- Devel - libvirt List Archives

[libvirt] [PATCH] virsh: save: report an error if XML file can't be read
by Ján Tomko 16 Nov '12

16 Nov '12

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=876868 --- tools/virsh-domain.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c index 86ed4d3..df38618 100644 --- a/tools/virsh-domain.c +++ b/tools/virsh-domain.c @@ -2945,8 +2945,10 @@ doSave(void *opaque) goto out; if (xmlfile && - virFileReadAll(xmlfile, 8192, &xml) < 0) + virFileReadAll(xmlfile, 8192, &xml) < 0) { + vshReportError(ctl); goto out; + } if (((flags || xml) ? virDomainSaveFlags(dom, to, xml, flags) -- 1.7.8.6

2 1

[libvirt] [PATCH v2] sanlock: Retry after EINPROGRESS
by Michal Privoznik 15 Nov '12

15 Nov '12

It may take some time for sanlock to add a lockspace. And if user restart libvirtd service meanwhile, the fresh daemon can fail adding the same lockspace with EINPROGRESS. Recent sanlock has sanlock_inq_lockspace() function which should block until lockspace changes state. If we are building against older sanlock we should retry a few times before claiming an error. This issue can be easily reproduced: for i in {1..1000} ; do echo $i; service libvirtd restart; sleep 2; done 20 Stopping libvirtd daemon: [FAILED] Starting libvirtd daemon: [ OK ] 21 Stopping libvirtd daemon: [ OK ] Starting libvirtd daemon: [ OK ] 22 Stopping libvirtd daemon: [ OK ] Starting libvirtd daemon: [ OK ] error : virLockManagerSanlockSetupLockspace:334 : Unable to add lockspace /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__: Operation now in progress --- diff to v1: -after IRC discussion with sanlock devel I've found this API so whe ought use it whenever possible. configure.ac | 7 +++++++ src/locking/lock_driver_sanlock.c | 35 ++++++++++++++++++++++++++++++++--- 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/configure.ac b/configure.ac index 9108ea8..849d787 100644 --- a/configure.ac +++ b/configure.ac @@ -1223,6 +1223,13 @@ if test "x$with_sanlock" != "xno"; then AC_DEFINE_UNQUOTED([HAVE_SANLOCK_KILLPATH], 1, [whether Sanlock supports sanlock_killpath]) fi + + AC_CHECK_LIB([sanlock_client], [sanlock_inq_lockspace], + [sanlock_inq_lockspace=yes], [sanlock_inq_lockspace=no]) + if test "x$sanlock_inq_lockspace" = "xyes" ; then + AC_DEFINE_UNQUOTED([HAVE_SANLOCK_INQ_LOCKSPACE], 1, + [whether sanlock supports sanlock_inq_lockspace]) + fi fi fi AM_CONDITIONAL([HAVE_SANLOCK], [test "x$with_sanlock" = "xyes"]) diff --git a/src/locking/lock_driver_sanlock.c b/src/locking/lock_driver_sanlock.c index d24f3d6..430e11e 100644 --- a/src/locking/lock_driver_sanlock.c +++ b/src/locking/lock_driver_sanlock.c @@ -184,6 +184,11 @@ static int virLockManagerSanlockLoadConfig(const char *configFile) return 0; } +/* How much ms sleep before retrying to add a lockspace? */ +#define LOCKSPACE_SLEEP 100 +/* How many times try adding a lockspace? */ +#define LOCKSPACE_RETRIES 10 + static int virLockManagerSanlockSetupLockspace(void) { int fd = -1; @@ -192,6 +197,9 @@ static int virLockManagerSanlockSetupLockspace(void) struct sanlk_lockspace ls; char *path = NULL; char *dir = NULL; +#ifndef HAVE_SANLOCK_INQ_LOCKSPACE + int retries = LOCKSPACE_RETRIES; +#endif if (virAsprintf(&path, "%s/%s", driver->autoDiskLeasePath, @@ -318,11 +326,32 @@ static int virLockManagerSanlockSetupLockspace(void) } ls.host_id = driver->hostID; - /* Stage 2: Try to register the lockspace with the daemon. - * If the lockspace is already registered, we should get EEXIST back - * in which case we can just carry on with life + /* Stage 2: Try to register the lockspace with the daemon. If the lockspace + * is already registered, we should get EEXIST back in which case we can + * just carry on with life. If EINPROGRESS is returned, we have two options: + * either call a sanlock API that blocks us until lockspace changes state, + * or we can fallback to polling. */ +#ifndef HAVE_SANLOCK_INQ_LOCKSPACE +retry: +#endif if ((rv = sanlock_add_lockspace(&ls, 0)) < 0) { + if (-rv == EINPROGRESS) { +#ifdef HAVE_SANLOCK_INQ_LOCKSPACE + /* we have this function which blocks until lockspace change the + * state. It returns 0 if lockspace has been added, -ENOENT if it + * hasn't. XXX should we goto retry? */ + VIR_DEBUG("Inquiring lockspace"); + rv = sanlock_inq_lockspace(&ls, SANLK_INQ_WAIT); +#else + /* fall back to polling */ + if (retries--) { + usleep(LOCKSPACE_SLEEP * 1000); + VIR_DEBUG("Retrying to add lockspace (left %d)", retries); + goto retry; + } +#endif + } if (-rv != EEXIST) { if (rv <= -200) virReportError(VIR_ERR_INTERNAL_ERROR, -- 1.7.8.6

2 1

[libvirt] [libvirt-glib 1/2] Fix glib version check for g_type_init
by Christophe Fergeau 15 Nov '12

15 Nov '12

g_type_init has been deprecated in glib 2.35, not 2.34. With versions older than 2.35, we have to call it or we'll get a runtime failure. --- libvirt-gconfig/libvirt-gconfig-compat.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libvirt-gconfig/libvirt-gconfig-compat.h b/libvirt-gconfig/libvirt-gconfig-compat.h index 85a420d..3719896 100644 --- a/libvirt-gconfig/libvirt-gconfig-compat.h +++ b/libvirt-gconfig/libvirt-gconfig-compat.h @@ -25,7 +25,7 @@ #include <glib-object.h> -#if GLIB_CHECK_VERSION(2, 34, 0) +#if GLIB_CHECK_VERSION(2, 35, 0) #define g_type_init() #endif -- 1.8.0

3 7

[libvirt] [PATCH] qemu conf: Use host-model for cpu mode by default
by Ichikawa, Ken 15 Nov '12

15 Nov '12

Now, qemu guest's default cpu model is qemu32/64 and it can be configured per domain. In some case, host-model mode is suitable for getting enough performance in the guest because of features from cpu spec. This patch adds a config option to qemu.conf to use 'host-model' mode as default and allow users to use host-model mode in domains on a host. This is useful because - Guest owners don't need to touch their domain's config. - An administrator can reduce an item in their checklist for VM performance and guarantee all guests should run in the best performance. Signed-off-by: Ken ICHIKAWA <ichikawa.ken(a)jp.fujitsu.com> --- src/qemu/qemu.conf | 7 +++++++ src/qemu/qemu_command.c | 6 ++++++ src/qemu/qemu_conf.c | 4 ++++ src/qemu/qemu_conf.h | 1 + 4 files changed, 18 insertions(+) diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index dd853c8..5f60237 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -401,3 +401,10 @@ # Defaults to -1. # #seccomp_sandbox = 1 + + +# Use 'host-model' for cpu mode when cpu is not defined in +# domain xml file. +# 1 = on, 0 = off(default). +# +#make_default_cpu_host_model = 1 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 1e96982..8fdac2d 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -4111,6 +4111,12 @@ qemuBuildCpuArgStr(const struct qemud_driver *driver, else default_model = "qemu64"; + if (def->cpu == NULL && driver->makeDefaultCPUHostModel){ + if (VIR_ALLOC(def->cpu) < 0) + goto no_memory; + def->cpu->mode = VIR_CPU_MODE_HOST_MODEL; + } + if (def->cpu && (def->cpu->mode != VIR_CPU_MODE_CUSTOM || def->cpu->model)) { virCPUCompareResult cmp; diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c index dc4d680..92b9c38 100644 --- a/src/qemu/qemu_conf.c +++ b/src/qemu/qemu_conf.c @@ -575,6 +575,10 @@ int qemudLoadDriverConfig(struct qemud_driver *driver, CHECK_TYPE("seccomp_sandbox", VIR_CONF_LONG); if (p) driver->seccompSandbox = p->l; + p = virConfGetValue(conf, "make_default_cpu_host_model"); + CHECK_TYPE("make_default_cpu_host_model", VIR_CONF_LONG); + if (p) driver->makeDefaultCPUHostModel = p->l; + virConfFree(conf); return 0; } diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h index 2c7f70c..b0a76f4 100644 --- a/src/qemu/qemu_conf.h +++ b/src/qemu/qemu_conf.h @@ -156,6 +156,7 @@ struct qemud_driver { int keepAliveInterval; unsigned int keepAliveCount; int seccompSandbox; + unsigned int makeDefaultCPUHostModel; }; typedef struct _qemuDomainCmdlineDef qemuDomainCmdlineDef; -- 1.7.11.7

4 4

[libvirt] Release planning suggestions for next releases
by Daniel Veillard 15 Nov '12

15 Nov '12

I just checked and we have "only" 63 commits since 1.0.0 was released, so even if we were to increase the rate dramatically next week, it doesn't look like there is a high pressure for a release at the end of the month. Taking into account the extra factors that end of December is usually low traffic, and that I'm trying to take real vacations first week of December (nearly no internet access), I think we could slightly change the two next release schedules to accomodate those: - push 1.0.1 mid-December - push 1.0.2 at the end of January Did I miss a reason to not delay the push of 1.0.1 and keep it at the end of the month ? Or other problems with this plan ? Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 1

[libvirt] [PATCH 0/5] Structured error logging and syslog support
by Miloslav Trmač 15 Nov '12

15 Nov '12

This is sort of a v2 of the "Structured syslog" series. Patches 1-4 allow callers virLogMessage to add arbitrary additional data, and use it in virRaiseErrorFull and its callers. This data is sent to journal (and ignored for other outputs). Because the additional fields for errors include virErrorDomain and virErrorNumber, this allows _programs_ to _automatically_ detect the event and react to it, perhaps alerting the user. Patch 5 adds the "syslog/json" log output type, in a way that is comparably async-signal-safe to the other log outputs (i.e. it's not safe by the letter of the standard, but safe in practice). I still think that having this format output is desirable, but I'll accept it if you decide that it is not wanted in libvirt. Miloslav Trmač (5): Add a metadata parameter to virLog{,V}Message Add metadata to virLogOutputFunc Use helper functions to format the journal iov array Add detailed error information to journal Add "syslog/json" log output format. docs/logging.html.in | 3 + src/util/logging.c | 445 +++++++++++++++++++++++++++++++++++++++++++-------- src/util/logging.h | 27 +++- src/util/viraudit.c | 4 +- src/util/virterror.c | 33 +++- tests/testutils.c | 1 + 6 files changed, 437 insertions(+), 76 deletions(-) -- 1.7.11.7

4 13

[libvirt] [PATCH v2] qemu: Allow the user to specify vendor and product for disk
by Osier Yang 15 Nov '12

15 Nov '12

QEMU supports to set vendor and product strings for disk since 1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch exposes it with new XML elements <vendor> and <product> of disk device. --- docs/formatdomain.html.in | 12 ++++++ docs/schemas/domaincommon.rng | 10 +++++ src/conf/domain_conf.c | 42 ++++++++++++++++++++ src/conf/domain_conf.h | 2 + src/libvirt_private.syms | 1 + src/qemu/qemu_command.c | 29 +++++++++++++ src/util/util.c | 12 ++++++ src/util/util.h | 2 + ...qemuxml2argv-disk-scsi-disk-vpd-build-error.xml | 35 ++++++++++++++++ ...qemuxml2argv-disk-scsi-disk-vpd-parse-error.xml | 36 +++++++++++++++++ .../qemuxml2argv-disk-scsi-disk-vpd.args | 13 ++++++ .../qemuxml2argv-disk-scsi-disk-vpd.xml | 36 +++++++++++++++++ tests/qemuxml2argvtest.c | 12 ++++++ 13 files changed, 242 insertions(+), 0 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-build-error.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-parse-error.xml create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.args create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.xml diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index c8da33d..a5a7418 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -1657,6 +1657,18 @@ of 16 hexadecimal digits. Since 0.10.1 </dd> + <dt><code>vendor</code></dt> + <dd>If present, this element specifies the vendor of a virtual hard + disk or CD-ROM device. It must not be longer than 8 alphanumeric + characters. + Since 1.0.1 + </dd> + <dt><code>product</code></dt> + <dd>If present, this element specifies the product of a virtual hard + disk or CD-ROM device. It must not be longer than 16 alphanumeric + characters. + Since 1.0.1 + </dd> <dt><code>host</code></dt> <dd>The <code>host</code> element has two attributes "name" and "port", which specify the hostname and the port number. The meaning of this diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 2beb035..ed7d1d0 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -905,6 +905,16 @@ <ref name="wwn"/> </element> </optional> + <optional> + <element name="vendor"> + <text/> + </element> + </optional> + <optional> + <element name="product"> + <text/> + </element> + </optional> </interleave> </define> <define name="snapshot"> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 99f03a9..e2f729e 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -979,6 +979,8 @@ void virDomainDiskDefFree(virDomainDiskDefPtr def) VIR_FREE(def->mirror); VIR_FREE(def->auth.username); VIR_FREE(def->wwn); + VIR_FREE(def->vendor); + VIR_FREE(def->product); if (def->auth.secretType == VIR_DOMAIN_DISK_SECRET_TYPE_USAGE) VIR_FREE(def->auth.secret.usage); virStorageEncryptionFree(def->encryption); @@ -3498,6 +3500,8 @@ cleanup: goto cleanup; } +#define VENDOR_LEN 8 +#define PRODUCT_LEN 16 /* Parse the XML definition for a disk * @param node XML nodeset to parse for disk definition @@ -3550,6 +3554,8 @@ virDomainDiskDefParseXML(virCapsPtr caps, char *logical_block_size = NULL; char *physical_block_size = NULL; char *wwn = NULL; + char *vendor = NULL; + char *product = NULL; if (VIR_ALLOC(def) < 0) { virReportOOMError(); @@ -3888,6 +3894,36 @@ virDomainDiskDefParseXML(virCapsPtr caps, if (!virValidateWWN(wwn)) goto error; + } else if (!vendor && + xmlStrEqual(cur->name, BAD_CAST "vendor")) { + vendor = (char *)xmlNodeGetContent(cur); + + if (strlen(vendor) > VENDOR_LEN) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("disk vendor is more than 8 characters")); + goto error; + } + + if (!virStrIsAlpha(vendor)) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("disk vendor is not alphanemuric string")); + goto error; + } + } else if (!product && + xmlStrEqual(cur->name, BAD_CAST "product")) { + product = (char *)xmlNodeGetContent(cur); + + if (strlen(vendor) > PRODUCT_LEN) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("disk product is more than 16 characters")); + goto error; + } + + if (!virStrIsAlpha(product)) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("disk product is not alphanemuric string")); + goto error; + } } else if (xmlStrEqual(cur->name, BAD_CAST "boot")) { /* boot is parsed as part of virDomainDeviceInfoParseXML */ } @@ -4184,6 +4220,10 @@ virDomainDiskDefParseXML(virCapsPtr caps, serial = NULL; def->wwn = wwn; wwn = NULL; + def->vendor = vendor; + vendor = NULL; + def->product = product; + product = NULL; if (driverType) { def->format = virStorageFileFormatTypeFromString(driverType); @@ -4257,6 +4297,8 @@ cleanup: VIR_FREE(logical_block_size); VIR_FREE(physical_block_size); VIR_FREE(wwn); + VIR_FREE(vendor); + VIR_FREE(product); ctxt->node = save_ctxt; return def; diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 6539281..c7c1ca6 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -591,6 +591,8 @@ struct _virDomainDiskDef { char *serial; char *wwn; + char *vendor; + char *product; int cachemode; int error_policy; /* enum virDomainDiskErrorPolicy */ int rerror_policy; /* enum virDomainDiskErrorPolicy */ diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 5a07139..3bcdf68 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1279,6 +1279,7 @@ virSetUIDGID; virSkipSpaces; virSkipSpacesAndBackslash; virSkipSpacesBackwards; +virStrIsAlpha; virStrToDouble; virStrToLong_i; virStrToLong_l; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 1e96982..ec2bbd8 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -2428,6 +2428,13 @@ qemuBuildDriveDevStr(virDomainDefPtr def, } } + if ((disk->vendor || disk->product) && + disk->bus != VIR_DOMAIN_DISK_BUS_SCSI) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Only scsi disk supports vendor and product")); + goto error; + } + if (disk->device == VIR_DOMAIN_DISK_DEVICE_LUN) { /* make sure that both the bus and the qemu binary support * type='lun' (SG_IO). @@ -2455,6 +2462,11 @@ qemuBuildDriveDevStr(virDomainDefPtr def, _("Setting wwn is not supported for lun device")); goto error; } + if (disk->vendor || disk->product) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Setting vendor or product is not supported for lun device")); + goto error; + } } switch (disk->bus) { @@ -2504,6 +2516,17 @@ qemuBuildDriveDevStr(virDomainDefPtr def, goto error; } + /* Properties wwn, vendor and product were introduced in the + * same QEMU release (1.2.0). + */ + if ((disk->vendor || disk->product) && + !qemuCapsGet(caps, QEMU_CAPS_SCSI_DISK_WWN)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Setting vendor or product for scsi disk is not " + "supported by this QEMU")); + goto error; + } + controllerModel = virDomainDiskFindControllerModel(def, disk, VIR_DOMAIN_CONTROLLER_TYPE_SCSI); @@ -2649,6 +2672,12 @@ qemuBuildDriveDevStr(virDomainDefPtr def, if (disk->wwn) virBufferAsprintf(&opt, ",wwn=%s", disk->wwn); + if (disk->vendor) + virBufferAsprintf(&opt, ",vendor=%s", disk->vendor); + + if (disk->product) + virBufferAsprintf(&opt, ",product=%s", disk->product); + if (virBufferError(&opt)) { virReportOOMError(); goto error; diff --git a/src/util/util.c b/src/util/util.c index 75b18c1..26a22c4 100644 --- a/src/util/util.c +++ b/src/util/util.c @@ -3114,3 +3114,15 @@ virValidateWWN(const char *wwn) { return true; } + +bool +virStrIsAlpha(const char *str) +{ + int i; + + for (i = 0; str[i]; i++) + if (!c_isalnum(str[i])) + return false; + + return true; +} diff --git a/src/util/util.h b/src/util/util.h index 4316ab1..64e047c 100644 --- a/src/util/util.h +++ b/src/util/util.h @@ -280,4 +280,6 @@ bool virIsDevMapperDevice(const char *dev_name) ATTRIBUTE_NONNULL(1); bool virValidateWWN(const char *wwn); +bool virStrIsAlpha(const char *str); + #endif /* __VIR_UTIL_H__ */ diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-build-error.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-build-error.xml new file mode 100644 index 0000000..6ed363b --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-build-error.xml @@ -0,0 +1,35 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='cdrom'> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='sda' bus='virtio'/> + <vendor>SEAGATE</vendor> + <product>ST3146707LC</product> + </disk> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='sdb' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + <vendor>SEAGATE</vendor> + <product>ST3567807GD</product> + </disk> + <controller type='usb' index='0'/> + <controller type='scsi' index='0' model='virtio-scsi'/> + <controller type='scsi' index='1' model='lsilogic'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-parse-error.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-parse-error.xml new file mode 100644 index 0000000..b2b127d --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd-parse-error.xml @@ -0,0 +1,36 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='cdrom'> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='sda' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='1' unit='0'/> + <vendor>SEAGATE1111</vendor> + <product>ST_3146707LC</product> + </disk> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='sdb' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + <vendor>SEAGATE</vendor> + <product>ST3567807GD</product> + </disk> + <controller type='usb' index='0'/> + <controller type='scsi' index='0' model='virtio-scsi'/> + <controller type='scsi' index='1' model='lsilogic'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.args b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.args new file mode 100644 index 0000000..4aefb7f --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.args @@ -0,0 +1,13 @@ +LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test \ +/usr/bin/qemu -S -M pc -m 214 -smp 1 -nographic -nodefconfig -nodefaults \ +-monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ +-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \ +-device lsi,id=scsi1,bus=pci.0,addr=0x4 \ +-usb \ +-drive file=/dev/HostVG/QEMUGuest1,if=none,id=drive-scsi0-0-1-0 \ +-device scsi-cd,bus=scsi0.0,channel=0,scsi-id=1,lun=0,drive=drive-scsi0-0-1-0,\ +id=scsi0-0-1-0,vendor=SEAGATE,product=ST3146707LC \ +-drive file=/dev/HostVG/QEMUGuest2,if=none,id=drive-scsi0-0-0-0 \ +-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,\ +id=scsi0-0-0-0,vendor=SEAGATE,product=ST3567807GD \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.xml b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.xml new file mode 100644 index 0000000..4918e37 --- /dev/null +++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-vpd.xml @@ -0,0 +1,36 @@ +<domain type='qemu'> + <name>QEMUGuest1</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu</emulator> + <disk type='block' device='cdrom'> + <source dev='/dev/HostVG/QEMUGuest1'/> + <target dev='sda' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='1' unit='0'/> + <vendor>SEAGATE</vendor> + <product>ST3146707LC</product> + </disk> + <disk type='block' device='disk'> + <source dev='/dev/HostVG/QEMUGuest2'/> + <target dev='sdb' bus='scsi'/> + <address type='drive' controller='0' bus='0' target='0' unit='0'/> + <vendor>SEAGATE</vendor> + <product>ST3567807GD</product> + </disk> + <controller type='usb' index='0'/> + <controller type='scsi' index='0' model='virtio-scsi'/> + <controller type='scsi' index='1' model='lsilogic'/> + <memballoon model='virtio'/> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index 48e09ab..651351b 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -505,6 +505,18 @@ mymain(void) QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI_PCI, QEMU_CAPS_SCSI_DISK_WWN); + DO_TEST("disk-scsi-disk-vpd", + QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG, + QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI_PCI, + QEMU_CAPS_SCSI_DISK_WWN); + DO_TEST_PARSE_ERROR("disk-scsi-disk-vpd-parse-error", + QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG, + QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI_PCI, + QEMU_CAPS_SCSI_DISK_WWN); + DO_TEST_FAILURE("disk-scsi-disk-vpd-build-error", + QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG, + QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI_PCI, + QEMU_CAPS_SCSI_DISK_WWN); DO_TEST("disk-scsi-vscsi", QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG); DO_TEST("disk-scsi-virtio-scsi", -- 1.7.7.6

2 2

[libvirt] [PATCH 1/2] init qemu_driver's qemuImgBinary field
by liguang 15 Nov '12

15 Nov '12

Signed-off-by: liguang <lig.fnst(a)cn.fujitsu.com> --- src/qemu/qemu_domain.c | 2 +- src/qemu/qemu_driver.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index a5592b9..eb5a3d1 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -1647,7 +1647,7 @@ qemuDomainSnapshotForEachQcow2Raw(struct qemud_driver *driver, int i; bool skipped = false; - qemuimgarg[0] = qemuFindQemuImgBinary(driver); + qemuimgarg[0] = driver->qemuImgBinary; if (qemuimgarg[0] == NULL) { /* qemuFindQemuImgBinary set the error */ return -1; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 5f91688..a25fb53 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -626,6 +626,9 @@ qemudStartup(int privileged) { if (!qemu_driver->domainEventState) goto error; + /* find kvm-img or qemu-img */ + qemuFindQemuImgBinary(qemu_driver); + /* read the host sysinfo */ if (privileged) qemu_driver->hostsysinfo = virSysinfoRead(); -- 1.7.1

4 9

[libvirt] [PATCH v3] Autogenerate AUTHORS
by Cole Robinson 14 Nov '12

14 Nov '12

AUTHORS.in tracks the maintainers, as well as some folks who were previously in AUTHORS but don't have a git commit with proper attribution. Generated output is sorted alphabetically and lacks pretty spacing, so tweak AUTHORS.in to follow the same format. Additionally, drop the syntax-check rule that previously validated AUTHORS against git log. --- I couldn't get the latter chunk of sed magic working... and since nothing really makes me reach my frustration limit faster than Makefiles and shell trickery, I just stuck with the basic changes. v3: Fix VPATH builds Use sort -u Sort AUTHORS.in Condense bootstrap.conf change .gitignore | 1 + .mailmap | 15 +++- AUTHORS | 279 --------------------------------------------------------- AUTHORS.in | 90 +++++++++++++++++++ Makefile.am | 12 ++- bootstrap.conf | 4 +- cfg.mk | 15 ---- 7 files changed, 118 insertions(+), 298 deletions(-) delete mode 100644 AUTHORS create mode 100644 AUTHORS.in diff --git a/.gitignore b/.gitignore index c185cbc..804eda4 100644 --- a/.gitignore +++ b/.gitignore @@ -26,6 +26,7 @@ .memdump .sc-start-sc_* /ABOUT-NLS +/AUTHORS /COPYING /ChangeLog /GNUmakefile diff --git a/.mailmap b/.mailmap index 98ff6dc..c430200 100644 --- a/.mailmap +++ b/.mailmap @@ -3,7 +3,6 @@ # Email consolidation: # <Preferred address in AUTHORS> <other alias used by same author> -<amy.griffis(a)hp.com> <aron.griffis(a)hp.com> <bozzolan(a)gmail.com> <redshift(a)gmx.com> <charles_duffy(a)messageone.com> <charles(a)dyfis.net> <dfj(a)redhat.com> <dfj(a)dfj.bne.redhat.com> @@ -35,6 +34,8 @@ <gerd(a)egidy.de> <gerd.von.egidy(a)intra2net.com> <benoar(a)dolka.fr> <benjamin.cama(a)telecom-bretagne.eu> <zhlcindy(a)linux.vnet.ibm.com> <zhlcindy(a)gmail.com> +<serge.hallyn(a)canonical.com> <serue(a)us.ibm.com> +<pritesh.kothari(a)sun.com> <Pritesh.Kothari(a)Sun.COM> # Name consolidation: # Preferred author spelling <preferred email> @@ -43,3 +44,15 @@ Royce Lv <lvroyce(a)linux.vnet.ibm.com> Daniel J Walsh <dwalsh(a)redhat.com> Ján Tomko <jtomko(a)redhat.com> Gerd von Egidy <gerd(a)egidy.de> +MATSUDA Daiki <matsudadik(a)intellilink.co.jp> +Tang Chen <tangchen(a)cn.fujitsu.com> +Peng Zhou <ailvpeng25(a)gmail.com> +Dirk Herrendoerfer <d.herrendoerfer(a)herrendoerfer.name> +Thibault VINCENT <thibault.vincent(a)smartjog.com> +Aurelien Rougemont <beorn(a)binaries.fr> +Serge E. Hallyn <serge.hallyn(a)canonical.com> +Henrik Persson E <henrik.e.persson(a)ericsson.com> +Philipp Hahn <hahn(a)univention.de> +Marco Bozzolan <bozzolan(a)gmail.com> +Marco Bozzolan <redshift(a)gmx.com> +Pritesh Kothari <pritesh.kothari(a)sun.com> diff --git a/AUTHORS b/AUTHORS deleted file mode 100644 index 27c4eda..0000000 --- a/AUTHORS +++ /dev/null @@ -1,279 +0,0 @@ - libvirt Authors - =============== - -The libvirt project was initiated by: - - Daniel Veillard <veillard(a)redhat.com> or <daniel(a)veillard.com> - -The primary maintainers and people with commit access rights: - - Daniel Veillard <veillard(a)redhat.com> - Daniel Berrange <berrange(a)redhat.com> - Richard W.M. Jones <rjones(a)redhat.com> - Mark McLoughlin <markmc(a)redhat.com> - Anthony Liguori <aliguori(a)us.ibm.com> - Jim Meyering <meyering(a)redhat.com> - Jim Fehlig <jfehlig(a)suse.com> - Chris Lalancette <clalance(a)redhat.com> - Cole Robinson <crobinso(a)redhat.com> - Guido Günther <agx(a)sigxcpu.org> - John Levon <john.levon(a)sun.com> - Matthias Bolte <matthias.bolte(a)googlemail.com> - Jiří Denemark <jdenemar(a)redhat.com> - Dave Allan <dallan(a)redhat.com> - Laine Stump <laine(a)redhat.com> - Stefan Berger <stefanb(a)us.ibm.com> - Eric Blake <eblake(a)redhat.com> - Justin Clift <jclift(a)redhat.com> - Osier Yang <jyang(a)redhat.com> - Wen Congyang <wency(a)cn.fujitsu.com> - Michal Prívozník <mprivozn(a)redhat.com> - Peter Krempa <pkrempa(a)redhat.com> - Christophe Fergeau <cfergeau(a)redhat.com> - Alex Jia <ajia(a)redhat.com> - Martin Kletzander <mkletzan(a)redhat.com> - -Previous maintainers: - Karel Zak <kzak(a)redhat.com> - Atsushi SAKAI <sakaia(a)jp.fujitsu.com> - Dave Leskovec <dlesko(a)linux.vnet.ibm.com> - Dan Smith <danms(a)us.ibm.com> - -Patches have also been contributed by: - - David Lutterkort <dlutter(a)redhat.com> - Andrew Puch <apuch(a)redhat.com> - Philippe Berthault <philippe.berthault(a)Bull.net> - Hugh Brock <hbrock(a)redhat.com> - Michel Ponceau <michel.ponceau(a)bull.net> - Jeremy Katz <katzj(a)redhat.com> - Pete Vetere <pvetere(a)redhat.com> - Kazuki Mizushima <mizushima.kazuk(a)jp.fujitsu.com> - Saori Fukuta <fukuta.saori(a)jp.fujitsu.com> - Tatsuro Enokura <fj7716hz(a)aa.jp.fujitsu.com> - Takahashi Tomohiro <takatom(a)jp.fujitsu.com> - Nobuhiro Itou <fj0873gn(a)aa.jp.fujitsu.com> - Masayuki Sunou <fj1826dm(a)aa.jp.fujitsu.com> - Mark Johnson <johnson.nh(a)gmail.com> - Christian Ehrhardt <ehrhardt(a)linux.vnet.ibm.com> - Shuveb Hussain <shuveb(a)binarykarma.com> - Jim Paris <jim(a)jtan.com> - Daniel Hokka Zakrisson <daniel(a)hozac.com> - Mads Chr. Olesen <shiyee(a)shiyee.dk> - Anton Protopopov <aspsk2(a)gmail.com> - Stefan de Konink <dekonink(a)kinkrsoftware.nl> - Kaitlin Rupert <kaitlin(a)linux.vnet.ibm.com> - Evgeniy Sokolov <evg(a)openvz.org> - David Lively <dlively(a)virtualiron.com> - Charles Duffy <Charles_Duffy(a)messageone.com> - Nguyen Anh Quynh <aquynh(a)gmail.com> - James Morris <jmorris(a)namei.org> - Chris Wright <chrisw(a)redhat.com> - Ben Guthro <ben.guthro(a)gmail.com> - Shigeki Sakamoto <fj0588di(a)aa.jp.fujitsu.com> - Gerd von Egidy <gerd(a)egidy.de> - Itamar Heim <iheim(a)redhat.com> - Markus Armbruster <armbru(a)redhat.com> - Ryota Ozaki <ozaki.ryota(a)gmail.com> - Daniel J Walsh <dwalsh(a)redhat.com> - Maximilian Wilhelm <max(a)rfc2324.org> - Pritesh Kothari <Pritesh.Kothari(a)Sun.COM> - Amit Shah <amit.shah(a)redhat.com> - Florian Vichot <florian.vichot(a)diateam.net> - Serge E. Hallyn <serue(a)us.ibm.com> - Soren Hansen <soren(a)linux2go.dk> - Abel Míguez Rodríguez<amiguezr(a)pdi.ucm.es> - Doug Goldstein <cardoe(a)cardoe.com> - Javier Fontan <jfontan(a)gmail.com> - Federico Simoncelli <fsimonce(a)redhat.com> - Amy Griffis <amy.griffis(a)hp.com> - Henrik Persson E <henrik.e.persson(a)ericsson.com> - Satoru SATOH <satoru.satoh(a)gmail.com> - Paolo Bonzini <pbonzini(a)redhat.com> - Miloslav Trmač <mitr(a)redhat.com> - Jamie Strandboge <jamie(a)canonical.com> - Gerhard Stenzel <gerhard.stenzel(a)de.ibm.com> - Matthew Booth <mbooth(a)redhat.com> - Diego Elio Pettenò <flameeyes(a)gmail.com> - Adam Litke <agl(a)us.ibm.com> - Steve Yarmie <steve.yarmie(a)gmail.com> - Dan Kenigsberg <danken(a)redhat.com> - Yuji NISHIDA <nishidy(a)nict.go.jp> - Dustin Xiong <x_k_123(a)hotmail.com> - Rolf Eike Beer <eike(a)sf-mail.de> - Wolfgang Mauerer <wolfgang.mauerer(a)siemens.com> - Philipp Hahn <hahn(a)univention.de> - Ed Swierk <eswierk(a)aristanetworks.com> - Paolo Smiraglia <paolo.smiraglia(a)gmail.com> - Sharadha Prabhakar <sharadha.prabhakar(a)citrix.com> - Chris Wong <wongc-redhat(a)hoku.net> - Daniel Berteaud <daniel(a)firewall-services.com> - Dustin Kirkland <kirkland(a)canonical.com> - Luiz Capitulino <lcapitulino(a)redhat.com> - Ryan Harper <ryanh(a)us.ibm.com> - Spencer Shimko <sshimko(a)tresys.com> - Marco Bozzolan <bozzolan(a)gmail.com> - Alex Williamson <alex.williamson(a)redhat.com> - Ersek Laszlo <lacos(a)caesar.elte.hu> - Kenneth Nagin <NAGIN(a)il.ibm.com> - Klaus Ethgen <Klaus(a)Ethgen.de> - Bryan Kearney <bkearney(a)redhat.com> - Darry L. Pierce <dpierce(a)redhat.com> - David Jorm <dfj(a)redhat.com> - Eduardo Otubo <otubo(a)linux.vnet.ibm.com> - Garry Dolley <gdolley(a)arpnetworks.com> - Harshavardhana <harsha(a)gluster.com> - Jonas Eriksson <jonas.j.eriksson(a)ericsson.com> - Jun Koi <junkoi2004(a)gmail.com> - Olivier Fourdan <ofourdan(a)redhat.com> - Ron Yorston <rmy(a)tigress.co.uk> - Shahar Klein <shaharklein(a)yahoo.com> - Taizo ITO <taizo.ito(a)hde.co.jp> - Thomas Treutner <thomas(a)scripty.at> - Jean-Baptiste Rouault <jean-baptiste.rouault(a)diateam.net> - Марк Коренберг <socketpair(a)gmail.com> - Alan Pevec <apevec(a)redhat.com> - Aurelien Rougemont <beorn(a)binaries.fr> - Patrick Dignan <pat_dignan(a)dell.com> - Serge Hallyn <serge.hallyn(a)canonical.com> - Nikunj A. Dadhania <nikunj(a)linux.vnet.ibm.com> - Lai Jiangshan <laijs(a)cn.fujitsu.com> - Harsh Prateek Bora <harsh(a)linux.vnet.ibm.com> - John Morrissey <jwm(a)horde.net> - KAMEZAWA Hiroyuki <kamezawa.hiroyu(a)jp.fujitsu.com> - Hu Tao <hutao(a)cn.fujitsu.com> - Laurent Léonard <laurent(a)open-minds.org> - MORITA Kazutaka <morita.kazutaka(a)lab.ntt.co.jp> - Josh Durgin <josh.durgin(a)inktank.com> - Roopa Prabhu <roprabhu(a)cisco.com> - Paweł Krześniak <pawel.krzesniak(a)gmail.com> - Kay Schubert <kayegypt(a)web.de> - Marc-André Lureau <marcandre.lureau(a)redhat.com> - Juerg Haefliger <juerg.haefliger(a)hp.com> - Matthias Dahl <mdvirt(a)designassembly.de> - Niels de Vos <ndevos(a)redhat.com> - Davidlohr Bueso <dave(a)gnu.org> - Alon Levy <alevy(a)redhat.com> - Hero Phương <herophuong93(a)gmail.com> - Zdenek Styblik <stybla(a)turnovfree.net> - Gui Jianfeng <guijianfeng(a)cn.fujitsu.com> - Michal Novotny <minovotn(a)redhat.com> - Markus Groß <gross(a)univention.de> - Phil Petty <phpetty(a)cisco.com> - Taku Izumi <izumi.taku(a)jp.fujitsu.com> - Minoru Usui <usui(a)mxm.nes.nec.co.jp> - Tiziano Mueller <dev-zero(a)gentoo.org> - Thibault VINCENT <thibault.vincent(a)smartjog.com> - Naoya Horiguchi <n-horiguchi(a)ah.jp.nec.com> - Jesse Cook <code.crashenx(a)gmail.com> - Alexander Todorov <atodorov(a)otb.bg> - Richard Laager <rlaager(a)wiktel.com> - Mark Wu <dwu(a)redhat.com> - Yufang Zhang <yuzhang(a)redhat.com> - Supriya Kannery <supriyak(a)linux.vnet.ibm.com> - Dirk Herrendoerfer <d.herrendoerfer(a)herrendoerfer.name> - Taisuke Yamada <tai(a)rakugaki.org> - Heath Petersen <HeathPetersen(a)Kandre.com> - Neil Wilson <neil(a)aldur.co.uk> - Ohad Levy <ohadlevy(a)gmail.com> - Michael Chapman <mike(a)very.puzzling.org> - Daniel Gollub <gollub(a)b1-systems.de> - David S. Wang <dwang2(a)cisco.com> - Ruben Kerkhof <ruben(a)rubenkerkhof.com> - Scott Moser <smoser(a)ubuntu.com> - Guannan Ren <gren(a)redhat.com> - John Williams <john.williams(a)petalogix.com> - Michael Santos <michael.santos(a)gmail.com> - Oskari Saarenmaa <os(a)ohmu.fi> - Nan Zhang <nzhang(a)redhat.com> - Wieland Hoffmann <themineo(a)googlemail.com> - Douglas Schilling Landgraf <dougsland(a)redhat.com> - Tom Vijlbrief <tom.vijlbrief(a)xs4all.nl> - Shradha Shah <sshah(a)solarflare.com> - Steve Hodgson <shodgson(a)solarflare.com> - Xu He Jie <xuhj(a)linux.vnet.ibm.com> - Lei Li <lilei(a)linux.vnet.ibm.com> - Matthias Witte <witte(a)netzquadrat.de> - Tang Chen <tangchen(a)cn.fujitsu.com> - Dan Horák <dan(a)danny.cz> - Sage Weil <sage(a)newdream.net> - David L Stevens <dlstevens(a)us.ibm.com> - Tyler Coumbes <coumbes(a)gmail.com> - Royce Lv <lvroyce(a)linux.vnet.ibm.com> - Patrice LACHANCE <patlachance(a)gmail.com> - Eli Qiao <taget(a)linux.vnet.ibm.com> - Michael Wood <esiotrot(a)gmail.com> - Bharata B Rao <bharata(a)linux.vnet.ibm.com> - Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> - Chang Liu <lingjiao.lc(a)taobao.com> - Lorin Hochstein <lorin(a)isi.edu> - Christian Franke <nobody(a)nowhere.ws> - Prerna Saxena <prerna(a)linux.vnet.ibm.com> - Michael Ellerman <michael(a)ellerman.id.au> - Rommer <rommer(a)active.by> - Yuri Chornoivan <yurchor(a)ukr.net> - Deepak C Shetty <deepakcs(a)linux.vnet.ibm.com> - Laszlo Ersek <lersek(a)redhat.com> - Zeeshan Ali (Khattak) <zeeshanak(a)gnome.org> - Marcelo Cerri <mhcerri(a)linux.vnet.ibm.com> - Hendrik Schwartke <hendrik(a)os-t.de> - Ansis Atteka <aatteka(a)nicira.com> - Dan Wendlandt <dan(a)nicira.com> - Kyle Mestery <kmestery(a)cisco.com> - Lincoln Myers <lincoln_myers(a)yahoo.com> - Peter Robinson <pbrobinson(a)gmail.com> - Benjamin Cama <benoar(a)dolka.fr> - Duncan Rance <libvirt(a)dunquino.com> - Peng Zhou <ailvpeng25(a)gmail.com> - Li Zhang <zhlcindy(a)linux.vnet.ibm.com> - Stef Walter <stefw(a)gnome.org> - Christian Benvenuti <benve(a)cisco.com> - Ilja Livenson <ilja.livenson(a)gmail.com> - Stefan Bader <stefan.bader(a)canonical.com> - MATSUDA Daiki <matsudadik(a)intellilink.co.jp> - Jan Kiszka <jan.kiszka(a)siemens.com> - Ryan Woodsmall <rwoodsmall(a)gmail.com> - Wido den Hollander <wido(a)widodh.nl> - Eugen Feller <eugen.feller(a)inria.fr> - Dmitry Guryanov <dguryanov(a)parallels.com> - William Jon McCann <william.jon.mccann(a)gmail.com> - David Weber <wb(a)munzinger.de> - Marti Raudsepp <marti(a)juffo.org> - Radu Caragea <dmns_serp(a)yahoo.com> - Beat Jörg <Beat.Joerg(a)ssatr.ch> - Gao feng <gaofeng(a)cn.fujitsu.com> - Dipankar Sarma <dipankar(a)in.ibm.com> - Gerd Hoffmann <kraxel(a)redhat.com> - Viktor Mihajlovski <mihajlov(a)linux.vnet.ibm.com> - Thang Pham <thang.pham(a)us.ibm.com> - Eiichi Tsukata <eiichi.tsukata.xh(a)hitachi.com> - Sascha Peilicke <saschpe(a)suse.de> - Chuck Short <chuck.short(a)canonical.com> - Sebastian Wiedenroth <wiedi(a)frubar.net> - Ata E Husain Bohra <ata.husain(a)hotmail.com> - Ján Tomko <jtomko(a)redhat.com> - Richa Marwaha <rmarwah(a)linux.vnet.ibm.com> - Peter Feiner <peter(a)gridcentric.ca> - Frido Roose <frido.roose(a)gmail.com> - Asad Saeed <asad.saeed(a)acidseed.com> - Sukadev Bhattiprolu <sukadev(a)linux.vnet.ibm.com> - Thomas Woerner <twoerner(a)redhat.com> - J.B. Joret <jb(a)linux.vnet.ibm.com> - Stefan Hajnoczi <stefanha(a)linux.vnet.ibm.com> - Gene Czarcinski <gene(a)czarc.net> - Nishank Trivedi <nistrive(a)cisco.com> - Jasper Lievisse Adriaanse <jasper(a)humppa.nl> - Paul Eggert <eggert(a)cs.ucla.edu> - Dwight Engen <dwight.engen(a)oracle.com> - liguang <lig.fnst(a)cn.fujitsu.com> - Chuck Short <zulcss(a)gmail.com> - Alexander Larsson <alexl(a)redhat.com> - - [....send patches to get your name here....] - -The libvirt Logo was designed by Diana Fong - --- End -;; Local Variables: -;; coding: utf-8 -;; End: diff --git a/AUTHORS.in b/AUTHORS.in new file mode 100644 index 0000000..01339f2 --- /dev/null +++ b/AUTHORS.in @@ -0,0 +1,90 @@ + libvirt Authors + =============== + +The libvirt project was initiated by: + +Daniel Veillard <veillard(a)redhat.com> or <daniel(a)veillard.com> + +The primary maintainers and people with commit access rights: + +Alex Jia <ajia(a)redhat.com> +Martin Kletzander <mkletzan(a)redhat.com> +Alex Jia <ajia(a)redhat.com> +Anthony Liguori <aliguori(a)us.ibm.com> +Chris Lalancette <clalance(a)redhat.com> +Christophe Fergeau <cfergeau(a)redhat.com> +Cole Robinson <crobinso(a)redhat.com> +Daniel Berrange <berrange(a)redhat.com> +Daniel Veillard <veillard(a)redhat.com> +Dave Allan <dallan(a)redhat.com> +Eric Blake <eblake(a)redhat.com> +Guido Günther <agx(a)sigxcpu.org> +Jim Fehlig <jfehlig(a)suse.com> +Jim Meyering <meyering(a)redhat.com> +Jiří Denemark <jdenemar(a)redhat.com> +John Levon <john.levon(a)sun.com> +Justin Clift <jclift(a)redhat.com> +Laine Stump <laine(a)redhat.com> +Mark McLoughlin <markmc(a)redhat.com> +Martin Kletzander <mkletzan(a)redhat.com> +Matthias Bolte <matthias.bolte(a)googlemail.com> +Michal Prívozník <mprivozn(a)redhat.com> +Osier Yang <jyang(a)redhat.com> +Peter Krempa <pkrempa(a)redhat.com> +Richard W.M. Jones <rjones(a)redhat.com> +Stefan Berger <stefanb(a)us.ibm.com> +Wen Congyang <wency(a)cn.fujitsu.com> + +Previous maintainers: + +Atsushi SAKAI <sakaia(a)jp.fujitsu.com> +Dan Smith <danms(a)us.ibm.com> +Dave Leskovec <dlesko(a)linux.vnet.ibm.com> +Karel Zak <kzak(a)redhat.com> + +Patches have also been contributed by: + +Abel Míguez Rodríguez <amiguezr(a)pdi.ucm.es> +Amit Shah <amit.shah(a)redhat.com> +Andrew Puch <apuch(a)redhat.com> +Anton Protopopov <aspsk2(a)gmail.com> +Ben Guthro <ben.guthro(a)gmail.com> +Christian Ehrhardt <ehrhardt(a)linux.vnet.ibm.com> +Daniel Hokka Zakrisson <daniel(a)hozac.com> +Dan Wendlandt <dan(a)nicira.com> +David Lively <dlively(a)virtualiron.com> +David Lutterkort <dlutter(a)redhat.com> +Evgeniy Sokolov <evg(a)openvz.org> +Hugh Brock <hbrock(a)redhat.com> +Itamar Heim <iheim(a)redhat.com> +James Morris <jmorris(a)namei.org> +Javier Fontan <jfontan(a)gmail.com> +Jeremy Katz <katzj(a)redhat.com> +Kaitlin Rupert <kaitlin(a)linux.vnet.ibm.com> +Kazuki Mizushima <mizushima.kazuk(a)jp.fujitsu.com> +Mads Chr. Olesen <shiyee(a)shiyee.dk> +Mark Johnson <johnson.nh(a)gmail.com> +Markus Armbruster <armbru(a)redhat.com> +Masayuki Sunou <fj1826dm(a)aa.jp.fujitsu.com> +Matthias Witte <witte(a)netzquadrat.de> +Michel Ponceau <michel.ponceau(a)bull.net> +Nobuhiro Itou <fj0873gn(a)aa.jp.fujitsu.com> +Pete Vetere <pvetere(a)redhat.com> +Philippe Berthault <philippe.berthault(a)Bull.net> +Saori Fukuta <fukuta.saori(a)jp.fujitsu.com> +Shigeki Sakamoto <fj0588di(a)aa.jp.fujitsu.com> +Shuveb Hussain <shuveb(a)binarykarma.com> +Stefan de Konink <dekonink(a)kinkrsoftware.nl> +Takahashi Tomohiro <takatom(a)jp.fujitsu.com> +Tatsuro Enokura <fj7716hz(a)aa.jp.fujitsu.com> + +#authorslist# + +[....send patches to get your name here....] + +The libvirt logo was designed by Diana Fong + +-- End +;; Local Variables: +;; coding: utf-8 +;; End: diff --git a/Makefile.am b/Makefile.am index 333e300..5ab75b4 100644 --- a/Makefile.am +++ b/Makefile.am @@ -28,6 +28,7 @@ EXTRA_DIST = \ cfg.mk \ examples/domain-events/events-python \ run.in \ + AUTHORS.in \ $(XML_EXAMPLES) pkgconfigdir = $(libdir)/pkgconfig @@ -78,7 +79,7 @@ MAINTAINERCLEANFILES = .git-module-status # disable this check distuninstallcheck: -dist-hook: gen-ChangeLog +dist-hook: gen-ChangeLog gen-AUTHORS # Generate the ChangeLog file (with all entries since the switch to git) # and insert it into the directory we're about to use to create a tarball. @@ -91,3 +92,12 @@ gen-ChangeLog: rm -f $(distdir)/ChangeLog; \ mv $(distdir)/cl-t $(distdir)/ChangeLog; \ fi + +.PHONY: gen-AUTHORS +gen-AUTHORS: + if test -d .git; then \ + out="$$(git log --pretty=format:'%aN <%aE>' | sort -u)" && \ + cat $(srcdir)/AUTHORS.in | perl -p -e "s/#authorslist#/$$out/" > \ + $(distdir)/AUTHORS-tmp && \ + mv -f $(distdir)/AUTHORS-tmp $(distdir)/AUTHORS ; \ + fi diff --git a/bootstrap.conf b/bootstrap.conf index f8b7c4d..5d391fd 100644 --- a/bootstrap.conf +++ b/bootstrap.conf @@ -223,8 +223,8 @@ if `(${PYTHON_CONFIG-python-config} --version; PYTHON_CONFIG=true fi -# Automake requires that ChangeLog exist. -touch ChangeLog || exit 1 +# Automake requires that ChangeLog and AUTHORS exist. +touch AUTHORS ChangeLog || exit 1 # Override bootstrap's list - we don't use mdate-sh or texinfo.tex. gnulib_extra_files=" diff --git a/cfg.mk b/cfg.mk index e1fbf4f..eed7fd8 100644 --- a/cfg.mk +++ b/cfg.mk @@ -43,7 +43,6 @@ _test_script_regex = \<$init\|test-lib$\.sh\> # Tests not to run as part of "make distcheck". local-checks-to-skip = \ changelog-check \ - check-AUTHORS \ makefile-check \ makefile_path_separator_check \ patch-check \ @@ -711,20 +710,6 @@ _autogen: $(srcdir)/autogen.sh ./config.status -# Give credit where due: -# Ensure that each commit author email address (possibly mapped via -# git log's .mailmap) appears in our AUTHORS file. -sc_check_author_list: - @fail=0; \ - for i in $$(git log --pretty=format:%aE%n|sort -u|grep -v '^$$'); do \ - sanitized=$$(echo "$$i"|LC_ALL=C sed 's/$[^a-zA-Z0-9_@-]$/\\\1/g'); \ - grep -iq "<$$sanitized>" $(srcdir)/AUTHORS \ - || { printf '%s\n' "$$i" >&2; fail=1; }; \ - done; \ - test $$fail = 1 \ - && echo '$(ME): committer(s) not listed in AUTHORS' >&2; \ - test $$fail = 0 - # regenerate HACKING as part of the syntax-check syntax-check: $(top_srcdir)/HACKING -- 1.7.11.7

3 6

[libvirt] [PATCH] util: fix index when building lock owners array
by Laine Stump 14 Nov '12

14 Nov '12

The "restart" function for locks allocates a new array according to and pre-sets its length, then reads the owner pids from a JSON document in a loop. Rather than adding each owner at a different index, though, it repeatedly overwrites the last element of the array with all the owners. --- src/util/virlockspace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/util/virlockspace.c b/src/util/virlockspace.c index 7e8c0a7..99b6182 100644 --- a/src/util/virlockspace.c +++ b/src/util/virlockspace.c @@ -435,7 +435,7 @@ virLockSpacePtr virLockSpaceNewPostExecRestart(virJSONValuePtr object) goto error; } - res->owners[res->nOwners-1] = (pid_t)owner; + res->owners[j] = (pid_t)owner; } if (virHashAddEntry(lockspace->resources, res->name, res) < 0) { -- 1.7.11.7

2 2