- Devel - libvirt List Archives

[libvirt] [PATCH] qemu: add port check for iscsi host when disk type is network
by Shanzhi Yu 13 Nov '14

13 Nov '14

For network type disk, host port is not checked when source protocol is iscsi, so the error is not sure when with invalid port. If pass -1 to port the error will be error: Failed to start domain rh6-i error: An error occurred, but the cause is unknown Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553 Signed-off-by: Shanzhi Yu <shyu(a)redhat.com> --- src/qemu/qemu_command.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index f674ba9..f806225 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -3016,6 +3016,12 @@ qemuBuildNetworkDriveURI(int protocol, case VIR_STORAGE_NET_PROTOCOL_FTPS: case VIR_STORAGE_NET_PROTOCOL_TFTP: case VIR_STORAGE_NET_PROTOCOL_ISCSI: + if (STRNEQ_NULLABLE(hosts->port,"3260")) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("expected port for iscsi host should be 3260")); + goto cleanup; + } + case VIR_STORAGE_NET_PROTOCOL_GLUSTER: if (nhosts != 1) { virReportError(VIR_ERR_INTERNAL_ERROR, -- 1.9.3

3 5

[libvirt] [PATCH v2] nwfilter: fix deadlock caused updating network device and nwfilter
by Pavel Hrdina 13 Nov '14

13 Nov '14

Commit 6e5c79a1 tried to fix deadlock between nwfilter{Define,Undefine} and starting of guest, but this same deadlock is also for updating/attaching network device to domain. The deadlock was introduced by removing global QEMU driver lock because nwfilter was counting on this lock and ensure that all driver locks are locked inside of nwfilter{Define,Undefine}. This patch extends usage of virNWFilterReadLockFilterUpdates to prevent the deadlock for all possible paths in QEMU driver. LXC and UML drivers still have global lock. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143780 Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> --- src/qemu/qemu_driver.c | 12 ++++++++++++ src/qemu/qemu_migration.c | 3 +++ src/qemu/qemu_process.c | 4 ++++ 3 files changed, 19 insertions(+) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 56e8430..716e9a4 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -5902,6 +5902,8 @@ qemuDomainRestoreFlags(virConnectPtr conn, VIR_DOMAIN_SAVE_PAUSED, -1); + virNWFilterReadLockFilterUpdates(); + fd = qemuDomainSaveImageOpen(driver, path, &def, &header, &xml, (flags & VIR_DOMAIN_SAVE_BYPASS_CACHE) != 0, &wrapperFd, false, false); @@ -5979,6 +5981,7 @@ qemuDomainRestoreFlags(virConnectPtr conn, virFileWrapperFdFree(wrapperFd); if (vm) virObjectUnlock(vm); + virNWFilterUnlockFilterUpdates(); return ret; } @@ -7500,6 +7503,8 @@ static int qemuDomainAttachDeviceFlags(virDomainPtr dom, const char *xml, virCheckFlags(VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG, -1); + virNWFilterReadLockFilterUpdates(); + cfg = virQEMUDriverGetConfig(driver); affect = flags & (VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG); @@ -7616,6 +7621,7 @@ static int qemuDomainAttachDeviceFlags(virDomainPtr dom, const char *xml, virObjectUnlock(vm); virObjectUnref(caps); virObjectUnref(cfg); + virNWFilterUnlockFilterUpdates(); return ret; } @@ -7646,6 +7652,8 @@ static int qemuDomainUpdateDeviceFlags(virDomainPtr dom, VIR_DOMAIN_AFFECT_CONFIG | VIR_DOMAIN_DEVICE_MODIFY_FORCE, -1); + virNWFilterReadLockFilterUpdates(); + cfg = virQEMUDriverGetConfig(driver); affect = flags & (VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG); @@ -7762,6 +7770,7 @@ static int qemuDomainUpdateDeviceFlags(virDomainPtr dom, virObjectUnlock(vm); virObjectUnref(caps); virObjectUnref(cfg); + virNWFilterUnlockFilterUpdates(); return ret; } @@ -14503,6 +14512,8 @@ qemuDomainRevertToSnapshot(virDomainSnapshotPtr snapshot, * and use of FORCE can cause multiple transitions. */ + virNWFilterReadLockFilterUpdates(); + if (!(vm = qemuDomObjFromSnapshot(snapshot))) return -1; @@ -14824,6 +14835,7 @@ qemuDomainRevertToSnapshot(virDomainSnapshotPtr snapshot, virObjectUnlock(vm); virObjectUnref(caps); virObjectUnref(cfg); + virNWFilterUnlockFilterUpdates(); return ret; } diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c index c797206..533bb35 100644 --- a/src/qemu/qemu_migration.c +++ b/src/qemu/qemu_migration.c @@ -2525,6 +2525,8 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, if (virTimeMillisNow(&now) < 0) return -1; + virNWFilterReadLockFilterUpdates(); + if (flags & VIR_MIGRATE_OFFLINE) { if (flags & (VIR_MIGRATE_NON_SHARED_DISK | VIR_MIGRATE_NON_SHARED_INC)) { @@ -2826,6 +2828,7 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver, qemuDomainEventQueue(driver, event); qemuMigrationCookieFree(mig); virObjectUnref(caps); + virNWFilterUnlockFilterUpdates(); return ret; stop: diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 24e5f0f..0078a70 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -3438,6 +3438,8 @@ qemuProcessReconnect(void *opaque) VIR_FREE(data); + virNWFilterReadLockFilterUpdates(); + virObjectLock(obj); cfg = virQEMUDriverGetConfig(driver); @@ -3589,6 +3591,7 @@ qemuProcessReconnect(void *opaque) virObjectUnref(conn); virObjectUnref(cfg); + virNWFilterUnlockFilterUpdates(); return; @@ -3624,6 +3627,7 @@ qemuProcessReconnect(void *opaque) } virObjectUnref(conn); virObjectUnref(cfg); + virNWFilterUnlockFilterUpdates(); } static int -- 2.0.4

2 2

[libvirt] [PATCH] network: Add bandwidth support to ethernet interface
by Anirban Chakraborty 12 Nov '14

12 Nov '14

Ethernet interfaces in libvirt currently do not support bandwidth setting. For example, following xml file for an interface will not apply these settings to corresponding qdiscs. <interface type="ethernet"> <mac address="02:36:1d:18:2a:e4"/> <model type="virtio"/> <script path=""/> <target dev="tap361d182a-e4"/> <bandwidth> <inbound average="984" peak="1024" burst="64"/> <outbound average="2000" peak="2048" burst="128"/> </bandwidth> </interface> Signed-off-by: Anirban Chakraborty <abchak(a)juniper.net> --- src/conf/domain_conf.h | 21 +++++++++++++++++++++ src/lxc/lxc_driver.c | 3 +++ src/lxc/lxc_process.c | 18 +++++++++--------- src/qemu/qemu_command.c | 25 +++++++++++++++++++------ src/qemu/qemu_command.h | 2 ++ src/qemu/qemu_driver.c | 3 +++ src/qemu/qemu_hotplug.c | 12 ++++++++++++ src/qemu/qemu_process.c | 3 +++ src/util/virnetdevmacvlan.c | 10 ---------- src/util/virnetdevmacvlan.h | 1 - 10 files changed, 72 insertions(+), 26 deletions(-) diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 9908d88..40e85d9 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -2848,4 +2848,25 @@ int virDomainObjSetMetadata(virDomainObjPtr vm, bool virDomainDefNeedsPlacementAdvice(virDomainDefPtr def) ATTRIBUTE_NONNULL(1); +static inline bool virNetDevSupportBandwidth(virDomainNetType type) +{ + switch (type) { + case VIR_DOMAIN_NET_TYPE_BRIDGE: + case VIR_DOMAIN_NET_TYPE_NETWORK: + case VIR_DOMAIN_NET_TYPE_DIRECT: + case VIR_DOMAIN_NET_TYPE_ETHERNET: + return true; + case VIR_DOMAIN_NET_TYPE_USER: + case VIR_DOMAIN_NET_TYPE_VHOSTUSER: + case VIR_DOMAIN_NET_TYPE_SERVER: + case VIR_DOMAIN_NET_TYPE_CLIENT: + case VIR_DOMAIN_NET_TYPE_MCAST: + case VIR_DOMAIN_NET_TYPE_INTERNAL: + case VIR_DOMAIN_NET_TYPE_HOSTDEV: + case VIR_DOMAIN_NET_TYPE_LAST: + break; + } + return false; +} + #endif /* __DOMAIN_CONF_H */ diff --git a/src/lxc/lxc_driver.c b/src/lxc/lxc_driver.c index 979382b..8a21af4 100644 --- a/src/lxc/lxc_driver.c +++ b/src/lxc/lxc_driver.c @@ -72,6 +72,7 @@ #include "viraccessapicheck.h" #include "viraccessapichecklxc.h" #include "virhostdev.h" +#include "qemu/qemu_command.h" #define VIR_FROM_THIS VIR_FROM_LXC @@ -4634,6 +4635,8 @@ lxcDomainDetachDeviceNetLive(virDomainObjPtr vm, detach = vm->def->nets[detachidx]; + qemuDomainClearNetBandwidth(vm); + switch (virDomainNetGetActualType(detach)) { case VIR_DOMAIN_NET_TYPE_BRIDGE: case VIR_DOMAIN_NET_TYPE_NETWORK: diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c index ed30c37..3192011 100644 --- a/src/lxc/lxc_process.c +++ b/src/lxc/lxc_process.c @@ -274,11 +274,6 @@ char *virLXCProcessSetupInterfaceBridged(virConnectPtr conn, if (virNetDevSetOnline(parentVeth, true) < 0) goto cleanup; - if (virNetDevBandwidthSet(net->ifname, - virDomainNetGetActualBandwidth(net), - false) < 0) - goto cleanup; - if (net->filter && virDomainConfNWFilterInstantiate(conn, vm->uuid, net) < 0) goto cleanup; @@ -300,6 +295,7 @@ char *virLXCProcessSetupInterfaceDirect(virConnectPtr conn, virNetDevBandwidthPtr bw; virNetDevVPortProfilePtr prof; virLXCDriverConfigPtr cfg = virLXCDriverGetConfig(driver); + const char *linkdev = virDomainNetGetActualDirectDev(net); /* XXX how todo bandwidth controls ? * Since the 'net-ifname' is about to be moved to a different @@ -329,14 +325,13 @@ char *virLXCProcessSetupInterfaceDirect(virConnectPtr conn, if (virNetDevMacVLanCreateWithVPortProfile( net->ifname, &net->mac, - virDomainNetGetActualDirectDev(net), + linkdev, virDomainNetGetActualDirectMode(net), false, def->uuid, - virDomainNetGetActualVirtPortProfile(net), + prof, &res_ifname, VIR_NETDEV_VPORT_PROFILE_OP_CREATE, - cfg->stateDir, - virDomainNetGetActualBandwidth(net), 0) < 0) + cfg->stateDir, 0) < 0) goto cleanup; ret = res_ifname; @@ -450,6 +445,11 @@ static int virLXCProcessSetupInterfaces(virConnectPtr conn, goto cleanup; } + /* set network bandwidth */ + if (virNetDevBandwidthSet(def->nets[i]->ifname, + virDomainNetGetActualBandwidth(def->nets[i]), false) < 0) + goto cleanup; + (*veths)[(*nveths)-1] = veth; /* Make sure all net definitions will have a name in the container */ diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 2e5af4f..7922672 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -191,7 +191,6 @@ qemuPhysIfaceConnect(virDomainDefPtr def, virDomainNetGetActualVirtPortProfile(net), &res_ifname, vmop, cfg->stateDir, - virDomainNetGetActualBandwidth(net), macvlan_create_flags); if (rc >= 0) { virDomainAuditNetDevice(def, net, res_ifname, true); @@ -371,11 +370,6 @@ qemuNetworkIfaceConnect(virDomainDefPtr def, &net->mac) < 0) goto cleanup; - if (virNetDevBandwidthSet(net->ifname, - virDomainNetGetActualBandwidth(net), - false) < 0) - goto cleanup; - if (net->filter && virDomainConfNWFilterInstantiate(conn, def->uuid, net) < 0) { goto cleanup; @@ -7427,6 +7421,13 @@ qemuBuildInterfaceCommandLine(virCommandPtr cmd, goto cleanup; } + /* Set Bandwidth */ + if (virNetDevSupportBandwidth(actualType) && + virNetDevBandwidthSet(net->ifname, + virDomainNetGetActualBandwidth(net), + false) < 0) + goto cleanup; + if ((actualType == VIR_DOMAIN_NET_TYPE_NETWORK || actualType == VIR_DOMAIN_NET_TYPE_BRIDGE || actualType == VIR_DOMAIN_NET_TYPE_ETHERNET || @@ -12463,3 +12464,15 @@ virDomainDefPtr qemuParseCommandLinePid(virCapsPtr qemuCaps, virStringFreeList(progenv); return def; } + +void qemuDomainClearNetBandwidth(virDomainObjPtr vm) +{ + size_t i; + virDomainNetType type; + + for (i = 0; i < vm->def->nnets; i++) { + type = virDomainNetGetActualType(vm->def->nets[i]); + if (virNetDevSupportBandwidth(type)) + virNetDevBandwidthClear(vm->def->nets[i]->ifname); + } +} diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h index aa40c9e..7963a91 100644 --- a/src/qemu/qemu_command.h +++ b/src/qemu/qemu_command.h @@ -277,4 +277,6 @@ int qemuCheckDiskConfig(virDomainDiskDefPtr disk); bool qemuCheckFips(void); + +void qemuDomainClearNetBandwidth(virDomainObjPtr vm); #endif /* __QEMU_COMMAND_H__*/ diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 2eaf77d..6ef1132 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -2196,6 +2196,9 @@ qemuDomainDestroyFlags(virDomainPtr dom, if (virDomainDestroyFlagsEnsureACL(dom->conn, vm->def) < 0) goto cleanup; + /* Clear network bandwidth */ + qemuDomainClearNetBandwidth(vm); + qemuDomainSetFakeReboot(driver, vm, false); diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 33241fb..9eb125f 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -50,6 +50,7 @@ #include "virstring.h" #include "virtime.h" #include "storage/storage_driver.h" +#include "domain_conf.h" #define VIR_FROM_THIS VIR_FROM_QEMU @@ -948,6 +949,12 @@ int qemuDomainAttachNetDevice(virConnectPtr conn, goto cleanup; } + /* Set Bandwidth */ + if (virNetDevSupportBandwidth(actualType) && + virNetDevBandwidthSet(net->ifname, + virDomainNetGetActualBandwidth(net), false) < 0) + goto cleanup; + for (i = 0; i < tapfdSize; i++) { if (virSecurityManagerSetTapFDLabel(driver->securityManager, vm->def, tapfd[i]) < 0) @@ -3536,6 +3543,11 @@ qemuDomainDetachNetDevice(virQEMUDriverPtr driver, goto cleanup; } + if (virNetDevSupportBandwidth(virDomainNetGetActualType(detach)) && + virNetDevBandwidthClear(detach->ifname) < 0) + VIR_WARN("cannot clear bandwidth setting for device : %s", + detach->ifname); + qemuDomainMarkDeviceForRemoval(vm, &detach->info); qemuDomainObjEnterMonitor(driver, vm); diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index ef258cf..21448a5 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -4825,6 +4825,9 @@ void qemuProcessStop(virQEMUDriverPtr driver, virStrerror(errno, ebuf, sizeof(ebuf))); } + /* Clear network bandwidth */ + qemuDomainClearNetBandwidth(vm); + virDomainConfVMNWFilterTeardown(vm); if (cfg->macFilter) { diff --git a/src/util/virnetdevmacvlan.c b/src/util/virnetdevmacvlan.c index c83341c..956a96b 100644 --- a/src/util/virnetdevmacvlan.c +++ b/src/util/virnetdevmacvlan.c @@ -811,7 +811,6 @@ int virNetDevMacVLanCreateWithVPortProfile(const char *tgifname, char **res_ifname, virNetDevVPortProfileOp vmOp, char *stateDir, - virNetDevBandwidthPtr bandwidth, unsigned int flags) { const char *type = (flags & VIR_NETDEV_MACVLAN_CREATE_WITH_TAP) ? @@ -925,14 +924,6 @@ int virNetDevMacVLanCreateWithVPortProfile(const char *tgifname, rc = 0; } - if (virNetDevBandwidthSet(cr_ifname, bandwidth, false) < 0) { - if (flags & VIR_NETDEV_MACVLAN_CREATE_WITH_TAP) - VIR_FORCE_CLOSE(rc); /* sets rc to -1 */ - else - rc = -1; - goto disassociate_exit; - } - if (vmOp == VIR_NETDEV_VPORT_PROFILE_OP_CREATE || vmOp == VIR_NETDEV_VPORT_PROFILE_OP_RESTORE) { /* Only directly register upon a create or restore (restarting @@ -1076,7 +1067,6 @@ int virNetDevMacVLanCreateWithVPortProfile(const char *ifname ATTRIBUTE_UNUSED, char **res_ifname ATTRIBUTE_UNUSED, virNetDevVPortProfileOp vmop ATTRIBUTE_UNUSED, char *stateDir ATTRIBUTE_UNUSED, - virNetDevBandwidthPtr bandwidth ATTRIBUTE_UNUSED, unsigned int flags) { virCheckFlags(0, -1); diff --git a/src/util/virnetdevmacvlan.h b/src/util/virnetdevmacvlan.h index 41aa4e2..f08d32b 100644 --- a/src/util/virnetdevmacvlan.h +++ b/src/util/virnetdevmacvlan.h @@ -68,7 +68,6 @@ int virNetDevMacVLanCreateWithVPortProfile(const char *ifname, char **res_ifname, virNetDevVPortProfileOp vmop, char *stateDir, - virNetDevBandwidthPtr bandwidth, unsigned int flags) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3) ATTRIBUTE_NONNULL(6) ATTRIBUTE_NONNULL(8) ATTRIBUTE_NONNULL(10) ATTRIBUTE_RETURN_CHECK; -- 1.8.2.3

4 9

[libvirt] [PATCH 0/3] qemu: Improve send-key command using input-send-event
by Martin Kletzander 12 Nov '14

12 Nov '14

QEMU added a qmp command input-send-event that is more precise about what the outcome for the guest is; it can control particular events as press/release of a key, button, move of a pointer, etc. This series is still waiting for two patches [1] from Amos Kong to be applied before it can be used and will not be pushed until that change is in upstream QEMU. Martin [1] https://lists.gnu.org/archive/html/qemu-devel/2014-11/msg01187.html Martin Kletzander (3): qemu: Add capability probing for 'imput-send-event' qmp command util: Add virKeycodeValueIsModifier function qemu: Improve qemuMonitorJSONSendKey function src/libvirt_private.syms | 1 + src/qemu/qemu_capabilities.c | 3 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_driver.c | 4 +- src/qemu/qemu_monitor.c | 6 +- src/qemu/qemu_monitor.h | 3 +- src/qemu/qemu_monitor_json.c | 142 ++++++++++++++++++++++++++++++++++++------- src/qemu/qemu_monitor_json.h | 3 +- src/util/virkeycode.c | 21 +++++++ src/util/virkeycode.h | 2 + tests/qemumonitorjsontest.c | 72 ++++++++++++++++++++-- 11 files changed, 226 insertions(+), 32 deletions(-) -- 2.1.3

3 8

[libvirt] [PATCH v2 0/5] Resolve fc_host startup, shutdown issues
by John Ferlan 12 Nov '14

12 Nov '14

This series will replace: http://www.redhat.com/archives/libvir-list/2014-November/msg00197.html There are two bugs being fixed here and having them reviewed together makes things easier in the long run as the last 3 patches depended upon the first 2 being present. https://bugzilla.redhat.com/show_bug.cgi?id=1160565 Patch 1 is as was in the previous set Patch 2 is essentially the same, except the single function checkVhbaSCSIHostParent was split out to generate a getVhbaSCSIHostParent which gets used later on. https://bugzilla.redhat.com/show_bug.cgi?id=1160926 Patch 3 fixes an issue which took a bit of gdb time in order to figure out exactly what was going wrong. Essentially, the exising createVport code had a path which would find the "best available" fc_host to use and save the parent on return so that the deleteVport code would delete the parent. However, the code used a copy of the adapter not a reference to the adapter and thus the change was lost leaving the vHBA on the system. Patch 4 adds a new function to save the StoragePool XML given a configFile. This will be used in the next patch because while having the in memory fchost copy updated does work - if libvirtd dies in between we're back at square 1 reading storage pool config files and not knowing whence we started. Patch 5 adds a new "managed" attribute to the fchost XML. It does this mainly to let the deleteVport know when it should delete the self created vport. Prior to this code, the reliance was that we didn't have a parent provided. However, this causes an issue where if someone used nodedev-create in order to create a vHBA and then tried to use that vHBA in a storage pool we would delete that vHBA when we were done, which may not be expected. Using the managed attribute at creation time will let libvirt know what to do in this case. NOTE: There's still one more issue in the code, but it's a bit trickier to resolve. A libvirt created vport doesn't seem to want to find the LUN's on the initial PoolRefresh that occurs during startup. However, if one does a refresh immediately after starting the pool, the luns show up. It seems perhaps there's some sort of locking issue that won't allow the udevEventHandleCallback to 'add' the new device. John Ferlan (5): storage: Check for valid fc_host parent at startup storage: Ensure fc_host parent matches wwnn/wwpn storage: Don't use a stack copy of the adapter storage: Introduce virStoragePoolSaveConfig storage: Introduce 'managed' for the fchost parent docs/formatstorage.html.in | 28 ++- docs/schemas/basictypes.rng | 5 + src/conf/storage_conf.c | 70 ++++-- src/conf/storage_conf.h | 4 + src/libvirt_private.syms | 1 + src/storage/storage_backend_scsi.c | 237 ++++++++++++++++++--- .../pool-scsi-type-fc-host-managed.xml | 15 ++ .../pool-scsi-type-fc-host-managed.xml | 18 ++ tests/storagepoolxml2xmltest.c | 1 + 9 files changed, 323 insertions(+), 56 deletions(-) create mode 100644 tests/storagepoolxml2xmlin/pool-scsi-type-fc-host-managed.xml create mode 100644 tests/storagepoolxml2xmlout/pool-scsi-type-fc-host-managed.xml -- 1.9.3

2 13

[libvirt] [PATCH v2] qemu: Resolve Coverity DEADCODE.
by Matthias Gatto 12 Nov '14

12 Nov '14

reported here: http://www.redhat.com/archives/libvir-list/2014-November/msg00327.html I could have just remove bool supportMaxOptions variable, but if I had do this, we could not check anymore if the nparams variable is superior to QEMU_NB_BLOCK_IO_TUNE_PARAM_MAX. v2: change following this proposal: http://www.redhat.com/archives/libvir-list/2014-November/msg00379.html --- src/qemu/qemu_driver.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 56e8430..acf2b9a 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -17003,14 +17003,16 @@ qemuDomainGetBlockIoTune(virDomainPtr dom, &persistentDef) < 0) goto endjob; + if (flags & VIR_DOMAIN_AFFECT_LIVE) { + /* If the VM is running, we can check if the current VM can use + * optional parameters or not. We didn't made this check sooner + * because we need vm->privateData which need + * virDomainLiveConfigHelperMethod to do so. */ + priv = vm->privateData; + supportMaxOptions = virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DRIVE_IOTUNE_MAX); + } + if ((*nparams) == 0) { - if (flags & VIR_DOMAIN_AFFECT_LIVE) { - priv = vm->privateData; - /* If the VM is running, we can check if the current VM can use - * optional parameters or not. We didn't made this check sooner - * because we need the VM data to do so. */ - supportMaxOptions = virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DRIVE_IOTUNE_MAX); - } *nparams = supportMaxOptions ? QEMU_NB_BLOCK_IO_TUNE_PARAM_MAX : QEMU_NB_BLOCK_IO_TUNE_PARAM; ret = 0; @@ -17023,7 +17025,6 @@ qemuDomainGetBlockIoTune(virDomainPtr dom, } if (flags & VIR_DOMAIN_AFFECT_LIVE) { - priv = vm->privateData; qemuDomainObjEnterMonitor(driver, vm); ret = qemuMonitorGetBlockIoThrottle(priv->mon, device, &reply, supportMaxOptions); qemuDomainObjExitMonitor(driver, vm); -- 1.8.3.1

2 1

[libvirt] [PATCH 0/2] qemu: Fix Coverity error on throttle.
by Matthias Gatto 12 Nov '14

12 Nov '14

Fix the errors reported by John Ferlan about therse patchs: http://www.redhat.com/archives/libvir-list/2014-November/msg00327.html http://www.redhat.com/archives/libvir-list/2014-November/msg00324.html Matthias Gatto (2): qemu: Fix copy_paste_error in qemuBuildDriveStr. qemu: Fix DEATHCODE error in qemuDomainGetBlockIoTune. src/qemu/qemu_command.c | 2 +- src/qemu/qemu_driver.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) -- 1.8.3.1

3 7

[libvirt] [PATCHv8 0/7] Add non-FreeBSD guest support to Bhyve driver.
by Conrad Meyer 12 Nov '14

12 Nov '14

Drvbhyve hardcodes bhyveload(8) as the host bootloader for guests. bhyveload(8) loader only supports FreeBSD guests. This patch series adds <bootloader> and <bootloader_args> handling to bhyve_command, so libvirt can boot non-FreeBSD guests in Bhyve. Additionally, support for grub-bhyve(1)'s --cons-dev argument is added so that interactive GRUB menus can be manipulated with the domain-configured serial device. See patch logs for further details. Thanks, Conrad Changes in v8: - Fix typo in virBhyveProcessStart that prevented booting bhyve VMs. Conrad Meyer (7): bhyve: Support /domain/bootloader configuration for non-FreeBSD guests. bhyvexml2argv: Add loader argv tests. domaincommon.rng: Add 'bootloader' to os=hvm schema for Bhyve bhyvexml2argv: Add tests for domain-configured bootloader, args bhyve: Probe grub-bhyve for --cons-dev capability bhyve: Add console support for grub-bhyve bootloader bhyvexml2argv: Add test for grub console support docs/drvbhyve.html.in | 100 ++++++++++- docs/formatdomain.html.in | 4 +- docs/schemas/domaincommon.rng | 17 +- src/bhyve/bhyve_capabilities.c | 37 ++++ src/bhyve/bhyve_capabilities.h | 3 + src/bhyve/bhyve_command.c | 189 +++++++++++++++++++-- src/bhyve/bhyve_command.h | 5 +- src/bhyve/bhyve_driver.c | 16 +- src/bhyve/bhyve_driver.h | 2 + src/bhyve/bhyve_process.c | 38 ++++- src/bhyve/bhyve_utils.h | 2 + .../bhyvexml2argv-acpiapic.ldargs | 1 + tests/bhyvexml2argvdata/bhyvexml2argv-base.ldargs | 1 + .../bhyvexml2argv-bhyveload-explicitargs.args | 3 + .../bhyvexml2argv-bhyveload-explicitargs.ldargs | 1 + .../bhyvexml2argv-bhyveload-explicitargs.xml | 23 +++ .../bhyvexml2argvdata/bhyvexml2argv-console.ldargs | 1 + .../bhyvexml2argv-custom-loader.args | 3 + .../bhyvexml2argv-custom-loader.ldargs | 1 + .../bhyvexml2argv-custom-loader.xml | 24 +++ .../bhyvexml2argv-disk-cdrom-grub.args | 3 + .../bhyvexml2argv-disk-cdrom-grub.devmap | 1 + .../bhyvexml2argv-disk-cdrom-grub.ldargs | 2 + .../bhyvexml2argv-disk-cdrom-grub.xml | 23 +++ .../bhyvexml2argv-disk-cdrom.ldargs | 1 + .../bhyvexml2argv-disk-virtio.ldargs | 1 + .../bhyvexml2argv-grub-defaults.args | 3 + .../bhyvexml2argv-grub-defaults.devmap | 1 + .../bhyvexml2argv-grub-defaults.ldargs | 2 + .../bhyvexml2argv-grub-defaults.xml | 23 +++ .../bhyvexml2argvdata/bhyvexml2argv-macaddr.ldargs | 1 + .../bhyvexml2argv-serial-grub-nocons.args | 4 + .../bhyvexml2argv-serial-grub-nocons.devmap | 1 + .../bhyvexml2argv-serial-grub-nocons.ldargs | 2 + .../bhyvexml2argv-serial-grub-nocons.xml | 26 +++ .../bhyvexml2argv-serial-grub.args | 4 + .../bhyvexml2argv-serial-grub.devmap | 1 + .../bhyvexml2argv-serial-grub.ldargs | 2 + .../bhyvexml2argv-serial-grub.xml | 26 +++ .../bhyvexml2argvdata/bhyvexml2argv-serial.ldargs | 1 + tests/bhyvexml2argvtest.c | 71 +++++++- 41 files changed, 631 insertions(+), 39 deletions(-) create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-acpiapic.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-base.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-bhyveload-explicitargs.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-bhyveload-explicitargs.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-bhyveload-explicitargs.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-console.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-custom-loader.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-custom-loader.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-custom-loader.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom-grub.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-cdrom.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-disk-virtio.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-grub-defaults.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-macaddr.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub-nocons.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub-nocons.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub-nocons.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub-nocons.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.args create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.devmap create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.ldargs create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial-grub.xml create mode 100644 tests/bhyvexml2argvdata/bhyvexml2argv-serial.ldargs -- 1.9.3

2 19

[libvirt] [PATCH] qemuxml2argvtest: Run some test only on Linux
by Michal Privoznik 12 Nov '14

12 Nov '14

As I was reviewing bhyve commits, I've noticed qemuxml2argvtest failing for some test cases. This is not bug in qemu driver code rather than being unable to load qemuxml2argvmock on non-Linux platforms. For instance: 318) QEMU XML-2-ARGV numatune-memnode ... libvirt: error : internal error: NUMA node 0 is unavailable FAILED Rather than disabling qemuxml2argvtest on BSD (we do compile qemu driver there) disable only those test cases which require mocking. To achieve that goal new DO_TEST_LINUX() macro is introduced which invokes the test case on Linux only and consume arguments on other systems. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- tests/qemuxml2argvtest.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index fe58a24..623237b 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -575,6 +575,21 @@ mymain(void) FLAG_EXPECT_PARSE_ERROR | FLAG_EXPECT_ERROR, \ __VA_ARGS__) +# ifdef __linux__ + /* This is a macro that invokes test only on Linux. It's + * meant to be called in those cases where qemuxml2argvmock + * cooperation is expected (e.g. we need a fixed time, + * predictable NUMA topology and so on). On non-Linux + * platforms the macro just consume its argument. */ +# define DO_TEST_LINUX(name, ...) \ + DO_TEST_FULL(name, NULL, -1, 0, __VA_ARGS__) +# else /* __linux__ */ +# define DO_TEST_LINUX(name, ...) \ + do { \ + const char *tmp ATTRIBUTE_UNUSED = name; \ + } while (0) +# endif /* __linux__ */ + # define NONE QEMU_CAPS_LAST /* Unset or set all envvars here that are copied in qemudBuildCommandLine @@ -684,14 +699,16 @@ mymain(void) DO_TEST("kvm-features-off", NONE); DO_TEST("hugepages", QEMU_CAPS_MEM_PATH); - DO_TEST("hugepages-pages", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM, - QEMU_CAPS_OBJECT_MEMORY_FILE); + DO_TEST_LINUX("hugepages-pages", QEMU_CAPS_MEM_PATH, + QEMU_CAPS_OBJECT_MEMORY_RAM, + QEMU_CAPS_OBJECT_MEMORY_FILE); DO_TEST("hugepages-pages2", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM, QEMU_CAPS_OBJECT_MEMORY_FILE); DO_TEST("hugepages-pages3", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM, QEMU_CAPS_OBJECT_MEMORY_FILE); - DO_TEST("hugepages-shared", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM, - QEMU_CAPS_OBJECT_MEMORY_FILE); + DO_TEST_LINUX("hugepages-shared", QEMU_CAPS_MEM_PATH, + QEMU_CAPS_OBJECT_MEMORY_RAM, + QEMU_CAPS_OBJECT_MEMORY_FILE); DO_TEST_PARSE_ERROR("hugepages-memaccess-invalid", NONE); DO_TEST_FAILURE("hugepages-pages4", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM, QEMU_CAPS_OBJECT_MEMORY_FILE); @@ -1246,10 +1263,12 @@ mymain(void) DO_TEST("numatune-memory", NONE); DO_TEST_PARSE_ERROR("numatune-memory-invalid-nodeset", NONE); - DO_TEST("numatune-memnode", QEMU_CAPS_NUMA, QEMU_CAPS_OBJECT_MEMORY_RAM); + DO_TEST_LINUX("numatune-memnode", QEMU_CAPS_NUMA, + QEMU_CAPS_OBJECT_MEMORY_RAM); DO_TEST_FAILURE("numatune-memnode", NONE); - DO_TEST("numatune-memnode-no-memory", QEMU_CAPS_NUMA, QEMU_CAPS_OBJECT_MEMORY_RAM); + DO_TEST_LINUX("numatune-memnode-no-memory", QEMU_CAPS_NUMA, + QEMU_CAPS_OBJECT_MEMORY_RAM); DO_TEST_FAILURE("numatune-memnode-no-memory", NONE); DO_TEST("numatune-auto-nodeset-invalid", NONE); -- 2.0.4

2 1

[libvirt] [PATCH v6 0/7] qemu: Introduce support for new the block_set_io_throttle parameters add in the version 1.7 of qemu.
by Matthias Gatto 12 Nov '14

12 Nov '14

This series of patches add support for bps_max, bps_rd_max, bps_wr_max, bps_max, bps_rd_max, bps_wr_max, and iops_size in the functions qemuDomainSetBlockIoTune and qemuDomainGetBlockIoTune. The last patch add support for these parameters to the virsh blkdeviotune command. v2: -Spellfix v3: -Merge patch 1/9,2/9,5/9 together. -Change the capability detection.(patch 2/7 and 3/7). -Try to make the usage of QEMU_NB_BLOCK_IO_TUNE_PARAM_MAX more explicit(patch 3/7). v4: -Rebase on HEAD. -Update qemu_driver to comply with Pavel's patchs.(patch 3/6) -Remove the qemu_monitor_text modification.(remove old patch 5/7) v5: -Split patch 1/6 in two. -Add documentation for the new xml options (patch 2/7) -Change (void) to ATTRIBUTE_UNUSED (patch 4/7) -Capability detection of supportMaxOptions move before usage of supportMaxOptions (patch 4/7) v6: -Spellfix -Add comment (patch 4/7, 5/7) -Undo the modification of the supportMaxOptions made in the v5 because it was creating bugs(patch 4/5) The 2 first patches have been reviewed by Eric Blake and sould be merge soon The 3rd patch have been reviewed by Michal Privoznik and ack Matthias Gatto (7): qemu: Add define for the new throttle options qemu: Modify the structure _virDomainBlockIoTuneInfo. qemu: Add Qemu capability for bps_max and friends qemu: Add bps_max and friends qemu driver qemu: Add bps_max and friends QMP suport qemu: Add bps_max and friends to qemu command generation virsh: Add bps_max and friends to virsh docs/formatdomain.html.in | 25 ++++ docs/schemas/domaincommon.rng | 43 ++++++ include/libvirt/libvirt-domain.h | 110 ++++++++++++++++ src/conf/domain_conf.c | 109 +++++++++++++++- src/conf/domain_conf.h | 7 + src/qemu/qemu_capabilities.c | 2 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 57 +++++++- src/qemu/qemu_driver.c | 187 ++++++++++++++++++++++++++- src/qemu/qemu_monitor.c | 10 +- src/qemu/qemu_monitor.h | 6 +- src/qemu/qemu_monitor_json.c | 66 ++++++++-- src/qemu/qemu_monitor_json.h | 6 +- tests/qemucapabilitiesdata/caps_2.1.1-1.caps | 1 + tests/qemumonitorjsontest.c | 6 +- tools/virsh-domain.c | 119 +++++++++++++++++ tools/virsh.pod | 10 ++ 17 files changed, 732 insertions(+), 33 deletions(-) -- 1.8.3.1

3 15