- Devel - libvirt List Archives

[libvirt] [PATCH] Allow RO connections to interface udev backend
by Doug Goldstein 28 Jun '13

28 Jun '13

The udev based interface backend did not allow querying data over a read-only connection which is different than how the netcf backend operates. This brings the behavior inline with the default, netcf backend. --- src/interface/interface_backend_udev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/interface/interface_backend_udev.c b/src/interface/interface_backend_udev.c index 68e1e2f..95034bf 100644 --- a/src/interface/interface_backend_udev.c +++ b/src/interface/interface_backend_udev.c @@ -139,7 +139,7 @@ udevInterfaceOpen(virConnectPtr conn, { struct udev_iface_driver *driverState = NULL; - virCheckFlags(0, VIR_DRV_OPEN_ERROR); + virCheckFlags(VIR_CONNECT_RO, VIR_DRV_OPEN_ERROR); if (VIR_ALLOC(driverState) < 0) { virReportOOMError(); -- 1.8.1.5

3 3

[libvirt] [PATCHv2 0/2] Swap order of AddImplicitControllers and DomainDefPostParse
by Viktor Mihajlovski 28 Jun '13

28 Jun '13

Implicit controllers may be dependent on device definitions altered in a post-parse callback. E.g., if a console device is defined without the target type, the type will be set in QEMU's callback. In the case of s390, this is virtio, which requires an implicit virtio-serial controller. By moving the implicit controller definition after the post-parse procssing this can be fixed. As Martin pointed out, implicit controllers should not need post-parsing, so the rearranging should not hurt. Probably this is only affecting the S390 virtio console anyway. V2 Changes: - Promoted from RFC to Patch Series - Added an qemuxml2xml testcase highlighting the issue: applying the first patch only will fail make check as the implicit controller is missing. Viktor Mihajlovski (2): S390: Testcase for console default target type (virtio) conf: Swap order of AddImplicitControllers and DomainDefPostParse src/conf/domain_conf.c | 8 +++---- .../qemuxml2argv-s390-defaultconsole.xml | 20 ++++++++++++++++ .../qemuxml2xmlout-balloon-device-auto.xml | 2 +- .../qemuxml2xmlout-channel-virtio-auto.xml | 2 +- .../qemuxml2xmlout-console-virtio.xml | 2 +- .../qemuxml2xmlout-disk-scsi-device-auto.xml | 2 +- .../qemuxml2xmlout-s390-defaultconsole.xml | 24 ++++++++++++++++++++ tests/qemuxml2xmltest.c | 2 ++ 8 files changed, 54 insertions(+), 8 deletions(-) create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-s390-defaultconsole.xml create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-s390-defaultconsole.xml -- 1.7.9.5

4 6

[libvirt] [PATCH] build: Fix VPATH build for access/*
by Viktor Mihajlovski 28 Jun '13

28 Jun '13

VPATH build failed for the generated access driver files. Signed-off-by: Viktor Mihajlovski <mihajlov(a)linux.vnet.ibm.com> --- src/Makefile.am | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/src/Makefile.am b/src/Makefile.am index e6b1927..4cf999d 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -808,9 +808,12 @@ SECURITY_DRIVER_APPARMOR_SOURCES = \ security/security_apparmor.h security/security_apparmor.c ACCESS_DRIVER_GENERATED = \ - access/viraccessapicheck.h access/viraccessapicheck.c \ - access/viraccessapicheckqemu.h access/viraccessapicheckqemu.c \ - access/viraccessapichecklxc.h access/viraccessapichecklxc.c + $(srcdir)/access/viraccessapicheck.h \ + $(srcdir)/access/viraccessapicheck.c \ + $(srcdir)/access/viraccessapicheckqemu.h \ + $(srcdir)/access/viraccessapicheckqemu.c \ + $(srcdir)/access/viraccessapichecklxc.h \ + $(srcdir)/access/viraccessapichecklxc.c ACCESS_DRIVER_SYMFILES = \ libvirt_access.syms \ @@ -828,7 +831,7 @@ ACCESS_DRIVER_POLKIT_SOURCES = \ access/viraccessdriverpolkit.h access/viraccessdriverpolkit.c ACCESS_DRIVER_POLKIT_POLICY = \ - access/org.libvirt.api.policy + $(srcdir)/access/org.libvirt.api.policy NODE_DEVICE_DRIVER_SOURCES = \ @@ -1488,29 +1491,29 @@ libvirt_access_lxc.syms: $(srcdir)/rpc/gendispatch.pl \ $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclsym \ lxc LXC $(LXC_PROTOCOL) > $@ -access/viraccessapicheck.h: $(srcdir)/rpc/gendispatch.pl \ +$(srcdir)/access/viraccessapicheck.h: $(srcdir)/rpc/gendispatch.pl \ $(REMOTE_PROTOCOL) Makefile.am $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclheader \ remote REMOTE $(REMOTE_PROTOCOL) > $@ -access/viraccessapicheck.c: $(srcdir)/rpc/gendispatch.pl \ +$(srcdir)/access/viraccessapicheck.c: $(srcdir)/rpc/gendispatch.pl \ $(REMOTE_PROTOCOL) Makefile.am $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclbody \ remote REMOTE $(REMOTE_PROTOCOL) access/viraccessapicheck.h > $@ -access/viraccessapicheckqemu.h: $(srcdir)/rpc/gendispatch.pl \ +$(srcdir)/access/viraccessapicheckqemu.h: $(srcdir)/rpc/gendispatch.pl \ $(QEMU_PROTOCOL) Makefile.am $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclheader \ qemu QEMU $(QEMU_PROTOCOL) > $@ -access/viraccessapicheckqemu.c: $(srcdir)/rpc/gendispatch.pl \ +$(srcdir)/access/viraccessapicheckqemu.c: $(srcdir)/rpc/gendispatch.pl \ $(QEMU_PROTOCOL) Makefile.am $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclbody \ qemu QEMU $(QEMU_PROTOCOL) access/viraccessapicheckqemu.h > $@ -access/viraccessapichecklxc.h: $(srcdir)/rpc/gendispatch.pl \ +$(srcdir)/access/viraccessapichecklxc.h: $(srcdir)/rpc/gendispatch.pl \ $(LXC_PROTOCOL) Makefile.am $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclheader \ lxc LXC $(LXC_PROTOCOL) > $@ -access/viraccessapichecklxc.c: $(srcdir)/rpc/gendispatch.pl \ +$(srcdir)/access/viraccessapichecklxc.c: $(srcdir)/rpc/gendispatch.pl \ $(LXC_PROTOCOL) Makefile.am $(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=aclbody \ lxc LXC $(LXC_PROTOCOL) access/viraccessapichecklxc.h > $@ -- 1.7.9.5

2 2

[libvirt] [PATCH]Fix vPort Manage of FC vHBA creation
by Dennis Chen 28 Jun '13

28 Jun '13

When create a virtual FC HBA with virsh/libvirt API, an error message will be returned:"error: Node device not found", also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn for the new created device. Signed-off-by:xschen@tnsoft.com.cn --- src/util/virutil.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/util/virutil.c b/src/util/virutil.c index 6fa0212e..569d035 100644 --- a/src/util/virutil.c +++ b/src/util/virutil.c @@ -1792,8 +1792,8 @@ virManageVport(const int parent_host, if (virAsprintf(&vport_name, "%s:%s", - wwnn, - wwpn) < 0) { + wwpn, + wwnn) < 0) { virReportOOMError(); goto cleanup; }

3 5

[libvirt] Bug 979260 - cpu hot-add doesn't work with upstream libvirt 1.0.6 + qemu 1.5.50
by chandrashekar shastri 28 Jun '13

28 Jun '13

Hi All, I have filed the following bug for CPU hot-add issue: Bug 979260 - cpu hot-add doesn't work with upstream libvirt 1.0.6 + qemu 1.5.50 Thanks, Chandrashekar

2 2

[libvirt] [PATCH v2] Make logical pools independent on target path
by Martin Kletzander 28 Jun '13

28 Jun '13

When using logical pools, we had to trust the target->path provided. This parameter, however, can be completely ommited and we can get the correct path using 'lvdisplay' command. In order not to omit the target.path completely, we rather default it to '/dev/<source.name>' which is used to check the pool anyway. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- Notes: v2: - don't drop target.path, but fix it instead to '/dev/<source.name>' Thanks to the change from v1, we can now safely drop all the hunks from logical backend and even the dependency on lvdisplay command. There might be some systems where the path is different and the part of this patch using lvdisplay command would make most of them work. However, checkPool() still depends on '/dev/<source.name>' and I haven't found any other way how to fix that, so feel free to ACK just the {conf,docs,tests}/ part in case you think that we shouldn't try to support anything else than '/dev/<source.name>'. configure.ac | 4 + docs/schemas/storagepool.rng | 13 ++- src/conf/storage_conf.c | 19 +++-- src/storage/storage_backend_logical.c | 95 +++++++++++++--------- src/storage/storage_driver.c | 2 +- tests/storagepoolxml2xmlin/pool-logical-create.xml | 2 +- tests/storagepoolxml2xmlin/pool-logical-nopath.xml | 18 ++++ .../storagepoolxml2xmlout/pool-logical-nopath.xml | 19 +++++ tests/storagepoolxml2xmltest.c | 1 + 9 files changed, 125 insertions(+), 48 deletions(-) create mode 100644 tests/storagepoolxml2xmlin/pool-logical-nopath.xml create mode 100644 tests/storagepoolxml2xmlout/pool-logical-nopath.xml diff --git a/configure.ac b/configure.ac index ef246a6..221b6cb 100644 --- a/configure.ac +++ b/configure.ac @@ -1601,6 +1601,7 @@ if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then AC_PATH_PROG([PVS], [pvs], [], [$PATH:/sbin:/usr/sbin]) AC_PATH_PROG([VGS], [vgs], [], [$PATH:/sbin:/usr/sbin]) AC_PATH_PROG([LVS], [lvs], [], [$PATH:/sbin:/usr/sbin]) + AC_PATH_PROG([LVDISPLAY], [lvdisplay], [], [$PATH:/sbin:/usr/sbin]) if test "$with_storage_lvm" = "yes" ; then if test -z "$PVCREATE" ; then AC_MSG_ERROR([We need pvcreate for LVM storage driver]) ; fi @@ -1615,6 +1616,7 @@ if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then if test -z "$PVS" ; then AC_MSG_ERROR([We need pvs for LVM storage driver]) ; fi if test -z "$VGS" ; then AC_MSG_ERROR([We need vgs for LVM storage driver]) ; fi if test -z "$LVS" ; then AC_MSG_ERROR([We need lvs for LVM storage driver]) ; fi + if test -z "$LVDISPLAY" ; then AC_MSG_ERROR([We need lvdisplay for LVM storage driver]) ; fi else if test -z "$PVCREATE" ; then with_storage_lvm=no ; fi if test -z "$VGCREATE" ; then with_storage_lvm=no ; fi @@ -1628,6 +1630,7 @@ if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then if test -z "$PVS" ; then with_storage_lvm=no ; fi if test -z "$VGS" ; then with_storage_lvm=no ; fi if test -z "$LVS" ; then with_storage_lvm=no ; fi + if test -z "$LVDISPLAY" ; then with_storage_lvm=no ; fi if test "$with_storage_lvm" = "check" ; then with_storage_lvm=yes ; fi fi @@ -1646,6 +1649,7 @@ if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then AC_DEFINE_UNQUOTED([PVS],["$PVS"],[Location of pvs program]) AC_DEFINE_UNQUOTED([VGS],["$VGS"],[Location of vgs program]) AC_DEFINE_UNQUOTED([LVS],["$LVS"],[Location of lvs program]) + AC_DEFINE_UNQUOTED([LVDISPLAY],["$LVDISPLAY"],[Location of lvdisplay program]) fi fi AM_CONDITIONAL([WITH_STORAGE_LVM], [test "$with_storage_lvm" = "yes"]) diff --git a/docs/schemas/storagepool.rng b/docs/schemas/storagepool.rng index 3c2158a..1b3f4bc 100644 --- a/docs/schemas/storagepool.rng +++ b/docs/schemas/storagepool.rng @@ -62,7 +62,7 @@ <ref name='commonmetadata'/> <ref name='sizing'/> <ref name='sourcelogical'/> - <ref name='target'/> + <ref name='targetlogical'/> </define> <define name='pooldisk'> @@ -207,6 +207,17 @@ </element> </define> + <define name='targetlogical'> + <element name='target'> + <optional> + <element name='path'> + <ref name='absFilePath'/> + </element> + </optional> + <ref name='permissions'/> + </element> + </define> + <define name='sourceinfohost'> <oneOrMore> <element name='host'> diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c index 288e265..7ffe58c 100644 --- a/src/conf/storage_conf.c +++ b/src/conf/storage_conf.c @@ -1,7 +1,7 @@ /* * storage_conf.c: config handling for storage driver * - * Copyright (C) 2006-2012 Red Hat, Inc. + * Copyright (C) 2006-2013 Red Hat, Inc. * Copyright (C) 2006-2008 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -959,15 +959,22 @@ virStoragePoolDefParseXML(xmlXPathContextPtr ctxt) /* When we are working with a virtual disk we can skip the target * path and permissions */ if (!(options->flags & VIR_STORAGE_POOL_SOURCE_NETWORK)) { - if (!(target_path = virXPathString("string(./target/path)", ctxt))) { - virReportError(VIR_ERR_XML_ERROR, "%s", - _("missing storage pool target path")); - goto error; + if (ret->type == VIR_STORAGE_POOL_LOGICAL) { + if (virAsprintf(&target_path, "/dev/%s", ret->source.name) < 0) { + virReportOOMError(); + goto error; + } + } else { + target_path = virXPathString("string(./target/path)", ctxt); + if (!target_path) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("missing storage pool target path")); + goto error; + } } ret->target.path = virFileSanitizePath(target_path); if (!ret->target.path) goto error; - if (virStorageDefParsePerms(ctxt, &ret->target.perms, "./target/permissions", DEFAULT_POOL_PERM_MODE) < 0) diff --git a/src/storage/storage_backend_logical.c b/src/storage/storage_backend_logical.c index 944aa0e..471f8d9 100644 --- a/src/storage/storage_backend_logical.c +++ b/src/storage/storage_backend_logical.c @@ -45,6 +45,37 @@ #define PV_BLANK_SECTOR_SIZE 512 +static char * +virStorageBackendGetVolPath(const char *poolname, const char *volname) +{ + char *start = NULL; + char *lvpath = NULL; + char *output = NULL; + + virCommandPtr cmd = virCommandNewArgList(LVDISPLAY, + "--columns", + "--options", "lv_path", + "--noheadings", + "--unbuffered", + NULL); + + virCommandAddArgFormat(cmd, "%s/%s", poolname, volname); + virCommandSetOutputBuffer(cmd, &output); + + if (virCommandRun(cmd, NULL) < 0 || + !(start = strchr(output, '/'))) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Cannot get LV path")); + goto cleanup; + } + + ignore_value(VIR_STRDUP(lvpath, start)); + + cleanup: + VIR_FREE(output); + virCommandFree(cmd); + return lvpath; +} + static int virStorageBackendLogicalSetActive(virStoragePoolObjPtr pool, int on) @@ -116,11 +147,8 @@ virStorageBackendLogicalMakeVol(virStoragePoolObjPtr pool, } if (vol->target.path == NULL) { - if (virAsprintf(&vol->target.path, "%s/%s", - pool->def->target.path, vol->name) < 0) { - virReportOOMError(); + if (VIR_STRDUP(vol->target.path, groups[10]) < 0) goto cleanup; - } } /* Skips the backingStore of lv created with "--virtualsize", @@ -130,12 +158,11 @@ virStorageBackendLogicalMakeVol(virStoragePoolObjPtr pool, * (lvs outputs "[$lvname_vorigin] for field "origin" if the * lv is created with "--virtualsize"). */ - if (groups[1] && !STREQ(groups[1], "") && (groups[1][0] != '[')) { - if (virAsprintf(&vol->backingStore.path, "%s/%s", - pool->def->target.path, groups[1]) < 0) { - virReportOOMError(); + if (groups[1] && STRNEQ(groups[1], "") && (groups[1][0] != '[')) { + vol->backingStore.path = virStorageBackendGetVolPath(pool->def->source.name, + groups[1]); + if (!vol->backingStore.path) goto cleanup; - } vol->backingStore.format = VIR_STORAGE_POOL_LOGICAL_LVM2; } @@ -277,21 +304,21 @@ virStorageBackendLogicalFindLVs(virStoragePoolObjPtr pool, virStorageVolDefPtr vol) { /* - * # lvs --separator , --noheadings --units b --unbuffered --nosuffix --options \ - * "lv_name,origin,uuid,devices,seg_size,vg_extent_size,size,lv_attr" VGNAME + * # lvs --separator '#' --noheadings --units b --unbuffered --nosuffix --options \ + * "lv_name,origin,uuid,devices,seg_size,vg_extent_size,size,lv_attr,lv_path" VGNAME * - * RootLV,,06UgP5-2rhb-w3Bo-3mdR-WeoL-pytO-SAa2ky,/dev/hda2(0),5234491392,33554432,5234491392,-wi-ao - * SwapLV,,oHviCK-8Ik0-paqS-V20c-nkhY-Bm1e-zgzU0M,/dev/hda2(156),1040187392,33554432,1040187392,-wi-ao - * Test2,,3pg3he-mQsA-5Sui-h0i6-HNmc-Cz7W-QSndcR,/dev/hda2(219),1073741824,33554432,1073741824,owi-a- - * Test3,,UB5hFw-kmlm-LSoX-EI1t-ioVd-h7GL-M0W8Ht,/dev/hda2(251),2181038080,33554432,2181038080,-wi-a- - * Test3,Test2,UB5hFw-kmlm-LSoX-EI1t-ioVd-h7GL-M0W8Ht,/dev/hda2(187),1040187392,33554432,1040187392,swi-a- + * RootLV##06UgP5-2rhb-w3Bo-3mdR-WeoL-pytO-SAa2ky#/dev/hda2(0)#5234491392#33554432#5234491392#-wi-ao#/dev/VGNAME/RootLV + * SwapLV##oHviCK-8Ik0-paqS-V20c-nkhY-Bm1e-zgzU0M#/dev/hda2(156)#1040187392#33554432#1040187392#-wi-ao#/dev/VGNAME/SwapLV + * Test2##3pg3he-mQsA-5Sui-h0i6-HNmc-Cz7W-QSndcR#/dev/hda2(219)#1073741824#33554432#1073741824#owi-a-#/dev/VGNAME/Test2 + * Test3##UB5hFw-kmlm-LSoX-EI1t-ioVd-h7GL-M0W8Ht#/dev/hda2(251)#2181038080#33554432#2181038080#-wi-a-#/dev/VGNAME/Test3 + * Test3#Test2#UB5hFw-kmlm-LSoX-EI1t-ioVd-h7GL-M0W8Ht#/dev/hda2(187)#1040187392#33554432#1040187392#swi-a-#/dev/VGNAME/Test3 * * Pull out name, origin, & uuid, device, device extent start #, * segment size, extent size, size, attrs * * NB can be multiple rows per volume if they have many extents * - * NB lvs from some distros (e.g. SLES10 SP2) outputs trailing "," on each line + * NB lvs from some distros (e.g. SLES10 SP2) outputs trailing separator on each line * * NB Encrypted logical volumes can print ':' in their name, so it is * not a suitable separator (rhbz 470693). @@ -299,7 +326,7 @@ virStorageBackendLogicalFindLVs(virStoragePoolObjPtr pool, * striped, so "," is not a suitable separator either (rhbz 727474). */ const char *regexes[] = { - "^\\s*(\\S+)#(\\S*)#(\\S+)#(\\S+)#(\\S+)#([0-9]+)#(\\S+)#([0-9]+)#([0-9]+)#(\\S+)#?\\s*$" + "^\\s*(\\S+)#(\\S*)#(\\S+)#(\\S+)#(\\S+)#([0-9]+)#(\\S+)#([0-9]+)#([0-9]+)#(\\S+)#(\\S+)#?\\s*$" }; int vars[] = { 10 @@ -314,7 +341,7 @@ virStorageBackendLogicalFindLVs(virStoragePoolObjPtr pool, "--unbuffered", "--nosuffix", "--options", - "lv_name,origin,uuid,devices,segtype,stripes,seg_size,vg_extent_size,size,lv_attr", + "lv_name,origin,uuid,devices,segtype,stripes,seg_size,vg_extent_size,size,lv_attr,lv_path", pool->def->source.name, NULL); if (virStorageBackendRunProgRegex(pool, @@ -470,18 +497,7 @@ virStorageBackendLogicalCheckPool(virConnectPtr conn ATTRIBUTE_UNUSED, virStoragePoolObjPtr pool, bool *isActive) { - char *path; - - *isActive = false; - if (virAsprintf(&path, "/dev/%s", pool->def->source.name) < 0) { - virReportOOMError(); - return -1; - } - - if (access(path, F_OK) == 0) - *isActive = true; - - VIR_FREE(path); + *isActive = (access(pool->def->target.path, F_OK) == 0); return 0; } @@ -702,6 +718,7 @@ virStorageBackendLogicalCreateVol(virConnectPtr conn, int fd = -1; virCommandPtr cmd = NULL; virErrorPtr err; + bool created = false; if (vol->target.encryption != NULL) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, @@ -717,13 +734,6 @@ virStorageBackendLogicalCreateVol(virConnectPtr conn, VIR_FREE(vol->target.path); } - if (virAsprintf(&vol->target.path, "%s/%s", - pool->def->target.path, - vol->name) == -1) { - virReportOOMError(); - return -1; - } - cmd = virCommandNewArgList(LVCREATE, "--name", vol->name, NULL); @@ -742,9 +752,15 @@ virStorageBackendLogicalCreateVol(virConnectPtr conn, if (virCommandRun(cmd, NULL) < 0) goto error; + created = true; virCommandFree(cmd); cmd = NULL; + vol->target.path = virStorageBackendGetVolPath(pool->def->source.name, + vol->name); + if (!vol->target.path) + goto error; + if ((fd = virStorageBackendVolOpen(vol->target.path)) < 0) goto error; @@ -784,7 +800,8 @@ virStorageBackendLogicalCreateVol(virConnectPtr conn, error: err = virSaveLastError(); VIR_FORCE_CLOSE(fd); - virStorageBackendLogicalDeleteVol(conn, pool, vol, 0); + if (created) + virStorageBackendLogicalDeleteVol(conn, pool, vol, 0); virCommandFree(cmd); virSetError(err); virFreeError(err); diff --git a/src/storage/storage_driver.c b/src/storage/storage_driver.c index cc8eaa9..891097f 100644 --- a/src/storage/storage_driver.c +++ b/src/storage/storage_driver.c @@ -1,7 +1,7 @@ /* * storage_driver.c: core driver for storage APIs * - * Copyright (C) 2006-2012 Red Hat, Inc. + * Copyright (C) 2006-2013 Red Hat, Inc. * Copyright (C) 2006-2008 Daniel P. Berrange * * This library is free software; you can redistribute it and/or diff --git a/tests/storagepoolxml2xmlin/pool-logical-create.xml b/tests/storagepoolxml2xmlin/pool-logical-create.xml index 4c67089..fd551e0 100644 --- a/tests/storagepoolxml2xmlin/pool-logical-create.xml +++ b/tests/storagepoolxml2xmlin/pool-logical-create.xml @@ -10,7 +10,7 @@ <device path="/dev/sdb3"/> </source> <target> - <path>/dev/HostVG</path> + <path>/invalid/nonexistent/path</path> <permissions> <mode>0700</mode> <owner>0</owner> diff --git a/tests/storagepoolxml2xmlin/pool-logical-nopath.xml b/tests/storagepoolxml2xmlin/pool-logical-nopath.xml new file mode 100644 index 0000000..307e2ab --- /dev/null +++ b/tests/storagepoolxml2xmlin/pool-logical-nopath.xml @@ -0,0 +1,18 @@ +<pool type='logical'> + <name>HostVG</name> + <uuid>1c13165a-d0f4-3aee-b447-30fb38789091</uuid> + <capacity>99891544064</capacity> + <allocation>99220455424</allocation> + <available>671088640</available> + <source> + <name>HostVG</name> + <format type='lvm2'/> + </source> + <target> + <permissions> + <mode>0700</mode> + <owner>0</owner> + <group>0</group> + </permissions> + </target> +</pool> diff --git a/tests/storagepoolxml2xmlout/pool-logical-nopath.xml b/tests/storagepoolxml2xmlout/pool-logical-nopath.xml new file mode 100644 index 0000000..07860ef --- /dev/null +++ b/tests/storagepoolxml2xmlout/pool-logical-nopath.xml @@ -0,0 +1,19 @@ +<pool type='logical'> + <name>HostVG</name> + <uuid>1c13165a-d0f4-3aee-b447-30fb38789091</uuid> + <capacity unit='bytes'>0</capacity> + <allocation unit='bytes'>0</allocation> + <available unit='bytes'>0</available> + <source> + <name>HostVG</name> + <format type='lvm2'/> + </source> + <target> + <path>/dev/HostVG</path> + <permissions> + <mode>0700</mode> + <owner>0</owner> + <group>0</group> + </permissions> + </target> +</pool> diff --git a/tests/storagepoolxml2xmltest.c b/tests/storagepoolxml2xmltest.c index 0376e63..3becdcf 100644 --- a/tests/storagepoolxml2xmltest.c +++ b/tests/storagepoolxml2xmltest.c @@ -85,6 +85,7 @@ mymain(void) DO_TEST("pool-dir"); DO_TEST("pool-fs"); DO_TEST("pool-logical"); + DO_TEST("pool-logical-nopath"); DO_TEST("pool-logical-create"); DO_TEST("pool-disk"); DO_TEST("pool-iscsi"); -- 1.8.2.1

1 0

[libvirt] Design of virDomainSnapshotExport/Import
by Xu Wang 28 Jun '13

28 Jun '13

Applications based on libvirt such as OpenStack need some public APIs about export/import of external snapshot during daily backup, snapshot recovery or system migration. virDomainSnapshotDiskExport, virDomainSnapshotVmstateExport and virDomainSnapshotImport are designed to satisfy such requirement. @flags: virDomainSnapshotExportImportFlags include, DATA_FULL: all data snapshot DATA_DELTA: delta data only /** * virDomainSnapshotDiskExport * @domain: the domain object to be exported snapshot * @id: top Overlays which to be exported * @base_id: RootBase of snapshot to be exported * @disk: block device of domain * @export_path: path of snapshots export * @flags: bitwise-OR of virDomainSnapshotExportImportFlags * * Import snapshot disk data to the pointed path. * * If @flags includes DATA_FULL, full backup snapshot will be exported. * * If @flags includes DATA_DELTA, incremental backup snapshot will be * exported. * * DATA_FULL and DATA_DELTA should not appear at the same time * * Returns 0 on success, or -1 on error */ int virDomainSnapshotDiskExport(virDomain *domain, virSnapshotId *id, virSnapshotId *base_id, virDevice *disk, char *export_path, unsigned int flags) Usage: export external snapshot disk file from virtual machine to the target path. /** * virDomainSnapshotVmstateExport * @domain: the domain object to be exported snapshot * @id: top Overlays which to be exported * @export_path: path of snapshots export * @flags: not used yet, so callers should always pass 0 * * Import snapshot vmstate data to the pointed path. * * If @flags includes DATA_FULL, full backup snapshot will be exported. * * If @flags includes DATA_DELTA, incremental backup snapshot will be * exported. * * DATA_FULL and DATA_DELTA should not appear at the same time * * Returns 0 on success, or -1 on error */ int virDomainSnapshotVmstateExport(virDomain *domain, virSnapshotId *id, char *export_path, unsigned int flags) Usage: dump vmstate file of snapshot and copy it to the target path. /** * virDomainSnapshotImport * @domain: the domain object to be exported snapshot * @xmlDesc: string containing an XML description of the domain * @flags: bitwise-OR of virDomainSnapshotExportImportFlags * * Import snapshot data to the pointed path. * * If @flags includes DATA_FULL, full backup snapshot will be exported. * * If @flags includes DATA_DELTA, incremental backup snapshot will be * exported. * * DATA_FULL and DATA_DELTA should not appear at the same time * * Returns 0 on success, or -1 on error */ int virDomainSnapshotImport(virDomain *domain, const char *xmlDesc, unsigned int flags) Usage: import .xml file of external snapshot and use it for recovering a virtual machine. Usecase: If users want to finish daily backup&recovery work by above APIs, the process should be, 1. call virDomainSnapshotDiskExport() to export pointed snapshot disk files to the traget path. ------------------- --------------------- | host A | | host B | | --------------- | | ----------------- | | | dom1 | | snapshot disk files | | backup folder | | | | base.img----------------------------------->base.img | | | | snap1.qcow2-------------------------------->snap1.qcow2 | | | | snap2.qcow2-------------------------------->snap2.qcow2 | | | --------------- | | ----------------- | ------------------- --------------------- virDomainSnapshotDiskSnapshot() 2. call virDomainSnapshotVmstateExport() to export vmstate data file to the target path. --------------- --------------------- | host A | | host B | | ----------- | | ----------------- | | | dom1 | | vmstate data files | | backup folder | | | | dumpxml-------------------------------->vmstate.xml | | | ----------- | | ----------------- | --------------- --------------------- virDomainSnapshotVmstateSnapshot() 3. when some error occured, or guest copy/migration, users copy snapshot disk files from host B to the target host and edit <source file> field of <disk> tag. Then users call virDomainSnapshotImport to recovery domain to the snapshot. a. copy snapshot disk files to the target host: ------------------------------- --------------------- | host A | snapshot | host B | | --------------------------- | disk | ----------------- | | | /var/lib/libvirt/images | | files | | backup folder | | | | base.img<-----------------------------------base.img | | | | snap1.qcow2<--------------------------------snap1.qcow2 | | | | snap2.qcow2<--------------------------------snap2.qcow2 | | | --------------------------- | | ----------------- | ------------------------------- --------------------- snapshot disk files transfer b. import vmstate data to recovery snapshot: --------------------- ------------------- | host B | | host A | | ----------------- | | --------------- | vmstate data | | backup folder | | | | dom1<-------------------------------vmstate.xml | | | | base.img | | | ----------------- | | | snap1.qcow2 | | --------------------- | | snap2.qcow2 | | | --------------- | ------------------- virDomainSnapshotImport()

1 0

[libvirt] [PATCH] util: fix build error on non-Linux systems
by Laine Stump 28 Jun '13

28 Jun '13

Building on FreeBSD had this linker error: /work/a/ports/devel/libvirt/work/libvirt-1.1.0/src/.libs/libvirt.so: undefined reference to `virPCIDeviceAddressParse' This was caused by the new use of virPCIDeviceAddressParse in a portion of virpci.c that wasn't linux-only (in commit 72c029d8). The problem was that virPCIDeviceAddressParse had originally been defined inside #ifdef _linux (because it was only used by another function that was inside the same ifdef). The solution is to move it out to the part of virpci.c that is compiled on all platforms. (Because the portion that was "moved" was 40-50 lines, but only moved up by 15 lines, the diff for the patch is less than non-informative - rather than showing that part that I moved, it shows the bit that was previously before the moved part, and now sits *after* it.) --- Pushed under the build-breaker rule. I actually hadn't noticed that some of the functions in virpci.c were Linux-only. It looks like this was done because those functions use the Linux sysfs to get information about the devices. However, much of the rest of virpci.c does the same thing, so we should probably revisit which of the functions in that file are compiled only on Linux and which are compile for everyone. src/util/virpci.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/src/util/virpci.c b/src/util/virpci.c index 0ed29e7..7d83bdb 100644 --- a/src/util/virpci.c +++ b/src/util/virpci.c @@ -2261,21 +2261,6 @@ int virPCIDeviceIsAssignable(virPCIDevicePtr dev, return 1; } -#ifdef __linux__ - -/* - * returns true if equal - */ -static bool -virPCIDeviceAddressIsEqual(virPCIDeviceAddressPtr bdf1, - virPCIDeviceAddressPtr bdf2) -{ - return ((bdf1->domain == bdf2->domain) && - (bdf1->bus == bdf2->bus) && - (bdf1->slot == bdf2->slot) && - (bdf1->function == bdf2->function)); -} - static int logStrToLong_ui(char const *s, char **end_ptr, @@ -2327,6 +2312,21 @@ out: return ret; } +#ifdef __linux__ + +/* + * returns true if equal + */ +static bool +virPCIDeviceAddressIsEqual(virPCIDeviceAddressPtr bdf1, + virPCIDeviceAddressPtr bdf2) +{ + return ((bdf1->domain == bdf2->domain) && + (bdf1->bus == bdf2->bus) && + (bdf1->slot == bdf2->slot) && + (bdf1->function == bdf2->function)); +} + static int virPCIGetDeviceAddressFromSysfsLink(const char *device_link, virPCIDeviceAddressPtr *bdf) -- 1.7.11.7

1 0

[libvirt] Restore original security labels
by Michal Privoznik 27 Jun '13

27 Jun '13

Dear list, it's been a while since I've tried to get the patches in [1]. However, it turned out that we need completely different approach. Now I'd like to revisit that decision. The problem is: libvirt sets various security labels (DAC, selinux) in order for a file to be readable by a qemu process. However, it doesn't record the original labels, so in process of tearing the domain down, we restore "defaults" (in case of DAC we set root:root instead of john:doe). Moreover, if a file is to be shared among multiple domains we can't restore the label as it would make it inaccessible for other qemu processes. My implementation dealt with this problem using XATTRs: one to store the original label, the other one as a reference counter. For each labeling the counter is increased. For each attempt to restore the label the counter is decreased. The original label is restored iff the counter is zero. However, this approach doesn't work well with two libvirtd instances fighting over a file. But one can argue that this is something for cluster. The question is - do we want to reimplement cluster in libvirt? I think my approach seems like reasonable trade-off. So what's your opinion on this? Michal 1: http://www.redhat.com/archives/libvir-list/2013-March/msg01289.html

2 1

[libvirt] [PATCH] add symbol ")" in virsh nodedev-detach help
by xuzhang 27 Jun '13

27 Jun '13

--- tools/virsh-nodedev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/virsh-nodedev.c b/tools/virsh-nodedev.c index da93b8e..49546a2 100644 --- a/tools/virsh-nodedev.c +++ b/tools/virsh-nodedev.c @@ -605,7 +605,7 @@ static const vshCmdOptDef opts_node_device_detach[] = { }, {.name = "driver", .type = VSH_OT_STRING, - .help = N_("pci device assignment backend driver (e.g. 'vfio' or 'kvm'") + .help = N_("pci device assignment backend driver (e.g. 'vfio' or 'kvm'")) }, {.name = NULL} }; -- 1.7.11.7

2 1