- Devel - libvirt List Archives

Re: [libvirt] macvtap support in libvirt 0.9.8
by Amit Tewari 12 Dec '11

12 Dec '11

Hi all, When I see dmesg on host machine it gives error- "macvtap0: no IPv6 routers present" Is this error causing saome problem.. Even if guest starts it gives error "Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. [FAILED]" Is this dmesg = - "macvtap0: no IPv6 routers present" the cause??? ________________________________ From: libvir-list-bounces(a)redhat.com [mailto:libvir-list-bounces@redhat.com] On Behalf Of Amit Tewari Sent: Monday, December 12, 2011 3:50 PM To: libvir-list(a)redhat.com Subject: Re: [libvirt] macvtap support in libvirt 0.9.8 Hi all, Please ignore my previous mail.. This is my test scenario My test environment Host os=rhel6.1 Guest os = rhel6.1 Libvirt=0.9.8 Kvm hypervisor I am creating a macvtap interface on host machine at eth0 interface #ip link show macvtap0 51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500 link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff I have made this entry in guest xml file <interface type='direct'> <mac address=1e:aa:f7:43:7e:3d'/> <source dev='eth0' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Now when I start the guest #virsh start guest It gives following message error: Failed to start domain guest error: Cannot set interface flags on 'macvtap1': Device or resource busy Please let me know what else we need to do to make macvtap work on kvm. ________________________________ From: libvir-list-bounces(a)redhat.com [mailto:libvir-list-bounces@redhat.com] On Behalf Of Amit Tewari Sent: Monday, December 12, 2011 3:22 PM To: libvir-list(a)redhat.com Subject: [libvirt] macvtap support in libvirt 0.9.8 Hi all, My test environment Host os=rhel6.1 Guest os = rhel6.1 Libvirt=0.9.8 Kvm hypervisor I am creating a macvtap interface on host machine at eth0 interface #ip link show macvtap0 51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500 link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff I have made this entry in guest xml file <interface type='direct'> <mac address=1e:aa:f7:43:7e:3d'/> <source dev='eth0' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Now when I start the guest #virsh start guest It gives following message "Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. [FAILED]" Guest eth interface does not create. what is the problem. Please let me know what else we need to do to make macvtap work on kvm. DISCLAIMER: ------------------------------------------------------------------------ ----------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . ------------------------------------------------------------------------ ----------------------------------------------- DISCLAIMER: ------------------------------------------------------------------------ ----------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . ------------------------------------------------------------------------ ----------------------------------------------- DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

1 0

[libvirt] [PATCH 1/1] Fix make uninstall
by Dave Allan 12 Dec '11

12 Dec '11

Make uninstall currently fails with the following message: rmdir /etc/sasl2/ rmdir: failed to remove `/etc/sasl2/': Directory not empty That's fine (correct in fact) so force the command to return success with || : --- daemon/Makefile.am | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/daemon/Makefile.am b/daemon/Makefile.am index 22a9d38..023410e 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -351,7 +351,7 @@ install-data-sasl: uninstall-data-sasl: rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf - rmdir $(DESTDIR)$(sysconfdir)/sasl2/ + rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || : else install-data-sasl: uninstall-data-sasl: -- 1.7.4.4

2 1

[libvirt] macvtap support in libvirt 0.9.8
by Amit Tewari 12 Dec '11

12 Dec '11

Hi all, My test environment Host os=rhel6.1 Guest os = rhel6.1 Libvirt=0.9.8 Kvm hypervisor I am creating a macvtap interface on host machine at eth0 interface #ip link show macvtap0 51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500 link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff I have made this entry in guest xml file <interface type='direct'> <mac address=1e:aa:f7:43:7e:3d'/> <source dev='eth0' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Now when I start the guest #virsh start guest It gives following message "Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. [FAILED]" Guest eth interface does not create. what is the problem. Please let me know what else we need to do to make macvtap work on kvm. DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

1 0

Re: [libvirt] virsh console giving Error
by Amit Tewari 12 Dec '11

12 Dec '11

Hi, I added this (in /etc/grub.conf) ---- console=tty0 console=ttyS0,115200 ----- But still same error is coming. -----Original Message----- From: libvir-list-bounces(a)redhat.com [mailto:libvir-list-bounces@redhat.com] On Behalf Of Amit Tewari Sent: Monday, December 12, 2011 12:36 PM To: Kashyap Chamarthy Cc: libvir-list(a)redhat.com Subject: Re: [libvirt] virsh console giving Error Hi, I am using libvirt 0.9.7 -----Original Message----- From: Kashyap Chamarthy [mailto:kchamart@redhat.com] Sent: Monday, December 12, 2011 12:32 PM To: Amit Tewari Cc: libvir-list(a)redhat.com Subject: Re: [libvirt] virsh console giving Error On 12/12/2011 12:16 PM, Amit Tewari wrote: > Hi all, > > Following is my test environment > > Host os= rhel6.1 > > Guest os=rhel6.1 > > Hypervisor - kvm > > > > I have a created a guest machine using virt-install command. And it has created guest > successfully. > > But now when I issue following command > > #virsh console guest > > > > Following error is displayed - > > > > "Error: internal error character device (null) is not using a PTY" > > > > Please let me no how can I avoid this error. You have not specified what distribution, version of libvirt are you using. First, can you ensure if you have serial console set up in your guest by checking if you have the below directives in your guest kernel's command line options (in /etc/grub.conf) ---- console=tty0 console=ttyS0,115200 ---- If not, you can add it by running the below (ensure the guest is shut-off): # virt-edit guest /etc/grub.conf 'virt-edit' tool comes with libguestfs-tools-c package. -- /kashyap > > > > Regards > > Amit Tewari > > > > -- > libvir-list mailing list > libvir-list(a)redhat.com > https://www.redhat.com/mailman/listinfo/libvir-list DISCLAIMER: ------------------------------------------------------------------------ ----------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . ------------------------------------------------------------------------ ----------------------------------------------- -- libvir-list mailing list libvir-list(a)redhat.com https://www.redhat.com/mailman/listinfo/libvir-list DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

1 0

[libvirt] virsh console giving Error
by Amit Tewari 12 Dec '11

12 Dec '11

Hi all, Following is my test environment Host os= rhel6.1 Guest os=rhel6.1 Hypervisor - kvm I have a created a guest machine using virt-install command. And it has created guest successfully. But now when I issue following command #virsh console guest Following error is displayed - "Error: internal error character device (null) is not using a PTY" Please let me no how can I avoid this error. Regards Amit Tewari DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

2 1

[libvirt] Virtio Balloon Dynamic behaviour ??
by Pankaj Rawat 12 Dec '11

12 Dec '11

Hi all, I want to be clear in details regarding Virtio balloon Driver in RHEL 6.1 KVM hypervisor In documentations it is written that Virtio balloon driver allow the guest to expand its memory dynamically . Now I want to know the meaning of dynamically ... Whether it means 1) We can change the memory of guest using libvirt API only i.e by using virsh setmem command at runtime (VERIFIED) 2) Or the guest itself can check that it is running out of memory so it request host for some memory and when the host respond by giving back memory it expands its memory size. Which is automation The 1st option is working fine Now can anyone tell me that memory expantion can be done dynamically(point 2) also DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------

1 0

[libvirt] [test-API][PATCH] Add test case get_cpu_shares.py for cpu scheduler info testing
by Nan Zhang 12 Dec '11

12 Dec '11

* repos/domain/get_cpu_shares.py: get the value of cpu_shares property of the guest. --- lib/domainAPI.py | 2 +- repos/domain/get_cpu_shares.py | 109 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 110 insertions(+), 1 deletions(-) create mode 100644 repos/domain/get_cpu_shares.py diff --git a/lib/domainAPI.py b/lib/domainAPI.py index a6efab7..0058254 100644 --- a/lib/domainAPI.py +++ b/lib/domainAPI.py @@ -546,7 +546,7 @@ class DomainAPI(object): def set_sched_params_flags(self, domname, params, flags): try: dom_obj = self.get_domain_by_name(domname) - retval = dom_obj.setSchedulerParameters(params, flags) + retval = dom_obj.setSchedulerParametersFlags(params, flags) return retval except libvirt.libvirtError, e: message = e.get_error_message() diff --git a/repos/domain/get_cpu_shares.py b/repos/domain/get_cpu_shares.py new file mode 100644 index 0000000..be7e649 --- /dev/null +++ b/repos/domain/get_cpu_shares.py @@ -0,0 +1,109 @@ +#!/usr/bin/env python +"""Get the value of cpu_shares property of the guest + domain:get_cpu_shares + guestname + xxx + flags + 0|1|2 +""" + +__author__ = 'Nan Zhang: nzhang(a)redhat.com' +__date__ = 'Tue Sep 27, 2011' +__version__ = '0.1.0' +__credits__ = 'Copyright (C) 2011 Red Hat, Inc.' +__all__ = ['check_params', 'check_cpu_shares', 'get_cpu_shares'] + +import os +import re +import sys +import time +from xml.dom import minidom + + +def append_path(path): + """Append root path of package""" + if path in sys.path: + pass + else: + sys.path.append(path) + +pwd = os.getcwd() +result = re.search('(.*)libvirt-test-API', pwd) +append_path(result.group(0)) + +from lib import connectAPI +from lib import domainAPI +from utils.Python import utils +from utils.Python import xmlbuilder +from exception import LibvirtAPI + +def check_params(params): + """Verify inputing parameter dictionary""" + logger = params['logger'] + keys = ['guestname', 'flags'] + for key in keys: + if key not in params: + logger.error("%s is required" %key) + return 1 + return 0 + +def check_cpu_shares(params, util, guestname, cpu_shares): + """Check the value of cpu_shares""" + logger = params['logger'] + cmd = "cat /cgroup/cpu/libvirt/qemu/%s/cpu.shares" % guestname + ret, out = util.exec_cmd(cmd, shell=True) + if ret: + logger.error("fail to get the value of cpu_shares: %s" % out[0]) + return 0 + else: + logger.info("the value of cpu_shares: %s (getting from cgroup)" % out[0]) + + if cmp(int(out[0]), cpu_shares): + return 1 + else: + logger.info("the value of cpu_shares does match the original \ +cpu scheduler information.") + return 0 + +def get_cpu_shares(params): + """Get the cpu scheduler information""" + # Initiate and check parameters + params_check_result = check_params(params) + if params_check_result: + return 1 + logger = params['logger'] + guestname = params['guestname'] + flags = params['flags'] + + # Connect to local hypervisor connection URI + util = utils.Utils() + uri = util.get_uri('127.0.0.1') + conn = connectAPI.ConnectAPI() + virconn = conn.open(uri) + + caps = conn.get_caps() + logger.debug(caps) + + domobj = domainAPI.DomainAPI(virconn) + try: + sched_info = domobj.get_sched_params_flags(guestname, int(flags)) + cpu_shares = sched_info['cpu_shares'] + logger.debug("the value of cpu_shares is %s" % cpu_shares) + except LibvirtAPI, e: + logger.error("API error message: %s, error code is %s" % + (e.response()['message'], e.response()['code'])) + return 1 + + check_result = check_cpu_shares(params, util, guestname, cpu_shares) + if check_result: + logger.error("cpu_shares does not match.") + conn.close() + return 1 + + logger.info("success to get scheduler parameters.") + conn.close() + return 0 + +def get_cpu_shares_clean(): + """Clean testing environment""" + pass -- 1.7.4.4

1 0

[libvirt] [PATCH 1/6] Allow network model to contain "-"
by Michael Ellerman 12 Dec '11

12 Dec '11

From: Michael Ellerman <michael(a)ellerman.id.au> In QEMU PPC64 we have a network device called "spapr-vlan". We can specify this using the existing syntax for network devices, however libvirt currently rejects "spapr-vlan" in virDomainNetDefParseXML() because of the "-". Fix the code to accept "-". Signed-off-by: Michael Ellerman <michael(a)ellerman.id.au> --- src/conf/domain_conf.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 75e51a0..5de33b9 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -3703,8 +3703,7 @@ virDomainNetDefParseXML(virCapsPtr caps, if (model != NULL) { int i; for (i = 0 ; i < strlen(model) ; i++) { - int char_ok = c_isalnum(model[i]) || model[i] == '_'; - if (!char_ok) { + if (!c_isalnum(model[i]) && model[i] != '_' && model[i] != '-') { virDomainReportError(VIR_ERR_INVALID_ARG, "%s", _("Model name contains invalid characters")); goto error; -- 1.7.7.3

3 16

[libvirt] (no subject)
by Osier Yang 10 Dec '11

10 Dec '11

Hi, all This is a basic implementation of libvirt Native Linux KVM Tool driver. Note that this is just made with my own interest and spare time, it's not an endorsement/effort by Red Hat, and it isn't supported by Red Hat officially. Basically, the driver is designed as *stateful*, as KVM tool doesn't maintain any info about the guest except a socket which for its own IPC. And it's implemented by using KVM tool binary, which is name "kvm" currently, along with cgroup controllers "cpuacct", and "memory" support. And as one of KVM tool's pricinple is to allow both the non-root and root user to play with. The driver is designed to support root and non-root too, just like QEMU does. Example of the connection URI: virsh -c kvmtool:///system virsh -c kvmtool:///session virsh -c kvmtool+unix:///system virsh -c kvmtool+unix:///session The implementation can support more or less than 15 virsh commands currently, including basic domain cycle operations (define/undefine, start/destroy, suspend/resume, console, setmem, schedinfo, dumpxml, ,autostart, dominfo, etc.) About the domain configuration: * "kernel": must be specified as KVM tool only support boots from the kernel currently (no integration with BIOS app yet). * "disk": only virtio bus is supported, and device type must be 'disk'. * "serial/console": only one console is supported, of type serial or virtio (can extend to support multiple console as long as kvm tool supports, libvirt already supported mutiple console, see upstream commit 0873b688c). * "p9fs": only support specifying the source dir, and mount tag, only type of 'mount' is supported. * "memballoon": only virtio is supported, and there is no way to config the addr. * Multiple "disk" and "p9fs" is supported. * Graphics and network are not supported, will explain below. Please see "[PATCH 7/8]" for an example of the domain config. (which contains all the XMLs supported by current implementation). The problems of Native Linux KVM Tool from libvirt p.o.v: * Some destros package "qemu-kvm" as "kvm", also "kvm" is a long established name for "KVM" itself, so naming the project as "kvm" might be not a good idea. I assume it will be named as "kvmtool" in this implementation, never mind this if you don't like that, it can be updated easily. :-) * It still doesn't have an official package yet, even no "make install". means we have no way to check the dependancy and do the checking when 'configure'. I assume it will be installed as "/usr/bin/kvmtool" in this implementation. This is the main reason which can prevents upstream libvirt accepting the patches I guess. * Lacks of options for user's configuration, such as "-vnc", there is no option for user to configure the properties for the "vnc", such as the port. It hides things, doesn't provide ways to query the properties too, this causes problems for libvirt to add the vnc support, as vnc clients such as virt-manager, virt-viewer, have no way to connect the guest. Even vncviewer can't. * KVM tool manages the network completely itself (with DHCP support?), no way to configure, except specify the modes (user|tap|none). I have not test it yet, but it should need explicit script to setup the network rules(e.g. NAT) for the guest access outside world. Anyway, there is no way for libvirt to control the guest network. * There is a gap about the domain status between KVM tool and libvirt, it's caused by KVM tool unlink()s the guest socket when user exits from console (both text and graphic), but libvirt still think the guest is running. * KVM tool uses $HOME/.kvm_tool as the state dir, and no way to configure, I made a small patch to allow KVM tool accept a ENV variable, which is "KVM_STATE_DIR", it's used across the driver. I made a simple patch against kvm tool to let the whole patches work. See "[PATCH] kvm tools.....". As generally we want the state dir of a driver can be "/var/run/libvirt/kvmtool/..." for root user or "$HOME/.libvirt/kvmtool/run" for non-root user. * kvmtoolGetVersion is just broken now, as what "./kvm version" returns is something like "3.0.rc5.873.gb73216", however, libvirt wants things like "2.6.40.6-0". This might be not a problem as long as KVM tool has a official package. * console connection is implemented by setup ptys in libvirt, stdout/stderr of kvm tool process is redirected to the master pty, and libvirt connects to the slave pty. This works fine now, but it might be better if kvm tool could provide more advanced console mechanisms. Just like QEMU does? * Not much ways existed yet for external apps or user to query the guest informations. But this might be changed soon per KVM tool grows up quickly. * It will be quite desireable if kvm tool could report the capabilities, of which is lacked by QEMU forever (seems so), it causes much pain for upper layer mgmt apps. See the RFC by Daniel Berrange in QEMU list for more details: http://lists.nongnu.org/archive/html/qemu-devel/2010-06/msg00921.html As a conclusion, it seems to me that KVM tool dosesn't consider too much about the interface for upper layer management tools, (generally, upper layer apps will want good interface to set/get), which might be no good for KVM tool future development. Thoughts, and opinions? Thanks. [PATCH 1/7] kvmtool: Add configure support [PATCH] kvm tools: Introduce an ENV variable for the state dir [PATCH 2/7] kvmtool: Add documents [PATCH 3/7] kvmtool: Add new enums and error codes for the driver [PATCH 4/7] kvmtool: Add hook support for kvmtool domain [PATCH 5/7] kvmtool: Add new domain type [PATCH 6/7] conf: Set source type of the stub console [PATCH 7/7] kvmtool: Implementation for kvm tool driver Regards, Osier

4 25

[libvirt] libvirt hyper-v
by Andy Li 10 Dec '11

10 Dec '11

Dear Sir or Madam: I am engineer who want to connect hyper-v R2 via libvirt 0.9.3, but after create ceritificate file, and set the hyper-v winRM status to AllowUnencrypted="true" Then I connect the hyper-v by the command: virsh -c hyperv://192.168.58.26:5985 it always reply: Error: unable to complete TLS handshake: A TLS packet with unexpected length was received Error: failed to connect to the hypervisor Hope you can help me, thank you very much in advance. Thanks, Andy Li MFG Software Developer Department of Storage Products R&D, SCS Universal Scientific Industrial (Shanghai) Co., Ltd 421 Lishizhen Rd, Pudong New Area, Shanghai,P.R. China, 201203 Tel : +86 -21-5896 6996 ext. 81453 Fax : +86 -21-5080 4268

2 1