- Devel - libvirt List Archives

[libvirt] FYI: migration test script for TCK
by Daniel P. Berrange 29 Jun '11

29 Jun '11

I just added a new test case to the libvirt TCK for validating QEMU migration. http://libvirt.org/git/?p=libvirt-tck.git;a=commitdiff;h=f74faf2d8c83538dcd… It tests 96 different scenarios for successful migration, made up of: - Three different control/communication methods 1. Normal 2. Peer2peer 3. Peer2peer + tunnelled - 8 Different scenarios of persistent vs transient guests 1. Transient running source, no dest 2. Transient running source, persistent inactive dest 3. Persistent running source, no dest 4. Persistent running source, persistent inactive dest 5. Transient paused source, no dest 6. Transient paused source, persistent inactive dest 7. Persistent paused source, no dest 8. Persistent paused source, persistent inactive dest - With each scenario there are upto 4 flag combinations affecting persistent/transient state 1. No flags 2. UNDEFINE_SOURCE 3. PERSIST 4. UNDEFINE_SOURCE|PERSIST This gives 96 major functional test cases. On each test case we validate 10 conditions, giving a total of 960 tests results Since 0.9.2 introduced a migration v3 protocol, full test coverage also requires validating the different combinations of libvirt client, source libvirtd and destination libvirtd protocol support. This implies re-running the overall test script 8 times 1. client < 0.9.2, source < 0.9.2, target < 0.9.2 2. client >= 0.9.2, source < 0.9.2, target < 0.9.2 3. client < 0.9.2, source >= 0.9.2, target < 0.9.2 4. client < 0.9.2, source < 0.9.2, target >= 0.9.2 5. client >= 0.9.2, source >= 0.9.2, target < 0.9.2 6. client >= 0.9.2, source < 0.9.2, target >= 0.9.2 7. client < 0.9.2, source >= 0.9.2, target >= 0.9.2 8. client >= 0.9.2, source >= 0.9.2, target >= 0.9.2 Finally, this is only testing successful migration cases. We ought to have another test which validates recovery from a variety of common migration failure scenarios. This would add another few 1000 test scenarios :-) NB, in libvirt < 0.9.2 there was a bug with handling the migration of VMs which were initially PAUSED with p2p migration which causes failures. libvirt >= 0.9.2 should have a 100% success rate. Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt] [PATCH] build: fix build --without-remote
by Eric Blake 29 Jun '11

29 Jun '11

When configured --without-remote, the files remote_protocol.[ch] are not built by src/Makefile, but are still used by daemon/Makefile. The solution is to copy the implicit rule. * daemon/Makefile.am (%protocol.c, %protocol.h): Copy from src. --- Not quite trivial enough to claim the build-breaker rule. daemon/Makefile.am | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/daemon/Makefile.am b/daemon/Makefile.am index 8ed29b8..cb3caa2 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -52,6 +52,14 @@ $(srcdir)/qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \ $(AM_V_GEN)perl -w $(srcdir)/../src/rpc/gendispatch.pl -b qemu \ $(QEMU_PROTOCOL) > $@ +%protocol.c: %protocol.x %protocol.h $(srcdir)/../src/rpc/genprotocol.pl + $(AM_V_GEN)perl -w $(srcdir)/../src/rpc/genprotocol.pl $(RPCGEN) -c \ + $< $@ + +%protocol.h: %protocol.x $(srcdir)/../src/rpc/genprotocol.pl + $(AM_V_GEN)perl -w $(srcdir)/../src/rpc/genprotocol.pl $(RPCGEN) -h \ + $< $@ + if WITH_LIBVIRTD man8_MANS = libvirtd.8 -- 1.7.4.4

2 2

[libvirt] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.2.7 release
by Daniel P. Berrange 29 Jun '11

29 Jun '11

I am happy to announce a new release of the libvirt Perl bindings, Sys::Virt 0.2.7 is available for download: http://search.cpan.org/CPAN/authors/id/D/DA/DANBERR/Sys-Virt-0.2.7.tar.gz Changes in this release - Honour flags parameter when dumping XML - Use thread local error APIs exclusively - Fix bogus extra URI parameter in migrate_to_uri function - Implement all virStream APIs in Sys::Virt::Stream - Impement virDomainGetSysinfo binding - Call virInitialize when loading module - Add all missing error constants - Update example RPM spec to match Fedora - Requires libvirt >= 0.8.8 The permanent link for the Sys::Virt package, where all historic releases can be found, is http://search.cpan.org/dist/Sys-Virt/ Thanks to everyone who contributed to this release through testing, bug reporting, patch submission, etc Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[libvirt] libvirt-php login issue to ESXi
by Koen Calliauw 29 Jun '11

29 Jun '11

Hi all, I've started playing with libvirt-php yesterday and with the help of Michal Novotny got it running quite painlessly. However, the login from PHP to my testing ESXi server seems to be failing. I've wiresharked the HTTP traffic with a virsh -c (which works) and compared that to the traffic I see when using the libvirt-php extension, here's the difference I see (mind the username) Not working (libvirt-php) <Login xmlns="urn:vim25"><_this xmlns="urn:vim25" xsi:type="ManagedObjectReference" type="SessionManager">ha-sessionmgr</_this><userName xmlns="urn:vim25" xsi:type="xsd:string">root8.</userName><password xmlns="urn:vim25" xsi:type="xsd:string">fakepass</password></Login> Working (virsh -c) <Login xmlns="urn:vim25"><_this xmlns="urn:vim25" xsi:type="ManagedObjectReference" type="SessionManager">ha-sessionmgr</_this><userName xmlns="urn:vim25" xsi:type="xsd:string">root</userName><password xmlns="urn:vim25" xsi:type="xsd:string">fakepass</password></Login> So for some reason something gets appended (8.) or encoded wrong or something when I use the PHP extension. This is the testing code I run: <?php $credentials = array(VIR_CRED_AUTHNAME=>'root',VIR_CRED_PASSPHRASE=>'fakepass'); $conn = libvirt_connect("esx://10.9.0.2?transport=http", FALSE, $credentials); if($conn) { print_r(libvirt_connect_get_hypervisor($conn)); } else { echo "Connection failed: ".libvirt_get_last_error(); } Any help with this issue would be greatly appreciated. Thanks! Best regards, Koen Calliauw

2 9

[libvirt] [PATCH] virDomainEventCallbackListAddID: allow different domains to register lifecycle events
by boettcher＠tudos.org 29 Jun '11

29 Jun '11

Hello, I had trouble of registering an VIR_DOMAIN_EVENT_ID_LIFECYLCE event for different domains separately. First I invoke [0] with one domain, and later with another one. For the second call the operation will be denied by "libvir: error : internal error event callback already tracked". I assume this should be possible for different domains to register LIFECYLCE handler separately. In that case please consider the attached patch. Thanks, Alex B. [0] virConnectDomainEventRegisterAny( conn, domX, VIR_DOM_EVENT_ID_LIFECYLCE, VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback2), strdup("callback 2"), myFreeFunc);

1 0

[libvirt] [PATCH] screenshot: Set access rights to temporary file
by Michal Privoznik 29 Jun '11

29 Jun '11

Although we create a temporary file, it is owned by root:root and have rights 0600. In case qemu does not run under root, it is unable to write to that file and thus we transfer 0B sized file. --- src/qemu/qemu_driver.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 8b65c26..562ec42 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -2729,6 +2729,8 @@ qemuDomainScreenshot(virDomainPtr dom, goto endjob; } + virSecurityManagerSetSavedStateLabel(qemu_driver->securityManager, vm, tmp); + qemuDomainObjEnterMonitor(vm); if (qemuMonitorScreendump(priv->mon, tmp) < 0) { qemuDomainObjExitMonitor(vm); -- 1.7.5.rc3

2 2

[libvirt] [PATCH] dnsmasq: Fix errno handling and don't unlink non-existing files
by Matthias Bolte 29 Jun '11

29 Jun '11

addnhostsSave and hostsfileSave expect < 0 return value on error from addnhostsWrite and hostsfileWrite but then pass err instead of -err to virReportSystemError that expects an errno value. Also addnhostsWrite returns -ENOMEM and errno, change this to -errno. addnhostsWrite and hostsfileWrite tried to unlink the tempfile after renaming it, making both fail on the final step. Remove the unnecessary unlink calls. --- src/util/dnsmasq.c | 44 +++++++++++++++----------------------------- 1 files changed, 15 insertions(+), 29 deletions(-) diff --git a/src/util/dnsmasq.c b/src/util/dnsmasq.c index 5baa34f..aadca10 100644 --- a/src/util/dnsmasq.c +++ b/src/util/dnsmasq.c @@ -185,14 +185,14 @@ addnhostsWrite(const char *path, if (!(f = fopen(tmp, "w"))) { istmp = false; if (!(f = fopen(path, "w"))) { - rc = errno; + rc = -errno; goto cleanup; } } for (i = 0; i < nhosts; i++) { if (fputs(hosts[i].ip, f) == EOF || fputc('\t', f) == EOF) { - rc = errno; + rc = -errno; VIR_FORCE_FCLOSE(f); if (istmp) @@ -203,7 +203,7 @@ addnhostsWrite(const char *path, for (ii = 0; ii < hosts[i].nhostnames; ii++) { if (fputs(hosts[i].hostnames[ii], f) == EOF || fputc('\t', f) == EOF) { - rc = errno; + rc = -errno; VIR_FORCE_FCLOSE(f); if (istmp) @@ -214,7 +214,7 @@ addnhostsWrite(const char *path, } if (fputc('\n', f) == EOF) { - rc = errno; + rc = -errno; VIR_FORCE_FCLOSE(f); if (istmp) @@ -225,21 +225,14 @@ addnhostsWrite(const char *path, } if (VIR_FCLOSE(f) == EOF) { - rc = errno; + rc = -errno; goto cleanup; } - if (istmp) { - if (rename(tmp, path) < 0) { - rc = errno; - unlink(tmp); - goto cleanup; - } - - if (unlink(tmp) < 0) { - rc = errno; - goto cleanup; - } + if (istmp && rename(tmp, path) < 0) { + rc = -errno; + unlink(tmp); + goto cleanup; } cleanup: @@ -255,7 +248,7 @@ addnhostsSave(dnsmasqAddnHostsfile *addnhostsfile) addnhostsfile->nhosts); if (err < 0) { - virReportSystemError(err, _("cannot write config file '%s'"), + virReportSystemError(-err, _("cannot write config file '%s'"), addnhostsfile->path); return -1; } @@ -402,17 +395,10 @@ hostsfileWrite(const char *path, goto cleanup; } - if (istmp) { - if (rename(tmp, path) < 0) { - rc = -errno; - unlink(tmp); - goto cleanup; - } - - if (unlink(tmp) < 0) { - rc = -errno; - goto cleanup; - } + if (istmp && rename(tmp, path) < 0) { + rc = -errno; + unlink(tmp); + goto cleanup; } cleanup: @@ -428,7 +414,7 @@ hostsfileSave(dnsmasqHostsfile *hostsfile) hostsfile->nhosts); if (err < 0) { - virReportSystemError(err, _("cannot write config file '%s'"), + virReportSystemError(-err, _("cannot write config file '%s'"), hostsfile->path); return -1; } -- 1.7.0.4

2 2

[libvirt] [PATCH 0/9] Misc bug fixes to new RPC code
by Daniel P. Berrange 29 Jun '11

29 Jun '11

This is a series of bug fixes to the new RPC code I have done since I posted the original series, which is now merged. Most of these fixes relate to handling of I/O streams. Patches 1 and 9 also impacted the original code prior to the RPC rewrite, and should be backported by people maintaining old branches

2 20

[libvirt] [PATCH] maint: improve makefile whitespace
by Eric Blake 29 Jun '11

29 Jun '11

None of these instances cause any semantic differences, but consistency is nice. * src/Makefile.am: Replace leading spaces with tabs. --- Pushing under the trivial rule. src/Makefile.am | 26 +++++++++++++------------- 1 files changed, 13 insertions(+), 13 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index 7fbbb3f..8f99cc2 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -299,13 +299,13 @@ VMWARE_DRIVER_SOURCES = \ vmware/vmware_conf.c vmware/vmware_conf.h VBOX_DRIVER_SOURCES = \ - vbox/vbox_glue.c vbox/vbox_glue.h \ - vbox/vbox_driver.c vbox/vbox_driver.h \ - vbox/vbox_V2_2.c vbox/vbox_CAPI_v2_2.h \ - vbox/vbox_V3_0.c vbox/vbox_CAPI_v3_0.h \ - vbox/vbox_V3_1.c vbox/vbox_CAPI_v3_1.h \ - vbox/vbox_V3_2.c vbox/vbox_CAPI_v3_2.h \ - vbox/vbox_V4_0.c vbox/vbox_CAPI_v4_0.h + vbox/vbox_glue.c vbox/vbox_glue.h \ + vbox/vbox_driver.c vbox/vbox_driver.h \ + vbox/vbox_V2_2.c vbox/vbox_CAPI_v2_2.h \ + vbox/vbox_V3_0.c vbox/vbox_CAPI_v3_0.h \ + vbox/vbox_V3_1.c vbox/vbox_CAPI_v3_1.h \ + vbox/vbox_V3_2.c vbox/vbox_CAPI_v3_2.h \ + vbox/vbox_V4_0.c vbox/vbox_CAPI_v4_0.h VBOX_DRIVER_EXTRA_DIST = \ vbox/vbox_tmpl.c vbox/README \ @@ -576,7 +576,7 @@ endif WITH_REMOTE %protocol.h: %protocol.x $(srcdir)/rpc/genprotocol.pl $(AM_V_GEN)perl -w $(srcdir)/rpc/genprotocol.pl $(RPCGEN) -h \ - $< $@ + $< $@ if WITH_XEN if WITH_DRIVER_MODULES @@ -1144,8 +1144,8 @@ libvirt_qemu.def: $(srcdir)/libvirt_qemu.syms # Empty source list - it merely links a bunch of convenience libs together libvirt_la_SOURCES = libvirt_la_LDFLAGS = $(VERSION_SCRIPT_FLAGS)$(LIBVIRT_SYMBOL_FILE) \ - -version-info $(LIBVIRT_VERSION_INFO) \ - $(AM_LDFLAGS) \ + -version-info $(LIBVIRT_VERSION_INFO) \ + $(AM_LDFLAGS) \ $(CYGWIN_EXTRA_LDFLAGS) $(MINGW_EXTRA_LDFLAGS) libvirt_la_BUILT_LIBADD += ../gnulib/lib/libgnu.la libvirt_la_LIBADD += $(LIBXML_LIBS) \ @@ -1178,8 +1178,8 @@ libvirt_test_la_CFLAGS = $(AM_CFLAGS) libvirt_qemu_la_SOURCES = libvirt-qemu.c libvirt_qemu_la_LDFLAGS = $(VERSION_SCRIPT_FLAGS)$(LIBVIRT_QEMU_SYMBOL_FILE) \ - -version-info $(LIBVIRT_VERSION_INFO) \ - $(CYGWIN_EXTRA_LDFLAGS) $(MINGW_EXTRA_LDFLAGS) \ + -version-info $(LIBVIRT_VERSION_INFO) \ + $(CYGWIN_EXTRA_LDFLAGS) $(MINGW_EXTRA_LDFLAGS) \ $(AM_LDFLAGS) libvirt_qemu_la_CFLAGS = $(AM_CFLAGS) libvirt_qemu_la_LIBADD = libvirt.la $(CYGWIN_EXTRA_LIBADD) @@ -1407,7 +1407,7 @@ if WITH_NETWORK $(DESTDIR)$(sysconfdir)/libvirt/qemu/networks/default.xml && \ rm $(DESTDIR)$(sysconfdir)/libvirt/qemu/networks/default.xml.t; } test -e $(DESTDIR)$(sysconfdir)/libvirt/qemu/networks/autostart/default.xml || \ - ln -s ../default.xml \ + ln -s ../default.xml \ $(DESTDIR)$(sysconfdir)/libvirt/qemu/networks/autostart/default.xml endif -- 1.7.4.4

1 0

[libvirt] [PATCH] tests: Fix memory leak in virnetmessagetest
by Osier Yang 29 Jun '11

29 Jun '11

Detected when playing with "make -C tests valgrind". --- tests/virnetmessagetest.c | 35 ++++++++++++++++++++++++----------- 1 files changed, 24 insertions(+), 11 deletions(-) diff --git a/tests/virnetmessagetest.c b/tests/virnetmessagetest.c index e707b67..61f457c 100644 --- a/tests/virnetmessagetest.c +++ b/tests/virnetmessagetest.c @@ -167,6 +167,7 @@ static int testMessagePayloadEncode(const void *args ATTRIBUTE_UNUSED) { virNetMessageError err; static virNetMessage msg; + int ret = -1; static const char expect[] = { 0x00, 0x00, 0x00, 0x74, /* Length */ 0x11, 0x22, 0x33, 0x44, /* Program */ @@ -204,19 +205,21 @@ static int testMessagePayloadEncode(const void *args ATTRIBUTE_UNUSED) err.code = VIR_ERR_INTERNAL_ERROR; err.domain = VIR_FROM_RPC; + err.level = VIR_ERR_ERROR; + if (VIR_ALLOC(err.message) < 0) - return -1; + goto cleanup; *err.message = strdup("Hello World"); - err.level = VIR_ERR_ERROR; if (VIR_ALLOC(err.str1) < 0) - return -1; + goto cleanup; *err.str1 = strdup("One"); if (VIR_ALLOC(err.str2) < 0) - return -1; + goto cleanup; *err.str2 = strdup("Two"); if (VIR_ALLOC(err.str3) < 0) - return -1; + goto cleanup; *err.str3 = strdup("Three"); + err.int1 = 1; err.int2 = 2; @@ -228,29 +231,39 @@ static int testMessagePayloadEncode(const void *args ATTRIBUTE_UNUSED) msg.header.status = VIR_NET_ERROR; if (virNetMessageEncodeHeader(&msg) < 0) - return -1; + goto cleanup; if (virNetMessageEncodePayload(&msg, (xdrproc_t)xdr_virNetMessageError, &err) < 0) - return -1; + goto cleanup; if (ARRAY_CARDINALITY(expect) != msg.bufferLength) { VIR_DEBUG("Expect message length %zu got %zu", sizeof(expect), msg.bufferLength); - return -1; + goto cleanup; } if (msg.bufferOffset != 0) { VIR_DEBUG("Expect message offset 0 got %zu", msg.bufferOffset); - return -1; + goto cleanup; } if (memcmp(expect, msg.buffer, sizeof(expect)) != 0) { virtTestDifferenceBin(stderr, expect, msg.buffer, sizeof(expect)); - return -1; - } - - return 0; + goto cleanup; + } + + ret = 0; +cleanup: + VIR_FREE(*err.message); + VIR_FREE(*err.str1); + VIR_FREE(*err.str2); + VIR_FREE(*err.str3); + VIR_FREE(err.message); + VIR_FREE(err.str1); + VIR_FREE(err.str2); + VIR_FREE(err.str3); + return ret; } static int testMessagePayloadDecode(const void *args ATTRIBUTE_UNUSED) -- 1.7.1

2 2