- Devel - libvirt List Archives

[libvirt] ANNOUNCE: libvirt 0.9.11.6 maintenance release
by Cole Robinson 09 Oct '12

09 Oct '12

libvirt 0.9.11.6 maintenance release is now available. This is libvirt 0.9.11 with additional bugfixes that have accumulated upstream since the initial release. This release can be downloaded at: http://libvirt.org/sources/stable_updates/libvirt-0.9.11.6.tar.gz Changes in this version: * remove dnsmasq command line parameter "--filterwin2k" * dnsmasq: avoid forwarding queries without a domain * security: Fix libvirtd crash possibility For info about past maintenance releases, see: http://wiki.libvirt.org/page/Maintenance_Releases Thanks, Cole

3 3

[libvirt] [PATCH] hooks: let virCommand do the error reporting
by Eric Blake 09 Oct '12

09 Oct '12

The code was reporting raw exit status without decoding it into normal vs. signal exit. virCommandRun already does this, but with a different error type, so all we have to do is recast the error to the correct type. Reported by li guang. * src/util/hooks.c (virHookCall): Simplify. --- In response to: https://www.redhat.com/archives/libvir-list/2012-October/msg00308.html src/util/hooks.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/src/util/hooks.c b/src/util/hooks.c index f5890d2..8817a4e 100644 --- a/src/util/hooks.c +++ b/src/util/hooks.c @@ -1,7 +1,7 @@ /* * hooks.c: implementation of the synchronous hooks support * - * Copyright (C) 2010-2011 Red Hat, Inc. + * Copyright (C) 2010-2012 Red Hat, Inc. * Copyright (C) 2010 Daniel Veillard * * This library is free software; you can redistribute it and/or @@ -206,7 +206,6 @@ virHookCall(int driver, char **output) { int ret; - int exitstatus; char *path; virCommandPtr cmd; const char *drvstr; @@ -279,12 +278,11 @@ virHookCall(int driver, if (output) virCommandSetOutputBuffer(cmd, output); - ret = virCommandRun(cmd, &exitstatus); - if (ret == 0 && exitstatus != 0) { - virReportError(VIR_ERR_HOOK_SCRIPT_FAILED, - _("Hook script %s %s failed with error code %d"), - path, drvstr, exitstatus); - ret = -1; + ret = virCommandRun(cmd, NULL); + if (ret < 0) { + /* Convert INTERNAL_ERROR into known error. */ + virErrorPtr err = virGetLastError(); + virReportError(VIR_ERR_HOOK_SCRIPT_FAILED, "%s", err->message); } virCommandFree(cmd); -- 1.7.11.4

2 3

[libvirt] [libvirt-designer][PATCH 1/2] spec: Update changelog
by Michal Privoznik 09 Oct '12

09 Oct '12

to reflect the brand new release --- libvirt-designer.spec.in | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/libvirt-designer.spec.in b/libvirt-designer.spec.in index 667366c..2ff7487 100644 --- a/libvirt-designer.spec.in +++ b/libvirt-designer.spec.in @@ -103,3 +103,6 @@ rm -rf $RPM_BUILD_ROOT %{_datadir}/gtk-doc/html/libvirt-designer %changelog + +Tue Oct 09 2012 Daniel P. Berrange <berrange(a)redhat.com> 0.0.1-1 +- created -- 1.7.8.6

2 5

[libvirt] [PATCH] doc: update description about user/group in qemu.conf
by Marcelo Cerri 09 Oct '12

09 Oct '12

As a side effect of changes in the functions virGetUserID and virGetGroupID, the user and group configurations for DAC in qemu.conf are now able to accept both names and IDs, supporting a leading plus sign to ensure that a numeric value will not be interpreted as a name. This patch updates the comments in qemu.conf, including a description of this new behavior. --- src/qemu/qemu.conf | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index 18105ca..dd853c8 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -180,10 +180,25 @@ # guests will be blocked. Defaults to 0. #security_require_confined = 1 -# The user ID for QEMU processes run by the system instance. +# The user for QEMU processes run by the system instance. It can be +# specified as a user name or as a user id. The qemu driver will try to +# parse this value first as a name and then, if the name doesn't exist, +# as a user id. +# +# Since a sequence of digits is a valid user name, a leading plus sign +# can be used to ensure that a user id will not be interpreted as a user +# name. +# +# Some examples of valid values are: +# +# user = "qemu" # A user named "qemu" +# user = "+0" # Super user (uid=0) +# user = "100" # A user named "100" or a user with uid=100 +# #user = "root" -# The group ID for QEMU processes run by the system instance. +# The group for QEMU processes run by the system instance. It can be +# specified in a similar way to user. #group = "root" # Whether libvirt should dynamically change file ownership -- 1.7.12

2 1

[libvirt] [PATCH] nodeinfo: Fully convert to new virReportError
by Michal Privoznik 09 Oct '12

09 Oct '12

With our latest s/[a-z]+ReportError/virReportError/ rewrite (47ab34e2) we forgot to update arm part of the code. --- Thanks to my masochist idea of compiling libvirt on my Raspberry PI I've discovered this. Pushing under trivial & build breaker (on arm platforms obviously) rules. For those who are interested, it took ages and we don't build cleanly: http://pastebin.com/dkrJaV5Z But I am not sure how to fix those 'cast increases required alignment of target type' warnings. And I am not sure anybody else is ever going to use libvirt on arm. src/nodeinfo.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/nodeinfo.c b/src/nodeinfo.c index 4cbfe63..c0e60d8 100644 --- a/src/nodeinfo.c +++ b/src/nodeinfo.c @@ -423,8 +423,8 @@ int linuxNodeInfoCPUPopulate(FILE *cpuinfo, buf++; if (*buf != ':' || !buf[1]) { - nodeReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("parsing cpu MHz from cpuinfo")); + virReportError(VIR_ERR_INTERNAL_ERROR, + "%s", _("parsing cpu MHz from cpuinfo")); goto cleanup; } -- 1.7.8.6

3 2

[libvirt] [PATCH] docs: Drop useless </p> in drvphyp.html.in
by Michal Privoznik 09 Oct '12

09 Oct '12

--- Pushing under trivial rule. docs/drvphyp.html.in | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/docs/drvphyp.html.in b/docs/drvphyp.html.in index 0bd20dd..50e26b2 100644 --- a/docs/drvphyp.html.in +++ b/docs/drvphyp.html.in @@ -43,6 +43,5 @@ phyp://user@ivm/system (IVM connection) <pre> phyp://[username@]{hmc|ivm}/managed_system </pre> - </p> </body></html> -- 1.7.8.6

1 0

[libvirt] [PATCH v2 0/2] extend virGetUserID and virGetGroupID
by Marcelo Cerri 09 Oct '12

09 Oct '12

This patch series moves the logic for parsing users and groups in a similar way to coreutils' chown from security_dac.c to util.c, as suggested by Eric Blake. This change has two majors side effects: 1. Some error messages that were issued when security_dac.c tried to parse an ID as a name are no longer issued. 2. The keys `user` and `group` in qemu.conf can now be defined in the same way that in DAC security labels. Peter Krempa's fix for correctly handling errors returned by getpwnam_r and getgrnam_r is squashed into this patch series. Marcelo Cerri (2): util: extend virGetUserID and virGetGroupID to support names and IDs security: update user and group parsing in security_dac.c src/security/security_dac.c | 45 +++----------- src/util/util.c | 143 ++++++++++++++++++++++++++++++++------------ 2 files changed, 112 insertions(+), 76 deletions(-) -- 1.7.12

2 4

[libvirt] [PATCH 0/3] Cleanly save session VMs on logout/shutdown
by Alexander Larsson 09 Oct '12

09 Oct '12

Atm, when you exit the sessin (via logout or shutdown for instance) we just leave the qemu:///session handling libvirtd process around, including any running VMs. This is not particularly nice, as there is no way to know that the VMs are running, and you risk data loss if you shutdown while the VMs are running. This patch series adds a babysitter to the session that will track session lifetime and shutdown events and save running VMs as needed. Outstanding questions: Can this code be inside libvirtd itself? I.E. is it possible to do VM management calls like virDomainManagedSave() from inside libvirtd itself. If not, who will launch the babysitter? Alexander Larsson (3): Fix typo in HAVE_DBUS automake conditional virdbus: Add virDBusGetSessionBus helper Add new libvirt-babysitter tool configure.ac | 2 +- src/util/virdbus.c | 84 ++++++++++---- src/util/virdbus.h | 1 + tools/Makefile.am | 21 ++++ tools/libvirt-babysitter.c | 276 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 363 insertions(+), 21 deletions(-) create mode 100644 tools/libvirt-babysitter.c -- 1.7.12.1

4 9

[libvirt] [PATCH 00/12] Structured syslog (Lumberjack/CEE) support
by Miloslav Trmač 09 Oct '12

09 Oct '12

This patch set adds structured syslog support to libvirt. In short, the idea is to embed JSON in a syslog record. This format is used in a new log output type called "syslog/json". Example "syslog/json" record (line-wrapped for readability): Sep 20 19:59:40 kulicka libvirt: @cee: {"msg":"libvirt version: 0.10.1", "category":"../../src/test/test_driver.c","priority":"info", "funcname":"virLogVMessage","line":769, "timestamp":"2012-09-20 17:59:40.853+0000"} compared with existing "syslog" record format: Sep 20 20:02:24 kulicka libvirt: 5896: info : libvirt version: 0.10.1 This JSON embedding format is defined by the Lumberjack project led by the major Open Source syslog implementations (https://fedorahosted.org/lumberjack/) The format is also a base for a future MITRE CEE standard. Some of the fields are specified at https://fedorahosted.org/lumberjack/wiki/FieldList , but applications are free to use whatever fields make sense for them. The JSON structure makes easy to process logs by programs without writing code that understands the specific format used by each application, or using unreliable regexps (https://fedorahosted.org/ceelog/ is a companion project that allows processing such logs). Current systems will store and these records unmodified and present them to users unmodified, but tools (and probably /var/log/messages) will be able to show only the "msg" field; this allows us to add more detailed information without worsening the user experience (the example above already shows added information that is currently being thrown away when logging to syslog). The patch set, aside from building the required infrastructure, has two main components: * Add the "syslog/json" output type, and use it to record all information passed to virLogMessage. The example result is shown above. This primarily makes it easier to parse the message. * Allow callers of virLogMessage to add arbitrary additional JSON fields, and use it in virRaiseErrorFull and its callers. Because the additional fields for errors include virErrorDomain and virErrorNumber, this allows _programs_ to _automatically_ detect the event and react to it, perhaps alerting the user about a situation that requires immediate attention, or automatically suggesting a solution. This has not been possible until now because the current logs contain only a translated error message, so the log record doesn't contain anything stable that could be detected by a program. It is assumed that other parts of libvirt may add more event-specific JSON fields in the future, based on demand by applications that process the logs; I have, however, no immediate plans to add more. Miloslav Trmač (12): Drop unused return value of virLogOutputFunc Add JSON API for preallocated objects. Split yajl_gen allocation into a separate function. Split adding object properties from virJSONValueToStringOne Add a JSON generator API. Pass the "raw" log message to each virLogOutputFunc Split priority conversion from virLogOutputToSyslog Add "syslog/json" log output format. Add a JSON properties parameter to virLog{,V}Message Add a JSON properties parameter to virLogOutputFunc Add detailed error information to JSON syslog Add a test for the new error reporting mechanism. docs/logging.html.in | 3 + src/libvirt_private.syms | 4 + src/uml/uml_conf.c | 2 +- src/util/json.c | 232 +++++++++++++++++++++++++++++++++++++++++----- src/util/json.h | 26 ++++++ src/util/logging.c | 233 ++++++++++++++++++++++++++++++++++------------- src/util/logging.h | 35 +++---- src/util/viraudit.c | 4 +- src/util/virterror.c | 32 ++++++- tests/Makefile.am | 6 +- tests/errorjsontest.c | 211 ++++++++++++++++++++++++++++++++++++++++++ tests/testutils.c | 7 +- 12 files changed, 684 insertions(+), 111 deletions(-) create mode 100644 tests/errorjsontest.c -- 1.7.11.4

4 24

[libvirt] [ANNOUNCE] libvirt-designer 0.0.1 release
by Daniel P. Berrange 09 Oct '12

09 Oct '12

I am pleased to announce that the first release of the libvirt-designer package, version 0.0.1, is now available from ftp://ftp.libvirt.org/libvirt/designer/ The packages are GPG signed with Key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF (4096R) New in this release: - Everything ! The libvirt-designer package provides a library that integrates libosinfo and libvirt-gconfig. Given an operating system identifier and libvirt host capabilities, it queries the libosinfo database to determine optimal hardware configuration and uses this information to design suitable domain XML for running the OS as a guest. In a similar manner it facilitates the setup of guest hardware devices such as disks, network interfaces, video cards, etc. These APIs are inspired by experience creating internal APIs for similar tasks in the virt-install/virt-manager projects. Since it builds on libosinfo and libvirt-gconfig, the libvirt-designer library relies on GObject introspection to provide access to its APIs for non-C programming languages. In addition it explicitly avoids a direct depedancy on libvirt.so, to enable usage by applications using alternative SNMP, CIM, etc bindings to libvirt, or those applications which simply need to construct libvirt XML without actually booting the guests afterwards. These early releases of libvirt-designer should be considered experimental. While we don't actively plan to change/break the API/ABI, we are not going to guarantee API/ABI stability of libvirt-designer at this time. Follow up comments about libvirt-designer should be directed to the regular libvir-list(a)redhat.com development list. Thanks to all the people involved in contributing to this release, in particular Michal who is actually doing the vast majority of the hard work here. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0