- Devel - libvirt List Archives

[libvirt] Interface pools and passthrough mode (issue to discuss)
by Shradha Shah 08 Dec '11

08 Dec '11

Hello All, While working on my patches I came across an issue which I would like to discuss with everybody. The definition of passthrough mode in the Network XML Format document says that, in passthrough mode each physical interface can only be in use by a single guest interface at a time. Consider the scenario where we a single KVM host: We can define 2 network configurations, one that uses vepa and other that uses passthrough mode with the same interface pool. # virsh net-define vepa_network.xml # virsh net-define passthrough-network.xml Examples: <network> <name>vepa-network</name> <uuid>81ff9090-c91e-6742-64da-4a736edb9a8f</uuid> <forward mode="vepa"> <interface dev="eth10"/> <interface dev="eth11"/> <interface dev="eth12"/> </forward> </network> <network> <name>passthrough-network</name> <uuid>81ff9090-c91e-6742-64da-4a736edb9a88</uuid> <forward mode="passthrough"> <interface dev="eth10"/> <interface dev="eth11"/> <interface dev="eth12"/> </forward> </network> Suppose we use the vepa-network for guest1 and passthrough network for guest2. Examples: Guest 1: (snippet of xml) <interface type='network'> <source network='vepa-network'/> <mac address='00:50:56:0e:86:3b'/> <actual type='direct'> <source mode='vepa'/> </actual> </interface> Guest2: (snippet of xml) <interface type='network'> <source network='passthrough-network'/> <mac address='00:50:56:0e:86:4b'/> <actual type='direct'> <source mode='passthrough'/> </actual> </interface> # virsh define guest1.xml # virsh define guest2.xml # virsh start guest1 # virsh start guest2 Since the virNetworkDef is different for the two network configs, how does libvirt keep track of the interfaces in use at this point? Wouldn't libvirt use the first free interface in both cases which will be eth10 since the usageCount will be zero in both cases start of day? Many Thanks, Regards, Shradha Shah

2 2

[libvirt] Fwd: I DID IT!
by dasari dakshina 08 Dec '11

08 Dec '11

<p>hey<br>i couldn't have asked for such a great opportunity to economic fortune<br><a href="http://brushouse.com/profile/56StephenMorgan/">http://brushouse.com/profile/56StephenMorgan/</a><br>see you later</p>

1 0

[libvirt] [PATCH] build: fix build with older libxml2
by Eric Blake 08 Dec '11

08 Dec '11

On RHEL 5, with libxml2-2.6.26, the build failed with: virsh.c: In function 'vshNodeIsSuperset': virsh.c:11951: warning: implicit declaration of function 'xmlChildElementCount' (or if warnings aren't errors, a link failure later on). * src/util/xml.h (virXMLChildElementCount): New prototype. * src/util/xml.c (virXMLChildElementCount): New function. * src/libvirt_private.syms (xml.h): Export it. * tools/virsh.c (vshNodeIsSuperset): Use it. --- I haven't decided yet whether this is trivial enough to push under the build-breaker rule, but it did fix my build on RHEL 5. src/libvirt_private.syms | 1 + src/util/xml.c | 20 ++++++++++++++++++++ src/util/xml.h | 1 + tools/virsh.c | 9 +++++---- 4 files changed, 27 insertions(+), 4 deletions(-) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 99a1099..a81c230 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1400,6 +1400,7 @@ virTimeStringThenRaw; # xml.h +virXMLChildElementCount; virXMLParseHelper; virXMLPropString; virXMLSaveFile; diff --git a/src/util/xml.c b/src/util/xml.c index 4e98b05..2909e85 100644 --- a/src/util/xml.c +++ b/src/util/xml.c @@ -833,3 +833,23 @@ virXMLSaveFile(const char *path, return virFileRewrite(path, S_IRUSR | S_IWUSR, virXMLRewriteFile, &data); } + +/* Returns the number of children of node, or -1 on error. */ +long +virXMLChildElementCount(xmlNodePtr node) +{ + long ret = 0; + xmlNodePtr cur = NULL; + + /* xmlChildElementCount returns 0 on error, which isn't helpful; + * besides, it is not available in libxml2 2.6. */ + if (!node || node->type != XML_ELEMENT_NODE) + return -1; + cur = node->children; + while (cur) { + if (cur->type == XML_ELEMENT_NODE) + ret++; + cur = cur->next; + } + return ret; +} diff --git a/src/util/xml.h b/src/util/xml.h index c492063..a3750fa 100644 --- a/src/util/xml.h +++ b/src/util/xml.h @@ -52,6 +52,7 @@ int virXPathNodeSet(const char *xpath, xmlNodePtr **list); char * virXMLPropString(xmlNodePtr node, const char *name); +long virXMLChildElementCount(xmlNodePtr node); /* Internal function; prefer the macros below. */ xmlDocPtr virXMLParseHelper(int domcode, diff --git a/tools/virsh.c b/tools/virsh.c index d02be5c..a51478f 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -11919,7 +11919,7 @@ vshNodeIsSuperset(xmlNodePtr n1, xmlNodePtr n2) bool found; bool visited; bool ret = false; - unsigned long n1_child_size, n2_child_size, n1_iter; + long n1_child_size, n2_child_size, n1_iter; virBitmapPtr bitmap; if (!n1 && !n2) @@ -11948,9 +11948,10 @@ vshNodeIsSuperset(xmlNodePtr n1, xmlNodePtr n2) attr = attr->next; } - n1_child_size = xmlChildElementCount(n1); - n2_child_size = xmlChildElementCount(n2); - if (n1_child_size < n2_child_size) + n1_child_size = virXMLChildElementCount(n1); + n2_child_size = virXMLChildElementCount(n2); + if (n1_child_size < 0 || n2_child_size < 0 || + n1_child_size < n2_child_size) return false; if (n1_child_size == 0 && n2_child_size == 0) -- 1.7.7.3

2 1

[libvirt] [PATCH 1/2] maint: use common xml quoting style
by Eric Blake 08 Dec '11

08 Dec '11

According to the official XML specification [1], attributes can be specified with either ' or " (where the difference is that you can use '"' or '"' but must use """, and conversely for "'" or "'" vs. '''). But our code generation in src/conf prefers to output the '' notation, as it is easier to write C string literals for that style. Using a consistent style throughout libvirt will make it easier for users to copy-and-paste without wondering why we switch quoting styles mid-stream. [1] http://www.w3.org/TR/xml11/#NT-Reference Mechanical conversion done with: $ find -name '*.xml' | \ xargs sed -i 's/$[a-zA-Z0-9_]*=$"$[^"]*$"/\1'\''\2'\''/g' followed by inspecting the results, and touching up the change in tests/xml2sexprdata/xml2sexpr-escape.xml to fix 'make check'. * cfg.mk (sc_rng_quote_style): Enforce the rule. * examples/xml/storage/*.xml: Fix fallout. * examples/xml/test/*.xml: Likewise. * python/libvirt-*override-api.xml: Likewise. * src/network/default.xml: Likewise. * tests/*/*.xml: Likewise. --- cfg.mk | 7 ++ examples/xml/storage/pool-dir.xml | 2 +- examples/xml/storage/pool-fs.xml | 4 +- examples/xml/storage/pool-logical.xml | 4 +- examples/xml/storage/pool-netfs.xml | 6 +- examples/xml/storage/vol-cow.xml | 6 +- examples/xml/storage/vol-qcow.xml | 6 +- examples/xml/storage/vol-qcow2.xml | 6 +- examples/xml/storage/vol-raw.xml | 6 +- examples/xml/storage/vol-sparse.xml | 4 +- examples/xml/storage/vol-vmdk.xml | 6 +- examples/xml/test/testnode.xml | 14 ++-- examples/xml/test/testnodeinline.xml | 66 ++++++++++---------- python/libvirt-override-api.xml | 20 +++--- python/libvirt-qemu-override-api.xml | 2 +- src/network/default.xml | 6 +- .../networkxml2argvdata/nat-network-dns-hosts.xml | 2 +- tests/networkxml2xmlin/8021Qbh-net.xml | 16 +++--- tests/networkxml2xmlin/direct-net.xml | 4 +- tests/networkxml2xmlin/host-bridge-net.xml | 4 +- tests/networkxml2xmlin/isolated-network.xml | 6 +- tests/networkxml2xmlin/nat-network.xml | 20 +++--- tests/networkxml2xmlin/netboot-network.xml | 12 ++-- tests/networkxml2xmlin/netboot-proxy-network.xml | 10 ++-- tests/networkxml2xmlin/routed-network.xml | 6 +- tests/networkxml2xmlin/vepa-net.xml | 24 ++++---- tests/nwfilterxml2xmlin/stp-test.xml | 4 +- tests/qemuxml2argvdata/qemuxml2argv-cpu-numa1.xml | 6 +- tests/qemuxml2argvdata/qemuxml2argv-cpu-numa2.xml | 6 +- .../qemuxml2argv-cpu-topology1.xml | 2 +- .../qemuxml2argv-cpu-topology2.xml | 2 +- .../qemuxml2argv-cpu-topology3.xml | 2 +- .../qemuxml2argv-numatune-memory.xml | 2 +- tests/storagepoolxml2xmlin/pool-iscsi-auth.xml | 4 +- .../pool-iscsi-vendor-product.xml | 4 +- tests/storagepoolxml2xmlin/pool-iscsi.xml | 4 +- tests/storagepoolxml2xmlin/pool-logical-create.xml | 6 +- tests/storagepoolxml2xmlin/pool-mpath.xml | 2 +- tests/storagepoolxml2xmlin/pool-scsi.xml | 4 +- tests/storagevolxml2xmlin/vol-file.xml | 2 +- tests/storagevolxml2xmlin/vol-qcow2.xml | 2 +- tests/xml2sexprdata/xml2sexpr-bridge-ipaddr.xml | 12 ++-- tests/xml2sexprdata/xml2sexpr-disk-drv-blkback.xml | 2 +- .../xml2sexpr-disk-drv-blktap-qcow.xml | 2 +- .../xml2sexpr-disk-drv-blktap-raw.xml | 2 +- tests/xml2sexprdata/xml2sexpr-disk-drv-blktap.xml | 2 +- .../xml2sexpr-disk-drv-blktap2-raw.xml | 2 +- tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2.xml | 2 +- tests/xml2sexprdata/xml2sexpr-disk-drv-loop.xml | 2 +- tests/xml2sexprdata/xml2sexpr-escape.xml | 2 +- tests/xml2sexprdata/xml2sexpr-net-bridged.xml | 10 ++-- tests/xml2sexprdata/xml2sexpr-net-e1000.xml | 10 ++-- tests/xml2sexprdata/xml2sexpr-net-routed.xml | 12 ++-- tests/xml2sexprdata/xml2sexpr-pv-vfb-new-auto.xml | 2 +- tests/xml2sexprdata/xml2sexpr-pv-vfb-new.xml | 2 +- tests/xml2sexprdata/xml2sexpr-pv-vfb-orig.xml | 2 +- .../xml2vmxdata/xml2vmx-serial-network-client.xml | 4 +- .../xml2vmxdata/xml2vmx-serial-network-server.xml | 4 +- 58 files changed, 201 insertions(+), 194 deletions(-) diff --git a/cfg.mk b/cfg.mk index 817b5f3..c964c27 100644 --- a/cfg.mk +++ b/cfg.mk @@ -419,6 +419,13 @@ sc_TAB_in_indentation: halt='indent with space, not TAB, in C, sh, html, py, and RNG schemas' \ $(_sc_search_regexp) +# In xml files, prefer name='abc' over name="abc" +sc_rng_quote_style: + @prohibit='\b[-a-zA-Z0-9_]+="' \ + in_vc_files='\.(xml)$$' \ + halt='use name='\'val\'', not name="val", in xml' \ + $(_sc_search_regexp) + ctype_re = isalnum|isalpha|isascii|isblank|iscntrl|isdigit|isgraph|islower\ |isprint|ispunct|isspace|isupper|isxdigit|tolower|toupper diff --git a/examples/xml/storage/pool-dir.xml b/examples/xml/storage/pool-dir.xml index 47a3bfa..4c10792 100644 --- a/examples/xml/storage/pool-dir.xml +++ b/examples/xml/storage/pool-dir.xml @@ -1,4 +1,4 @@ -<pool type="dir"> +<pool type='dir'> <name>virtimages</name> <target> <path>/var/lib/virt/images</path> diff --git a/examples/xml/storage/pool-fs.xml b/examples/xml/storage/pool-fs.xml index b0417d9..c8037f9 100644 --- a/examples/xml/storage/pool-fs.xml +++ b/examples/xml/storage/pool-fs.xml @@ -1,7 +1,7 @@ -<pool type="fs"> +<pool type='fs'> <name>virtimages</name> <source> - <device path="/dev/VolGroup00/VirtImages"/> + <device path='/dev/VolGroup00/VirtImages'/> </source> <target> <path>/var/lib/virt/images</path> diff --git a/examples/xml/storage/pool-logical.xml b/examples/xml/storage/pool-logical.xml index c33e903..16c34cb 100644 --- a/examples/xml/storage/pool-logical.xml +++ b/examples/xml/storage/pool-logical.xml @@ -1,7 +1,7 @@ -<pool type="logical"> +<pool type='logical'> <name>HostVG</name> <source> - <device path="/dev/sda1"/> + <device path='/dev/sda1'/> </source> <target> <path>/dev/HostVG</path> diff --git a/examples/xml/storage/pool-netfs.xml b/examples/xml/storage/pool-netfs.xml index d1df2e2..0585492 100644 --- a/examples/xml/storage/pool-netfs.xml +++ b/examples/xml/storage/pool-netfs.xml @@ -1,8 +1,8 @@ -<pool type="netfs"> +<pool type='netfs'> <name>virtimages</name> <source> - <host name="nfs.example.com"/> - <directory path="/var/lib/virt/images"/> + <host name='nfs.example.com'/> + <directory path='/var/lib/virt/images'/> </source> <target> <path>/var/lib/virt/images</path> diff --git a/examples/xml/storage/vol-cow.xml b/examples/xml/storage/vol-cow.xml index 1d80a01..e584362 100644 --- a/examples/xml/storage/vol-cow.xml +++ b/examples/xml/storage/vol-cow.xml @@ -1,10 +1,10 @@ -<volume type="file"> +<volume type='file'> <name>cow.img</name> <storage> <allocation>0</allocation> - <capacity unit="T">1</capacity> + <capacity unit='T'>1</capacity> </storage> <target> - <format type="cow"/> + <format type='cow'/> </target> </volume> diff --git a/examples/xml/storage/vol-qcow.xml b/examples/xml/storage/vol-qcow.xml index af2011d..879cfcd 100644 --- a/examples/xml/storage/vol-qcow.xml +++ b/examples/xml/storage/vol-qcow.xml @@ -1,10 +1,10 @@ -<volume type="file"> +<volume type='file'> <name>qcow.img</name> <storage> <allocation>0</allocation> - <capacity unit="T">1</capacity> + <capacity unit='T'>1</capacity> </storage> <target> - <format type="qcow"/> + <format type='qcow'/> </target> </volume> diff --git a/examples/xml/storage/vol-qcow2.xml b/examples/xml/storage/vol-qcow2.xml index 9d944a7..7d806f5 100644 --- a/examples/xml/storage/vol-qcow2.xml +++ b/examples/xml/storage/vol-qcow2.xml @@ -1,10 +1,10 @@ -<volume type="file"> +<volume type='file'> <name>qcow2.img</name> <storage> <allocation>0</allocation> - <capacity unit="T">1</capacity> + <capacity unit='T'>1</capacity> </storage> <target> - <format type="qcow2"/> + <format type='qcow2'/> </target> </volume> diff --git a/examples/xml/storage/vol-raw.xml b/examples/xml/storage/vol-raw.xml index 59d4b45..8b08090 100644 --- a/examples/xml/storage/vol-raw.xml +++ b/examples/xml/storage/vol-raw.xml @@ -1,7 +1,7 @@ -<volume type="file"> +<volume type='file'> <name>raw.img</name> <storage> - <allocation unit="M">10</allocation> - <capacity unit="M">1000</capacity> + <allocation unit='M'>10</allocation> + <capacity unit='M'>1000</capacity> </storage> </volume> diff --git a/examples/xml/storage/vol-sparse.xml b/examples/xml/storage/vol-sparse.xml index c529a49..40e286a 100644 --- a/examples/xml/storage/vol-sparse.xml +++ b/examples/xml/storage/vol-sparse.xml @@ -1,7 +1,7 @@ -<volume type="file"> +<volume type='file'> <name>sparse.img</name> <storage> <allocation>0</allocation> - <capacity unit="T">1</capacity> + <capacity unit='T'>1</capacity> </storage> </volume> diff --git a/examples/xml/storage/vol-vmdk.xml b/examples/xml/storage/vol-vmdk.xml index 5af0a84..2aa8e0b 100644 --- a/examples/xml/storage/vol-vmdk.xml +++ b/examples/xml/storage/vol-vmdk.xml @@ -1,10 +1,10 @@ -<volume type="file"> +<volume type='file'> <name>vmdk3.img</name> <storage> <allocation>0</allocation> - <capacity unit="T">1</capacity> + <capacity unit='T'>1</capacity> </storage> <target> - <format type="vmdk"/> + <format type='vmdk'/> </target> </volume> diff --git a/examples/xml/test/testnode.xml b/examples/xml/test/testnode.xml index 001e353..ad02da5 100644 --- a/examples/xml/test/testnode.xml +++ b/examples/xml/test/testnode.xml @@ -7,14 +7,14 @@ virsh -c test://absolute/path/to/this/dir/testnode.xml nodeinfo --> - <domain file="testdomfv0.xml"/> - <domain file="testdomfc4.xml"/> - <network file="testnetpriv.xml"/> - <network file="testnetdef.xml"/> - <pool file="testpool.xml"> - <volume file="testvol.xml"/> + <domain file='testdomfv0.xml'/> + <domain file='testdomfc4.xml'/> + <network file='testnetpriv.xml'/> + <network file='testnetdef.xml'/> + <pool file='testpool.xml'> + <volume file='testvol.xml'/> </pool> - <device file="testdev.xml"/> + <device file='testdev.xml'/> <cpu> <mhz>6000</mhz> diff --git a/examples/xml/test/testnodeinline.xml b/examples/xml/test/testnodeinline.xml index b353f39..2de8773 100644 --- a/examples/xml/test/testnodeinline.xml +++ b/examples/xml/test/testnodeinline.xml @@ -1,4 +1,4 @@ -<?xml version="1.0"?> +<?xml version='1.0'?> <node>  - <domain type="test"> + <domain type='test'> <name>fv0</name> <uuid>4dea22b31d52d8f32516782e98ab3fa0</uuid> <os> <type>hvm</type> <loader>/usr/lib/xen/boot/hvmloader</loader> - <boot dev="hd"/> + <boot dev='hd'/> </os> <memory>524288</memory> <maxMemory>1524288</maxMemory> @@ -29,28 +29,28 @@ </features> <devices> <emulator>/usr/lib/xen/bin/qemu-dm</emulator> - <interface type="bridge"> - <source bridge="xenbr0"/> - <mac address="00:16:3e:5d:c7:9e"/> - <script path="vif-bridge"/> + <interface type='bridge'> + <source bridge='xenbr0'/> + <mac address='00:16:3e:5d:c7:9e'/> + <script path='vif-bridge'/> </interface> - <disk type="file"> - <source file="/root/fv0"/> - <target dev="hda"/> + <disk type='file'> + <source file='/root/fv0'/> + <target dev='hda'/> </disk> - <disk type="file" device="cdrom"> - <source file="/root/fc5-x86_64-boot.iso"/> - <target dev="hdc"/> + <disk type='file' device='cdrom'> + <source file='/root/fc5-x86_64-boot.iso'/> + <target dev='hdc'/> <readonly/> </disk> - <disk type="file" device="floppy"> - <source file="/root/fd.img"/> - <target dev="fda"/> + <disk type='file' device='floppy'> + <source file='/root/fd.img'/> + <target dev='fda'/> </disk> - <graphics type="vnc" port="5904"/> + <graphics type='vnc' port='5904'/> </devices> </domain> - <domain type="test"> + <domain type='test'> <name>fc4</name> <uuid>EF86180145B911CB88E3AFBFE5370493</uuid> <os> @@ -64,36 +64,36 @@ <currentMemory>131072</currentMemory> <vcpu>1</vcpu> <devices> - <disk type="file"> - <source file="/u/fc4.img"/> - <target dev="sda1"/> + <disk type='file'> + <source file='/u/fc4.img'/> + <target dev='sda1'/> </disk> - <interface type="bridge"> - <source bridge="xenbr0"/> - <mac address="aa:00:00:00:00:11"/> - <script path="/etc/xen/scripts/vif-bridge"/> + <interface type='bridge'> + <source bridge='xenbr0'/> + <mac address='aa:00:00:00:00:11'/> + <script path='/etc/xen/scripts/vif-bridge'/> </interface> - <console tty="/dev/pts/5"/> + <console tty='/dev/pts/5'/> </devices> </domain> <network> <name>private</name> <uuid>004b22212d78c30f5aa5f03c87d21e69</uuid> - <bridge name="brpriv"/> - <ip address="192.168.124.1" netmask="255.255.255.0"> + <bridge name='brpriv'/> + <ip address='192.168.124.1' netmask='255.255.255.0'> <dhcp> - <range start="192.168.124.128" end="192.168.124.253"/> + <range start='192.168.124.128' end='192.168.124.253'/> </dhcp> </ip> </network> <network> <name>default</name> <uuid>004b96e12d78c30f5aa5f03c87d21e69</uuid> - <bridge name="brdefault"/> - <forward dev="eth0"/> - <ip address="192.168.122.1" netmask="255.255.255.0"> + <bridge name='brdefault'/> + <forward dev='eth0'/> + <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> - <range start="192.168.122.128" end="192.168.122.253"/> + <range start='192.168.122.128' end='192.168.122.253'/> </dhcp> </ip> </network> diff --git a/python/libvirt-override-api.xml b/python/libvirt-override-api.xml index 7c18763..1c78de4 100644 --- a/python/libvirt-override-api.xml +++ b/python/libvirt-override-api.xml @@ -1,20 +1,20 @@ -<?xml version="1.0"?> +<?xml version='1.0'?> <api name='libvir-python'> <symbols> - <function name="virConnectGetVersion" file='python'> + <function name='virConnectGetVersion' file='python'> <info>Returns the running hypervisor version of the connection host</info> <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/> - <return type='int' info="0 on success, -1 on error"/> + <return type='int' info='0 on success, -1 on error'/> </function> - <function name="virConnectGetLibVersion" file='python'> + <function name='virConnectGetLibVersion' file='python'> <info>Returns the libvirt version of the connection host</info> <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/> - <return type='int' info="0 on success, -1 on error"/> + <return type='int' info='0 on success, -1 on error'/> </function> - <function name="virConnectListDomainsID" file='python'> + <function name='virConnectListDomainsID' file='python'> <info>Returns the list of the ID of the domains on the hypervisor</info> <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/> - <return type='int *' info="the list of ID or None in case of error"/> + <return type='int *' info='the list of ID or None in case of error'/> </function> <function name='virConnectListDefinedDomains' file='python'> <info>list the defined domains, stores the pointers to the names in @names</info> @@ -160,12 +160,12 @@ <return type='virDomainMemoryStats' info='a dictionary of statistics'/> <arg name='domain' type='virDomainPtr' info='a domain object'/> </function> - <function name="virNodeGetCellsFreeMemory" file='python'> + <function name='virNodeGetCellsFreeMemory' file='python'> <info>Returns the available memory for a list of cells</info> <arg name='conn' type='virConnectPtr' info='pointer to the hypervisor connection'/> <arg name='startCell' type='int' info='first cell in the list'/> <arg name='maxCells' type='int' info='number of cell in the list'/> - <return type='int *' info="the list available memory in the cells"/> + <return type='int *' info='the list available memory in the cells'/> </function> <function name='virDomainGetSchedulerParameters' file='python'> <info>Get the scheduler parameters, the @params array will be filled with the values.</info> @@ -374,7 +374,7 @@ <arg name='dom' type='virDomainPtr' info='dummy domain pointer'/> <arg name='snap' type='virDomainSnapshotPtr' info='pointer to the snapshot'/> <arg name='flags' type='unsigned int' info='flags'/> - <return type='int' info="0 on success, -1 on error"/> + <return type='int' info='0 on success, -1 on error'/> </function> <function name='virDomainGetBlockJobInfo' file='python'> <info>Get progress information for a block job</info> diff --git a/python/libvirt-qemu-override-api.xml b/python/libvirt-qemu-override-api.xml index d69acea..d4bce23 100644 --- a/python/libvirt-qemu-override-api.xml +++ b/python/libvirt-qemu-override-api.xml @@ -1,4 +1,4 @@ -<?xml version="1.0"?> +<?xml version='1.0'?> <api name='libvir-qemu-python'> <symbols> <function name='virDomainQemuMonitorCommand' file='python-qemu'> diff --git a/src/network/default.xml b/src/network/default.xml index 9cfc01e..2c44f13 100644 --- a/src/network/default.xml +++ b/src/network/default.xml @@ -1,10 +1,10 @@ <network> <name>default</name> - <bridge name="virbr0" /> + <bridge name='virbr0' /> <forward/> - <ip address="192.168.122.1" netmask="255.255.255.0"> + <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> - <range start="192.168.122.2" end="192.168.122.254" /> + <range start='192.168.122.2' end='192.168.122.254' /> </dhcp> </ip> </network> diff --git a/tests/networkxml2argvdata/nat-network-dns-hosts.xml b/tests/networkxml2argvdata/nat-network-dns-hosts.xml index 2180a5d..cbde112 100644 --- a/tests/networkxml2argvdata/nat-network-dns-hosts.xml +++ b/tests/networkxml2argvdata/nat-network-dns-hosts.xml @@ -3,7 +3,7 @@ <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9c</uuid> <forward dev='eth0' mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> - <domain name="example.com"/> + <domain name='example.com'/> <dns> <host ip='192.168.122.1'> <hostname>host</hostname> diff --git a/tests/networkxml2xmlin/8021Qbh-net.xml b/tests/networkxml2xmlin/8021Qbh-net.xml index 2d779dc..33930d5 100644 --- a/tests/networkxml2xmlin/8021Qbh-net.xml +++ b/tests/networkxml2xmlin/8021Qbh-net.xml @@ -1,14 +1,14 @@ <network> <name>8021Qbh-net</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a8c</uuid> - <forward mode="private" dev="eth1"> - <interface dev="eth1"/> - <interface dev="eth2"/> - <interface dev="eth3"/> - <interface dev="eth4"/> - <interface dev="eth5"/> + <forward mode='private' dev='eth1'> + <interface dev='eth1'/> + <interface dev='eth2'/> + <interface dev='eth3'/> + <interface dev='eth4'/> + <interface dev='eth5'/> </forward> - <virtualport type="802.1Qbh"> - <parameters profileid="spongebob24"/> + <virtualport type='802.1Qbh'> + <parameters profileid='spongebob24'/> </virtualport> </network> diff --git a/tests/networkxml2xmlin/direct-net.xml b/tests/networkxml2xmlin/direct-net.xml index d73c454..86e1206 100644 --- a/tests/networkxml2xmlin/direct-net.xml +++ b/tests/networkxml2xmlin/direct-net.xml @@ -1,7 +1,7 @@ <network> <name>direct-net</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a8f</uuid> - <forward mode="bridge"> - <interface dev="eth10"/> + <forward mode='bridge'> + <interface dev='eth10'/> </forward> </network> diff --git a/tests/networkxml2xmlin/host-bridge-net.xml b/tests/networkxml2xmlin/host-bridge-net.xml index 960bc2d..c76d64a 100644 --- a/tests/networkxml2xmlin/host-bridge-net.xml +++ b/tests/networkxml2xmlin/host-bridge-net.xml @@ -1,6 +1,6 @@ <network> <name>host-bridge-net</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a8e</uuid> - <forward mode="bridge"/> - <bridge name="br0"/> + <forward mode='bridge'/> + <bridge name='br0'/> </network> diff --git a/tests/networkxml2xmlin/isolated-network.xml b/tests/networkxml2xmlin/isolated-network.xml index 0d562ea..ec9e4e2 100644 --- a/tests/networkxml2xmlin/isolated-network.xml +++ b/tests/networkxml2xmlin/isolated-network.xml @@ -1,11 +1,11 @@ <network> <name>private</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> - <bridge name="virbr2" /> + <bridge name='virbr2' /> <mac address='52:54:00:17:3F:37'/> - <ip address="192.168.152.1" netmask="255.255.255.0"> + <ip address='192.168.152.1' netmask='255.255.255.0'> <dhcp> - <range start="192.168.152.2" end="192.168.152.254" /> + <range start='192.168.152.2' end='192.168.152.254' /> </dhcp> </ip> </network> diff --git a/tests/networkxml2xmlin/nat-network.xml b/tests/networkxml2xmlin/nat-network.xml index 23f7fcb..1f1c605 100644 --- a/tests/networkxml2xmlin/nat-network.xml +++ b/tests/networkxml2xmlin/nat-network.xml @@ -1,21 +1,21 @@ <network> <name>default</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> - <bridge name="virbr0" /> - <forward mode="nat" dev="eth1"/> - <ip address="192.168.122.1" netmask="255.255.255.0"> + <bridge name='virbr0' /> + <forward mode='nat' dev='eth1'/> + <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> - <range start="192.168.122.2" end="192.168.122.254" /> - <host mac="00:16:3e:77:e2:ed" name="a.example.com" ip="192.168.122.10" /> - <host mac="00:16:3e:3e:a9:1a" name="b.example.com" ip="192.168.122.11" /> + <range start='192.168.122.2' end='192.168.122.254' /> + <host mac='00:16:3e:77:e2:ed' name='a.example.com' ip='192.168.122.10' /> + <host mac='00:16:3e:3e:a9:1a' name='b.example.com' ip='192.168.122.11' /> </dhcp> </ip> - <ip family="ipv4" address="192.168.123.1" netmask="255.255.255.0"> + <ip family='ipv4' address='192.168.123.1' netmask='255.255.255.0'> </ip> - <ip family="ipv6" address="2001:db8:ac10:fe01::1" prefix="64"> + <ip family='ipv6' address='2001:db8:ac10:fe01::1' prefix='64'> </ip> - <ip family="ipv6" address="2001:db8:ac10:fd01::1" prefix="64"> + <ip family='ipv6' address='2001:db8:ac10:fd01::1' prefix='64'> </ip> - <ip family="ipv4" address="10.24.10.1"> + <ip family='ipv4' address='10.24.10.1'> </ip> </network> diff --git a/tests/networkxml2xmlin/netboot-network.xml b/tests/networkxml2xmlin/netboot-network.xml index ed75663..d6b842c 100644 --- a/tests/networkxml2xmlin/netboot-network.xml +++ b/tests/networkxml2xmlin/netboot-network.xml @@ -1,14 +1,14 @@ <network> <name>netboot</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> - <bridge name="virbr1" stp='off' delay='1'/> - <domain name="example.com"/> + <bridge name='virbr1' stp='off' delay='1'/> + <domain name='example.com'/> <forward/> - <ip address="192.168.122.1" netmask="255.255.255.0"> - <tftp root="/var/lib/tftproot" /> + <ip address='192.168.122.1' netmask='255.255.255.0'> + <tftp root='/var/lib/tftproot' /> <dhcp> - <range start="192.168.122.2" end="192.168.122.254" /> - <bootp file="pxeboot.img" /> + <range start='192.168.122.2' end='192.168.122.254' /> + <bootp file='pxeboot.img' /> </dhcp> </ip> </network> diff --git a/tests/networkxml2xmlin/netboot-proxy-network.xml b/tests/networkxml2xmlin/netboot-proxy-network.xml index ecb6738..f07a4b2 100644 --- a/tests/networkxml2xmlin/netboot-proxy-network.xml +++ b/tests/networkxml2xmlin/netboot-proxy-network.xml @@ -1,13 +1,13 @@ <network> <name>netboot</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> - <bridge name="virbr1" stp='off' delay='1'/> - <domain name="example.com"/> + <bridge name='virbr1' stp='off' delay='1'/> + <domain name='example.com'/> <forward/> - <ip address="192.168.122.1" netmask="255.255.255.0"> + <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> - <range start="192.168.122.2" end="192.168.122.254" /> - <bootp file="pxeboot.img" server="10.20.30.40" /> + <range start='192.168.122.2' end='192.168.122.254' /> + <bootp file='pxeboot.img' server='10.20.30.40' /> </dhcp> </ip> </network> diff --git a/tests/networkxml2xmlin/routed-network.xml b/tests/networkxml2xmlin/routed-network.xml index 61d73c0..5e47038 100644 --- a/tests/networkxml2xmlin/routed-network.xml +++ b/tests/networkxml2xmlin/routed-network.xml @@ -1,9 +1,9 @@ <network> <name>local</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid> - <bridge name="virbr1" /> + <bridge name='virbr1' /> <mac address='12:34:56:78:9A:BC'/> - <forward mode="route" dev="eth1"/> - <ip address="192.168.122.1" netmask="255.255.255.0"> + <forward mode='route' dev='eth1'/> + <ip address='192.168.122.1' netmask='255.255.255.0'> </ip> </network> diff --git a/tests/networkxml2xmlin/vepa-net.xml b/tests/networkxml2xmlin/vepa-net.xml index b1a40c6..5672ed3 100644 --- a/tests/networkxml2xmlin/vepa-net.xml +++ b/tests/networkxml2xmlin/vepa-net.xml @@ -1,22 +1,22 @@ <network> <name>vepa-net</name> <uuid>81ff0d90-c91e-6742-64da-4a736edb9a8b</uuid> - <forward mode="vepa"> - <interface dev="eth1"/> - <interface dev="eth2"/> - <interface dev="eth3"/> + <forward mode='vepa'> + <interface dev='eth1'/> + <interface dev='eth2'/> + <interface dev='eth3'/> </forward> - <virtualport type="802.1Qbg"> - <parameters managerid="11" typeid="1193047" typeidversion="2" instanceid="b153fa89-1b87-9719-ec12-99e0054fb844"/> + <virtualport type='802.1Qbg'> + <parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='b153fa89-1b87-9719-ec12-99e0054fb844'/> </virtualport> - <portgroup name="bob" default="yes"> - <virtualport type="802.1Qbg"> - <parameters managerid="12" typeid="2193047" typeidversion="3" instanceid="5d00e0ba-e15c-959c-fbb6-b595b0655735"/> + <portgroup name='bob' default='yes'> + <virtualport type='802.1Qbg'> + <parameters managerid='12' typeid='2193047' typeidversion='3' instanceid='5d00e0ba-e15c-959c-fbb6-b595b0655735'/> </virtualport> </portgroup> - <portgroup name="alice"> - <virtualport type="802.1Qbg"> - <parameters managerid="13" typeid="3193047" typeidversion="4" instanceid="70bf45f9-01a8-f5ee-3c0f-e25a0a2e44a6"/> + <portgroup name='alice'> + <virtualport type='802.1Qbg'> + <parameters managerid='13' typeid='3193047' typeidversion='4' instanceid='70bf45f9-01a8-f5ee-3c0f-e25a0a2e44a6'/> </virtualport> </portgroup> </network> diff --git a/tests/nwfilterxml2xmlin/stp-test.xml b/tests/nwfilterxml2xmlin/stp-test.xml index de9d3e2..3056df8 100644 --- a/tests/nwfilterxml2xmlin/stp-test.xml +++ b/tests/nwfilterxml2xmlin/stp-test.xml @@ -8,14 +8,14 @@ <rule action='return' direction='out'> <stp srcmacaddr='1:2:3:4:5:6' srcmacmask='ff:ff:ff:ff:ff:ff' root-priority='0x1234' root-priority-hi='0x2345' - root-address="6:5:4:3:2:1" root-address-mask='ff:ff:ff:ff:ff:ff' + root-address='6:5:4:3:2:1' root-address-mask='ff:ff:ff:ff:ff:ff' root-cost='0x11223344' root-cost-hi='0x22334455' /> </rule> <rule action='reject' direction='in'> <stp srcmacaddr='1:2:3:4:5:6' srcmacmask='ff:ff:ff:ff:ff:ff' sender-priority='0x1234' - sender-address="6:5:4:3:2:1" + sender-address='6:5:4:3:2:1' port='123' port-hi='234' age='5544' age-hi='5555' max-age='7777' max-age-hi='8888' diff --git a/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa1.xml b/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa1.xml index 9fcdda8..de03711 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa1.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa1.xml @@ -9,10 +9,10 @@ <boot dev='network'/> </os> <cpu> - <topology sockets="2" cores="4" threads="2"/> + <topology sockets='2' cores='4' threads='2'/> <numa> - <cell cpus="0-7" memory="109550"/> - <cell cpus="8-15" memory="109550"/> + <cell cpus='0-7' memory='109550'/> + <cell cpus='8-15' memory='109550'/> </numa> </cpu> <clock offset='utc'/> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa2.xml b/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa2.xml index 9fcdda8..de03711 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa2.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-cpu-numa2.xml @@ -9,10 +9,10 @@ <boot dev='network'/> </os> <cpu> - <topology sockets="2" cores="4" threads="2"/> + <topology sockets='2' cores='4' threads='2'/> <numa> - <cell cpus="0-7" memory="109550"/> - <cell cpus="8-15" memory="109550"/> + <cell cpus='0-7' memory='109550'/> + <cell cpus='8-15' memory='109550'/> </numa> </cpu> <clock offset='utc'/> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology1.xml b/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology1.xml index 6b37207..7530950 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology1.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology1.xml @@ -9,7 +9,7 @@ <boot dev='network'/> </os> <cpu> - <topology sockets="3" cores="2" threads="1"/> + <topology sockets='3' cores='2' threads='1'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology2.xml b/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology2.xml index 9f09e81..904d4fe 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology2.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology2.xml @@ -10,7 +10,7 @@ </os> <cpu match='exact'> <model>core2duo</model> - <topology sockets="1" cores="2" threads="3"/> + <topology sockets='1' cores='2' threads='3'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology3.xml b/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology3.xml index 6b37207..7530950 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology3.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-cpu-topology3.xml @@ -9,7 +9,7 @@ <boot dev='network'/> </os> <cpu> - <topology sockets="3" cores="2" threads="1"/> + <topology sockets='3' cores='2' threads='1'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-numatune-memory.xml b/tests/qemuxml2argvdata/qemuxml2argv-numatune-memory.xml index 66ec6d0..dff63e4 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-numatune-memory.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-numatune-memory.xml @@ -5,7 +5,7 @@ <currentMemory>219136</currentMemory> <vcpu>2</vcpu> <numatune> - <memory mode="strict" nodeset="0-5,^4"/> + <memory mode='strict' nodeset='0-5,^4'/> </numatune> <os> <type arch='i686' machine='pc'>hvm</type> diff --git a/tests/storagepoolxml2xmlin/pool-iscsi-auth.xml b/tests/storagepoolxml2xmlin/pool-iscsi-auth.xml index f7d4d52..f0755bf 100644 --- a/tests/storagepoolxml2xmlin/pool-iscsi-auth.xml +++ b/tests/storagepoolxml2xmlin/pool-iscsi-auth.xml @@ -2,8 +2,8 @@ <name>virtimages</name> <uuid>e9392370-2917-565e-692b-d057f46512d6</uuid> <source> - <host name="iscsi.example.com"/> - <device path="demo-target"/> + <host name='iscsi.example.com'/> + <device path='demo-target'/> <auth type='chap' login='foobar' passwd='frobbar'/> </source> <target> diff --git a/tests/storagepoolxml2xmlin/pool-iscsi-vendor-product.xml b/tests/storagepoolxml2xmlin/pool-iscsi-vendor-product.xml index 01fbd9b..3889464 100644 --- a/tests/storagepoolxml2xmlin/pool-iscsi-vendor-product.xml +++ b/tests/storagepoolxml2xmlin/pool-iscsi-vendor-product.xml @@ -2,8 +2,8 @@ <name>virtimages</name> <uuid>e9392370-2917-565e-692b-d057f46512d6</uuid> <source> - <host name="iscsi.example.com"/> - <device path="demo-target"/> + <host name='iscsi.example.com'/> + <device path='demo-target'/> <auth type='chap' login='foobar' passwd='frobbar'/> <vendor name='test-vendor'/> <product name='test-product'/> diff --git a/tests/storagepoolxml2xmlin/pool-iscsi.xml b/tests/storagepoolxml2xmlin/pool-iscsi.xml index 37a16f7..c22b02e 100644 --- a/tests/storagepoolxml2xmlin/pool-iscsi.xml +++ b/tests/storagepoolxml2xmlin/pool-iscsi.xml @@ -2,8 +2,8 @@ <name>virtimages</name> <uuid>e9392370-2917-565e-692b-d057f46512d6</uuid> <source> - <host name="iscsi.example.com"/> - <device path="demo-target"/> + <host name='iscsi.example.com'/> + <device path='demo-target'/> </source> <target> <path>/dev/disk/by-path</path> diff --git a/tests/storagepoolxml2xmlin/pool-logical-create.xml b/tests/storagepoolxml2xmlin/pool-logical-create.xml index 4c67089..9b3a6f3 100644 --- a/tests/storagepoolxml2xmlin/pool-logical-create.xml +++ b/tests/storagepoolxml2xmlin/pool-logical-create.xml @@ -5,9 +5,9 @@ <allocation>99220455424</allocation> <available>671088640</available> <source> - <device path="/dev/sdb1"/> - <device path="/dev/sdb2"/> - <device path="/dev/sdb3"/> + <device path='/dev/sdb1'/> + <device path='/dev/sdb2'/> + <device path='/dev/sdb3'/> </source> <target> <path>/dev/HostVG</path> diff --git a/tests/storagepoolxml2xmlin/pool-mpath.xml b/tests/storagepoolxml2xmlin/pool-mpath.xml index a5fbbcb..7144cc3 100644 --- a/tests/storagepoolxml2xmlin/pool-mpath.xml +++ b/tests/storagepoolxml2xmlin/pool-mpath.xml @@ -1,4 +1,4 @@ -<pool type="mpath"> +<pool type='mpath'> <name>mpath</name> <uuid>e9392370-2917-565e-692b-d057f46512d6</uuid> <target> diff --git a/tests/storagepoolxml2xmlin/pool-scsi.xml b/tests/storagepoolxml2xmlin/pool-scsi.xml index 3650e43..85720d0 100644 --- a/tests/storagepoolxml2xmlin/pool-scsi.xml +++ b/tests/storagepoolxml2xmlin/pool-scsi.xml @@ -1,8 +1,8 @@ -<pool type="scsi"> +<pool type='scsi'> <name>hba0</name> <uuid>e9392370-2917-565e-692b-d057f46512d6</uuid> <source> - <adapter name="host0"/> + <adapter name='host0'/> </source> <target> <path>/dev/disk/by-path</path> diff --git a/tests/storagevolxml2xmlin/vol-file.xml b/tests/storagevolxml2xmlin/vol-file.xml index d7de0aa..f9a3635 100644 --- a/tests/storagevolxml2xmlin/vol-file.xml +++ b/tests/storagevolxml2xmlin/vol-file.xml @@ -1,7 +1,7 @@ <volume> <name>sparse.img</name> <source/> - <capacity unit="T">1</capacity> + <capacity unit='T'>1</capacity> <allocation>0</allocation> <target> <path>/var/lib/libvirt/images/sparse.img</path> diff --git a/tests/storagevolxml2xmlin/vol-qcow2.xml b/tests/storagevolxml2xmlin/vol-qcow2.xml index b4924de..22ce6a0 100644 --- a/tests/storagevolxml2xmlin/vol-qcow2.xml +++ b/tests/storagevolxml2xmlin/vol-qcow2.xml @@ -3,7 +3,7 @@ <key>/var/lib/libvirt/images/OtherDemo.img</key> <source> </source> - <capacity unit="G">5</capacity> + <capacity unit='G'>5</capacity> <allocation>294912</allocation> <target> <path>/var/lib/libvirt/images/OtherDemo.img</path> diff --git a/tests/xml2sexprdata/xml2sexpr-bridge-ipaddr.xml b/tests/xml2sexprdata/xml2sexpr-bridge-ipaddr.xml index 83daf82..73cfda7 100644 --- a/tests/xml2sexprdata/xml2sexpr-bridge-ipaddr.xml +++ b/tests/xml2sexprdata/xml2sexpr-bridge-ipaddr.xml @@ -17,12 +17,12 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <interface type="bridge"> - <mac address="00:11:22:33:44:55"/> - <source bridge="xenbr2"/> - <ip address="192.0.2.1"/> - <script path="vif-bridge"/> - <target dev="vif4.0"/> + <interface type='bridge'> + <mac address='00:11:22:33:44:55'/> + <source bridge='xenbr2'/> + <ip address='192.0.2.1'/> + <script path='vif-bridge'/> + <target dev='vif4.0'/> </interface> <console tty='/dev/pts/4'/> </devices> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-blkback.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-blkback.xml index 97d88e0..1cdc850 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-blkback.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-blkback.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='block' device='disk'> - <driver name="phy"/> + <driver name='phy'/> <source dev='/dev/MainVG/GuestLV'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-qcow.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-qcow.xml index 008658c..91e22c7 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-qcow.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-qcow.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> - <driver name="tap" type="qcow"/> + <driver name='tap' type='qcow'/> <source file='/root/some.img'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-raw.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-raw.xml index 630b3f9..218a8e4 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-raw.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap-raw.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> - <driver name="tap" type="aio"/> + <driver name='tap' type='aio'/> <source file='/root/some.img'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap.xml index 324b6d0..4b9a88b 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> - <driver name="tap"/> + <driver name='tap'/> <source file='/root/some.img'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2-raw.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2-raw.xml index 0cc37cc..6a18368 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2-raw.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2-raw.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> - <driver name="tap2" type="aio"/> + <driver name='tap2' type='aio'/> <source file='/root/some.img'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2.xml index 67cce17..44d0ee7 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-blktap2.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> - <driver name="tap2"/> + <driver name='tap2'/> <source file='/root/some.img'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-disk-drv-loop.xml b/tests/xml2sexprdata/xml2sexpr-disk-drv-loop.xml index 978ca7c..cd5d7cc 100644 --- a/tests/xml2sexprdata/xml2sexpr-disk-drv-loop.xml +++ b/tests/xml2sexprdata/xml2sexpr-disk-drv-loop.xml @@ -14,7 +14,7 @@ <on_crash>destroy</on_crash> <devices> <disk type='file' device='disk'> - <driver name="file"/> + <driver name='file'/> <source file='/root/some.img'/> <target dev='xvda'/> </disk> diff --git a/tests/xml2sexprdata/xml2sexpr-escape.xml b/tests/xml2sexprdata/xml2sexpr-escape.xml index 6eed578..bca2c81 100644 --- a/tests/xml2sexprdata/xml2sexpr-escape.xml +++ b/tests/xml2sexprdata/xml2sexpr-escape.xml @@ -5,7 +5,7 @@ <type>hvm</type> <kernel>/var/lib/xen/vmlinuz.2Dn2YT</kernel> <initrd>/var/lib/xen/initrd.img.0u-Vhq</initrd> - <cmdline> method=http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5…"devel" </cmdline> + <cmdline> method=http://download.fedora.devel.redhat.com/pub/fedora/linux/core/test/5…" </cmdline> <loader>/usr/lib/xen/boot/hvmloader</loader> </os> <memory>430080</memory> diff --git a/tests/xml2sexprdata/xml2sexpr-net-bridged.xml b/tests/xml2sexprdata/xml2sexpr-net-bridged.xml index 5f68a6d..80a91ac 100644 --- a/tests/xml2sexprdata/xml2sexpr-net-bridged.xml +++ b/tests/xml2sexprdata/xml2sexpr-net-bridged.xml @@ -17,11 +17,11 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <interface type="bridge"> - <mac address="00:11:22:33:44:55"/> - <source bridge="xenbr2"/> - <script path="vif-bridge"/> - <target dev="vif4.0"/> + <interface type='bridge'> + <mac address='00:11:22:33:44:55'/> + <source bridge='xenbr2'/> + <script path='vif-bridge'/> + <target dev='vif4.0'/> </interface> <console tty='/dev/pts/4'/> </devices> diff --git a/tests/xml2sexprdata/xml2sexpr-net-e1000.xml b/tests/xml2sexprdata/xml2sexpr-net-e1000.xml index 6e9ce94..3916d54 100644 --- a/tests/xml2sexprdata/xml2sexpr-net-e1000.xml +++ b/tests/xml2sexprdata/xml2sexpr-net-e1000.xml @@ -17,12 +17,12 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <interface type="bridge"> - <mac address="00:11:22:33:44:55"/> - <source bridge="xenbr2"/> - <script path="vif-bridge"/> + <interface type='bridge'> + <mac address='00:11:22:33:44:55'/> + <source bridge='xenbr2'/> + <script path='vif-bridge'/> <model type='e1000'/> - <target dev="vif4.0"/> + <target dev='vif4.0'/> </interface> <console tty='/dev/pts/4'/> </devices> diff --git a/tests/xml2sexprdata/xml2sexpr-net-routed.xml b/tests/xml2sexprdata/xml2sexpr-net-routed.xml index 778c911..1fa24e6 100644 --- a/tests/xml2sexprdata/xml2sexpr-net-routed.xml +++ b/tests/xml2sexprdata/xml2sexpr-net-routed.xml @@ -17,12 +17,12 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <interface type="ethernet"> - <mac address="00:11:22:33:44:55"/> - <ip address="172.14.5.6"/> - <source dev="eth3"/> - <script path="vif-routed"/> - <target dev="vif4.0"/> + <interface type='ethernet'> + <mac address='00:11:22:33:44:55'/> + <ip address='172.14.5.6'/> + <source dev='eth3'/> + <script path='vif-routed'/> + <target dev='vif4.0'/> </interface> <console tty='/dev/pts/4'/> </devices> diff --git a/tests/xml2sexprdata/xml2sexpr-pv-vfb-new-auto.xml b/tests/xml2sexprdata/xml2sexpr-pv-vfb-new-auto.xml index c17d9d5..ec12fb3 100644 --- a/tests/xml2sexprdata/xml2sexpr-pv-vfb-new-auto.xml +++ b/tests/xml2sexprdata/xml2sexpr-pv-vfb-new-auto.xml @@ -18,6 +18,6 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <graphics type='vnc' port='-1' autoport='yes' listen="127.0.0.1" passwd="123456" keymap="ja"/> + <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' passwd='123456' keymap='ja'/> </devices> </domain> diff --git a/tests/xml2sexprdata/xml2sexpr-pv-vfb-new.xml b/tests/xml2sexprdata/xml2sexpr-pv-vfb-new.xml index a8430eb..5b0d19a 100644 --- a/tests/xml2sexprdata/xml2sexpr-pv-vfb-new.xml +++ b/tests/xml2sexprdata/xml2sexpr-pv-vfb-new.xml @@ -18,6 +18,6 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <graphics type='vnc' port='5906' listen="127.0.0.1" passwd="123456" keymap="ja"/> + <graphics type='vnc' port='5906' listen='127.0.0.1' passwd='123456' keymap='ja'/> </devices> </domain> diff --git a/tests/xml2sexprdata/xml2sexpr-pv-vfb-orig.xml b/tests/xml2sexprdata/xml2sexpr-pv-vfb-orig.xml index a8430eb..5b0d19a 100644 --- a/tests/xml2sexprdata/xml2sexpr-pv-vfb-orig.xml +++ b/tests/xml2sexprdata/xml2sexpr-pv-vfb-orig.xml @@ -18,6 +18,6 @@ <source file='/root/some.img'/> <target dev='xvda'/> </disk> - <graphics type='vnc' port='5906' listen="127.0.0.1" passwd="123456" keymap="ja"/> + <graphics type='vnc' port='5906' listen='127.0.0.1' passwd='123456' keymap='ja'/> </devices> </domain> diff --git a/tests/xml2vmxdata/xml2vmx-serial-network-client.xml b/tests/xml2vmxdata/xml2vmx-serial-network-client.xml index e2a5afe..a40b135 100644 --- a/tests/xml2vmxdata/xml2vmx-serial-network-client.xml +++ b/tests/xml2vmxdata/xml2vmx-serial-network-client.xml @@ -7,8 +7,8 @@ </os> <devices> <serial type='tcp'> - <source mode="connect" host="192.168.0.17" service="42001"/> - <protocol type="raw"/> + <source mode='connect' host='192.168.0.17' service='42001'/> + <protocol type='raw'/> <target port='0'/> </serial> </devices> diff --git a/tests/xml2vmxdata/xml2vmx-serial-network-server.xml b/tests/xml2vmxdata/xml2vmx-serial-network-server.xml index a17e2fe..2d33073 100644 --- a/tests/xml2vmxdata/xml2vmx-serial-network-server.xml +++ b/tests/xml2vmxdata/xml2vmx-serial-network-server.xml @@ -7,8 +7,8 @@ </os> <devices> <serial type='tcp'> - <source mode="bind" host="0.0.0.0" service="42001"/> - <protocol type="tls"/> + <source mode='bind' host='0.0.0.0' service='42001'/> + <protocol type='tls'/> <target port='0'/> </serial> </devices> -- 1.7.7.3

3 8

[libvirt] [PATCH 0/6] Add new command domiftune
by Hu Tao 08 Dec '11

08 Dec '11

This series adds a new command domiftune to get/set parameters of domain's network interfaces. Supported parameters are bandwidth settings. Currently the network interface bandwidth can only be set: - in domain's xml before the domain is up - when attaching an interface by attach-interface With this series, users can change network interface bandwidth settings using virsh, whether the domain is running or not. Hu Tao (6): Add API virDomain{S,G}etInterfaceParameters virDomain{S,G}etInterfaceParameters: the main entry points Add virDomain{S,G}etInterfaceparameters support to the remote driver Add virDomain{S,G}etInterfaceParameters support to qemu driver Enable the virDomain{S,G}etInterfaceParameters in virsh Add document for the new command domiftune daemon/remote.c | 64 ++++++ include/libvirt/libvirt.h.in | 50 +++++ python/generator.py | 2 + src/driver.h | 12 ++ src/libvirt.c | 118 ++++++++++++ src/libvirt_public.syms | 6 + src/qemu/qemu_driver.c | 434 ++++++++++++++++++++++++++++++++++++++++++ src/remote/remote_driver.c | 52 +++++ src/remote/remote_protocol.x | 28 +++- src/remote_protocol-structs | 24 +++ tools/virsh.c | 227 ++++++++++++++++++++++ tools/virsh.pod | 21 ++ 12 files changed, 1037 insertions(+), 1 deletions(-) -- 1.7.3.1

1 6

[libvirt] a compilation issue
by Alex Jia 08 Dec '11

08 Dec '11

Hi developers, I met the following compilation issue when I 'git checkout v0.9.8-rc1' tag then run './configure && make': <snip> Copying file ._bootmp/gnulib/lib/netinet_in.in.h Copying file ._bootmp/gnulib/lib/nonblocking.c Copying file ._bootmp/gnulib/lib/nonblocking.h Copying file ._bootmp/gnulib/lib/open.c .gnulib/gnulib-tool: line 1475: patch: command not found .gnulib/gnulib-tool: *** patch file gnulib/local/lib/openpty.c.diff didn't apply cleanly .gnulib/gnulib-tool: *** Stop. Failed to bootstrap, please investigate. make: *** [_autogen] Error 1 </snip> Has any advice about this? BTW, it's fine when I compiled latest GIT head. Thanks, Alex -------------------------------------------- IRC: #virt, #libvirt-qe, #apac-qa Phone: +86-10-6260-8185 --------------------------------------------

2 2

[libvirt] [PATCH] Prevent crash of libvirtd when attaching to existing qemu process
by Jim Fehlig 07 Dec '11

07 Dec '11

With security_driver set to "none" in /etc/libvirt/qemu.conf, libvirtd would crash when attempted to attach to an existing qemu process. Only copy the security model if it actually exists. --- src/qemu/qemu_process.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 9309761..45ed011 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3609,7 +3609,8 @@ int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED, if (virSecurityManagerGetProcessLabel(driver->securityManager, vm, seclabel) < 0) goto cleanup; - if (!(vm->def->seclabel.model = strdup(driver->caps->host.secModel.model))) + if (driver->caps->host.secModel.model && + !(vm->def->seclabel.model = strdup(driver->caps->host.secModel.model))) goto no_memory; if (!(vm->def->seclabel.label = strdup(seclabel->label))) goto no_memory; -- 1.7.7

2 1

[libvirt] Start of freeze for libvirt-0.9.8 and availability of rc1
by Daniel Veillard 07 Dec '11

07 Dec '11

We are now entering the freeze for libvirt-0.9.8 . For portability sake I think adding more support for PPC machines should still be allowed for a few days, as long as it's not impacting too much of the common code. I have made a release candidate 1 tarball (and associated rpms) at ftp://libvirt.org/libvirt/libvirt-0.9.8-rc1.tar.gz and the git tree is tagged. I think I will make an rc2 on Mon or Thu and then try to make the release around Thursday next week if things looks good. Please give it a try ! thanks in advance, Daniel -- Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/ http://veillard.com/ | virtualization library http://libvirt.org/

7 20

[libvirt] [PATCH 1/2] Fix typo in virDomainResume API doc
by Christophe Fergeau 07 Dec '11

07 Dec '11

It's referring to virSuspendDomain instead of virDomainSuspend. --- src/libvirt.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/libvirt.c b/src/libvirt.c index 68074e7..9977915 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -2391,7 +2391,7 @@ error: * @domain: a domain object * * Resume a suspended domain, the process is restarted from the state where - * it was frozen by calling virSuspendDomain(). + * it was frozen by calling virDomainSuspend(). * This function may require privileged access * * Returns 0 in case of success and -1 in case of failure. -- 1.7.7.3

2 3

[libvirt] [PATCH] API: Share code between virConnectOpen functions
by Eduardo Lima (Etrunko) 07 Dec '11

07 Dec '11

From: Eduardo Lima (Etrunko) <eblima(a)br.ibm.com> Signed-off-by: Eduardo Lima (Etrunko) <eblima(a)br.ibm.com> --- src/libvirt.c | 30 ++---------------------------- 1 files changed, 2 insertions(+), 28 deletions(-) diff --git a/src/libvirt.c b/src/libvirt.c index 68074e7..ca7a9a2 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -1341,20 +1341,7 @@ failed: virConnectPtr virConnectOpen (const char *name) { - virConnectPtr ret = NULL; - if (!initialized) - if (virInitialize() < 0) - goto error; - - VIR_DEBUG("name=%s", name); - ret = do_open (name, NULL, 0); - if (!ret) - goto error; - return ret; - -error: - virDispatchError(NULL); - return NULL; + return virConnectOpenAuth(name, NULL, 0); } /** @@ -1375,20 +1362,7 @@ error: virConnectPtr virConnectOpenReadOnly(const char *name) { - virConnectPtr ret = NULL; - if (!initialized) - if (virInitialize() < 0) - goto error; - - VIR_DEBUG("name=%s", name); - ret = do_open (name, NULL, VIR_CONNECT_RO); - if (!ret) - goto error; - return ret; - -error: - virDispatchError(NULL); - return NULL; + return virConnectOpenAuth(name, NULL, VIR_CONNECT_RO); } /** -- 1.7.4.4

2 1