- Devel - libvirt List Archives

[libvirt] Virtio Ballon driver problem
by Pankaj Rawat 13 Dec '11

13 Dec '11

Hi .well I am trying to use virtioballon driver on my KVM host . I have assigned 400 MB current memory to my guest The ballon size is 600MB but when I used all the 400MB of guest the RAM of guest is not increasing. I watch the ram usage by running following command #free -m But the guest is only using memory upto 400MB after that the process is killed . I don't see the ballon driver coming into picture. It is not doing anything The ballon driver is loaded in host as well as guest DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

3 4

Re: [libvirt] macvtap support in libvirt 0.9.8
by Amit Tewari 13 Dec '11

13 Dec '11

Hi all, Please ignore my previous mail.. This is my test scenario My test environment Host os=rhel6.1 Guest os = rhel6.1 Libvirt=0.9.8 Kvm hypervisor I am creating a macvtap interface on host machine at eth0 interface #ip link show macvtap0 51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500 link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff I have made this entry in guest xml file <interface type='direct'> <mac address=1e:aa:f7:43:7e:3d'/> <source dev='eth0' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Now when I start the guest #virsh start guest It gives following message error: Failed to start domain guest error: Cannot set interface flags on 'macvtap1': Device or resource busy Please let me know what else we need to do to make macvtap work on kvm. ________________________________ From: libvir-list-bounces(a)redhat.com [mailto:libvir-list-bounces@redhat.com] On Behalf Of Amit Tewari Sent: Monday, December 12, 2011 3:22 PM To: libvir-list(a)redhat.com Subject: [libvirt] macvtap support in libvirt 0.9.8 Hi all, My test environment Host os=rhel6.1 Guest os = rhel6.1 Libvirt=0.9.8 Kvm hypervisor I am creating a macvtap interface on host machine at eth0 interface #ip link show macvtap0 51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500 link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff I have made this entry in guest xml file <interface type='direct'> <mac address=1e:aa:f7:43:7e:3d'/> <source dev='eth0' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Now when I start the guest #virsh start guest It gives following message "Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. [FAILED]" Guest eth interface does not create. what is the problem. Please let me know what else we need to do to make macvtap work on kvm. DISCLAIMER: ------------------------------------------------------------------------ ----------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . ------------------------------------------------------------------------ ----------------------------------------------- DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

2 1

[libvirt] [PATCH] docs: document <address> elements in one place
by Eric Blake 13 Dec '11

13 Dec '11

Improve the documentation of what forms a valid <address> element, since these elements appear in numerous devices. * docs/formatdomain.html.in (elementsAddress): New section. (elementsControllers, elementsUSB, elementsNICS, elementsInput) (elementsHub, elementsCharChannel, elementsSound): Refer to it. --- I went ahead and assumed Michael's SPAPR-VIO patches go in, but I was guessing on the content to use there. docs/formatdomain.html.in | 133 +++++++++++++++++++++++++++++++++------------ 1 files changed, 99 insertions(+), 34 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index f9dbcda..035b9b8 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -1404,12 +1404,87 @@ </dd> </dl> + <h4><a name="elementsAddress">Device Addresses</a></h4> + + <p> + Many devices have an optional <code><address></code> + sub-element to describe where the device is placed on the + virtual bus presented to the guest. If an address is omitted on + input, libvirt will generate an appropriate address; but an + explicit address is required if more control over layout is + required. See below for device examples including an address + element. + </p> + + <p> + Every address has a mandatory attribute <code>type</code> that + describes which bus the device is on. The choice of which + address to use for a given device is constrained in part by the + device and the architecture of the guest. For example, + a <code><disk></code> device + uses <code>type='disk'</code>, while + a <code><console></code> device would + use <code>type='pci'</code> on i686 or x86_64 guests, + or <code>type='spapr-vio'</code> on PowerPC64 pseries guests. + Each address type has further optional attributes that control + where on the bus the device will be placed: + </p> + + <dl> + <dt><code>type='pci'</code></dt> + <dd>PCI addresses have the following additional + attributes: <code>domain</code> (a 2-byte hex integer, not + currently used by qemu), <code>bus</code> (a hex value between + 0 and 0xff, inclusive), <code>slot</code> (a hex value between + 0x0 and 0x1f, inclusive), and <code>function</code> (a value + between 0 and 7, inclusive). Also available is + the <code>multifunction</code> attribute, which controls + turning on the multifunction bit for a particular + slot/function in the PCI control register + (<span class="since">since 0.9.7, requires QEMU + 0.13</span>). <code>multifunction</code> defaults to 'off', + but should be set to 'on' for function 0 of a slot that will + have multiple functions used. + </dd> + <dt><code>type='drive'</code></dt> + <dd>Drive addresses have the following additional + attributes: <code>controller</code> (a 2-digit controller + number), <code>bus</code> (a 2-digit bus number), + and <code>unit</code> (a 2-digit unit number on the bus). + </dd> + <dt><code>type='virtio-serial'</code></dt> + <dd>Each virtio-serial address has the following additional + attributes: <code>controller</code> (a 2-digit controller + number), <code>bus</code> (a 2-digit bus number), + and <code>slot</code> (a 2-digit slot within the bus). + </dd> + <dt><code>type='ccid'</code></dt> + <dd>A CCID address, for smart-cards, has the following + additional attributes: <code>bus</code> (a 2-digit bus + number), and <code>slot</code> attribute (a 2-digit slot + within the bus). <span class="since">Since 0.8.8.</span> + <dt><code>type='usb'</code></dt> + <dd>USB addresses have the following additional + attributes: <code>bus</code> (a hex value between 0 and 0xfff, + inclusive), and <code>port</code> (a dotted notation of up to + four octets, such as 1.2 or 2.1.3.1). + </dd> + <dt><code>type='spapr-vio'</code></dt> + <dd>On PowerPC guests, devices are assigned on the SPAPR-VIO + bus, which is a flat 64-bit address space, where each address + should be aligned on a multiple of 0x1000. Each address has + the following additional attribute: <code>reg</code> (the hex + value address of the starting + register). <span class="since">Since 0.9.9.</span> + </dd> + </dl> + <h4><a name="elementsControllers">Controllers</a></h4> <p> - Many devices that have an <code><address></code> - sub-element are designed to work with a controller to manage - related devices. Normally, libvirt can automatically infer such + Depending on the guest architecture, some device busses can + appear more than once, with a group of virtual devices tied to a + virtual controller. Normally, libvirt can automatically infer such controllers without requiring explicit XML markup, but sometimes it is necessary to provide an explicit controller element. </p> @@ -1443,15 +1518,15 @@ A "usb" controller has an optional attribute <code>model</code>, which is one of "piix3-uhci", "piix4-uhci", "ehci", "ich9-ehci1", "ich9-uhci1", "ich9-uhci2", "ich9-uhci3", - "vt82c686b-uhci" or "pci-ohci". + "vt82c686b-uhci" or "pci-ohci". The PowerPC64 "spapr-vio" + addresses do not have an associated controller. </p> <p> For controllers that are themselves devices on a PCI or USB bus, an optional sub-element <code><address></code> can specify the exact relationship of the controller to its master bus, with - semantics like any other device's <code>address</code> - sub-element. + semantics <a href="#elementsAddress">given above</a>. </p> <p> @@ -1608,19 +1683,9 @@ (starting with 0x) or octal (starting with 0) form. For PCI devices the element carries 3 attributes allowing to designate the device as can be found with the <code>lspci</code> or - with <code>virsh nodedev-list</code>. The - <code>bus</code> attribute allows the hexadecimal values 0 to ff, the - <code>slot</code> attribute allows the hexadecimal values 0 to 1f, and - the <code>function</code> attribute allows the hexadecimal values 0 to 7. - The <code>multifunction</code> attribute controls turning on the - multifunction bit for a particular slot/function in the PCI - control register<span class="since">since 0.9.7, requires QEMU - 0.13</span>. <code>multifunction</code> defaults to 'off', but - should be set to 'on' for function 0 of a slot that will have - multiple functions used. - There is also an optional <code>domain</code> attribute for - the PCI domain, with hexadecimal values 0 to ffff, but it is - currently not used by qemu.</dd> + with <code>virsh + nodedev-list</code>. <a href="elementsAddress">See above</a> for + more details on the address element. </dl> <h4><a name="elementsRedir">Redirected devices</a></h4> @@ -1756,12 +1821,9 @@ <p> Each mode supports an optional sub-element <code><address></code>, which fine-tunes the - correlation between the smartcard and a ccid bus controller. - If present, the element must have an attribute - of <code>type='ccid'</code> as well as a <code>bus</code> - attribute listing the index of the bus that the smartcard - utilizes. An optional <code>slot</code> attribute lists which - slot within the bus. For now, qemu only supports at most one + correlation between the smartcard and a ccid bus + controller, <a href="#elementsAddress">documented above</a>. + For now, qemu only supports at most one smartcard, with an address of bus=0 slot=0. </p> @@ -1786,10 +1848,8 @@ each <code><interface></code> element has an optional <code><address></code> sub-element that can tie the interface to a particular pci slot, with - attribute <code>type='pci'</code> and additional - attributes <code>domain</code>, <code>bus</code>, <code>slot</code>, - <code>function</code>, and <code>multifunction</code> - <span class="since">since 0.9.7, requires QEMU 0.13</span> as appropriate. + attribute <code>type='pci'</code> + as <a href="#elementsAddress">documented above</a>. </p> <h5><a name="elementsNICSVirtual">Virtual network</a></h5> @@ -2387,7 +2447,8 @@ qemu-kvm -net nic,model=? /dev/null <p> The <code>input</code> element has an optional sub-element <code><address></code> which can tie the - device to a particular PCI slot. + device to a particular PCI + slot, <a href="#elementsAddress">documented above</a>. </p> <h4><a name="elementsHub">Hub devices</a></h4> @@ -2413,8 +2474,10 @@ qemu-kvm -net nic,model=? /dev/null <p> The <code>hub</code> element has an optional - sub-element <code><address></code> which can tie the - device to a particular controller. + sub-element <code><address></code> + with <code>type='usb'</code>which can tie the device to a + particular controller, <a href="#elementsAddress">documented + above</a>. </p> <h4><a name="elementsGraphics">Graphical framebuffers</a></h4> @@ -2876,7 +2939,8 @@ qemu-kvm -net nic,model=? /dev/null /dev/virtio-ports/$name (for more info, please see <a href="http://fedoraproject.org/wiki/Features/VirtioSerial">http://fedoraproject.org/wiki/Features/VirtioSerial</a>). The optional element <code>address</code> can tie the channel to a - particular <code>type='virtio-serial'</code> controller. + particular <code>type='virtio-serial'</code> + controller, <a href="#elementsAddress">documented above</a>. <span class="since">Since 0.7.7</span></dd> <dt><code>spicevmc</code></dt> @@ -3152,7 +3216,8 @@ qemu-kvm -net nic,model=? /dev/null <p> Each <code>sound</code> element has an optional sub-element <code><address></code> which can tie the - device to a particular PCI slot. + device to a particular PCI + slot, <a href="#elementsAddress">documented above</a>. </p> <h4><a name="elementsWatchdog">Watchdog device</a></h4> -- 1.7.7.3

3 4

[libvirt] [PATCH]add a qemu-specific event register API, to passthough the new events come from qemu
by ShaoHe Feng 13 Dec '11

13 Dec '11

Basically, this feature can go along with qemu monitor passthrough. That way, if we use new commands in the monitor that generate new events, we want some way to receive those new events too. In order to test this patch, see the attached python test case. When domains are started, it will be able to catch RESUME events. and the attached 0002-for-testing-the-new-qemu-specific-regiater-API.patch is used to test the c code API. # ./tools/virsh -c qemu:///system virsh # register-event RESUME virsh # start domain Signed-off-by: Shao He Feng <shaohef(a)linux.vnet.ibm.com> --- daemon/libvirtd.h | 12 +- daemon/remote.c | 195 ++++++++++++++++++- include/libvirt/libvirt-qemu.h | 11 + include/libvirt/libvirt.h.in | 17 ++- python/generator.py | 26 ++- python/libvirt-override-virConnect.py | 14 ++- python/libvirt-qemu-override.c | 140 +++++++++++++ python/libvirt-qemu-override.py | 41 ++++ src/conf/domain_event.c | 347 +++++++++++++++++++++++++++++++-- src/conf/domain_event.h | 49 +++++- src/driver.h | 14 ++ src/libvirt-qemu.c | 190 ++++++++++++++++++ src/libvirt_private.syms | 6 + src/libvirt_qemu.syms | 5 + src/qemu/qemu_driver.c | 42 ++++ src/qemu/qemu_monitor.c | 10 + src/qemu/qemu_monitor.h | 8 + src/qemu/qemu_monitor_json.c | 36 ++++ src/qemu/qemu_process.c | 24 +++ src/remote/qemu_protocol.x | 33 +++- src/remote/remote_driver.c | 153 ++++++++++++++- src/remote/remote_protocol.x | 9 +- src/remote_protocol-structs | 5 + 23 files changed, 1353 insertions(+), 34 deletions(-) mode change 100644 => 100755 python/libvirt-override-virConnect.py mode change 100644 => 100755 python/libvirt-override-virStream.py mode change 100644 => 100755 python/libvirt-override.py create mode 100644 python/libvirt-qemu-override.py diff --git a/daemon/libvirtd.h b/daemon/libvirtd.h index c8d3ca2..e3e1c40 100644 --- a/daemon/libvirtd.h +++ b/daemon/libvirtd.h @@ -38,6 +38,16 @@ # endif # include "virnetserverprogram.h" +/* limit the number unknow event of an conncet can register */ +#define VIR_DOMAIN_EVENT_NAME_LAST 512 +struct domainEventNameCallBackStatus { + /* counter the number of unknow event registered */ + int eventNameCallBackCounter; + /* Stores the ID of the unknow event registered */ + int eventNameCallback[VIR_DOMAIN_EVENT_NAME_LAST]; +}; +typedef struct domainEventNameCallBackStatus domainEventNameCallBackStatus; + typedef struct daemonClientStream daemonClientStream; typedef daemonClientStream *daemonClientStreamPtr; typedef struct daemonClientPrivate daemonClientPrivate; @@ -49,7 +59,7 @@ struct daemonClientPrivate { virMutex lock; int domainEventCallbackID[VIR_DOMAIN_EVENT_ID_LAST]; - + domainEventNameCallBackStatus domainEventNameCallBack; # if HAVE_SASL virNetSASLSessionPtr sasl; # endif diff --git a/daemon/remote.c b/daemon/remote.c index e1d208c..bc8455d 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -421,6 +421,54 @@ mem_error: return -1; } +static int remoteRelayDomainEventUnknown(virConnectPtr conn ATTRIBUTE_UNUSED, + virDomainPtr dom, + const char *eventName, /* The JSON event name */ + const char *eventArgs, /* The JSON string of args */ + void *opaque) +{ + virNetServerClientPtr client = opaque; + remote_domain_event_default_event_msg data; + + if (!client) + return -1; + + VIR_DEBUG("Relaying domain: %s id: %d, unknown event: %s arguments: %s", + dom->name, dom->id, eventName, eventArgs); + + /* build return data */ + memset(&data, 0, sizeof data); + if (eventName == NULL) + goto mem_error3; + data.eventName = (char *)strdup(eventName); + if (data.eventName == NULL) + goto mem_error2; + if (eventArgs != NULL) { + data.eventArgs = (char *)strdup(eventArgs); + if (data.eventArgs == NULL) + goto mem_error1; + } + else { + data.eventArgs = (char *)strdup("NULL"); + if (data.eventArgs == NULL) + goto mem_error1; + } + make_nonnull_domain(&data.dom, dom); + remoteDispatchDomainEventSend(client, remoteProgram, + REMOTE_PROC_QEMU_DOMAIN_EVENT_UNKNOWN_EVENT, + (xdrproc_t)xdr_remote_domain_event_default_event_msg, &data); + + return 0; + +mem_error1: + VIR_FREE(data.eventArgs); +mem_error2: + VIR_FREE(data.eventName); +mem_error3: + virReportOOMError(); + return -1; +} + static int remoteRelayDomainEventControlError(virConnectPtr conn ATTRIBUTE_UNUSED, virDomainPtr dom, @@ -509,6 +557,7 @@ static virConnectDomainEventGenericCallback domainEventCallbacks[] = { VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventControlError), VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventBlockJob), VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventDiskChange), + VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventUnknown), }; verify(ARRAY_CARDINALITY(domainEventCallbacks) == VIR_DOMAIN_EVENT_ID_LAST); @@ -526,10 +575,21 @@ static void remoteClientFreeFunc(void *data) /* Deregister event delivery callback */ if (priv->conn) { - int i; + int i, j; for (i = 0 ; i < VIR_DOMAIN_EVENT_ID_LAST ; i++) { - if (priv->domainEventCallbackID[i] != -1) { + if (i == VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN && priv->domainEventCallbackID[i] != -1) { + for (j = 0 ; j < VIR_DOMAIN_EVENT_NAME_LAST ; j++){ + if (priv->domainEventNameCallBack.eventNameCallback[j] != -1) { + VIR_DEBUG("Deregistering to relay remote events %d", i); + virConnectDomainQemuEventDeregister(priv->conn, + priv->domainEventNameCallBack.eventNameCallback[j]); + } + priv->domainEventNameCallBack.eventNameCallback[j] == -1; + } + priv->domainEventNameCallBack.eventNameCallBackCounter = 0; + } + else if (priv->domainEventCallbackID[i] != -1) { VIR_DEBUG("Deregistering to relay remote events %d", i); virConnectDomainEventDeregisterAny(priv->conn, priv->domainEventCallbackID[i]); @@ -572,6 +632,10 @@ int remoteClientInitHook(virNetServerPtr srv ATTRIBUTE_UNUSED, for (i = 0 ; i < VIR_DOMAIN_EVENT_ID_LAST ; i++) priv->domainEventCallbackID[i] = -1; + priv->domainEventNameCallBack.eventNameCallBackCounter = 0; + for (i = 0 ; i < VIR_DOMAIN_EVENT_NAME_LAST ; i++) + priv->domainEventNameCallBack.eventNameCallback[i] = -1; + virNetServerClientSetPrivateData(client, priv, remoteClientFreeFunc); virNetServerClientSetCloseHook(client, remoteClientCloseFunc); @@ -2991,6 +3055,133 @@ cleanup: } static int +qemuDispatchDomainEventsRegister(virNetServerPtr server ATTRIBUTE_UNUSED, + virNetServerClientPtr client ATTRIBUTE_UNUSED, + virNetMessagePtr msg ATTRIBUTE_UNUSED, + virNetMessageErrorPtr rerr, + qemu_domain_events_register_args *args, + qemu_domain_events_register_ret *ret ATTRIBUTE_UNUSED) +{ + int callbackID = -1; + int rv = -1; + int eventIdx = 0; + struct daemonClientPrivate *priv = + virNetServerClientGetPrivateData(client); + if (!priv->conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + virMutexLock(&priv->lock); + + if (args->eventName == NULL) { + virNetError(VIR_ERR_INTERNAL_ERROR, _("event Name is NULL")); + goto cleanup; + } + if (priv->domainEventNameCallBack.eventNameCallBackCounter >= VIR_DOMAIN_EVENT_NAME_LAST) { + virNetError(VIR_ERR_INTERNAL_ERROR, + _("domain event %s is not registered, the register number has exceeded limit number %d"), + args->eventName, + VIR_DOMAIN_EVENT_NAME_LAST); + goto cleanup; + } + + if ((callbackID = virConnectDomainQemuEventRegister(priv->conn, + NULL, + args->eventName, + (virConnectDomainQemuEventCallback)remoteRelayDomainEventUnknown, + client, + NULL)) < 0) + goto cleanup; + + for (eventIdx = 0 ; eventIdx < VIR_DOMAIN_EVENT_NAME_LAST ; eventIdx++) { + if (priv->domainEventNameCallBack.eventNameCallback[eventIdx] == -1) { + priv->domainEventNameCallBack.eventNameCallback[eventIdx] = callbackID; + priv->domainEventNameCallBack.eventNameCallBackCounter++; + ret->callbackID = eventIdx; + break; + } + } + priv->domainEventCallbackID[VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN] = callbackID; + + rv = 0; + +cleanup: + if (rv < 0) + virNetMessageSaveError(rerr); + virMutexUnlock(&priv->lock); + return rv; +} + +static int +remoteDispatchQemuDomainEventUnknownEvent(virNetServerPtr server, + virNetServerClientPtr client, + virNetMessagePtr msg, + virNetMessageErrorPtr rerr) +{ + int rv = -1; + return rv; +} + +static int +qemuDispatchDomainEventsUnknownEvent(virNetServerPtr server, + virNetServerClientPtr client, + virNetMessagePtr msg, + virNetMessageErrorPtr rerr, + qemu_domain_events_unknown_event_args *args, + qemu_domain_events_unknown_event_ret *ret) +{ + int rv = -1; + return rv; +} + +static int +qemuDispatchDomainEventsDeregister(virNetServerPtr server ATTRIBUTE_UNUSED, + virNetServerClientPtr client ATTRIBUTE_UNUSED, + virNetMessagePtr msg ATTRIBUTE_UNUSED, + virNetMessageErrorPtr rerr, + qemu_domain_events_deregister_args *args, + qemu_domain_events_deregister_ret *ret ATTRIBUTE_UNUSED) +{ + int callbackID = -1; + int rv = -1; + int eventIdx = args->callbackID; + struct daemonClientPrivate *priv = + virNetServerClientGetPrivateData(client); + + if (!priv->conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + virMutexLock(&priv->lock); + + if (eventIdx >= VIR_DOMAIN_EVENT_NAME_LAST || + (callbackID = priv->domainEventNameCallBack.eventNameCallback[eventIdx]) < 0) { + + virNetError(VIR_ERR_INTERNAL_ERROR, _("callbakcID %d is not register"), eventIdx); + goto cleanup; + } + + if (virConnectDomainQemuEventDeregister(priv->conn, callbackID) < 0) + goto cleanup; + ret->cb_deregistered = callbackID; + + priv->domainEventNameCallBack.eventNameCallback[eventIdx] = -1; + priv->domainEventNameCallBack.eventNameCallBackCounter--; + if (priv->domainEventNameCallBack.eventNameCallBackCounter == 0) + priv->domainEventCallbackID[VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN] = -1; + + rv = 0; + +cleanup: + if (rv < 0) + virNetMessageSaveError(rerr); + virMutexUnlock(&priv->lock); + return rv; +} + +static int qemuDispatchMonitorCommand(virNetServerPtr server ATTRIBUTE_UNUSED, virNetServerClientPtr client ATTRIBUTE_UNUSED, virNetMessagePtr msg ATTRIBUTE_UNUSED, diff --git a/include/libvirt/libvirt-qemu.h b/include/libvirt/libvirt-qemu.h index 7f12e4f..74efe79 100644 --- a/include/libvirt/libvirt-qemu.h +++ b/include/libvirt/libvirt-qemu.h @@ -32,6 +32,17 @@ virDomainPtr virDomainQemuAttach(virConnectPtr domain, unsigned int pid, unsigned int flags); +int +virConnectDomainQemuEventRegister(virConnectPtr conn, + virDomainPtr dom, /* option to filter */ + const char *eventName, /* JSON event name */ + virConnectDomainQemuEventCallback cb, + void *opaque, + virFreeCallback freecb); +int +virConnectDomainQemuEventDeregister(virConnectPtr conn, + int callbackID); + # ifdef __cplusplus } # endif diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index 2480add..99e1c5d 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -3207,7 +3207,21 @@ typedef void (*virConnectDomainEventBlockJobCallback)(virConnectPtr conn, int type, int status, void *opaque); - +/** + * virConnectDomainQemuEventCallback: + * @conn: connection object + * @dom: domain on which the event occurred + * @eventName : the name of the unknow or un-implementation event + * @eventArgs: the content of the unknow or un-implementation event + * + * The callback signature to use when registering for an event of type + * VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN with virConnectDomainQemuEventRegister() + */ +typedef void (*virConnectDomainQemuEventCallback)(virConnectPtr conn, + virDomainPtr dom, + const char *eventName, /* The JSON event name */ + const char *eventArgs, /* The JSON string of args */ + void *opaque); /** * virConnectDomainEventDiskChangeReason: * @@ -3263,6 +3277,7 @@ typedef enum { VIR_DOMAIN_EVENT_ID_CONTROL_ERROR = 7, /* virConnectDomainEventGenericCallback */ VIR_DOMAIN_EVENT_ID_BLOCK_JOB = 8, /* virConnectDomainEventBlockJobCallback */ VIR_DOMAIN_EVENT_ID_DISK_CHANGE = 9, /* virConnectDomainEventDiskChangeCallback */ + VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN = 10, /* virConnectDomainEventDefaultCallback */ /* * NB: this enum value will increase over time as new events are diff --git a/python/generator.py b/python/generator.py index 88c52b9..3d13622 100755 --- a/python/generator.py +++ b/python/generator.py @@ -234,6 +234,7 @@ skipped_types = { # 'int *': "usually a return type", 'virConnectDomainEventCallback': "No function types in python", 'virConnectDomainEventGenericCallback': "No function types in python", + 'virConnectDomainQemuEventCallback': "No function types in python", 'virConnectDomainEventRTCChangeCallback': "No function types in python", 'virConnectDomainEventWatchdogCallback': "No function types in python", 'virConnectDomainEventIOErrorCallback': "No function types in python", @@ -476,6 +477,8 @@ skip_function = ( qemu_skip_function = ( #"virDomainQemuAttach", + 'virConnectDomainQemuEventRegister', # overridden in libvirt_qemu_override.py + 'virConnectDomainQemuEventDeregister', # overridden in libvirt_qemu_override.py ) # Generate C code, but skip python impl @@ -1656,17 +1659,18 @@ def qemuBuildWrappers(module): if extra != None: extra.close() - fd.write("try:\n") - fd.write(" import libvirtmod_qemu\n") - fd.write("except ImportError, lib_e:\n") - fd.write(" try:\n") - fd.write(" import cygvirtmod_qemu as libvirtmod_qemu\n") - fd.write(" except ImportError, cyg_e:\n") - fd.write(" if str(cyg_e).count(\"No module named\"):\n") - fd.write(" raise lib_e\n\n") - - fd.write("import libvirt\n\n"); - fd.write("#\n# Functions from module %s\n#\n\n" % module) + if extra == None: + fd.write("try:\n") + fd.write(" import libvirtmod_qemu\n") + fd.write("except ImportError, lib_e:\n") + fd.write(" try:\n") + fd.write(" import cygvirtmod_qemu as libvirtmod_qemu\n") + fd.write(" except ImportError, cyg_e:\n") + fd.write(" if str(cyg_e).count(\"No module named\"):\n") + fd.write(" raise lib_e\n\n") + + fd.write("import libvirt\n\n"); + fd.write("#\n# Functions from module %s\n#\n\n" % module) # # Generate functions directly, no classes # diff --git a/python/libvirt-override-virConnect.py b/python/libvirt-override-virConnect.py old mode 100644 new mode 100755 index b908b32..ce34bcf --- a/python/libvirt-override-virConnect.py +++ b/python/libvirt-override-virConnect.py @@ -134,8 +134,20 @@ cb(self, virDomain(self, _obj=dom), oldSrcPath, newSrcPath, devAlias, reason, opaque) return 0; + def _dispatchDomainEventUnknownCallback(self, dom, eventName, eventArgs, cbData): + """Dispatches events to python user unknown event callbacks + """ + try: + cb = cbData["cb"] + opaque = cbData["opaque"] + + cb(self, virDomain(self, _obj=dom), eventName, eventArgs, opaque) + return 0 + except AttributeError: + pass + def domainEventDeregisterAny(self, callbackID): - """Removes a Domain Event Callback. De-registering for a + """Removes a QEMU Domain Event Callback. De-registering for a domain callback will disable delivery of this event type """ try: ret = libvirtmod.virConnectDomainEventDeregisterAny(self._o, callbackID) diff --git a/python/libvirt-override-virStream.py b/python/libvirt-override-virStream.py old mode 100644 new mode 100755 diff --git a/python/libvirt-override.py b/python/libvirt-override.py old mode 100644 new mode 100755 diff --git a/python/libvirt-qemu-override.c b/python/libvirt-qemu-override.c index 485c809..f5a8c09 100644 --- a/python/libvirt-qemu-override.c +++ b/python/libvirt-qemu-override.c @@ -18,6 +18,7 @@ #include <Python.h> #include "libvirt/libvirt-qemu.h" +#include "libvirt/libvirt.h" #include "libvirt/virterror.h" #include "typewrappers.h" #include "libvirt-qemu.h" @@ -96,6 +97,143 @@ libvirt_qemu_virDomainQemuMonitorCommand(PyObject *self ATTRIBUTE_UNUSED, return(py_retval); } +static void +libvirt_qemu_virConnectDomainEventFreeFunc(void *opaque) +{ + PyObject *pyobj_conn = (PyObject*)opaque; + LIBVIRT_ENSURE_THREAD_STATE; + Py_DECREF(pyobj_conn); + LIBVIRT_RELEASE_THREAD_STATE; +} + +static int +libvirt_qemu_virConnectDomainEventUnknownCallback(virConnectPtr conn ATTRIBUTE_UNUSED, + virDomainPtr dom, + const char *eventName, + const char *eventArgs, + void *opaque) +{ + PyObject *pyobj_cbData = (PyObject*)opaque; + PyObject *pyobj_dom; + PyObject *pyobj_ret; + PyObject *pyobj_conn; + PyObject *dictKey; + int ret = -1; + + LIBVIRT_ENSURE_THREAD_STATE; + + /* Create a python instance of this virDomainPtr */ + virDomainRef(dom); + pyobj_dom = libvirt_virDomainPtrWrap(dom); + Py_INCREF(pyobj_cbData); + + dictKey = libvirt_constcharPtrWrap("conn"); + pyobj_conn = PyDict_GetItem(pyobj_cbData, dictKey); + Py_DECREF(dictKey); + + /* Call the Callback Dispatcher */ + pyobj_ret = PyObject_CallMethod(pyobj_conn, + (char*)"_dispatchDomainEventUnknownCallback", + (char*)"OssO", + pyobj_dom, eventName, eventArgs, pyobj_cbData); + + Py_DECREF(pyobj_cbData); + Py_DECREF(pyobj_dom); + + if (!pyobj_ret) { +#if DEBUG_ERROR + printf("%s - ret:%p\n", __FUNCTION__, pyobj_ret); +#endif + PyErr_Print(); + } else { + Py_DECREF(pyobj_ret); + ret = 0; + } + + LIBVIRT_RELEASE_THREAD_STATE; + return ret; +} + +static PyObject * +libvirt_qemu_virConnectDomainQemuEventRegister(ATTRIBUTE_UNUSED PyObject * self, + PyObject * args) +{ + PyObject *py_retval; /* return value */ + PyObject *pyobj_conn; /* virConnectPtr */ + PyObject *pyobj_dom; + PyObject *pyobj_cbData; /* hash of callback data */ + char *eventName; + virConnectPtr conn; + int ret = 0; + + virConnectDomainQemuEventCallback cb = NULL; + virDomainPtr dom; + + if (!PyArg_ParseTuple + (args, (char *) "OOsO:virConnectDomainQemuEventRegister", + &pyobj_conn, &pyobj_dom, &eventName, &pyobj_cbData)) { + DEBUG("%s failed parsing tuple\n", __FUNCTION__); + return VIR_PY_INT_FAIL; + } + + if (eventName == NULL) + return VIR_PY_INT_FAIL; + + DEBUG("libvirt_qemu_virConnectDomainQemuEventRegister(%p %p %s %p) called\n", + pyobj_conn, pyobj_dom, eventName, pyobj_cbData); + conn = PyvirConnect_Get(pyobj_conn); + if (pyobj_dom == Py_None) + dom = NULL; + else + dom = PyvirDomain_Get(pyobj_dom); + + cb = (virConnectDomainQemuEventCallback)(libvirt_qemu_virConnectDomainEventUnknownCallback); + if (!cb) { + return VIR_PY_INT_FAIL; + } + + Py_INCREF(pyobj_cbData); + + LIBVIRT_BEGIN_ALLOW_THREADS; + ret = virConnectDomainQemuEventRegister(conn, dom, eventName, + cb, pyobj_cbData, + libvirt_qemu_virConnectDomainEventFreeFunc); + LIBVIRT_END_ALLOW_THREADS; + if (ret < 0) { + Py_DECREF(pyobj_cbData); + } + py_retval = libvirt_intWrap(ret); + return (py_retval); +} + +static PyObject * +libvirt_qemu_virConnectDomainQemuEventDeregister(ATTRIBUTE_UNUSED PyObject * self, + PyObject * args) +{ + PyObject *py_retval; + PyObject *pyobj_conn; + int callbackID; + virConnectPtr conn; + int ret = 0; + + if (!PyArg_ParseTuple + (args, (char *) "Oi:virConnectDomainQemuEventDeregister", + &pyobj_conn, &callbackID)) + return (NULL); + + DEBUG("libvirt_qemu_virConnectDomainQemuEventDeregister(%p) called\n", pyobj_conn); + + conn = (virConnectPtr) PyvirConnect_Get(pyobj_conn); + + LIBVIRT_BEGIN_ALLOW_THREADS; + + ret = virConnectDomainQemuEventDeregister(conn, callbackID); + + LIBVIRT_END_ALLOW_THREADS; + py_retval = libvirt_intWrap(ret); + return (py_retval); +} + /************************************************************************ * * * The registration stuff * @@ -104,6 +242,8 @@ libvirt_qemu_virDomainQemuMonitorCommand(PyObject *self ATTRIBUTE_UNUSED, static PyMethodDef libvirtQemuMethods[] = { #include "libvirt-qemu-export.c" {(char *) "virDomainQemuMonitorCommand", libvirt_qemu_virDomainQemuMonitorCommand, METH_VARARGS, NULL}, + {(char *) "virConnectDomainQemuEventRegister", libvirt_qemu_virConnectDomainQemuEventRegister, METH_VARARGS, NULL}, + {(char *) "virConnectDomainQemuEventDeregister", libvirt_qemu_virConnectDomainQemuEventDeregister, METH_VARARGS, NULL}, {NULL, NULL, 0, NULL} }; diff --git a/python/libvirt-qemu-override.py b/python/libvirt-qemu-override.py new file mode 100644 index 0000000..0f5694c --- /dev/null +++ b/python/libvirt-qemu-override.py @@ -0,0 +1,41 @@ +# +# Manually written part of python bindings for libvirt_qemu +# + +# On cygwin, the DLL is called cygvirtmod.dll +try: + import libvirtmod_qemu +except ImportError, lib_e: + try: + import cygvirtmod_qemu as libvirtmod_qemu + except ImportError, cyg_e: + if str(cyg_e).count("No module named"): + raise lib_e + +import libvirt +import types + +def domainQemuEventDeregister(conn, callbackID): + """Removes a Domain Event Callback. De-registering for a + domain callback will disable delivery of this event type """ + try: + ret = libvirtmod_qemu.virConnectDomainQemuEventDeregister(conn._o, callbackID) + if ret == -1: raise libvirt.libvirtError ('virConnectDomainQemuEventDeregister() failed', conn) + del conn.domainEventCallbackID[callbackID] + except AttributeError: + pass + +def domainQemuEventRegister(conn, dom, eventName, cb, opaque): + """Adds a Domain Event Callback. Registering for a domain + callback will enable delivery of the events """ + if not hasattr(conn, 'domainEventCallbackID'): + conn.domainEventCallbackID = {} + cbData = { "cb": cb, "conn": conn, "opaque": opaque } + if dom is None: + ret = libvirtmod_qemu.virConnectDomainQemuEventRegister(conn._o, None, eventName, cbData) + else: + ret = libvirtmod_qemu.virConnectDomainQemuEventRegister(conn._o, dom._o, eventName, cbData) + if ret == -1: + raise libvirt.libvirtError ('virConnectDomainQemuEventRegister() failed', conn) + conn.domainEventCallbackID[ret] = opaque + return ret diff --git a/src/conf/domain_event.c b/src/conf/domain_event.c index 614ab97..b6a763a 100644 --- a/src/conf/domain_event.c +++ b/src/conf/domain_event.c @@ -45,7 +45,9 @@ typedef virDomainMeta *virDomainMetaPtr; struct _virDomainEventCallback { int callbackID; + int qemuCallbackID; int eventID; + char *eventName; virConnectPtr conn; virDomainMetaPtr dom; virConnectDomainEventGenericCallback cb; @@ -94,6 +96,10 @@ struct _virDomainEvent { char *devAlias; int reason; } diskChange; + struct { + char *eventName; + char *eventArgs; + }qemuUnknownEvent; } data; }; @@ -112,6 +118,8 @@ virDomainEventCallbackListFree(virDomainEventCallbackListPtr list) for (i=0; i<list->count; i++) { virFreeCallback freecb = list->callbacks[i]->freecb; + if (list->callbacks[i]->eventName) + VIR_FREE(list->callbacks[i]->eventName); if (freecb) (*freecb)(list->callbacks[i]->opaque); VIR_FREE(list->callbacks[i]); @@ -143,7 +151,6 @@ virDomainEventCallbackListRemove(virConnectPtr conn, (*freecb)(cbList->callbacks[i]->opaque); virUnrefConnect(cbList->callbacks[i]->conn); VIR_FREE(cbList->callbacks[i]); - if (i < (cbList->count - 1)) memmove(cbList->callbacks + i, cbList->callbacks + i + 1, @@ -187,8 +194,11 @@ virDomainEventCallbackListRemoveID(virConnectPtr conn, if (freecb) (*freecb)(cbList->callbacks[i]->opaque); virUnrefConnect(cbList->callbacks[i]->conn); + if (cbList->callbacks[i]->eventID == VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN) { + if (cbList->callbacks[i]->eventName) + VIR_FREE(cbList->callbacks[i]->eventName); + } VIR_FREE(cbList->callbacks[i]); - if (i < (cbList->count - 1)) memmove(cbList->callbacks + i, cbList->callbacks + i + 1, @@ -212,6 +222,52 @@ virDomainEventCallbackListRemoveID(virConnectPtr conn, /** + * virDomainQemuEventCallbackListRemoveID: + * @conn: pointer to the connection + * @cbList: the list + * @callback: the callback to remove + * + * Internal function to remove a callback from a virDomainEventCallbackListPtr + */ +int +virDomainQemuEventCallbackListRemoveID(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID) +{ + int i; + for (i = 0 ; i < cbList->count ; i++) { + if (cbList->callbacks[i]->callbackID == callbackID && + cbList->callbacks[i]->conn == conn && + cbList->callbacks[i]->eventID == VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN) { + virFreeCallback freecb = cbList->callbacks[i]->freecb; + if (freecb) + (*freecb)(cbList->callbacks[i]->opaque); + VIR_FREE(cbList->callbacks[i]->eventName); + virUnrefConnect(cbList->callbacks[i]->conn); + VIR_FREE(cbList->callbacks[i]); + + if (i < (cbList->count - 1)) + memmove(cbList->callbacks + i, + cbList->callbacks + i + 1, + sizeof(*(cbList->callbacks)) * + (cbList->count - (i + 1))); + + if (VIR_REALLOC_N(cbList->callbacks, + cbList->count - 1) < 0) { + ; /* Failure to reduce memory allocation isn't fatal */ + } + cbList->count--; + return 0; + } + } + + eventReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("could not find event callback for removal")); + return -1; +} + + +/** * virDomainEventCallbackListRemoveConn: * @conn: pointer to the connection * @cbList: the list @@ -231,8 +287,11 @@ virDomainEventCallbackListRemoveConn(virConnectPtr conn, if (freecb) (*freecb)(cbList->callbacks[i]->opaque); virUnrefConnect(cbList->callbacks[i]->conn); + if (cbList->callbacks[i]->eventID == VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN) { + if (cbList->callbacks[i]->eventName) + VIR_FREE(cbList->callbacks[i]->eventName); + } VIR_FREE(cbList->callbacks[i]); - if (i < (cbList->count - 1)) memmove(cbList->callbacks + i, cbList->callbacks + i + 1, @@ -299,8 +358,11 @@ int virDomainEventCallbackListPurgeMarked(virDomainEventCallbackListPtr cbList) if (freecb) (*freecb)(cbList->callbacks[i]->opaque); virUnrefConnect(cbList->callbacks[i]->conn); + if (cbList->callbacks[i]->eventID == VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN) { + if (cbList->callbacks[i]->eventName) + VIR_FREE(cbList->callbacks[i]->eventName); + } VIR_FREE(cbList->callbacks[i]); - if (i < (cbList->count - 1)) memmove(cbList->callbacks + i, cbList->callbacks + i + 1, @@ -404,7 +466,98 @@ virDomainEventCallbackListAddID(virConnectPtr conn, cbList->callbacks[cbList->count] = event; cbList->count++; + event->callbackID = cbList->nextID++; + + return event->callbackID; + +no_memory: + virReportOOMError(); + + if (event) { + if (event->dom) + VIR_FREE(event->dom->name); + VIR_FREE(event->dom); + } + VIR_FREE(event); + return -1; +} + + + +/** + * virDomainEventCallbackListAddName: + * @conn: pointer to the connection + * @cbList: the list + * @eventName: the event eventName + * @callback: the callback to add + * @eventID: the specific eventID + * @opaque: opaque data tio pass to callback + * + * Internal function to add a callback from a virDomainEventCallbackListPtr + */ +int +virDomainEventCallbackListAddName(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + virDomainPtr dom, + const char* eventName, + int eventID, + virConnectDomainEventGenericCallback callback, + void *opaque, + virFreeCallback freecb) +{ + virDomainEventCallbackPtr event; + int i; + + /* Check incoming */ + if ( !cbList ) { + return -1; + } + + /* check if we already have this callback on our list */ + for (i = 0 ; i < cbList->count ; i++) { + if (cbList->callbacks[i]->cb == VIR_DOMAIN_EVENT_CALLBACK(callback) && + !strcmp(cbList->callbacks[i]->eventName, eventName) && + cbList->callbacks[i]->eventID == eventID && + cbList->callbacks[i]->conn == conn) { + eventReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("event callback already tracked")); + return -1; + } + } + if (eventID > VIR_DOMAIN_EVENT_ID_LAST || eventID < VIR_DOMAIN_EVENT_ID_LIFECYCLE) { + eventReportError(VIR_ERR_INTERNAL_ERROR, "%s: %d", + _("not suport this kind of eventID"), eventID); + } + /* Allocate new event */ + if (VIR_ALLOC(event) < 0) + goto no_memory; + event->conn = conn; + event->cb = callback; + if (eventName == NULL) + goto no_memory; + event->eventName = strdup(eventName); + if ( event->eventName == NULL) + goto no_memory; + event->opaque = opaque; + event->freecb = freecb; + event->eventID = eventID; + if (dom) { + if (VIR_ALLOC(event->dom) < 0) + goto no_memory; + if (!(event->dom->name = strdup(dom->name))) + goto no_memory; + memcpy(event->dom->uuid, dom->uuid, VIR_UUID_BUFLEN); + event->dom->id = dom->id; + } + + /* Make space on list */ + if (VIR_REALLOC_N(cbList->callbacks, cbList->count + 1) < 0) + goto no_memory; + + event->conn->refs++; + cbList->callbacks[cbList->count] = event; + cbList->count++; event->callbackID = cbList->nextID++; return event->callbackID; @@ -416,11 +569,41 @@ no_memory: if (event->dom) VIR_FREE(event->dom->name); VIR_FREE(event->dom); + if (event->eventName) + VIR_FREE(event->eventName); } VIR_FREE(event); return -1; } +/** + * virDomainEventCallbackListAddQemuCallbackID: + * @conn: pointer to the connection + * @cbList: the list + * @callbackID: the libvirt callback ID + * @qemuCallbackID: the libvirtd callback ID to add + * + * Internal function to add a Daemon libvirtd callbackID + */ +int +virDomainEventCallbackListAddQemuCallbackID(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID, + int qemuCallbackID) +{ + int i; + for (i = 0 ; i < cbList->count ; i++) { + if (cbList->callbacks[i]->callbackID == callbackID && + cbList->callbacks[i]->conn == conn) { + cbList->callbacks[i]->qemuCallbackID = qemuCallbackID; + return 0; + } + } + + eventReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("could not find event callback for deletion")); + return -1; +} int virDomainEventCallbackListCountID(virConnectPtr conn, virDomainEventCallbackListPtr cbList, @@ -442,6 +625,27 @@ int virDomainEventCallbackListCountID(virConnectPtr conn, } +int +virDomainEventCallbackListCountName(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + const char *eventName) +{ + int i; + int count = 0; + + for (i = 0 ; i < cbList->count ; i++) { + if (cbList->callbacks[i]->deleted) + continue; + + if (!strcmp(cbList->callbacks[i]->eventName,eventName) && + cbList->callbacks[i]->conn == conn) + count++; + } + + return count; +} + + int virDomainEventCallbackListEventID(virConnectPtr conn, virDomainEventCallbackListPtr cbList, int callbackID) @@ -461,6 +665,44 @@ int virDomainEventCallbackListEventID(virConnectPtr conn, } +const char* +virDomainEventCallbackListEventName(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID) +{ + int i; + + for (i = 0 ; i < cbList->count ; i++) { + if (cbList->callbacks[i]->deleted) + continue; + + if (cbList->callbacks[i]->callbackID == callbackID && + cbList->callbacks[i]->conn == conn) + return cbList->callbacks[i]->eventName; + } + + return NULL; +} + +int +virDomainEventCallbackListEventQemuCallbackID(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID) +{ + int i; + + for (i = 0 ; i < cbList->count ; i++) { + if (cbList->callbacks[i]->deleted) + continue; + + if (cbList->callbacks[i]->callbackID == callbackID && + cbList->callbacks[i]->conn == conn) + return cbList->callbacks[i]->qemuCallbackID; + } + + return -1; +} + int virDomainEventCallbackListCount(virDomainEventCallbackListPtr cbList) { int i; @@ -521,6 +763,11 @@ void virDomainEventFree(virDomainEventPtr event) VIR_FREE(event->data.diskChange.newSrcPath); VIR_FREE(event->data.diskChange.devAlias); break; + + case VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN: + VIR_FREE(event->data.qemuUnknownEvent.eventName); + VIR_FREE(event->data.qemuUnknownEvent.eventArgs); + break; } VIR_FREE(event->dom.name); @@ -956,6 +1203,51 @@ virDomainEventPtr virDomainEventBlockJobNewFromDom(virDomainPtr dom, path, type, status); } +static virDomainEventPtr +virDomainEventUnknownNew(int id, const char *name, unsigned char *uuid, + const char *eventName, const char *eventArgs) +{ + virDomainEventPtr ev = + virDomainEventNewInternal(VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN, + id, name, uuid); + if (ev) { + if (!(ev->data.qemuUnknownEvent.eventName = strdup(eventName))) { + virReportOOMError(); + VIR_FREE(ev->dom.name); + VIR_FREE(ev); + return NULL; + } + if (eventArgs) { + if (!(ev->data.qemuUnknownEvent.eventArgs = strdup(eventArgs))) { + virReportOOMError(); + VIR_FREE(ev->data.qemuUnknownEvent.eventName); + VIR_FREE(ev->dom.name); + VIR_FREE(ev); + return NULL; + } + } + } + + return ev; +} + +virDomainEventPtr virDomainEventUnknownNewFromObj(virDomainObjPtr obj, + const char *eventName, + const char *eventArgs) +{ + + return virDomainEventUnknownNew(obj->def->id, obj->def->name, + obj->def->uuid, eventName, eventArgs); +} + +virDomainEventPtr virDomainEventUnknownNewFromDom(virDomainPtr dom, + const char *eventName, + const char *eventArgs) +{ + return virDomainEventUnknownNew(dom->id, dom->name, dom->uuid, + eventName, eventArgs); +} + virDomainEventPtr virDomainEventControlErrorNewFromDom(virDomainPtr dom) { virDomainEventPtr ev = @@ -1095,11 +1387,12 @@ virDomainEventQueuePush(virDomainEventQueuePtr evtQueue, } -void virDomainEventDispatchDefaultFunc(virConnectPtr conn, - virDomainEventPtr event, - virConnectDomainEventGenericCallback cb, - void *cbopaque, - void *opaque ATTRIBUTE_UNUSED) +void +virDomainEventDispatchDefaultFunc(virConnectPtr conn, + virDomainEventPtr event, + virConnectDomainEventGenericCallback cb, + void *cbopaque, + void *opaque ATTRIBUTE_UNUSED) { virDomainPtr dom = virGetDomain(conn, event->dom.name, event->dom.uuid); if (!dom) @@ -1180,6 +1473,13 @@ void virDomainEventDispatchDefaultFunc(virConnectPtr conn, cbopaque); break; + case VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN: + ((virConnectDomainQemuEventCallback)cb)(conn, dom, + event->data.qemuUnknownEvent.eventName, + event->data.qemuUnknownEvent.eventArgs, + cbopaque); + break; + default: VIR_WARN("Unexpected event ID %d", event->eventID); break; @@ -1189,8 +1489,9 @@ void virDomainEventDispatchDefaultFunc(virConnectPtr conn, } -static int virDomainEventDispatchMatchCallback(virDomainEventPtr event, - virDomainEventCallbackPtr cb) +static int +virDomainEventDispatchMatchCallback(virDomainEventPtr event, + virDomainEventCallbackPtr cb) { if (!cb) return 0; @@ -1198,7 +1499,12 @@ static int virDomainEventDispatchMatchCallback(virDomainEventPtr event, return 0; if (cb->eventID != event->eventID) return 0; - + if (event->eventID == VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN) { + if(event->data.qemuUnknownEvent.eventName == NULL || + cb->eventName == NULL || + strcmp(cb->eventName, event->data.qemuUnknownEvent.eventName) != 0) + return 0; + } if (cb->dom) { /* Deliberately ignoring 'id' for matching, since that * will cause problems when a domain switches between @@ -1341,3 +1647,20 @@ virDomainEventStateDeregisterAny(virConnectPtr conn, virDomainEventStateUnlock(state); return ret; } +int +virDomainQemuEventStateDeregister(virConnectPtr conn, + virDomainEventStatePtr state, + int callbackID) +{ + int ret; + + virDomainEventStateLock(state); + if (state->isDispatching) + ret = virDomainEventCallbackListMarkDeleteID(conn, + state->callbacks, callbackID); + else + ret = virDomainQemuEventCallbackListRemoveID(conn, + state->callbacks, callbackID); + virDomainEventStateUnlock(state); + return ret; +} diff --git a/src/conf/domain_event.h b/src/conf/domain_event.h index 3ba418e..c0edfac 100644 --- a/src/conf/domain_event.h +++ b/src/conf/domain_event.h @@ -26,7 +26,6 @@ # define __DOMAIN_EVENT_H__ # include "domain_conf.h" - typedef struct _virDomainEventCallback virDomainEventCallback; typedef virDomainEventCallback *virDomainEventCallbackPtr; @@ -83,6 +82,15 @@ int virDomainEventCallbackListAddID(virConnectPtr conn, virFreeCallback freecb) ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(5); +int virDomainEventCallbackListAddName(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + virDomainPtr dom, + const char* eventName, + int eventID, + virConnectDomainEventGenericCallback callback, + void *opaque, + virFreeCallback freecb) + ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(4) ATTRIBUTE_NONNULL(6); int virDomainEventCallbackListRemove(virConnectPtr conn, virDomainEventCallbackListPtr cbList, @@ -92,6 +100,10 @@ int virDomainEventCallbackListRemoveID(virConnectPtr conn, virDomainEventCallbackListPtr cbList, int callbackID) ATTRIBUTE_NONNULL(1); +int virDomainQemuEventCallbackListRemoveID(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID) + ATTRIBUTE_NONNULL(1); int virDomainEventCallbackListRemoveConn(virConnectPtr conn, virDomainEventCallbackListPtr cbList) ATTRIBUTE_NONNULL(1); @@ -106,9 +118,14 @@ int virDomainEventCallbackListMarkDeleteID(virConnectPtr conn, int callbackID) ATTRIBUTE_NONNULL(1); - int virDomainEventCallbackListPurgeMarked(virDomainEventCallbackListPtr cbList); +int virDomainEventCallbackListAddQemuCallbackID(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID, + int qemuCallbackID) + ATTRIBUTE_NONNULL(1); + int virDomainEventCallbackListCount(virDomainEventCallbackListPtr cbList); int virDomainEventCallbackListCountID(virConnectPtr conn, virDomainEventCallbackListPtr cbList, @@ -119,6 +136,21 @@ int virDomainEventCallbackListEventID(virConnectPtr conn, int callbackID) ATTRIBUTE_NONNULL(1); +int virDomainEventCallbackListCountName(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + const char *eventName) + ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(3); + +int virDomainEventCallbackListEventQemuCallbackID(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID) + ATTRIBUTE_NONNULL(1); + +const char* virDomainEventCallbackListEventName(virConnectPtr conn, + virDomainEventCallbackListPtr cbList, + int callbackID) + ATTRIBUTE_NONNULL(1); + virDomainEventQueuePtr virDomainEventQueueNew(void); virDomainEventPtr virDomainEventNew(int id, const char *name, const unsigned char *uuid, int type, int detail); @@ -190,6 +222,13 @@ virDomainEventPtr virDomainEventDiskChangeNewFromDom(virDomainPtr dom, const char *devAlias, int reason); +virDomainEventPtr virDomainEventUnknownNewFromObj(virDomainObjPtr obj, + const char *eventName, + const char *eventArgs); +virDomainEventPtr virDomainEventUnknownNewFromDom(virDomainPtr dom, + const char *eventName, + const char *eventArgs); + int virDomainEventQueuePush(virDomainEventQueuePtr evtQueue, virDomainEventPtr event); @@ -246,5 +285,9 @@ virDomainEventStateDeregisterAny(virConnectPtr conn, virDomainEventStatePtr state, int callbackID) ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2); - +int +virDomainQemuEventStateDeregister(virConnectPtr conn, + virDomainEventStatePtr state, + int callbackID) + ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2); #endif diff --git a/src/driver.h b/src/driver.h index 941ff51..51164a9 100644 --- a/src/driver.h +++ b/src/driver.h @@ -635,6 +635,18 @@ typedef virDomainPtr unsigned int flags); typedef int + (*virDrvDomainQemuEventRegister)(virConnectPtr conn, + virDomainPtr dom, /* option to filter */ + const char *eventName, /* JSON event name */ + virConnectDomainEventGenericCallback cb, + void *opaque, + virFreeCallback freecb); + +typedef int + (*virDrvDomainQemuEventDeregister)(virConnectPtr conn, + int callbackID); + +typedef int (*virDrvDomainOpenConsole)(virDomainPtr dom, const char *dev_name, virStreamPtr st, @@ -915,6 +927,8 @@ struct _virDriver { virDrvDomainSnapshotDelete domainSnapshotDelete; virDrvDomainQemuMonitorCommand qemuDomainMonitorCommand; virDrvDomainQemuAttach qemuDomainAttach; + virDrvDomainQemuEventRegister qemuDomainQemuEventRegister; + virDrvDomainQemuEventDeregister qemuDomainQemuEventDeregister; virDrvDomainOpenConsole domainOpenConsole; virDrvDomainOpenGraphics domainOpenGraphics; virDrvDomainInjectNMI domainInjectNMI; diff --git a/src/libvirt-qemu.c b/src/libvirt-qemu.c index 248cc33..c84375c 100644 --- a/src/libvirt-qemu.c +++ b/src/libvirt-qemu.c @@ -36,6 +36,77 @@ virReportErrorHelper(VIR_FROM_DOM, error, NULL, __FUNCTION__, \ __LINE__, info) +/* Helper macros to implement VIR_DOMAIN_DEBUG using just C99. This + * assumes you pass fewer than 15 arguments to VIR_DOMAIN_DEBUG, but + * can easily be expanded if needed. + * + * Note that gcc provides extensions of "define a(b...) b" or + * "define a(b,...) b,##__VA_ARGS__" as a means of eliding a comma + * when no var-args are present, but we don't want to require gcc. + */ +#define VIR_ARG15(_1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _13, _14, _15, ...) _15 +#define VIR_HAS_COMMA(...) VIR_ARG15(__VA_ARGS__, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0) + +/* Form the name VIR_DOMAIN_DEBUG_[01], then call that macro, + * according to how many arguments are present. Two-phase due to + * macro expansion rules. */ +#define VIR_DOMAIN_DEBUG_EXPAND(a, b, ...) \ + VIR_DOMAIN_DEBUG_PASTE(a, b, __VA_ARGS__) +#define VIR_DOMAIN_DEBUG_PASTE(a, b, ...) \ + a##b(__VA_ARGS__) + +/* Internal use only, when VIR_DOMAIN_DEBUG has one argument. */ +#define VIR_DOMAIN_DEBUG_0(dom) \ + VIR_DOMAIN_DEBUG_2(dom, "%s", "") + +/* Internal use only, when VIR_DOMAIN_DEBUG has three or more arguments. */ +#define VIR_DOMAIN_DEBUG_1(dom, fmt, ...) \ + VIR_DOMAIN_DEBUG_2(dom, ", " fmt, __VA_ARGS__) + +/* Internal use only, with final format. */ +#define VIR_DOMAIN_DEBUG_2(dom, fmt, ...) \ + do { \ + char _uuidstr[VIR_UUID_STRING_BUFLEN]; \ + const char *_domname = NULL; \ + \ + if (!VIR_IS_DOMAIN(dom)) { \ + memset(_uuidstr, 0, sizeof(_uuidstr)); \ + } else { \ + virUUIDFormat((dom)->uuid, _uuidstr); \ + _domname = (dom)->name; \ + } \ + \ + VIR_DEBUG("dom=%p, (VM: name=%s, uuid=%s)" fmt, \ + dom, NULLSTR(_domname), _uuidstr, __VA_ARGS__); \ + } while (0) + +/** + * VIR_DOMAIN_DEBUG: + * @dom: domain + * @fmt: optional format for additional information + * @...: optional arguments corresponding to @fmt. + */ +#define VIR_DOMAIN_DEBUG(...) \ + VIR_DOMAIN_DEBUG_EXPAND(VIR_DOMAIN_DEBUG_, \ + VIR_HAS_COMMA(__VA_ARGS__), \ + __VA_ARGS__) + +/** + * VIR_UUID_DEBUG: + * @conn: connection + * @uuid: possibly null UUID array + */ +#define VIR_UUID_DEBUG(conn, uuid) \ + do { \ + if (uuid) { \ + char _uuidstr[VIR_UUID_STRING_BUFLEN]; \ + virUUIDFormat(uuid, _uuidstr); \ + VIR_DEBUG("conn=%p, uuid=%s", conn, _uuidstr); \ + } else { \ + VIR_DEBUG("conn=%p, uuid=(null)", conn); \ + } \ + } while (0) + /** * virDomainQemuMonitorCommand: * @domain: a domain object @@ -178,3 +249,122 @@ error: virDispatchError(conn); return NULL; } + +/** + * virConnectDomainQemuEventRegister: + * @conn: pointer to the connection + * @dom: pointer to the domain + * @eventName: the event Name to receive + * @cb: callback to the function handling domain events + * @opaque: opaque data to pass on to the callback + * @freecb: optional function to deallocate opaque when not used anymore + * + * Adds a callback to receive notifications of arbitrary qemu domain events + * occurring on a domain. + * + * If dom is NULL, then events will be monitored for any domain. If dom + * is non-NULL, then only the specific domain will be monitored + * + * Most types of event have a callback providing a custom set of parameters + * for the event. When registering an event, it is thus neccessary to use + * the VIR_DOMAIN_EVENT_CALLBACK() macro to cast the supplied function pointer + * to match the signature of this method. + * + * The virDomainPtr object handle passed into the callback upon delivery + * of an event is only valid for the duration of execution of the callback. + * If the callback wishes to keep the domain object after the callback returns, + * it shall take a reference to it, by calling virDomainRef. + * The reference can be released once the object is no longer required + * by calling virDomainFree. + * + * The return value from this method is a positive integer identifier + * for the callback. To unregister a callback, this callback ID should + * be passed to the virConnectDomainQemuEventDeregister method + * + * Returns a callback identifier on success, -1 on failure + */ +int +virConnectDomainQemuEventRegister(virConnectPtr conn, + virDomainPtr dom, /* option to filter */ + const char *eventName, /* JSON event name */ + virConnectDomainQemuEventCallback cb, + void *opaque, + virFreeCallback freecb) +{ + VIR_DOMAIN_DEBUG(dom, "conn=%p, eventName=%s, cb=%p, opaque=%p, freecb=%p", + conn, eventName, cb, opaque, freecb); + + virResetLastError(); + + if (!VIR_IS_CONNECT(conn)) { + virLibConnError(conn, VIR_ERR_INVALID_CONN, __FUNCTION__); + virLibConnError(conn, VIR_ERR_INVALID_CONN, "my_test_fuction"); + virDispatchError(NULL); + return -1; + } + if (dom != NULL && + !(VIR_IS_CONNECTED_DOMAIN(dom) && dom->conn == conn)) { + virLibConnError(conn, VIR_ERR_INVALID_CONN, __FUNCTION__); + virDispatchError(conn); + return -1; + } + if (eventName == NULL || cb == NULL) { + virLibConnError(conn, VIR_ERR_INVALID_ARG, __FUNCTION__); + goto error; + } + + if ((conn->driver) && (conn->driver->qemuDomainQemuEventRegister)) { + int ret; + ret = conn->driver->qemuDomainQemuEventRegister(conn, dom, eventName, cb, opaque, freecb); + if (ret < 0) + goto error; + return ret; + } + + virLibConnError(conn, VIR_ERR_NO_SUPPORT, __FUNCTION__); +error: + virDispatchError(conn); + return -1; +} + +/** + * virConnectDomainQemuEventDeregister: + * @conn: pointer to the connection + * @callbackID: the callback identifier + * + * Removes an event callback. The callbackID parameter should be the + * vaule obtained from a previous virConnectDomainQemuEventDeregister method. + * + * Returns 0 on success, -1 on failure + */ +int +virConnectDomainQemuEventDeregister(virConnectPtr conn, + int callbackID) +{ + + VIR_DEBUG("conn=%p, callbackID=%d", conn, callbackID); + + virResetLastError(); + + if (!VIR_IS_CONNECT(conn)) { + virLibConnError(conn, VIR_ERR_INVALID_CONN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + if (callbackID < 0) { + virLibConnError(conn, VIR_ERR_INVALID_ARG, __FUNCTION__); + goto error; + } + if ((conn->driver) && (conn->driver->qemuDomainQemuEventDeregister)) { + int ret; + ret = conn->driver->qemuDomainQemuEventDeregister(conn, callbackID); + if (ret < 0) + goto error; + return ret; + } + + virLibConnError(conn, VIR_ERR_NO_SUPPORT, __FUNCTION__); +error: + virDispatchError(conn); + return -1; +} diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index a81c230..b92ce71 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -470,11 +470,16 @@ virDomainWatchdogModelTypeToString; # domain_event.h virDomainEventBlockJobNewFromObj; virDomainEventBlockJobNewFromDom; +virDomainEventUnknownNewFromObj; +virDomainEventunknownNewFromDom; virDomainEventCallbackListAdd; virDomainEventCallbackListAddID; +virDomainEventCallbackListAddName; virDomainEventCallbackListCount; virDomainEventCallbackListCountID; +virDomainEventCallbackListCountName; virDomainEventCallbackListEventID; +virDomainEventCallbackListEventName; virDomainEventCallbackListFree; virDomainEventCallbackListMarkDelete; virDomainEventCallbackListMarkDeleteID; @@ -511,6 +516,7 @@ virDomainEventRebootNewFromDom; virDomainEventRebootNewFromObj; virDomainEventStateDeregister; virDomainEventStateDeregisterAny; +virDomainQemuEventStateDeregister; virDomainEventStateFlush; virDomainEventStateFree; virDomainEventStateNew; diff --git a/src/libvirt_qemu.syms b/src/libvirt_qemu.syms index 8447730..a17e387 100644 --- a/src/libvirt_qemu.syms +++ b/src/libvirt_qemu.syms @@ -19,3 +19,8 @@ LIBVIRT_QEMU_0.9.4 { global: virDomainQemuAttach; } LIBVIRT_QEMU_0.8.3; +LIBVIRT_QEMU_0.9.9 { + global: + virConnectDomainQemuEventRegister; + virConnectDomainQemuEventDeregister; +} LIBVIRT_QEMU_0.9.4; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index ceb9f47..31fe966 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -8217,6 +8217,46 @@ qemuDomainEventDeregisterAny(virConnectPtr conn, } +static int +qemuDomainQemuEventRegister(virConnectPtr conn, + virDomainPtr dom, + const char *eventName, + virConnectDomainEventGenericCallback callback, + void *opaque, + virFreeCallback freecb) +{ + struct qemud_driver *driver = conn->privateData; + int ret; + + qemuDriverLock(driver); + ret = virDomainEventCallbackListAddName(conn, + driver->domainEventState->callbacks, + dom, eventName, + VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN, + callback, opaque, freecb); + qemuDriverUnlock(driver); + + return ret; +} + + +static int +qemuDomainQemuEventDeregister(virConnectPtr conn, + int callbackID) +{ + struct qemud_driver *driver = conn->privateData; + int ret; + + qemuDriverLock(driver); + ret = virDomainQemuEventStateDeregister(conn, + driver->domainEventState, + callbackID); + qemuDriverUnlock(driver); + + return ret; +} + + /******************************************************************* * Migration Protocol Version 2 *******************************************************************/ @@ -11564,6 +11604,8 @@ static virDriver qemuDriver = { .domainMigrateGetMaxSpeed = qemuDomainMigrateGetMaxSpeed, /* 0.9.5 */ .domainEventRegisterAny = qemuDomainEventRegisterAny, /* 0.8.0 */ .domainEventDeregisterAny = qemuDomainEventDeregisterAny, /* 0.8.0 */ + .qemuDomainQemuEventRegister = qemuDomainQemuEventRegister, /* 0.9.9 */ + .qemuDomainQemuEventDeregister = qemuDomainQemuEventDeregister, /* 0.9.9 */ .domainManagedSave = qemuDomainManagedSave, /* 0.8.0 */ .domainHasManagedSaveImage = qemuDomainHasManagedSaveImage, /* 0.8.0 */ .domainManagedSaveRemove = qemuDomainManagedSaveRemove, /* 0.8.0 */ diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 4141fb7..e6cd39c 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -959,6 +959,16 @@ int qemuMonitorEmitBlockJob(qemuMonitorPtr mon, return ret; } +int qemuMonitorEmitUnknownEvent(qemuMonitorPtr mon, + const char *eventName, + const char *eventArgs) +{ + int ret = -1; + VIR_DEBUG("mon=%p", mon); + QEMU_MONITOR_CALLBACK(mon, ret, domainUnknownEvent, mon->vm, + eventName, eventArgs); + return ret; +} int qemuMonitorSetCapabilities(qemuMonitorPtr mon) diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index 15acf8b..d3685b4 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -123,6 +123,10 @@ struct _qemuMonitorCallbacks { const char *diskAlias, int type, int status); + int (*domainUnknownEvent)(qemuMonitorPtr mon, + virDomainObjPtr vm, + const char *eventName, + const char *eventArgs); }; @@ -193,6 +197,10 @@ int qemuMonitorEmitBlockJob(qemuMonitorPtr mon, int type, int status); +int qemuMonitorEmitUnknownEvent(qemuMonitorPtr mon, + const char *eventName, + const char *eventArgs); + int qemuMonitorStartCPUs(qemuMonitorPtr mon, diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index 1ef3e84..a5fc1e6 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -58,6 +58,7 @@ static void qemuMonitorJSONHandleVNCConnect(qemuMonitorPtr mon, virJSONValuePtr static void qemuMonitorJSONHandleVNCInitialize(qemuMonitorPtr mon, virJSONValuePtr data); static void qemuMonitorJSONHandleVNCDisconnect(qemuMonitorPtr mon, virJSONValuePtr data); static void qemuMonitorJSONHandleBlockJob(qemuMonitorPtr mon, virJSONValuePtr data); +static void qemuMonitorJSONHandleUnmatchedEvent(qemuMonitorPtr mon, virJSONValuePtr obj); struct { const char *type; @@ -74,6 +75,7 @@ struct { { "VNC_INITIALIZED", qemuMonitorJSONHandleVNCInitialize, }, { "VNC_DISCONNECTED", qemuMonitorJSONHandleVNCDisconnect, }, { "BLOCK_JOB_COMPLETED", qemuMonitorJSONHandleBlockJob, }, + { "DEFAULT_UNKNOW_EVENT", qemuMonitorJSONHandleUnmatchedEvent, }, }; @@ -83,6 +85,7 @@ qemuMonitorJSONIOProcessEvent(qemuMonitorPtr mon, { const char *type; int i; + int findEventFlag = -1; VIR_DEBUG("mon=%p obj=%p", mon, obj); type = virJSONValueObjectGetString(obj, "event"); @@ -98,9 +101,24 @@ qemuMonitorJSONIOProcessEvent(qemuMonitorPtr mon, VIR_DEBUG("handle %s handler=%p data=%p", type, eventHandlers[i].handler, data); (eventHandlers[i].handler)(mon, data); + findEventFlag = 0; break; } } + if (findEventFlag != 0) { + if (!STREQ(eventHandlers[ARRAY_CARDINALITY(eventHandlers)-1].type, "DEFAULT_UNKNOW_EVENT")) { + VIR_ERROR("the last element is not the default event handler"); + } + else { + char *event = NULL; + event = virJSONValueToString(obj); + if (event != NULL) { + VIR_DEBUG("Unknow event,call default event handler %s",event); + free(event); + } + (eventHandlers[ARRAY_CARDINALITY(eventHandlers)-1].handler)(mon, obj); + } + } return 0; } @@ -724,6 +742,24 @@ out: } +static void +qemuMonitorJSONHandleUnmatchedEvent(qemuMonitorPtr mon, virJSONValuePtr obj) +{ + const char *eventArgsStr = NULL; + const char *type = NULL; + virJSONValuePtr data = NULL; + type = virJSONValueObjectGetString(obj, "event"); + data = virJSONValueObjectGet(obj, "data"); + if (data) { + eventArgsStr = virJSONValueToString(data); + } + if (eventArgsStr == NULL) { + VIR_ERROR("no data string from JSONValue"); + } + qemuMonitorEmitUnknownEvent(mon, type, eventArgsStr); +} + + int qemuMonitorJSONHumanCommandWithFd(qemuMonitorPtr mon, const char *cmd_str, diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 9123f4c..55e5464 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -755,6 +755,29 @@ qemuProcessHandleBlockJob(qemuMonitorPtr mon ATTRIBUTE_UNUSED, } static int +qemuProcessHandleUnknownEvent(qemuMonitorPtr mon ATTRIBUTE_UNUSED, + virDomainObjPtr vm, + const char *eventName, + const char *eventArgs) +{ + struct qemud_driver *driver = qemu_driver; + virDomainEventPtr event = NULL; + + virDomainObjLock(vm); + event = virDomainEventUnknownNewFromObj(vm, eventName, eventArgs); + + virDomainObjUnlock(vm); + + if (event) { + qemuDriverLock(driver); + qemuDomainEventQueue(driver, event); + qemuDriverUnlock(driver); + } + + return 0; +} + +static int qemuProcessHandleGraphics(qemuMonitorPtr mon ATTRIBUTE_UNUSED, virDomainObjPtr vm, int phase, @@ -871,6 +894,7 @@ static qemuMonitorCallbacks monitorCallbacks = { .domainIOError = qemuProcessHandleIOError, .domainGraphics = qemuProcessHandleGraphics, .domainBlockJob = qemuProcessHandleBlockJob, + .domainUnknownEvent = qemuProcessHandleUnknownEvent, }; static int diff --git a/src/remote/qemu_protocol.x b/src/remote/qemu_protocol.x index 39f9adf..5f4ed61 100644 --- a/src/remote/qemu_protocol.x +++ b/src/remote/qemu_protocol.x @@ -47,6 +47,34 @@ struct qemu_domain_attach_ret { remote_nonnull_domain dom; }; +struct qemu_domain_events_register_args { + remote_nonnull_string eventName; +}; + +struct qemu_domain_events_deregister_args { + remote_nonnull_string eventName; + int callbackID; +}; + +struct qemu_domain_events_register_ret { + int callbackID; +}; + +struct qemu_domain_events_deregister_ret { + int cb_deregistered; +}; + +struct qemu_domain_events_unknown_event_args { + remote_nonnull_domain dom; + remote_nonnull_string eventName; + remote_nonnull_string eventArgs; +}; + +struct qemu_domain_events_unknown_event_ret { + int event_ret; +}; + + /* Define the program number, protocol version and procedure numbers here. */ const QEMU_PROGRAM = 0x20008087; const QEMU_PROTOCOL_VERSION = 1; @@ -61,5 +89,8 @@ enum qemu_procedure { * are some exceptions to this rule, e.g. domainDestroy. Other APIs MAY * be marked as high priority. If in doubt, it's safe to choose low. */ QEMU_PROC_MONITOR_COMMAND = 1, /* skipgen skipgen priority:low */ - QEMU_PROC_DOMAIN_ATTACH = 2 /* autogen autogen priority:low */ + QEMU_PROC_DOMAIN_ATTACH = 2, /* autogen autogen priority:low */ + QEMU_PROC_DOMAIN_EVENTS_REGISTER = 3, /* skipgen skipgen priority:low */ + QEMU_PROC_DOMAIN_EVENTS_DEREGISTER = 4, /* skipgen skipgen priority:low */ + QEMU_PROC_DOMAIN_EVENTS_UNKNOWN_EVENT = 5 /* skipgen skipgen priority:low */ }; diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index ff2d4b4..1f7b25d 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -238,6 +238,10 @@ static void remoteDomainBuildEventDiskChange(virNetClientProgramPtr prog, virNetClientPtr client, void *evdata, void *opaque); +static void +remoteQemuDomainBuildEventDefaultEvent(virNetClientProgramPtr prog, + virNetClientPtr client, + void *evdata, void *opaque); static virNetClientProgramEvent remoteDomainEvents[] = { { REMOTE_PROC_DOMAIN_EVENT_RTC_CHANGE, @@ -280,6 +284,10 @@ static virNetClientProgramEvent remoteDomainEvents[] = { remoteDomainBuildEventDiskChange, sizeof(remote_domain_event_disk_change_msg), (xdrproc_t)xdr_remote_domain_event_disk_change_msg }, + { REMOTE_PROC_QEMU_DOMAIN_EVENT_UNKNOWN_EVENT, + remoteQemuDomainBuildEventDefaultEvent, + sizeof(remote_domain_event_default_event_msg), + (xdrproc_t)xdr_remote_domain_event_default_event_msg }, }; enum virDrvOpenRemoteFlags { @@ -3345,6 +3353,28 @@ remoteDomainBuildEventBlockJob(virNetClientProgramPtr prog ATTRIBUTE_UNUSED, } static void +remoteQemuDomainBuildEventDefaultEvent(virNetClientProgramPtr prog ATTRIBUTE_UNUSED, + virNetClientPtr client ATTRIBUTE_UNUSED, + void *evdata, void *opaque) +{ + virConnectPtr conn = opaque; + struct private_data *priv = conn->privateData; + remote_domain_event_default_event_msg *msg = evdata; + virDomainPtr dom; + virDomainEventPtr event = NULL; + + dom = get_nonnull_domain(conn, msg->dom); + if (!dom) + return; + + event = virDomainEventUnknownNewFromDom(dom, msg->eventName, msg->eventArgs); + + virDomainFree(dom); + + remoteDomainEventQueue(priv, event); +} + +static void remoteDomainBuildEventGraphics(virNetClientProgramPtr prog ATTRIBUTE_UNUSED, virNetClientPtr client ATTRIBUTE_UNUSED, void *evdata, void *opaque) @@ -3800,7 +3830,6 @@ done: return rv; } - static int remoteDomainEventDeregisterAny(virConnectPtr conn, int callbackID) { @@ -3843,6 +3872,126 @@ done: return rv; } +static int +remoteDomainQemuEventRegister(virConnectPtr conn, + virDomainPtr dom, + const char *eventName, + virConnectDomainEventGenericCallback callback, + void *opaque, + virFreeCallback freecb) +{ + int rv = -1; + struct private_data *priv = conn->privateData; + qemu_domain_events_register_args args; + qemu_domain_events_register_ret ret; + int callbackID; + + remoteDriverLock(priv); + + if (priv->domainEventState->timer < 0) { + remoteError(VIR_ERR_NO_SUPPORT, "%s", _("no event support")); + goto done; + } + + if ((callbackID = virDomainEventCallbackListAddName(conn, + priv->domainEventState->callbacks, + dom, eventName, + VIR_QEMU_DOMAIN_EVENT_ID_UNKNOWN, + callback, opaque, freecb)) < 0) { + remoteError(VIR_ERR_RPC, "%s", _("adding cb to list")); + goto done; + } + + /* If this is the first callback for this eventID, we need to enable + * events on the server */ + if (virDomainEventCallbackListCountName(conn, + priv->domainEventState->callbacks, + eventName) == 1) { + args.eventName= (char *)eventName; + + if (call (conn, priv, REMOTE_CALL_QEMU, QEMU_PROC_DOMAIN_EVENTS_REGISTER, + (xdrproc_t) xdr_qemu_domain_events_register_args, (char *) &args, + (xdrproc_t) xdr_qemu_domain_events_register_ret, (char *) &ret) == -1) { + virDomainEventCallbackListRemoveID(conn, + priv->domainEventState->callbacks, + callbackID); + goto done; + } + } + virDomainEventCallbackListAddQemuCallbackID(conn, + priv->domainEventState->callbacks, + callbackID, + ret.callbackID); + rv = callbackID; + +done: + remoteDriverUnlock(priv); + return rv; +} + +static int remoteDomainQemuEventDeregister(virConnectPtr conn, + int callbackID) +{ + struct private_data *priv = conn->privateData; + int rv = -1; + qemu_domain_events_deregister_args args; + qemu_domain_events_deregister_ret ret; + char *eventName = NULL; + ret.cb_deregistered = -1; + + remoteDriverLock(priv); + + if ((eventName = (char *)virDomainEventCallbackListEventName(conn, + priv->domainEventState->callbacks, + callbackID)) == NULL) { + remoteError(VIR_ERR_RPC, _("unable to find callback ID %d"), callbackID); + goto done; + } + eventName = strdup(eventName); + if (eventName == NULL) + goto done; + + if ((args.callbackID = virDomainEventCallbackListEventQemuCallbackID(conn, + priv->domainEventState->callbacks, + callbackID)) == -1) { + remoteError(VIR_ERR_RPC, _("unable to find callback ID %d"), callbackID); + goto done; + } + + if (virDomainQemuEventStateDeregister(conn, + priv->domainEventState, + callbackID) < 0) + goto done; + + /* If that was the last callback for this eventName, we need to disable + * events on the server */ + if (virDomainEventCallbackListCountName(conn, + priv->domainEventState->callbacks, + eventName) == 0) { + args.eventName = eventName; + + if (call (conn, priv, REMOTE_CALL_QEMU, QEMU_PROC_DOMAIN_EVENTS_DEREGISTER, + (xdrproc_t) xdr_qemu_domain_events_deregister_args, (char *) &args, + (xdrproc_t) xdr_qemu_domain_events_deregister_ret, (char *) &ret) == -1) { + goto done; + } + + if ( ret.cb_deregistered == -1 ) { + remoteError(VIR_ERR_RPC, _("remote sever deregeiter remote callbackID:%d, and the client callbackID%d"), + args.callbackID, + callbackID); + goto done; + } + rv = ret.cb_deregistered; + } + + +done: + remoteDriverUnlock(priv); + if (eventName != NULL) + VIR_FREE(eventName); + return rv; +} /*----------------------------------------------------------------------*/ @@ -4627,6 +4776,8 @@ static virDriver remote_driver = { .nodeGetFreeMemory = remoteNodeGetFreeMemory, /* 0.3.3 */ .domainEventRegister = remoteDomainEventRegister, /* 0.5.0 */ .domainEventDeregister = remoteDomainEventDeregister, /* 0.5.0 */ + .qemuDomainQemuEventRegister = remoteDomainQemuEventRegister, /* 0.9.9 */ + .qemuDomainQemuEventDeregister = remoteDomainQemuEventDeregister, /* 0.9.9 */ .domainMigratePrepare2 = remoteDomainMigratePrepare2, /* 0.5.0 */ .domainMigrateFinish2 = remoteDomainMigrateFinish2, /* 0.5.0 */ .nodeDeviceDettach = remoteNodeDeviceDettach, /* 0.6.1 */ diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x index 509a20b..4239db8 100644 --- a/src/remote/remote_protocol.x +++ b/src/remote/remote_protocol.x @@ -2049,6 +2049,12 @@ struct remote_domain_event_disk_change_msg { int reason; }; +struct remote_domain_event_default_event_msg { + remote_nonnull_domain dom; + remote_nonnull_string eventName; + remote_nonnull_string eventArgs; +}; + struct remote_domain_managed_save_args { remote_nonnull_domain dom; unsigned int flags; @@ -2605,7 +2611,8 @@ enum remote_procedure { REMOTE_PROC_DOMAIN_BLOCK_RESIZE = 251, /* autogen autogen */ REMOTE_PROC_DOMAIN_SET_BLOCK_IO_TUNE = 252, /* autogen autogen */ - REMOTE_PROC_DOMAIN_GET_BLOCK_IO_TUNE = 253 /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_GET_BLOCK_IO_TUNE = 253, /* skipgen skipgen */ + REMOTE_PROC_QEMU_DOMAIN_EVENT_UNKNOWN_EVENT = 254 /* skipgen skipgen */ /* * Notice how the entries are grouped in sets of 10 ? diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs index a9d4296..17b3896 100644 --- a/src/remote_protocol-structs +++ b/src/remote_protocol-structs @@ -1546,6 +1546,10 @@ struct remote_domain_event_disk_change_msg { remote_nonnull_string devAlias; int reason; }; +struct remote_domain_event_default_event_msg { + remote_nonnull_domain dom; + remote_nonnull_string rawEvent; +}; struct remote_domain_managed_save_args { remote_nonnull_domain dom; u_int flags; @@ -2044,4 +2048,5 @@ enum remote_procedure { REMOTE_PROC_DOMAIN_BLOCK_RESIZE = 251, REMOTE_PROC_DOMAIN_SET_BLOCK_IO_TUNE = 252, REMOTE_PROC_DOMAIN_GET_BLOCK_IO_TUNE = 253, + REMOTE_PROC_QEMU_DOMAIN_EVENT_UNKNOWN_EVENT = 254, }; -- 1.7.5.4

1 0

[libvirt] Release of libvirt-0.9.8
by Daniel Veillard 13 Dec '11

13 Dec '11

One month exactly after the previous release, 0.9.8 is available at ftp://libvirt.org/libvirt/ This release is a balanced mix of new features, improvements and various bug fixes, and with a higher than usual amount of portability fixes: Features: - Add support for QEMU 1.0 (Jiri Denemark) - Add PPC cpu driver. (Prerna Saxena) - Add new API virDomain{Set, Get}BlockIoTune (Lei Li) - block_resize: Define the new API (Osier Yang) - Add a public API to invoke suspend/resume on the host (Srivatsa S. Bhat) - various improvements for LXC containers (Daniel P. Berrange) - Define keepalive protocol and add virConnectIsAlive API (Jiri Denemark) - Add support for STP filtering (Stefan Berger) - Add support for VLAN filtering (Stefan Berger) Documentation: - Add documentation for <disk><source type="dir"> (Christophe Fergeau) - Fix typo in virDomainResume API doc (Christophe Fergeau) - maint: fix improper use of 'an' (Eric Blake) - virsh: translate net-info help (Eric Blake) - maint: typo fixes (Eric Blake) - virsh: Fix typos in man page (Jiri Denemark) - rpc: Fix a typo in virNetClientSendNonBlock documentation (Jiri Denemark) - docs: fix grammar of capabilities (Eric Blake) - Documentation about chains' priorities, lists of elements etc. (Stefan Berger) Portability: - spec: don't use chkconfig --list (Eric Blake) - build: fix build with older libxml2 (Eric Blake) - Conditionalize daemonPath decl for Win32 which lacks UNIX sockets (Daniel P. Berrange) - build: reduce warnings from older gcc (Eric Blake) - Fix incorrect symbols for virtime.h module breaking Mingw32 (Daniel P. Berrange) - build: fix build on Cygwin (Eric Blake) - build: fix build at -O2 on rawhide (Eric Blake) - Fix build for platforms lacking struct ifreq (Daniel P. Berrange) - build: fix 'make dist' without dtrace (Eric Blake) - Don't use undocumented __isleap macro (Daniel P. Berrange) - virnetsocket: pass XAUTORITY for ssh connection (Christian Franke) - Fix build on Mingw32 wrt export of virNetServerGetDBusConn (Daniel P. Berrange) - build: fix compile error with no macvtap (Eric Blake) - Fix build with polkit0 (Jim Fehlig) - Fix strchr call triggering gcc 4.3 & 4.4 bug (Stefan Berger) - PATCH: Fix build without MACVTAP (Michael Wood) - util: fix compile error on debian (Eli Qiao) - Disable numactl on ARM architectures too (Daniel P. Berrange) - Add libvirt confdir to files section in mingw32 spec (Daniel P. Berrange) - build: fix mingw build of gnulib openpty (Eric Blake) Bug Fixes: - Fix updating of haveTheBuck in RPC client to be race-free (Daniel P. Berrange) - Prevent crash of libvirtd when attaching to existing qemu process (Jim Fehlig) - qemu: Ignore shutdown event from destroyed domain (Jiri Denemark) - remote_driver: don't fail if keepalive check fails (Guido Günther) - command: handle empty buffer argument correctly (Eric Blake) - client: Check if other thread claims it has the buck before claiming it. (Peter Krempa) - Avoid crash in shunloadtest (Daniel P. Berrange) - Fix a logic error for setting block I/O (Lei Li) - virsh: Allow other escape characters for console (Michal Privoznik) - bridge_driver: Don't define network if XML contains more IPv4 adreses. (Peter Krempa) - virsh: Fix possible deadlock when virsh is about to exit (Jiri Denemark) - util: Plug memory leak on virNetDevMacVLanCreateWithVPortProfile() error path (Alex Jia) - util: Plug memory leak on virNetDevBridgeGet() sucessful path (Alex Jia) - uml: Plug memory leak on umlStartVMDaemon() error path (Alex Jia) - rpc: Plug memory leak on virNetClientSendInternal() error path (Alex Jia) - conf: Plug memory leak on virDomainDefParseXML() error path (Alex Jia) - qemu: Plug memory leak onqemuProcessWaitForMonitor() error path (Alex Jia) - conf: reject duplicate paths in device weights (Eric Blake) - Make logging async signal safe wrt time stamp generation (Daniel P. Berrange) - Don't mark suspend as active until we know it is running (Daniel P. Berrange) - util: avoid null deref on qcowXGetBackingStore (Alex Jia) - virsh: correct return value error (Alex Jia) - qemu: fix blkiotune --live --config (Eric Blake) - lxc: Fix suspend/resume with freezer cgroup (Jiri Denemark) - rpc: Really send non-blocking calls while waiting for another call (Jiri Denemark) - util: fix thinko in runIO (Paolo Bonzini) - storage: Skip socket and fifo on pool-start (Michal Privoznik) - conf: Don't drop console definition on domain restart (Michal Privoznik) - qemu: Avoid dereference of NULL pointer (Peter Krempa) - nwfilter: Initialize virNWFilterAddIpAddrForIfname return variable (Michal Privoznik) - Fix disabling of virtual port profile code on old hosts (Daniel P. Berrange) - Fix uninitialized variable in NWfilter IP learning code (Daniel P. Berrange) - storage: Fallback to use lvchange first if lvremove fails (Chang Liu) - conf: don't modify cpu set string during parsing (Eric Blake) - qemu: don't release network actual device twice (Roopa Prabhu) - tests: avoid xend ABRT crash report (Eric Blake) - Fix use of uninitialized variable in QEMU driver (Daniel P. Berrange) - snapshot: refuse to generate names for non-regular backing files (Eric Blake) - fix a bug in remoteSerializeTypedParameters (Hu Tao) - Don't return a fatal error if receiving unexpected stream data (Daniel P. Berrange) - Fix handling of stream EOF (Daniel P. Berrange) - storage: forbid rebuilding existing disk storage pools (Guido Günther) - qemu: fix domjobabort regression (Eric Blake) - fix two bugs in bridge_driver.c (Hu Tao) - nwfilter: avoid failure with noexec /tmp (Eric Blake) - lxc: free error object to avoid memory leak (Alex Jia) - lxc: free 'ttyFDs' array on return from lxcVmStart (Alex Jia) Improvements: - npiv: Expose fabric_name outside (Osier Yang) - Improve error reporting when libvirtd is not installed (Daniel P. Berrange) - spec: fix sanlock dependency (Eric Blake) - spec: add dmidecode as prereq (Eric Blake) - examples: Update event tests for shutdown event (Jiri Denemark) - qemu: Rework handling of shutdown event (Jiri Denemark) - python: Expose binding for virNodeGetMemoryStats() (Peter Krempa) - python: Expose binding for virNodeGetCPUStats() (Peter Krempa) - build: require more tools from maintainers (Eric Blake) - apparmor: allow tunnelled migrations. (Serge Hallyn) - Update of filters to handle multiple IP addresses (Stefan Berger) - build: update to latest gnulib (Eric Blake) - build: properly skip tests (Eric Blake) - spec: mark directories in /var/run as ghosts (Eric Blake) - qemu: filter blkio 0-device-weight at two other places (Hu Tao) - qemu: amend existing table of device weights (Eric Blake) - virsh: fix setting weight and device-weights at the same time (Hu Tao) - Add tests for blkdeviotune (Lei Li) - Support virDomain{Set, Get}BlockIoTune in the python API (Lei Li) - Enable the blkdeviotune command in virsh (Lei Li) - Implement virDomain{Set, Get}BlockIoTune for the qemu driver (Lei Li) - Support block I/O throttle in XML (Lei Li) - Add virDomain{Set, Get}BlockIoTune support to the remote driver (Lei Li) - Fix leak build config file path (Daniel P. Berrange) - Add internal APIs for dealing with time (Daniel P. Berrange) - Remove obsolete virGetPMCapabilities sym from private symbols file (Daniel P. Berrange) - Add suspend info to Xen, LXC and UML hypervisor capabilities (Daniel P. Berrange) - Remove pointless strdup in node suspend code (Daniel P. Berrange) - Do lazy init of host PM features (Daniel P. Berrange) - Remove powerMgmt_valid field from capabilities struct (Daniel P. Berrange) - Add export of node suspend capabilities APIs (Daniel P. Berrange) - Move suspend capabilities APIs out of util.h into virnodesuspend.c (Daniel P. Berrange) - Rename suspend capabilities APIs (Daniel P. Berrange) - Sanitize virDiscoverHostPMFeature to return a boolean (Daniel P. Berrange) - Move the virHostPMCapability enum helpers into capabilities.c (Daniel P. Berrange) - Fix capabilities XML to use generic terms for suspend targets (Daniel P. Berrange) - Remove internal only virHostPMCapability enum (Daniel P. Berrange) - Fix values of PM target type constants (Daniel P. Berrange) - blkiotune: add qemu support for blkiotune.device_weight (Hu Tao) - blkiotune: add interface for blkiotune.device_weight (Hu Tao) - qemu, lxc: drop redundant checks (Eric Blake) - API: prevent query of --live and --config at once (Eric Blake) - build: fix typo in last patch (Eric Blake) - block_resize: Update test file for RPC (Osier Yang) - block_resize: Expose the new API to virsh (Osier Yang) - block_resize: Implement qemu driver method (Osier Yang) - block_resize: Implement qemu monitor functions (Osier Yang) - block_resize: Wire up the remote protocol (Osier Yang) - examples: Correct the example command to use testnode.xml (Osier Yang) - Add virsh command to initiate suspend on the host (Srivatsa S. Bhat) - Implement the core API to suspend/resume the host (Srivatsa S. Bhat) - Add the remote protocol implementation for virNodeSuspendForDuration (Srivatsa S. Bhat) - Add 'Hybrid-Suspend' power management discovery for the host (Srivatsa S. Bhat) - virsh: Don't traverse childless nodes in vshNodeIsSuperset (Michal Privoznik) - conf: make virt-xml-validate work with vbox domains (Lorin Hochstein) - conf: Improve incorrect root element error messages (Michal Privoznik) - Refactor initial LXC mem tune / device ACL code (Daniel P. Berrange) - Add support for blkio tuning of LXC containers (Daniel P. Berrange) - Add support for CPU quota/period to LXC driver (Daniel P. Berrange) - Support CPU placement in LXC driver (Daniel P. Berrange) - Support NUMA memory placement for LXC containers (Daniel P. Berrange) - storage: Refetch file status after open (Michal Privoznik) - Fix version numbers for isAlive and setKeepAlive driver APIs (Jiri Denemark) - build: Properly generate and check virkeepaliveprotocol-structs (Jiri Denemark) - examples: Use virConnectOpenAuth in events-c (Jiri Denemark) - qemu: Cancel p2p migration when connection breaks (Jiri Denemark) - qemu: Add support for keepalive messages during p2p migration (Jiri Denemark) - Add keepalive support into domain-events examples (Jiri Denemark) - Implement virConnectIsAlive in all drivers (Jiri Denemark) - Introduce virConnectIsAlive API (Jiri Denemark) - Implement keepalive protocol in remote driver (Jiri Denemark) - Add support for async close of client RPC socket (Jiri Denemark) - Implement keepalive protocol in libvirt daemon (Jiri Denemark) - virsh: Always run event loop (Jiri Denemark) - Introduce virConnectSetKeepAlive (Jiri Denemark) - Implement common keepalive handling (Jiri Denemark) - rpc: Add some debug messages to virNetClient (Jiri Denemark) - rpc: Fix handling of non-blocking calls that could not be sent (Jiri Denemark) - rpc: Pass the buck only to the first available thread (Jiri Denemark) - nwfilter: remove virConnectPtr from internal API calls (Stefan Berger) - API: prefer 'disk' over 'block' or 'path' (Eric Blake) - blockstats: support lookup by path in blockstats (Eric Blake) - virsh: Increase device-detach intelligence (Michal Prívozník) - Enable detection of multiple IP addresses (Stefan Berger) - fix error message when using wrong URI alias (Eli Qiao) - Pass additional parameter into applyDHCPOnly function (Stefan Berger) - nwfilter: use shell variable to invoke 'ip(6)tables' command (Stefan Berger) - nwfilter: use shell variable to invoke 'ebtables' command (Stefan Berger) - Improve error reporting of failures to apply filtering rules (Stefan Berger) - Add documentation for STP filtering support (Stefan Berger) - Add test cases for STP traffic filtering (Stefan Berger) - Add a 'mac' chain (Stefan Berger) - Add strings.h include to capabilities.h for ffs() function prototype (Daniel P. Berrange) - build: Update AUTHORS (Osier Yang) - Export KVM Host Power Management capabilities (Srivatsa S. Bhat) - qemu: Copy console definition from serial (Michal Privoznik) - storage: Skips backingStore of virtual snapshot lv (Osier Yang) - Add documentation for VLAN filtering support (Stefan Berger) - Add test cases for VLAN traffic filtering (Stefan Berger) - Don't copy sexpr node value that is an empty string (Jim Fehlig) - enable cgroup cpuset by default (Hu Tao) - tests: test recent hash addition (Eric Blake) - Add test cases for parsing of list values (Stefan Berger) - Extend NWFilter parameter parser to cope with lists of values (Stefan Berger) - Create rules for each member of a list (Stefan Berger) - Rework value part of name-value pairs (Stefan Berger) - Add test cases (Stefan Berger) - Interleave jumping into chains with filtering rules in 'root' table (Stefan Berger) - Extend rule priorities into negative numbers (Stefan Berger) - Enable chains with names having a known prefix (Stefan Berger) - Extend the filter XML to support priorities of chains (Stefan Berger) - Use the actual names of chains in data structure (Stefan Berger) - Use scripting for cleaning and renaming of chains (Stefan Berger) - Make filter creation in root table more flexible (Stefan Berger) - Introduce an internal priority for chains (Stefan Berger) - Add function to get hash table's key/value pairs (Stefan Berger) - Add support for systemd init service (Daniel P. Berrange) - Add support for interfaces with type=direct to LXC (Daniel P. Berrange) - Allow creation of plain macvlan devices (Daniel P. Berrange) - Refactor LXC network setup to allow future enhancements (Daniel P. Berrange) - Add missing 'const' annotations for internal domain conf helpers (Daniel P. Berrange) - qemu: Generate -numa option (Bharata B Rao) - XML definitions for guest NUMA and parsing routines (Bharata B Rao) - virsh: add iface-bridge and iface-unbridge commands (Laine Stump) - Allow non-blocking message sending on virNetClient (Daniel P. Berrange) - Refactor code for enabling/disabling I/O callback in remote client (Daniel P. Berrange) - Split virNetClientSend into 2 methods (Daniel P. Berrange) - Refactor code for passing the buck in the remote client (Daniel P. Berrange) - Explicitly track whether the buck is held in remote client (Daniel P. Berrange) - Remove all linked list handling from remote client event loop (Daniel P. Berrange) - util: Add netdev helper functions to private symbols (Eli Qiao) - qemu/rbd: improve rbd device specification (Sage Weil) - maint: fix build (Stefan Berger) - Fix error reporting in port profile parsing/formatting APIs (Daniel P. Berrange) - API: add trivial qemu support for VIR_TYPED_PARAM_STRING (Eric Blake) - API: remote support for VIR_TYPED_PARAM_STRING (Eric Blake) - API: add VIR_TYPED_PARAM_STRING (Eric Blake) - maint: use mailmap, not AUTHORS, for secondary addresses (Eric Blake) - maint: fix make syntax-check (Stefan Berger) - nwfilter: simplify execution of ebiptables scripts (Eric Blake) - Remove usage of brctl command line tool (Daniel P. Berrange) - Add an API for retrieving the MAC address of an interface (Daniel P. Berrange) - Expose MTU management APIs (Daniel P. Berrange) - Turn two int parameters into bools in bridge APIs (Daniel P. Berrange) - Make all brXXX APIs raise errors, instead of returning errnos (Daniel P. Berrange) - build: allow for local gnulib diffs (Eric Blake) - qemu: Fix improper error message for disk detaching (Osier Yang) - virsh: Add VSH_OFLAG_EMPTY_OK for attach-disk command (Xu He Jie) Cleanups: - Remove time APIs from src/util/util.h (Daniel P. Berrange) - bandwidth: Fix funky identation (Michal Privoznik) - qemu: fix a const-correctness issue (Eric Blake) - build: fix accidental POTFILES.in regression (Eric Blake) - Fix up ordering of private symbols file (Daniel P. Berrange) - Move ifaceMacvtapLinkDump and ifaceGetNthParent functions (Daniel P. Berrange) - Move functions for dealing with physical/virtual devices (Daniel P. Berrange) - Rename APIs for dealing with virtual/physical functions (Daniel P. Berrange) - Move virNetDevValidateConfig to virnetdev.c (Daniel P. Berrange) - Rename ifaceCheck to virNetDevValidateConfig (Daniel P. Berrange) - Move virNetDevGetIPv4Address to virnetdev.c (Daniel P. Berrange) - Rename ifaceGetIPAddress to virNetDevGetIPv4Address (Daniel P. Berrange) - Move virNetDevGetIndex & virNetDevGetVLanID to virnetdev.c (Daniel P. Berrange) - Rename ifaceGetIndex and ifaceGetVLAN (Daniel P. Berrange) - Move MAC address replacement functions to virnetdev.c (Daniel P. Berrange) - Rename interface MAC address replacement APIs (Daniel P. Berrange) - Move the low level macvlan creation APIs (Daniel P. Berrange) - Rename low level macvlan creation APIs (Daniel P. Berrange) - Rename high level macvlan creation APIs (Daniel P. Berrange) - Rename and split the macvtap.c file (Daniel P. Berrange) - Rename Macvtap management APIs (Daniel P. Berrange) - Remove ifaceSetMac and ifaceGetMac APIs (Daniel P. Berrange) - Remove ifaceUp, ifaceDown, ifaceCtrl & ifaceIsUp APIs (Daniel P. Berrange) - Move LXC veth.c code into shared utility APIs (Daniel P. Berrange) - Rename the LXC veth management APIs and delete duplicated APIs (Daniel P. Berrange) - Split src/util/network.{c,h} into 5 pieces (Daniel P. Berrange) - Rename virVirtualPortProfileParams & APIs (Daniel P. Berrange) - build: drop useless dirent.h includes (Eric Blake) - xenapi: remove unused variable (Eric Blake) - Remove code instantiating filters on direct interfaces (Stefan Berger) - Adjust naming of network device bandwidth management APIs (Daniel P. Berrange) - Santize naming of socket address APIs (Daniel P. Berrange) - Split bridge.h into three separate files (Daniel P. Berrange) - Rename all brXXXX APIs to follow new convention (Daniel P. Berrange) - Remove 'brControl' object (Daniel P. Berrange) Thanks again to everybody who contributed to this release, with patches, ideas, documentation or reporting issues ! Let's not forget the translation teams at transifex [1] with special kudos for ukainian who have 100% complete localization if I believe transifex statistics :-) Daniel [1] https://www.transifex.net/projects/p/libvirt/resource/strings/ -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

3 2

Re: [libvirt] virsh console giving Error
by Amit Tewari 13 Dec '11

13 Dec '11

Hi, I am using libvirt 0.9.7 -----Original Message----- From: Kashyap Chamarthy [mailto:kchamart@redhat.com] Sent: Monday, December 12, 2011 12:32 PM To: Amit Tewari Cc: libvir-list(a)redhat.com Subject: Re: [libvirt] virsh console giving Error On 12/12/2011 12:16 PM, Amit Tewari wrote: > Hi all, > > Following is my test environment > > Host os= rhel6.1 > > Guest os=rhel6.1 > > Hypervisor - kvm > > > > I have a created a guest machine using virt-install command. And it has created guest > successfully. > > But now when I issue following command > > #virsh console guest > > > > Following error is displayed - > > > > "Error: internal error character device (null) is not using a PTY" > > > > Please let me no how can I avoid this error. You have not specified what distribution, version of libvirt are you using. First, can you ensure if you have serial console set up in your guest by checking if you have the below directives in your guest kernel's command line options (in /etc/grub.conf) ---- console=tty0 console=ttyS0,115200 ---- If not, you can add it by running the below (ensure the guest is shut-off): # virt-edit guest /etc/grub.conf 'virt-edit' tool comes with libguestfs-tools-c package. -- /kashyap > > > > Regards > > Amit Tewari > > > > -- > libvir-list mailing list > libvir-list(a)redhat.com > https://www.redhat.com/mailman/listinfo/libvir-list DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

4 3

[libvirt] make uninstall fails
by Dave Allan 13 Dec '11

13 Dec '11

Hey all, I just noticed that make uninstall from the git HEAD fails: rmdir /etc/sasl2/ rmdir: failed to remove `/etc/sasl2/': Directory not empty it's correct that /etc/sasl2 should not be removed, as it has other files in it, so I think this removal should be more targeted, although I haven't investigated what should be removed when uninstalling. Dave

4 5

[libvirt] [PATCH] qemu: Disable EOF processing during qemuDomainDestroy
by Jiri Denemark 13 Dec '11

13 Dec '11

When destroying a domain qemuDomainDestroy kills its qemu process and starts a new job, which means it unlocks the domain object and locks it again after some time. Although the object is usually unlocked for a pretty short time, chances are another thread processing an EOF event on qemu monitor is able to lock the object first and does all the cleanup by itself. This leads to wrong shutoff reason and lifecycle event detail and virDomainDestroy API incorrectly reporting failure to destroy an inactive domain. Reported by Charlie Smurthwaite. --- src/qemu/qemu_domain.h | 1 + src/qemu/qemu_driver.c | 10 ++++++++++ src/qemu/qemu_process.c | 22 +++++++++++++++------- 3 files changed, 26 insertions(+), 7 deletions(-) diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h index e8bcab3..35f9440 100644 --- a/src/qemu/qemu_domain.h +++ b/src/qemu/qemu_domain.h @@ -110,6 +110,7 @@ struct _qemuDomainObjPrivate { bool monError; unsigned long long monStart; bool gotShutdown; + bool beingDestroyed; char *pidfile; int nvcpupids; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 10a289e..ceb9f47 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -1678,6 +1678,7 @@ qemuDomainDestroyFlags(virDomainPtr dom, virDomainObjPtr vm; int ret = -1; virDomainEventPtr event = NULL; + qemuDomainObjPrivatePtr priv; virCheckFlags(0, -1); @@ -1691,6 +1692,8 @@ qemuDomainDestroyFlags(virDomainPtr dom, goto cleanup; } + priv = vm->privateData; + qemuDomainSetFakeReboot(driver, vm, false); /* Although qemuProcessStop does this already, there may @@ -1700,9 +1703,16 @@ qemuDomainDestroyFlags(virDomainPtr dom, */ qemuProcessKill(vm, false); + /* We need to prevent monitor EOF callback from doing our work (and sending + * misleading events) while the vm is unlocked inside BeginJob API + */ + priv->beingDestroyed = true; + if (qemuDomainObjBeginJobWithDriver(driver, vm, QEMU_JOB_DESTROY) < 0) goto cleanup; + priv->beingDestroyed = false; + if (!virDomainObjIsActive(vm)) { qemuReportError(VIR_ERR_OPERATION_INVALID, "%s", _("domain is not running")); diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index d4271d0..9123f4c 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -128,14 +128,18 @@ qemuProcessHandleMonitorEOF(qemuMonitorPtr mon ATTRIBUTE_UNUSED, qemuDriverLock(driver); virDomainObjLock(vm); + priv = vm->privateData; + + if (priv->beingDestroyed) { + VIR_DEBUG("Domain is being destroyed, EOF is expected"); + goto unlock; + } + if (!virDomainObjIsActive(vm)) { VIR_DEBUG("Domain %p is not active, ignoring EOF", vm); - virDomainObjUnlock(vm); - qemuDriverUnlock(driver); - return; + goto unlock; } - priv = vm->privateData; if (priv->monJSON && !priv->gotShutdown) { VIR_DEBUG("Monitor connection to '%s' closed without SHUTDOWN event; " "assuming the domain crashed", vm->def->name); @@ -150,11 +154,15 @@ qemuProcessHandleMonitorEOF(qemuMonitorPtr mon ATTRIBUTE_UNUSED, qemuProcessStop(driver, vm, 0, stopReason); virDomainAuditStop(vm, auditReason); - if (!vm->persistent) + if (!vm->persistent) { qemuDomainRemoveInactive(driver, vm); - else - virDomainObjUnlock(vm); + goto cleanup; + } +unlock: + virDomainObjUnlock(vm); + +cleanup: if (event) qemuDomainEventQueue(driver, event); qemuDriverUnlock(driver); -- 1.7.8

2 2

[libvirt] [libvirt-glib 1/2] Fix gvir_config_domain_disk_set_target_bus API
by Christophe Fergeau 13 Dec '11

13 Dec '11

The bus type is actually an enum, let's reflect that in libvirt-gconfig API --- libvirt-gconfig/libvirt-gconfig-domain-disk.c | 8 ++++++-- libvirt-gconfig/libvirt-gconfig-domain-disk.h | 13 ++++++++++++- libvirt-gconfig/libvirt-gconfig.sym | 1 + libvirt-gconfig/tests/test-domain-create.c | 2 +- 4 files changed, 20 insertions(+), 4 deletions(-) diff --git a/libvirt-gconfig/libvirt-gconfig-domain-disk.c b/libvirt-gconfig/libvirt-gconfig-domain-disk.c index 502cf43..b52f4a5 100644 --- a/libvirt-gconfig/libvirt-gconfig-domain-disk.c +++ b/libvirt-gconfig/libvirt-gconfig-domain-disk.c @@ -159,14 +159,18 @@ void gvir_config_domain_disk_set_driver_type(GVirConfigDomainDisk *disk, } void gvir_config_domain_disk_set_target_bus(GVirConfigDomainDisk *disk, - const char *bus) + GVirConfigDomainDiskBus bus) { GVirConfigObject *node; g_return_if_fail(GVIR_IS_CONFIG_DOMAIN_DISK(disk)); node = gvir_config_object_add_child(GVIR_CONFIG_OBJECT(disk), "target"); g_return_if_fail(GVIR_IS_CONFIG_OBJECT(node)); - gvir_config_object_set_attribute(node, "bus", bus, NULL); + gvir_config_object_set_attribute_with_type(node, + "bus", + GVIR_TYPE_CONFIG_DOMAIN_DISK_BUS, + bus, + NULL); g_object_unref(G_OBJECT(node)); } diff --git a/libvirt-gconfig/libvirt-gconfig-domain-disk.h b/libvirt-gconfig/libvirt-gconfig-domain-disk.h index b90b2bc..bc63dfe 100644 --- a/libvirt-gconfig/libvirt-gconfig-domain-disk.h +++ b/libvirt-gconfig/libvirt-gconfig-domain-disk.h @@ -64,6 +64,17 @@ typedef enum { } GVirConfigDomainDiskType; typedef enum { + GVIR_CONFIG_DOMAIN_DISK_BUS_IDE, + GVIR_CONFIG_DOMAIN_DISK_BUS_FDC, + GVIR_CONFIG_DOMAIN_DISK_BUS_SCSI, + GVIR_CONFIG_DOMAIN_DISK_BUS_VIRTIO, + GVIR_CONFIG_DOMAIN_DISK_BUS_XEN, + GVIR_CONFIG_DOMAIN_DISK_BUS_USB, + GVIR_CONFIG_DOMAIN_DISK_BUS_UML, + GVIR_CONFIG_DOMAIN_DISK_BUS_SATA +} GVirConfigDomainDiskBus; + +typedef enum { GVIR_CONFIG_DOMAIN_DISK_GUEST_DEVICE_DISK, GVIR_CONFIG_DOMAIN_DISK_GUEST_DEVICE_FLOPPY, GVIR_CONFIG_DOMAIN_DISK_GUEST_DEVICE_CDROM @@ -94,7 +105,7 @@ void gvir_config_domain_disk_set_driver_name(GVirConfigDomainDisk *disk, void gvir_config_domain_disk_set_driver_type(GVirConfigDomainDisk *disk, const char *driver_type); void gvir_config_domain_disk_set_target_bus(GVirConfigDomainDisk *disk, - const char *bus); + GVirConfigDomainDiskBus bus); void gvir_config_domain_disk_set_target_dev(GVirConfigDomainDisk *disk, const char *dev); G_END_DECLS diff --git a/libvirt-gconfig/libvirt-gconfig.sym b/libvirt-gconfig/libvirt-gconfig.sym index 6adc2c2..d0c35d2 100644 --- a/libvirt-gconfig/libvirt-gconfig.sym +++ b/libvirt-gconfig/libvirt-gconfig.sym @@ -54,6 +54,7 @@ LIBVIRT_GCONFIG_0.0.1 { gvir_config_domain_device_get_type; gvir_config_domain_disk_get_type; + gvir_config_domain_disk_bus_get_type; gvir_config_domain_disk_guest_device_type_get_type; gvir_config_domain_disk_snapshot_type_get_type; gvir_config_domain_disk_type_get_type; diff --git a/libvirt-gconfig/tests/test-domain-create.c b/libvirt-gconfig/tests/test-domain-create.c index 42aa09b..ea3a3ea 100644 --- a/libvirt-gconfig/tests/test-domain-create.c +++ b/libvirt-gconfig/tests/test-domain-create.c @@ -100,7 +100,7 @@ int main(void) gvir_config_domain_disk_set_source(disk, "/tmp/foo/bar"); gvir_config_domain_disk_set_driver_name(disk, "qemu"); gvir_config_domain_disk_set_driver_type(disk, "qcow2"); - gvir_config_domain_disk_set_target_bus(disk, "ide"); + gvir_config_domain_disk_set_target_bus(disk, GVIR_CONFIG_DOMAIN_DISK_BUS_IDE); gvir_config_domain_disk_set_target_dev(disk, "hda"); devices = g_list_append(devices, GVIR_CONFIG_DOMAIN_DEVICE(disk)); -- 1.7.7.3

2 3

[libvirt] Expand GVirConfigDomainInterface a bit
by Christophe Fergeau 13 Dec '11

13 Dec '11

Hi, This patch series add setters for the GVirConfigDomainInterface properties which are common to all classes deriving from GVirConfigDomainInterface. It also adds GVirConfigDomainInterfaceUser so that it's possible to create <interface type="user"> nodes. Christophe

2 3