- Devel - libvirt List Archives

[libvirt] [PATCH] conf: use proper maximum for parsing memory values
by Martin Kletzander 30 Oct '14

30 Oct '14

The value is stored in unsigned long long, so ULLONG_MAX is the proper upper limit to use. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- Even though this is a build-breaker (for 32bit systems memtune-unlimited fails to parse), I'm not pushing it as one because it feels odd that such change wouldn't break anything else. src/conf/domain_conf.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index a351382..beb3d26 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -6388,16 +6388,10 @@ virDomainParseMemory(const char *xpath, xmlXPathContextPtr ctxt, unsigned long long *mem, bool required) { int ret = -1; - unsigned long long bytes, max; - - /* On 32-bit machines, our bound is 0xffffffff * KiB. On 64-bit - * machines, our bound is off_t (2^63). */ - if (sizeof(unsigned long) < sizeof(long long)) - max = 1024ull * ULONG_MAX; - else - max = LLONG_MAX; + unsigned long long bytes; - ret = virDomainParseScaledValue(xpath, ctxt, &bytes, 1024, max, required); + ret = virDomainParseScaledValue(xpath, ctxt, &bytes, 1024, + ULLONG_MAX, required); if (ret < 0) goto cleanup; -- 2.1.2

2 5

[libvirt] [PATCH 0/2] network: bandwidth tuning in session mode revert patch
by Erik Skultety 30 Oct '14

30 Oct '14

As Laine noted correctly, we should be testing for privileges on a global scale, when trying to set bandwidth parameters. Therefore I moved the check from qemu_driver.c and qemu_command.c into virnetdevbandwidth.c Erik Skultety (2): qemu: revert patch - bandwidth tuning in session mode Iface: disallow network tuning in session mode globally src/libvirt_private.syms | 4 ++++ src/qemu/qemu_command.c | 11 ----------- src/qemu/qemu_driver.c | 6 ------ src/util/virnetdevbandwidth.c | 31 ++++++++++++++++++++++++------- src/util/virnetdevbandwidthpriv.h | 36 ++++++++++++++++++++++++++++++++++++ tests/virnetdevbandwidthtest.c | 5 +++-- 6 files changed, 67 insertions(+), 26 deletions(-) create mode 100644 src/util/virnetdevbandwidthpriv.h -- 1.9.3

2 4

[libvirt] ceps-based backing stores
by Lyssa P. Livingston 30 Oct '14

30 Oct '14

I have a file with an ceph-based backing store. I run this command: nova boot vm-clone where vm-clone is the rbd-backed file. It generates this command: qemu-img create -f qcow2 -b rbd:rbdpool/disk/instance-00000002.0.disk:conf=/etc/ceph/ceph.conf:id=admin -F raw /mnt/novadisk/nova/instances/3efa8a7b-75a8-4695-8fdd-659185c46b7d/disk and I am getting this error: error: internal error: backing store parser is not implemented for protocol rbd I was under the impression that qemu could work with ceph-based backing stores, so is there something I should run first, or files that I should patch, or ... ??? I am running libvirt 1.2.9. Thanks for any assistance you can provide. Lyssa

2 2

[libvirt] [PATCH V2 0/2] libxl: user-specified domain config improvements
by Jim Fehlig 30 Oct '14

30 Oct '14

V2 of a small series to improve libxl driver's support for user-specified config https://www.redhat.com/archives/libvir-list/2014-September/msg01243.html Patches 1-4 of that series have been pushed. In patch 5, Michal suggested checking that the user-specified emulator is executable. Patch 1 of this series is a respin of patch 5 that includes Michal's suggestion. Patch 2 fixes an issue found while testing. Jim Fehlig (2): libxl: Support user-specified <emulator> libxl: fix double-free of libxl_domain_build_info src/libxl/libxl_conf.c | 48 +++++++++++++++++++++++++++++++++--------------- 1 file changed, 33 insertions(+), 15 deletions(-) -- 1.8.4.5

2 5

[libvirt] [PATCH] Spell TIOCSCTTY right in the error message
by Ján Tomko 30 Oct '14

30 Oct '14

--- src/lxc/lxc_container.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Pushed as trivial. diff --git a/src/lxc/lxc_container.c b/src/lxc/lxc_container.c index 2af2674..f02b959 100644 --- a/src/lxc/lxc_container.c +++ b/src/lxc/lxc_container.c @@ -281,7 +281,7 @@ static int lxcContainerSetupFDs(int *ttyfd, if (ioctl(*ttyfd, TIOCSCTTY, NULL) < 0) { virReportSystemError(errno, "%s", - _("ioctl(TIOCSTTY) failed")); + _("ioctl(TIOCSCTTY) failed")); goto cleanup; } -- 2.0.4

1 0

[libvirt] [PATCH v2 1/2] util: Introduce virPidFileForceCleanupPath
by Martin Kletzander 30 Oct '14

30 Oct '14

This function is used to cleanup a pidfile doing whatever it takes, even killing the owning process. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- v2: - Don't use "/proc", but simply just try to acquire the pidfile. - https://www.redhat.com/archives/libvir-list/2014-October/msg00320.html src/libvirt_private.syms | 1 + src/util/virpidfile.c | 42 ++++++++++++++++++++++++++++++++++++++++++ src/util/virpidfile.h | 2 ++ 3 files changed, 45 insertions(+) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index d6265ac..30d100d 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1810,6 +1810,7 @@ virPidFileBuildPath; virPidFileConstructPath; virPidFileDelete; virPidFileDeletePath; +virPidFileForceCleanupPath; virPidFileRead; virPidFileReadIfAlive; virPidFileReadPath; diff --git a/src/util/virpidfile.c b/src/util/virpidfile.c index a3b8846..a64a1cf 100644 --- a/src/util/virpidfile.c +++ b/src/util/virpidfile.c @@ -37,6 +37,7 @@ #include "c-ctype.h" #include "areadlink.h" #include "virstring.h" +#include "virprocess.h" #define VIR_FROM_THIS VIR_FROM_NONE @@ -567,3 +568,44 @@ virPidFileConstructPath(bool privileged, VIR_FREE(rundir); return ret; } + + +/** + * virPidFileForceCleanupPath: + * + * Check if the pidfile is left around and clean it up whatever it + * takes. This doesn't raise an error. This function must not be + * called multiple times with the same path, be it in threads or + * processes. + * + * Returns 0 if the pidfile was successfully cleaned up, -1 otherwise. + */ +int +virPidFileForceCleanupPath(const char *path) +{ + pid_t pid = 0; + int fd = -1; + + if (!virFileExists(path)) + return 0; + + if (virPidFileReadPath(path, &pid) < 0) + return -1; + + if (virPidFileAcquirePath(path, false, 0) == 0) { + virPidFileReleasePath(path, fd); + } else { + virResetLastError(); + + /* Only kill the process if the pid is valid one. 0 means + * there is somebody else doing the same pidfile cleanup + * machinery. */ + if (pid) + virProcessKillPainfully(pid, true); + + if (virPidFileDeletePath(path) < 0) + return -1; + } + + return 0; +} diff --git a/src/util/virpidfile.h b/src/util/virpidfile.h index ca1dbff..eb6516c 100644 --- a/src/util/virpidfile.h +++ b/src/util/virpidfile.h @@ -74,4 +74,6 @@ int virPidFileConstructPath(bool privileged, const char *progname, char **pidfile); +int virPidFileForceCleanupPath(const char *path) ATTRIBUTE_NONNULL(1); + #endif /* __VIR_PIDFILE_H__ */ -- 2.1.2

2 5

[libvirt] [PATCH] Reject live update of offloading options
by Ján Tomko 30 Oct '14

30 Oct '14

https://bugzilla.redhat.com/show_bug.cgi?id=1155441 --- src/qemu/qemu_hotplug.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 33241fb..d3bf392 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1981,7 +1981,18 @@ qemuDomainChangeNet(virQEMUDriverPtr driver, olddev->driver.virtio.txmode != newdev->driver.virtio.txmode || olddev->driver.virtio.ioeventfd != newdev->driver.virtio.ioeventfd || olddev->driver.virtio.event_idx != newdev->driver.virtio.event_idx || - olddev->driver.virtio.queues != newdev->driver.virtio.queues)) { + olddev->driver.virtio.queues != newdev->driver.virtio.queues || + olddev->driver.virtio.host.csum != newdev->driver.virtio.host.csum || + olddev->driver.virtio.host.gso != newdev->driver.virtio.host.gso || + olddev->driver.virtio.host.tso4 != newdev->driver.virtio.host.tso4 || + olddev->driver.virtio.host.tso6 != newdev->driver.virtio.host.tso6 || + olddev->driver.virtio.host.ecn != newdev->driver.virtio.host.ecn || + olddev->driver.virtio.host.ufo != newdev->driver.virtio.host.ufo || + olddev->driver.virtio.guest.csum != newdev->driver.virtio.guest.csum || + olddev->driver.virtio.guest.tso4 != newdev->driver.virtio.guest.tso4 || + olddev->driver.virtio.guest.tso6 != newdev->driver.virtio.guest.tso6 || + olddev->driver.virtio.guest.ecn != newdev->driver.virtio.guest.ecn || + olddev->driver.virtio.guest.ufo != newdev->driver.virtio.guest.ufo)) { virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s", _("cannot modify virtio network device driver attributes")); goto cleanup; -- 2.0.4

2 1

[libvirt] [PATCH 00/19] vbox: Rewrite the storage driver
by Taowei Luo 30 Oct '14

30 Oct '14

This is the last part of rewriting vbox driver. The approache is almost the same as the previous. Some code problems such as copyright and irregular macros are fixed in this series. Taowei Luo (19): vbox: Fix copyright mistake vbox: Remove VBOX_OBJECT_CHECK macro vbox: move common codes to vbox_common.h vbox: Rewrite vbox-independent functions vbox: Rewrite vboxStoragePoolNumOfVolumes vbox: Rewrite vboxStoragePoolListVolumes vbox: Rewrite vboxStorageVolLookupByName vbox: Rewrite vboxStorageVolLookupByKey vbox: Make FindMedium support old vbox versions vbox: Rewrite vboxStorageVolLookupByPath vbox: Make CreateHardDisk support all vbox versions vbox: Rewrite vboxStorageVolCreateXML vbox: Make IMediumAttachment work with vbox2.2 and 3.0 vbox: Rewrite vboxStorageVolDelete vbox: Rewrite vboxStorageVolGetInfo vbox: Rewrite vboxStorageVolGetXMLDesc vbox: Rewrite vboxStorageVolGetPath vbox: New storage driver vbox: Remove unused things in vbox_tmpl.c po/POTFILES.in | 1 + src/Makefile.am | 11 +- src/vbox/vbox_common.c | 416 +++++++++------ src/vbox/vbox_common.h | 117 +++- src/vbox/vbox_driver.c | 99 +--- src/vbox/vbox_get_driver.h | 3 +- src/vbox/vbox_network.c | 30 +- src/vbox/vbox_storage.c | 959 +++++++++++++++++++++++++++++++++ src/vbox/vbox_tmpl.c | 1186 ++++++----------------------------------- src/vbox/vbox_uniformed_api.h | 30 +- 10 files changed, 1555 insertions(+), 1297 deletions(-) create mode 100644 src/vbox/vbox_storage.c -- 1.7.9.5

3 21

[libvirt] [PATCH v6 0/6] Add non-FreeBSD guest support to Bhyve driver.
by Conrad Meyer 30 Oct '14

30 Oct '14

Drvbhyve hardcodes bhyveload(8) as the host bootloader for guests. bhyveload(8) loader only supports FreeBSD guests. This patch series adds <bootloader> and <bootloader_args> handling to bhyve_command, so libvirt can boot non-FreeBSD guests in Bhyve. Additionally, support for grub-bhyve(1)'s --cons-dev argument is added so that interactive GRUB menus can be manipulated with the domain-configured serial device. See patch logs for further details. Thanks, Conrad Changes in v6: - Simplified domain schema changes; just add bootloader section to HVM-type OS, and make the bootloader tag optional. - Update drvbhyve.html.in copy to explicitly state that interactive bootloaders are unsupported. - Move GRUB device.map file creation out of BuildLoadCmd; instead emit device.map as a string. - Add devicemap contents tests to bhyvexml2argv. Conrad Meyer (6): bhyve: Support /domain/bootloader configuration for non-FreeBSD guests. bhyvexml2argv: Add loader argv tests. domaincommon.rng: Add 'bootloader' to os=hvm schema for Bhyve bhyvexml2argv: Add tests for domain-configured bootloader, args bhyve: Add console support for grub-bhyve bootloader bhyvexml2argv: Add test for grub console support docs/drvbhyve.html.in | 100 ++++++++++- docs/formatdomain.html.in | 4 +- docs/schemas/domaincommon.rng | 17 +- src/bhyve/bhyve_command.c | 186 +++++++++++++++++++-- src/bhyve/bhyve_command.h | 5 +- src/bhyve/bhyve_driver.c | 3 +- src/bhyve/bhyve_process.c | 38 ++++- .../bhyvexml2argv-acpiapic.ldargs | 1 + tests/bhyvexml2argvdata/bhyvexml2argv-base.ldargs | 1 + .../bhyvexml2argv-bhyveload-explicitargs.args | 3 + .../bhyvexml2argv-bhyveload-explicitargs.ldargs | 1 + .../bhyvexml2argv-bhyveload-explicitargs.xml | 23 +++ .../bhyvexml2argvdata/bhyvexml2argv-console.ldargs | 1 + .../bhyvexml2argv-custom-loader.args | 3 + .../bhyvexml2argv-custom-loader.ldargs | 1 + .../bhyvexml2argv-custom-loader.xml | 24 +++ .../bhyvexml2argv-disk-cdrom-grub.args | 3 + .../bhyvexml2argv-disk-cdrom-grub.devmap | 1 + .../bhyvexml2argv-disk-cdrom-grub.ldargs | 2 + .../bhyvexml2argv-disk-cdrom-grub.xml | 23 +++ .../bhyvexml2argv-disk-cdrom.ldargs | 1 + .../bhyvexml2argv-disk-virtio.ldargs | 1 + .../bhyvexml2argv-grub-defaults.args | 3 + .../bhyvexml2argv-grub-defaults.devmap | 1 + .../bhyvexml2argv-grub-defaults.ldargs | 2 + .../bhyvexml2argv-grub-defaults.xml | 23 +++ .../bhyvexml2argvdata/bhyvexml2argv-macaddr.ldargs | 1 + .../bhyvexml2argv-serial-grub.args | 4 + .../bhyvexml2argv-serial-grub.devmap | 1 + .../bhyvexml2argv-serial-grub.ldargs | 2 + .../bhyvexml2argv-serial-grub.xml | 26 +++ .../bhyvexml2argvdata/bhyvexml2argv-serial.ldargs | 1 + tests/bhyvexml2argvtest.c | 65 ++++++- 33 files changed, 532 insertions(+), 39 deletions(-) create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-base.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-bhyveload-explicitargs.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-bhyveload-explicitargs.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-bhyveload-explicitargs.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-console.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-custom-loader.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-custom-loader.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-custom-loader.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-virtio.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-macaddr.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial.ldargs -- 1.9.3

2 8

[libvirt] [PATCH] Teach virt-aa-helper to use TEMPLATE.qemu if the domain is kvm or kqemu
by Cédric Bosdonnat 30 Oct '14

30 Oct '14

Without this patch, kvm and kqemu domains confined with apparmor can't start due to virt-aa-helper not finding TEMPLATE.kvm or TEMPLATE.kqemu. This patch points all kvm-related drivers to TEMPLATE.qemu. --- src/security/virt-aa-helper.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/src/security/virt-aa-helper.c b/src/security/virt-aa-helper.c index 9afc8db..6b95fdb 100644 --- a/src/security/virt-aa-helper.c +++ b/src/security/virt-aa-helper.c @@ -341,15 +341,25 @@ create_profile(const char *profile, const char *profile_name, int tlen, plen; int fd; int rc = -1; + const char *driver_name = NULL; if (virFileExists(profile)) { vah_error(NULL, 0, _("profile exists")); goto end; } + switch (virtType) { + case VIR_DOMAIN_VIRT_QEMU: + case VIR_DOMAIN_VIRT_KQEMU: + case VIR_DOMAIN_VIRT_KVM: + driver_name = "qemu"; + break; + default: + driver_name = virDomainVirtTypeToString(virtType); + } if (virAsprintfQuiet(&template, "%s/TEMPLATE.%s", APPARMOR_DIR "/libvirt", - virDomainVirtTypeToString(virtType)) < 0) { + driver_name) < 0) { vah_error(NULL, 0, _("template name exceeds maximum length")); goto end; } -- 1.8.4.5

3 3