- Devel - libvirt List Archives

[libvirt] [PATCH] virsh: Clean up usage of boolean flag variables
by Peter Krempa 10 Apr '12

10 Apr '12

This patch cleans up variables used to store boolean command flags that are inquired by vshCommandOptBool to use the bool data type instead of an integer. Additionaly this patch cleans up flag variables that are inferred from existing flags. --- tools/virsh.c | 120 ++++++++++++++++++++++++++++---------------------------- 1 files changed, 60 insertions(+), 60 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index cfdd040..1a2e191 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -933,9 +933,9 @@ static const vshCmdOptDef opts_list[] = { static bool cmdList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED) { - int inactive = vshCommandOptBool(cmd, "inactive"); - int all = vshCommandOptBool(cmd, "all"); - int active = !inactive || all ? 1 : 0; + bool inactive = vshCommandOptBool(cmd, "inactive"); + bool all = vshCommandOptBool(cmd, "all"); + bool active = !inactive || all; int *ids = NULL, maxid = 0, i; char **names = NULL; int maxname = 0; @@ -1317,7 +1317,7 @@ cmdDomstate(vshControl *ctl, const vshCmd *cmd) { virDomainPtr dom; bool ret = true; - int showReason = vshCommandOptBool(cmd, "reason"); + bool showReason = vshCommandOptBool(cmd, "reason"); int state, reason; if (!vshConnectionUsability(ctl, ctl->conn)) @@ -1966,9 +1966,9 @@ cmdDomIftune(vshControl *ctl, const vshCmd *cmd) int nparams = 0; virTypedParameterPtr params = NULL; bool ret = false; - int current = vshCommandOptBool(cmd, "current"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); virNetDevBandwidthRate inbound, outbound; int i; @@ -2626,7 +2626,7 @@ cmdCreate(vshControl *ctl, const vshCmd *cmd) bool ret = true; char *buffer; #ifndef WIN32 - int console = vshCommandOptBool(cmd, "console"); + bool console = vshCommandOptBool(cmd, "console"); #endif unsigned int flags = VIR_DOMAIN_NONE; @@ -3094,7 +3094,7 @@ cmdStart(vshControl *ctl, const vshCmd *cmd) virDomainPtr dom; bool ret = false; #ifndef WIN32 - int console = vshCommandOptBool(cmd, "console"); + bool console = vshCommandOptBool(cmd, "console"); #endif unsigned int flags = VIR_DOMAIN_NONE; int rc; @@ -3786,9 +3786,9 @@ cmdSchedinfo(vshControl *ctl, const vshCmd *cmd) int i, ret; bool ret_val = false; unsigned int flags = 0; - int current = vshCommandOptBool(cmd, "current"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); if (current) { if (live || config) { @@ -4921,11 +4921,11 @@ cmdVcpucount(vshControl *ctl, const vshCmd *cmd) { virDomainPtr dom; bool ret = true; - int maximum = vshCommandOptBool(cmd, "maximum"); - int active = vshCommandOptBool(cmd, "active"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); - int current = vshCommandOptBool(cmd, "current"); + bool maximum = vshCommandOptBool(cmd, "maximum"); + bool active = vshCommandOptBool(cmd, "active"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); bool all = maximum + active + current + config + live == 0; int count; @@ -5246,9 +5246,9 @@ cmdVcpuPin(vshControl *ctl, const vshCmd *cmd) int i, cpu, lastcpu, maxcpu, ncpus; bool unuse = false; const char *cur; - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); - int current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); bool query = false; /* Query mode if no cpulist */ unsigned int flags = 0; @@ -5479,10 +5479,10 @@ cmdSetvcpus(vshControl *ctl, const vshCmd *cmd) virDomainPtr dom; int count = 0; bool ret = true; - int maximum = vshCommandOptBool(cmd, "maximum"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); - int current = vshCommandOptBool(cmd, "current"); + bool maximum = vshCommandOptBool(cmd, "maximum"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); unsigned int flags = 0; if (current) { @@ -5853,9 +5853,9 @@ cmdSetmem(vshControl *ctl, const vshCmd *cmd) unsigned long long max; unsigned long kibibytes = 0; bool ret = true; - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); - int current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); unsigned int flags = 0; if (current) { @@ -5935,9 +5935,9 @@ cmdSetmaxmem(vshControl *ctl, const vshCmd *cmd) unsigned long long max; unsigned long kibibytes = 0; bool ret = true; - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); - int current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); unsigned int flags = VIR_DOMAIN_MEM_MAXIMUM; if (current) { @@ -6026,9 +6026,9 @@ cmdBlkiotune(vshControl * ctl, const vshCmd * cmd) virTypedParameterPtr params = NULL, temp = NULL; bool ret = false; unsigned int flags = 0; - int current = vshCommandOptBool(cmd, "current"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); if (current) { if (live || config) { @@ -6201,9 +6201,9 @@ cmdMemtune(vshControl *ctl, const vshCmd *cmd) virTypedParameterPtr params = NULL, temp = NULL; bool ret = false; unsigned int flags = 0; - int current = vshCommandOptBool(cmd, "current"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); if (current) { if (live || config) { @@ -6365,9 +6365,9 @@ cmdNumatune(vshControl * ctl, const vshCmd * cmd) const char *nodeset = NULL; bool ret = false; unsigned int flags = 0; - int current = vshCommandOptBool(cmd, "current"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); const char *mode = NULL; if (current) { @@ -6831,9 +6831,9 @@ cmdDumpXML(vshControl *ctl, const vshCmd *cmd) bool ret = true; char *dump; unsigned int flags = 0; - int inactive = vshCommandOptBool(cmd, "inactive"); - int secure = vshCommandOptBool(cmd, "security-info"); - int update = vshCommandOptBool(cmd, "update-cpu"); + bool inactive = vshCommandOptBool(cmd, "inactive"); + bool secure = vshCommandOptBool(cmd, "security-info"); + bool update = vshCommandOptBool(cmd, "update-cpu"); if (inactive) flags |= VIR_DOMAIN_XML_INACTIVE; @@ -7800,9 +7800,9 @@ cmdBlkdeviotune(vshControl *ctl, const vshCmd *cmd) virTypedParameterPtr params = NULL, temp = NULL; unsigned int flags = 0, i = 0; int rv = 0; - int current = vshCommandOptBool(cmd, "current"); - int config = vshCommandOptBool(cmd, "config"); - int live = vshCommandOptBool(cmd, "live"); + bool current = vshCommandOptBool(cmd, "current"); + bool config = vshCommandOptBool(cmd, "config"); + bool live = vshCommandOptBool(cmd, "live"); bool ret = false; if (current) { @@ -8336,9 +8336,9 @@ static const vshCmdOptDef opts_network_list[] = { static bool cmdNetworkList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED) { - int inactive = vshCommandOptBool(cmd, "inactive"); - int all = vshCommandOptBool(cmd, "all"); - int active = !inactive || all ? 1 : 0; + bool inactive = vshCommandOptBool(cmd, "inactive"); + bool all = vshCommandOptBool(cmd, "all"); + bool active = !inactive || all; int maxactive = 0, maxinactive = 0, i; char **activeNames = NULL, **inactiveNames = NULL; inactive |= all; @@ -8609,9 +8609,9 @@ static const vshCmdOptDef opts_interface_list[] = { static bool cmdInterfaceList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED) { - int inactive = vshCommandOptBool(cmd, "inactive"); - int all = vshCommandOptBool(cmd, "all"); - int active = !inactive || all ? 1 : 0; + bool inactive = vshCommandOptBool(cmd, "inactive"); + bool all = vshCommandOptBool(cmd, "all"); + bool active = !inactive || all; int maxactive = 0, maxinactive = 0, i; char **activeNames = NULL, **inactiveNames = NULL; inactive |= all; @@ -8786,7 +8786,7 @@ cmdInterfaceDumpXML(vshControl *ctl, const vshCmd *cmd) bool ret = true; char *dump; unsigned int flags = 0; - int inactive = vshCommandOptBool(cmd, "inactive"); + bool inactive = vshCommandOptBool(cmd, "inactive"); if (inactive) flags |= VIR_INTERFACE_XML_INACTIVE; @@ -10038,7 +10038,7 @@ cmdPoolCreateAs(vshControl *ctl, const vshCmd *cmd) virStoragePoolPtr pool; const char *name; char *xml; - int printXML = vshCommandOptBool(cmd, "print-xml"); + bool printXML = vshCommandOptBool(cmd, "print-xml"); if (!vshConnectionUsability(ctl, ctl->conn)) return false; @@ -10126,7 +10126,7 @@ cmdPoolDefineAs(vshControl *ctl, const vshCmd *cmd) virStoragePoolPtr pool; const char *name; char *xml; - int printXML = vshCommandOptBool(cmd, "print-xml"); + bool printXML = vshCommandOptBool(cmd, "print-xml"); if (!vshConnectionUsability(ctl, ctl->conn)) return false; @@ -10400,10 +10400,10 @@ cmdPoolList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED) struct poolInfoText *poolInfoTexts = NULL; /* Determine the options passed by the user */ - int all = vshCommandOptBool(cmd, "all"); - int details = vshCommandOptBool(cmd, "details"); - int inactive = vshCommandOptBool(cmd, "inactive"); - int active = !inactive || all ? 1 : 0; + bool all = vshCommandOptBool(cmd, "all"); + bool details = vshCommandOptBool(cmd, "details"); + bool inactive = vshCommandOptBool(cmd, "inactive"); + bool active = !inactive || all; inactive |= all; /* Check the connection to libvirtd daemon is still working */ @@ -12062,7 +12062,7 @@ cmdVolList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED) char *outputStr = NULL; const char *unit; double val; - int details = vshCommandOptBool(cmd, "details"); + bool details = vshCommandOptBool(cmd, "details"); int numVolumes = 0, i; int ret; bool functionReturn; @@ -13006,7 +13006,7 @@ cmdNodeListDevices (vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED) const char *cap = NULL; char **devices; int num_devices, i; - int tree = vshCommandOptBool(cmd, "tree"); + bool tree = vshCommandOptBool(cmd, "tree"); if (!vshConnectionUsability(ctl, ctl->conn)) return false; -- 1.7.3.4

2 2

[libvirt] [PATCH] virsh: Clarify use of the --managed-save flag for the list command
by Peter Krempa 10 Apr '12

10 Apr '12

The documentation for the flag doesn't clearly state that the flag only enhances the output and the user needs to specify other flags to list inactive domains, that are enhanced by this flag. --- tools/virsh.c | 2 +- tools/virsh.pod | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index cfdd040..7477d32 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -924,7 +924,7 @@ static const vshCmdOptDef opts_list[] = { {"name", VSH_OT_BOOL, 0, N_("list domain names only")}, {"table", VSH_OT_BOOL, 0, N_("list table (default)")}, {"managed-save", VSH_OT_BOOL, 0, - N_("mark domains with managed save state")}, + N_("mark inactive domains with managed save state")}, {"title", VSH_OT_BOOL, 0, N_("show short domain description")}, {NULL, 0, 0, NULL} }; diff --git a/tools/virsh.pod b/tools/virsh.pod index a60e667..c6e0ff3 100644 --- a/tools/virsh.pod +++ b/tools/virsh.pod @@ -381,8 +381,9 @@ into s3 state. =back If I<--managed-save> is specified, then domains that have managed save -state (only possible if they are in the B<shut off> state) will -instead show as B<saved> in the listing. This flag is usable only with the +state (only possible if they are in the B<shut off> state, so you need to +specify I<--inactive> or I<--all> to actually list them) will instead +show as B<saved> in the listing. This flag is usable only with the default I<--table> output. If I<--name> is specified, domain names are printed instead of the table -- 1.7.3.4

2 2

[libvirt] [RESEND] libvirt: xen: Shutdown detection fixes (RH-BZ#746007)
by Stefan Bader 10 Apr '12

10 Apr '12

Resending this as there was no feedback overall and at least the first change fixes the following bug: https://bugzilla.redhat.com/show_bug.cgi?id=746007 --- The issue is easy to observe when using virt-manager as a frontend. Its main window seems to open connections for the up/down main display once and then only repeats DomainGetInfo on the same connection to check whether the instance is up or shut down. The initial open on the connection sets the domain id to -1 for inactive managed domains. And once running, the hypervisor driver returns the status. But after shutdown, the domain cannot be found by the hypervisor driver and the domain info is obtained by the xend driver. However, that expects the domain id to be -1 for inactive domains. This is not true (anymore). In testing I found that domain/status seems to be always present and better suited to check whether a domain is running or not (0 for shutdown and 2 for running, there are probably other values, too). Beside the change, which does fix this problem, the question is whether there should be a mechanism that resets domain->id to -1 when the instance is found to be shut down. And if that should happen, should it be done by any sub-driver or by the unified driver. The second problem I observed when I shut down an instance from the vnc console provided by virt-manager. As soon as the instance was down, the log produced internal errors about every second. Found this again, to be related to the unified driver approach. The call that causes the many error messages is GetVcpus. While the instance is up, the hypervisor driver returns those. But after shutdown, the domain cannot be found by that driver. The xend driver works, though. So what happens is that the hypervisor driver logs an internal error but the call succeeds because the xend driver returns successful. This generally opens the question whether a sub-driver should log any errors (at least not on error level, maybe debug)? The second patch only quiets down the one message I saw repeated that often. There are some other errors logged without any obvious problems interacting with the instances, but those are by far less often. -Stefan Please cc: me on replies as I am (yeah still) not subscribed to this m-l. Thanks.

2 10

[libvirt] [PATCH] tests: Fix libvirtdconftest in VPATH build
by Jiri Denemark 10 Apr '12

10 Apr '12

Without this, libvirtdconftest fails to build with "fatal error: daemon/libvirtd-config.h: No such file or directory" --- tests/Makefile.am | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/tests/Makefile.am b/tests/Makefile.am index 57358e9..c4d550f 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -6,6 +6,7 @@ SHELL = $(PREFERABLY_POSIX_SHELL) INCLUDES = \ + -I$(top_builddir) -I$(top_srcdir) \ -I$(top_builddir)/gnulib/lib -I$(top_srcdir)/gnulib/lib \ -I$(top_builddir)/include -I$(top_srcdir)/include \ -I$(top_builddir)/src -I$(top_srcdir)/src \ -- 1.7.8.5

2 1

[libvirt] libvirt starts KVM domain without -enable-kvm
by Reinier Schoof 10 Apr '12

10 Apr '12

Hey, we're running a VM-pool based on libvirt and QEMU/KVM. The host machines run debian 6 (squeeze). All VM's have a similar libvirt XML-definition. Since we've moved to the combination of Linux kernel 3.2.0-1 and libvirt 0.9.9 (installed from testing/wheezy repo's), we periodically notice poor performance of new(ly started) VM's and after inspection they turn out to be started without the qemu option -enable-kvm. In /var/log/libvirt/qemu/$VM-name.log a line like this is shown: 20529: error : qemuBuildCommandLine:3681 : unsupported configuration: the QEMU binary /usr/bin/kvm does not support kvm After a virsh destroy/start, using the same XML-definition, the VM is started WITH -enable-kvm. Looking at the libvirt source of 0.9.9, I can't imagine this being the result of a race condition or other strange circumstance: it simply parse 'qemu -help', which always give exactly the same output. I've tried reproducing the problem by continuously destroy, undefine, define and start the same VM and then grepping the kvm-commandline for the absence of -enable-kvm, without any result. The XML-definition includes <domain type='kvm'> and <emulator>/usr/bin/kvm</emulator> Does anyone recognize this behaviour of libvirt? Thanks, Reinier Schoof # virsh version Compiled against library: libvir 0.9.9 Using library: libvir 0.9.9 Using API: QEMU 0.9.9 Running hypervisor: QEMU 0.15.0 Linux 3.2.0-1-amd64 #1 SMP Fri Feb 17 05:17:36 UTC 2012 x86_64 GNU/Linux -- TransIP BV | https://www.transip.nl/

1 0

[libvirt] [PATCH] Fix comment about GNUTLS initialization/cleanup
by Daniel P. Berrange 10 Apr '12

10 Apr '12

From: "Daniel P. Berrange" <berrange(a)redhat.com> --- src/rpc/virnettlscontext.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-) diff --git a/src/rpc/virnettlscontext.c b/src/rpc/virnettlscontext.c index 74a61e0..7440c7a 100644 --- a/src/rpc/virnettlscontext.c +++ b/src/rpc/virnettlscontext.c @@ -1423,9 +1423,13 @@ void virNetTLSSessionFree(virNetTLSSessionPtr sess) * virNetTLS* because it initializes * underlying GnuTLS library. According to * it's documentation, it's safe to be called - * many times, but is not thread safe. Each - * call SHOULD be later followed by - * virNetTLSContextDeinit. + * many times, but is not thread safe. + * + * There is no corresponding "Deinit" / "Cleanup" + * function because there is no safe way to call + * 'gnutls_global_deinit' from a multi-threaded + * library, where other libraries linked into the + * application may also be using gnutls. */ void virNetTLSInit(void) { -- 1.7.7.6

2 1

[libvirt] Memory leak in libvirt / gnutls
by Richard W.M. Jones 10 Apr '12

10 Apr '12

I'm trying to track down: https://bugzilla.redhat.com/show_bug.cgi?id=810613 I *think* this is a libvirt bug, but I can only reproduce it on one machine, not on another machine that has a virtually identical setup. Anyway, something is confusing me about libvirt. In this commit: ---------------------------------------------------------------------- commit 74c75671331d284e1f777f9692b72e9737520bf0 Author: Michal Privoznik <mprivozn(a)redhat.com> Date: Thu Aug 18 10:44:08 2011 +0200 daemon: initialize GnuTLS When spice_tls is set but listen_tls is not, we don't initialize GnuTLS library. So any later gnutls call (e.g. during migration, where we initialize a certificate) will access uninitialized GnuTLS internal structs and throws an error. Although, we might now initialize GnuTLS twice, it is safe according to the documentation: This function can be called many times, but will only do something the first time. This patch creates 2 functions: virNetTLSInit and virNetTLSDeinit with respect to written above. ---------------------------------------------------------------------- ... a pair of functions called virNetTLSInit & virNetTLSDeinit are introduced, which would appear to do the right thing, calling first gnutls_global_init, then gnutls_global_deinit. This looks correct to me. However the above commit is later amended by this commit: ---------------------------------------------------------------------- commit eaddec976ef06457fee4a4ce86b8c7ee906183b7 Author: Michal Privoznik <mprivozn(a)redhat.com> Date: Wed Aug 24 16:16:45 2011 +0200 daemon: Move TLS initialization to virInitialize My previous patch 74c75671331d284e1f777f9692b72e9737520bf0 introduced a regression by removing TLS initialization from client. ---------------------------------------------------------------------- which removes virNetTLSDeinit. This appears to be a mistake, or at least I can't see the logical reason for it, and according to the gnutls docs, it would introduce a memory leak looking exactly like the one I am chasing down. The current code mentions virNetTLSDeinit only in a comment, and never calls gnutls_global_deinit. Any ideas? Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://et.redhat.com/~rjones/virt-top

3 3

[libvirt] [PATCH] Fix compilation error on 32bit
by Stefan Berger 10 Apr '12

10 Apr '12

Below code failed to compile on a 32 bit machine with error typewrappers.c: In function 'libvirt_intUnwrap': typewrappers.c:135:5: error: logical 'and' of mutually exclusive tests is always false [-Werror=logical-op] cc1: all warnings being treated as errors The patch fixes this error. Stefan --- python/typewrappers.c | 4 ++++ 1 file changed, 4 insertions(+) Index: libvirt-acl/python/typewrappers.c =================================================================== --- libvirt-acl.orig/python/typewrappers.c +++ libvirt-acl/python/typewrappers.c @@ -132,6 +132,7 @@ libvirt_intUnwrap(PyObject *obj, int *va if ((long_val == -1) && PyErr_Occurred()) return -1; +#if LONG_MAX != INT_MAX if (long_val >= INT_MIN && long_val <= INT_MAX) { *val = long_val; } else { @@ -139,6 +140,9 @@ libvirt_intUnwrap(PyObject *obj, int *va "Python int too large to convert to C int"); return -1; } +#else + *val = long_val; +#endif return 0; }

2 2

[libvirt] [PATCH 0/4] Replace daemon-conf test case
by Daniel P. Berrange 10 Apr '12

10 Apr '12

The daemon-conf test case is terminally broken by design, despite numerous patches over the years, due to its need to test functionality indirectly by running libvirtd. Replace it with a test case which directly unit tests the code in question.

2 9

[libvirt] [test-API PATCH 1/3] test-API: Get rid of utils/Python
by Osier Yang 10 Apr '12

10 Apr '12

test-API tends to only support testing via libvirt Python binding now, and moving it to utils makes sense. --- utils/{Python => }/XMLParser.py | 0 utils/{Python => }/check.py | 0 utils/{Python => }/env_parser.py | 0 utils/{Python => }/format.py | 0 utils/{Python => }/log.py | 0 utils/{Python => }/utils.py | 0 utils/{Python => }/xmlbuilder.py | 0 utils/{Python => }/xmlgenerator.py | 0 8 files changed, 0 insertions(+), 0 deletions(-) delete mode 100644 utils/Python/__init__.py rename utils/{Python => }/XMLParser.py (100%) rename utils/{Python => }/check.py (100%) rename utils/{Python => }/env_parser.py (100%) rename utils/{Python => }/format.py (100%) rename utils/{Python => }/log.py (100%) rename utils/{Python => }/utils.py (100%) rename utils/{Python => }/xmlbuilder.py (100%) rename utils/{Python => }/xmlgenerator.py (100%) diff --git a/utils/Python/__init__.py b/utils/Python/__init__.py deleted file mode 100644 index e69de29..0000000 diff --git a/utils/Python/XMLParser.py b/utils/XMLParser.py similarity index 100% rename from utils/Python/XMLParser.py rename to utils/XMLParser.py diff --git a/utils/Python/check.py b/utils/check.py similarity index 100% rename from utils/Python/check.py rename to utils/check.py diff --git a/utils/Python/env_parser.py b/utils/env_parser.py similarity index 100% rename from utils/Python/env_parser.py rename to utils/env_parser.py diff --git a/utils/Python/format.py b/utils/format.py similarity index 100% rename from utils/Python/format.py rename to utils/format.py diff --git a/utils/Python/log.py b/utils/log.py similarity index 100% rename from utils/Python/log.py rename to utils/log.py diff --git a/utils/Python/utils.py b/utils/utils.py similarity index 100% rename from utils/Python/utils.py rename to utils/utils.py diff --git a/utils/Python/xmlbuilder.py b/utils/xmlbuilder.py similarity index 100% rename from utils/Python/xmlbuilder.py rename to utils/xmlbuilder.py diff --git a/utils/Python/xmlgenerator.py b/utils/xmlgenerator.py similarity index 100% rename from utils/Python/xmlgenerator.py rename to utils/xmlgenerator.py -- 1.7.7.5

2 5