- Devel - libvirt List Archives

[libvirt] [PATCH] maint: fix comment typos
by Eric Blake 28 Jul '10

28 Jul '10

* src/network/bridge_driver.c (networkAddMasqueradingIptablesRules): Fix spelling and grammar. --- Pushing under the trivial change rule. src/network/bridge_driver.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index 80ed57a..d6c7ae1 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -643,12 +643,12 @@ networkAddMasqueradingIptablesRules(struct network_driver *driver, * * We need to end up with 3 rules in the table in this order * - * 1. protocol=tcp with sport mapping restricton - * 2. protocol=udp with sport mapping restricton + * 1. protocol=tcp with sport mapping restriction + * 2. protocol=udp with sport mapping restriction * 3. generic any protocol * * The sport mappings are required, because default IPtables - * MASQUERADE is maintain port number unchanged where possible. + * MASQUERADE maintain port numbers unchanged where possible. * * NFS can be configured to only "trust" port numbers < 1023. * -- 1.7.2

1 0

[libvirt] Pushed trivial patch
by Chris Lalancette 28 Jul '10

28 Jul '10

Hello, I've pushed the attached patch under the trivial rules. Thanks, -- Chris Lalancette

1 0

[libvirt] [PATCH] Introduce a -libvirt-caps flag as a stop-gap
by Anthony Liguori 28 Jul '10

28 Jul '10

Today libvirt parses -help output to attempt to enumerate capabilities. This is very broken and has led to multiple failures. Since libvirt is an important management interface to QEMU, we need to do a better job giving them the ability to detect what a QEMU executable supports. Right now, we keep fixing up help output to appease it's parsing code but this is undesirable. The Right Solution is to introduce a robust capabilities advertisement that enumerates every feature we have. As with most Right Solutions, we don't have mergable code today and it's unclear that we'll get there by the next release. This patch introduces an incremental solution of just spitting out the handful of capabilities libvirt is probing for today. This interface will need to remain forever but can stop being updated once we have a Right Solution. Signed-off-by: Anthony Liguori <aliguori(a)us.ibm.com> diff --git a/qemu-options.hx b/qemu-options.hx index 40cee70..a618914 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -2235,7 +2235,26 @@ Normally QEMU loads a configuration file from @var{sysconfdir}/qemu.conf and option will prevent QEMU from loading these configuration files at startup. ETEXI +DEF("libvirt-caps", 0, QEMU_OPTION_libvirt_caps, + "-libvirt-caps output libvirt-specific capabilities\n", + QEMU_ARCH_ALL) +STEXI +@item -libvirt-caps +@findex -libvirt-caps +Output a common separate list of capabilities that this version of QEMU +supports and exit. This interface specifically exists for libvirt's use as an +intermediate solution until we support a full capabilities system. One this +capabilities system exist, this option's output should never change. + +The format out this command is: + +version: VERSION +package: PACKAGE +caps: CAP1[,CAP2...] +ETEXI + HXCOMM This is the last statement. Insert new options before this line! STEXI @end table ETEXI + diff --git a/vl.c b/vl.c index ba6ee11..8fe354d 100644 --- a/vl.c +++ b/vl.c @@ -2616,6 +2616,14 @@ int main(int argc, char **argv, char **envp) fclose(fp); break; } + case QEMU_OPTION_libvirt_caps: + printf("version: " QEMU_VERSION "\n" + "package: " QEMU_PKGVERSION "\n" + "caps: name,enable-kvm,no-reboot,uuid,xen-domid,drive" + ",cache-v2,format,vga,serial,mem-path,chardev,balloon" + ",device,rtc,netdev,sdl,topology\n"); + exit(0); + break; default: os_parse_cmd_args(popt->index, optarg); } -- 1.7.0.4

7 10

[libvirt] [PATCH 0/3] libvirt-guests: fix init script to Fedora standards
by Eric Blake 28 Jul '10

28 Jul '10

https://bugzilla.redhat.com/show_bug.cgi?id=617300 documents several shortcoming in our libvirt-guests init script, in relation to Fedora init script standards. For easier review, I've split it into three simpler patches. Eric Blake (3): libvirt-guests: detect invalid arguments libvirt-guests: enhance status libvirt-guests: add reload, condrestart daemon/libvirt-guests.init.in | 46 +++++++++++++++++++++++++++++++++------- 1 files changed, 38 insertions(+), 8 deletions(-) -- 1.7.2

3 6

[libvirt] [PATCH] qemu: Allow setting boot menu on/off
by Cole Robinson 27 Jul '10

27 Jul '10

Add a new element to the <os> block: <bootmenu enable="yes|no"/> Which maps to -boot,menu=on|off on the QEMU command line. I decided to use an explicit 'enable' attribute rather than just make the bootmenu element boolean. This allows us to treat lack of a bootmenu element as 'use hypervisor default'. Signed-off-by: Cole Robinson <crobinso(a)redhat.com> --- docs/formatdomain.html.in | 8 +++++ docs/schemas/domain.rng | 10 ++++++ src/conf/domain_conf.c | 18 ++++++++++++ src/conf/domain_conf.h | 8 ++++- src/qemu/qemu_conf.c | 27 ++++++++++++++++- src/qemu/qemu_conf.h | 1 + tests/qemuhelptest.c | 9 ++++-- .../qemuxml2argv-boot-menu-disable.args | 1 + .../qemuxml2argv-boot-menu-disable.xml | 27 ++++++++++++++++++ .../qemuxml2argvdata/qemuxml2argv-boot-multi.args | 1 + tests/qemuxml2argvdata/qemuxml2argv-boot-multi.xml | 30 ++++++++++++++++++++ tests/qemuxml2argvtest.c | 2 + tests/qemuxml2xmltest.c | 2 + 13 files changed, 138 insertions(+), 6 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-boot-multi.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-boot-multi.xml diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 3e80312..c79b606 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -79,6 +79,8 @@ <type>hvm</type> <loader>/usr/lib/xen/boot/hvmloader</loader> <boot dev='hd'/> + <boot dev='cdrom'/> + <bootmenu enable='yes'/> </os> ...</pre> @@ -104,6 +106,12 @@ times to setup a priority list of boot devices to try in turn. Since 0.1.3 </dd> + <dt><code>bootmenu</code></dt> + <dd> Whether or not to enable an interactive boot menu prompt on guest + startup. The <code>enable</code> attribute can be either "yes" or "no". + If not specified, the hypervisor default is used. + Since 0.8.3 + </dd> </dl> <h4><a name="elementsOSBootloader">Host bootloader</a></h4> diff --git a/docs/schemas/domain.rng b/docs/schemas/domain.rng index 2d22ce4..f36bb1f 100644 --- a/docs/schemas/domain.rng +++ b/docs/schemas/domain.rng @@ -122,6 +122,16 @@ <ref name="osbootdev"/> </oneOrMore> </choice> + <optional> + <element name="bootmenu"> + <attribute name="enable"> + <choice> + <value>yes</value> + <value>no</value> + </choice> + </attribute> + </element> + </optional> </interleave> </element> </define> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 5b59c01..dc775e8 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -4300,6 +4300,8 @@ static virDomainDefPtr virDomainDefParseXML(virCapsPtr caps, } if (STREQ(def->os.type, "hvm")) { + char *bootstr; + /* analysis of the boot devices */ if ((n = virXPathNodeSet("./os/boot", ctxt, &nodes)) < 0) { virDomainReportError(VIR_ERR_INTERNAL_ERROR, @@ -4329,6 +4331,15 @@ static virDomainDefPtr virDomainDefParseXML(virCapsPtr caps, def->os.bootDevs[0] = VIR_DOMAIN_BOOT_DISK; } VIR_FREE(nodes); + + bootstr = virXPathString("string(./os/bootmenu[1]/@enable)", ctxt); + if (bootstr) { + if (STREQ(bootstr, "yes")) + def->os.bootmenu = VIR_DOMAIN_BOOT_MENU_ENABLED; + else + def->os.bootmenu = VIR_DOMAIN_BOOT_MENU_DISABLED; + VIR_FREE(bootstr); + } } def->emulator = virXPathString("string(./devices/emulator[1])", ctxt); @@ -6275,6 +6286,13 @@ char *virDomainDefFormat(virDomainDefPtr def, } virBufferVSprintf(&buf, " <boot dev='%s'/>\n", boottype); } + + if (def->os.bootmenu != VIR_DOMAIN_BOOT_MENU_DEFAULT) { + const char *enabled = (def->os.bootmenu == + VIR_DOMAIN_BOOT_MENU_ENABLED ? "yes" + : "no"); + virBufferVSprintf(&buf, " <bootmenu enable='%s'/>\n", enabled); + } } virBufferAddLit(&buf, " </os>\n"); diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 9ef687b..afd172f 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -615,7 +615,6 @@ struct _virDomainDeviceDef { # define VIR_DOMAIN_MAX_BOOT_DEVS 4 -/* 3 possible boot devices */ enum virDomainBootOrder { VIR_DOMAIN_BOOT_FLOPPY, VIR_DOMAIN_BOOT_CDROM, @@ -625,6 +624,12 @@ enum virDomainBootOrder { VIR_DOMAIN_BOOT_LAST, }; +enum virDomainBootMenu { + VIR_DOMAIN_BOOT_MENU_DEFAULT = 0, + VIR_DOMAIN_BOOT_MENU_ENABLED, + VIR_DOMAIN_BOOT_MENU_DISABLED, +}; + enum virDomainFeature { VIR_DOMAIN_FEATURE_ACPI, VIR_DOMAIN_FEATURE_APIC, @@ -651,6 +656,7 @@ struct _virDomainOSDef { char *machine; int nBootDevs; int bootDevs[VIR_DOMAIN_BOOT_LAST]; + int bootmenu; char *init; char *kernel; char *initrd; diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 05ad67d..1db504d 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -1205,6 +1205,8 @@ static unsigned long long qemudComputeCmdFlags(const char *help, flags |= QEMUD_CMD_FLAG_NO_KVM_PIT; if (strstr(help, "-tdf")) flags |= QEMUD_CMD_FLAG_TDF; + if (strstr(help, ",menu=on")) + flags |= QEMUD_CMD_FLAG_BOOT_MENU; /* Keep disabled till we're actually ready to turn on netdev mode * The plan is todo it in 0.13.0 QEMU, but lets wait & see... */ @@ -4078,9 +4080,25 @@ int qemudBuildCommandLine(virConnectPtr conn, } } if (def->os.nBootDevs) { + virBuffer boot_buf = VIR_BUFFER_INITIALIZER; + boot[def->os.nBootDevs] = '\0'; - ADD_ARG_LIT("-boot"); - ADD_ARG_LIT(boot); + virBufferVSprintf(&boot_buf, "-boot %s", boot); + + if (qemuCmdFlags & QEMUD_CMD_FLAG_BOOT_MENU && + def->os.bootmenu != VIR_DOMAIN_BOOT_MENU_DEFAULT) { + if (def->os.bootmenu == VIR_DOMAIN_BOOT_MENU_ENABLED) + virBufferAddLit(&boot_buf, ",menu=on"); + else if (def->os.bootmenu == VIR_DOMAIN_BOOT_MENU_DISABLED) + virBufferAddLit(&boot_buf, ",menu=off"); + } + + if (virBufferError(&boot_buf)) { + virReportOOMError(); + goto error; + } + + ADD_ARG_LIT(virBufferContentAndReset(&boot_buf)); } if (def->os.kernel) { @@ -6207,8 +6225,13 @@ virDomainDefPtr qemuParseCommandLine(virCapsPtr caps, def->os.bootDevs[b++] = VIR_DOMAIN_BOOT_CDROM; else if (val[n] == 'n') def->os.bootDevs[b++] = VIR_DOMAIN_BOOT_NET; + else if (val[n] == ',') + break; } def->os.nBootDevs = b; + + if (strstr(val, "menu=on")) + def->os.bootmenu = 1; } else if (STREQ(arg, "-name")) { WANT_VALUE(); if (!(def->name = strdup(val))) diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h index 8c17e26..1aa9d2e 100644 --- a/src/qemu/qemu_conf.h +++ b/src/qemu/qemu_conf.h @@ -91,6 +91,7 @@ enum qemud_cmd_flags { QEMUD_CMD_FLAG_TDF = (1LL << 35), /* -tdf flag (user-mode pit catchup) */ QEMUD_CMD_FLAG_PCI_CONFIGFD = (1LL << 36), /* pci-assign.configfd */ QEMUD_CMD_FLAG_NODEFCONFIG = (1LL << 37), /* -nodefconfig */ + QEMUD_CMD_FLAG_BOOT_MENU = (1LL << 38), /* -boot menu=on support */ }; /* Main driver state */ diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c index 517a8fe..56a49fd 100644 --- a/tests/qemuhelptest.c +++ b/tests/qemuhelptest.c @@ -220,7 +220,8 @@ mymain(int argc, char **argv) QEMUD_CMD_FLAG_RTC_TD_HACK | QEMUD_CMD_FLAG_NO_HPET | QEMUD_CMD_FLAG_NO_KVM_PIT | - QEMUD_CMD_FLAG_TDF, + QEMUD_CMD_FLAG_TDF | + QEMUD_CMD_FLAG_BOOT_MENU, 10092, 1, 0); DO_TEST("qemu-0.12.1", QEMUD_CMD_FLAG_VNC_COLON | @@ -244,7 +245,8 @@ mymain(int argc, char **argv) QEMUD_CMD_FLAG_DEVICE | QEMUD_CMD_FLAG_SMP_TOPOLOGY | QEMUD_CMD_FLAG_RTC | - QEMUD_CMD_FLAG_NO_HPET, + QEMUD_CMD_FLAG_NO_HPET | + QEMUD_CMD_FLAG_BOOT_MENU, 12001, 0, 0); DO_TEST("qemu-kvm-0.12.3", QEMUD_CMD_FLAG_VNC_COLON | @@ -274,7 +276,8 @@ mymain(int argc, char **argv) QEMUD_CMD_FLAG_VNET_HOST | QEMUD_CMD_FLAG_NO_HPET | QEMUD_CMD_FLAG_NO_KVM_PIT | - QEMUD_CMD_FLAG_TDF, + QEMUD_CMD_FLAG_TDF | + QEMUD_CMD_FLAG_BOOT_MENU, 12003, 1, 0); return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE; diff --git a/tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.args b/tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.args new file mode 100644 index 0000000..1c773fd --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.args @@ -0,0 +1 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot d,menu=off -cdrom /dev/cdrom -net none -serial none -parallel none -usb diff --git a/tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.xml b/tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.xml new file mode 100644 index 0000000..ceb109c --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-boot-menu-disable.xml @@ -0,0 +1,27 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory>219200</memory> + <currentMemory>219200</currentMemory> + <vcpu>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='cdrom'/> + <bootmenu enable='no'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='cdrom'> + <source dev='/dev/cdrom'/> + <target dev='hdc' bus='ide'/> + <readonly/> + <address type='drive' controller='0' bus='1' unit='0'/> + </disk> + <controller type='ide' index='0'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-boot-multi.args b/tests/qemuxml2argvdata/qemuxml2argv-boot-multi.args new file mode 100644 index 0000000..85b74d1 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-boot-multi.args @@ -0,0 +1 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot dcna,menu=on -cdrom /dev/cdrom -net none -serial none -parallel none -usb diff --git a/tests/qemuxml2argvdata/qemuxml2argv-boot-multi.xml b/tests/qemuxml2argvdata/qemuxml2argv-boot-multi.xml new file mode 100644 index 0000000..48f27aa --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-boot-multi.xml @@ -0,0 +1,30 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory>219200</memory> + <currentMemory>219200</currentMemory> + <vcpu>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='cdrom'/> + <boot dev='hd'/> + <boot dev='network'/> + <boot dev='fd'/> + <bootmenu enable='yes'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='cdrom'> + <source dev='/dev/cdrom'/> + <target dev='hdc' bus='ide'/> + <readonly/> + <address type='drive' controller='0' bus='1' unit='0'/> + </disk> + <controller type='ide' index='0'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 3d6c583..0ca9804 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -223,6 +223,8 @@ mymain(int argc, char **argv) DO_TEST("boot-cdrom", 0); DO_TEST("boot-network", 0); DO_TEST("boot-floppy", 0); + DO_TEST("boot-multi", QEMUD_CMD_FLAG_BOOT_MENU); + DO_TEST("boot-menu-disable", QEMUD_CMD_FLAG_BOOT_MENU); DO_TEST("bootloader", QEMUD_CMD_FLAG_DOMID); DO_TEST("clock-utc", 0); DO_TEST("clock-localtime", 0); diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index 69829b1..00b3a1b 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -89,6 +89,8 @@ mymain(int argc, char **argv) DO_TEST("boot-cdrom"); DO_TEST("boot-network"); DO_TEST("boot-floppy"); + DO_TEST("boot-multi"); + DO_TEST("boot-menu-disable"); DO_TEST("bootloader"); DO_TEST("clock-utc"); DO_TEST("clock-localtime"); -- 1.7.1.1

3 4

[libvirt] [PATCH] docs: Link wiki FAQ to main page
by Cole Robinson 27 Jul '10

27 Jul '10

Since DV recommended keeping the build instructions distributed with the source, move them from the old FAQ to the downloads page. Signed-off-by: Cole Robinson <crobinso(a)redhat.com> --- docs/FAQ.html.in | 144 ------------------------------------------------ docs/Makefile.am | 3 +- docs/downloads.html.in | 29 ++++++++++ docs/search.php | 2 +- docs/sitemap.html.in | 2 +- 5 files changed, 32 insertions(+), 148 deletions(-) delete mode 100644 docs/FAQ.html.in diff --git a/docs/FAQ.html.in b/docs/FAQ.html.in deleted file mode 100644 index 50f798d..0000000 --- a/docs/FAQ.html.in +++ /dev/null @@ -1,144 +0,0 @@ -<?xml version="1.0"?> -<html> - <body> - <h1 >FAQ</h1> - Table of Contents: - <ul> - <li> - <a href="FAQ.html#License">License(s)</a> - </li> - <li> - <a href="FAQ.html#Installati">Installation</a> - </li> - <li> - <a href="FAQ.html#Compilatio">Compilation</a> - </li> - <li> - <a href="FAQ.html#Developer">Developer corner</a> - </li> - </ul> - <h3><a name="License" id="License">License</a>(s)</h3> - <ol> - <li> - Licensing Terms for libvirt - libvirt is released under the <a href="http://www.opensource.org/licenses/lgpl-license.html">GNU Lesser - General Public License</a>, see the file COPYING.LIB in the distribution - for the precise wording. The only library that libvirt depends upon is - the Xen store access library which is also licenced under the LGPL. - </li> - <li> - Can I embed libvirt in a proprietary application ? - Yes. The LGPL allows you to embed libvirt into a proprietary - application. It would be graceful to send-back bug fixes and improvements - as patches for possible incorporation in the main development tree. It - will decrease your maintenance costs anyway if you do so. - </li> - </ol> - <h3> - <a name="Installati" id="Installati">Installation</a> - </h3> - <ol> - <li>Where can I get libvirt ? - The original distribution comes from <a href="ftp://libvirt.org/libvirt/">ftp://libvirt.org/libvirt/</a>. - </li> - <li> - I can't install the libvirt/libvirt-devel RPM packages due to - failed dependencies - The most generic solution is to re-fetch the latest src.rpm , and - rebuild it locally with - <code>rpm --rebuild libvirt-xxx.src.rpm</code>. - If everything goes well it will generate two binary rpm packages (one - providing the shared libs and virsh, and the other one, the -devel - package, providing includes, static libraries and scripts needed to build - applications with libvirt that you can install locally. - One can also rebuild the RPMs from a tarball: - - <code>rpmbuild -ta libdir-xxx.tar.gz</code> - - Or from a configured tree with: - - <code>make rpm</code> - - </li> - <li> - Failure to use the API for non-root users - Large parts of the API may only be accessible with root privileges, - however the read only access to the xenstore data doesnot have to be - forbidden to user, at least for monitoring purposes. If "virsh dominfo" - fails to run as an user, change the mode of the xenstore read-only socket - with: - - <code>chmod 666 /var/run/xenstored/socket_ro</code> - - and also make sure that the Xen Daemon is running correctly with local - HTTP server enabled, this is defined in - <code>/etc/xen/xend-config.sxp</code> which need the following line to be - enabled: - - <code>(xend-http-server yes)</code> - - If needed restart the xend daemon after making the change with the - following command run as root: - - <code>service xend restart</code> - - </li> - </ol> - <h3> - <a name="Compilatio" id="Compilatio">Compilation</a> - </h3> - <ol> - <li> - What is the process to compile libvirt ? - As most UNIX libraries libvirt follows the "standard": - - <code>gunzip -c libvirt-xxx.tar.gz | tar xvf -</code> - - - <code>cd libvirt-xxxx</code> - - - <code>./configure --help</code> - - to see the options, then the compilation/installation proper - - <code>./configure [possible options]</code> - - - <code>make</code> - - - <code>make install</code> - - At that point you may have to rerun ldconfig or a similar utility to - update your list of installed shared libs. - </li> - <li> - What other libraries are needed to compile/install libvirt ? - Libvirt requires libxenstore, which is usually provided by the xen - packages as well as the public headers to compile against libxenstore. - </li> - <li> - I use the GIT version and there is no configure script - The configure script (and other Makefiles) are generated. Use the - autogen.sh script to regenerate the configure script and Makefiles, - like: - - <code>./autogen.sh --prefix=/usr --disable-shared</code> - - </li> - </ol> - <h3><a name="Developer" id="Developer">Developer</a> corner</h3> - <ol> - <li> - Troubles compiling or linking programs using libvirt - To simplify the process of reusing the library, libvirt comes with - pkgconfig support, which can be used directly from autoconf support or - via the pkg-config command line tool, like: - - <code>pkg-config libvirt --libs</code> - - </li> - </ol> - </body> -</html> diff --git a/docs/Makefile.am b/docs/Makefile.am index a6a6d07..114ea1f 100644 --- a/docs/Makefile.am +++ b/docs/Makefile.am @@ -159,8 +159,7 @@ rebuild: api all install-data-local: $(mkinstalldirs) $(DESTDIR)$(HTML_DIR) - -$(INSTALL) -m 0644 $(srcdir)/FAQ.html \ - $(srcdir)/Libxml2-Logo-90x34.gif $(DESTDIR)$(HTML_DIR) + -$(INSTALL) -m 0644 $(srcdir)/Libxml2-Logo-90x34.gif $(DESTDIR)$(HTML_DIR) $(mkinstalldirs) $(DESTDIR)$(HTML_DIR)/html for h in $(apihtml); do \ $(INSTALL) -m 0644 $(srcdir)/$$h $(DESTDIR)$(HTML_DIR)/html; done diff --git a/docs/downloads.html.in b/docs/downloads.html.in index a0cb6fc..04fd16c 100644 --- a/docs/downloads.html.in +++ b/docs/downloads.html.in @@ -43,6 +43,35 @@ <a href="http://libvirt.org/git/?p=libvirt.git;a=summary">http://libvirt.org/git/?p=libvirt.git;a=summary</a> </pre> + + <h1>Installation</h1> + <h2> + <a name="Compilatio" id="Compilatio">Compilation</a> + </h2> + As most UNIX libraries libvirt follows the "standard": + + <code>gunzip -c libvirt-xxx.tar.gz | tar xvf -</code> + + + <code>cd libvirt-xxxx</code> + + + <code>./configure --help</code> + + to see the options, then the compilation/installation proper + + <code>./configure [possible options]</code> + + + <code>make</code> + + + <code>make install</code> + + At that point you may have to rerun ldconfig or a similar utility to + update your list of installed shared libs. + + <h2>Building from a source code checkout</h2> The libvirt build process uses GNU autotools, so after obtaining a checkout it is necessary to generate the configure script and Makefile.in diff --git a/docs/search.php b/docs/search.php index a6c1def..bbd652a 100644 --- a/docs/search.php +++ b/docs/search.php @@ -258,7 +258,7 @@ </li><li> <a title="User contributed content" class="inactive" href="http://wiki.libvirt.org">Wiki</a> </li><li> - <a title="Frequently asked questions" class="inactive" href="FAQ.html">FAQ</a> + <a title="Frequently asked questions" class="inactive" href="http://wiki.libvirt.org/page/FAQ">FAQ</a> </li><li> <a title="How and where to report bugs and request features" class="inactive" href="bugs.html">Bug reports</a> </li><li> diff --git a/docs/sitemap.html.in b/docs/sitemap.html.in index 404ce5a..e9ab591 100644 --- a/docs/sitemap.html.in +++ b/docs/sitemap.html.in @@ -265,7 +265,7 @@ User contributed content </li> <li> - <a href="FAQ.html">FAQ</a> + <a href="http://wiki.libvirt.org/page/FAQ">FAQ</a> Frequently asked questions </li> <li> -- 1.7.1.1

2 2

[libvirt] [PATCH] qemu: Error on unsupported graphics config
by Cole Robinson 27 Jul '10

27 Jul '10

Throw an explicit error if multiple graphics devices are specified, or an unsupported type is specified (rdp). Signed-off-by: Cole Robinson <crobinso(a)redhat.com> --- src/qemu/qemu_conf.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index 0dbab48..05ad67d 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -4542,6 +4542,12 @@ int qemudBuildCommandLine(virConnectPtr conn, } } + if (def->ngraphics > 1) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, + "%s", _("only 1 graphics device is supported")); + goto error; + } + if ((def->ngraphics == 1) && def->graphics[0]->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC) { virBuffer opt = VIR_BUFFER_INITIALIZER; @@ -4641,6 +4647,12 @@ int qemudBuildCommandLine(virConnectPtr conn, * default, since the default changes :-( */ if (qemuCmdFlags & QEMUD_CMD_FLAG_SDL) ADD_ARG_LIT("-sdl"); + + } else if ((def->ngraphics == 1)) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, + _("unsupported graphics type '%s'"), + virDomainGraphicsTypeToString(def->graphics[0]->type)); + goto error; } if (def->nvideos) { -- 1.7.1.1

2 2

[libvirt] [PATCH] libvirt-guests: Don't throw errors if libvirtd is not installed
by Jiri Denemark 27 Jul '10

27 Jul '10

When only client parts of libvirt are installed (i.e., no libvirtd daemon), libvirt-guests init script in its default configuration would throw seriously looking errors during host shutdown: Running guests on default URI: error: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: No such file or directory error: failed to connect to the hypervisor This patch changes the script to print rather harmless message in that situation: Running guests on default URI: libvirtd not installed; skipping this URI. --- daemon/libvirt-guests.init.in | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/daemon/libvirt-guests.init.in b/daemon/libvirt-guests.init.in index f99c070..d2ec96a 100644 --- a/daemon/libvirt-guests.init.in +++ b/daemon/libvirt-guests.init.in @@ -25,6 +25,7 @@ sysconfdir=@sysconfdir@ localstatedir=@localstatedir@ +libvirtd=@sbindir@/libvirtd # Source function library. . "$sysconfdir"/rc.d/init.d/functions @@ -232,6 +233,12 @@ stop() { : >"$LISTFILE" for uri in $URIS; do echo -n $"Running guests on $uri URI: " + + if [ "x$uri" = xdefault ] && [ ! -x "$libvirtd" ]; then + echo $"libvirtd not installed; skipping this URI." + continue + fi + list=$(list_guests $uri) if [ $? -eq 0 ]; then empty=true -- 1.7.2

2 2

[libvirt] Virt-install Error and kvm‏
by cris rock 27 Jul '10

27 Jul '10

Hi guys, I hope you can help me on this issue with kvm/libvirt: using this command to install a kvm virtual machine: virt-install --connect qemu:///system \ --name p3k0401 \ --ram 2048 \ --file //dev/VolGroup01/p3k0401logvol \ --accelerate \ -s 10 \ --nographics \ --hvm \ --location='http://10.1.4.80' I get: Starting install... Retrieving file vmlinuz... | 1.8 MB 00:00 Retrieving file initrd.img... | 7.1 MB 00:00 ERROR internal error Domain p3k0401 didn't show up Domain installation may not have been successful. If it was, you can restart your domain by running 'virsh start p3k0401'; otherwise, please restart your installation. ERROR internal error Domain p3k0401 didn't show up Traceback (most recent call last): File "/usr/sbin/virt-install", line 889, in ? main() File "/usr/sbin/virt-install", line 751, in main start_time, guest.start_install) File "/usr/sbin/virt-install", line 813, in do_install dom = install_func(conscb, progresscb, wait=(not wait)) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 541, in start_install return self._do_install(consolecb, meter, removeOld, wait) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 633, in _do_install self.domain = self.conn.createLinux(install_xml, 0) File "/usr/lib64/python2.4/site-packages/libvirt.py", line 974, in createLinux if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self) libvirtError: internal error Domain p3k0401 didn't show up On the /var/log/libvirt/qemu/p3k0401.log: LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin HOME=/ /usr/bin/qemu-system-x86_64 -S -M rhel5.4.0 -m 1024 -smp 1 -name p3k0401 -uuid 7658c102-0738-724c-40eb-e1c58b2c2369 -domid 3 -nographic -monitor pty -pidfile /var/run/libvirt/qemu//p3k0401.pid -no-reboot -boot c -kernel /var/lib/libvirt/boot/virtinst-vmlinuz.O_SOVo -initrd /var/lib/libvirt/boot/virtinst-initrd.img.0ba0Fp -append method=http://10.1.4.80 -drive file=//dev/VolGroup01/p3k0401logvol,if=ide,index=0,cache=none -net nic,macaddr=54:52:00:15:c4:50,vlan=0 -net tap,fd=16,script=,vlan=0,ifname=vnet0 -serial pty -parallel none -usb Supported machines are: pc Standard PC (alias of pc-0.12) pc-0.12 Standard PC (default) pc-0.11 Standard PC, qemu 0.11 pc-0.10 Standard PC, qemu 0.10 isapc ISA-only PC xenpv Xen Para-virtualized PC And my packages installed: # rpm -qa | grep qemu qemu-0.12.4-1.el5.rf # rpm -qa | grep kvm etherboot-zroms-kvm-5.4.4-13.el5.centos kmod-kvm-83-164.el5_5.12 kvm-83-164.el5_5.12 # rpm -qa | grep libvirt libvirt-0.6.3-33.el5_5.1 libvirt-0.6.3-33.el5_5.1 libvirt-python-0.6.3-33.el5_5.1 # uname -a Linux gs1p304 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux Please any pointer is appreciated... thanks! cris _________________________________________________________________ Hotmail: Free, trusted and rich email service. https://signup.live.com/signup.aspx?id=60969

1 0

[libvirt] Virt-install Error on Centos 5.4 64bit and kvm
by cris rock 27 Jul '10

27 Jul '10

_________________________________________________________________ Hotmail: Free, trusted and rich email service. https://signup.live.com/signup.aspx?id=60969

1 0