); } -void qmp_cpu_add(int64_t id, Error **errp) -{ - MachineClass *mc; - - mc = MACHINE_GET_CLASS(current_machine); - if (mc->hot_add_cpu) { - mc->hot_add_cpu(current_machine, id, errp); - } else { - error_setg(errp, "Not supported"); - } -} - void qmp_set_numa_node(NumaOptions *cmd, Error **errp) { if (!runstate_check(RUN_STATE_PRECONFIG)) { diff --git a/hw/i386/pc.c b/hw/i386/pc.c index d11daacc23..d071da787b 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -777,32 +777,6 @@ void pc_smp_parse(MachineState *ms, QemuOpts *opts) } } -void pc_hot_add_cpu(MachineState *ms, const int64_t id, Error **errp) -{ - X86MachineState *x86ms = X86_MACHINE(ms); - int64_t apic_id = x86_cpu_apic_id_from_index(x86ms, id); - Error *local_err = NULL; - - if (id < 0) { - error_setg(errp, "Invalid CPU id: %" PRIi64, id); - return; - } - - if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) { - error_setg(errp, "Unable to add CPU: %" PRIi64 - ", resulting APIC ID (%" PRIi64 ") is too large", - id, apic_id); - return; - } - - - x86_cpu_new(X86_MACHINE(ms), apic_id, &local_err); - if (local_err) { - error_propagate(errp, local_err); - return; - } -} - static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count) { if (cpus_count > 0xff) { @@ -1966,7 +1940,6 @@ static void pc_machine_class_init(ObjectClass *oc, void *data) mc->auto_enable_numa_with_memdev = true; mc->has_hotpluggable_cpus = true; mc->default_boot_order = "cad"; - mc->hot_add_cpu = pc_hot_add_cpu; mc->smp_parse = pc_smp_parse; mc->block_default_type = IF_IDE; mc->max_cpus = 255; diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c index 32b1453e6a..a5d1a0693d 100644 --- a/hw/i386/pc_piix.c +++ b/hw/i386/pc_piix.c @@ -752,7 +752,6 @@ static void pc_i440fx_1_4_machine_options(MachineClass *m) { pc_i440fx_1_5_machine_options(m); m->hw_version = "1.4.0"; - m->hot_add_cpu = NULL; compat_props_add(m->compat_props, pc_compat_1_4, pc_compat_1_4_len); } diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c index 3106bbea33..28266a3a35 100644 --- a/hw/s390x/s390-virtio-ccw.c +++ b/hw/s390x/s390-virtio-ccw.c @@ -553,17 +553,6 @@ static HotplugHandler *s390_get_hotplug_handler(MachineState *machine, return NULL; } -static void s390_hot_add_cpu(MachineState *machine, - const int64_t id, Error **errp) -{ - ObjectClass *oc; - - g_assert(machine->possible_cpus->cpus[0].cpu); - oc = OBJECT_CLASS(CPU_GET_CLASS(machine->possible_cpus->cpus[0].cpu)); - - s390x_new_cpu(object_class_get_name(oc), id, errp); -} - static void s390_nmi(NMIState *n, int cpu_index, Error **errp) { CPUState *cs = qemu_get_cpu(cpu_index); @@ -604,7 +593,6 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data) s390mc->hpage_1m_allowed = true; mc->init = ccw_init; mc->reset = s390_machine_reset; - mc->hot_add_cpu = s390_hot_add_cpu; mc->block_default_type = IF_VIRTIO; mc->no_cdrom = 1; mc->no_floppy = 1; diff --git a/qapi/machine.json b/qapi/machine.json index 0ac1880e4a..d8ed096e9a 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -307,30 +307,6 @@ ## { 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] } -## -# @cpu-add: -# -# Adds CPU with specified ID. -# -# @id: ID of CPU to be created, valid values [0..max_cpus) -# -# Features: -# @deprecated: This command is deprecated. Use `device_add` instead. -# See the `query-hotpluggable-cpus` command for details. -# -# Returns: Nothing on success -# -# Since: 1.5 -# -# Example: -# -# -> { "execute": "cpu-add", "arguments": { "id": 2 } } -# <- { "return": {} } -# -## -{ 'command': 'cpu-add', 'data': {'id': 'int'}, - 'features': [ 'deprecated' ] } - ## # @MachineInfo: # diff --git a/tests/qtest/cpu-plug-test.c b/tests/qtest/cpu-plug-test.c index e8ffbbce4b..a1c689414b 100644 --- a/tests/qtest/cpu-plug-test.c +++ b/tests/qtest/cpu-plug-test.c @@ -25,54 +25,6 @@ struct PlugTestData { }; typedef struct PlugTestData PlugTestData; -static void test_plug_with_cpu_add(gconstpointer data) -{ - const PlugTestData *s = data; - char *args; - QDict *response; - unsigned int i; - - args = g_strdup_printf("-machine %s -cpu %s " - "-smp 1,sockets=%u,cores=%u,threads=%u,maxcpus=%u", - s->machine, s->cpu_model, - s->sockets, s->cores, s->threads, s->maxcpus); - qtest_start(args); - - for (i = 1; i < s->maxcpus; i++) { - response = qmp("{ 'execute': 'cpu-add'," - " 'arguments': { 'id': %d } }", i); - g_assert(response); - g_assert(!qdict_haskey(response, "error")); - qobject_unref(response); - } - - qtest_end(); - g_free(args); -} - -static void test_plug_without_cpu_add(gconstpointer data) -{ - const PlugTestData *s = data; - char *args; - QDict *response; - - args = g_strdup_printf("-machine %s -cpu %s " - "-smp 1,sockets=%u,cores=%u,threads=%u,maxcpus=%u", - s->machine, s->cpu_model, - s->sockets, s->cores, s->threads, s->maxcpus); - qtest_start(args); - - response = qmp("{ 'execute': 'cpu-add'," - " 'arguments': { 'id': %d } }", - s->sockets * s->cores * s->threads); - g_assert(response); - g_assert(qdict_haskey(response, "error")); - qobject_unref(response); - - qtest_end(); - g_free(args); -} - static void test_plug_with_device_add(gconstpointer data) { const PlugTestData *td = data; @@ -144,36 +96,13 @@ static void add_pc_test_case(const char *mname) data->cores = 3; data->threads = 2; data->maxcpus = data->sockets * data->cores * data->threads; - if (g_str_has_suffix(mname, "-1.4") || - (strcmp(mname, "pc-1.3") == 0) || - (strcmp(mname, "pc-1.2") == 0) || - (strcmp(mname, "pc-1.1") == 0) || - (strcmp(mname, "pc-1.0") == 0)) { - path = g_strdup_printf("cpu-plug/%s/init/%ux%ux%u&maxcpus=%u", - mname, data->sockets, data->cores, - data->threads, data->maxcpus); - qtest_add_data_func_full(path, data, test_plug_without_cpu_add, - test_data_free); - g_free(path); - } else { - PlugTestData *data2 = g_memdup(data, sizeof(PlugTestData)); - - data2->machine = g_strdup(data->machine); - data2->device_model = g_strdup(data->device_model); - path = g_strdup_printf("cpu-plug/%s/cpu-add/%ux%ux%u&maxcpus=%u", - mname, data->sockets, data->cores, - data->threads, data->maxcpus); - qtest_add_data_func_full(path, data, test_plug_with_cpu_add, - test_data_free); - g_free(path); - path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", - mname, data2->sockets, data2->cores, - data2->threads, data2->maxcpus); - qtest_add_data_func_full(path, data2, test_plug_with_device_add, - test_data_free); - g_free(path); - } + path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", + mname, data->sockets, data->cores, + data->threads, data->maxcpus); + qtest_add_data_func_full(path, data, test_plug_with_device_add, + test_data_free); + g_free(path); } static void add_pseries_test_case(const char *mname) @@ -205,7 +134,7 @@ static void add_pseries_test_case(const char *mname) static void add_s390x_test_case(const char *mname) { char *path; - PlugTestData *data, *data2; + PlugTestData *data; if (!g_str_has_prefix(mname, "s390-ccw-virtio-")) { return; @@ -220,21 +149,10 @@ static void add_s390x_test_case(const char *mname) data->threads = 1; data->maxcpus = data->sockets * data->cores * data->threads; - data2 = g_memdup(data, sizeof(PlugTestData)); - data2->machine = g_strdup(data->machine); - data2->device_model = g_strdup(data->device_model); - - path = g_strdup_printf("cpu-plug/%s/cpu-add/%ux%ux%u&maxcpus=%u", + path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", mname, data->sockets, data->cores, data->threads, data->maxcpus); - qtest_add_data_func_full(path, data, test_plug_with_cpu_add, - test_data_free); - g_free(path); - - path = g_strdup_printf("cpu-plug/%s/device-add/%ux%ux%u&maxcpus=%u", - mname, data2->sockets, data2->cores, - data2->threads, data2->maxcpus); - qtest_add_data_func_full(path, data2, test_plug_with_device_add, + qtest_add_data_func_full(path, data, test_plug_with_device_add, test_data_free); g_free(path); } diff --git a/tests/qtest/test-hmp.c b/tests/qtest/test-hmp.c index aea1384bac..94a8023173 100644 --- a/tests/qtest/test-hmp.c +++ b/tests/qtest/test-hmp.c @@ -27,7 +27,6 @@ static const char *hmp_cmds[] = { "chardev-change testchardev1 ringbuf", "chardev-remove testchardev1", "commit all", - "cpu-add 1", "cpu 0", "device_add ?", "device_add usb-mouse,id=mouse1", -- 2.27.0

3 2

[libvirt PATCH v3 0/8] Replace VIR_{ALLOC, ALLOC_N, FREE} in src/cpu/*.
by Tim Wiederhake 11 Sep '20

11 Sep '20

V1: https://www.redhat.com/archives/libvir-list/2020-September/msg00540.html V2: https://www.redhat.com/archives/libvir-list/2020-September/msg00610.html Tim Wiederhake (8): cpu_ppc64: Use g_auto* in ppc64MakeCPUData cpu_map: Use g_auto* in loadData cpu_map: Use g_auto* in loadIncludes cpu_x86: Use g_auto* in virX86CpuIncompatible cpu_map: Remove unnecessary variable in loadData cpu: Replace VIR_ALLOC with g_new0 cpu: Replace VIR_ALLOC_N with g_new0 cpu: Replace VIR_FREE with g_free src/cpu/cpu.c | 6 ++--- src/cpu/cpu_map.c | 18 ++++++-------- src/cpu/cpu_ppc64.c | 59 ++++++++++++++++----------------------------- src/cpu/cpu_x86.c | 11 ++++----- 4 files changed, 35 insertions(+), 59 deletions(-) -- 2.26.2

2 9

[libvirt PATCH v2 0/8] Replace VIR_{ALLOC, ALLOC_N, FREE} in src/cpu/*.
by Tim Wiederhake 11 Sep '20

11 Sep '20

V1: https://www.redhat.com/archives/libvir-list/2020-September/msg00540.html Tim Wiederhake (8): cpu_ppc64: Use g_auto* in ppc64MakeCPUData cpu_map: Use g_auto* in loadData cpu_map: Use g_auto* in loadIncludes cpu_x86: Use g_auto* in virX86CpuIncompatible cpu_map: Remove unnecessary variable in loadData cpu: Replace VIR_ALLOC with g_new0 cpu: Replace VIR_ALLOC_N with g_new0 cpu: Replace VIR_FREE with g_free src/cpu/cpu.c | 6 ++--- src/cpu/cpu_map.c | 20 ++++++--------- src/cpu/cpu_ppc64.c | 59 ++++++++++++++++----------------------------- src/cpu/cpu_x86.c | 11 ++++----- 4 files changed, 36 insertions(+), 60 deletions(-) -- 2.26.2

2 15

[libvirt PATCH] qemu: qemuDomainPMSuspendAgent: Don't assign to 'ret' in a conditional
by Erik Skultety 11 Sep '20

11 Sep '20

When the guest agent isn't running, we still report success on a PM suspend action even though we logged an error correctly, this is because we poisoned the 'ret' value a few lines above. Fixes: a663a860819287e041c3de672aad1d8543098ecc Signed-off-by: Erik Skultety <eskultet(a)redhat.com> --- Pushed as trivial. src/qemu/qemu_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 2e46931c71..fcdee31971 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -16770,7 +16770,7 @@ qemuDomainPMSuspendAgent(virQEMUDriverPtr driver, if (qemuDomainObjBeginAgentJob(driver, vm, QEMU_AGENT_JOB_MODIFY) < 0) return -1; - if ((ret = virDomainObjCheckActive(vm)) < 0) + if (virDomainObjCheckActive(vm) < 0) goto endjob; if (!qemuDomainAgentAvailable(vm, true)) -- 2.26.2

1 0