- Devel - libvirt List Archives

[libvirt] [PATCH] docs: Reformat <disk> attribute description in formatdomain
by John Ferlan 22 Aug '13

22 Aug '13

Reformat the description to more cleanly delineate the attributes for a <disk> element. --- Similar to the recently changed <source> attribute. docs/formatdomain.html.in | 121 +++++++++++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 50 deletions(-) diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 0d1a74f..9d12293 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -1562,56 +1562,77 @@ <dl> <dt><code>disk</code></dt> <dd>The <code>disk</code> element is the main container for describing - disks. The <code>type</code> attribute is either "file", - "block", "dir", "network", or "volume" - and refers to the underlying source for the disk. The optional - <code>device</code> attribute indicates how the disk is to be exposed - to the guest OS. Possible values for this attribute are - "floppy", "disk", "cdrom", and "lun", defaulting to - "disk". "lun" (since 0.9.10) is only - valid when type is "block" and the target element's "bus" - attribute is "virtio", and behaves identically to "disk", - except that generic SCSI commands from the guest are accepted - and passed through to the physical device - - also note that device='lun' will only be recognized for - actual raw devices, never for individual partitions or LVM - partitions (in those cases, the kernel will reject the generic - SCSI commands, making it identical to device='disk'). - The optional <code>rawio</code> attribute - (since 0.9.10) indicates whether - the disk is needs rawio capability; valid settings are "yes" - or "no" (default is "no"). If any one disk in a domain has - rawio='yes', rawio capability will be enabled for all disks in - the domain (because, in the case of QEMU, this capability can - only be set on a per-process basis). This attribute is only - valid when device is "lun". NB, <code>rawio</code> intends to - confine the capability per-device, however, current QEMU - implementation gives the domain process broader capability - than that (per-process basis, affects all the domain disks). - To confine the capability as much as possible for QEMU driver - as this stage, <code>sgio</code> is recommended, it's more - secure than <code>rawio</code>. - The optional <code>sgio</code> (since 1.0.2) - attribute indicates whether the kernel will filter unprivileged - SG_IO commands for the disk, valid settings are "filtered" or - "unfiltered". Defaults to "filtered". Similar to <code>rawio</code>, - <code>sgio</code> is only valid for device 'lun'. - The optional <code>snapshot</code> attribute indicates the default - behavior of the disk during disk snapshots: "internal" - requires a file format such as qcow2 that can store both the - snapshot and the data changes since the snapshot; - "external" will separate the snapshot from the live data; and - "no" means the disk will not participate in snapshots. - Read-only disks default to "no", while the default for other - disks depends on the hypervisor's capabilities. Some - hypervisors allow a per-snapshot choice as well, - during <a href="formatsnapshot.html">domain snapshot - creation</a>. Not all snapshot modes are supported; - for example, <code>snapshot='yes'</code> with a transient disk - generally does not make sense. Since 0.0.3; - "device" attribute since 0.1.4; - "network" attribute since 0.8.7; "snapshot" since - 0.9.5</dd> + disks (since 0.0.3). + <dl> + <dt><code>type</code> attribute + since 0.0.3</dt> + <dd> + Valid values are "file", "block", + "dir" (since 0.7.5), + "network" (since 0.8.7), or + "volume" (since 1.0.5) + and refer to the underlying source for the disk. + </dd> + <dt><code>device</code> attribute + since 0.1.4</dt> + <dd> + Indicates how the disk is to be exposed to the guest OS. Possible + values for this attribute are "floppy", "disk", "cdrom", and "lun", + defaulting to "disk". + + Using "lun" (since 0.9.10) is only + valid when type is "block" and the target element's "bus" + attribute is "virtio", and behaves identically to "disk", + except that generic SCSI commands from the guest are accepted + and passed through to the physical device. Also note that + device='lun' will only be recognized for actual raw devices, + but never for individual partitions or LVM partitions (in those + cases, the kernel will reject the generic SCSI commands, making + it identical to device='disk'). + + </dd> + <dt><code>rawio</code> attribute + since 0.9.10</dt> + <dd> + Indicates whether the disk is needs rawio capability; valid + settings are "yes" or "no" (default is "no"). If any one disk + in a domain has rawio='yes', rawio capability will be enabled + for all disks in the domain (because, in the case of QEMU, this + capability can only be set on a per-process basis). This attribute + is only valid when device is "lun". NB, <code>rawio</code> intends + to confine the capability per-device, however, current QEMU + implementation gives the domain process broader capability + than that (per-process basis, affects all the domain disks). + To confine the capability as much as possible for QEMU driver + as this stage, <code>sgio</code> is recommended, it's more + secure than <code>rawio</code>. + </dd> + <dt><code>sgio</code> attribute + since 1.0.2</dt> + <dd> + Indicates whether the kernel will filter unprivileged + SG_IO commands for the disk, valid settings are "filtered" or + "unfiltered". Defaults to "filtered". Similar to <code>rawio</code>, + <code>sgio</code> is only valid for device 'lun'. + </dd> + <dt><code>snapshot</code> attribute + since 0.9.5</dt> + <dd> + Indicates the default behavior of the disk during disk snapshots: + "internal" requires a file format such as qcow2 that can store + both the snapshot and the data changes since the snapshot; + "external" will separate the snapshot from the live data; and + "no" means the disk will not participate in snapshots. Read-only + disks default to "no", while the default for other disks depends + on the hypervisor's capabilities. Some hypervisors allow a + per-snapshot choice as well, during + <a href="formatsnapshot.html">domain snapshot creation</a>. + Not all snapshot modes are supported; for example, + <code>snapshot='yes'</code> with a transient disk generally + does not make sense. + </dd> + </dl> + </dd> <dt><code>source</code></dt> <dd>Representation of the disk <code>source</code> depends on the disk <code>type</code> attribute value as follows: -- 1.8.3.1

2 2

[libvirt] [PATCH] tests: Add URI precedence checking
by Martin Kletzander 22 Aug '13

22 Aug '13

Commit a0b6a36f is fixing what commit abfff210 broke, so to avoid having to deal with this issue again, I present you The "uriprecedencetest". Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- tests/Makefile.am | 2 ++ tests/uriprecedencetest | 77 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) create mode 100755 tests/uriprecedencetest diff --git a/tests/Makefile.am b/tests/Makefile.am index 09144d6..419db8b 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -98,6 +98,7 @@ EXTRA_DIST = \ storagevolxml2xmlout \ sysinfodata \ test-lib.sh \ + uriprecedencetest \ vmx2xmldata \ xencapsdata \ xmconfigdata \ @@ -235,6 +236,7 @@ test_scripts += \ read-bufsiz \ read-non-seekable \ start \ + uriprecedencetest \ vcpupin \ virsh-all \ virsh-optparse \ diff --git a/tests/uriprecedencetest b/tests/uriprecedencetest new file mode 100755 index 0000000..9515e63 --- /dev/null +++ b/tests/uriprecedencetest @@ -0,0 +1,77 @@ +#!/bin/sh + +: ${srcdir=.} +. $srcdir/test-lib.sh + +# This test checks if virsh obeys the proper precedence of different +# URI settings +test_intro "uriprecedencetest" + +virsh_bin="$abs_top_builddir/tools/virsh" +counter=1 +ret=0 + +tmpdir="$(mktemp -d)" +cleanup_() { rm -rf "$tmpdir"; } + +# Create all mock files/directories to avoid permission problems +tmphome="$tmpdir/tmp_home" +export XDG_CONFIG_HOME="$tmpdir/.config" +export XDG_CACHE_HOME="$tmpdir/.cache" +export XDG_RUNTIME_HOME="XDG_CACHE_HOME" + +mkdir -p "$XDG_CONFIG_HOME/libvirt" "$XDG_CONFIG_HOME/virsh" +mkdir -p "$XDG_CACHE_HOME/libvirt" "$XDG_CACHE_HOME/virsh" +mkdir -p "$XDG_RUNTIME_HOME/libvirt" "$XDG_RUNTIME_HOME/virsh" + +# Main function checking for the proper uri being returned +test_uri() +{ + result=0 + if [ "$($virsh_bin uri)" != "$good_uri" ]; then + result=1 + ret=1 + fi + test_result "$counter" "$1" "$result" + counter="$((counter+1))" +} + +# Precedence is the following (lowest priority first): +# +# 1) if run as root, 'uri_default' from /etc/libvirtd/libvirt.conf, +# otherwise qemu:///session. There is no way to mock this file for +# virsh/libvirt.so and the user may have set anything in there that +# would spoil the test, so we don't test this +# +# 2) 'uri_default' from $XDG_CONFIG_HOME/libvirt/libvirt.conf +# +# 3) LIBVIRT_DEFAULT_URI +# +# 4) VIRSH_DEFAULT_CONNECT_URI +# +# 5) parameter -c (--connect) + +unset LIBVIRT_DEFAULT_URI +unset VIRSH_DEFAULT_CONNECT_URI +bad_uri="test:///default?bad_uri" +good_uri="test:///default?good_uri" + +printf "uri_default=\"%s\"\n" "$good_uri" >"$XDG_CONFIG_HOME/libvirt/libvirt.conf" +test_uri "User config file" + +printf "uri_default=\"%s\"\n" "$bad_uri" >"$XDG_CONFIG_HOME/libvirt/libvirt.conf" +export LIBVIRT_DEFAULT_URI="$good_uri" +test_uri "LIBVIRT_DEFAULT_URI" + +export LIBVIRT_DEFAULT_URI="$bad_uri" +export VIRSH_DEFAULT_CONNECT_URI="$good_uri" +test_uri "VIRSH_DEFAULT_CONNECT_URI" + +export VIRSH_DEFAULT_CONNECT_URI="$bad_uri" +virsh_bin="$virsh_bin --connect $good_uri" +test_uri "Parameter" + +# test_uri() increases $counter even for the last test, so we must +# decrement it +test_final "$((counter-1))" "$ret" +(exit "$ret"); exit "$ret" -- 1.8.3.2

2 1

[libvirt] [PATCH] qemuBuildNicDevStr: Add mq=on for multiqueue networking
by Michal Privoznik 22 Aug '13

22 Aug '13

If user requested multiqueue networking, beside multiple /dev/tap and /dev/vhost-net openings, we forgot to pass mq=on onto the -device virtio-net-pci command line. This is advised at: http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature --- Notes: Maybe worth backporting to maintainer branches too. The MQ was introduced in the 1.0.6 release. src/qemu/qemu_command.c | 7 ++++++- src/qemu/qemu_command.h | 1 + src/qemu/qemu_hotplug.c | 4 +++- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index f151173..d73872a 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -4730,6 +4730,7 @@ qemuBuildNicDevStr(virDomainDefPtr def, virDomainNetDefPtr net, int vlan, int bootindex, + bool multiqueue, virQEMUCapsPtr qemuCaps) { virBuffer buf = VIR_BUFFER_INITIALIZER; @@ -4782,6 +4783,8 @@ qemuBuildNicDevStr(virDomainDefPtr def, virDomainVirtioEventIdxTypeToString(net->driver.virtio.event_idx)); } } + if (usingVirtio && multiqueue) + virBufferAddLit(&buf, ",mq=on"); if (vlan == -1) virBufferAsprintf(&buf, ",netdev=host%s", net->info.alias); else @@ -7275,7 +7278,9 @@ qemuBuildInterfaceCommandLine(virCommandPtr cmd, virCommandAddArgList(cmd, "-netdev", host, NULL); } if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE)) { - if (!(nic = qemuBuildNicDevStr(def, net, vlan, bootindex, qemuCaps))) + bool multiqueue = tapfdSize > 1 || vhostfdSize > 1; + if (!(nic = qemuBuildNicDevStr(def, net, vlan, bootindex, + multiqueue, qemuCaps))) goto cleanup; virCommandAddArgList(cmd, "-device", nic, NULL); } else { diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h index 5c5c025..a9854a3 100644 --- a/src/qemu/qemu_command.h +++ b/src/qemu/qemu_command.h @@ -102,6 +102,7 @@ char * qemuBuildNicDevStr(virDomainDefPtr def, virDomainNetDefPtr net, int vlan, int bootindex, + bool multiqueue, virQEMUCapsPtr qemuCaps); char *qemuDeviceDriveHostAlias(virDomainDiskDefPtr disk, diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 478f331..b49073b 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -859,7 +859,9 @@ int qemuDomainAttachNetDevice(virConnectPtr conn, } if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { - if (!(nicstr = qemuBuildNicDevStr(vm->def, net, vlan, 0, priv->qemuCaps))) + bool multiqueue = tapfdSize > 1 || vhostfdSize > 1; + if (!(nicstr = qemuBuildNicDevStr(vm->def, net, vlan, 0, + multiqueue, priv->qemuCaps))) goto try_remove; } else { if (!(nicstr = qemuBuildNicStr(net, NULL, vlan))) -- 1.8.1.5

2 1

[libvirt] [PATCH] LXC: mount a fresh /run directory for container
by Gao feng 22 Aug '13

22 Aug '13

The unix socket file /run/systemd/private is used to send reboot/shutdown messages. and since this type of unix sockets are not per net namespace , they are global resources. systemctl in container can use this unix socket to send shutdown message to the systemd-shutdownd running on host. finally the host will be poweroff. this problem occurs when container shares the same root directory with host. this patch umount host's /run directory and mount the /run directory of container as tmpfs. Signed-off-by: Gao feng <gaofeng(a)cn.fujitsu.com> --- src/lxc/lxc_container.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c index 8abaea0..aae8e6a 100644 --- a/src/lxc/lxc_container.c +++ b/src/lxc/lxc_container.c @@ -772,6 +772,10 @@ static int lxcContainerMountBasicFS(void) { "sysfs", "/sys", "sysfs", NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, { "securityfs", "/sys/kernel/security", "securityfs", NULL, MS_NOSUID|MS_NOEXEC|MS_NODEV }, { "securityfs", "/sys/kernel/security", "securityfs", NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, + /* We should mount /run directory as tmpfs, since it contains some + * global files such as /run/systemd/private which can be used to + * send reboot/shutdown message from container to host. */ + { "tmpfs", "/run", "tmpfs", NULL, MS_NOSUID|MS_NOEXEC|MS_NODEV }, #if WITH_SELINUX { SELINUX_MOUNT, SELINUX_MOUNT, "selinuxfs", NULL, MS_NOSUID|MS_NOEXEC|MS_NODEV }, { SELINUX_MOUNT, SELINUX_MOUNT, NULL, NULL, MS_BIND|MS_REMOUNT|MS_RDONLY }, @@ -1526,6 +1530,7 @@ static int lxcContainerSetupPivotRoot(virDomainDefPtr vmDef, if (STREQ(root->src, "/") && (lxcContainerUnmountSubtree("/sys", false) < 0 || lxcContainerUnmountSubtree("/dev", false) < 0 || + lxcContainerUnmountSubtree("/run", false) < 0 || lxcContainerUnmountSubtree("/proc", false) < 0)) goto cleanup; -- 1.8.3.1

2 6

[libvirt] [PATCH]LXC: force container to enable network namespace
by Chen Hanxiao 22 Aug '13

22 Aug '13

From: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> If we don't enable network namespace, we could shutdown host inside container by command 'shutdown', which is unacceptable. This patch will force users to enable network namespace before they start container. Signed-off-by: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> --- src/lxc/lxc_container.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c index c7a22ab..5631ad7 100644 --- a/src/lxc/lxc_container.c +++ b/src/lxc/lxc_container.c @@ -1937,6 +1937,12 @@ int lxcContainerStart(virDomainDefPtr def, if (lxcNeedNetworkNamespace(def)) { VIR_DEBUG("Enable network namespaces"); cflags |= CLONE_NEWNET; + } else { + errno = EINVAL; + + virReportSystemError(errno, "%s", + _("Network namespace needed")); + return -1; } pid = clone(lxcContainerChild, stacktop, cflags, &args); -- 1.7.1

4 4

[libvirt] Is it a problem that "a vm has been shutdown, but its pidfile has not been removed"
by Wangyufei (A) 22 Aug '13

22 Aug '13

Hello, when do steps as follows: 1. start a vm 2. restart libvirtd service 3. shutdown the vm I found the pidfile associated with the vm has not been removed. Analyzing related piece of code, I found when libvirtd service restarted, the vm's _virDomainObj structure(named dom here) in libvirtd will be re-established according to the vm's state-file or config-file, but its member of privateData.pidfile will not be reassigned value. By the way, qemudriver is used in my libvirt. So when the vm is shutdown, its pidfile will not be removed, because the member of privateData.pidfile is NULL. My questions are : 1. Do you think it is a problem when a vm has been shutdown, but its pidfile has not been removed ? 2. Do you think it is expected that the member of privateData.pidfile's value missed after libvirtd restart? If it's a bug then I'll submit the patch to fix it. Also list the related piece of code about removing the vm's pidfile in libvirt for your information: if (priv->pidfile && unlink(priv->pidfile) < 0 && errno != ENOENT) VIR_WARN("Failed to remove PID file for %s: %s", vm->def->name, virStrerror(errno, ebuf, sizeof(ebuf))); Best Regards, -WangYufei

2 1

[libvirt] [PATCHv2] virBitmapParse: Fix behavior in case of error and fix up callers
by Peter Krempa 22 Aug '13

22 Aug '13

Re-arrange the code so that the returned bitmap is always initialized to NULL even on early failures and return an error message as some callers are already expecting it. Fix up the rest not to shadow the error. --- Version 2: - squashed cleanup of callers into this patch po/POTFILES.in | 1 + src/conf/domain_conf.c | 5 +---- src/conf/network_conf.c | 3 --- src/nodeinfo.c | 5 +---- src/qemu/qemu_driver.c | 2 -- src/util/virbitmap.c | 18 +++++++++--------- src/xenxs/xen_sxpr.c | 5 +---- tests/cpuset | 2 +- 8 files changed, 14 insertions(+), 27 deletions(-) diff --git a/po/POTFILES.in b/po/POTFILES.in index 36d027a..9a83069 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -147,6 +147,7 @@ src/util/viralloc.c src/util/viraudit.c src/util/virauth.c src/util/virauthconfig.c +src/util/virbitmap.c src/util/vircgroup.c src/util/virclosecallbacks.c src/util/vircommand.c diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index ea49d2c..8a187a6 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -10981,11 +10981,8 @@ virDomainDefParseXML(xmlDocPtr xml, tmp = virXPathString("string(./vcpu[1]/@cpuset)", ctxt); if (tmp) { if (virBitmapParse(tmp, 0, &def->cpumask, - VIR_DOMAIN_CPUMASK_LEN) < 0) { - virReportError(VIR_ERR_XML_ERROR, - "%s", _("topology cpuset syntax error")); + VIR_DOMAIN_CPUMASK_LEN) < 0) goto error; - } VIR_FREE(tmp); } } diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c index bbc980b..8aef609 100644 --- a/src/conf/network_conf.c +++ b/src/conf/network_conf.c @@ -2897,9 +2897,6 @@ virNetworkLoadState(virNetworkObjListPtr nets, if ((class_id = virXPathString("string(./class_id[1]/@bitmap)", ctxt))) { if (virBitmapParse(class_id, 0, &class_id_map, CLASS_ID_BITMAP_SIZE) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("Malformed 'class_id' attribute: %s"), - class_id); VIR_FREE(class_id); goto error; } diff --git a/src/nodeinfo.c b/src/nodeinfo.c index 4df4851..33a79b7 100644 --- a/src/nodeinfo.c +++ b/src/nodeinfo.c @@ -1547,11 +1547,8 @@ virNodeGetSiblingsList(const char *dir, int cpu_id) if (virFileReadAll(path, SYSFS_THREAD_SIBLINGS_LIST_LENGTH_MAX, &buf) < 0) goto cleanup; - if (virBitmapParse(buf, 0, &ret, NUMA_MAX_N_CPUS) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Failed to parse thread siblings")); + if (virBitmapParse(buf, 0, &ret, NUMA_MAX_N_CPUS) < 0) goto cleanup; - } cleanup: VIR_FREE(buf); diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 2ad236e..5124f27 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -8357,8 +8357,6 @@ qemuDomainSetNumaParameters(virDomainPtr dom, if (virBitmapParse(params[i].value.s, 0, &nodeset, VIR_DOMAIN_CPUMASK_LEN) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Failed to parse nodeset")); ret = -1; continue; } diff --git a/src/util/virbitmap.c b/src/util/virbitmap.c index 47c678e..289a7b9 100644 --- a/src/util/virbitmap.c +++ b/src/util/virbitmap.c @@ -298,23 +298,21 @@ virBitmapParse(const char *str, size_t bitmapSize) { bool neg = false; - const char *cur; + const char *cur = str; char *tmp; size_t i; int start, last; - if (!str) + if (!(*bitmap = virBitmapNew(bitmapSize))) return -1; - cur = str; - virSkipSpaces(&cur); + if (!str) + goto error; - if (*cur == 0) - return -1; + virSkipSpaces(&cur); - *bitmap = virBitmapNew(bitmapSize); - if (!*bitmap) - return -1; + if (*cur == '\0') + goto error; while (*cur != 0 && *cur != terminator) { /* @@ -384,6 +382,8 @@ virBitmapParse(const char *str, return virBitmapCountBits(*bitmap); error: + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Failed to parse bitmap '%s'"), str); virBitmapFree(*bitmap); *bitmap = NULL; return -1; diff --git a/src/xenxs/xen_sxpr.c b/src/xenxs/xen_sxpr.c index fbbbaa9..6209c68 100644 --- a/src/xenxs/xen_sxpr.c +++ b/src/xenxs/xen_sxpr.c @@ -1160,11 +1160,8 @@ xenParseSxpr(const struct sexpr *root, if (cpus != NULL) { if (virBitmapParse(cpus, 0, &def->cpumask, - VIR_DOMAIN_CPUMASK_LEN) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("invalid CPU mask %s"), cpus); + VIR_DOMAIN_CPUMASK_LEN) < 0) goto error; - } } def->maxvcpus = sexpr_int(root, "domain/vcpus"); diff --git a/tests/cpuset b/tests/cpuset index b617d6f..8bcaae9 100755 --- a/tests/cpuset +++ b/tests/cpuset @@ -42,7 +42,7 @@ sed "s/vcpu placement='static'>/vcpu cpuset='aaa'>/" xml > xml-invalid || fail=1 $abs_top_builddir/tools/virsh --connect test:///default define xml-invalid > out 2>&1 && fail=1 cat <<\EOF > exp || fail=1 error: Failed to define domain from xml-invalid -error: XML error: topology cpuset syntax error +error: internal error: Failed to parse bitmap 'aaa' EOF compare exp out || fail=1 -- 1.8.3.2

2 2

[libvirt] [PATCH] Fix URI connect precedence
by Martin Kletzander 22 Aug '13

22 Aug '13

Commit abfff210 changed the order of vshParseArgv() and vshInit() in order to make fix debugging of parameter parsing. However, vshInit() did a vshReconnect() even though ctl->name wasn't set according to the '-c' parameter yet. In order to keep both issues fixed, I've split the vshInit() into vshInitDebug() and vshInit(). One simple memleak of ctl->name is fixed as a part of this patch, since it is related to the issue it's fixing. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=999323 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- tools/virsh.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index 15f529e..2ea44a6 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -2294,16 +2294,13 @@ vshEventLoop(void *opaque) /* - * Initialize connection. + * Initialize debug settings. */ -static bool -vshInit(vshControl *ctl) +static void +vshInitDebug(vshControl *ctl) { char *debugEnv; - if (ctl->conn) - return false; - if (ctl->debug == VSH_DEBUG_DEFAULT) { /* log level not set from commandline, check env variable */ debugEnv = getenv("VIRSH_DEBUG"); @@ -2328,6 +2325,16 @@ vshInit(vshControl *ctl) } vshOpenLogFile(ctl); +} + +/* + * Initialize connection. + */ +static bool +vshInit(vshControl *ctl) +{ + if (ctl->conn) + return false; /* set up the library error handler */ virSetErrorFunc(NULL, virshErrorHandler); @@ -3017,6 +3024,7 @@ vshParseArgv(vshControl *ctl, int argc, char **argv) ctl->timing = true; break; case 'c': + VIR_FREE(ctl->name); ctl->name = vshStrdup(ctl, optarg); break; case 'v': @@ -3192,12 +3200,10 @@ main(int argc, char **argv) ctl->name = vshStrdup(ctl, defaultConn); } - if (!vshInit(ctl)) { - vshDeinit(ctl); - exit(EXIT_FAILURE); - } + vshInitDebug(ctl); - if (!vshParseArgv(ctl, argc, argv)) { + if (!vshParseArgv(ctl, argc, argv) || + !vshInit(ctl)) { vshDeinit(ctl); exit(EXIT_FAILURE); } -- 1.8.3.2

2 2

[libvirt] [PATCH 0/5] RFC: VMX parsing improvements
by Doug Goldstein 22 Aug '13

22 Aug '13

A user came into #virt the other day and was trying to get libvirtd to work with VMWare Fusion 5, which is basically the Mac OS X version of VMWare Workstation. In helping him out I noticed a few limitations of our VMX parser so I've added support through this patchset. However I came across the fact that we only support 2 types of CD-ROMs instead of the 3 types that VMWare has which leads me to believe we need to extend our XML syntax to define VMWare VMs so I'm asking for feedback and input. CD-ROM types: - cdrom-image = Provides the ISO to the domain - atapi-cdrom = Provides a NEC emulated ATAPI CD-ROM - cdrom-raw = Passthru for a host CD-ROM drive Currently we model 'atapi-cdrom' as (example uses IDE): <disk type='block' device='cdrom'> <source dev='/dev/scd0'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> I was thinking of making that: <disk type='block' device='cdrom'> <driver name='vmware' type='atapi'/> <source dev='/dev/scd0'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> And making 'cdrom-raw' as: <disk type='block' device='cdrom'> <driver name='vmware' type='raw'/> <source dev='/dev/scd0'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> The documentation is a bit ambiguous if I should instead do: <driver name='atapi'/> and <driver name='raw'/> Which is why the request for input. The other reason I'm asking for input is I'm not quite sure what we want to do about CD-ROMs marked as 'auto detect', which is what VMWare Workstation and VMWare Fusion according to their documentation use as the default for 'cdrom-raw' device type. It will either at boot time connect your CD-ROM drive to the VM or dynamically when the user requests it. In this patchset I've modeled it as an opened CD-ROM drive and expect that VMWare will give us a tray closed event or CD-ROM attached event when it gets attached. I unfortunately don't have VMWare and have not used their products in many years so I can't test this myself. Doug Goldstein (5): VMX: Improve disk parse error for unknown values VMX: Add cdrom-raw dev type from VMWare Fusion VMX: Add support for 'auto detect' fileNames VMX: Some serial ports are not actually connected VMX: Add a VMWare Fusion 5 configuration for tests src/vmx/vmx.c | 41 ++++++---- .../vmx2xml-cdrom-ide-raw-auto-detect.vmx | 5 ++ .../vmx2xml-cdrom-ide-raw-auto-detect.xml | 23 ++++++ tests/vmx2xmldata/vmx2xml-cdrom-ide-raw-device.vmx | 5 ++ tests/vmx2xmldata/vmx2xml-cdrom-ide-raw-device.xml | 24 ++++++ tests/vmx2xmldata/vmx2xml-fusion-in-the-wild-1.vmx | 88 ++++++++++++++++++++++ tests/vmx2xmldata/vmx2xml-fusion-in-the-wild-1.xml | 38 ++++++++++ tests/vmx2xmltest.c | 4 + 8 files changed, 214 insertions(+), 14 deletions(-) create mode 100644 tests/vmx2xmldata/vmx2xml-cdrom-ide-raw-auto-detect.vmx create mode 100644 tests/vmx2xmldata/vmx2xml-cdrom-ide-raw-auto-detect.xml create mode 100644 tests/vmx2xmldata/vmx2xml-cdrom-ide-raw-device.vmx create mode 100644 tests/vmx2xmldata/vmx2xml-cdrom-ide-raw-device.xml create mode 100644 tests/vmx2xmldata/vmx2xml-fusion-in-the-wild-1.vmx create mode 100644 tests/vmx2xmldata/vmx2xml-fusion-in-the-wild-1.xml -- 1.8.1.5

2 7

[libvirt] [PATCH v2] bridge driver: implement networkEnableIpForwarding for BSD
by Roman Bogorodskiy 21 Aug '13

21 Aug '13

Implement networkEnableIpForwarding() using BSD style sysctl. --- configure.ac | 7 ++++--- src/network/bridge_driver.c | 13 +++++++++++++ 2 files changed, 17 insertions(+), 3 deletions(-) diff --git a/configure.ac b/configure.ac index d3219ce..cc2213d 100644 --- a/configure.ac +++ b/configure.ac @@ -207,7 +207,8 @@ dnl Availability of various common functions (non-fatal if missing), dnl and various less common threadsafe functions AC_CHECK_FUNCS_ONCE([cfmakeraw geteuid getgid getgrnam_r getmntent_r \ getpwuid_r getuid kill mmap newlocale posix_fallocate posix_memalign \ - prlimit regexec sched_getaffinity setgroups setns setrlimit symlink]) + prlimit regexec sched_getaffinity setgroups setns setrlimit symlink \ + sysctlbyname]) dnl Availability of pthread functions (if missing, win32 threading is dnl assumed). Because of $LIB_PTHREAD, we cannot use AC_CHECK_FUNCS_ONCE. @@ -220,8 +221,8 @@ LIBS=$old_libs dnl Availability of various common headers (non-fatal if missing). AC_CHECK_HEADERS([pwd.h paths.h regex.h sys/un.h \ sys/poll.h syslog.h mntent.h net/ethernet.h linux/magic.h \ - sys/un.h sys/syscall.h netinet/tcp.h ifaddrs.h libtasn1.h \ - sys/ucred.h sys/mount.h]) + sys/un.h sys/syscall.h sys/sysctl.h netinet/tcp.h ifaddrs.h \ + libtasn1.h sys/ucred.h sys/mount.h]) dnl Check whether endian provides handy macros. AC_CHECK_DECLS([htole64], [], [], [[#include <endian.h>]]) diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c index dd30244..80a5bc0 100644 --- a/src/network/bridge_driver.c +++ b/src/network/bridge_driver.c @@ -41,6 +41,9 @@ #include <sys/wait.h> #include <sys/ioctl.h> #include <net/if.h> +#if HAVE_SYS_SYSCTL_H +# include <sys/sysctl.h> +#endif #include "virerror.h" #include "datatypes.h" @@ -1537,10 +1540,20 @@ static int networkEnableIpForwarding(bool enableIPv4, bool enableIPv6) { int ret = 0; +#ifdef HAVE_SYSCTLBYNAME + int enabled = 1; + if (enableIPv4) + ret = sysctlbyname("net.inet.ip.forwarding", NULL, 0, + &enabled, sizeof(enabled)); + if (enableIPv6 && ret == 0) + ret = sysctlbyname("net.inet6.ip6.forwarding", NULL, 0, + &enabled, sizeof(enabled)); +#else if (enableIPv4) ret = virFileWriteStr("/proc/sys/net/ipv4/ip_forward", "1\n", 0); if (enableIPv6 && ret == 0) ret = virFileWriteStr("/proc/sys/net/ipv6/conf/all/forwarding", "1\n", 0); +#endif return ret; } -- 1.8.2.3

2 2