- Devel - libvirt List Archives

[libvirt] libvirt cannot be built with -Werror on RHEL6RC(x86_64)
by Wen Congyang 12 May '11

12 May '11

My steps to build libvirt: 1. # export CFLAGS=-Werror 2. # ./autogen.sh 3. # make dist && rpmbuild --nodeps --define "_sourcedir `pwd`" -ba libvirt.spec ... checking for msgmerge... /usr/bin/msgmerge checking whether NLS is requested... yes checking for GNU gettext in libc... no checking for iconv... yes checking for GNU gettext in libintl... no checking whether to use NLS... no checking for UDEV... yes checking for PCIACCESS... yes ... + rm -f /home/wency/rpmbuild/BUILDROOT/libvirt-0.9.1-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml + rm -f /home/wency/rpmbuild/BUILDROOT/libvirt-0.9.1-1.el6.x86_64/etc/libvirt/qemu/networks/autostart/default.xml + sed -i -e '/<uuid>/d' /home/wency/rpmbuild/BUILDROOT/libvirt-0.9.1-1.el6.x86_64/usr/share/libvirt/networks/default.xml + /usr/lib/rpm/find-lang.sh /home/wency/rpmbuild/BUILDROOT/libvirt-0.9.1-1.el6.x86_64 libvirt No translations found for libvirt in /home/wency/rpmbuild/BUILDROOT/libvirt-0.9.1-1.el6.x86_64 error: Bad exit status from /var/tmp/rpm-tmp.nSgCNo (%install) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.nSgCNo (%install) 4. # cat config.log ... configure:82567: checking for GNU gettext in libc configure:82596: gcc -std=gnu99 -o conftest -Werror conftest.c -ldl >&5 cc1: warnings being treated as errors conftest.c: In function 'main': conftest.c:468: error: cast from pointer to integer of different size configure:82603: $? = 1 configure: failed program was: ... | int | main () | { | bindtextdomain ("", ""); | return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings | ; | return 0; | } configure:82623: result: no ... 5. # cat po/Makefile.in.in ... install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all $(mkinstalldirs) $(DESTDIR)$(datadir) ... gettext() returns char *, and we try to convert it to int. The size of pointer and int is different, and gcc will give a warning. I build it with -Werror, so the test program can not be built, and NLS is disabled. But We only install translations when NLS is enabled.

2 5

[libvirt] [PATCH] remote: remove special case for getting version
by Eric Blake 12 May '11

12 May '11

* src/remote/remote_protocol.x (remote_get_version_ret) (remote_get_lib_version_ret): Match public API. * daemon/remote_generator.pl: Drop special case. --- By the way, the previous patch and this one both assume that Matthias' generator whitelist patch is applied. daemon/remote_generator.pl | 23 +++++++++-------------- src/remote/remote_protocol.x | 4 ++-- 2 files changed, 11 insertions(+), 16 deletions(-) diff --git a/daemon/remote_generator.pl b/daemon/remote_generator.pl index c53ebc8..6d91d15 100755 --- a/daemon/remote_generator.pl +++ b/daemon/remote_generator.pl @@ -504,13 +504,6 @@ elsif ($opt_b) { $type_name = $1 if ($1); $type_name .= "long"; - if ($type_name eq "long" and - $calls{$_}->{ProcName} =~ m/^Get(Lib)?Version$/) { - # SPECIAL: virConnectGet(Lib)?Version uses unsigned long - # in public API but hyper in XDR protocol - $type_name = "unsigned long"; - } - push(@vars_list, "$type_name $ret_name"); push(@ret_list, "ret->$ret_name = $ret_name;"); $single_ret_var = $ret_name; @@ -990,19 +983,21 @@ elsif ($opt_k) { $single_ret_type = "int"; } elsif ($ret_member =~ m/^unsigned hyper (\S+);/) { my $arg_name = $1; - push(@ret_list, "rv = ret.$arg_name;"); - $single_ret_var = "unsigned long rv = 0"; - $single_ret_type = "unsigned long"; - } elsif ($ret_member =~ m/^hyper (\S+);/) { - my $arg_name = $1; - if ($call->{ProcName} =~ m/Get(Lib)?Version/) { push(@args_list, "unsigned long *$arg_name"); push(@ret_list, "if ($arg_name) *$arg_name = ret.$arg_name;"); push(@ret_list, "rv = 0;"); $single_ret_var = "int rv = -1"; $single_ret_type = "int"; - } elsif ($call->{ProcName} eq "NodeGetFreeMemory") { + } else { + push(@ret_list, "rv = ret.$arg_name;"); + $single_ret_var = "unsigned long rv = 0"; + $single_ret_type = "unsigned long"; + } + } elsif ($ret_member =~ m/^hyper (\S+);/) { + my $arg_name = $1; + + if ($call->{ProcName} eq "NodeGetFreeMemory") { push(@ret_list, "rv = ret.$arg_name;"); $single_ret_var = "unsigned long long rv = 0"; $single_ret_type = "unsigned long long"; diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x index 0b88353..04937e2 100644 --- a/src/remote/remote_protocol.x +++ b/src/remote/remote_protocol.x @@ -391,11 +391,11 @@ struct remote_get_type_ret { }; struct remote_get_version_ret { - hyper hv_ver; + unsigned hyper hv_ver; }; struct remote_get_lib_version_ret { - hyper lib_ver; + unsigned hyper lib_ver; }; struct remote_get_hostname_ret { -- 1.7.4.4

2 2

[libvirt] [PATCH] fix documentation for cputune parameters
by Igor Serebryany 12 May '11

12 May '11

this re-adds the example section originally written by Osier Yang, and indicates the version in which the cputune parameters became available in libvirt. --- docs/formatdomain.html.in | 28 ++++++++++++++++++++++------ 1 files changed, 22 insertions(+), 6 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index dcfcd94..f3bf8fd 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -288,6 +288,13 @@ <min_guarantee>65536</min_guarantee> </memtune> <vcpu cpuset="1-4,^3,6" current="1">2</vcpu> + <cputune> + <vcpupin vcpu="0" cpuset="1-4,^2"> + <vcpupin vcpu="1" cpuset="0,1"> + <vcpupin vcpu="2" cpuset="2,3"> + <vcpupin vcpu="3" cpuset="0,4"> + <cpushares>2048</cpushares> + </cputune> ...</pre> <dl> @@ -351,21 +358,30 @@ virtual CPUs should be enabled. </dd> <dt><code>cputune</code></dt> - <dd> The optional <code>cputune</code> element provides details - regarding the cpu tunable parameters for the domain.</dd> + <dd> + The optional <code>cputune</code> element provides details + regarding the cpu tunable parameters for the domain. + <span class="since">Since 0.9.0</span> + </dd> <dt><code>vcpupin</code></dt> - <dd> The optional <code>vcpupin</code> element specifies which of host + <dd> + The optional <code>vcpupin</code> element specifies which of host physical CPUS the domain VCPU will be pinned to. If this is ommited, each VCPU pinned to all the physical CPUS by default. It contains two required attributes, the attribute <code>vcpu</code> specifies vcpu id, and the attribute <code>cpuset</code> is same as attribute <code>cpuset</code> - of element <code>vcpu</code>. NB, Only qemu driver supports</dd> + of element <code>vcpu</code>. (NB: Only qemu driver support) + <span class="since">Since 0.9.0</span> + </dd> <dt><code>shares</code></dt> - <dd> The optional <code>shares</code> element specifies the proportional + <dd> + The optional <code>shares</code> element specifies the proportional weighted share for the domain. If this is ommited, it defaults to the OS provided defaults. NB, There is no unit for the value, it's a relative measure based on the setting of other VM, e.g. A VM configured with value - 2048 will get twice as much CPU time as a VM configured with value 1024.</dd> + 2048 will get twice as much CPU time as a VM configured with value 1024. + <span class="since">Since 0.9.0</span> + </dd> </dl> <h3><a name="elementsCPU">CPU model and topology</a></h3> -- 1.7.1

2 1

[libvirt] How to suppress the message "DHCP packet received on eth<N> which has no address"
by Mark Wu 12 May '11

12 May '11

Hi Guys, The following message was reported to "/var/log/messages" on a server when there's no ip address configured on an interface, like a slave of bonding. "dnsmasq-dhcp[XXXX]: DHCP packet received on eth1 which has no address" The dnsmasq command line: nobody 21564 0.0 0.0 12796 604 ? S 15:37 0:00 /usr/sbin/dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/default.pid --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override I have verified that this message could be suppressed by appending "--interface=virbr0" manually. But currently libvirt doesn't use the option "--interface" in order to be compatible with old dnsmasq (< 2.47). Then how to resolve this problem? One idea is changing the behaviour of "--bind-interfaces" for dhcp. Currently, even with "--bind-interfaces" and "--listen-address", dnsmasq listens on all interfaces, not like dns which only listens on the specified address. The other is just adding "--interface" and let people who're using IPv6 upgrade dnsmasq. What's your opinions? Thanks

1 0

[libvirt] [PATCH] remote generator: Add skipgen/autogen flags to .x files
by Matthias Bolte 12 May '11

12 May '11

Make procedure parsing more robust, by allowing arbitrary amounts of whitespaces. Also make some error messages more verbose. --- cfg.mk | 2 +- daemon/remote_generator.pl | 165 ++++----------- src/remote/qemu_protocol.x | 5 +- src/remote/remote_protocol.x | 463 +++++++++++++++++++++--------------------- 4 files changed, 282 insertions(+), 353 deletions(-) diff --git a/cfg.mk b/cfg.mk index 9ee0dd0..f0ca000 100644 --- a/cfg.mk +++ b/cfg.mk @@ -614,7 +614,7 @@ exclude_file_name_regexp--sc_prohibit_asprintf = \ exclude_file_name_regexp--sc_prohibit_can_not = ^po/ exclude_file_name_regexp--sc_prohibit_close = \ - (\.py$$|^docs/|(src/util/files\.c|src/libvirt\.c)$$) + (\.py$$|^docs/|(src/util/files\.c|src/libvirt\.c|daemon/remote_generator\.pl)$$) exclude_file_name_regexp--sc_prohibit_doubled_word = ^po/ diff --git a/daemon/remote_generator.pl b/daemon/remote_generator.pl index 79d2021..bce6261 100755 --- a/daemon/remote_generator.pl +++ b/daemon/remote_generator.pl @@ -23,9 +23,11 @@ use Getopt::Std; our ($opt_p, $opt_t, $opt_a, $opt_r, $opt_d, $opt_c, $opt_b, $opt_k); getopts ('ptardcbk'); -my $structprefix = $ARGV[0]; +my $structprefix = shift or die "missing prefix argument"; +my $protocol = shift or die "missing protocol argument"; +my @autogen; + my $procprefix = uc $structprefix; -shift; # Convert name_of_call to NameOfCall. sub name_to_ProcName { @@ -41,7 +43,7 @@ sub name_to_ProcName { # Read the input file (usually remote_protocol.x) and form an # opinion about the name, args and return type of each RPC. -my ($name, $ProcName, $id, %calls, @calls); +my ($name, $ProcName, $id, $flags, $gen, %calls, @calls); # only generate a close method if -c was passed if ($opt_c) { @@ -59,7 +61,9 @@ my $collect_args_members = 0; my $collect_ret_members = 0; my $last_name; -while (<>) { +open PROTOCOL, "<$protocol" or die "cannot open $protocol: $!"; + +while (<PROTOCOL>) { if ($collect_args_members) { if (/^};/) { $collect_args_members = 0; @@ -124,11 +128,28 @@ while (<>) { $collect_args_members = 0; $collect_ret_members = 0; - } elsif (/^\s*${procprefix}_PROC_(.*?)\s+=\s+(\d+),?$/) { + } elsif (/^\s*${procprefix}_PROC_(.*?)\s*=\s*(\d+)\s*,?(.*)$/) { $name = lc $1; $id = $2; + $flags = $3; $ProcName = name_to_ProcName ($name); + if ($opt_b or $opt_k) { + if (!($flags =~ m/^\s*\/\*\s*(\S+)\s+(\S+)\s*\*\/\s*$/)) { + die "invalid generator flags for ${procprefix}_PROC_${name}" + } + + $gen = $opt_b ? $1 : $2; + + if ($gen eq "autogen") { + push(@autogen, $ProcName); + } elsif ($gen eq "skipgen") { + # ignore it + } else { + die "invalid generator flags for ${procprefix}_PROC_${name}" + } + } + $calls[$id] = $calls{$name}; $collect_args_members = 0; @@ -139,6 +160,8 @@ while (<>) { } } +close(PROTOCOL); + #---------------------------------------------------------------------- # Output @@ -238,63 +261,15 @@ elsif ($opt_t) { # Bodies for dispatch functions ("remote_dispatch_bodies.h"). elsif ($opt_b) { - # list of functions that currently are not generatable - my @ungeneratable; - - if ($structprefix eq "remote") { - @ungeneratable = ("Close", - "DomainEventsDeregisterAny", - "DomainEventsRegisterAny", - "DomainMigratePrepareTunnel", - "DomainOpenConsole", - "DomainPinVcpu", - "DomainSetSchedulerParameters", - "DomainSetMemoryParameters", - "DomainSetBlkioParameters", - "Open", - "StorageVolUpload", - "StorageVolDownload", - - "AuthList", - "AuthSaslInit", - "AuthSaslStart", - "AuthSaslStep", - "AuthPolkit", - - "DomainBlockPeek", - "DomainCreateWithFlags", - "DomainEventsDeregister", - "DomainEventsRegister", - "DomainGetBlkioParameters", - "DomainGetMemoryParameters", - "DomainGetSchedulerParameters", - "DomainGetSchedulerType", - "DomainGetSecurityLabel", - "DomainGetVcpus", - "DomainMemoryPeek", - "DomainMemoryStats", - "DomainMigratePrepare", - "DomainMigratePrepare2", - "GetType", - "NodeDeviceGetParent", - "NodeGetSecurityModel", - "SecretGetValue"); - } elsif ($structprefix eq "qemu") { - @ungeneratable = ("MonitorCommand"); - } - - my %ug = map { $_ => 1 } @ungeneratable; + my %generate = map { $_ => 1 } @autogen; my @keys = sort (keys %calls); foreach (@keys) { # skip things which are REMOTE_MESSAGE next if $calls{$_}->{msg}; - if (exists($ug{$calls{$_}->{ProcName}})) { - print "\n/* ${structprefix}Dispatch$calls{$_}->{ProcName} has " . - "to be implemented manually */\n"; - next; - } + # skip procedures not on generate list + next if ! exists($generate{$calls{$_}->{ProcName}}); my $has_node_device = 0; my @vars_list = (); @@ -550,6 +525,8 @@ elsif ($opt_b) { } else { $single_ret_by_ref = 1; } + } elsif ($ret_member =~ m/^(\/)?\*/) { + # ignore comments } else { die "unhandled type for return value: $ret_member"; } @@ -756,63 +733,7 @@ elsif ($opt_b) { # Bodies for client functions ("remote_client_bodies.h"). elsif ($opt_k) { - # list of functions that currently are not generatable - my @ungeneratable; - - if ($structprefix eq "remote") { - @ungeneratable = ("Close", - "DomainEventsDeregisterAny", - "DomainEventsRegisterAny", - "DomainMigratePrepareTunnel", - "DomainOpenConsole", - "DomainSetSchedulerParameters", - "DomainSetMemoryParameters", - "DomainSetBlkioParameters", - "Open", - "StorageVolUpload", - "StorageVolDownload", - - "AuthList", - "AuthSaslInit", - "AuthSaslStart", - "AuthSaslStep", - "AuthPolkit", - - "DomainCreate", - "DomainDestroy", - "FindStoragePoolSources", - "IsSecure", - "SupportsFeature", - "NodeGetCellsFreeMemory", - "ListDomains", - "GetURI", - "NodeDeviceDettach", - "NodeDeviceReset", - "NodeDeviceReAttach", - - "DomainBlockPeek", - "DomainCreateWithFlags", - "DomainEventsDeregister", - "DomainEventsRegister", - "DomainGetBlkioParameters", - "DomainGetMemoryParameters", - "DomainGetSchedulerParameters", - "DomainGetSchedulerType", - "DomainGetSecurityLabel", - "DomainGetVcpus", - "DomainMemoryPeek", - "DomainMemoryStats", - "DomainMigratePrepare", - "DomainMigratePrepare2", - "GetType", - "NodeDeviceGetParent", - "NodeGetSecurityModel", - "SecretGetValue"); - } elsif ($structprefix eq "qemu") { - @ungeneratable = ("MonitorCommand"); - } - - my %ug = map { $_ => 1 } @ungeneratable; + my %generate = map { $_ => 1 } @autogen; my @keys = sort (keys %calls); foreach (@keys) { @@ -821,11 +742,8 @@ elsif ($opt_k) { # skip things which are REMOTE_MESSAGE next if $call->{msg}; - if (exists($ug{$call->{ProcName}})) { - print "\n/* ${structprefix}Dispatch$call->{ProcName} has to " . - "be implemented manually */\n"; - next; - } + # skip procedures not on generate list + next if ! exists($generate{$call->{ProcName}}); # handle arguments to the function my @args_list = (); @@ -1005,11 +923,13 @@ elsif ($opt_k) { push(@ret_list, "memcpy(result->$3, ret.$3, sizeof result->$3);"); } elsif ($ret_member =~ m/<\S+>;/ or $ret_member =~ m/\[\S+\];/) { # just make all other array types fail - die "unhandled type for multi-return-value: $ret_member"; + die "unhandled type for multi-return-value for " . + "procedure $call->{name}: $ret_member"; } elsif ($ret_member =~ m/^(unsigned )?(char|short|int|hyper) (\S+);/) { push(@ret_list, "result->$3 = ret.$3;"); } else { - die "unhandled type for multi-return-value: $ret_member"; + die "unhandled type for multi-return-value for " . + "procedure $call->{name}: $ret_member"; } } elsif ($ret_member =~ m/^remote_nonnull_string (\S+)<(\S+)>;/) { $single_ret_as_list = 1; @@ -1095,8 +1015,11 @@ elsif ($opt_k) { } else { die "unhandled type for return value: $ret_member"; } + } elsif ($ret_member =~ m/^(\/)?\*/) { + # ignore comments } else { - die "unhandled type for return value: $ret_member"; + die "unhandled type for return value for procedure " . + "$call->{name}: $ret_member"; } } } diff --git a/src/remote/qemu_protocol.x b/src/remote/qemu_protocol.x index 9eed73f..fa453f4 100644 --- a/src/remote/qemu_protocol.x +++ b/src/remote/qemu_protocol.x @@ -42,5 +42,8 @@ const QEMU_PROGRAM = 0x20008087; const QEMU_PROTOCOL_VERSION = 1; enum qemu_procedure { - QEMU_PROC_MONITOR_COMMAND = 1 + /* Each function must have a two-word comment. The first word is + * whether remote_generator.pl handles daemon, the second whether + * it handles src/remote. */ + QEMU_PROC_MONITOR_COMMAND = 1 /* skipgen skipgen */ }; diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x index 2cf6022..0b88353 100644 --- a/src/remote/remote_protocol.x +++ b/src/remote/remote_protocol.x @@ -1953,236 +1953,239 @@ const REMOTE_PROGRAM = 0x20008086; const REMOTE_PROTOCOL_VERSION = 1; enum remote_procedure { - REMOTE_PROC_OPEN = 1, - REMOTE_PROC_CLOSE = 2, - REMOTE_PROC_GET_TYPE = 3, - REMOTE_PROC_GET_VERSION = 4, - REMOTE_PROC_GET_MAX_VCPUS = 5, - REMOTE_PROC_NODE_GET_INFO = 6, - REMOTE_PROC_GET_CAPABILITIES = 7, - REMOTE_PROC_DOMAIN_ATTACH_DEVICE = 8, - REMOTE_PROC_DOMAIN_CREATE = 9, - REMOTE_PROC_DOMAIN_CREATE_XML = 10, - - REMOTE_PROC_DOMAIN_DEFINE_XML = 11, - REMOTE_PROC_DOMAIN_DESTROY = 12, - REMOTE_PROC_DOMAIN_DETACH_DEVICE = 13, - REMOTE_PROC_DOMAIN_GET_XML_DESC = 14, - REMOTE_PROC_DOMAIN_GET_AUTOSTART = 15, - REMOTE_PROC_DOMAIN_GET_INFO = 16, - REMOTE_PROC_DOMAIN_GET_MAX_MEMORY = 17, - REMOTE_PROC_DOMAIN_GET_MAX_VCPUS = 18, - REMOTE_PROC_DOMAIN_GET_OS_TYPE = 19, - REMOTE_PROC_DOMAIN_GET_VCPUS = 20, - - REMOTE_PROC_LIST_DEFINED_DOMAINS = 21, - REMOTE_PROC_DOMAIN_LOOKUP_BY_ID = 22, - REMOTE_PROC_DOMAIN_LOOKUP_BY_NAME = 23, - REMOTE_PROC_DOMAIN_LOOKUP_BY_UUID = 24, - REMOTE_PROC_NUM_OF_DEFINED_DOMAINS = 25, - REMOTE_PROC_DOMAIN_PIN_VCPU = 26, - REMOTE_PROC_DOMAIN_REBOOT = 27, - REMOTE_PROC_DOMAIN_RESUME = 28, - REMOTE_PROC_DOMAIN_SET_AUTOSTART = 29, - REMOTE_PROC_DOMAIN_SET_MAX_MEMORY = 30, - - REMOTE_PROC_DOMAIN_SET_MEMORY = 31, - REMOTE_PROC_DOMAIN_SET_VCPUS = 32, - REMOTE_PROC_DOMAIN_SHUTDOWN = 33, - REMOTE_PROC_DOMAIN_SUSPEND = 34, - REMOTE_PROC_DOMAIN_UNDEFINE = 35, - REMOTE_PROC_LIST_DEFINED_NETWORKS = 36, - REMOTE_PROC_LIST_DOMAINS = 37, - REMOTE_PROC_LIST_NETWORKS = 38, - REMOTE_PROC_NETWORK_CREATE = 39, - REMOTE_PROC_NETWORK_CREATE_XML = 40, - - REMOTE_PROC_NETWORK_DEFINE_XML = 41, - REMOTE_PROC_NETWORK_DESTROY = 42, - REMOTE_PROC_NETWORK_GET_XML_DESC = 43, - REMOTE_PROC_NETWORK_GET_AUTOSTART = 44, - REMOTE_PROC_NETWORK_GET_BRIDGE_NAME = 45, - REMOTE_PROC_NETWORK_LOOKUP_BY_NAME = 46, - REMOTE_PROC_NETWORK_LOOKUP_BY_UUID = 47, - REMOTE_PROC_NETWORK_SET_AUTOSTART = 48, - REMOTE_PROC_NETWORK_UNDEFINE = 49, - REMOTE_PROC_NUM_OF_DEFINED_NETWORKS = 50, - - REMOTE_PROC_NUM_OF_DOMAINS = 51, - REMOTE_PROC_NUM_OF_NETWORKS = 52, - REMOTE_PROC_DOMAIN_CORE_DUMP = 53, - REMOTE_PROC_DOMAIN_RESTORE = 54, - REMOTE_PROC_DOMAIN_SAVE = 55, - REMOTE_PROC_DOMAIN_GET_SCHEDULER_TYPE = 56, - REMOTE_PROC_DOMAIN_GET_SCHEDULER_PARAMETERS = 57, - REMOTE_PROC_DOMAIN_SET_SCHEDULER_PARAMETERS = 58, - REMOTE_PROC_GET_HOSTNAME = 59, - REMOTE_PROC_SUPPORTS_FEATURE = 60, - - REMOTE_PROC_DOMAIN_MIGRATE_PREPARE = 61, - REMOTE_PROC_DOMAIN_MIGRATE_PERFORM = 62, - REMOTE_PROC_DOMAIN_MIGRATE_FINISH = 63, - REMOTE_PROC_DOMAIN_BLOCK_STATS = 64, - REMOTE_PROC_DOMAIN_INTERFACE_STATS = 65, - REMOTE_PROC_AUTH_LIST = 66, - REMOTE_PROC_AUTH_SASL_INIT = 67, - REMOTE_PROC_AUTH_SASL_START = 68, - REMOTE_PROC_AUTH_SASL_STEP = 69, - REMOTE_PROC_AUTH_POLKIT = 70, - - REMOTE_PROC_NUM_OF_STORAGE_POOLS = 71, - REMOTE_PROC_LIST_STORAGE_POOLS = 72, - REMOTE_PROC_NUM_OF_DEFINED_STORAGE_POOLS = 73, - REMOTE_PROC_LIST_DEFINED_STORAGE_POOLS = 74, - REMOTE_PROC_FIND_STORAGE_POOL_SOURCES = 75, - REMOTE_PROC_STORAGE_POOL_CREATE_XML = 76, - REMOTE_PROC_STORAGE_POOL_DEFINE_XML = 77, - REMOTE_PROC_STORAGE_POOL_CREATE = 78, - REMOTE_PROC_STORAGE_POOL_BUILD = 79, - REMOTE_PROC_STORAGE_POOL_DESTROY = 80, - - REMOTE_PROC_STORAGE_POOL_DELETE = 81, - REMOTE_PROC_STORAGE_POOL_UNDEFINE = 82, - REMOTE_PROC_STORAGE_POOL_REFRESH = 83, - REMOTE_PROC_STORAGE_POOL_LOOKUP_BY_NAME = 84, - REMOTE_PROC_STORAGE_POOL_LOOKUP_BY_UUID = 85, - REMOTE_PROC_STORAGE_POOL_LOOKUP_BY_VOLUME = 86, - REMOTE_PROC_STORAGE_POOL_GET_INFO = 87, - REMOTE_PROC_STORAGE_POOL_GET_XML_DESC = 88, - REMOTE_PROC_STORAGE_POOL_GET_AUTOSTART = 89, - REMOTE_PROC_STORAGE_POOL_SET_AUTOSTART = 90, - - REMOTE_PROC_STORAGE_POOL_NUM_OF_VOLUMES = 91, - REMOTE_PROC_STORAGE_POOL_LIST_VOLUMES = 92, - REMOTE_PROC_STORAGE_VOL_CREATE_XML = 93, - REMOTE_PROC_STORAGE_VOL_DELETE = 94, - REMOTE_PROC_STORAGE_VOL_LOOKUP_BY_NAME = 95, - REMOTE_PROC_STORAGE_VOL_LOOKUP_BY_KEY = 96, - REMOTE_PROC_STORAGE_VOL_LOOKUP_BY_PATH = 97, - REMOTE_PROC_STORAGE_VOL_GET_INFO = 98, - REMOTE_PROC_STORAGE_VOL_GET_XML_DESC = 99, - REMOTE_PROC_STORAGE_VOL_GET_PATH = 100, - - REMOTE_PROC_NODE_GET_CELLS_FREE_MEMORY = 101, - REMOTE_PROC_NODE_GET_FREE_MEMORY = 102, - REMOTE_PROC_DOMAIN_BLOCK_PEEK = 103, - REMOTE_PROC_DOMAIN_MEMORY_PEEK = 104, - REMOTE_PROC_DOMAIN_EVENTS_REGISTER = 105, - REMOTE_PROC_DOMAIN_EVENTS_DEREGISTER = 106, - REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE = 107, - REMOTE_PROC_DOMAIN_MIGRATE_PREPARE2 = 108, - REMOTE_PROC_DOMAIN_MIGRATE_FINISH2 = 109, - REMOTE_PROC_GET_URI = 110, - - REMOTE_PROC_NODE_NUM_OF_DEVICES = 111, - REMOTE_PROC_NODE_LIST_DEVICES = 112, - REMOTE_PROC_NODE_DEVICE_LOOKUP_BY_NAME = 113, - REMOTE_PROC_NODE_DEVICE_GET_XML_DESC = 114, - REMOTE_PROC_NODE_DEVICE_GET_PARENT = 115, - REMOTE_PROC_NODE_DEVICE_NUM_OF_CAPS = 116, - REMOTE_PROC_NODE_DEVICE_LIST_CAPS = 117, - REMOTE_PROC_NODE_DEVICE_DETTACH = 118, - REMOTE_PROC_NODE_DEVICE_RE_ATTACH = 119, - REMOTE_PROC_NODE_DEVICE_RESET = 120, - - REMOTE_PROC_DOMAIN_GET_SECURITY_LABEL = 121, - REMOTE_PROC_NODE_GET_SECURITY_MODEL = 122, - REMOTE_PROC_NODE_DEVICE_CREATE_XML = 123, - REMOTE_PROC_NODE_DEVICE_DESTROY = 124, - REMOTE_PROC_STORAGE_VOL_CREATE_XML_FROM = 125, - REMOTE_PROC_NUM_OF_INTERFACES = 126, - REMOTE_PROC_LIST_INTERFACES = 127, - REMOTE_PROC_INTERFACE_LOOKUP_BY_NAME = 128, - REMOTE_PROC_INTERFACE_LOOKUP_BY_MAC_STRING = 129, - REMOTE_PROC_INTERFACE_GET_XML_DESC = 130, - - REMOTE_PROC_INTERFACE_DEFINE_XML = 131, - REMOTE_PROC_INTERFACE_UNDEFINE = 132, - REMOTE_PROC_INTERFACE_CREATE = 133, - REMOTE_PROC_INTERFACE_DESTROY = 134, - REMOTE_PROC_DOMAIN_XML_FROM_NATIVE = 135, - REMOTE_PROC_DOMAIN_XML_TO_NATIVE = 136, - REMOTE_PROC_NUM_OF_DEFINED_INTERFACES = 137, - REMOTE_PROC_LIST_DEFINED_INTERFACES = 138, - REMOTE_PROC_NUM_OF_SECRETS = 139, - REMOTE_PROC_LIST_SECRETS = 140, - - REMOTE_PROC_SECRET_LOOKUP_BY_UUID = 141, - REMOTE_PROC_SECRET_DEFINE_XML = 142, - REMOTE_PROC_SECRET_GET_XML_DESC = 143, - REMOTE_PROC_SECRET_SET_VALUE = 144, - REMOTE_PROC_SECRET_GET_VALUE = 145, - REMOTE_PROC_SECRET_UNDEFINE = 146, - REMOTE_PROC_SECRET_LOOKUP_BY_USAGE = 147, - REMOTE_PROC_DOMAIN_MIGRATE_PREPARE_TUNNEL = 148, - REMOTE_PROC_IS_SECURE = 149, - REMOTE_PROC_DOMAIN_IS_ACTIVE = 150, - - REMOTE_PROC_DOMAIN_IS_PERSISTENT = 151, - REMOTE_PROC_NETWORK_IS_ACTIVE = 152, - REMOTE_PROC_NETWORK_IS_PERSISTENT = 153, - REMOTE_PROC_STORAGE_POOL_IS_ACTIVE = 154, - REMOTE_PROC_STORAGE_POOL_IS_PERSISTENT = 155, - REMOTE_PROC_INTERFACE_IS_ACTIVE = 156, - REMOTE_PROC_GET_LIB_VERSION = 157, - REMOTE_PROC_CPU_COMPARE = 158, - REMOTE_PROC_DOMAIN_MEMORY_STATS = 159, - REMOTE_PROC_DOMAIN_ATTACH_DEVICE_FLAGS = 160, - - REMOTE_PROC_DOMAIN_DETACH_DEVICE_FLAGS = 161, - REMOTE_PROC_CPU_BASELINE = 162, - REMOTE_PROC_DOMAIN_GET_JOB_INFO = 163, - REMOTE_PROC_DOMAIN_ABORT_JOB = 164, - REMOTE_PROC_STORAGE_VOL_WIPE = 165, - REMOTE_PROC_DOMAIN_MIGRATE_SET_MAX_DOWNTIME = 166, - REMOTE_PROC_DOMAIN_EVENTS_REGISTER_ANY = 167, - REMOTE_PROC_DOMAIN_EVENTS_DEREGISTER_ANY = 168, - REMOTE_PROC_DOMAIN_EVENT_REBOOT = 169, - REMOTE_PROC_DOMAIN_EVENT_RTC_CHANGE = 170, - - REMOTE_PROC_DOMAIN_EVENT_WATCHDOG = 171, - REMOTE_PROC_DOMAIN_EVENT_IO_ERROR = 172, - REMOTE_PROC_DOMAIN_EVENT_GRAPHICS = 173, - REMOTE_PROC_DOMAIN_UPDATE_DEVICE_FLAGS = 174, - REMOTE_PROC_NWFILTER_LOOKUP_BY_NAME = 175, - REMOTE_PROC_NWFILTER_LOOKUP_BY_UUID = 176, - REMOTE_PROC_NWFILTER_GET_XML_DESC = 177, - REMOTE_PROC_NUM_OF_NWFILTERS = 178, - REMOTE_PROC_LIST_NWFILTERS = 179, - REMOTE_PROC_NWFILTER_DEFINE_XML = 180, - - REMOTE_PROC_NWFILTER_UNDEFINE = 181, - REMOTE_PROC_DOMAIN_MANAGED_SAVE = 182, - REMOTE_PROC_DOMAIN_HAS_MANAGED_SAVE_IMAGE = 183, - REMOTE_PROC_DOMAIN_MANAGED_SAVE_REMOVE = 184, - REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML = 185, - REMOTE_PROC_DOMAIN_SNAPSHOT_GET_XML_DESC = 186, - REMOTE_PROC_DOMAIN_SNAPSHOT_NUM = 187, - REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_NAMES = 188, - REMOTE_PROC_DOMAIN_SNAPSHOT_LOOKUP_BY_NAME = 189, - REMOTE_PROC_DOMAIN_HAS_CURRENT_SNAPSHOT = 190, - - REMOTE_PROC_DOMAIN_SNAPSHOT_CURRENT = 191, - REMOTE_PROC_DOMAIN_REVERT_TO_SNAPSHOT = 192, - REMOTE_PROC_DOMAIN_SNAPSHOT_DELETE = 193, - REMOTE_PROC_DOMAIN_GET_BLOCK_INFO = 194, - REMOTE_PROC_DOMAIN_EVENT_IO_ERROR_REASON = 195, - REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS = 196, - REMOTE_PROC_DOMAIN_SET_MEMORY_PARAMETERS = 197, - REMOTE_PROC_DOMAIN_GET_MEMORY_PARAMETERS = 198, - REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS = 199, - REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS = 200, - - REMOTE_PROC_DOMAIN_OPEN_CONSOLE = 201, - REMOTE_PROC_DOMAIN_IS_UPDATED = 202, - REMOTE_PROC_GET_SYSINFO = 203, - REMOTE_PROC_DOMAIN_SET_MEMORY_FLAGS = 204, - REMOTE_PROC_DOMAIN_SET_BLKIO_PARAMETERS = 205, - REMOTE_PROC_DOMAIN_GET_BLKIO_PARAMETERS = 206, - REMOTE_PROC_DOMAIN_MIGRATE_SET_MAX_SPEED = 207, - REMOTE_PROC_STORAGE_VOL_UPLOAD = 208, - REMOTE_PROC_STORAGE_VOL_DOWNLOAD = 209, - REMOTE_PROC_DOMAIN_INJECT_NMI = 210 + /* Each function must have a two-word comment. The first word is + * whether remote_generator.pl handles daemon, the second whether + * it handles src/remote. */ + REMOTE_PROC_OPEN = 1, /* skipgen skipgen */ + REMOTE_PROC_CLOSE = 2, /* skipgen skipgen */ + REMOTE_PROC_GET_TYPE = 3, /* skipgen skipgen */ + REMOTE_PROC_GET_VERSION = 4, /* autogen autogen */ + REMOTE_PROC_GET_MAX_VCPUS = 5, /* autogen autogen */ + REMOTE_PROC_NODE_GET_INFO = 6, /* autogen autogen */ + REMOTE_PROC_GET_CAPABILITIES = 7, /* autogen autogen */ + REMOTE_PROC_DOMAIN_ATTACH_DEVICE = 8, /* autogen autogen */ + REMOTE_PROC_DOMAIN_CREATE = 9, /* autogen skipgen */ + REMOTE_PROC_DOMAIN_CREATE_XML = 10, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_DEFINE_XML = 11, /* autogen autogen */ + REMOTE_PROC_DOMAIN_DESTROY = 12, /* autogen skipgen */ + REMOTE_PROC_DOMAIN_DETACH_DEVICE = 13, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_XML_DESC = 14, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_AUTOSTART = 15, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_INFO = 16, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_MAX_MEMORY = 17, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_MAX_VCPUS = 18, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_OS_TYPE = 19, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_VCPUS = 20, /* skipgen skipgen */ + + REMOTE_PROC_LIST_DEFINED_DOMAINS = 21, /* autogen autogen */ + REMOTE_PROC_DOMAIN_LOOKUP_BY_ID = 22, /* autogen autogen */ + REMOTE_PROC_DOMAIN_LOOKUP_BY_NAME = 23, /* autogen autogen */ + REMOTE_PROC_DOMAIN_LOOKUP_BY_UUID = 24, /* autogen autogen */ + REMOTE_PROC_NUM_OF_DEFINED_DOMAINS = 25, /* autogen autogen */ + REMOTE_PROC_DOMAIN_PIN_VCPU = 26, /* skipgen autogen */ + REMOTE_PROC_DOMAIN_REBOOT = 27, /* autogen autogen */ + REMOTE_PROC_DOMAIN_RESUME = 28, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SET_AUTOSTART = 29, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SET_MAX_MEMORY = 30, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_SET_MEMORY = 31, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SET_VCPUS = 32, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SHUTDOWN = 33, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SUSPEND = 34, /* autogen autogen */ + REMOTE_PROC_DOMAIN_UNDEFINE = 35, /* autogen autogen */ + REMOTE_PROC_LIST_DEFINED_NETWORKS = 36, /* autogen autogen */ + REMOTE_PROC_LIST_DOMAINS = 37, /* autogen skipgen */ + REMOTE_PROC_LIST_NETWORKS = 38, /* autogen autogen */ + REMOTE_PROC_NETWORK_CREATE = 39, /* autogen autogen */ + REMOTE_PROC_NETWORK_CREATE_XML = 40, /* autogen autogen */ + + REMOTE_PROC_NETWORK_DEFINE_XML = 41, /* autogen autogen */ + REMOTE_PROC_NETWORK_DESTROY = 42, /* autogen autogen */ + REMOTE_PROC_NETWORK_GET_XML_DESC = 43, /* autogen autogen */ + REMOTE_PROC_NETWORK_GET_AUTOSTART = 44, /* autogen autogen */ + REMOTE_PROC_NETWORK_GET_BRIDGE_NAME = 45, /* autogen autogen */ + REMOTE_PROC_NETWORK_LOOKUP_BY_NAME = 46, /* autogen autogen */ + REMOTE_PROC_NETWORK_LOOKUP_BY_UUID = 47, /* autogen autogen */ + REMOTE_PROC_NETWORK_SET_AUTOSTART = 48, /* autogen autogen */ + REMOTE_PROC_NETWORK_UNDEFINE = 49, /* autogen autogen */ + REMOTE_PROC_NUM_OF_DEFINED_NETWORKS = 50, /* autogen autogen */ + + REMOTE_PROC_NUM_OF_DOMAINS = 51, /* autogen autogen */ + REMOTE_PROC_NUM_OF_NETWORKS = 52, /* autogen autogen */ + REMOTE_PROC_DOMAIN_CORE_DUMP = 53, /* autogen autogen */ + REMOTE_PROC_DOMAIN_RESTORE = 54, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SAVE = 55, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_SCHEDULER_TYPE = 56, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_GET_SCHEDULER_PARAMETERS = 57, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_SET_SCHEDULER_PARAMETERS = 58, /* skipgen skipgen */ + REMOTE_PROC_GET_HOSTNAME = 59, /* autogen autogen */ + REMOTE_PROC_SUPPORTS_FEATURE = 60, /* autogen skipgen */ + + REMOTE_PROC_DOMAIN_MIGRATE_PREPARE = 61, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_MIGRATE_PERFORM = 62, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MIGRATE_FINISH = 63, /* autogen autogen */ + REMOTE_PROC_DOMAIN_BLOCK_STATS = 64, /* autogen autogen */ + REMOTE_PROC_DOMAIN_INTERFACE_STATS = 65, /* autogen autogen */ + REMOTE_PROC_AUTH_LIST = 66, /* skipgen skipgen */ + REMOTE_PROC_AUTH_SASL_INIT = 67, /* skipgen skipgen */ + REMOTE_PROC_AUTH_SASL_START = 68, /* skipgen skipgen */ + REMOTE_PROC_AUTH_SASL_STEP = 69, /* skipgen skipgen */ + REMOTE_PROC_AUTH_POLKIT = 70, /* skipgen skipgen */ + + REMOTE_PROC_NUM_OF_STORAGE_POOLS = 71, /* autogen autogen */ + REMOTE_PROC_LIST_STORAGE_POOLS = 72, /* autogen autogen */ + REMOTE_PROC_NUM_OF_DEFINED_STORAGE_POOLS = 73, /* autogen autogen */ + REMOTE_PROC_LIST_DEFINED_STORAGE_POOLS = 74, /* autogen autogen */ + REMOTE_PROC_FIND_STORAGE_POOL_SOURCES = 75, /* autogen skipgen */ + REMOTE_PROC_STORAGE_POOL_CREATE_XML = 76, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_DEFINE_XML = 77, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_CREATE = 78, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_BUILD = 79, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_DESTROY = 80, /* autogen autogen */ + + REMOTE_PROC_STORAGE_POOL_DELETE = 81, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_UNDEFINE = 82, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_REFRESH = 83, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_LOOKUP_BY_NAME = 84, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_LOOKUP_BY_UUID = 85, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_LOOKUP_BY_VOLUME = 86, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_GET_INFO = 87, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_GET_XML_DESC = 88, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_GET_AUTOSTART = 89, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_SET_AUTOSTART = 90, /* autogen autogen */ + + REMOTE_PROC_STORAGE_POOL_NUM_OF_VOLUMES = 91, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_LIST_VOLUMES = 92, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_CREATE_XML = 93, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_DELETE = 94, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_LOOKUP_BY_NAME = 95, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_LOOKUP_BY_KEY = 96, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_LOOKUP_BY_PATH = 97, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_GET_INFO = 98, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_GET_XML_DESC = 99, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_GET_PATH = 100, /* autogen autogen */ + + REMOTE_PROC_NODE_GET_CELLS_FREE_MEMORY = 101, /* autogen skipgen */ + REMOTE_PROC_NODE_GET_FREE_MEMORY = 102, /* autogen autogen */ + REMOTE_PROC_DOMAIN_BLOCK_PEEK = 103, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_MEMORY_PEEK = 104, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENTS_REGISTER = 105, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENTS_DEREGISTER = 106, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE = 107, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MIGRATE_PREPARE2 = 108, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_MIGRATE_FINISH2 = 109, /* autogen autogen */ + REMOTE_PROC_GET_URI = 110, /* autogen skipgen */ + + REMOTE_PROC_NODE_NUM_OF_DEVICES = 111, /* autogen autogen */ + REMOTE_PROC_NODE_LIST_DEVICES = 112, /* autogen autogen */ + REMOTE_PROC_NODE_DEVICE_LOOKUP_BY_NAME = 113, /* autogen autogen */ + REMOTE_PROC_NODE_DEVICE_GET_XML_DESC = 114, /* autogen autogen */ + REMOTE_PROC_NODE_DEVICE_GET_PARENT = 115, /* skipgen skipgen */ + REMOTE_PROC_NODE_DEVICE_NUM_OF_CAPS = 116, /* autogen autogen */ + REMOTE_PROC_NODE_DEVICE_LIST_CAPS = 117, /* autogen autogen */ + REMOTE_PROC_NODE_DEVICE_DETTACH = 118, /* autogen skipgen */ + REMOTE_PROC_NODE_DEVICE_RE_ATTACH = 119, /* autogen skipgen */ + REMOTE_PROC_NODE_DEVICE_RESET = 120, /* autogen skipgen */ + + REMOTE_PROC_DOMAIN_GET_SECURITY_LABEL = 121, /* skipgen skipgen */ + REMOTE_PROC_NODE_GET_SECURITY_MODEL = 122, /* skipgen skipgen */ + REMOTE_PROC_NODE_DEVICE_CREATE_XML = 123, /* autogen autogen */ + REMOTE_PROC_NODE_DEVICE_DESTROY = 124, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_CREATE_XML_FROM = 125, /* autogen autogen */ + REMOTE_PROC_NUM_OF_INTERFACES = 126, /* autogen autogen */ + REMOTE_PROC_LIST_INTERFACES = 127, /* autogen autogen */ + REMOTE_PROC_INTERFACE_LOOKUP_BY_NAME = 128, /* autogen autogen */ + REMOTE_PROC_INTERFACE_LOOKUP_BY_MAC_STRING = 129, /* autogen autogen */ + REMOTE_PROC_INTERFACE_GET_XML_DESC = 130, /* autogen autogen */ + + REMOTE_PROC_INTERFACE_DEFINE_XML = 131, /* autogen autogen */ + REMOTE_PROC_INTERFACE_UNDEFINE = 132, /* autogen autogen */ + REMOTE_PROC_INTERFACE_CREATE = 133, /* autogen autogen */ + REMOTE_PROC_INTERFACE_DESTROY = 134, /* autogen autogen */ + REMOTE_PROC_DOMAIN_XML_FROM_NATIVE = 135, /* autogen autogen */ + REMOTE_PROC_DOMAIN_XML_TO_NATIVE = 136, /* autogen autogen */ + REMOTE_PROC_NUM_OF_DEFINED_INTERFACES = 137, /* autogen autogen */ + REMOTE_PROC_LIST_DEFINED_INTERFACES = 138, /* autogen autogen */ + REMOTE_PROC_NUM_OF_SECRETS = 139, /* autogen autogen */ + REMOTE_PROC_LIST_SECRETS = 140, /* autogen autogen */ + + REMOTE_PROC_SECRET_LOOKUP_BY_UUID = 141, /* autogen autogen */ + REMOTE_PROC_SECRET_DEFINE_XML = 142, /* autogen autogen */ + REMOTE_PROC_SECRET_GET_XML_DESC = 143, /* autogen autogen */ + REMOTE_PROC_SECRET_SET_VALUE = 144, /* autogen autogen */ + REMOTE_PROC_SECRET_GET_VALUE = 145, /* skipgen skipgen */ + REMOTE_PROC_SECRET_UNDEFINE = 146, /* autogen autogen */ + REMOTE_PROC_SECRET_LOOKUP_BY_USAGE = 147, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MIGRATE_PREPARE_TUNNEL = 148, /* skipgen skipgen */ + REMOTE_PROC_IS_SECURE = 149, /* autogen skipgen */ + REMOTE_PROC_DOMAIN_IS_ACTIVE = 150, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_IS_PERSISTENT = 151, /* autogen autogen */ + REMOTE_PROC_NETWORK_IS_ACTIVE = 152, /* autogen autogen */ + REMOTE_PROC_NETWORK_IS_PERSISTENT = 153, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_IS_ACTIVE = 154, /* autogen autogen */ + REMOTE_PROC_STORAGE_POOL_IS_PERSISTENT = 155, /* autogen autogen */ + REMOTE_PROC_INTERFACE_IS_ACTIVE = 156, /* autogen autogen */ + REMOTE_PROC_GET_LIB_VERSION = 157, /* autogen autogen */ + REMOTE_PROC_CPU_COMPARE = 158, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MEMORY_STATS = 159, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_ATTACH_DEVICE_FLAGS = 160, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_DETACH_DEVICE_FLAGS = 161, /* autogen autogen */ + REMOTE_PROC_CPU_BASELINE = 162, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_JOB_INFO = 163, /* autogen autogen */ + REMOTE_PROC_DOMAIN_ABORT_JOB = 164, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_WIPE = 165, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MIGRATE_SET_MAX_DOWNTIME = 166, /* autogen autogen */ + REMOTE_PROC_DOMAIN_EVENTS_REGISTER_ANY = 167, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENTS_DEREGISTER_ANY = 168, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENT_REBOOT = 169, /* autogen autogen */ + REMOTE_PROC_DOMAIN_EVENT_RTC_CHANGE = 170, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_EVENT_WATCHDOG = 171, /* autogen autogen */ + REMOTE_PROC_DOMAIN_EVENT_IO_ERROR = 172, /* autogen autogen */ + REMOTE_PROC_DOMAIN_EVENT_GRAPHICS = 173, /* autogen autogen */ + REMOTE_PROC_DOMAIN_UPDATE_DEVICE_FLAGS = 174, /* autogen autogen */ + REMOTE_PROC_NWFILTER_LOOKUP_BY_NAME = 175, /* autogen autogen */ + REMOTE_PROC_NWFILTER_LOOKUP_BY_UUID = 176, /* autogen autogen */ + REMOTE_PROC_NWFILTER_GET_XML_DESC = 177, /* autogen autogen */ + REMOTE_PROC_NUM_OF_NWFILTERS = 178, /* autogen autogen */ + REMOTE_PROC_LIST_NWFILTERS = 179, /* autogen autogen */ + REMOTE_PROC_NWFILTER_DEFINE_XML = 180, /* autogen autogen */ + + REMOTE_PROC_NWFILTER_UNDEFINE = 181, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MANAGED_SAVE = 182, /* autogen autogen */ + REMOTE_PROC_DOMAIN_HAS_MANAGED_SAVE_IMAGE = 183, /* autogen autogen */ + REMOTE_PROC_DOMAIN_MANAGED_SAVE_REMOVE = 184, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML = 185, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SNAPSHOT_GET_XML_DESC = 186, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SNAPSHOT_NUM = 187, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_NAMES = 188, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SNAPSHOT_LOOKUP_BY_NAME = 189, /* autogen autogen */ + REMOTE_PROC_DOMAIN_HAS_CURRENT_SNAPSHOT = 190, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_SNAPSHOT_CURRENT = 191, /* autogen autogen */ + REMOTE_PROC_DOMAIN_REVERT_TO_SNAPSHOT = 192, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SNAPSHOT_DELETE = 193, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_BLOCK_INFO = 194, /* autogen autogen */ + REMOTE_PROC_DOMAIN_EVENT_IO_ERROR_REASON = 195, /* autogen autogen */ + REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS = 196, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_SET_MEMORY_PARAMETERS = 197, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_GET_MEMORY_PARAMETERS = 198, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS = 199, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS = 200, /* autogen autogen */ + + REMOTE_PROC_DOMAIN_OPEN_CONSOLE = 201, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_IS_UPDATED = 202, /* autogen autogen */ + REMOTE_PROC_GET_SYSINFO = 203, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SET_MEMORY_FLAGS = 204, /* autogen autogen */ + REMOTE_PROC_DOMAIN_SET_BLKIO_PARAMETERS = 205, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_GET_BLKIO_PARAMETERS = 206, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_MIGRATE_SET_MAX_SPEED = 207, /* autogen autogen */ + REMOTE_PROC_STORAGE_VOL_UPLOAD = 208, /* skipgen skipgen */ + REMOTE_PROC_STORAGE_VOL_DOWNLOAD = 209, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_INJECT_NMI = 210 /* autogen autogen */ /* * Notice how the entries are grouped in sets of 10 ? -- 1.7.0.4

2 2

[libvirt] [PATCH 00/16 v4] Implement migration v3 protocol
by Daniel P. Berrange 12 May '11

12 May '11

This is an update to http://www.redhat.com/archives/libvir-list/2011-April/msg01012.html In this update - Bug fixes from previous review - Rebase ontop of recent changes - Run tunnelled migration I/O loop in background thread to allow use of normal qemuMigrationWaitForCompletion code

3 30

[libvirt] [PATCH] build: silence clang false positive
by Eric Blake 12 May '11

12 May '11

Clang couldn't quite see that the same condition of (flags & VIR_DOMAIN_MEM_CONFIG) is used twice, such that the second block is guaranteed that def was assigned in the first block. * src/libxl/libxl_driver.c (libxlDomainSetMemoryFlags): Add a hint for clang. --- src/libxl/libxl_driver.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c index aedee97..a08732b 100644 --- a/src/libxl/libxl_driver.c +++ b/src/libxl/libxl_driver.c @@ -1549,6 +1549,8 @@ libxlDomainSetMemoryFlags(virDomainPtr dom, unsigned long memory, ret = 0; if (flags & VIR_DOMAIN_MEM_CONFIG) { + /* clang 2.9 needs an extra hint. */ + sa_assert(def); def->mem.cur_balloon = memory; ret = virDomainSaveConfig(driver->configDir, def); } -- 1.7.4.4

1 0

[libvirt] [PATCH] nwfilter: drop unused flag argument
by Eric Blake 12 May '11

12 May '11

The public API has no flags argument, so neither should the internal callback API. This simplifies the RPC generator. * src/driver.h (virDrvNWFilterDefineXML): Drop argument that does not match public API. * src/nwfilter/nwfilter_driver.c (nwfilterDefine): Likewise. * src/libvirt.c (virNWFilterDefineXML): Likewise. * daemon/remote_generator.pl: Drop special case. --- The comment in the generator was a bit off - the public API had no flags argument, just the internal callback API. daemon/remote_generator.pl | 6 ------ src/driver.h | 3 +-- src/libvirt.c | 2 +- src/nwfilter/nwfilter_driver.c | 6 +++--- 4 files changed, 5 insertions(+), 12 deletions(-) diff --git a/daemon/remote_generator.pl b/daemon/remote_generator.pl index bce6261..c53ebc8 100755 --- a/daemon/remote_generator.pl +++ b/daemon/remote_generator.pl @@ -879,12 +879,6 @@ elsif ($opt_k) { push(@args_list, "virConnectPtr conn"); } - if ($call->{ProcName} eq "NWFilterDefineXML") { - # SPECIAL: virNWFilterDefineXML has a flags parameter in the - # public API that is missing in the XDR protocol - push(@args_list, "unsigned int flags ATTRIBUTE_UNUSED"); - } - # fix priv_name for the NumOf* functions if ($priv_name eq "privateData" and !($call->{ProcName} =~ m/(Domains|DomainSnapshot)/) and diff --git a/src/driver.h b/src/driver.h index 5cd0cea..ea80701 100644 --- a/src/driver.h +++ b/src/driver.h @@ -1181,8 +1181,7 @@ typedef virNWFilterPtr const unsigned char *uuid); typedef virNWFilterPtr (*virDrvNWFilterDefineXML) (virConnectPtr conn, - const char *xmlDesc, - unsigned int flags); + const char *xmlDesc); typedef int (*virDrvNWFilterUndefine) (virNWFilterPtr nwfilter); diff --git a/src/libvirt.c b/src/libvirt.c index 0726df4..7564db0 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -12253,7 +12253,7 @@ virNWFilterDefineXML(virConnectPtr conn, const char *xmlDesc) if (conn->nwfilterDriver && conn->nwfilterDriver->defineXML) { virNWFilterPtr ret; - ret = conn->nwfilterDriver->defineXML (conn, xmlDesc, 0); + ret = conn->nwfilterDriver->defineXML (conn, xmlDesc); if (!ret) goto error; return ret; diff --git a/src/nwfilter/nwfilter_driver.c b/src/nwfilter/nwfilter_driver.c index 17af7a6..18ea752 100644 --- a/src/nwfilter/nwfilter_driver.c +++ b/src/nwfilter/nwfilter_driver.c @@ -2,7 +2,7 @@ * nwfilter_driver.c: core driver for network filter APIs * (based on storage_driver.c) * - * Copyright (C) 2006-2010 Red Hat, Inc. + * Copyright (C) 2006-2011 Red Hat, Inc. * Copyright (C) 2006-2008 Daniel P. Berrange * Copyright (C) 2010 IBM Corporation * Copyright (C) 2010 Stefan Berger @@ -327,8 +327,8 @@ nwfilterListNWFilters(virConnectPtr conn, static virNWFilterPtr nwfilterDefine(virConnectPtr conn, - const char *xml, - unsigned int flags ATTRIBUTE_UNUSED) { + const char *xml) +{ virNWFilterDriverStatePtr driver = conn->nwfilterPrivateData; virNWFilterDefPtr def; virNWFilterObjPtr nwfilter = NULL; -- 1.7.4.4

2 2

Re: [libvirt] [PATCH 3/9] add DHCP snooping support to nwfilter
by David Stevens 12 May '11

12 May '11

Stefan Berger/Watson/IBM wrote on 05/11/2011 12:20:49 PM: > > The mac chain is there for supporting multiple MAC addresses per > interface. What is the use case for having > multiple MAC address on an interface and how do I set this up in a > Linux guest for example? I don't know if Linux guests support it now, but I wanted to eliminate the unnecessary requirement from nwfilter. Most real NICs support multiple MAC addresses; failover mechanisms can make use of it (e.g., by moving a MAC address from one device to another one that already has one). But the feature in nwfilter is more generally useful since it allows a host administrator to assign a set of legal MAC addresses to a VM and the VM user can choose/use any one of them at run time. Of course, VM users may have other reasons for wanting multiple MAC addresses on the same interface; the real point is that there's no technical reason to restrict it within nwfilter. > I am not sure whether we should remove a chain, i.e., the 'arp' > chain here. Adding is ok. Maybe the existing chain 'arp' could be > doing one part and 'arpmac' the other ? I renamed it to make it clearer what fields specifically each is checking for ARP. If you're concerned about compatibility with existing filters, we could either leave "arp" as an empty stub, or put one or the other of arpip or arpmac under that name. But this, as with the "drop" policy change, I think comes down to my belief that administrators have to revisit existing custom filters if we make any change whatsoever to the set in examples. So, I made that set self-consistent, but any filters that rely on changing any of them need to be reworked for any change. Independent custom filters aren't affected, of course. > > Can you run a VM and do a 'ebtables -t nat -L' and post the output. > I'd be curious how > the chains look like now with the 'clean-traffic' filter without > having to apply the > patches and test them. <two stages -- before DHCP ACK and after below> Bridge table: nat Bridge chain: PREROUTING, entries: 1, policy: ACCEPT -i vnet0 -j libvirt-I-vnet0 Bridge chain: OUTPUT, entries: 0, policy: ACCEPT Bridge chain: POSTROUTING, entries: 1, policy: ACCEPT -o vnet0 -j libvirt-O-vnet0 Bridge chain: libvirt-I-vnet0, entries: 9, policy: ACCEPT -j I-vnet0-mac -p IPv4 -j I-vnet0-ipv4 -p ARP -j I-vnet0-arpmac -p ARP -j I-vnet0-arpip -p 0x8035 -j I-vnet0-rarp -p 0x835 -j ACCEPT -p IPv4 -j ACCEPT -p ARP -j ACCEPT -j DROP Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT -p IPv4 -j O-vnet0-ipv4 -p 0x8035 -j O-vnet0-rarp -p IPv4 -j ACCEPT -p ARP -j ACCEPT -j DROP Bridge chain: I-vnet0-mac, entries: 1, policy: DROP -s 54:0:0:0:0:1 -j RETURN Bridge chain: I-vnet0-ipv4, entries: 1, policy: DROP -p IPv4 --ip-src 0.0.0.0 --ip-proto udp --ip-sport 68 -j RETURN Bridge chain: O-vnet0-ipv4, entries: 1, policy: DROP -j ACCEPT Bridge chain: I-vnet0-arpmac, entries: 1, policy: DROP -p ARP --arp-mac-src 54:0:0:0:0:1 -j RETURN Bridge chain: I-vnet0-arpip, entries: 1, policy: DROP -p ARP --arp-ip-src 0.0.0.0 -j RETURN Bridge chain: I-vnet0-rarp, entries: 1, policy: DROP -p 0x8035 -s 54:0:0:0:0:1 -d Broadcast --arp-op Request_Reverse --arp-ip-src 0.0.0.0 --arp-ip-dst 0.0.0.0 --arp-mac-src 54:0:0:0:0:1 --arp-mac-dst 54:0:0:0:0:1 -j ACCEPT Bridge chain: O-vnet0-rarp, entries: 1, policy: DROP -p 0x8035 -d Broadcast --arp-op Request_Reverse --arp-ip-src 0.0.0.0 --arp-ip-dst 0.0.0.0 --arp-mac-src 54:0:0:0:0:1 --arp-mac-dst 54:0:0:0:0:1 -j ACCEPT [after DHCP ACK] Bridge table: nat Bridge chain: PREROUTING, entries: 1, policy: ACCEPT -i vnet0 -j libvirt-I-vnet0 Bridge chain: OUTPUT, entries: 0, policy: ACCEPT Bridge chain: POSTROUTING, entries: 1, policy: ACCEPT -o vnet0 -j libvirt-O-vnet0 Bridge chain: libvirt-I-vnet0, entries: 9, policy: ACCEPT -j I-vnet0-mac -p IPv4 -j I-vnet0-ipv4 -p ARP -j I-vnet0-arpmac -p ARP -j I-vnet0-arpip -p 0x8035 -j I-vnet0-rarp -p 0x835 -j ACCEPT -p IPv4 -j ACCEPT -p ARP -j ACCEPT -j DROP Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT -p IPv4 -j O-vnet0-ipv4 -p 0x8035 -j O-vnet0-rarp -p IPv4 -j ACCEPT -p ARP -j ACCEPT -j DROP Bridge chain: I-vnet0-mac, entries: 1, policy: DROP -s 54:0:0:0:0:1 -j RETURN Bridge chain: I-vnet0-ipv4, entries: 2, policy: DROP -p IPv4 --ip-src 0.0.0.0 --ip-proto udp --ip-sport 68 -j RETURN -p IPv4 --ip-src 10.0.0.1 -j RETURN Bridge chain: O-vnet0-ipv4, entries: 1, policy: DROP -j ACCEPT Bridge chain: I-vnet0-arpmac, entries: 1, policy: DROP -p ARP --arp-mac-src 54:0:0:0:0:1 -j RETURN Bridge chain: I-vnet0-arpip, entries: 2, policy: DROP -p ARP --arp-ip-src 0.0.0.0 -j RETURN -p ARP --arp-ip-src 10.0.0.1 -j RETURN Bridge chain: I-vnet0-rarp, entries: 1, policy: DROP -p 0x8035 -s 54:0:0:0:0:1 -d Broadcast --arp-op Request_Reverse --arp-ip-src 0.0.0.0 --arp-ip-dst 0.0.0.0 --arp-mac-src 54:0:0:0:0:1 --arp-mac-dst 54:0:0:0:0:1 -j ACCEPT Bridge chain: O-vnet0-rarp, entries: 1, policy: DROP -p 0x8035 -d Broadcast --arp-op Request_Reverse --arp-ip-src 0.0.0.0 --arp-ip-dst 0.0.0.0 --arp-mac-src 54:0:0:0:0:1 --arp-mac-dst 54:0:0:0:0:1 -j ACCEPT thanks, +-DLS

2 1

Re: [libvirt] [PATCH 4/9] add DHCP snooping support to nwfilter
by David Stevens 12 May '11

12 May '11

Stefan Berger/Watson/IBM wrote on 05/11/2011 12:32:41 PM: > > So now this command puts the default policy of every ebtables chain > to end with an implicit drop. What if I had previously > created a filter assuming an implicit accept, which is the current > behavior? Now that filter wouldn't work correctly anymore > since my packets all get droped. Is this change really necessary? Well, all of the generated chains need this (to support multiple address matching). This can, of course, be done by adding a "-j DROP" at the end of every chain. But since it is all of them, I thought changing the default and having fewer rules made a lot more sense. So, it isn't a requirement, but any modifications to these chains will need to account for either a DROP policy explicitly or a "-j DROP" at the end, if it's modifying an existing filter. I don't see any way around custom filters needing to be reviewed and adapted to any change in the examples set. Independent filters can explicitly use "-j DROP" or "-j ACCEPT" and not rely on the policy, but insertions in existing filters can't insert after a "-j DROP" and still work, either. With the changed policy, they can append rules and possibly still work without modification. +-DLS

1 0